d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
227bb849d3
freebsd-skq/sys/dev/atkbdc/psm.c
Oleksandr Tymoshenko dcc414b888 [psm] Fix choosing wrong mode for synaptic device + trackpoint 
With guest trackpoint present trackpoint probing switched synaptics
device to absolute mode with different protocol instead of keeping it
in relative mode.

PR:		213757
Submitted by:	Vladimir Kondratyev <wulf@cicgroup.ru>
MFC after:	1 week
2016-11-02 01:27:20 +00:00

6557 lines
186 KiB
C
Raw Blame History

/*-
* Copyright (c) 1992, 1993 Erik Forsberg.
* Copyright (c) 1996, 1997 Kazutaka YOKOTA.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Ported to 386bsd Oct 17, 1992
* Sandi Donno, Computer Science, University of Cape Town, South Africa
* Please send bug reports to sandi@cs.uct.ac.za
*
* Thanks are also due to Rick Macklem, rick@snowhite.cis.uoguelph.ca -
* although I was only partially successful in getting the alpha release
* of his "driver for the Logitech and ATI Inport Bus mice for use with
* 386bsd and the X386 port" to work with my Microsoft mouse, I nevertheless
* found his code to be an invaluable reference when porting this driver
* to 386bsd.
*
* Further modifications for latest 386BSD+patchkit and port to NetBSD,
* Andrew Herbert <andrew@werple.apana.org.au> - 8 June 1993
*
* Cloned from the Microsoft Bus Mouse driver, also by Erik Forsberg, by
* Andrew Herbert - 12 June 1993
*
* Modified for PS/2 mouse by Charles Hannum <mycroft@ai.mit.edu>
* - 13 June 1993
*
* Modified for PS/2 AUX mouse by Shoji Yuen <yuen@nuie.nagoya-u.ac.jp>
* - 24 October 1993
*
* Hardware access routines and probe logic rewritten by
* Kazutaka Yokota <yokota@zodiac.mech.utsunomiya-u.ac.jp>
* - 3, 14, 22 October 1996.
* - 12 November 1996. IOCTLs and rearranging `psmread', `psmioctl'...
* - 14, 30 November 1996. Uses `kbdio.c'.
* - 13 December 1996. Uses queuing version of `kbdio.c'.
* - January/February 1997. Tweaked probe logic for
* HiNote UltraII/Latitude/Armada laptops.
* - 30 July 1997. Added APM support.
* - 5 March 1997. Defined driver configuration flags (PSM_CONFIG_XXX).
* Improved sync check logic.
* Vendor specific support routines.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_isa.h"
#include "opt_psm.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/filio.h>
#include <sys/poll.h>
#include <sys/sigio.h>
#include <sys/signalvar.h>
#include <sys/syslog.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <sys/selinfo.h>
#include <sys/sysctl.h>
#include <sys/time.h>
#include <sys/uio.h>
#include <sys/libkern.h>
#include <sys/limits.h>
#include <sys/mouse.h>
#include <machine/resource.h>
#ifdef DEV_ISA
#include <isa/isavar.h>
#endif
#include <dev/atkbdc/atkbdcreg.h>
#include <dev/atkbdc/psm.h>
/*
* Driver specific options: the following options may be set by
* `options' statements in the kernel configuration file.
*/
/* debugging */
#ifndef PSM_DEBUG
#define PSM_DEBUG 0 /*
* logging: 0: none, 1: brief, 2: verbose
* 3: sync errors, 4: all packets
*/
#endif
#define VLOG(level, args) do { \
if (verbose >= level) \
log args; \
} while (0)
#ifndef PSM_INPUT_TIMEOUT
#define PSM_INPUT_TIMEOUT 2000000 /* 2 sec */
#endif
#ifndef PSM_TAP_TIMEOUT
#define PSM_TAP_TIMEOUT 125000
#endif
#ifndef PSM_TAP_THRESHOLD
#define PSM_TAP_THRESHOLD 25
#endif
/* end of driver specific options */
#define PSMCPNP_DRIVER_NAME "psmcpnp"
/* input queue */
#define PSM_BUFSIZE 960
#define PSM_SMALLBUFSIZE 240
/* operation levels */
#define PSM_LEVEL_BASE 0
#define PSM_LEVEL_STANDARD 1
#define PSM_LEVEL_NATIVE 2
#define PSM_LEVEL_MIN PSM_LEVEL_BASE
#define PSM_LEVEL_MAX PSM_LEVEL_NATIVE
/* Logitech PS2++ protocol */
#define MOUSE_PS2PLUS_CHECKBITS(b) \
((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f))
#define MOUSE_PS2PLUS_PACKET_TYPE(b) \
(((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4))
/* ring buffer */
typedef struct ringbuf {
int count; /* # of valid elements in the buffer */
int head; /* head pointer */
int tail; /* tail poiner */
u_char buf[PSM_BUFSIZE];
} ringbuf_t;
/* data buffer */
typedef struct packetbuf {
u_char ipacket[16]; /* interim input buffer */
int inputbytes; /* # of bytes in the input buffer */
} packetbuf_t;
#ifndef PSM_PACKETQUEUE
#define PSM_PACKETQUEUE 128
#endif
typedef struct synapticsinfo {
struct sysctl_ctx_list sysctl_ctx;
struct sysctl_oid *sysctl_tree;
int directional_scrolls;
int two_finger_scroll;
int min_pressure;
int max_pressure;
int max_width;
int margin_top;
int margin_right;
int margin_bottom;
int margin_left;
int na_top;
int na_right;
int na_bottom;
int na_left;
int window_min;
int window_max;
int multiplicator;
int weight_current;
int weight_previous;
int weight_previous_na;
int weight_len_squared;
int div_min;
int div_max;
int div_max_na;
int div_len;
int tap_max_delta;
int tap_min_queue;
int taphold_timeout;
int vscroll_ver_area;
int vscroll_hor_area;
int vscroll_min_delta;
int vscroll_div_min;
int vscroll_div_max;
int touchpad_off;
int softbuttons_y;
int softbutton2_x;
int softbutton3_x;
int max_x;
int max_y;
} synapticsinfo_t;
typedef struct synapticspacket {
int x;
int y;
} synapticspacket_t;
#define SYNAPTICS_PACKETQUEUE 10
#define SYNAPTICS_QUEUE_CURSOR(x) \
(x + SYNAPTICS_PACKETQUEUE) % SYNAPTICS_PACKETQUEUE
#define SYNAPTICS_VERSION_GE(synhw, major, minor) \
((synhw).infoMajor > (major) || \
((synhw).infoMajor == (major) && (synhw).infoMinor >= (minor)))
typedef struct smoother {
synapticspacket_t queue[SYNAPTICS_PACKETQUEUE];
int queue_len;
int queue_cursor;
int start_x;
int start_y;
int avg_dx;
int avg_dy;
int squelch_x;
int squelch_y;
int is_fuzzy;
int active;
} smoother_t;
typedef struct gesture {
int window_min;
int fingers_nb;
int tap_button;
int in_taphold;
int in_vscroll;
int zmax; /* maximum pressure value */
struct timeval taptimeout; /* tap timeout for touchpads */
} gesture_t;
enum {
TRACKPOINT_SYSCTL_SENSITIVITY,
TRACKPOINT_SYSCTL_NEGATIVE_INERTIA,
TRACKPOINT_SYSCTL_UPPER_PLATEAU,
TRACKPOINT_SYSCTL_BACKUP_RANGE,
TRACKPOINT_SYSCTL_DRAG_HYSTERESIS,
TRACKPOINT_SYSCTL_MINIMUM_DRAG,
TRACKPOINT_SYSCTL_UP_THRESHOLD,
TRACKPOINT_SYSCTL_THRESHOLD,
TRACKPOINT_SYSCTL_JENKS_CURVATURE,
TRACKPOINT_SYSCTL_Z_TIME,
TRACKPOINT_SYSCTL_PRESS_TO_SELECT,
TRACKPOINT_SYSCTL_SKIP_BACKUPS
};
typedef struct trackpointinfo {
struct sysctl_ctx_list sysctl_ctx;
struct sysctl_oid *sysctl_tree;
int sensitivity;
int inertia;
int uplateau;
int reach;
int draghys;
int mindrag;
int upthresh;
int threshold;
int jenks;
int ztime;
int pts;
int skipback;
} trackpointinfo_t;
typedef struct finger {
int x;
int y;
int p;
int w;
int flags;
} finger_t;
#define PSM_FINGERS 2 /* # of processed fingers */
#define PSM_FINGER_IS_PEN (1<<0)
#define PSM_FINGER_FUZZY (1<<1)
#define PSM_FINGER_DEFAULT_P tap_threshold
#define PSM_FINGER_DEFAULT_W 1
#define PSM_FINGER_IS_SET(f) ((f).x != -1 && (f).y != -1 && (f).p != 0)
#define PSM_FINGER_RESET(f) do { \
(f) = (finger_t) { .x = -1, .y = -1, .p = 0, .w = 0, .flags = 0 }; \
} while (0)
typedef struct elantechhw {
int hwversion;
int fwversion;
int sizex;
int sizey;
int dpmmx;
int dpmmy;
int ntracesx;
int ntracesy;
int issemimt;
int isclickpad;
int hascrc;
int hastrackpoint;
int haspressure;
} elantechhw_t;
/* minimum versions supported by this driver */
#define ELANTECH_HW_IS_V1(fwver) ((fwver) < 0x020030 || (fwver) == 0x020600)
#define ELANTECH_MAGIC(magic) \
((magic)[0] == 0x3c && (magic)[1] == 0x03 && \
((magic)[2] == 0xc8 || (magic)[2] == 0x00))
#define ELANTECH_FW_ID 0x00
#define ELANTECH_FW_VERSION 0x01
#define ELANTECH_CAPABILITIES 0x02
#define ELANTECH_SAMPLE 0x03
#define ELANTECH_RESOLUTION 0x04
#define ELANTECH_REG_READ 0x10
#define ELANTECH_REG_WRITE 0x11
#define ELANTECH_REG_RDWR 0x00
#define ELANTECH_CUSTOM_CMD 0xf8
#define ELANTECH_MAX_FINGERS PSM_FINGERS
#define ELANTECH_FINGER_SET_XYP(pb) (finger_t) { \
.x = (((pb)->ipacket[1] & 0x0f) << 8) | (pb)->ipacket[2], \
.y = (((pb)->ipacket[4] & 0x0f) << 8) | (pb)->ipacket[5], \
.p = ((pb)->ipacket[1] & 0xf0) | (((pb)->ipacket[4] >> 4) & 0x0f), \
.w = PSM_FINGER_DEFAULT_W, \
.flags = 0 \
}
enum {
ELANTECH_PKT_NOP,
ELANTECH_PKT_TRACKPOINT,
ELANTECH_PKT_V2_COMMON,
ELANTECH_PKT_V2_2FINGER,
ELANTECH_PKT_V3,
ELANTECH_PKT_V4_STATUS,
ELANTECH_PKT_V4_HEAD,
ELANTECH_PKT_V4_MOTION
};
#define ELANTECH_PKT_IS_TRACKPOINT(pb) (((pb)->ipacket[3] & 0x0f) == 0x06)
#define ELANTECH_PKT_IS_DEBOUNCE(pb, hwversion) ((hwversion) == 4 ? 0 : \
(pb)->ipacket[0] == ((hwversion) == 2 ? 0x84 : 0xc4) && \
(pb)->ipacket[1] == 0xff && (pb)->ipacket[2] == 0xff && \
(pb)->ipacket[3] == 0x02 && (pb)->ipacket[4] == 0xff && \
(pb)->ipacket[5] == 0xff)
#define ELANTECH_PKT_IS_V2(pb) \
(((pb)->ipacket[0] & 0x0c) == 0x04 && ((pb)->ipacket[3] & 0x0f) == 0x02)
#define ELANTECH_PKT_IS_V3_HEAD(pb, hascrc) ((hascrc) ? \
((pb)->ipacket[3] & 0x09) == 0x08 : \
((pb)->ipacket[0] & 0x0c) == 0x04 && ((pb)->ipacket[3] & 0xcf) == 0x02)
#define ELANTECH_PKT_IS_V3_TAIL(pb, hascrc) ((hascrc) ? \
((pb)->ipacket[3] & 0x09) == 0x09 : \
((pb)->ipacket[0] & 0x0c) == 0x0c && ((pb)->ipacket[3] & 0xce) == 0x0c)
#define ELANTECH_PKT_IS_V4(pb, hascrc) ((hascrc) ? \
((pb)->ipacket[3] & 0x08) == 0x00 : \
((pb)->ipacket[0] & 0x0c) == 0x04 && ((pb)->ipacket[3] & 0x1c) == 0x10)
typedef struct elantechaction {
finger_t fingers[ELANTECH_MAX_FINGERS];
int mask;
} elantechaction_t;
/* driver control block */
struct psm_softc { /* Driver status information */
int unit;
struct selinfo rsel; /* Process selecting for Input */
u_char state; /* Mouse driver state */
int config; /* driver configuration flags */
int flags; /* other flags */
KBDC kbdc; /* handle to access kbd controller */
struct resource *intr; /* IRQ resource */
void *ih; /* interrupt handle */
mousehw_t hw; /* hardware information */
synapticshw_t synhw; /* Synaptics hardware information */
synapticsinfo_t syninfo; /* Synaptics configuration */
smoother_t smoother[PSM_FINGERS]; /* Motion smoothing */
gesture_t gesture; /* Gesture context */
elantechhw_t elanhw; /* Elantech hardware information */
elantechaction_t elanaction; /* Elantech action context */
int tphw; /* TrackPoint hardware information */
trackpointinfo_t tpinfo; /* TrackPoint configuration */
mousemode_t mode; /* operation mode */
mousemode_t dflt_mode; /* default operation mode */
mousestatus_t status; /* accumulated mouse movement */
ringbuf_t queue; /* mouse status queue */
packetbuf_t pqueue[PSM_PACKETQUEUE]; /* mouse data queue */
int pqueue_start; /* start of data in queue */
int pqueue_end; /* end of data in queue */
int button; /* the latest button state */
int xold; /* previous absolute X position */
int yold; /* previous absolute Y position */
int xaverage; /* average X position */
int yaverage; /* average Y position */
int squelch; /* level to filter movement at low speed */
int syncerrors; /* # of bytes discarded to synchronize */
int pkterrors; /* # of packets failed during quaranteen. */
struct timeval inputtimeout;
struct timeval lastsoftintr; /* time of last soft interrupt */
struct timeval lastinputerr; /* time last sync error happened */
struct timeval idletimeout;
packetbuf_t idlepacket; /* packet to send after idle timeout */
int watchdog; /* watchdog timer flag */
struct callout callout; /* watchdog timer call out */
struct callout softcallout; /* buffer timer call out */
struct cdev *dev;
struct cdev *bdev;
int lasterr;
int cmdcount;
struct sigio *async; /* Processes waiting for SIGIO */
int extended_buttons;
};
static devclass_t psm_devclass;
/* driver state flags (state) */
#define PSM_VALID 0x80
#define PSM_OPEN 1 /* Device is open */
#define PSM_ASLP 2 /* Waiting for mouse data */
#define PSM_SOFTARMED 4 /* Software interrupt armed */
#define PSM_NEED_SYNCBITS 8 /* Set syncbits using next data pkt */
/* driver configuration flags (config) */
#define PSM_CONFIG_RESOLUTION 0x000f /* resolution */
#define PSM_CONFIG_ACCEL 0x00f0 /* acceleration factor */
#define PSM_CONFIG_NOCHECKSYNC 0x0100 /* disable sync. test */
#define PSM_CONFIG_NOIDPROBE 0x0200 /* disable mouse model probe */
#define PSM_CONFIG_NORESET 0x0400 /* don't reset the mouse */
#define PSM_CONFIG_FORCETAP 0x0800 /* assume `tap' action exists */
#define PSM_CONFIG_IGNPORTERROR 0x1000 /* ignore error in aux port test */
#define PSM_CONFIG_HOOKRESUME 0x2000 /* hook the system resume event */
#define PSM_CONFIG_INITAFTERSUSPEND 0x4000 /* init the device at the resume event */
#define PSM_CONFIG_FLAGS \
(PSM_CONFIG_RESOLUTION | \
PSM_CONFIG_ACCEL | \
PSM_CONFIG_NOCHECKSYNC | \
PSM_CONFIG_NOIDPROBE | \
PSM_CONFIG_NORESET | \
PSM_CONFIG_FORCETAP | \
PSM_CONFIG_IGNPORTERROR | \
PSM_CONFIG_HOOKRESUME | \
PSM_CONFIG_INITAFTERSUSPEND)
/* other flags (flags) */
#define PSM_FLAGS_FINGERDOWN 0x0001 /* VersaPad finger down */
#define kbdcp(p) ((atkbdc_softc_t *)(p))
#define ALWAYS_RESTORE_CONTROLLER(kbdc) !(kbdcp(kbdc)->quirks \
& KBDC_QUIRK_KEEP_ACTIVATED)
/* Tunables */
static int tap_enabled = -1;
static int verbose = PSM_DEBUG;
static int synaptics_support = 0;
static int trackpoint_support = 0;
static int elantech_support = 0;
/* for backward compatibility */
#define OLD_MOUSE_GETHWINFO _IOR('M', 1, old_mousehw_t)
#define OLD_MOUSE_GETMODE _IOR('M', 2, old_mousemode_t)
#define OLD_MOUSE_SETMODE _IOW('M', 3, old_mousemode_t)
typedef struct old_mousehw {
int buttons;
int iftype;
int type;
int hwid;
} old_mousehw_t;
typedef struct old_mousemode {
int protocol;
int rate;
int resolution;
int accelfactor;
} old_mousemode_t;
#define SYN_OFFSET(field) offsetof(struct psm_softc, syninfo.field)
enum {
SYNAPTICS_SYSCTL_MIN_PRESSURE = SYN_OFFSET(min_pressure),
SYNAPTICS_SYSCTL_MAX_PRESSURE = SYN_OFFSET(max_pressure),
SYNAPTICS_SYSCTL_MAX_WIDTH = SYN_OFFSET(max_width),
SYNAPTICS_SYSCTL_MARGIN_TOP = SYN_OFFSET(margin_top),
SYNAPTICS_SYSCTL_MARGIN_RIGHT = SYN_OFFSET(margin_right),
SYNAPTICS_SYSCTL_MARGIN_BOTTOM = SYN_OFFSET(margin_bottom),
SYNAPTICS_SYSCTL_MARGIN_LEFT = SYN_OFFSET(margin_left),
SYNAPTICS_SYSCTL_NA_TOP = SYN_OFFSET(na_top),
SYNAPTICS_SYSCTL_NA_RIGHT = SYN_OFFSET(na_right),
SYNAPTICS_SYSCTL_NA_BOTTOM = SYN_OFFSET(na_bottom),
SYNAPTICS_SYSCTL_NA_LEFT = SYN_OFFSET(na_left),
SYNAPTICS_SYSCTL_WINDOW_MIN = SYN_OFFSET(window_min),
SYNAPTICS_SYSCTL_WINDOW_MAX = SYN_OFFSET(window_max),
SYNAPTICS_SYSCTL_MULTIPLICATOR = SYN_OFFSET(multiplicator),
SYNAPTICS_SYSCTL_WEIGHT_CURRENT = SYN_OFFSET(weight_current),
SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS = SYN_OFFSET(weight_previous),
SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA = SYN_OFFSET(weight_previous_na),
SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED = SYN_OFFSET(weight_len_squared),
SYNAPTICS_SYSCTL_DIV_MIN = SYN_OFFSET(div_min),
SYNAPTICS_SYSCTL_DIV_MAX = SYN_OFFSET(div_max),
SYNAPTICS_SYSCTL_DIV_MAX_NA = SYN_OFFSET(div_max_na),
SYNAPTICS_SYSCTL_DIV_LEN = SYN_OFFSET(div_len),
SYNAPTICS_SYSCTL_TAP_MAX_DELTA = SYN_OFFSET(tap_max_delta),
SYNAPTICS_SYSCTL_TAP_MIN_QUEUE = SYN_OFFSET(tap_min_queue),
SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT = SYN_OFFSET(taphold_timeout),
SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA = SYN_OFFSET(vscroll_hor_area),
SYNAPTICS_SYSCTL_VSCROLL_VER_AREA = SYN_OFFSET(vscroll_ver_area),
SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA = SYN_OFFSET(vscroll_min_delta),
SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN = SYN_OFFSET(vscroll_div_min),
SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX = SYN_OFFSET(vscroll_div_max),
SYNAPTICS_SYSCTL_TOUCHPAD_OFF = SYN_OFFSET(touchpad_off),
SYNAPTICS_SYSCTL_SOFTBUTTONS_Y = SYN_OFFSET(softbuttons_y),
SYNAPTICS_SYSCTL_SOFTBUTTON2_X = SYN_OFFSET(softbutton2_x),
SYNAPTICS_SYSCTL_SOFTBUTTON3_X = SYN_OFFSET(softbutton3_x),
};
/* packet formatting function */
typedef int packetfunc_t(struct psm_softc *, u_char *, int *, int,
mousestatus_t *);
/* function prototypes */
static void psmidentify(driver_t *, device_t);
static int psmprobe(device_t);
static int psmattach(device_t);
static int psmdetach(device_t);
static int psmresume(device_t);
static d_open_t psmopen;
static d_close_t psmclose;
static d_read_t psmread;
static d_write_t psmwrite;
static d_ioctl_t psmioctl;
static d_poll_t psmpoll;
static int enable_aux_dev(KBDC);
static int disable_aux_dev(KBDC);
static int get_mouse_status(KBDC, int *, int, int);
static int get_aux_id(KBDC);
static int set_mouse_sampling_rate(KBDC, int);
static int set_mouse_scaling(KBDC, int);
static int set_mouse_resolution(KBDC, int);
static int set_mouse_mode(KBDC);
static int get_mouse_buttons(KBDC);
static int is_a_mouse(int);
static void recover_from_error(KBDC);
static int restore_controller(KBDC, int);
static int doinitialize(struct psm_softc *, mousemode_t *);
static int doopen(struct psm_softc *, int);
static int reinitialize(struct psm_softc *, int);
static char *model_name(int);
static void psmsoftintr(void *);
static void psmsoftintridle(void *);
static void psmintr(void *);
static void psmtimeout(void *);
static int timeelapsed(const struct timeval *, int, int,
const struct timeval *);
static void dropqueue(struct psm_softc *);
static void flushpackets(struct psm_softc *);
static void proc_mmanplus(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static int proc_synaptics(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static void proc_versapad(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static int proc_elantech(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static int psmpalmdetect(struct psm_softc *, finger_t *, int);
static void psmgestures(struct psm_softc *, finger_t *, int,
mousestatus_t *);
static void psmsmoother(struct psm_softc *, finger_t *, int,
mousestatus_t *, int *, int *);
static int tame_mouse(struct psm_softc *, packetbuf_t *, mousestatus_t *,
u_char *);
/* vendor specific features */
enum probearg { PROBE, REINIT };
typedef int probefunc_t(struct psm_softc *, enum probearg);
static int mouse_id_proc1(KBDC, int, int, int *);
static int mouse_ext_command(KBDC, int);
static probefunc_t enable_groller;
static probefunc_t enable_gmouse;
static probefunc_t enable_aglide;
static probefunc_t enable_kmouse;
static probefunc_t enable_msexplorer;
static probefunc_t enable_msintelli;
static probefunc_t enable_4dmouse;
static probefunc_t enable_4dplus;
static probefunc_t enable_mmanplus;
static probefunc_t enable_synaptics;
static probefunc_t enable_trackpoint;
static probefunc_t enable_versapad;
static probefunc_t enable_elantech;
static void set_trackpoint_parameters(struct psm_softc *sc);
static void synaptics_passthrough_on(struct psm_softc *sc);
static void synaptics_passthrough_off(struct psm_softc *sc);
static int synaptics_preferred_mode(struct psm_softc *sc);
static void synaptics_set_mode(struct psm_softc *sc, int mode_byte);
static struct {
int model;
u_char syncmask;
int packetsize;
probefunc_t *probefunc;
} vendortype[] = {
/*
* WARNING: the order of probe is very important. Don't mess it
* unless you know what you are doing.
*/
{ MOUSE_MODEL_NET, /* Genius NetMouse */
0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_gmouse },
{ MOUSE_MODEL_NETSCROLL, /* Genius NetScroll */
0xc8, 6, enable_groller },
{ MOUSE_MODEL_MOUSEMANPLUS, /* Logitech MouseMan+ */
0x08, MOUSE_PS2_PACKETSIZE, enable_mmanplus },
{ MOUSE_MODEL_EXPLORER, /* Microsoft IntelliMouse Explorer */
0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msexplorer },
{ MOUSE_MODEL_4D, /* A4 Tech 4D Mouse */
0x08, MOUSE_4D_PACKETSIZE, enable_4dmouse },
{ MOUSE_MODEL_4DPLUS, /* A4 Tech 4D+ Mouse */
0xc8, MOUSE_4DPLUS_PACKETSIZE, enable_4dplus },
{ MOUSE_MODEL_SYNAPTICS, /* Synaptics Touchpad */
0xc0, MOUSE_SYNAPTICS_PACKETSIZE, enable_synaptics },
{ MOUSE_MODEL_ELANTECH, /* Elantech Touchpad */
0x04, MOUSE_ELANTECH_PACKETSIZE, enable_elantech },
{ MOUSE_MODEL_INTELLI, /* Microsoft IntelliMouse */
0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msintelli },
{ MOUSE_MODEL_GLIDEPOINT, /* ALPS GlidePoint */
0xc0, MOUSE_PS2_PACKETSIZE, enable_aglide },
{ MOUSE_MODEL_THINK, /* Kensington ThinkingMouse */
0x80, MOUSE_PS2_PACKETSIZE, enable_kmouse },
{ MOUSE_MODEL_VERSAPAD, /* Interlink electronics VersaPad */
0xe8, MOUSE_PS2VERSA_PACKETSIZE, enable_versapad },
{ MOUSE_MODEL_TRACKPOINT, /* IBM/Lenovo TrackPoint */
0xc0, MOUSE_PS2_PACKETSIZE, enable_trackpoint },
{ MOUSE_MODEL_GENERIC,
0xc0, MOUSE_PS2_PACKETSIZE, NULL },
};
#define GENERIC_MOUSE_ENTRY (nitems(vendortype) - 1)
/* device driver declarateion */
static device_method_t psm_methods[] = {
/* Device interface */
DEVMETHOD(device_identify, psmidentify),
DEVMETHOD(device_probe, psmprobe),
DEVMETHOD(device_attach, psmattach),
DEVMETHOD(device_detach, psmdetach),
DEVMETHOD(device_resume, psmresume),
{ 0, 0 }
};
static driver_t psm_driver = {
PSM_DRIVER_NAME,
psm_methods,
sizeof(struct psm_softc),
};
static struct cdevsw psm_cdevsw = {
.d_version = D_VERSION,
.d_flags = D_NEEDGIANT,
.d_open = psmopen,
.d_close = psmclose,
.d_read = psmread,
.d_write = psmwrite,
.d_ioctl = psmioctl,
.d_poll = psmpoll,
.d_name = PSM_DRIVER_NAME,
};
/* device I/O routines */
static int
enable_aux_dev(KBDC kbdc)
{
int res;
res = send_aux_command(kbdc, PSMC_ENABLE_DEV);
VLOG(2, (LOG_DEBUG, "psm: ENABLE_DEV return code:%04x\n", res));
return (res == PSM_ACK);
}
static int
disable_aux_dev(KBDC kbdc)
{
int res;
res = send_aux_command(kbdc, PSMC_DISABLE_DEV);
VLOG(2, (LOG_DEBUG, "psm: DISABLE_DEV return code:%04x\n", res));
return (res == PSM_ACK);
}
static int
get_mouse_status(KBDC kbdc, int *status, int flag, int len)
{
int cmd;
int res;
int i;
switch (flag) {
case 0:
default:
cmd = PSMC_SEND_DEV_STATUS;
break;
case 1:
cmd = PSMC_SEND_DEV_DATA;
break;
}
empty_aux_buffer(kbdc, 5);
res = send_aux_command(kbdc, cmd);
VLOG(2, (LOG_DEBUG, "psm: SEND_AUX_DEV_%s return code:%04x\n",
(flag == 1) ? "DATA" : "STATUS", res));
if (res != PSM_ACK)
return (0);
for (i = 0; i < len; ++i) {
status[i] = read_aux_data(kbdc);
if (status[i] < 0)
break;
}
VLOG(1, (LOG_DEBUG, "psm: %s %02x %02x %02x\n",
(flag == 1) ? "data" : "status", status[0], status[1], status[2]));
return (i);
}
static int
get_aux_id(KBDC kbdc)
{
int res;
int id;
empty_aux_buffer(kbdc, 5);
res = send_aux_command(kbdc, PSMC_SEND_DEV_ID);
VLOG(2, (LOG_DEBUG, "psm: SEND_DEV_ID return code:%04x\n", res));
if (res != PSM_ACK)
return (-1);
/* 10ms delay */
DELAY(10000);
id = read_aux_data(kbdc);
VLOG(2, (LOG_DEBUG, "psm: device ID: %04x\n", id));
return (id);
}
static int
set_mouse_sampling_rate(KBDC kbdc, int rate)
{
int res;
res = send_aux_command_and_data(kbdc, PSMC_SET_SAMPLING_RATE, rate);
VLOG(2, (LOG_DEBUG, "psm: SET_SAMPLING_RATE (%d) %04x\n", rate, res));
return ((res == PSM_ACK) ? rate : -1);
}
static int
set_mouse_scaling(KBDC kbdc, int scale)
{
int res;
switch (scale) {
case 1:
default:
scale = PSMC_SET_SCALING11;
break;
case 2:
scale = PSMC_SET_SCALING21;
break;
}
res = send_aux_command(kbdc, scale);
VLOG(2, (LOG_DEBUG, "psm: SET_SCALING%s return code:%04x\n",
(scale == PSMC_SET_SCALING21) ? "21" : "11", res));
return (res == PSM_ACK);
}
/* `val' must be 0 through PSMD_MAX_RESOLUTION */
static int
set_mouse_resolution(KBDC kbdc, int val)
{
int res;
res = send_aux_command_and_data(kbdc, PSMC_SET_RESOLUTION, val);
VLOG(2, (LOG_DEBUG, "psm: SET_RESOLUTION (%d) %04x\n", val, res));
return ((res == PSM_ACK) ? val : -1);
}
/*
* NOTE: once `set_mouse_mode()' is called, the mouse device must be
* re-enabled by calling `enable_aux_dev()'
*/
static int
set_mouse_mode(KBDC kbdc)
{
int res;
res = send_aux_command(kbdc, PSMC_SET_STREAM_MODE);
VLOG(2, (LOG_DEBUG, "psm: SET_STREAM_MODE return code:%04x\n", res));
return (res == PSM_ACK);
}
static int
get_mouse_buttons(KBDC kbdc)
{
int c = 2; /* assume two buttons by default */
int status[3];
/*
* NOTE: a special sequence to obtain Logitech Mouse specific
* information: set resolution to 25 ppi, set scaling to 1:1, set
* scaling to 1:1, set scaling to 1:1. Then the second byte of the
* mouse status bytes is the number of available buttons.
* Some manufactures also support this sequence.
*/
if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
return (c);
if (set_mouse_scaling(kbdc, 1) && set_mouse_scaling(kbdc, 1) &&
set_mouse_scaling(kbdc, 1) &&
get_mouse_status(kbdc, status, 0, 3) >= 3 && status[1] != 0)
return (status[1]);
return (c);
}
/* misc subroutines */
/*
* Someday, I will get the complete list of valid pointing devices and
* their IDs... XXX
*/
static int
is_a_mouse(int id)
{
#if 0
static int valid_ids[] = {
PSM_MOUSE_ID, /* mouse */
PSM_BALLPOINT_ID, /* ballpoint device */
PSM_INTELLI_ID, /* Intellimouse */
PSM_EXPLORER_ID, /* Intellimouse Explorer */
-1 /* end of table */
};
int i;
for (i = 0; valid_ids[i] >= 0; ++i)
if (valid_ids[i] == id)
return (TRUE);
return (FALSE);
#else
return (TRUE);
#endif
}
static char *
model_name(int model)
{
static struct {
int model_code;
char *model_name;
} models[] = {
{ MOUSE_MODEL_NETSCROLL, "NetScroll" },
{ MOUSE_MODEL_NET, "NetMouse/NetScroll Optical" },
{ MOUSE_MODEL_GLIDEPOINT, "GlidePoint" },
{ MOUSE_MODEL_THINK, "ThinkingMouse" },
{ MOUSE_MODEL_INTELLI, "IntelliMouse" },
{ MOUSE_MODEL_MOUSEMANPLUS, "MouseMan+" },
{ MOUSE_MODEL_VERSAPAD, "VersaPad" },
{ MOUSE_MODEL_EXPLORER, "IntelliMouse Explorer" },
{ MOUSE_MODEL_4D, "4D Mouse" },
{ MOUSE_MODEL_4DPLUS, "4D+ Mouse" },
{ MOUSE_MODEL_SYNAPTICS, "Synaptics Touchpad" },
{ MOUSE_MODEL_TRACKPOINT, "IBM/Lenovo TrackPoint" },
{ MOUSE_MODEL_ELANTECH, "Elantech Touchpad" },
{ MOUSE_MODEL_GENERIC, "Generic PS/2 mouse" },
{ MOUSE_MODEL_UNKNOWN, "Unknown" },
};
int i;
for (i = 0; models[i].model_code != MOUSE_MODEL_UNKNOWN; ++i)
if (models[i].model_code == model)
break;
return (models[i].model_name);
}
static void
recover_from_error(KBDC kbdc)
{
/* discard anything left in the output buffer */
empty_both_buffers(kbdc, 10);
#if 0
/*
* NOTE: KBDC_RESET_KBD may not restore the communication between the
* keyboard and the controller.
*/
reset_kbd(kbdc);
#else
/*
* NOTE: somehow diagnostic and keyboard port test commands bring the
* keyboard back.
*/
if (!test_controller(kbdc))
log(LOG_ERR, "psm: keyboard controller failed.\n");
/* if there isn't a keyboard in the system, the following error is OK */
if (test_kbd_port(kbdc) != 0)
VLOG(1, (LOG_ERR, "psm: keyboard port failed.\n"));
#endif
}
static int
restore_controller(KBDC kbdc, int command_byte)
{
empty_both_buffers(kbdc, 10);
if (!set_controller_command_byte(kbdc, 0xff, command_byte)) {
log(LOG_ERR, "psm: failed to restore the keyboard controller "
"command byte.\n");
empty_both_buffers(kbdc, 10);
return (FALSE);
} else {
empty_both_buffers(kbdc, 10);
return (TRUE);
}
}
/*
* Re-initialize the aux port and device. The aux port must be enabled
* and its interrupt must be disabled before calling this routine.
* The aux device will be disabled before returning.
* The keyboard controller must be locked via `kbdc_lock()' before
* calling this routine.
*/
static int
doinitialize(struct psm_softc *sc, mousemode_t *mode)
{
KBDC kbdc = sc->kbdc;
int stat[3];
int i;
switch((i = test_aux_port(kbdc))) {
case 1: /* ignore these errors */
case 2:
case 3:
case PSM_ACK:
if (verbose)
log(LOG_DEBUG,
"psm%d: strange result for test aux port (%d).\n",
sc->unit, i);
/* FALLTHROUGH */
case 0: /* no error */
break;
case -1: /* time out */
default: /* error */
recover_from_error(kbdc);
if (sc->config & PSM_CONFIG_IGNPORTERROR)
break;
log(LOG_ERR, "psm%d: the aux port is not functioning (%d).\n",
sc->unit, i);
return (FALSE);
}
if (sc->config & PSM_CONFIG_NORESET) {
/*
* Don't try to reset the pointing device. It may possibly
* be left in the unknown state, though...
*/
} else {
/*
* NOTE: some controllers appears to hang the `keyboard' when
* the aux port doesn't exist and `PSMC_RESET_DEV' is issued.
*/
if (!reset_aux_dev(kbdc)) {
recover_from_error(kbdc);
log(LOG_ERR, "psm%d: failed to reset the aux device.\n",
sc->unit);
return (FALSE);
}
}
/*
* both the aux port and the aux device is functioning, see
* if the device can be enabled.
*/
if (!enable_aux_dev(kbdc) || !disable_aux_dev(kbdc)) {
log(LOG_ERR, "psm%d: failed to enable the aux device.\n",
sc->unit);
return (FALSE);
}
empty_both_buffers(kbdc, 10); /* remove stray data if any */
/* Re-enable the mouse. */
for (i = 0; vendortype[i].probefunc != NULL; ++i)
if (vendortype[i].model == sc->hw.model)
(*vendortype[i].probefunc)(sc, REINIT);
/* set mouse parameters */
if (mode != (mousemode_t *)NULL) {
if (mode->rate > 0)
mode->rate = set_mouse_sampling_rate(kbdc, mode->rate);
if (mode->resolution >= 0)
mode->resolution =
set_mouse_resolution(kbdc, mode->resolution);
set_mouse_scaling(kbdc, 1);
set_mouse_mode(kbdc);
}
/* Record sync on the next data packet we see. */
sc->flags |= PSM_NEED_SYNCBITS;
/* just check the status of the mouse */
if (get_mouse_status(kbdc, stat, 0, 3) < 3)
log(LOG_DEBUG, "psm%d: failed to get status (doinitialize).\n",
sc->unit);
return (TRUE);
}
static int
doopen(struct psm_softc *sc, int command_byte)
{
int stat[3];
/*
* FIXME: Synaptics TouchPad seems to go back to Relative Mode with
* no obvious reason. Thus we check the current mode and restore the
* Absolute Mode if it was cleared.
*
* The previous hack at the end of psmprobe() wasn't efficient when
* moused(8) was restarted.
*
* A Reset (FF) or Set Defaults (F6) command would clear the
* Absolute Mode bit. But a verbose boot or debug.psm.loglevel=5
* doesn't show any evidence of such a command.
*/
if (sc->hw.model == MOUSE_MODEL_SYNAPTICS) {
mouse_ext_command(sc->kbdc, 1);
get_mouse_status(sc->kbdc, stat, 0, 3);
if ((SYNAPTICS_VERSION_GE(sc->synhw, 7, 5) ||
stat[1] == 0x47) &&
stat[2] == 0x40) {
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
VLOG(5, (LOG_DEBUG, "psm%d: Synaptis Absolute Mode "
"hopefully restored\n",
sc->unit));
}
}
/*
* A user may want to disable tap and drag gestures on a Synaptics
* TouchPad when it operates in Relative Mode.
*/
if (sc->hw.model == MOUSE_MODEL_GENERIC) {
if (tap_enabled > 0) {
VLOG(2, (LOG_DEBUG,
"psm%d: enable tap and drag gestures\n",
sc->unit));
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
} else if (tap_enabled == 0) {
VLOG(2, (LOG_DEBUG,
"psm%d: disable tap and drag gestures\n",
sc->unit));
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
}
}
/* enable the mouse device */
if (!enable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR: failed to enable the mouse because:
* 1) the mouse is faulty,
* 2) the mouse has been removed(!?)
* In the latter case, the keyboard may have hung, and need
* recovery procedure...
*/
recover_from_error(sc->kbdc);
#if 0
/* FIXME: we could reset the mouse here and try to enable
* it again. But it will take long time and it's not a good
* idea to disable the keyboard that long...
*/
if (!doinitialize(sc, &sc->mode) || !enable_aux_dev(sc->kbdc)) {
recover_from_error(sc->kbdc);
#else
{
#endif
restore_controller(sc->kbdc, command_byte);
/* mark this device is no longer available */
sc->state &= ~PSM_VALID;
log(LOG_ERR,
"psm%d: failed to enable the device (doopen).\n",
sc->unit);
return (EIO);
}
}
if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
log(LOG_DEBUG, "psm%d: failed to get status (doopen).\n",
sc->unit);
/* enable the aux port and interrupt */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
(command_byte & KBD_KBD_CONTROL_BITS) |
KBD_ENABLE_AUX_PORT | KBD_ENABLE_AUX_INT)) {
/* CONTROLLER ERROR */
disable_aux_dev(sc->kbdc);
restore_controller(sc->kbdc, command_byte);
log(LOG_ERR,
"psm%d: failed to enable the aux interrupt (doopen).\n",
sc->unit);
return (EIO);
}
/* start the watchdog timer */
sc->watchdog = FALSE;
callout_reset(&sc->callout, hz * 2, psmtimeout, sc);
return (0);
}
static int
reinitialize(struct psm_softc *sc, int doinit)
{
int err;
int c;
int s;
/* don't let anybody mess with the aux device */
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
s = spltty();
/* block our watchdog timer */
sc->watchdog = FALSE;
callout_stop(&sc->callout);
/* save the current controller command byte */
empty_both_buffers(sc->kbdc, 10);
c = get_controller_command_byte(sc->kbdc);
VLOG(2, (LOG_DEBUG,
"psm%d: current command byte: %04x (reinitialize).\n",
sc->unit, c));
/* enable the aux port but disable the aux interrupt and the keyboard */
if ((c == -1) || !set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR */
splx(s);
kbdc_lock(sc->kbdc, FALSE);
log(LOG_ERR,
"psm%d: unable to set the command byte (reinitialize).\n",
sc->unit);
return (EIO);
}
/* flush any data */
if (sc->state & PSM_VALID) {
/* this may fail; but never mind... */
disable_aux_dev(sc->kbdc);
empty_aux_buffer(sc->kbdc, 10);
}
flushpackets(sc);
sc->syncerrors = 0;
sc->pkterrors = 0;
memset(&sc->lastinputerr, 0, sizeof(sc->lastinputerr));
/* try to detect the aux device; are you still there? */
err = 0;
if (doinit) {
if (doinitialize(sc, &sc->mode)) {
/* yes */
sc->state |= PSM_VALID;
} else {
/* the device has gone! */
restore_controller(sc->kbdc, c);
sc->state &= ~PSM_VALID;
log(LOG_ERR,
"psm%d: the aux device has gone! (reinitialize).\n",
sc->unit);
err = ENXIO;
}
}
splx(s);
/* restore the driver state */
if ((sc->state & PSM_OPEN) && (err == 0)) {
/* enable the aux device and the port again */
err = doopen(sc, c);
if (err != 0)
log(LOG_ERR, "psm%d: failed to enable the device "
"(reinitialize).\n", sc->unit);
} else {
/* restore the keyboard port and disable the aux port */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
(c & KBD_KBD_CONTROL_BITS) |
KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR */
log(LOG_ERR, "psm%d: failed to disable the aux port "
"(reinitialize).\n", sc->unit);
err = EIO;
}
}
kbdc_lock(sc->kbdc, FALSE);
return (err);
}
/* psm driver entry points */
static void
psmidentify(driver_t *driver, device_t parent)
{
device_t psmc;
device_t psm;
u_long irq;
int unit;
unit = device_get_unit(parent);
/* always add at least one child */
psm = BUS_ADD_CHILD(parent, KBDC_RID_AUX, driver->name, unit);
if (psm == NULL)
return;
irq = bus_get_resource_start(psm, SYS_RES_IRQ, KBDC_RID_AUX);
if (irq > 0)
return;
/*
* If the PS/2 mouse device has already been reported by ACPI or
* PnP BIOS, obtain the IRQ resource from it.
* (See psmcpnp_attach() below.)
*/
psmc = device_find_child(device_get_parent(parent),
PSMCPNP_DRIVER_NAME, unit);
if (psmc == NULL)
return;
irq = bus_get_resource_start(psmc, SYS_RES_IRQ, 0);
if (irq <= 0)
return;
bus_delete_resource(psmc, SYS_RES_IRQ, 0);
bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1);
}
#define endprobe(v) do { \
if (bootverbose) \
--verbose; \
kbdc_set_device_mask(sc->kbdc, mask); \
kbdc_lock(sc->kbdc, FALSE); \
return (v); \
} while (0)
static int
psmprobe(device_t dev)
{
int unit = device_get_unit(dev);
struct psm_softc *sc = device_get_softc(dev);
int stat[3];
int command_byte;
int mask;
int rid;
int i;
#if 0
kbdc_debug(TRUE);
#endif
/* see if IRQ is available */
rid = KBDC_RID_AUX;
sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
if (sc->intr == NULL) {
if (bootverbose)
device_printf(dev, "unable to allocate IRQ\n");
return (ENXIO);
}
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
sc->unit = unit;
sc->kbdc = atkbdc_open(device_get_unit(device_get_parent(dev)));
sc->config = device_get_flags(dev) & PSM_CONFIG_FLAGS;
/* XXX: for backward compatibility */
#if defined(PSM_HOOKRESUME) || defined(PSM_HOOKAPM)
sc->config |=
#ifdef PSM_RESETAFTERSUSPEND
PSM_CONFIG_INITAFTERSUSPEND;
#else
PSM_CONFIG_HOOKRESUME;
#endif
#endif /* PSM_HOOKRESUME | PSM_HOOKAPM */
sc->flags = 0;
if (bootverbose)
++verbose;
device_set_desc(dev, "PS/2 Mouse");
if (!kbdc_lock(sc->kbdc, TRUE)) {
printf("psm%d: unable to lock the controller.\n", unit);
if (bootverbose)
--verbose;
return (ENXIO);
}
/*
* NOTE: two bits in the command byte controls the operation of the
* aux port (mouse port): the aux port disable bit (bit 5) and the aux
* port interrupt (IRQ 12) enable bit (bit 2).
*/
/* discard anything left after the keyboard initialization */
empty_both_buffers(sc->kbdc, 10);
/* save the current command byte; it will be used later */
mask = kbdc_get_device_mask(sc->kbdc) & ~KBD_AUX_CONTROL_BITS;
command_byte = get_controller_command_byte(sc->kbdc);
if (verbose)
printf("psm%d: current command byte:%04x\n", unit,
command_byte);
if (command_byte == -1) {
/* CONTROLLER ERROR */
printf("psm%d: unable to get the current command byte value.\n",
unit);
endprobe(ENXIO);
}
/*
* disable the keyboard port while probing the aux port, which must be
* enabled during this routine
*/
if (!set_controller_command_byte(sc->kbdc,
KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/*
* this is CONTROLLER ERROR; I don't know how to recover
* from this error...
*/
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
printf("psm%d: unable to set the command byte.\n", unit);
endprobe(ENXIO);
}
write_controller_command(sc->kbdc, KBDC_ENABLE_AUX_PORT);
/*
* NOTE: `test_aux_port()' is designed to return with zero if the aux
* port exists and is functioning. However, some controllers appears
* to respond with zero even when the aux port doesn't exist. (It may
* be that this is only the case when the controller DOES have the aux
* port but the port is not wired on the motherboard.) The keyboard
* controllers without the port, such as the original AT, are
* supposed to return with an error code or simply time out. In any
* case, we have to continue probing the port even when the controller
* passes this test.
*
* XXX: some controllers erroneously return the error code 1, 2 or 3
* when it has a perfectly functional aux port. We have to ignore
* this error code. Even if the controller HAS error with the aux
* port, it will be detected later...
* XXX: another incompatible controller returns PSM_ACK (0xfa)...
*/
switch ((i = test_aux_port(sc->kbdc))) {
case 1: /* ignore these errors */
case 2:
case 3:
case PSM_ACK:
if (verbose)
printf("psm%d: strange result for test aux port "
"(%d).\n", unit, i);
/* FALLTHROUGH */
case 0: /* no error */
break;
case -1: /* time out */
default: /* error */
recover_from_error(sc->kbdc);
if (sc->config & PSM_CONFIG_IGNPORTERROR)
break;
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
if (verbose)
printf("psm%d: the aux port is not functioning (%d).\n",
unit, i);
endprobe(ENXIO);
}
if (sc->config & PSM_CONFIG_NORESET) {
/*
* Don't try to reset the pointing device. It may possibly be
* left in an unknown state, though...
*/
} else {
/*
* NOTE: some controllers appears to hang the `keyboard' when
* the aux port doesn't exist and `PSMC_RESET_DEV' is issued.
*
* Attempt to reset the controller twice -- this helps
* pierce through some KVM switches. The second reset
* is non-fatal.
*/
if (!reset_aux_dev(sc->kbdc)) {
recover_from_error(sc->kbdc);
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
if (verbose)
printf("psm%d: failed to reset the aux "
"device.\n", unit);
endprobe(ENXIO);
} else if (!reset_aux_dev(sc->kbdc)) {
recover_from_error(sc->kbdc);
if (verbose >= 2)
printf("psm%d: failed to reset the aux device "
"(2).\n", unit);
}
}
/*
* both the aux port and the aux device are functioning, see if the
* device can be enabled. NOTE: when enabled, the device will start
* sending data; we shall immediately disable the device once we know
* the device can be enabled.
*/
if (!enable_aux_dev(sc->kbdc) || !disable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR */
recover_from_error(sc->kbdc);
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
if (verbose)
printf("psm%d: failed to enable the aux device.\n",
unit);
endprobe(ENXIO);
}
/* save the default values after reset */
if (get_mouse_status(sc->kbdc, stat, 0, 3) >= 3) {
sc->dflt_mode.rate = sc->mode.rate = stat[2];
sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
} else {
sc->dflt_mode.rate = sc->mode.rate = -1;
sc->dflt_mode.resolution = sc->mode.resolution = -1;
}
/* hardware information */
sc->hw.iftype = MOUSE_IF_PS2;
/* verify the device is a mouse */
sc->hw.hwid = get_aux_id(sc->kbdc);
if (!is_a_mouse(sc->hw.hwid)) {
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
if (verbose)
printf("psm%d: unknown device type (%d).\n", unit,
sc->hw.hwid);
endprobe(ENXIO);
}
switch (sc->hw.hwid) {
case PSM_BALLPOINT_ID:
sc->hw.type = MOUSE_TRACKBALL;
break;
case PSM_MOUSE_ID:
case PSM_INTELLI_ID:
case PSM_EXPLORER_ID:
case PSM_4DMOUSE_ID:
case PSM_4DPLUS_ID:
sc->hw.type = MOUSE_MOUSE;
break;
default:
sc->hw.type = MOUSE_UNKNOWN;
break;
}
if (sc->config & PSM_CONFIG_NOIDPROBE) {
sc->hw.buttons = 2;
i = GENERIC_MOUSE_ENTRY;
} else {
/* # of buttons */
sc->hw.buttons = get_mouse_buttons(sc->kbdc);
/* other parameters */
for (i = 0; vendortype[i].probefunc != NULL; ++i)
if ((*vendortype[i].probefunc)(sc, PROBE)) {
if (verbose >= 2)
printf("psm%d: found %s\n", unit,
model_name(vendortype[i].model));
break;
}
}
sc->hw.model = vendortype[i].model;
sc->dflt_mode.level = PSM_LEVEL_BASE;
sc->dflt_mode.packetsize = MOUSE_PS2_PACKETSIZE;
sc->dflt_mode.accelfactor = (sc->config & PSM_CONFIG_ACCEL) >> 4;
if (sc->config & PSM_CONFIG_NOCHECKSYNC)
sc->dflt_mode.syncmask[0] = 0;
else
sc->dflt_mode.syncmask[0] = vendortype[i].syncmask;
if (sc->config & PSM_CONFIG_FORCETAP)
sc->dflt_mode.syncmask[0] &= ~MOUSE_PS2_TAP;
sc->dflt_mode.syncmask[1] = 0; /* syncbits */
sc->mode = sc->dflt_mode;
sc->mode.packetsize = vendortype[i].packetsize;
/* set mouse parameters */
#if 0
/*
* A version of Logitech FirstMouse+ won't report wheel movement,
* if SET_DEFAULTS is sent... Don't use this command.
* This fix was found by Takashi Nishida.
*/
i = send_aux_command(sc->kbdc, PSMC_SET_DEFAULTS);
if (verbose >= 2)
printf("psm%d: SET_DEFAULTS return code:%04x\n", unit, i);
#endif
if (sc->config & PSM_CONFIG_RESOLUTION)
sc->mode.resolution =
set_mouse_resolution(sc->kbdc,
(sc->config & PSM_CONFIG_RESOLUTION) - 1);
else if (sc->mode.resolution >= 0)
sc->mode.resolution =
set_mouse_resolution(sc->kbdc, sc->dflt_mode.resolution);
if (sc->mode.rate > 0)
sc->mode.rate =
set_mouse_sampling_rate(sc->kbdc, sc->dflt_mode.rate);
set_mouse_scaling(sc->kbdc, 1);
/* Record sync on the next data packet we see. */
sc->flags |= PSM_NEED_SYNCBITS;
/* just check the status of the mouse */
/*
* NOTE: XXX there are some arcane controller/mouse combinations out
* there, which hung the controller unless there is data transmission
* after ACK from the mouse.
*/
if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
printf("psm%d: failed to get status.\n", unit);
else {
/*
* When in its native mode, some mice operate with different
* default parameters than in the PS/2 compatible mode.
*/
sc->dflt_mode.rate = sc->mode.rate = stat[2];
sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
}
/* disable the aux port for now... */
if (!set_controller_command_byte(sc->kbdc,
KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
(command_byte & KBD_KBD_CONTROL_BITS) |
KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/*
* this is CONTROLLER ERROR; I don't know the proper way to
* recover from this error...
*/
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
printf("psm%d: unable to set the command byte.\n", unit);
endprobe(ENXIO);
}
/* done */
kbdc_set_device_mask(sc->kbdc, mask | KBD_AUX_CONTROL_BITS);
kbdc_lock(sc->kbdc, FALSE);
return (0);
}
static int
psmattach(device_t dev)
{
int unit = device_get_unit(dev);
struct psm_softc *sc = device_get_softc(dev);
int error;
int rid;
/* Setup initial state */
sc->state = PSM_VALID;
callout_init(&sc->callout, 0);
callout_init(&sc->softcallout, 0);
/* Setup our interrupt handler */
rid = KBDC_RID_AUX;
sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
if (sc->intr == NULL)
return (ENXIO);
error = bus_setup_intr(dev, sc->intr, INTR_TYPE_TTY, NULL, psmintr, sc,
&sc->ih);
if (error) {
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
return (error);
}
/* Done */
sc->dev = make_dev(&psm_cdevsw, 0, 0, 0, 0666, "psm%d", unit);
sc->dev->si_drv1 = sc;
sc->bdev = make_dev(&psm_cdevsw, 0, 0, 0, 0666, "bpsm%d", unit);
sc->bdev->si_drv1 = sc;
/* Some touchpad devices need full reinitialization after suspend. */
switch (sc->hw.model) {
case MOUSE_MODEL_SYNAPTICS:
case MOUSE_MODEL_GLIDEPOINT:
case MOUSE_MODEL_VERSAPAD:
case MOUSE_MODEL_ELANTECH:
sc->config |= PSM_CONFIG_INITAFTERSUSPEND;
break;
default:
if (sc->synhw.infoMajor >= 4 || sc->tphw > 0)
sc->config |= PSM_CONFIG_INITAFTERSUSPEND;
break;
}
/* Elantech trackpad`s sync bit differs from touchpad`s one */
if (sc->hw.model == MOUSE_MODEL_ELANTECH &&
(sc->elanhw.hascrc || sc->elanhw.hastrackpoint))
sc->config |= PSM_CONFIG_NOCHECKSYNC;
if (!verbose)
printf("psm%d: model %s, device ID %d\n",
unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff);
else {
printf("psm%d: model %s, device ID %d-%02x, %d buttons\n",
unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff,
sc->hw.hwid >> 8, sc->hw.buttons);
printf("psm%d: config:%08x, flags:%08x, packet size:%d\n",
unit, sc->config, sc->flags, sc->mode.packetsize);
printf("psm%d: syncmask:%02x, syncbits:%02x\n",
unit, sc->mode.syncmask[0], sc->mode.syncmask[1]);
}
if (bootverbose)
--verbose;
return (0);
}
static int
psmdetach(device_t dev)
{
struct psm_softc *sc;
int rid;
sc = device_get_softc(dev);
if (sc->state & PSM_OPEN)
return (EBUSY);
rid = KBDC_RID_AUX;
bus_teardown_intr(dev, sc->intr, sc->ih);
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
destroy_dev(sc->dev);
destroy_dev(sc->bdev);
callout_drain(&sc->callout);
callout_drain(&sc->softcallout);
return (0);
}
static int
psmopen(struct cdev *dev, int flag, int fmt, struct thread *td)
{
struct psm_softc *sc;
int command_byte;
int err;
int s;
/* Get device data */
sc = dev->si_drv1;
if ((sc == NULL) || (sc->state & PSM_VALID) == 0) {
/* the device is no longer valid/functioning */
return (ENXIO);
}
/* Disallow multiple opens */
if (sc->state & PSM_OPEN)
return (EBUSY);
device_busy(devclass_get_device(psm_devclass, sc->unit));
/* Initialize state */
sc->mode.level = sc->dflt_mode.level;
sc->mode.protocol = sc->dflt_mode.protocol;
sc->watchdog = FALSE;
sc->async = NULL;
/* flush the event queue */
sc->queue.count = 0;
sc->queue.head = 0;
sc->queue.tail = 0;
sc->status.flags = 0;
sc->status.button = 0;
sc->status.obutton = 0;
sc->status.dx = 0;
sc->status.dy = 0;
sc->status.dz = 0;
sc->button = 0;
sc->pqueue_start = 0;
sc->pqueue_end = 0;
/* empty input buffer */
flushpackets(sc);
sc->syncerrors = 0;
sc->pkterrors = 0;
/* don't let timeout routines in the keyboard driver to poll the kbdc */
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
/* save the current controller command byte */
s = spltty();
command_byte = get_controller_command_byte(sc->kbdc);
/* enable the aux port and temporalily disable the keyboard */
if (command_byte == -1 || !set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR; do you know how to get out of this? */
kbdc_lock(sc->kbdc, FALSE);
splx(s);
log(LOG_ERR,
"psm%d: unable to set the command byte (psmopen).\n",
sc->unit);
return (EIO);
}
/*
* Now that the keyboard controller is told not to generate
* the keyboard and mouse interrupts, call `splx()' to allow
* the other tty interrupts. The clock interrupt may also occur,
* but timeout routines will be blocked by the poll flag set
* via `kbdc_lock()'
*/
splx(s);
/* enable the mouse device */
err = doopen(sc, command_byte);
/* done */
if (err == 0)
sc->state |= PSM_OPEN;
kbdc_lock(sc->kbdc, FALSE);
return (err);
}
static int
psmclose(struct cdev *dev, int flag, int fmt, struct thread *td)
{
struct psm_softc *sc = dev->si_drv1;
int stat[3];
int command_byte;
int s;
/* don't let timeout routines in the keyboard driver to poll the kbdc */
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
/* save the current controller command byte */
s = spltty();
command_byte = get_controller_command_byte(sc->kbdc);
if (command_byte == -1) {
kbdc_lock(sc->kbdc, FALSE);
splx(s);
return (EIO);
}
/* disable the aux interrupt and temporalily disable the keyboard */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
log(LOG_ERR,
"psm%d: failed to disable the aux int (psmclose).\n",
sc->unit);
/* CONTROLLER ERROR;
* NOTE: we shall force our way through. Because the only
* ill effect we shall see is that we may not be able
* to read ACK from the mouse, and it doesn't matter much
* so long as the mouse will accept the DISABLE command.
*/
}
splx(s);
/* stop the watchdog timer */
callout_stop(&sc->callout);
/* remove anything left in the output buffer */
empty_aux_buffer(sc->kbdc, 10);
/* disable the aux device, port and interrupt */
if (sc->state & PSM_VALID) {
if (!disable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR;
* NOTE: we don't return (error) and continue,
* pretending we have successfully disabled the device.
* It's OK because the interrupt routine will discard
* any data from the mouse hereafter.
*/
log(LOG_ERR,
"psm%d: failed to disable the device (psmclose).\n",
sc->unit);
}
if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
log(LOG_DEBUG,
"psm%d: failed to get status (psmclose).\n",
sc->unit);
}
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
(command_byte & KBD_KBD_CONTROL_BITS) |
KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/*
* CONTROLLER ERROR;
* we shall ignore this error; see the above comment.
*/
log(LOG_ERR,
"psm%d: failed to disable the aux port (psmclose).\n",
sc->unit);
}
/* remove anything left in the output buffer */
empty_aux_buffer(sc->kbdc, 10);
/* clean up and sigio requests */
if (sc->async != NULL) {
funsetown(&sc->async);
sc->async = NULL;
}
/* close is almost always successful */
sc->state &= ~PSM_OPEN;
kbdc_lock(sc->kbdc, FALSE);
device_unbusy(devclass_get_device(psm_devclass, sc->unit));
return (0);
}
static int
tame_mouse(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *status,
u_char *buf)
{
static u_char butmapps2[8] = {
0,
MOUSE_PS2_BUTTON1DOWN,
MOUSE_PS2_BUTTON2DOWN,
MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN,
MOUSE_PS2_BUTTON3DOWN,
MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON3DOWN,
MOUSE_PS2_BUTTON2DOWN | MOUSE_PS2_BUTTON3DOWN,
MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN |
MOUSE_PS2_BUTTON3DOWN,
};
static u_char butmapmsc[8] = {
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP |
MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP,
MOUSE_MSC_BUTTON2UP,
MOUSE_MSC_BUTTON1UP,
0,
};
int mapped;
int i;
if (sc->mode.level == PSM_LEVEL_BASE) {
mapped = status->button & ~MOUSE_BUTTON4DOWN;
if (status->button & MOUSE_BUTTON4DOWN)
mapped |= MOUSE_BUTTON1DOWN;
status->button = mapped;
buf[0] = MOUSE_PS2_SYNC | butmapps2[mapped & MOUSE_STDBUTTONS];
i = imax(imin(status->dx, 255), -256);
if (i < 0)
buf[0] |= MOUSE_PS2_XNEG;
buf[1] = i;
i = imax(imin(status->dy, 255), -256);
if (i < 0)
buf[0] |= MOUSE_PS2_YNEG;
buf[2] = i;
return (MOUSE_PS2_PACKETSIZE);
} else if (sc->mode.level == PSM_LEVEL_STANDARD) {
buf[0] = MOUSE_MSC_SYNC |
butmapmsc[status->button & MOUSE_STDBUTTONS];
i = imax(imin(status->dx, 255), -256);
buf[1] = i >> 1;
buf[3] = i - buf[1];
i = imax(imin(status->dy, 255), -256);
buf[2] = i >> 1;
buf[4] = i - buf[2];
i = imax(imin(status->dz, 127), -128);
buf[5] = (i >> 1) & 0x7f;
buf[6] = (i - (i >> 1)) & 0x7f;
buf[7] = (~status->button >> 3) & 0x7f;
return (MOUSE_SYS_PACKETSIZE);
}
return (pb->inputbytes);
}
static int
psmread(struct cdev *dev, struct uio *uio, int flag)
{
struct psm_softc *sc = dev->si_drv1;
u_char buf[PSM_SMALLBUFSIZE];
int error = 0;
int s;
int l;
if ((sc->state & PSM_VALID) == 0)
return (EIO);
/* block until mouse activity occurred */
s = spltty();
while (sc->queue.count <= 0) {
if (dev != sc->bdev) {
splx(s);
return (EWOULDBLOCK);
}
sc->state |= PSM_ASLP;
error = tsleep(sc, PZERO | PCATCH, "psmrea", 0);
sc->state &= ~PSM_ASLP;
if (error) {
splx(s);
return (error);
} else if ((sc->state & PSM_VALID) == 0) {
/* the device disappeared! */
splx(s);
return (EIO);
}
}
splx(s);
/* copy data to the user land */
while ((sc->queue.count > 0) && (uio->uio_resid > 0)) {
s = spltty();
l = imin(sc->queue.count, uio->uio_resid);
if (l > sizeof(buf))
l = sizeof(buf);
if (l > sizeof(sc->queue.buf) - sc->queue.head) {
bcopy(&sc->queue.buf[sc->queue.head], &buf[0],
sizeof(sc->queue.buf) - sc->queue.head);
bcopy(&sc->queue.buf[0],
&buf[sizeof(sc->queue.buf) - sc->queue.head],
l - (sizeof(sc->queue.buf) - sc->queue.head));
} else
bcopy(&sc->queue.buf[sc->queue.head], &buf[0], l);
sc->queue.count -= l;
sc->queue.head = (sc->queue.head + l) % sizeof(sc->queue.buf);
splx(s);
error = uiomove(buf, l, uio);
if (error)
break;
}
return (error);
}
static int
block_mouse_data(struct psm_softc *sc, int *c)
{
int s;
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
s = spltty();
*c = get_controller_command_byte(sc->kbdc);
if ((*c == -1) || !set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* this is CONTROLLER ERROR */
splx(s);
kbdc_lock(sc->kbdc, FALSE);
return (EIO);
}
/*
* The device may be in the middle of status data transmission.
* The transmission will be interrupted, thus, incomplete status
* data must be discarded. Although the aux interrupt is disabled
* at the keyboard controller level, at most one aux interrupt
* may have already been pending and a data byte is in the
* output buffer; throw it away. Note that the second argument
* to `empty_aux_buffer()' is zero, so that the call will just
* flush the internal queue.
* `psmintr()' will be invoked after `splx()' if an interrupt is
* pending; it will see no data and returns immediately.
*/
empty_aux_buffer(sc->kbdc, 0); /* flush the queue */
read_aux_data_no_wait(sc->kbdc); /* throw away data if any */
flushpackets(sc);
splx(s);
return (0);
}
static void
dropqueue(struct psm_softc *sc)
{
sc->queue.count = 0;
sc->queue.head = 0;
sc->queue.tail = 0;
if ((sc->state & PSM_SOFTARMED) != 0) {
sc->state &= ~PSM_SOFTARMED;
callout_stop(&sc->softcallout);
}
sc->pqueue_start = sc->pqueue_end;
}
static void
flushpackets(struct psm_softc *sc)
{
dropqueue(sc);
bzero(&sc->pqueue, sizeof(sc->pqueue));
}
static int
unblock_mouse_data(struct psm_softc *sc, int c)
{
int error = 0;
/*
* We may have seen a part of status data during `set_mouse_XXX()'.
* they have been queued; flush it.
*/
empty_aux_buffer(sc->kbdc, 0);
/* restore ports and interrupt */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
c & (KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS))) {
/*
* CONTROLLER ERROR; this is serious, we may have
* been left with the inaccessible keyboard and
* the disabled mouse interrupt.
*/
error = EIO;
}
kbdc_lock(sc->kbdc, FALSE);
return (error);
}
static int
psmwrite(struct cdev *dev, struct uio *uio, int flag)
{
struct psm_softc *sc = dev->si_drv1;
u_char buf[PSM_SMALLBUFSIZE];
int error = 0, i, l;
if ((sc->state & PSM_VALID) == 0)
return (EIO);
if (sc->mode.level < PSM_LEVEL_NATIVE)
return (ENODEV);
/* copy data from the user land */
while (uio->uio_resid > 0) {
l = imin(PSM_SMALLBUFSIZE, uio->uio_resid);
error = uiomove(buf, l, uio);
if (error)
break;
for (i = 0; i < l; i++) {
VLOG(4, (LOG_DEBUG, "psm: cmd 0x%x\n", buf[i]));
if (!write_aux_command(sc->kbdc, buf[i])) {
VLOG(2, (LOG_DEBUG,
"psm: cmd 0x%x failed.\n", buf[i]));
return (reinitialize(sc, FALSE));
}
}
}
return (error);
}
static int
psmioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag,
struct thread *td)
{
struct psm_softc *sc = dev->si_drv1;
mousemode_t mode;
mousestatus_t status;
#if (defined(MOUSE_GETVARS))
mousevar_t *var;
#endif
mousedata_t *data;
int stat[3];
int command_byte;
int error = 0;
int s;
/* Perform IOCTL command */
switch (cmd) {
case OLD_MOUSE_GETHWINFO:
s = spltty();
((old_mousehw_t *)addr)->buttons = sc->hw.buttons;
((old_mousehw_t *)addr)->iftype = sc->hw.iftype;
((old_mousehw_t *)addr)->type = sc->hw.type;
((old_mousehw_t *)addr)->hwid = sc->hw.hwid & 0x00ff;
splx(s);
break;
case MOUSE_GETHWINFO:
s = spltty();
*(mousehw_t *)addr = sc->hw;
if (sc->mode.level == PSM_LEVEL_BASE)
((mousehw_t *)addr)->model = MOUSE_MODEL_GENERIC;
splx(s);
break;
case MOUSE_SYN_GETHWINFO:
s = spltty();
if (sc->synhw.infoMajor >= 4)
*(synapticshw_t *)addr = sc->synhw;
else
error = EINVAL;
splx(s);
break;
case OLD_MOUSE_GETMODE:
s = spltty();
switch (sc->mode.level) {
case PSM_LEVEL_BASE:
((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
break;
case PSM_LEVEL_STANDARD:
((old_mousemode_t *)addr)->protocol =
MOUSE_PROTO_SYSMOUSE;
break;
case PSM_LEVEL_NATIVE:
((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
break;
}
((old_mousemode_t *)addr)->rate = sc->mode.rate;
((old_mousemode_t *)addr)->resolution = sc->mode.resolution;
((old_mousemode_t *)addr)->accelfactor = sc->mode.accelfactor;
splx(s);
break;
case MOUSE_GETMODE:
s = spltty();
*(mousemode_t *)addr = sc->mode;
if ((sc->flags & PSM_NEED_SYNCBITS) != 0) {
((mousemode_t *)addr)->syncmask[0] = 0;
((mousemode_t *)addr)->syncmask[1] = 0;
}
((mousemode_t *)addr)->resolution =
MOUSE_RES_LOW - sc->mode.resolution;
switch (sc->mode.level) {
case PSM_LEVEL_BASE:
((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
((mousemode_t *)addr)->packetsize =
MOUSE_PS2_PACKETSIZE;
break;
case PSM_LEVEL_STANDARD:
((mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE;
((mousemode_t *)addr)->packetsize =
MOUSE_SYS_PACKETSIZE;
((mousemode_t *)addr)->syncmask[0] = MOUSE_SYS_SYNCMASK;
((mousemode_t *)addr)->syncmask[1] = MOUSE_SYS_SYNC;
break;
case PSM_LEVEL_NATIVE:
/* FIXME: this isn't quite correct... XXX */
((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
break;
}
splx(s);
break;
case OLD_MOUSE_SETMODE:
case MOUSE_SETMODE:
if (cmd == OLD_MOUSE_SETMODE) {
mode.rate = ((old_mousemode_t *)addr)->rate;
/*
* resolution old I/F new I/F
* default 0 0
* low 1 -2
* medium low 2 -3
* medium high 3 -4
* high 4 -5
*/
if (((old_mousemode_t *)addr)->resolution > 0)
mode.resolution =
-((old_mousemode_t *)addr)->resolution - 1;
else
mode.resolution = 0;
mode.accelfactor =
((old_mousemode_t *)addr)->accelfactor;
mode.level = -1;
} else
mode = *(mousemode_t *)addr;
/* adjust and validate parameters. */
if (mode.rate > UCHAR_MAX)
return (EINVAL);
if (mode.rate == 0)
mode.rate = sc->dflt_mode.rate;
else if (mode.rate == -1)
/* don't change the current setting */
;
else if (mode.rate < 0)
return (EINVAL);
if (mode.resolution >= UCHAR_MAX)
return (EINVAL);
if (mode.resolution >= 200)
mode.resolution = MOUSE_RES_HIGH;
else if (mode.resolution >= 100)
mode.resolution = MOUSE_RES_MEDIUMHIGH;
else if (mode.resolution >= 50)
mode.resolution = MOUSE_RES_MEDIUMLOW;
else if (mode.resolution > 0)
mode.resolution = MOUSE_RES_LOW;
if (mode.resolution == MOUSE_RES_DEFAULT)
mode.resolution = sc->dflt_mode.resolution;
else if (mode.resolution == -1)
/* don't change the current setting */
;
else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
mode.resolution = MOUSE_RES_LOW - mode.resolution;
if (mode.level == -1)
/* don't change the current setting */
mode.level = sc->mode.level;
else if ((mode.level < PSM_LEVEL_MIN) ||
(mode.level > PSM_LEVEL_MAX))
return (EINVAL);
if (mode.accelfactor == -1)
/* don't change the current setting */
mode.accelfactor = sc->mode.accelfactor;
else if (mode.accelfactor < 0)
return (EINVAL);
/* don't allow anybody to poll the keyboard controller */
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
/* set mouse parameters */
if (mode.rate > 0)
mode.rate = set_mouse_sampling_rate(sc->kbdc,
mode.rate);
if (mode.resolution >= 0)
mode.resolution =
set_mouse_resolution(sc->kbdc, mode.resolution);
set_mouse_scaling(sc->kbdc, 1);
get_mouse_status(sc->kbdc, stat, 0, 3);
s = spltty();
sc->mode.rate = mode.rate;
sc->mode.resolution = mode.resolution;
sc->mode.accelfactor = mode.accelfactor;
sc->mode.level = mode.level;
splx(s);
unblock_mouse_data(sc, command_byte);
break;
case MOUSE_GETLEVEL:
*(int *)addr = sc->mode.level;
break;
case MOUSE_SETLEVEL:
if ((*(int *)addr < PSM_LEVEL_MIN) ||
(*(int *)addr > PSM_LEVEL_MAX))
return (EINVAL);
sc->mode.level = *(int *)addr;
break;
case MOUSE_GETSTATUS:
s = spltty();
status = sc->status;
sc->status.flags = 0;
sc->status.obutton = sc->status.button;
sc->status.button = 0;
sc->status.dx = 0;
sc->status.dy = 0;
sc->status.dz = 0;
splx(s);
*(mousestatus_t *)addr = status;
break;
#if (defined(MOUSE_GETVARS))
case MOUSE_GETVARS:
var = (mousevar_t *)addr;
bzero(var, sizeof(*var));
s = spltty();
var->var[0] = MOUSE_VARS_PS2_SIG;
var->var[1] = sc->config;
var->var[2] = sc->flags;
splx(s);
break;
case MOUSE_SETVARS:
return (ENODEV);
#endif /* MOUSE_GETVARS */
case MOUSE_READSTATE:
case MOUSE_READDATA:
data = (mousedata_t *)addr;
if (data->len > sizeof(data->buf)/sizeof(data->buf[0]))
return (EINVAL);
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
if ((data->len = get_mouse_status(sc->kbdc, data->buf,
(cmd == MOUSE_READDATA) ? 1 : 0, data->len)) <= 0)
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
#if (defined(MOUSE_SETRESOLUTION))
case MOUSE_SETRESOLUTION:
mode.resolution = *(int *)addr;
if (mode.resolution >= UCHAR_MAX)
return (EINVAL);
else if (mode.resolution >= 200)
mode.resolution = MOUSE_RES_HIGH;
else if (mode.resolution >= 100)
mode.resolution = MOUSE_RES_MEDIUMHIGH;
else if (mode.resolution >= 50)
mode.resolution = MOUSE_RES_MEDIUMLOW;
else if (mode.resolution > 0)
mode.resolution = MOUSE_RES_LOW;
if (mode.resolution == MOUSE_RES_DEFAULT)
mode.resolution = sc->dflt_mode.resolution;
else if (mode.resolution == -1)
mode.resolution = sc->mode.resolution;
else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
mode.resolution = MOUSE_RES_LOW - mode.resolution;
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
sc->mode.resolution =
set_mouse_resolution(sc->kbdc, mode.resolution);
if (sc->mode.resolution != mode.resolution)
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
#endif /* MOUSE_SETRESOLUTION */
#if (defined(MOUSE_SETRATE))
case MOUSE_SETRATE:
mode.rate = *(int *)addr;
if (mode.rate > UCHAR_MAX)
return (EINVAL);
if (mode.rate == 0)
mode.rate = sc->dflt_mode.rate;
else if (mode.rate < 0)
mode.rate = sc->mode.rate;
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
sc->mode.rate = set_mouse_sampling_rate(sc->kbdc, mode.rate);
if (sc->mode.rate != mode.rate)
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
#endif /* MOUSE_SETRATE */
#if (defined(MOUSE_SETSCALING))
case MOUSE_SETSCALING:
if ((*(int *)addr <= 0) || (*(int *)addr > 2))
return (EINVAL);
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
if (!set_mouse_scaling(sc->kbdc, *(int *)addr))
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
#endif /* MOUSE_SETSCALING */
#if (defined(MOUSE_GETHWID))
case MOUSE_GETHWID:
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
sc->hw.hwid &= ~0x00ff;
sc->hw.hwid |= get_aux_id(sc->kbdc);
*(int *)addr = sc->hw.hwid & 0x00ff;
unblock_mouse_data(sc, command_byte);
break;
#endif /* MOUSE_GETHWID */
case FIONBIO:
case FIOASYNC:
break;
case FIOSETOWN:
error = fsetown(*(int *)addr, &sc->async);
break;
case FIOGETOWN:
*(int *) addr = fgetown(&sc->async);
break;
default:
return (ENOTTY);
}
return (error);
}
static void
psmtimeout(void *arg)
{
struct psm_softc *sc;
int s;
sc = (struct psm_softc *)arg;
s = spltty();
if (sc->watchdog && kbdc_lock(sc->kbdc, TRUE)) {
VLOG(4, (LOG_DEBUG, "psm%d: lost interrupt?\n", sc->unit));
psmintr(sc);
kbdc_lock(sc->kbdc, FALSE);
}
sc->watchdog = TRUE;
splx(s);
callout_reset(&sc->callout, hz, psmtimeout, sc);
}
/* Add all sysctls under the debug.psm and hw.psm nodes */
static SYSCTL_NODE(_debug, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse");
static SYSCTL_NODE(_hw, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse");
SYSCTL_INT(_debug_psm, OID_AUTO, loglevel, CTLFLAG_RWTUN, &verbose, 0,
"Verbosity level");
static int psmhz = 20;
SYSCTL_INT(_debug_psm, OID_AUTO, hz, CTLFLAG_RW, &psmhz, 0,
"Frequency of the softcallout (in hz)");
static int psmerrsecs = 2;
SYSCTL_INT(_debug_psm, OID_AUTO, errsecs, CTLFLAG_RW, &psmerrsecs, 0,
"Number of seconds during which packets will dropped after a sync error");
static int psmerrusecs = 0;
SYSCTL_INT(_debug_psm, OID_AUTO, errusecs, CTLFLAG_RW, &psmerrusecs, 0,
"Microseconds to add to psmerrsecs");
static int psmsecs = 0;
SYSCTL_INT(_debug_psm, OID_AUTO, secs, CTLFLAG_RW, &psmsecs, 0,
"Max number of seconds between soft interrupts");
static int psmusecs = 500000;
SYSCTL_INT(_debug_psm, OID_AUTO, usecs, CTLFLAG_RW, &psmusecs, 0,
"Microseconds to add to psmsecs");
static int pkterrthresh = 2;
SYSCTL_INT(_debug_psm, OID_AUTO, pkterrthresh, CTLFLAG_RW, &pkterrthresh, 0,
"Number of error packets allowed before reinitializing the mouse");
SYSCTL_INT(_hw_psm, OID_AUTO, tap_enabled, CTLFLAG_RWTUN, &tap_enabled, 0,
"Enable tap and drag gestures");
static int tap_threshold = PSM_TAP_THRESHOLD;
SYSCTL_INT(_hw_psm, OID_AUTO, tap_threshold, CTLFLAG_RW, &tap_threshold, 0,
"Button tap threshold");
static int tap_timeout = PSM_TAP_TIMEOUT;
SYSCTL_INT(_hw_psm, OID_AUTO, tap_timeout, CTLFLAG_RW, &tap_timeout, 0,
"Tap timeout for touchpads");
/* Tunables */
SYSCTL_INT(_hw_psm, OID_AUTO, synaptics_support, CTLFLAG_RDTUN,
&synaptics_support, 0, "Enable support for Synaptics touchpads");
SYSCTL_INT(_hw_psm, OID_AUTO, trackpoint_support, CTLFLAG_RDTUN,
&trackpoint_support, 0, "Enable support for IBM/Lenovo TrackPoint");
SYSCTL_INT(_hw_psm, OID_AUTO, elantech_support, CTLFLAG_RDTUN,
&elantech_support, 0, "Enable support for Elantech touchpads");
static void
psmintr(void *arg)
{
struct psm_softc *sc = arg;
struct timeval now;
int c;
packetbuf_t *pb;
/* read until there is nothing to read */
while((c = read_aux_data_no_wait(sc->kbdc)) != -1) {
pb = &sc->pqueue[sc->pqueue_end];
/* discard the byte if the device is not open */
if ((sc->state & PSM_OPEN) == 0)
continue;
getmicrouptime(&now);
if ((pb->inputbytes > 0) &&
timevalcmp(&now, &sc->inputtimeout, >)) {
VLOG(3, (LOG_DEBUG, "psmintr: delay too long; "
"resetting byte count\n"));
pb->inputbytes = 0;
sc->syncerrors = 0;
sc->pkterrors = 0;
}
sc->inputtimeout.tv_sec = PSM_INPUT_TIMEOUT / 1000000;
sc->inputtimeout.tv_usec = PSM_INPUT_TIMEOUT % 1000000;
timevaladd(&sc->inputtimeout, &now);
pb->ipacket[pb->inputbytes++] = c;
if (sc->mode.level == PSM_LEVEL_NATIVE) {
VLOG(4, (LOG_DEBUG, "psmintr: %02x\n", pb->ipacket[0]));
sc->syncerrors = 0;
sc->pkterrors = 0;
goto next;
} else {
if (pb->inputbytes < sc->mode.packetsize)
continue;
VLOG(4, (LOG_DEBUG,
"psmintr: %02x %02x %02x %02x %02x %02x\n",
pb->ipacket[0], pb->ipacket[1], pb->ipacket[2],
pb->ipacket[3], pb->ipacket[4], pb->ipacket[5]));
}
c = pb->ipacket[0];
if ((sc->flags & PSM_NEED_SYNCBITS) != 0) {
sc->mode.syncmask[1] = (c & sc->mode.syncmask[0]);
sc->flags &= ~PSM_NEED_SYNCBITS;
VLOG(2, (LOG_DEBUG,
"psmintr: Sync bytes now %04x,%04x\n",
sc->mode.syncmask[0], sc->mode.syncmask[0]));
} else if ((c & sc->mode.syncmask[0]) != sc->mode.syncmask[1]) {
VLOG(3, (LOG_DEBUG, "psmintr: out of sync "
"(%04x != %04x) %d cmds since last error.\n",
c & sc->mode.syncmask[0], sc->mode.syncmask[1],
sc->cmdcount - sc->lasterr));
sc->lasterr = sc->cmdcount;
/*
* The sync byte test is a weak measure of packet
* validity. Conservatively discard any input yet
* to be seen by userland when we detect a sync
* error since there is a good chance some of
* the queued packets have undetected errors.
*/
dropqueue(sc);
if (sc->syncerrors == 0)
sc->pkterrors++;
++sc->syncerrors;
sc->lastinputerr = now;
if (sc->syncerrors >= sc->mode.packetsize * 2 ||
sc->pkterrors >= pkterrthresh) {
/*
* If we've failed to find a single sync byte
* in 2 packets worth of data, or we've seen
* persistent packet errors during the
* validation period, reinitialize the mouse
* in hopes of returning it to the expected
* mode.
*/
VLOG(3, (LOG_DEBUG,
"psmintr: reset the mouse.\n"));
reinitialize(sc, TRUE);
} else if (sc->syncerrors == sc->mode.packetsize) {
/*
* Try a soft reset after searching for a sync
* byte through a packet length of bytes.
*/
VLOG(3, (LOG_DEBUG,
"psmintr: re-enable the mouse.\n"));
pb->inputbytes = 0;
disable_aux_dev(sc->kbdc);
enable_aux_dev(sc->kbdc);
} else {
VLOG(3, (LOG_DEBUG,
"psmintr: discard a byte (%d)\n",
sc->syncerrors));
pb->inputbytes--;
bcopy(&pb->ipacket[1], &pb->ipacket[0],
pb->inputbytes);
}
continue;
}
/*
* We have what appears to be a valid packet.
* Reset the error counters.
*/
sc->syncerrors = 0;
/*
* Drop even good packets if they occur within a timeout
* period of a sync error. This allows the detection of
* a change in the mouse's packet mode without exposing
* erratic mouse behavior to the user. Some KVMs forget
* enhanced mouse modes during switch events.
*/
if (!timeelapsed(&sc->lastinputerr, psmerrsecs, psmerrusecs,
&now)) {
pb->inputbytes = 0;
continue;
}
/*
* Now that we're out of the validation period, reset
* the packet error count.
*/
sc->pkterrors = 0;
sc->cmdcount++;
next:
if (++sc->pqueue_end >= PSM_PACKETQUEUE)
sc->pqueue_end = 0;
/*
* If we've filled the queue then call the softintr ourselves,
* otherwise schedule the interrupt for later.
*/
if (!timeelapsed(&sc->lastsoftintr, psmsecs, psmusecs, &now) ||
(sc->pqueue_end == sc->pqueue_start)) {
if ((sc->state & PSM_SOFTARMED) != 0) {
sc->state &= ~PSM_SOFTARMED;
callout_stop(&sc->softcallout);
}
psmsoftintr(arg);
} else if ((sc->state & PSM_SOFTARMED) == 0) {
sc->state |= PSM_SOFTARMED;
callout_reset(&sc->softcallout,
psmhz < 1 ? 1 : (hz/psmhz), psmsoftintr, arg);
}
}
}
static void
proc_mmanplus(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
{
/*
* PS2++ protocol packet
*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: * 1 p3 p2 1 * * *
* byte 2: c1 c2 p1 p0 d1 d0 1 0
*
* p3-p0: packet type
* c1, c2: c1 & c2 == 1, if p2 == 0
* c1 & c2 == 0, if p2 == 1
*
* packet type: 0 (device type)
* See comments in enable_mmanplus() below.
*
* packet type: 1 (wheel data)
*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 3: h * B5 B4 s d2 d1 d0
*
* h: 1, if horizontal roller data
* 0, if vertical roller data
* B4, B5: button 4 and 5
* s: sign bit
* d2-d0: roller data
*
* packet type: 2 (reserved)
*/
if (((pb->ipacket[0] & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC) &&
(abs(*x) > 191) && MOUSE_PS2PLUS_CHECKBITS(pb->ipacket)) {
/*
* the extended data packet encodes button
* and wheel events
*/
switch (MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket)) {
case 1:
/* wheel data packet */
*x = *y = 0;
if (pb->ipacket[2] & 0x80) {
/* XXX horizontal roller count - ignore it */
;
} else {
/* vertical roller count */
*z = (pb->ipacket[2] & MOUSE_PS2PLUS_ZNEG) ?
(pb->ipacket[2] & 0x0f) - 16 :
(pb->ipacket[2] & 0x0f);
}
ms->button |= (pb->ipacket[2] &
MOUSE_PS2PLUS_BUTTON4DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms->button |= (pb->ipacket[2] &
MOUSE_PS2PLUS_BUTTON5DOWN) ?
MOUSE_BUTTON5DOWN : 0;
break;
case 2:
/*
* this packet type is reserved by
* Logitech...
*/
/*
* IBM ScrollPoint Mouse uses this
* packet type to encode both vertical
* and horizontal scroll movement.
*/
*x = *y = 0;
/* horizontal count */
if (pb->ipacket[2] & 0x0f)
*z = (pb->ipacket[2] & MOUSE_SPOINT_WNEG) ?
-2 : 2;
/* vertical count */
if (pb->ipacket[2] & 0xf0)
*z = (pb->ipacket[2] & MOUSE_SPOINT_ZNEG) ?
-1 : 1;
break;
case 0:
/* device type packet - shouldn't happen */
/* FALLTHROUGH */
default:
*x = *y = 0;
ms->button = ms->obutton;
VLOG(1, (LOG_DEBUG, "psmintr: unknown PS2++ packet "
"type %d: 0x%02x 0x%02x 0x%02x\n",
MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket),
pb->ipacket[0], pb->ipacket[1], pb->ipacket[2]));
break;
}
} else {
/* preserve button states */
ms->button |= ms->obutton & MOUSE_EXTBUTTONS;
}
}
static int
proc_synaptics(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
{
static int touchpad_buttons;
static int guest_buttons;
static finger_t f[PSM_FINGERS];
int w, id, nfingers, ewcode, extended_buttons;
extended_buttons = 0;
/* TouchPad PS/2 absolute mode message format with capFourButtons:
*
* Bits: 7 6 5 4 3 2 1 0 (LSB)
* ------------------------------------------------
* ipacket[0]: 1 0 W3 W2 0 W1 R L
* ipacket[1]: Yb Ya Y9 Y8 Xb Xa X9 X8
* ipacket[2]: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0
* ipacket[3]: 1 1 Yc Xc 0 W0 D^R U^L
* ipacket[4]: X7 X6 X5 X4 X3 X2 X1 X0
* ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
*
* Legend:
* L: left physical mouse button
* R: right physical mouse button
* D: down button
* U: up button
* W: "wrist" value
* X: x position
* Y: y position
* Z: pressure
*
* Without capFourButtons but with nExtendeButtons and/or capMiddle
*
* Bits: 7 6 5 4 3 2 1 0 (LSB)
* ------------------------------------------------------
* ipacket[3]: 1 1 Yc Xc 0 W0 E^R M^L
* ipacket[4]: X7 X6 X5 X4 X3|b7 X2|b5 X1|b3 X0|b1
* ipacket[5]: Y7 Y6 Y5 Y4 Y3|b8 Y2|b6 Y1|b4 Y0|b2
*
* Legend:
* M: Middle physical mouse button
* E: Extended mouse buttons reported instead of low bits of X and Y
* b1-b8: Extended mouse buttons
* Only ((nExtendedButtons + 1) >> 1) bits are used in packet
* 4 and 5, for reading X and Y value they should be zeroed.
*
* Absolute reportable limits: 0 - 6143.
* Typical bezel limits: 1472 - 5472.
* Typical edge marings: 1632 - 5312.
*
* w = 3 Passthrough Packet
*
* Byte 2,5,6 == Byte 1,2,3 of "Guest"
*/
if (!synaptics_support)
return (0);
/* Sanity check for out of sync packets. */
if ((pb->ipacket[0] & 0xc8) != 0x80 ||
(pb->ipacket[3] & 0xc8) != 0xc0)
return (-1);
*x = *y = 0;
ms->button = ms->obutton;
/*
* Pressure value.
* Interpretation:
* z = 0 No finger contact
* z = 10 Finger hovering near the pad
* z = 30 Very light finger contact
* z = 80 Normal finger contact
* z = 110 Very heavy finger contact
* z = 200 Finger lying flat on pad surface
* z = 255 Maximum reportable Z
*/
*z = pb->ipacket[2];
/*
* Finger width value
* Interpretation:
* w = 0 Two finger on the pad (capMultiFinger needed)
* w = 1 Three or more fingers (capMultiFinger needed)
* w = 2 Pen (instead of finger) (capPen needed)
* w = 3 Reserved (passthrough?)
* w = 4-7 Finger of normal width (capPalmDetect needed)
* w = 8-14 Very wide finger or palm (capPalmDetect needed)
* w = 15 Maximum reportable width (capPalmDetect needed)
*/
/* XXX Is checking capExtended enough? */
if (sc->synhw.capExtended)
w = ((pb->ipacket[0] & 0x30) >> 2) |
((pb->ipacket[0] & 0x04) >> 1) |
((pb->ipacket[3] & 0x04) >> 2);
else {
/* Assume a finger of regular width. */
w = 4;
}
switch (w) {
case 3:
/*
* Handle packets from the guest device. See:
* Synaptics PS/2 TouchPad Interfacing Guide, Section 5.1
*/
if (sc->synhw.capPassthrough) {
*x = ((pb->ipacket[1] & 0x10) ?
pb->ipacket[4] - 256 : pb->ipacket[4]);
*y = ((pb->ipacket[1] & 0x20) ?
pb->ipacket[5] - 256 : pb->ipacket[5]);
*z = 0;
guest_buttons = 0;
if (pb->ipacket[1] & 0x01)
guest_buttons |= MOUSE_BUTTON1DOWN;
if (pb->ipacket[1] & 0x04)
guest_buttons |= MOUSE_BUTTON2DOWN;
if (pb->ipacket[1] & 0x02)
guest_buttons |= MOUSE_BUTTON3DOWN;
ms->button = touchpad_buttons | guest_buttons |
sc->extended_buttons;
}
goto SYNAPTICS_END;
case 2:
/* Handle Extended W mode packets */
ewcode = (pb->ipacket[5] & 0xf0) >> 4;
#if PSM_FINGERS > 1
switch (ewcode) {
case 1:
/* Secondary finger */
if (sc->synhw.capAdvancedGestures)
f[1] = (finger_t) {
.x = (((pb->ipacket[4] & 0x0f) << 8) |
pb->ipacket[1]) << 1,
.y = (((pb->ipacket[4] & 0xf0) << 4) |
pb->ipacket[2]) << 1,
.p = ((pb->ipacket[3] & 0x30) |
(pb->ipacket[5] & 0x0f)) << 1,
.w = PSM_FINGER_DEFAULT_W,
.flags = PSM_FINGER_FUZZY,
};
else if (sc->synhw.capReportsV)
f[1] = (finger_t) {
.x = (((pb->ipacket[4] & 0x0f) << 8) |
(pb->ipacket[1] & 0xfe)) << 1,
.y = (((pb->ipacket[4] & 0xf0) << 4) |
(pb->ipacket[2] & 0xfe)) << 1,
.p = ((pb->ipacket[3] & 0x30) |
(pb->ipacket[5] & 0x0e)) << 1,
.w = (((pb->ipacket[5] & 0x01) << 2) |
((pb->ipacket[2] & 0x01) << 1) |
(pb->ipacket[1] & 0x01)) + 8,
.flags = PSM_FINGER_FUZZY,
};
default:
break;
}
#endif
goto SYNAPTICS_END;
case 1:
case 0:
nfingers = w + 2;
break;
default:
nfingers = 1;
}
if (sc->syninfo.touchpad_off)
goto SYNAPTICS_END;
/* Button presses */
touchpad_buttons = 0;
if (pb->ipacket[0] & 0x01)
touchpad_buttons |= MOUSE_BUTTON1DOWN;
if (pb->ipacket[0] & 0x02)
touchpad_buttons |= MOUSE_BUTTON3DOWN;
if (sc->synhw.capExtended && sc->synhw.capFourButtons) {
if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x01)
touchpad_buttons |= MOUSE_BUTTON4DOWN;
if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x02)
touchpad_buttons |= MOUSE_BUTTON5DOWN;
} else if (sc->synhw.capExtended && sc->synhw.capMiddle &&
!sc->synhw.capClickPad) {
/* Middle Button */
if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x01)
touchpad_buttons |= MOUSE_BUTTON2DOWN;
} else if (sc->synhw.capExtended && (sc->synhw.nExtendedButtons > 0)) {
/* Extended Buttons */
if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x02) {
if (sc->syninfo.directional_scrolls) {
if (pb->ipacket[4] & 0x01)
extended_buttons |= MOUSE_BUTTON4DOWN;
if (pb->ipacket[5] & 0x01)
extended_buttons |= MOUSE_BUTTON5DOWN;
if (pb->ipacket[4] & 0x02)
extended_buttons |= MOUSE_BUTTON6DOWN;
if (pb->ipacket[5] & 0x02)
extended_buttons |= MOUSE_BUTTON7DOWN;
} else {
if (pb->ipacket[4] & 0x01)
extended_buttons |= MOUSE_BUTTON1DOWN;
if (pb->ipacket[5] & 0x01)
extended_buttons |= MOUSE_BUTTON3DOWN;
if (pb->ipacket[4] & 0x02)
extended_buttons |= MOUSE_BUTTON2DOWN;
sc->extended_buttons = extended_buttons;
}
/*
* Zero out bits used by extended buttons to avoid
* misinterpretation of the data absolute position.
*
* The bits represented by
*
* (nExtendedButtons + 1) >> 1
*
* will be masked out in both bytes.
* The mask for n bits is computed with the formula
*
* (1 << n) - 1
*/
int maskedbits = 0;
int mask = 0;
maskedbits = (sc->synhw.nExtendedButtons + 1) >> 1;
mask = (1 << maskedbits) - 1;
pb->ipacket[4] &= ~(mask);
pb->ipacket[5] &= ~(mask);
} else if (!sc->syninfo.directional_scrolls &&
!sc->gesture.in_vscroll) {
/*
* Keep reporting MOUSE DOWN until we get a new packet
* indicating otherwise.
*/
extended_buttons |= sc->extended_buttons;
}
}
/* Handle ClickPad */
if (sc->synhw.capClickPad &&
((pb->ipacket[0] ^ pb->ipacket[3]) & 0x01))
touchpad_buttons |= MOUSE_BUTTON1DOWN;
if (sc->synhw.capReportsV && nfingers > 1)
f[0] = (finger_t) {
.x = ((pb->ipacket[3] & 0x10) << 8) |
((pb->ipacket[1] & 0x0f) << 8) |
(pb->ipacket[4] & 0xfd),
.y = ((pb->ipacket[3] & 0x20) << 7) |
((pb->ipacket[1] & 0xf0) << 4) |
(pb->ipacket[5] & 0xfd),
.p = *z & 0xfe,
.w = (((pb->ipacket[2] & 0x01) << 2) |
(pb->ipacket[5] & 0x02) |
((pb->ipacket[4] & 0x02) >> 1)) + 8,
.flags = PSM_FINGER_FUZZY,
};
else
f[0] = (finger_t) {
.x = ((pb->ipacket[3] & 0x10) << 8) |
((pb->ipacket[1] & 0x0f) << 8) |
pb->ipacket[4],
.y = ((pb->ipacket[3] & 0x20) << 7) |
((pb->ipacket[1] & 0xf0) << 4) |
pb->ipacket[5],
.p = *z,
.w = w,
.flags = nfingers > 1 ? PSM_FINGER_FUZZY : 0,
};
/* Ignore hovering and unmeasurable touches */
if (f[0].p < sc->syninfo.min_pressure || f[0].x < 2)
nfingers = 0;
for (id = 0; id < PSM_FINGERS; id++)
if (id >= nfingers)
PSM_FINGER_RESET(f[id]);
ms->button = touchpad_buttons;
/* Palm detection doesn't terminate the current action. */
if (!psmpalmdetect(sc, &f[0], nfingers)) {
psmgestures(sc, &f[0], nfingers, ms);
for (id = 0; id < PSM_FINGERS; id++)
psmsmoother(sc, &f[id], id, ms, x, y);
} else {
VLOG(2, (LOG_DEBUG, "synaptics: palm detected! (%d)\n", f[0].w));
}
ms->button |= extended_buttons | guest_buttons;
SYNAPTICS_END:
/*
* Use the extra buttons as a scrollwheel
*
* XXX X.Org uses the Z axis for vertical wheel only,
* whereas moused(8) understands special values to differ
* vertical and horizontal wheels.
*
* xf86-input-mouse needs therefore a small patch to
* understand these special values. Without it, the
* horizontal wheel acts as a vertical wheel in X.Org.
*
* That's why the horizontal wheel is disabled by
* default for now.
*/
if (ms->button & MOUSE_BUTTON4DOWN)
*z = -1;
else if (ms->button & MOUSE_BUTTON5DOWN)
*z = 1;
else if (ms->button & MOUSE_BUTTON6DOWN)
*z = -2;
else if (ms->button & MOUSE_BUTTON7DOWN)
*z = 2;
else
*z = 0;
ms->button &= ~(MOUSE_BUTTON4DOWN | MOUSE_BUTTON5DOWN |
MOUSE_BUTTON6DOWN | MOUSE_BUTTON7DOWN);
return (0);
}
static int
psmpalmdetect(struct psm_softc *sc, finger_t *f, int nfingers)
{
if (!(
((sc->synhw.capMultiFinger ||
sc->synhw.capAdvancedGestures) && nfingers > 1) ||
(sc->synhw.capPalmDetect && f->w <= sc->syninfo.max_width) ||
(!sc->synhw.capPalmDetect && f->p <= sc->syninfo.max_pressure) ||
(sc->synhw.capPen && f->flags & PSM_FINGER_IS_PEN))) {
/*
* We consider the packet irrelevant for the current
* action when:
* - the width isn't comprised in:
* [1; max_width]
* - the pressure isn't comprised in:
* [min_pressure; max_pressure]
* - pen aren't supported but PSM_FINGER_IS_PEN is set
*/
return (1);
}
return (0);
}
static void
psmgestures(struct psm_softc *sc, finger_t *fingers, int nfingers,
mousestatus_t *ms)
{
smoother_t *smoother;
gesture_t *gest;
finger_t *f;
int y_ok, center_button, center_x, right_button, right_x, i;
f = &fingers[0];
smoother = &sc->smoother[0];
gest = &sc->gesture;
/* Find first active finger. */
if (nfingers > 0) {
for (i = 0; i < PSM_FINGERS; i++) {
if (PSM_FINGER_IS_SET(fingers[i])) {
f = &fingers[i];
smoother = &sc->smoother[i];
break;
}
}
}
/*
* Check pressure to detect a real wanted action on the
* touchpad.
*/
if (f->p >= sc->syninfo.min_pressure) {
int x0, y0;
int dxp, dyp;
int start_x, start_y;
int queue_len;
int margin_top, margin_right, margin_bottom, margin_left;
int window_min, window_max;
int vscroll_hor_area, vscroll_ver_area;
int two_finger_scroll;
int max_x, max_y;
/* Read sysctl. */
/* XXX Verify values? */
margin_top = sc->syninfo.margin_top;
margin_right = sc->syninfo.margin_right;
margin_bottom = sc->syninfo.margin_bottom;
margin_left = sc->syninfo.margin_left;
window_min = sc->syninfo.window_min;
window_max = sc->syninfo.window_max;
vscroll_hor_area = sc->syninfo.vscroll_hor_area;
vscroll_ver_area = sc->syninfo.vscroll_ver_area;
two_finger_scroll = sc->syninfo.two_finger_scroll;
max_x = sc->syninfo.max_x;
max_y = sc->syninfo.max_y;
/* Read current absolute position. */
x0 = f->x;
y0 = f->y;
/*
* Limit the coordinates to the specified margins because
* this area isn't very reliable.
*/
if (x0 <= margin_left)
x0 = margin_left;
else if (x0 >= max_x - margin_right)
x0 = max_x - margin_right;
if (y0 <= margin_bottom)
y0 = margin_bottom;
else if (y0 >= max_y - margin_top)
y0 = max_y - margin_top;
VLOG(3, (LOG_DEBUG, "synaptics: ipacket: [%d, %d], %d, %d\n",
x0, y0, f->p, f->w));
/*
* If the action is just beginning, init the structure and
* compute tap timeout.
*/
if (!(sc->flags & PSM_FLAGS_FINGERDOWN)) {
VLOG(3, (LOG_DEBUG, "synaptics: ----\n"));
/* Initialize queue. */
gest->window_min = window_min;
/* Reset pressure peak. */
gest->zmax = 0;
/* Reset fingers count. */
gest->fingers_nb = 0;
/* Reset virtual scrolling state. */
gest->in_vscroll = 0;
/* Compute tap timeout. */
gest->taptimeout.tv_sec = tap_timeout / 1000000;
gest->taptimeout.tv_usec = tap_timeout % 1000000;
timevaladd(&gest->taptimeout, &sc->lastsoftintr);
sc->flags |= PSM_FLAGS_FINGERDOWN;
/* Smoother has not been reset yet */
queue_len = 1;
start_x = x0;
start_y = y0;
} else {
queue_len = smoother->queue_len + 1;
start_x = smoother->start_x;
start_y = smoother->start_y;
}
/* Process ClickPad softbuttons */
if (sc->synhw.capClickPad && ms->button & MOUSE_BUTTON1DOWN) {
y_ok = sc->syninfo.softbuttons_y >= 0 ?
start_y < sc->syninfo.softbuttons_y :
start_y > max_y - sc->syninfo.softbuttons_y;
center_button = MOUSE_BUTTON2DOWN;
center_x = sc->syninfo.softbutton2_x;
right_button = MOUSE_BUTTON3DOWN;
right_x = sc->syninfo.softbutton3_x;
if (center_x > 0 && right_x > 0 && center_x > right_x) {
center_button = MOUSE_BUTTON3DOWN;
center_x = sc->syninfo.softbutton3_x;
right_button = MOUSE_BUTTON2DOWN;
right_x = sc->syninfo.softbutton2_x;
}
if (right_x > 0 && start_x > right_x && y_ok)
ms->button = (ms->button &
~MOUSE_BUTTON1DOWN) | right_button;
else if (center_x > 0 && start_x > center_x && y_ok)
ms->button = (ms->button &
~MOUSE_BUTTON1DOWN) | center_button;
}
/* If in tap-hold, add the recorded button. */
if (gest->in_taphold)
ms->button |= gest->tap_button;
/*
* For tap, we keep the maximum number of fingers and the
* pressure peak. Also with multiple fingers, we increase
* the minimum window.
*/
if (nfingers > 1)
gest->window_min = window_max;
gest->fingers_nb = imax(nfingers, gest->fingers_nb);
gest->zmax = imax(f->p, gest->zmax);
/* Do we have enough packets to consider this a gesture? */
if (queue_len < gest->window_min)
return;
/* Is a scrolling action occurring? */
if (!gest->in_taphold && !ms->button &&
(!gest->in_vscroll || two_finger_scroll)) {
/*
* A scrolling action must not conflict with a tap
* action. Here are the conditions to consider a
* scrolling action:
* - the action in a configurable area
* - one of the following:
* . the distance between the last packet and the
* first should be above a configurable minimum
* . tap timed out
*/
dxp = abs(x0 - start_x);
dyp = abs(y0 - start_y);
if (timevalcmp(&sc->lastsoftintr, &gest->taptimeout, >) ||
dxp >= sc->syninfo.vscroll_min_delta ||
dyp >= sc->syninfo.vscroll_min_delta) {
/*
* Handle two finger scrolling.
* Note that we don't rely on fingers_nb
* as that keeps the maximum number of fingers.
*/
if (two_finger_scroll) {
if (nfingers == 2) {
gest->in_vscroll +=
dyp ? 2 : 0;
gest->in_vscroll +=
dxp ? 1 : 0;
}
} else {
/* Check for horizontal scrolling. */
if ((vscroll_hor_area > 0 &&
start_y <= vscroll_hor_area) ||
(vscroll_hor_area < 0 &&
start_y >=
max_y + vscroll_hor_area))
gest->in_vscroll += 2;
/* Check for vertical scrolling. */
if ((vscroll_ver_area > 0 &&
start_x <= vscroll_ver_area) ||
(vscroll_ver_area < 0 &&
start_x >=
max_x + vscroll_ver_area))
gest->in_vscroll += 1;
}
/* Avoid conflicts if area overlaps. */
if (gest->in_vscroll >= 3)
gest->in_vscroll =
(dxp > dyp) ? 2 : 1;
}
}
/*
* Reset two finger scrolling when the number of fingers
* is different from two or any button is pressed.
*/
if (two_finger_scroll && gest->in_vscroll != 0 &&
(nfingers != 2 || ms->button))
gest->in_vscroll = 0;
VLOG(5, (LOG_DEBUG,
"synaptics: virtual scrolling: %s "
"(direction=%d, dxp=%d, dyp=%d, fingers=%d)\n",
gest->in_vscroll ? "YES" : "NO",
gest->in_vscroll, dxp, dyp,
gest->fingers_nb));
} else if (sc->flags & PSM_FLAGS_FINGERDOWN) {
/*
* An action is currently taking place but the pressure
* dropped under the minimum, putting an end to it.
*/
int taphold_timeout, dx, dy, tap_max_delta;
dx = abs(smoother->queue[smoother->queue_cursor].x -
smoother->start_x);
dy = abs(smoother->queue[smoother->queue_cursor].y -
smoother->start_y);
/* Max delta is disabled for multi-fingers tap. */
if (gest->fingers_nb > 1)
tap_max_delta = imax(dx, dy);
else
tap_max_delta = sc->syninfo.tap_max_delta;
sc->flags &= ~PSM_FLAGS_FINGERDOWN;
/* Check for tap. */
VLOG(3, (LOG_DEBUG,
"synaptics: zmax=%d, dx=%d, dy=%d, "
"delta=%d, fingers=%d, queue=%d\n",
gest->zmax, dx, dy, tap_max_delta, gest->fingers_nb,
smoother->queue_len));
if (!gest->in_vscroll && gest->zmax >= tap_threshold &&
timevalcmp(&sc->lastsoftintr, &gest->taptimeout, <=) &&
dx <= tap_max_delta && dy <= tap_max_delta &&
smoother->queue_len >= sc->syninfo.tap_min_queue) {
/*
* We have a tap if:
* - the maximum pressure went over tap_threshold
* - the action ended before tap_timeout
*
* To handle tap-hold, we must delay any button push to
* the next action.
*/
if (gest->in_taphold) {
/*
* This is the second and last tap of a
* double tap action, not a tap-hold.
*/
gest->in_taphold = 0;
/*
* For double-tap to work:
* - no button press is emitted (to
* simulate a button release)
* - PSM_FLAGS_FINGERDOWN is set to
* force the next packet to emit a
* button press)
*/
VLOG(2, (LOG_DEBUG,
"synaptics: button RELEASE: %d\n",
gest->tap_button));
sc->flags |= PSM_FLAGS_FINGERDOWN;
/* Schedule button press on next interrupt */
sc->idletimeout.tv_sec = psmhz > 1 ?
0 : 1;
sc->idletimeout.tv_usec = psmhz > 1 ?
1000000 / psmhz : 0;
} else {
/*
* This is the first tap: we set the
* tap-hold state and notify the button
* down event.
*/
gest->in_taphold = 1;
taphold_timeout = sc->syninfo.taphold_timeout;
gest->taptimeout.tv_sec = taphold_timeout /
1000000;
gest->taptimeout.tv_usec = taphold_timeout %
1000000;
sc->idletimeout = gest->taptimeout;
timevaladd(&gest->taptimeout,
&sc->lastsoftintr);
switch (gest->fingers_nb) {
case 3:
gest->tap_button =
MOUSE_BUTTON2DOWN;
break;
case 2:
gest->tap_button =
MOUSE_BUTTON3DOWN;
break;
default:
gest->tap_button =
MOUSE_BUTTON1DOWN;
}
VLOG(2, (LOG_DEBUG,
"synaptics: button PRESS: %d\n",
gest->tap_button));
ms->button |= gest->tap_button;
}
} else {
/*
* Not enough pressure or timeout: reset
* tap-hold state.
*/
if (gest->in_taphold) {
VLOG(2, (LOG_DEBUG,
"synaptics: button RELEASE: %d\n",
gest->tap_button));
gest->in_taphold = 0;
} else {
VLOG(2, (LOG_DEBUG,
"synaptics: not a tap-hold\n"));
}
}
} else if (!(sc->flags & PSM_FLAGS_FINGERDOWN) && gest->in_taphold) {
/*
* For a tap-hold to work, the button must remain down at
* least until timeout (where the in_taphold flags will be
* cleared) or during the next action.
*/
if (timevalcmp(&sc->lastsoftintr, &gest->taptimeout, <=)) {
ms->button |= gest->tap_button;
} else {
VLOG(2, (LOG_DEBUG, "synaptics: button RELEASE: %d\n",
gest->tap_button));
gest->in_taphold = 0;
}
}
return;
}
static void
psmsmoother(struct psm_softc *sc, finger_t *f, int smoother_id,
mousestatus_t *ms, int *x, int *y)
{
smoother_t *smoother = &sc->smoother[smoother_id];
gesture_t *gest = &(sc->gesture);
/*
* Check pressure to detect a real wanted action on the
* touchpad.
*/
if (f->p >= sc->syninfo.min_pressure) {
int x0, y0;
int cursor, peer, window;
int dx, dy, dxp, dyp;
int max_width, max_pressure;
int margin_top, margin_right, margin_bottom, margin_left;
int na_top, na_right, na_bottom, na_left;
int window_min, window_max;
int multiplicator;
int weight_current, weight_previous, weight_len_squared;
int div_min, div_max, div_len;
int vscroll_hor_area, vscroll_ver_area;
int two_finger_scroll;
int max_x, max_y;
int len, weight_prev_x, weight_prev_y;
int div_max_x, div_max_y, div_x, div_y;
int is_fuzzy;
/* Read sysctl. */
/* XXX Verify values? */
max_width = sc->syninfo.max_width;
max_pressure = sc->syninfo.max_pressure;
margin_top = sc->syninfo.margin_top;
margin_right = sc->syninfo.margin_right;
margin_bottom = sc->syninfo.margin_bottom;
margin_left = sc->syninfo.margin_left;
na_top = sc->syninfo.na_top;
na_right = sc->syninfo.na_right;
na_bottom = sc->syninfo.na_bottom;
na_left = sc->syninfo.na_left;
window_min = sc->syninfo.window_min;
window_max = sc->syninfo.window_max;
multiplicator = sc->syninfo.multiplicator;
weight_current = sc->syninfo.weight_current;
weight_previous = sc->syninfo.weight_previous;
weight_len_squared = sc->syninfo.weight_len_squared;
div_min = sc->syninfo.div_min;
div_max = sc->syninfo.div_max;
div_len = sc->syninfo.div_len;
vscroll_hor_area = sc->syninfo.vscroll_hor_area;
vscroll_ver_area = sc->syninfo.vscroll_ver_area;
two_finger_scroll = sc->syninfo.two_finger_scroll;
max_x = sc->syninfo.max_x;
max_y = sc->syninfo.max_y;
is_fuzzy = (f->flags & PSM_FINGER_FUZZY) != 0;
/* Read current absolute position. */
x0 = f->x;
y0 = f->y;
/*
* Limit the coordinates to the specified margins because
* this area isn't very reliable.
*/
if (x0 <= margin_left)
x0 = margin_left;
else if (x0 >= max_x - margin_right)
x0 = max_x - margin_right;
if (y0 <= margin_bottom)
y0 = margin_bottom;
else if (y0 >= max_y - margin_top)
y0 = max_y - margin_top;
/* If the action is just beginning, init the structure. */
if (smoother->active == 0) {
VLOG(3, (LOG_DEBUG, "smoother%d: ---\n", smoother_id));
/* Store the first point of this action. */
smoother->start_x = x0;
smoother->start_y = y0;
dx = dy = 0;
/* Initialize queue. */
smoother->queue_cursor = SYNAPTICS_PACKETQUEUE;
smoother->queue_len = 0;
/* Reset average. */
smoother->avg_dx = 0;
smoother->avg_dy = 0;
/* Reset squelch. */
smoother->squelch_x = 0;
smoother->squelch_y = 0;
/* Activate queue */
smoother->active = 1;
} else {
/* Calculate the current delta. */
cursor = smoother->queue_cursor;
dx = x0 - smoother->queue[cursor].x;
dy = y0 - smoother->queue[cursor].y;
}
VLOG(3, (LOG_DEBUG, "smoother%d: ipacket: [%d, %d], %d, %d\n",
smoother_id, x0, y0, f->p, f->w));
/* Queue this new packet. */
cursor = SYNAPTICS_QUEUE_CURSOR(smoother->queue_cursor - 1);
smoother->queue[cursor].x = x0;
smoother->queue[cursor].y = y0;
smoother->queue_cursor = cursor;
if (smoother->queue_len < SYNAPTICS_PACKETQUEUE)
smoother->queue_len++;
VLOG(5, (LOG_DEBUG,
"smoother%d: cursor[%d]: x=%d, y=%d, dx=%d, dy=%d\n",
smoother_id, cursor, x0, y0, dx, dy));
/* Do we have enough packets to consider this a movement? */
if (smoother->queue_len < gest->window_min)
return;
weight_prev_x = weight_prev_y = weight_previous;
div_max_x = div_max_y = div_max;
if (gest->in_vscroll) {
/* Dividers are different with virtual scrolling. */
div_min = sc->syninfo.vscroll_div_min;
div_max_x = div_max_y = sc->syninfo.vscroll_div_max;
} else {
/*
* There's a lot of noise in coordinates when
* the finger is on the touchpad's borders. When
* using this area, we apply a special weight and
* div.
*/
if (x0 <= na_left || x0 >= max_x - na_right) {
weight_prev_x = sc->syninfo.weight_previous_na;
div_max_x = sc->syninfo.div_max_na;
}
if (y0 <= na_bottom || y0 >= max_y - na_top) {
weight_prev_y = sc->syninfo.weight_previous_na;
div_max_y = sc->syninfo.div_max_na;
}
}
/*
* Calculate weights for the average operands and
* the divisor. Both depend on the distance between
* the current packet and a previous one (based on the
* window width).
*/
window = imin(smoother->queue_len, window_max);
peer = SYNAPTICS_QUEUE_CURSOR(cursor + window - 1);
dxp = abs(x0 - smoother->queue[peer].x) + 1;
dyp = abs(y0 - smoother->queue[peer].y) + 1;
len = (dxp * dxp) + (dyp * dyp);
weight_prev_x = imin(weight_prev_x,
weight_len_squared * weight_prev_x / len);
weight_prev_y = imin(weight_prev_y,
weight_len_squared * weight_prev_y / len);
len = (dxp + dyp) / 2;
div_x = div_len * div_max_x / len;
div_x = imin(div_max_x, div_x);
div_x = imax(div_min, div_x);
div_y = div_len * div_max_y / len;
div_y = imin(div_max_y, div_y);
div_y = imax(div_min, div_y);
VLOG(3, (LOG_DEBUG,
"smoother%d: peer=%d, len=%d, weight=%d/%d, div=%d/%d\n",
smoother_id, peer, len, weight_prev_x, weight_prev_y,
div_x, div_y));
/* Compute averages. */
smoother->avg_dx =
(weight_current * dx * multiplicator +
weight_prev_x * smoother->avg_dx) /
(weight_current + weight_prev_x);
smoother->avg_dy =
(weight_current * dy * multiplicator +
weight_prev_y * smoother->avg_dy) /
(weight_current + weight_prev_y);
VLOG(5, (LOG_DEBUG,
"smoother%d: avg_dx~=%d, avg_dy~=%d\n", smoother_id,
smoother->avg_dx / multiplicator,
smoother->avg_dy / multiplicator));
/* Use these averages to calculate x & y. */
smoother->squelch_x += smoother->avg_dx;
dxp = smoother->squelch_x / (div_x * multiplicator);
smoother->squelch_x = smoother->squelch_x %
(div_x * multiplicator);
smoother->squelch_y += smoother->avg_dy;
dyp = smoother->squelch_y / (div_y * multiplicator);
smoother->squelch_y = smoother->squelch_y %
(div_y * multiplicator);
switch(gest->in_vscroll) {
case 0: /* Pointer movement. */
/* On real<->fuzzy finger switch the x/y pos jumps */
if (is_fuzzy == smoother->is_fuzzy) {
*x += dxp;
*y += dyp;
}
VLOG(3, (LOG_DEBUG, "smoother%d: [%d, %d] -> [%d, %d]\n",
smoother_id, dx, dy, dxp, dyp));
break;
case 1: /* Vertical scrolling. */
if (dyp != 0)
ms->button |= (dyp > 0) ?
MOUSE_BUTTON4DOWN : MOUSE_BUTTON5DOWN;
break;
case 2: /* Horizontal scrolling. */
if (dxp != 0)
ms->button |= (dxp > 0) ?
MOUSE_BUTTON7DOWN : MOUSE_BUTTON6DOWN;
break;
}
smoother->is_fuzzy = is_fuzzy;
} else {
/*
* Deactivate queue. Note: We can not just reset queue here
* as these values are still used by gesture processor.
* So postpone reset till next touch.
*/
smoother->active = 0;
}
}
static int
proc_elantech(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
{
static int touchpad_button, trackpoint_button;
finger_t fn, f[ELANTECH_MAX_FINGERS];
int pkt, id, scale, i, nfingers, mask;
if (!elantech_support)
return (0);
/* Determine packet format and do a sanity check for out of sync packets. */
if (ELANTECH_PKT_IS_DEBOUNCE(pb, sc->elanhw.hwversion))
pkt = ELANTECH_PKT_NOP;
else if (ELANTECH_PKT_IS_TRACKPOINT(pb))
pkt = ELANTECH_PKT_TRACKPOINT;
else
switch (sc->elanhw.hwversion) {
case 2:
if (!ELANTECH_PKT_IS_V2(pb))
return (-1);
pkt = (pb->ipacket[0] & 0xc0) == 0x80 ?
ELANTECH_PKT_V2_2FINGER : ELANTECH_PKT_V2_COMMON;
break;
case 3:
if (!ELANTECH_PKT_IS_V3_HEAD(pb, sc->elanhw.hascrc) &&
!ELANTECH_PKT_IS_V3_TAIL(pb, sc->elanhw.hascrc))
return (-1);
pkt = ELANTECH_PKT_V3;
break;
case 4:
if (!ELANTECH_PKT_IS_V4(pb, sc->elanhw.hascrc))
return (-1);
switch (pb->ipacket[3] & 0x03) {
case 0x00:
pkt = ELANTECH_PKT_V4_STATUS;
break;
case 0x01:
pkt = ELANTECH_PKT_V4_HEAD;
break;
case 0x02:
pkt = ELANTECH_PKT_V4_MOTION;
break;
default:
return (-1);
}
break;
default:
return (-1);
}
VLOG(5, (LOG_DEBUG, "elantech: ipacket format: %d\n", pkt));
for (id = 0; id < ELANTECH_MAX_FINGERS; id++)
PSM_FINGER_RESET(f[id]);
*x = *y = *z = 0;
ms->button = ms->obutton;
if (sc->syninfo.touchpad_off)
return (0);
/* Common legend
* L: Left mouse button pressed
* R: Right mouse button pressed
* N: number of fingers on touchpad
* X: absolute x value (horizontal)
* Y: absolute y value (vertical)
* W; width of the finger touch
* P: pressure
*/
switch (pkt) {
case ELANTECH_PKT_V2_COMMON: /* HW V2. One/Three finger touch */
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: N1 N0 W3 W2 . . R L
* ipacket[1]: P7 P6 P5 P4 X11 X10 X9 X8
* ipacket[2]: X7 X6 X5 X4 X3 X2 X1 X0
* ipacket[3]: N4 VF W1 W0 . . . B2
* ipacket[4]: P3 P1 P2 P0 Y11 Y10 Y9 Y8
* ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
* -------------------------------------------
* N4: set if more than 3 fingers (only in 3 fingers mode)
* VF: a kind of flag? (only on EF123, 0 when finger
* is over one of the buttons, 1 otherwise)
* B2: (on EF113 only, 0 otherwise), one button pressed
* P & W is not reported on EF113 touchpads
*/
nfingers = (pb->ipacket[0] & 0xc0) >> 6;
if (nfingers == 3 && (pb->ipacket[3] & 0x80))
nfingers = 4;
mask = (1 << nfingers) - 1;
fn = ELANTECH_FINGER_SET_XYP(pb);
if (sc->elanhw.haspressure) {
fn.w = ((pb->ipacket[0] & 0x30) >> 2) |
((pb->ipacket[3] & 0x30) >> 4);
} else {
fn.p = PSM_FINGER_DEFAULT_P;
fn.w = PSM_FINGER_DEFAULT_W;
}
/*
* HW v2 dont report exact finger positions when 3 or more
* fingers are on touchpad. Use reported value as fingers
* position as it is required for tap detection
*/
if (nfingers > 2)
fn.flags = PSM_FINGER_FUZZY;
for (id = 0; id < imin(nfingers, ELANTECH_MAX_FINGERS); id++)
f[id] = fn;
break;
case ELANTECH_PKT_V2_2FINGER: /*HW V2. Two finger touch */
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: N1 N0 AY8 AX8 . . R L
* ipacket[1]: AX7 AX6 AX5 AX4 AX3 AX2 AX1 AX0
* ipacket[2]: AY7 AY6 AY5 AY4 AY3 AY2 AY1 AY0
* ipacket[3]: . . BY8 BX8 . . . .
* ipacket[4]: BX7 BX6 BX5 BX4 BX3 BX2 BX1 BX0
* ipacket[5]: BY7 BY6 BY5 BY4 BY3 BY2 BY1 BY0
* -------------------------------------------
* AX: lower-left finger absolute x value
* AY: lower-left finger absolute y value
* BX: upper-right finger absolute x value
* BY: upper-right finger absolute y value
*/
nfingers = 2;
mask = (1 << nfingers) - 1;
for (id = 0; id < imin(2, ELANTECH_MAX_FINGERS); id ++)
f[id] = (finger_t) {
.x = (((pb->ipacket[id * 3] & 0x10) << 4) |
pb->ipacket[id * 3 + 1]) << 2,
.y = (((pb->ipacket[id * 3] & 0x20) << 3) |
pb->ipacket[id * 3 + 2]) << 2,
.p = PSM_FINGER_DEFAULT_P,
.w = PSM_FINGER_DEFAULT_W,
/* HW ver.2 sends bounding box */
.flags = PSM_FINGER_FUZZY
};
break;
case ELANTECH_PKT_V3: /* HW Version 3 */
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: N1 N0 W3 W2 0 1 R L
* ipacket[1]: P7 P6 P5 P4 X11 X10 X9 X8
* ipacket[2]: X7 X6 X5 X4 X3 X2 X1 X0
* ipacket[3]: 0 0 W1 W0 0 0 1 0
* ipacket[4]: P3 P1 P2 P0 Y11 Y10 Y9 Y8
* ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
* -------------------------------------------
*/
nfingers = (pb->ipacket[0] & 0xc0) >> 6;
mask = (1 << nfingers) - 1;
id = nfingers - 1;
fn = ELANTECH_FINGER_SET_XYP(pb);
fn.w = ((pb->ipacket[0] & 0x30) >> 2) |
((pb->ipacket[3] & 0x30) >> 4);
/*
* HW v3 dont report exact finger positions when 3 or more
* fingers are on touchpad. Use reported value as fingers
* position as it is required for tap detection
*/
if (nfingers > 1)
fn.flags = PSM_FINGER_FUZZY;
for (id = 0; id < imin(nfingers, ELANTECH_MAX_FINGERS); id++)
f[id] = fn;
if (nfingers == 2) {
if (ELANTECH_PKT_IS_V3_HEAD(pb, sc->elanhw.hascrc)) {
sc->elanaction.fingers[0] = fn;
return (0);
} else
f[0] = sc->elanaction.fingers[0];
}
break;
case ELANTECH_PKT_V4_STATUS: /* HW Version 4. Status packet */
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: . . . . 0 1 R L
* ipacket[1]: . . . F4 F3 F2 F1 F0
* ipacket[2]: . . . . . . . .
* ipacket[3]: . . . 1 0 0 0 0
* ipacket[4]: PL . . . . . . .
* ipacket[5]: . . . . . . . .
* -------------------------------------------
* Fn: finger n is on touchpad
* PL: palm
* HV ver4 sends a status packet to indicate that the numbers
* or identities of the fingers has been changed
*/
mask = pb->ipacket[1] & 0x1f;
nfingers = bitcount(mask);
/* Skip "new finger is on touchpad" packets */
if ((sc->elanaction.mask & mask) == sc->elanaction.mask &&
(mask & ~sc->elanaction.mask)) {
sc->elanaction.mask = mask;
return (0);
}
break;
case ELANTECH_PKT_V4_HEAD: /* HW Version 4. Head packet */
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: W3 W2 W1 W0 0 1 R L
* ipacket[1]: P7 P6 P5 P4 X11 X10 X9 X8
* ipacket[2]: X7 X6 X5 X4 X3 X2 X1 X0
* ipacket[3]: ID2 ID1 ID0 1 0 0 0 1
* ipacket[4]: P3 P1 P2 P0 Y11 Y10 Y9 Y8
* ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
* -------------------------------------------
* ID: finger id
* HW ver 4 sends head packets in two cases:
* 1. One finger touch and movement.
* 2. Next after status packet to tell new finger positions.
*/
mask = sc->elanaction.mask;
nfingers = bitcount(mask);
id = ((pb->ipacket[3] & 0xe0) >> 5) - 1;
if (id >= 0 && id < ELANTECH_MAX_FINGERS) {
f[id] = ELANTECH_FINGER_SET_XYP(pb);
f[id].w = (pb->ipacket[0] & 0xf0) >> 4;
}
break;
case ELANTECH_PKT_V4_MOTION: /* HW Version 4. Motion packet */
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: ID2 ID1 ID0 OF 0 1 R L
* ipacket[1]: DX7 DX6 DX5 DX4 DX3 DX2 DX1 DX0
* ipacket[2]: DY7 DY6 DY5 DY4 DY3 DY2 DY1 DY0
* ipacket[3]: ID2 ID1 ID0 1 0 0 1 0
* ipacket[4]: DX7 DX6 DX5 DX4 DX3 DX2 DX1 DX0
* ipacket[5]: DY7 DY6 DY5 DY4 DY3 DY2 DY1 DY0
* -------------------------------------------
* OF: delta overflows (> 127 or < -128), in this case
* firmware sends us (delta x / 5) and (delta y / 5)
* ID: finger id
* DX: delta x (two's complement)
* XY: delta y (two's complement)
* byte 0 ~ 2 for one finger
* byte 3 ~ 5 for another finger
*/
mask = sc->elanaction.mask;
nfingers = bitcount(mask);
scale = (pb->ipacket[0] & 0x10) ? 5 : 1;
for (i = 0; i <= 3; i += 3) {
id = ((pb->ipacket[i] & 0xe0) >> 5) - 1;
if (id < 0 || id >= ELANTECH_MAX_FINGERS)
continue;
if (PSM_FINGER_IS_SET(sc->elanaction.fingers[id])) {
f[id] = sc->elanaction.fingers[id];
f[id].x += imax(-f[id].x,
(signed char)pb->ipacket[i+1] * scale);
f[id].y += imax(-f[id].y,
(signed char)pb->ipacket[i+2] * scale);
} else {
VLOG(3, (LOG_DEBUG, "elantech: "
"HW v4 motion packet skipped\n"));
}
}
break;
case ELANTECH_PKT_TRACKPOINT:
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: 0 0 SX SY 0 M R L
* ipacket[1]: ~SX 0 0 0 0 0 0 0
* ipacket[2]: ~SY 0 0 0 0 0 0 0
* ipacket[3]: 0 0 ~SY ~SX 0 1 1 0
* ipacket[4]: X7 X6 X5 X4 X3 X2 X1 X0
* ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
* -------------------------------------------
* X and Y are written in two's complement spread
* over 9 bits with SX/SY the relative top bit and
* X7..X0 and Y7..Y0 the lower bits.
*/
*x = (pb->ipacket[0] & 0x20) ?
pb->ipacket[4] - 256 : pb->ipacket[4];
*y = (pb->ipacket[0] & 0x10) ?
pb->ipacket[5] - 256 : pb->ipacket[5];
trackpoint_button =
((pb->ipacket[0] & 0x01) ? MOUSE_BUTTON1DOWN : 0) |
((pb->ipacket[0] & 0x02) ? MOUSE_BUTTON3DOWN : 0) |
((pb->ipacket[0] & 0x04) ? MOUSE_BUTTON2DOWN : 0);
ms->button = touchpad_button | trackpoint_button;
return (0);
case ELANTECH_PKT_NOP:
return (0);
default:
return (-1);
}
for (id = 0; id < ELANTECH_MAX_FINGERS; id++)
if (PSM_FINGER_IS_SET(f[id]))
VLOG(2, (LOG_DEBUG, "elantech: "
"finger %d: down [%d, %d], %d, %d, %d\n", id + 1,
f[id].x, f[id].y, f[id].p, f[id].w, f[id].flags));
/* Touchpad button presses */
if (sc->elanhw.isclickpad) {
touchpad_button =
((pb->ipacket[0] & 0x03) ? MOUSE_BUTTON1DOWN : 0);
} else {
touchpad_button =
((pb->ipacket[0] & 0x01) ? MOUSE_BUTTON1DOWN : 0) |
((pb->ipacket[0] & 0x02) ? MOUSE_BUTTON3DOWN : 0);
}
ms->button = touchpad_button | trackpoint_button;
/* Palm detection doesn't terminate the current action. */
if (!psmpalmdetect(sc, &f[0], nfingers)) {
/* Send finger 1 position to gesture processor */
if (PSM_FINGER_IS_SET(f[0]) || PSM_FINGER_IS_SET(f[1]) ||
nfingers == 0)
psmgestures(sc, &f[0], imin(nfingers, 3), ms);
/* Send fingers positions to movement smoothers */
for (id = 0; id < PSM_FINGERS; id++)
if (PSM_FINGER_IS_SET(f[id]) || !(mask & (1 << id)))
psmsmoother(sc, &f[id], id, ms, x, y);
} else {
VLOG(2, (LOG_DEBUG, "elantech: palm detected! (%d)\n",
f[0].w));
}
/* Store current finger positions in action context */
for (id = 0; id < ELANTECH_MAX_FINGERS; id++) {
if (PSM_FINGER_IS_SET(f[id]))
sc->elanaction.fingers[id] = f[id];
if ((sc->elanaction.mask & (1 << id)) && !(mask & (1 << id)))
PSM_FINGER_RESET(sc->elanaction.fingers[id]);
}
sc->elanaction.mask = mask;
/* Use the extra buttons as a scrollwheel */
if (ms->button & MOUSE_BUTTON4DOWN)
*z = -1;
else if (ms->button & MOUSE_BUTTON5DOWN)
*z = 1;
else if (ms->button & MOUSE_BUTTON6DOWN)
*z = -2;
else if (ms->button & MOUSE_BUTTON7DOWN)
*z = 2;
else
*z = 0;
ms->button &= ~(MOUSE_BUTTON4DOWN | MOUSE_BUTTON5DOWN |
MOUSE_BUTTON6DOWN | MOUSE_BUTTON7DOWN);
return (0);
}
static void
proc_versapad(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
{
static int butmap_versapad[8] = {
0,
MOUSE_BUTTON3DOWN,
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN
};
int c, x0, y0;
/* VersaPad PS/2 absolute mode message format
*
* [packet1] 7 6 5 4 3 2 1 0(LSB)
* ipacket[0]: 1 1 0 A 1 L T R
* ipacket[1]: H7 H6 H5 H4 H3 H2 H1 H0
* ipacket[2]: V7 V6 V5 V4 V3 V2 V1 V0
* ipacket[3]: 1 1 1 A 1 L T R
* ipacket[4]:V11 V10 V9 V8 H11 H10 H9 H8
* ipacket[5]: 0 P6 P5 P4 P3 P2 P1 P0
*
* [note]
* R: right physical mouse button (1=on)
* T: touch pad virtual button (1=tapping)
* L: left physical mouse button (1=on)
* A: position data is valid (1=valid)
* H: horizontal data (12bit signed integer. H11 is sign bit.)
* V: vertical data (12bit signed integer. V11 is sign bit.)
* P: pressure data
*
* Tapping is mapped to MOUSE_BUTTON4.
*/
c = pb->ipacket[0];
*x = *y = 0;
ms->button = butmap_versapad[c & MOUSE_PS2VERSA_BUTTONS];
ms->button |= (c & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0;
if (c & MOUSE_PS2VERSA_IN_USE) {
x0 = pb->ipacket[1] | (((pb->ipacket[4]) & 0x0f) << 8);
y0 = pb->ipacket[2] | (((pb->ipacket[4]) & 0xf0) << 4);
if (x0 & 0x800)
x0 -= 0x1000;
if (y0 & 0x800)
y0 -= 0x1000;
if (sc->flags & PSM_FLAGS_FINGERDOWN) {
*x = sc->xold - x0;
*y = y0 - sc->yold;
if (*x < 0) /* XXX */
++*x;
else if (*x)
--*x;
if (*y < 0)
++*y;
else if (*y)
--*y;
} else
sc->flags |= PSM_FLAGS_FINGERDOWN;
sc->xold = x0;
sc->yold = y0;
} else
sc->flags &= ~PSM_FLAGS_FINGERDOWN;
}
static void
psmsoftintridle(void *arg)
{
struct psm_softc *sc = arg;
packetbuf_t *pb;
/* Invoke soft handler only when pqueue is empty. Otherwise it will be
* invoked from psmintr soon with pqueue filled with real data */
if (sc->pqueue_start == sc->pqueue_end &&
sc->idlepacket.inputbytes > 0) {
/* Grow circular queue backwards to avoid race with psmintr */
if (--sc->pqueue_start < 0)
sc->pqueue_start = PSM_PACKETQUEUE - 1;
pb = &sc->pqueue[sc->pqueue_start];
memcpy(pb, &sc->idlepacket, sizeof(packetbuf_t));
VLOG(4, (LOG_DEBUG,
"psmsoftintridle: %02x %02x %02x %02x %02x %02x\n",
pb->ipacket[0], pb->ipacket[1], pb->ipacket[2],
pb->ipacket[3], pb->ipacket[4], pb->ipacket[5]));
psmsoftintr(arg);
}
}
static void
psmsoftintr(void *arg)
{
/*
* the table to turn PS/2 mouse button bits (MOUSE_PS2_BUTTON?DOWN)
* into `mousestatus' button bits (MOUSE_BUTTON?DOWN).
*/
static int butmap[8] = {
0,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
};
struct psm_softc *sc = arg;
mousestatus_t ms;
packetbuf_t *pb;
int x, y, z, c, l, s;
getmicrouptime(&sc->lastsoftintr);
s = spltty();
do {
pb = &sc->pqueue[sc->pqueue_start];
if (sc->mode.level == PSM_LEVEL_NATIVE)
goto next_native;
c = pb->ipacket[0];
/*
* A kludge for Kensington device!
* The MSB of the horizontal count appears to be stored in
* a strange place.
*/
if (sc->hw.model == MOUSE_MODEL_THINK)
pb->ipacket[1] |= (c & MOUSE_PS2_XOVERFLOW) ? 0x80 : 0;
/* ignore the overflow bits... */
x = (c & MOUSE_PS2_XNEG) ?
pb->ipacket[1] - 256 : pb->ipacket[1];
y = (c & MOUSE_PS2_YNEG) ?
pb->ipacket[2] - 256 : pb->ipacket[2];
z = 0;
ms.obutton = sc->button; /* previous button state */
ms.button = butmap[c & MOUSE_PS2_BUTTONS];
/* `tapping' action */
if (sc->config & PSM_CONFIG_FORCETAP)
ms.button |= ((c & MOUSE_PS2_TAP)) ?
0 : MOUSE_BUTTON4DOWN;
timevalclear(&sc->idletimeout);
sc->idlepacket.inputbytes = 0;
switch (sc->hw.model) {
case MOUSE_MODEL_EXPLORER:
/*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: oy ox sy sx 1 M R L
* byte 2: x x x x x x x x
* byte 3: y y y y y y y y
* byte 4: * * S2 S1 s d2 d1 d0
*
* L, M, R, S1, S2: left, middle, right and side buttons
* s: wheel data sign bit
* d2-d0: wheel data
*/
z = (pb->ipacket[3] & MOUSE_EXPLORER_ZNEG) ?
(pb->ipacket[3] & 0x0f) - 16 :
(pb->ipacket[3] & 0x0f);
ms.button |=
(pb->ipacket[3] & MOUSE_EXPLORER_BUTTON4DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms.button |=
(pb->ipacket[3] & MOUSE_EXPLORER_BUTTON5DOWN) ?
MOUSE_BUTTON5DOWN : 0;
break;
case MOUSE_MODEL_INTELLI:
case MOUSE_MODEL_NET:
/* wheel data is in the fourth byte */
z = (char)pb->ipacket[3];
/*
* XXX some mice may send 7 when there is no Z movement? */
if ((z >= 7) || (z <= -7))
z = 0;
/* some compatible mice have additional buttons */
ms.button |= (c & MOUSE_PS2INTELLI_BUTTON4DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms.button |= (c & MOUSE_PS2INTELLI_BUTTON5DOWN) ?
MOUSE_BUTTON5DOWN : 0;
break;
case MOUSE_MODEL_MOUSEMANPLUS:
proc_mmanplus(sc, pb, &ms, &x, &y, &z);
break;
case MOUSE_MODEL_GLIDEPOINT:
/* `tapping' action */
ms.button |= ((c & MOUSE_PS2_TAP)) ? 0 :
MOUSE_BUTTON4DOWN;
break;
case MOUSE_MODEL_NETSCROLL:
/*
* three additional bytes encode buttons and
* wheel events
*/
ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON3DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON1DOWN) ?
MOUSE_BUTTON5DOWN : 0;
z = (pb->ipacket[3] & MOUSE_PS2_XNEG) ?
pb->ipacket[4] - 256 : pb->ipacket[4];
break;
case MOUSE_MODEL_THINK:
/* the fourth button state in the first byte */
ms.button |= (c & MOUSE_PS2_TAP) ?
MOUSE_BUTTON4DOWN : 0;
break;
case MOUSE_MODEL_VERSAPAD:
proc_versapad(sc, pb, &ms, &x, &y, &z);
c = ((x < 0) ? MOUSE_PS2_XNEG : 0) |
((y < 0) ? MOUSE_PS2_YNEG : 0);
break;
case MOUSE_MODEL_4D:
/*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: s2 d2 s1 d1 1 M R L
* byte 2: sx x x x x x x x
* byte 3: sy y y y y y y y
*
* s1: wheel 1 direction
* d1: wheel 1 data
* s2: wheel 2 direction
* d2: wheel 2 data
*/
x = (pb->ipacket[1] & 0x80) ?
pb->ipacket[1] - 256 : pb->ipacket[1];
y = (pb->ipacket[2] & 0x80) ?
pb->ipacket[2] - 256 : pb->ipacket[2];
switch (c & MOUSE_4D_WHEELBITS) {
case 0x10:
z = 1;
break;
case 0x30:
z = -1;
break;
case 0x40: /* XXX 2nd wheel turning right */
z = 2;
break;
case 0xc0: /* XXX 2nd wheel turning left */
z = -2;
break;
}
break;
case MOUSE_MODEL_4DPLUS:
if ((x < 16 - 256) && (y < 16 - 256)) {
/*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: 0 0 1 1 1 M R L
* byte 2: 0 0 0 0 1 0 0 0
* byte 3: 0 0 0 0 S s d1 d0
*
* L, M, R, S: left, middle, right,
* and side buttons
* s: wheel data sign bit
* d1-d0: wheel data
*/
x = y = 0;
if (pb->ipacket[2] & MOUSE_4DPLUS_BUTTON4DOWN)
ms.button |= MOUSE_BUTTON4DOWN;
z = (pb->ipacket[2] & MOUSE_4DPLUS_ZNEG) ?
((pb->ipacket[2] & 0x07) - 8) :
(pb->ipacket[2] & 0x07) ;
} else {
/* preserve previous button states */
ms.button |= ms.obutton & MOUSE_EXTBUTTONS;
}
break;
case MOUSE_MODEL_SYNAPTICS:
if (proc_synaptics(sc, pb, &ms, &x, &y, &z) != 0)
goto next;
break;
case MOUSE_MODEL_ELANTECH:
if (proc_elantech(sc, pb, &ms, &x, &y, &z) != 0)
goto next;
break;
case MOUSE_MODEL_TRACKPOINT:
case MOUSE_MODEL_GENERIC:
default:
break;
}
/* scale values */
if (sc->mode.accelfactor >= 1) {
if (x != 0) {
x = x * x / sc->mode.accelfactor;
if (x == 0)
x = 1;
if (c & MOUSE_PS2_XNEG)
x = -x;
}
if (y != 0) {
y = y * y / sc->mode.accelfactor;
if (y == 0)
y = 1;
if (c & MOUSE_PS2_YNEG)
y = -y;
}
}
/* Store last packet for reinjection if it has not been set already */
if (timevalisset(&sc->idletimeout) && sc->idlepacket.inputbytes == 0)
sc->idlepacket = *pb;
ms.dx = x;
ms.dy = y;
ms.dz = z;
ms.flags = ((x || y || z) ? MOUSE_POSCHANGED : 0) |
(ms.obutton ^ ms.button);
pb->inputbytes = tame_mouse(sc, pb, &ms, pb->ipacket);
sc->status.flags |= ms.flags;
sc->status.dx += ms.dx;
sc->status.dy += ms.dy;
sc->status.dz += ms.dz;
sc->status.button = ms.button;
sc->button = ms.button;
next_native:
sc->watchdog = FALSE;
/* queue data */
if (sc->queue.count + pb->inputbytes < sizeof(sc->queue.buf)) {
l = imin(pb->inputbytes,
sizeof(sc->queue.buf) - sc->queue.tail);
bcopy(&pb->ipacket[0], &sc->queue.buf[sc->queue.tail], l);
if (pb->inputbytes > l)
bcopy(&pb->ipacket[l], &sc->queue.buf[0],
pb->inputbytes - l);
sc->queue.tail = (sc->queue.tail + pb->inputbytes) %
sizeof(sc->queue.buf);
sc->queue.count += pb->inputbytes;
}
pb->inputbytes = 0;
next:
if (++sc->pqueue_start >= PSM_PACKETQUEUE)
sc->pqueue_start = 0;
} while (sc->pqueue_start != sc->pqueue_end);
if (sc->state & PSM_ASLP) {
sc->state &= ~PSM_ASLP;
wakeup(sc);
}
selwakeuppri(&sc->rsel, PZERO);
if (sc->async != NULL) {
pgsigio(&sc->async, SIGIO, 0);
}
sc->state &= ~PSM_SOFTARMED;
/* schedule injection of predefined packet after idletimeout
* if no data packets have been received from psmintr */
if (timevalisset(&sc->idletimeout)) {
sc->state |= PSM_SOFTARMED;
callout_reset(&sc->softcallout, tvtohz(&sc->idletimeout),
psmsoftintridle, sc);
VLOG(2, (LOG_DEBUG, "softintr: callout set: %d ticks\n",
tvtohz(&sc->idletimeout)));
}
splx(s);
}
static int
psmpoll(struct cdev *dev, int events, struct thread *td)
{
struct psm_softc *sc = dev->si_drv1;
int s;
int revents = 0;
/* Return true if a mouse event available */
s = spltty();
if (events & (POLLIN | POLLRDNORM)) {
if (sc->queue.count > 0)
revents |= events & (POLLIN | POLLRDNORM);
else
selrecord(td, &sc->rsel);
}
splx(s);
return (revents);
}
/* vendor/model specific routines */
static int mouse_id_proc1(KBDC kbdc, int res, int scale, int *status)
{
if (set_mouse_resolution(kbdc, res) != res)
return (FALSE);
if (set_mouse_scaling(kbdc, scale) &&
set_mouse_scaling(kbdc, scale) &&
set_mouse_scaling(kbdc, scale) &&
(get_mouse_status(kbdc, status, 0, 3) >= 3))
return (TRUE);
return (FALSE);
}
static int
mouse_ext_command(KBDC kbdc, int command)
{
int c;
c = (command >> 6) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
c = (command >> 4) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
c = (command >> 2) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
c = (command >> 0) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
return (TRUE);
}
#ifdef notyet
/* Logitech MouseMan Cordless II */
static int
enable_lcordless(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int status[3];
int ch;
if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 2, status))
return (FALSE);
if (status[1] == PSMD_RES_HIGH)
return (FALSE);
ch = (status[0] & 0x07) - 1; /* channel # */
if ((ch <= 0) || (ch > 4))
return (FALSE);
/*
* status[1]: always one?
* status[2]: battery status? (0-100)
*/
return (TRUE);
}
#endif /* notyet */
/* Genius NetScroll Mouse, MouseSystems SmartScroll Mouse */
static int
enable_groller(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int status[3];
/*
* The special sequence to enable the fourth button and the
* roller. Immediately after this sequence check status bytes.
* if the mouse is NetScroll, the second and the third bytes are
* '3' and 'D'.
*/
/*
* If the mouse is an ordinary PS/2 mouse, the status bytes should
* look like the following.
*
* byte 1 bit 7 always 0
* bit 6 stream mode (0)
* bit 5 disabled (0)
* bit 4 1:1 scaling (0)
* bit 3 always 0
* bit 0-2 button status
* byte 2 resolution (PSMD_RES_HIGH)
* byte 3 report rate (?)
*/
if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status))
return (FALSE);
if ((status[1] != '3') || (status[2] != 'D'))
return (FALSE);
/* FIXME: SmartScroll Mouse has 5 buttons! XXX */
if (arg == PROBE)
sc->hw.buttons = 4;
return (TRUE);
}
/* Genius NetMouse/NetMouse Pro, ASCII Mie Mouse, NetScroll Optical */
static int
enable_gmouse(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int status[3];
/*
* The special sequence to enable the middle, "rubber" button.
* Immediately after this sequence check status bytes.
* if the mouse is NetMouse, NetMouse Pro, or ASCII MIE Mouse,
* the second and the third bytes are '3' and 'U'.
* NOTE: NetMouse reports that it has three buttons although it has
* two buttons and a rubber button. NetMouse Pro and MIE Mouse
* say they have three buttons too and they do have a button on the
* side...
*/
if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status))
return (FALSE);
if ((status[1] != '3') || (status[2] != 'U'))
return (FALSE);
return (TRUE);
}
/* ALPS GlidePoint */
static int
enable_aglide(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int status[3];
/*
* The special sequence to obtain ALPS GlidePoint specific
* information. Immediately after this sequence, status bytes will
* contain something interesting.
* NOTE: ALPS produces several models of GlidePoint. Some of those
* do not respond to this sequence, thus, cannot be detected this way.
*/
if (set_mouse_sampling_rate(kbdc, 100) != 100)
return (FALSE);
if (!mouse_id_proc1(kbdc, PSMD_RES_LOW, 2, status))
return (FALSE);
if ((status[1] == PSMD_RES_LOW) || (status[2] == 100))
return (FALSE);
return (TRUE);
}
/* Kensington ThinkingMouse/Trackball */
static int
enable_kmouse(struct psm_softc *sc, enum probearg arg)
{
static u_char rate[] = { 20, 60, 40, 20, 20, 60, 40, 20, 20 };
KBDC kbdc = sc->kbdc;
int status[3];
int id1;
int id2;
int i;
id1 = get_aux_id(kbdc);
if (set_mouse_sampling_rate(kbdc, 10) != 10)
return (FALSE);
/*
* The device is now in the native mode? It returns a different
* ID value...
*/
id2 = get_aux_id(kbdc);
if ((id1 == id2) || (id2 != 2))
return (FALSE);
if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
return (FALSE);
#if PSM_DEBUG >= 2
/* at this point, resolution is LOW, sampling rate is 10/sec */
if (get_mouse_status(kbdc, status, 0, 3) < 3)
return (FALSE);
#endif
/*
* The special sequence to enable the third and fourth buttons.
* Otherwise they behave like the first and second buttons.
*/
for (i = 0; i < nitems(rate); ++i)
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
/*
* At this point, the device is using default resolution and
* sampling rate for the native mode.
*/
if (get_mouse_status(kbdc, status, 0, 3) < 3)
return (FALSE);
if ((status[1] == PSMD_RES_LOW) || (status[2] == rate[i - 1]))
return (FALSE);
/* the device appears be enabled by this sequence, diable it for now */
disable_aux_dev(kbdc);
empty_aux_buffer(kbdc, 5);
return (TRUE);
}
/* Logitech MouseMan+/FirstMouse+, IBM ScrollPoint Mouse */
static int
enable_mmanplus(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int data[3];
/* the special sequence to enable the fourth button and the roller. */
/*
* NOTE: for ScrollPoint to respond correctly, the SET_RESOLUTION
* must be called exactly three times since the last RESET command
* before this sequence. XXX
*/
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (!mouse_ext_command(kbdc, 0x39) || !mouse_ext_command(kbdc, 0xdb))
return (FALSE);
if (get_mouse_status(kbdc, data, 1, 3) < 3)
return (FALSE);
/*
* PS2++ protocol, packet type 0
*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: * 1 p3 p2 1 * * *
* byte 2: 1 1 p1 p0 m1 m0 1 0
* byte 3: m7 m6 m5 m4 m3 m2 m1 m0
*
* p3-p0: packet type: 0
* m7-m0: model ID: MouseMan+:0x50,
* FirstMouse+:0x51,
* ScrollPoint:0x58...
*/
/* check constant bits */
if ((data[0] & MOUSE_PS2PLUS_SYNCMASK) != MOUSE_PS2PLUS_SYNC)
return (FALSE);
if ((data[1] & 0xc3) != 0xc2)
return (FALSE);
/* check d3-d0 in byte 2 */
if (!MOUSE_PS2PLUS_CHECKBITS(data))
return (FALSE);
/* check p3-p0 */
if (MOUSE_PS2PLUS_PACKET_TYPE(data) != 0)
return (FALSE);
if (arg == PROBE) {
sc->hw.hwid &= 0x00ff;
sc->hw.hwid |= data[2] << 8; /* save model ID */
}
/*
* MouseMan+ (or FirstMouse+) is now in its native mode, in which
* the wheel and the fourth button events are encoded in the
* special data packet. The mouse may be put in the IntelliMouse mode
* if it is initialized by the IntelliMouse's method.
*/
return (TRUE);
}
/* MS IntelliMouse Explorer */
static int
enable_msexplorer(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
static u_char rate0[] = { 200, 100, 80, };
static u_char rate1[] = { 200, 200, 80, };
int id;
int i;
/*
* This is needed for at least A4Tech X-7xx mice - they do not go
* straight to Explorer mode, but need to be set to Intelli mode
* first.
*/
enable_msintelli(sc, arg);
/* the special sequence to enable the extra buttons and the roller. */
for (i = 0; i < nitems(rate1); ++i)
if (set_mouse_sampling_rate(kbdc, rate1[i]) != rate1[i])
return (FALSE);
/* the device will give the genuine ID only after the above sequence */
id = get_aux_id(kbdc);
if (id != PSM_EXPLORER_ID)
return (FALSE);
if (arg == PROBE) {
sc->hw.buttons = 5; /* IntelliMouse Explorer XXX */
sc->hw.hwid = id;
}
/*
* XXX: this is a kludge to fool some KVM switch products
* which think they are clever enough to know the 4-byte IntelliMouse
* protocol, and assume any other protocols use 3-byte packets.
* They don't convey 4-byte data packets from the IntelliMouse Explorer
* correctly to the host computer because of this!
* The following sequence is actually IntelliMouse's "wake up"
* sequence; it will make the KVM think the mouse is IntelliMouse
* when it is in fact IntelliMouse Explorer.
*/
for (i = 0; i < nitems(rate0); ++i)
if (set_mouse_sampling_rate(kbdc, rate0[i]) != rate0[i])
break;
get_aux_id(kbdc);
return (TRUE);
}
/*
* MS IntelliMouse
* Logitech MouseMan+ and FirstMouse+ will also respond to this
* probe routine and act like IntelliMouse.
*/
static int
enable_msintelli(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
static u_char rate[] = { 200, 100, 80, };
int id;
int i;
/* the special sequence to enable the third button and the roller. */
for (i = 0; i < nitems(rate); ++i)
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
/* the device will give the genuine ID only after the above sequence */
id = get_aux_id(kbdc);
if (id != PSM_INTELLI_ID)
return (FALSE);
if (arg == PROBE) {
sc->hw.buttons = 3;
sc->hw.hwid = id;
}
return (TRUE);
}
/*
* A4 Tech 4D Mouse
* Newer wheel mice from A4 Tech may use the 4D+ protocol.
*/
static int
enable_4dmouse(struct psm_softc *sc, enum probearg arg)
{
static u_char rate[] = { 200, 100, 80, 60, 40, 20 };
KBDC kbdc = sc->kbdc;
int id;
int i;
for (i = 0; i < nitems(rate); ++i)
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
id = get_aux_id(kbdc);
/*
* WinEasy 4D, 4 Way Scroll 4D: 6
* Cable-Free 4D: 8 (4DPLUS)
* WinBest 4D+, 4 Way Scroll 4D+: 8 (4DPLUS)
*/
if (id != PSM_4DMOUSE_ID)
return (FALSE);
if (arg == PROBE) {
sc->hw.buttons = 3; /* XXX some 4D mice have 4? */
sc->hw.hwid = id;
}
return (TRUE);
}
/*
* A4 Tech 4D+ Mouse
* Newer wheel mice from A4 Tech seem to use this protocol.
* Older models are recognized as either 4D Mouse or IntelliMouse.
*/
static int
enable_4dplus(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int id;
/*
* enable_4dmouse() already issued the following ID sequence...
static u_char rate[] = { 200, 100, 80, 60, 40, 20 };
int i;
for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i)
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
*/
id = get_aux_id(kbdc);
switch (id) {
case PSM_4DPLUS_ID:
break;
case PSM_4DPLUS_RFSW35_ID:
break;
default:
return (FALSE);
}
if (arg == PROBE) {
sc->hw.buttons = (id == PSM_4DPLUS_ID) ? 4 : 3;
sc->hw.hwid = id;
}
return (TRUE);
}
/* Synaptics Touchpad */
static int
synaptics_sysctl(SYSCTL_HANDLER_ARGS)
{
struct psm_softc *sc;
int error, arg;
if (oidp->oid_arg1 == NULL || oidp->oid_arg2 < 0 ||
oidp->oid_arg2 > SYNAPTICS_SYSCTL_SOFTBUTTON3_X)
return (EINVAL);
sc = oidp->oid_arg1;
/* Read the current value. */
arg = *(int *)((char *)sc + oidp->oid_arg2);
error = sysctl_handle_int(oidp, &arg, 0, req);
/* Sanity check. */
if (error || !req->newptr)
return (error);
/*
* Check that the new value is in the concerned node's range
* of values.
*/
switch (oidp->oid_arg2) {
case SYNAPTICS_SYSCTL_MIN_PRESSURE:
case SYNAPTICS_SYSCTL_MAX_PRESSURE:
if (arg < 0 || arg > 255)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_MAX_WIDTH:
if (arg < 4 || arg > 15)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_MARGIN_TOP:
case SYNAPTICS_SYSCTL_MARGIN_BOTTOM:
case SYNAPTICS_SYSCTL_NA_TOP:
case SYNAPTICS_SYSCTL_NA_BOTTOM:
if (arg < 0 || arg > sc->synhw.maximumYCoord)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_SOFTBUTTON2_X:
case SYNAPTICS_SYSCTL_SOFTBUTTON3_X:
/* Softbuttons is clickpad only feature */
if (!sc->synhw.capClickPad && arg != 0)
return (EINVAL);
/* FALLTHROUGH */
case SYNAPTICS_SYSCTL_MARGIN_RIGHT:
case SYNAPTICS_SYSCTL_MARGIN_LEFT:
case SYNAPTICS_SYSCTL_NA_RIGHT:
case SYNAPTICS_SYSCTL_NA_LEFT:
if (arg < 0 || arg > sc->synhw.maximumXCoord)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_WINDOW_MIN:
case SYNAPTICS_SYSCTL_WINDOW_MAX:
case SYNAPTICS_SYSCTL_TAP_MIN_QUEUE:
if (arg < 1 || arg > SYNAPTICS_PACKETQUEUE)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_MULTIPLICATOR:
case SYNAPTICS_SYSCTL_WEIGHT_CURRENT:
case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS:
case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA:
case SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED:
case SYNAPTICS_SYSCTL_DIV_MIN:
case SYNAPTICS_SYSCTL_DIV_MAX:
case SYNAPTICS_SYSCTL_DIV_MAX_NA:
case SYNAPTICS_SYSCTL_DIV_LEN:
case SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN:
case SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX:
if (arg < 1)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_TAP_MAX_DELTA:
case SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT:
case SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA:
if (arg < 0)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA:
if (arg < -sc->synhw.maximumXCoord ||
arg > sc->synhw.maximumXCoord)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_SOFTBUTTONS_Y:
/* Softbuttons is clickpad only feature */
if (!sc->synhw.capClickPad && arg != 0)
return (EINVAL);
/* FALLTHROUGH */
case SYNAPTICS_SYSCTL_VSCROLL_VER_AREA:
if (arg < -sc->synhw.maximumYCoord ||
arg > sc->synhw.maximumYCoord)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_TOUCHPAD_OFF:
if (arg < 0 || arg > 1)
return (EINVAL);
break;
default:
return (EINVAL);
}
/* Update. */
*(int *)((char *)sc + oidp->oid_arg2) = arg;
return (error);
}
static void
synaptics_sysctl_create_softbuttons_tree(struct psm_softc *sc)
{
/*
* Set predefined sizes for softbuttons.
* Values are taken to match HP Pavilion dv6 clickpad drawings
* with thin middle softbutton placed on separator
*/
/* hw.psm.synaptics.softbuttons_y */
sc->syninfo.softbuttons_y = 1700;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"softbuttons_y", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_SOFTBUTTONS_Y,
synaptics_sysctl, "I",
"Vertical size of softbuttons area");
/* hw.psm.synaptics.softbutton2_x */
sc->syninfo.softbutton2_x = 3100;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"softbutton2_x", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_SOFTBUTTON2_X,
synaptics_sysctl, "I",
"Horisontal position of 2-nd softbutton left edge (0-disable)");
/* hw.psm.synaptics.softbutton3_x */
sc->syninfo.softbutton3_x = 3900;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"softbutton3_x", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_SOFTBUTTON3_X,
synaptics_sysctl, "I",
"Horisontal position of 3-rd softbutton left edge (0-disable)");
}
static void
synaptics_sysctl_create_tree(struct psm_softc *sc, const char *name,
const char *descr)
{
if (sc->syninfo.sysctl_tree != NULL)
return;
/* Attach extra synaptics sysctl nodes under hw.psm.synaptics */
sysctl_ctx_init(&sc->syninfo.sysctl_ctx);
sc->syninfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->syninfo.sysctl_ctx,
SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, name, CTLFLAG_RD,
0, descr);
/* hw.psm.synaptics.directional_scrolls. */
sc->syninfo.directional_scrolls = 0;
SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"directional_scrolls", CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.directional_scrolls, 0,
"Enable hardware scrolling pad (if non-zero) or register it as "
"extended buttons (if 0)");
/* hw.psm.synaptics.max_x. */
sc->syninfo.max_x = 6143;
SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"max_x", CTLFLAG_RD|CTLFLAG_ANYBODY,
&sc->syninfo.max_x, 0,
"Horizontal reporting range");
/* hw.psm.synaptics.max_y. */
sc->syninfo.max_y = 6143;
SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"max_y", CTLFLAG_RD|CTLFLAG_ANYBODY,
&sc->syninfo.max_y, 0,
"Vertical reporting range");
/*
* Turn off two finger scroll if we have a
* physical area reserved for scrolling or when
* there's no multi finger support.
*/
if (sc->synhw.verticalScroll || (sc->synhw.capMultiFinger == 0 &&
sc->synhw.capAdvancedGestures == 0))
sc->syninfo.two_finger_scroll = 0;
else
sc->syninfo.two_finger_scroll = 1;
/* hw.psm.synaptics.two_finger_scroll. */
SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"two_finger_scroll", CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.two_finger_scroll, 0,
"Enable two finger scrolling");
/* hw.psm.synaptics.min_pressure. */
sc->syninfo.min_pressure = 16;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"min_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MIN_PRESSURE,
synaptics_sysctl, "I",
"Minimum pressure required to start an action");
/* hw.psm.synaptics.max_pressure. */
sc->syninfo.max_pressure = 220;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"max_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MAX_PRESSURE,
synaptics_sysctl, "I",
"Maximum pressure to detect palm");
/* hw.psm.synaptics.max_width. */
sc->syninfo.max_width = 10;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"max_width", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MAX_WIDTH,
synaptics_sysctl, "I",
"Maximum finger width to detect palm");
/* hw.psm.synaptics.top_margin. */
sc->syninfo.margin_top = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MARGIN_TOP,
synaptics_sysctl, "I",
"Top margin");
/* hw.psm.synaptics.right_margin. */
sc->syninfo.margin_right = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MARGIN_RIGHT,
synaptics_sysctl, "I",
"Right margin");
/* hw.psm.synaptics.bottom_margin. */
sc->syninfo.margin_bottom = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MARGIN_BOTTOM,
synaptics_sysctl, "I",
"Bottom margin");
/* hw.psm.synaptics.left_margin. */
sc->syninfo.margin_left = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MARGIN_LEFT,
synaptics_sysctl, "I",
"Left margin");
/* hw.psm.synaptics.na_top. */
sc->syninfo.na_top = 1783;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_NA_TOP,
synaptics_sysctl, "I",
"Top noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.na_right. */
sc->syninfo.na_right = 563;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_NA_RIGHT,
synaptics_sysctl, "I",
"Right noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.na_bottom. */
sc->syninfo.na_bottom = 1408;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_NA_BOTTOM,
synaptics_sysctl, "I",
"Bottom noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.na_left. */
sc->syninfo.na_left = 1600;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_NA_LEFT,
synaptics_sysctl, "I",
"Left noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.window_min. */
sc->syninfo.window_min = 4;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"window_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_WINDOW_MIN,
synaptics_sysctl, "I",
"Minimum window size to start an action");
/* hw.psm.synaptics.window_max. */
sc->syninfo.window_max = 10;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"window_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_WINDOW_MAX,
synaptics_sysctl, "I",
"Maximum window size");
/* hw.psm.synaptics.multiplicator. */
sc->syninfo.multiplicator = 10000;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"multiplicator", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MULTIPLICATOR,
synaptics_sysctl, "I",
"Multiplicator to increase precision in averages and divisions");
/* hw.psm.synaptics.weight_current. */
sc->syninfo.weight_current = 3;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_current", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_WEIGHT_CURRENT,
synaptics_sysctl, "I",
"Weight of the current movement in the new average");
/* hw.psm.synaptics.weight_previous. */
sc->syninfo.weight_previous = 6;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_previous", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS,
synaptics_sysctl, "I",
"Weight of the previous average");
/* hw.psm.synaptics.weight_previous_na. */
sc->syninfo.weight_previous_na = 20;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_previous_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA,
synaptics_sysctl, "I",
"Weight of the previous average (inside the noisy area)");
/* hw.psm.synaptics.weight_len_squared. */
sc->syninfo.weight_len_squared = 2000;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_len_squared", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED,
synaptics_sysctl, "I",
"Length (squared) of segments where weight_previous "
"starts to decrease");
/* hw.psm.synaptics.div_min. */
sc->syninfo.div_min = 9;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_DIV_MIN,
synaptics_sysctl, "I",
"Divisor for fast movements");
/* hw.psm.synaptics.div_max. */
sc->syninfo.div_max = 17;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_DIV_MAX,
synaptics_sysctl, "I",
"Divisor for slow movements");
/* hw.psm.synaptics.div_max_na. */
sc->syninfo.div_max_na = 30;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_max_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_DIV_MAX_NA,
synaptics_sysctl, "I",
"Divisor with slow movements (inside the noisy area)");
/* hw.psm.synaptics.div_len. */
sc->syninfo.div_len = 100;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_len", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_DIV_LEN,
synaptics_sysctl, "I",
"Length of segments where div_max starts to decrease");
/* hw.psm.synaptics.tap_max_delta. */
sc->syninfo.tap_max_delta = 80;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"tap_max_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_TAP_MAX_DELTA,
synaptics_sysctl, "I",
"Length of segments above which a tap is ignored");
/* hw.psm.synaptics.tap_min_queue. */
sc->syninfo.tap_min_queue = 2;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"tap_min_queue", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_TAP_MIN_QUEUE,
synaptics_sysctl, "I",
"Number of packets required to consider a tap");
/* hw.psm.synaptics.taphold_timeout. */
sc->gesture.in_taphold = 0;
sc->syninfo.taphold_timeout = tap_timeout;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"taphold_timeout", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT,
synaptics_sysctl, "I",
"Maximum elapsed time between two taps to consider a tap-hold "
"action");
/* hw.psm.synaptics.vscroll_hor_area. */
sc->syninfo.vscroll_hor_area = 0; /* 1300 */
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_hor_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA,
synaptics_sysctl, "I",
"Area reserved for horizontal virtual scrolling");
/* hw.psm.synaptics.vscroll_ver_area. */
sc->syninfo.vscroll_ver_area = -400 - sc->syninfo.margin_right;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_ver_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_VSCROLL_VER_AREA,
synaptics_sysctl, "I",
"Area reserved for vertical virtual scrolling");
/* hw.psm.synaptics.vscroll_min_delta. */
sc->syninfo.vscroll_min_delta = 50;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_min_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA,
synaptics_sysctl, "I",
"Minimum movement to consider virtual scrolling");
/* hw.psm.synaptics.vscroll_div_min. */
sc->syninfo.vscroll_div_min = 100;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN,
synaptics_sysctl, "I",
"Divisor for fast scrolling");
/* hw.psm.synaptics.vscroll_div_min. */
sc->syninfo.vscroll_div_max = 150;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX,
synaptics_sysctl, "I",
"Divisor for slow scrolling");
/* hw.psm.synaptics.touchpad_off. */
sc->syninfo.touchpad_off = 0;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"touchpad_off", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_TOUCHPAD_OFF,
synaptics_sysctl, "I",
"Turn off touchpad");
sc->syninfo.softbuttons_y = 0;
sc->syninfo.softbutton2_x = 0;
sc->syninfo.softbutton3_x = 0;
/* skip softbuttons sysctl on not clickpads */
if (sc->synhw.capClickPad)
synaptics_sysctl_create_softbuttons_tree(sc);
}
static int
synaptics_preferred_mode(struct psm_softc *sc) {
int mode_byte;
/* Check if we are in relative mode */
if (sc->hw.model != MOUSE_MODEL_SYNAPTICS) {
if (tap_enabled == 0)
/*
* Disable tap & drag gestures. We use a Mode Byte
* and set the DisGest bit (see §2.5 of Synaptics
* TouchPad Interfacing Guide).
*/
return (0x04);
else
/*
* Enable tap & drag gestures. We use a Mode Byte
* and clear the DisGest bit (see §2.5 of Synaptics
* TouchPad Interfacing Guide).
*/
return (0x00);
}
mode_byte = 0xc4;
/* request wmode where available */
if (sc->synhw.capExtended)
mode_byte |= 1;
return mode_byte;
}
static void
synaptics_set_mode(struct psm_softc *sc, int mode_byte) {
mouse_ext_command(sc->kbdc, mode_byte);
/* "Commit" the Set Mode Byte command sent above. */
set_mouse_sampling_rate(sc->kbdc, 20);
/*
* Enable advanced gestures mode if supported and we are not entering
* passthrough or relative mode.
*/
if ((sc->synhw.capAdvancedGestures || sc->synhw.capReportsV) &&
sc->hw.model == MOUSE_MODEL_SYNAPTICS && !(mode_byte & (1 << 5))) {
mouse_ext_command(sc->kbdc, 3);
set_mouse_sampling_rate(sc->kbdc, 0xc8);
}
}
static int
enable_synaptics(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
synapticshw_t synhw;
int status[3];
int buttons;
VLOG(3, (LOG_DEBUG, "synaptics: BEGIN init\n"));
/*
* Just to be on the safe side: this avoids troubles with
* following mouse_ext_command() when the previous command
* was PSMC_SET_RESOLUTION. Set Scaling has no effect on
* Synaptics Touchpad behaviour.
*/
set_mouse_scaling(kbdc, 1);
/* Identify the Touchpad version. */
if (mouse_ext_command(kbdc, 0) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if (status[1] != 0x47)
return (FALSE);
bzero(&synhw, sizeof(synhw));
synhw.infoMinor = status[0];
synhw.infoMajor = status[2] & 0x0f;
if (verbose >= 2)
printf("Synaptics Touchpad v%d.%d\n", synhw.infoMajor,
synhw.infoMinor);
if (synhw.infoMajor < 4) {
printf(" Unsupported (pre-v4) Touchpad detected\n");
return (FALSE);
}
/* Get the Touchpad model information. */
if (mouse_ext_command(kbdc, 3) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if ((status[1] & 0x01) != 0) {
printf(" Failed to read model information\n");
return (FALSE);
}
synhw.infoRot180 = (status[0] & 0x80) != 0;
synhw.infoPortrait = (status[0] & 0x40) != 0;
synhw.infoSensor = status[0] & 0x3f;
synhw.infoHardware = (status[1] & 0xfe) >> 1;
synhw.infoNewAbs = (status[2] & 0x80) != 0;
synhw.capPen = (status[2] & 0x40) != 0;
synhw.infoSimplC = (status[2] & 0x20) != 0;
synhw.infoGeometry = status[2] & 0x0f;
if (verbose >= 2) {
printf(" Model information:\n");
printf(" infoRot180: %d\n", synhw.infoRot180);
printf(" infoPortrait: %d\n", synhw.infoPortrait);
printf(" infoSensor: %d\n", synhw.infoSensor);
printf(" infoHardware: %d\n", synhw.infoHardware);
printf(" infoNewAbs: %d\n", synhw.infoNewAbs);
printf(" capPen: %d\n", synhw.capPen);
printf(" infoSimplC: %d\n", synhw.infoSimplC);
printf(" infoGeometry: %d\n", synhw.infoGeometry);
}
/* Read the extended capability bits. */
if (mouse_ext_command(kbdc, 2) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) {
printf(" Failed to read extended capability bits\n");
return (FALSE);
}
/* Set the different capabilities when they exist. */
buttons = 0;
synhw.capExtended = (status[0] & 0x80) != 0;
if (synhw.capExtended) {
synhw.nExtendedQueries = (status[0] & 0x70) >> 4;
synhw.capMiddle = (status[0] & 0x04) != 0;
synhw.capPassthrough = (status[2] & 0x80) != 0;
synhw.capLowPower = (status[2] & 0x40) != 0;
synhw.capMultiFingerReport =
(status[2] & 0x20) != 0;
synhw.capSleep = (status[2] & 0x10) != 0;
synhw.capFourButtons = (status[2] & 0x08) != 0;
synhw.capBallistics = (status[2] & 0x04) != 0;
synhw.capMultiFinger = (status[2] & 0x02) != 0;
synhw.capPalmDetect = (status[2] & 0x01) != 0;
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc, 0x08) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.infoXupmm = status[0];
synhw.infoYupmm = status[2];
if (verbose >= 2) {
printf(" Extended capabilities:\n");
printf(" capExtended: %d\n", synhw.capExtended);
printf(" capMiddle: %d\n", synhw.capMiddle);
printf(" nExtendedQueries: %d\n",
synhw.nExtendedQueries);
printf(" capPassthrough: %d\n", synhw.capPassthrough);
printf(" capLowPower: %d\n", synhw.capLowPower);
printf(" capMultiFingerReport: %d\n",
synhw.capMultiFingerReport);
printf(" capSleep: %d\n", synhw.capSleep);
printf(" capFourButtons: %d\n", synhw.capFourButtons);
printf(" capBallistics: %d\n", synhw.capBallistics);
printf(" capMultiFinger: %d\n", synhw.capMultiFinger);
printf(" capPalmDetect: %d\n", synhw.capPalmDetect);
printf(" infoXupmm: %d\n", synhw.infoXupmm);
printf(" infoYupmm: %d\n", synhw.infoYupmm);
}
/*
* If nExtendedQueries is 1 or greater, then the TouchPad
* supports this number of extended queries. We can load
* more information about buttons using query 0x09.
*/
if (synhw.nExtendedQueries >= 1) {
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc, 0x09) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.verticalScroll = (status[0] & 0x01) != 0;
synhw.horizontalScroll = (status[0] & 0x02) != 0;
synhw.verticalWheel = (status[0] & 0x08) != 0;
synhw.nExtendedButtons = (status[1] & 0xf0) >> 4;
synhw.capEWmode = (status[0] & 0x04) != 0;
if (verbose >= 2) {
printf(" Extended model ID:\n");
printf(" verticalScroll: %d\n",
synhw.verticalScroll);
printf(" horizontalScroll: %d\n",
synhw.horizontalScroll);
printf(" verticalWheel: %d\n",
synhw.verticalWheel);
printf(" nExtendedButtons: %d\n",
synhw.nExtendedButtons);
printf(" capEWmode: %d\n",
synhw.capEWmode);
}
/*
* Add the number of extended buttons to the total
* button support count, including the middle button
* if capMiddle support bit is set.
*/
buttons = synhw.nExtendedButtons + synhw.capMiddle;
} else
/*
* If the capFourButtons support bit is set,
* add a fourth button to the total button count.
*/
buttons = synhw.capFourButtons ? 1 : 0;
/* Read the continued capabilities bits. */
if (synhw.nExtendedQueries >= 4) {
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc, 0x0c) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.capClickPad = (status[1] & 0x01) << 1;
synhw.capClickPad |= (status[0] & 0x10) != 0;
synhw.capDeluxeLEDs = (status[1] & 0x02) != 0;
synhw.noAbsoluteFilter = (status[1] & 0x04) != 0;
synhw.capReportsV = (status[1] & 0x08) != 0;
synhw.capUniformClickPad = (status[1] & 0x10) != 0;
synhw.capReportsMin = (status[1] & 0x20) != 0;
synhw.capInterTouch = (status[1] & 0x40) != 0;
synhw.capReportsMax = (status[0] & 0x02) != 0;
synhw.capClearPad = (status[0] & 0x04) != 0;
synhw.capAdvancedGestures = (status[0] & 0x08) != 0;
synhw.capCoveredPad = (status[0] & 0x80) != 0;
if (synhw.capReportsMax) {
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc, 0x0d) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.maximumXCoord = (status[0] << 5) |
((status[1] & 0x0f) << 1);
synhw.maximumYCoord = (status[2] << 5) |
((status[1] & 0xf0) >> 3);
} else {
/*
* Typical bezel limits. Taken from 'Synaptics
* PS/2 * TouchPad Interfacing Guide' p.3.2.3.
*/
synhw.maximumXCoord = 5472;
synhw.maximumYCoord = 4448;
}
if (synhw.capReportsMin) {
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc, 0x0f) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.minimumXCoord = (status[0] << 5) |
((status[1] & 0x0f) << 1);
synhw.minimumYCoord = (status[2] << 5) |
((status[1] & 0xf0) >> 3);
} else {
/*
* Typical bezel limits. Taken from 'Synaptics
* PS/2 * TouchPad Interfacing Guide' p.3.2.3.
*/
synhw.minimumXCoord = 1472;
synhw.minimumYCoord = 1408;
}
if (verbose >= 2) {
printf(" Continued capabilities:\n");
printf(" capClickPad: %d\n",
synhw.capClickPad);
printf(" capDeluxeLEDs: %d\n",
synhw.capDeluxeLEDs);
printf(" noAbsoluteFilter: %d\n",
synhw.noAbsoluteFilter);
printf(" capReportsV: %d\n",
synhw.capReportsV);
printf(" capUniformClickPad: %d\n",
synhw.capUniformClickPad);
printf(" capReportsMin: %d\n",
synhw.capReportsMin);
printf(" capInterTouch: %d\n",
synhw.capInterTouch);
printf(" capReportsMax: %d\n",
synhw.capReportsMax);
printf(" capClearPad: %d\n",
synhw.capClearPad);
printf(" capAdvancedGestures: %d\n",
synhw.capAdvancedGestures);
printf(" capCoveredPad: %d\n",
synhw.capCoveredPad);
if (synhw.capReportsMax) {
printf(" maximumXCoord: %d\n",
synhw.maximumXCoord);
printf(" maximumYCoord: %d\n",
synhw.maximumYCoord);
}
if (synhw.capReportsMin) {
printf(" minimumXCoord: %d\n",
synhw.minimumXCoord);
printf(" minimumYCoord: %d\n",
synhw.minimumYCoord);
}
}
buttons += synhw.capClickPad;
}
}
if (verbose >= 2) {
if (synhw.capExtended)
printf(" Additional Buttons: %d\n", buttons);
else
printf(" No extended capabilities\n");
}
/*
* Add the default number of 3 buttons to the total
* count of supported buttons reported above.
*/
buttons += 3;
/*
* Read the mode byte.
*
* XXX: Note the Synaptics documentation also defines the first
* byte of the response to this query to be a constant 0x3b, this
* does not appear to be true for Touchpads with guest devices.
*/
if (mouse_ext_command(kbdc, 1) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) {
printf(" Failed to read mode byte\n");
return (FALSE);
}
if (arg == PROBE)
sc->synhw = synhw;
if (!synaptics_support)
return (FALSE);
/* Set mouse type just now for synaptics_set_mode() */
sc->hw.model = MOUSE_MODEL_SYNAPTICS;
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
if (trackpoint_support && synhw.capPassthrough) {
enable_trackpoint(sc, arg);
}
VLOG(3, (LOG_DEBUG, "synaptics: END init (%d buttons)\n", buttons));
if (arg == PROBE) {
/* Create sysctl tree. */
synaptics_sysctl_create_tree(sc, "synaptics",
"Synaptics TouchPad");
sc->hw.buttons = buttons;
}
return (TRUE);
}
static void
synaptics_passthrough_on(struct psm_softc *sc)
{
VLOG(2, (LOG_NOTICE, "psm: setting pass-through mode.\n"));
synaptics_set_mode(sc, synaptics_preferred_mode(sc) | (1 << 5));
}
static void
synaptics_passthrough_off(struct psm_softc *sc)
{
VLOG(2, (LOG_NOTICE, "psm: turning pass-through mode off.\n"));
set_mouse_scaling(sc->kbdc, 2);
set_mouse_scaling(sc->kbdc, 1);
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
}
/* IBM/Lenovo TrackPoint */
static int
trackpoint_command(struct psm_softc *sc, int cmd, int loc, int val)
{
const int seq[] = { 0xe2, cmd, loc, val };
int i;
if (sc->synhw.capPassthrough)
synaptics_passthrough_on(sc);
for (i = 0; i < nitems(seq); i++) {
if (sc->synhw.capPassthrough &&
(seq[i] == 0xff || seq[i] == 0xe7))
if (send_aux_command(sc->kbdc, 0xe7) != PSM_ACK) {
synaptics_passthrough_off(sc);
return (EIO);
}
if (send_aux_command(sc->kbdc, seq[i]) != PSM_ACK) {
if (sc->synhw.capPassthrough)
synaptics_passthrough_off(sc);
return (EIO);
}
}
if (sc->synhw.capPassthrough)
synaptics_passthrough_off(sc);
return (0);
}
#define PSM_TPINFO(x) offsetof(struct psm_softc, tpinfo.x)
#define TPMASK 0
#define TPLOC 1
#define TPINFO 2
static int
trackpoint_sysctl(SYSCTL_HANDLER_ARGS)
{
static const int data[][3] = {
{ 0x00, 0x4a, PSM_TPINFO(sensitivity) },
{ 0x00, 0x4d, PSM_TPINFO(inertia) },
{ 0x00, 0x60, PSM_TPINFO(uplateau) },
{ 0x00, 0x57, PSM_TPINFO(reach) },
{ 0x00, 0x58, PSM_TPINFO(draghys) },
{ 0x00, 0x59, PSM_TPINFO(mindrag) },
{ 0x00, 0x5a, PSM_TPINFO(upthresh) },
{ 0x00, 0x5c, PSM_TPINFO(threshold) },
{ 0x00, 0x5d, PSM_TPINFO(jenks) },
{ 0x00, 0x5e, PSM_TPINFO(ztime) },
{ 0x01, 0x2c, PSM_TPINFO(pts) },
{ 0x08, 0x2d, PSM_TPINFO(skipback) }
};
struct psm_softc *sc;
int error, newval, *oldvalp;
const int *tp;
if (arg1 == NULL || arg2 < 0 || arg2 >= nitems(data))
return (EINVAL);
sc = arg1;
tp = data[arg2];
oldvalp = (int *)((intptr_t)sc + tp[TPINFO]);
newval = *oldvalp;
error = sysctl_handle_int(oidp, &newval, 0, req);
if (error != 0)
return (error);
if (newval == *oldvalp)
return (0);
if (newval < 0 || newval > (tp[TPMASK] == 0 ? 255 : 1))
return (EINVAL);
error = trackpoint_command(sc, tp[TPMASK] == 0 ? 0x81 : 0x47,
tp[TPLOC], tp[TPMASK] == 0 ? newval : tp[TPMASK]);
if (error != 0)
return (error);
*oldvalp = newval;
return (0);
}
static void
trackpoint_sysctl_create_tree(struct psm_softc *sc)
{
if (sc->tpinfo.sysctl_tree != NULL)
return;
/* Attach extra trackpoint sysctl nodes under hw.psm.trackpoint */
sysctl_ctx_init(&sc->tpinfo.sysctl_ctx);
sc->tpinfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->tpinfo.sysctl_ctx,
SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, "trackpoint", CTLFLAG_RD,
0, "IBM/Lenovo TrackPoint");
/* hw.psm.trackpoint.sensitivity */
sc->tpinfo.sensitivity = 0x80;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"sensitivity", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_SENSITIVITY,
trackpoint_sysctl, "I",
"Sensitivity");
/* hw.psm.trackpoint.negative_inertia */
sc->tpinfo.inertia = 0x06;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"negative_inertia", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_NEGATIVE_INERTIA,
trackpoint_sysctl, "I",
"Negative inertia factor");
/* hw.psm.trackpoint.upper_plateau */
sc->tpinfo.uplateau = 0x61;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"upper_plateau", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_UPPER_PLATEAU,
trackpoint_sysctl, "I",
"Transfer function upper plateau speed");
/* hw.psm.trackpoint.backup_range */
sc->tpinfo.reach = 0x0a;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"backup_range", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_BACKUP_RANGE,
trackpoint_sysctl, "I",
"Backup range");
/* hw.psm.trackpoint.drag_hysteresis */
sc->tpinfo.draghys = 0xff;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"drag_hysteresis", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_DRAG_HYSTERESIS,
trackpoint_sysctl, "I",
"Drag hysteresis");
/* hw.psm.trackpoint.minimum_drag */
sc->tpinfo.mindrag = 0x14;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"minimum_drag", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_MINIMUM_DRAG,
trackpoint_sysctl, "I",
"Minimum drag");
/* hw.psm.trackpoint.up_threshold */
sc->tpinfo.upthresh = 0xff;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"up_threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_UP_THRESHOLD,
trackpoint_sysctl, "I",
"Up threshold for release");
/* hw.psm.trackpoint.threshold */
sc->tpinfo.threshold = 0x08;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_THRESHOLD,
trackpoint_sysctl, "I",
"Threshold");
/* hw.psm.trackpoint.jenks_curvature */
sc->tpinfo.jenks = 0x87;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"jenks_curvature", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_JENKS_CURVATURE,
trackpoint_sysctl, "I",
"Jenks curvature");
/* hw.psm.trackpoint.z_time */
sc->tpinfo.ztime = 0x26;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"z_time", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_Z_TIME,
trackpoint_sysctl, "I",
"Z time constant");
/* hw.psm.trackpoint.press_to_select */
sc->tpinfo.pts = 0x00;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"press_to_select", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_PRESS_TO_SELECT,
trackpoint_sysctl, "I",
"Press to Select");
/* hw.psm.trackpoint.skip_backups */
sc->tpinfo.skipback = 0x00;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"skip_backups", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_SKIP_BACKUPS,
trackpoint_sysctl, "I",
"Skip backups from drags");
}
static void
set_trackpoint_parameters(struct psm_softc *sc)
{
trackpoint_command(sc, 0x81, 0x4a, sc->tpinfo.sensitivity);
trackpoint_command(sc, 0x81, 0x60, sc->tpinfo.uplateau);
trackpoint_command(sc, 0x81, 0x4d, sc->tpinfo.inertia);
trackpoint_command(sc, 0x81, 0x57, sc->tpinfo.reach);
trackpoint_command(sc, 0x81, 0x58, sc->tpinfo.draghys);
trackpoint_command(sc, 0x81, 0x59, sc->tpinfo.mindrag);
trackpoint_command(sc, 0x81, 0x5a, sc->tpinfo.upthresh);
trackpoint_command(sc, 0x81, 0x5c, sc->tpinfo.threshold);
trackpoint_command(sc, 0x81, 0x5d, sc->tpinfo.jenks);
trackpoint_command(sc, 0x81, 0x5e, sc->tpinfo.ztime);
if (sc->tpinfo.pts == 0x01)
trackpoint_command(sc, 0x47, 0x2c, 0x01);
if (sc->tpinfo.skipback == 0x01)
trackpoint_command(sc, 0x47, 0x2d, 0x08);
}
static int
enable_trackpoint(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int id;
/*
* If called from enable_synaptics(), make sure that passthrough
* mode is enabled so we can reach the trackpoint.
* However, passthrough mode must be disabled before setting the
* trackpoint parameters, as rackpoint_command() enables and disables
* passthrough mode on its own.
*/
if (sc->synhw.capPassthrough)
synaptics_passthrough_on(sc);
if (send_aux_command(kbdc, 0xe1) != PSM_ACK ||
read_aux_data(kbdc) != 0x01)
goto no_trackpoint;
id = read_aux_data(kbdc);
if (id < 0x01)
goto no_trackpoint;
if (arg == PROBE)
sc->tphw = id;
if (!trackpoint_support)
goto no_trackpoint;
if (sc->synhw.capPassthrough)
synaptics_passthrough_off(sc);
if (arg == PROBE) {
trackpoint_sysctl_create_tree(sc);
/*
* Don't overwrite hwid and buttons when we are
* a guest device.
*/
if (!sc->synhw.capPassthrough) {
sc->hw.hwid = id;
sc->hw.buttons = 3;
}
}
set_trackpoint_parameters(sc);
return (TRUE);
no_trackpoint:
if (sc->synhw.capPassthrough)
synaptics_passthrough_off(sc);
return (FALSE);
}
/* Interlink electronics VersaPad */
static int
enable_versapad(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int data[3];
set_mouse_resolution(kbdc, PSMD_RES_MEDIUM_HIGH); /* set res. 2 */
set_mouse_sampling_rate(kbdc, 100); /* set rate 100 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
if (get_mouse_status(kbdc, data, 0, 3) < 3) /* get status */
return (FALSE);
if (data[2] != 0xa || data[1] != 0 ) /* rate == 0xa && res. == 0 */
return (FALSE);
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
return (TRUE); /* PS/2 absolute mode */
}
/* Elantech Touchpad */
static int
elantech_read_1(KBDC kbdc, int hwversion, int reg, int *val)
{
int res, readcmd, retidx;
int resp[3];
readcmd = hwversion == 2 ? ELANTECH_REG_READ : ELANTECH_REG_RDWR;
retidx = hwversion == 4 ? 1 : 0;
res = send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, readcmd) != PSM_ACK;
res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, reg) != PSM_ACK;
res |= get_mouse_status(kbdc, resp, 0, 3) != 3;
if (res == 0)
*val = resp[retidx];
return (res);
}
static int
elantech_write_1(KBDC kbdc, int hwversion, int reg, int val)
{
int res, writecmd;
writecmd = hwversion == 2 ? ELANTECH_REG_WRITE : ELANTECH_REG_RDWR;
res = send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, writecmd) != PSM_ACK;
res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, reg) != PSM_ACK;
if (hwversion == 4) {
res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, writecmd) != PSM_ACK;
}
res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, val) != PSM_ACK;
res |= set_mouse_scaling(kbdc, 1) == 0;
return (res);
}
static int
elantech_cmd(KBDC kbdc, int hwversion, int cmd, int *resp)
{
int res;
if (hwversion == 2) {
res = set_mouse_scaling(kbdc, 1) == 0;
res |= mouse_ext_command(kbdc, cmd) == 0;
} else {
res = send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, cmd) != PSM_ACK;
}
res |= get_mouse_status(kbdc, resp, 0, 3) != 3;
return (res);
}
static int
elantech_init(KBDC kbdc, elantechhw_t *elanhw)
{
int i, val, res, hwversion, reg10;
/* set absolute mode */
hwversion = elanhw->hwversion;
reg10 = -1;
switch (hwversion) {
case 2:
reg10 = elanhw->fwversion == 0x020030 ? 0x54 : 0xc4;
res = elantech_write_1(kbdc, hwversion, 0x10, reg10);
if (res)
break;
res = elantech_write_1(kbdc, hwversion, 0x11, 0x8A);
break;
case 3:
reg10 = 0x0b;
res = elantech_write_1(kbdc, hwversion, 0x10, reg10);
break;
case 4:
res = elantech_write_1(kbdc, hwversion, 0x07, 0x01);
break;
default:
res = 1;
}
/* Read back reg 0x10 to ensure hardware is ready. */
if (res == 0 && reg10 >= 0) {
for (i = 0; i < 5; i++) {
if (elantech_read_1(kbdc, hwversion, 0x10, &val) == 0)
break;
DELAY(2000);
}
if (i == 5)
res = 1;
}
if (res)
printf("couldn't set absolute mode\n");
return (res);
}
static void
elantech_init_synaptics(struct psm_softc *sc)
{
/* Set capabilites required by movement smother */
sc->synhw.infoMajor = sc->elanhw.hwversion;
sc->synhw.infoMinor = sc->elanhw.fwversion;
sc->synhw.infoXupmm = sc->elanhw.dpmmx;
sc->synhw.infoYupmm = sc->elanhw.dpmmy;
sc->synhw.verticalScroll = 0;
sc->synhw.nExtendedQueries = 4;
sc->synhw.capExtended = 1;
sc->synhw.capPassthrough = sc->elanhw.hastrackpoint;
sc->synhw.capClickPad = sc->elanhw.isclickpad;
sc->synhw.capMultiFinger = 1;
sc->synhw.capAdvancedGestures = 1;
sc->synhw.capPalmDetect = 1;
sc->synhw.capPen = 0;
sc->synhw.capReportsMax = 1;
sc->synhw.maximumXCoord = sc->elanhw.sizex;
sc->synhw.maximumYCoord = sc->elanhw.sizey;
sc->synhw.capReportsMin = 1;
sc->synhw.minimumXCoord = 0;
sc->synhw.minimumYCoord = 0;
if (sc->syninfo.sysctl_tree == NULL) {
synaptics_sysctl_create_tree(sc, "elantech",
"Elantech Touchpad");
/*
* Adjust synaptic smoother tunables
* 1. Disable finger detection pressure threshold. Unlike
* synaptics we assume the finger is acting when packet with
* its X&Y arrives not when pressure exceedes some threshold
* 2. Disable unrelated features like margins and noisy areas
* 3. Disable virtual scroll areas as 2nd finger is preferable
* 4. For clickpads set bottom quarter as 42% - 16% - 42% sized
* softbuttons
* 5. Scale down divisors and movement lengths by a factor of 3
* where 3 is Synaptics to Elantech (~2200/800) dpi ratio
*/
/* Set reporting range to be equal touchpad size */
sc->syninfo.max_x = sc->elanhw.sizex;
sc->syninfo.max_y = sc->elanhw.sizey;
/* Disable finger detection pressure threshold */
sc->syninfo.min_pressure = 1;
/* Use full area of touchpad */
sc->syninfo.margin_top = 0;
sc->syninfo.margin_right = 0;
sc->syninfo.margin_bottom = 0;
sc->syninfo.margin_left = 0;
/* Disable noisy area */
sc->syninfo.na_top = 0;
sc->syninfo.na_right = 0;
sc->syninfo.na_bottom = 0;
sc->syninfo.na_left = 0;
/* Tune divisors and movement lengths */
sc->syninfo.weight_len_squared = 200;
sc->syninfo.div_min = 3;
sc->syninfo.div_max = 6;
sc->syninfo.div_max_na = 10;
sc->syninfo.div_len = 30;
sc->syninfo.tap_max_delta = 25;
/* Disable virtual scrolling areas and tune its divisors */
sc->syninfo.vscroll_hor_area = 0;
sc->syninfo.vscroll_ver_area = 0;
sc->syninfo.vscroll_min_delta = 15;
sc->syninfo.vscroll_div_min = 30;
sc->syninfo.vscroll_div_max = 50;
/* Set bottom quarter as 42% - 16% - 42% sized softbuttons */
if (sc->elanhw.isclickpad) {
sc->syninfo.softbuttons_y = sc->elanhw.sizey / 4;
sc->syninfo.softbutton2_x = sc->elanhw.sizex * 11 / 25;
sc->syninfo.softbutton3_x = sc->elanhw.sizex * 14 / 25;
}
}
return;
}
static int
enable_elantech(struct psm_softc *sc, enum probearg arg)
{
static const int ic2hw[] =
/*IC: 0 1 2 3 4 5 6 7 8 9 a b c d e f */
{ 0, 0, 2, 0, 2, 3, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0 };
elantechhw_t elanhw;
int icversion, hwversion, dptracex, dptracey, id, resp[3], dpix, dpiy;
KBDC kbdc = sc->kbdc;
VLOG(3, (LOG_DEBUG, "elantech: BEGIN init\n"));
set_mouse_scaling(kbdc, 1);
set_mouse_scaling(kbdc, 1);
set_mouse_scaling(kbdc, 1);
if (get_mouse_status(kbdc, resp, 0, 3) != 3)
return (FALSE);
if (!ELANTECH_MAGIC(resp))
return (FALSE);
/* Identify the Touchpad version. */
if (elantech_cmd(kbdc, 2, ELANTECH_FW_VERSION, resp))
return (FALSE);
bzero(&elanhw, sizeof(elanhw));
elanhw.fwversion = (resp[0] << 16) | (resp[1] << 8) | resp[2];
icversion = resp[0] & 0x0f;
hwversion = ic2hw[icversion];
if (verbose >= 2)
printf("Elantech touchpad hardware v.%d firmware v.0x%06x\n",
hwversion, elanhw.fwversion);
if (ELANTECH_HW_IS_V1(elanhw.fwversion)) {
printf (" Unsupported touchpad hardware (v1)\n");
return (FALSE);
}
if (hwversion == 0) {
printf (" Unknown touchpad hardware (firmware v.0x%06x)\n",
elanhw.fwversion);
return (FALSE);
}
/* Get the Touchpad model information. */
elanhw.hwversion = hwversion;
elanhw.issemimt = hwversion == 2;
elanhw.isclickpad = (resp[1] & 0x10) != 0;
elanhw.hascrc = (resp[1] & 0x40) != 0;
elanhw.haspressure = elanhw.fwversion >= 0x020800;
/* Read the capability bits. */
if (elantech_cmd(kbdc, hwversion, ELANTECH_CAPABILITIES, resp) != 0) {
printf(" Failed to read capability bits\n");
return (FALSE);
}
elanhw.ntracesx = resp[1] - 1;
elanhw.ntracesy = resp[2] - 1;
elanhw.hastrackpoint = (resp[0] & 0x80) != 0;
/* Get the touchpad resolution */
switch (hwversion) {
case 4:
if (elantech_cmd(kbdc, hwversion, ELANTECH_RESOLUTION, resp)
== 0) {
dpix = (resp[1] & 0x0f) * 10 + 790;
dpiy = ((resp[1] & 0xf0) >> 4) * 10 + 790;
elanhw.dpmmx = (dpix * 10 + 5) / 254;
elanhw.dpmmy = (dpiy * 10 + 5) / 254;
break;
}
/* FALLTHROUGH */
case 2:
case 3:
elanhw.dpmmx = elanhw.dpmmy = 32; /* 800 dpi */
break;
}
if (!elantech_support)
return (FALSE);
if (elantech_init(kbdc, &elanhw)) {
printf("couldn't initialize elantech touchpad\n");
return (FALSE);
}
/*
* Get the touchpad reporting range.
* On HW v.3 touchpads it should be done after switching hardware
* to real resolution mode (by setting bit 3 of reg10)
*/
if (elantech_cmd(kbdc, hwversion, ELANTECH_FW_ID, resp) != 0) {
printf(" Failed to read touchpad size\n");
elanhw.sizex = 10000; /* Arbitrary high values to */
elanhw.sizey = 10000; /* prevent clipping in smoother */
} else if (hwversion == 2) {
dptracex = dptracey = 64;
if ((elanhw.fwversion >> 16) == 0x14 && (resp[1] & 0x10) &&
!elantech_cmd(kbdc, hwversion, ELANTECH_SAMPLE, resp)) {
dptracex = resp[1] / 2;
dptracey = resp[2] / 2;
}
elanhw.sizex = (elanhw.ntracesx - 1) * dptracex;
elanhw.sizey = (elanhw.ntracesy - 1) * dptracey;
} else {
elanhw.sizex = (resp[0] & 0x0f) << 8 | resp[1];
elanhw.sizey = (resp[0] & 0xf0) << 4 | resp[2];
}
if (verbose >= 2) {
printf(" Model information:\n");
printf(" MaxX: %d\n", elanhw.sizex);
printf(" MaxY: %d\n", elanhw.sizey);
printf(" DpmmX: %d\n", elanhw.dpmmx);
printf(" DpmmY: %d\n", elanhw.dpmmy);
printf(" TracesX: %d\n", elanhw.ntracesx);
printf(" TracesY: %d\n", elanhw.ntracesy);
printf(" SemiMT: %d\n", elanhw.issemimt);
printf(" Clickpad: %d\n", elanhw.isclickpad);
printf(" Trackpoint: %d\n", elanhw.hastrackpoint);
printf(" CRC: %d\n", elanhw.hascrc);
printf(" Pressure: %d\n", elanhw.haspressure);
}
VLOG(3, (LOG_DEBUG, "elantech: END init\n"));
if (arg == PROBE) {
sc->elanhw = elanhw;
sc->hw.buttons = 3;
/* Initialize synaptics movement smoother */
elantech_init_synaptics(sc);
for (id = 0; id < ELANTECH_MAX_FINGERS; id++)
PSM_FINGER_RESET(sc->elanaction.fingers[id]);
}
return (TRUE);
}
/*
* Return true if 'now' is earlier than (start + (secs.usecs)).
* Now may be NULL and the function will fetch the current time from
* getmicrouptime(), or a cached 'now' can be passed in.
* All values should be numbers derived from getmicrouptime().
*/
static int
timeelapsed(start, secs, usecs, now)
const struct timeval *start, *now;
int secs, usecs;
{
struct timeval snow, tv;
/* if there is no 'now' passed in, the get it as a convience. */
if (now == NULL) {
getmicrouptime(&snow);
now = &snow;
}
tv.tv_sec = secs;
tv.tv_usec = usecs;
timevaladd(&tv, start);
return (timevalcmp(&tv, now, <));
}
static int
psmresume(device_t dev)
{
struct psm_softc *sc = device_get_softc(dev);
int unit = device_get_unit(dev);
int err;
VLOG(2, (LOG_NOTICE, "psm%d: system resume hook called.\n", unit));
if ((sc->config &
(PSM_CONFIG_HOOKRESUME | PSM_CONFIG_INITAFTERSUSPEND)) == 0)
return (0);
err = reinitialize(sc, sc->config & PSM_CONFIG_INITAFTERSUSPEND);
if ((sc->state & PSM_ASLP) && !(sc->state & PSM_VALID)) {
/*
* Release the blocked process; it must be notified that
* the device cannot be accessed anymore.
*/
sc->state &= ~PSM_ASLP;
wakeup(sc);
}
VLOG(2, (LOG_DEBUG, "psm%d: system resume hook exiting.\n", unit));
return (err);
}
DRIVER_MODULE(psm, atkbdc, psm_driver, psm_devclass, 0, 0);
#ifdef DEV_ISA
/*
* This sucks up assignments from PNPBIOS and ACPI.
*/
/*
* When the PS/2 mouse device is reported by ACPI or PnP BIOS, it may
* appear BEFORE the AT keyboard controller. As the PS/2 mouse device
* can be probed and attached only after the AT keyboard controller is
* attached, we shall quietly reserve the IRQ resource for later use.
* If the PS/2 mouse device is reported to us AFTER the keyboard controller,
* copy the IRQ resource to the PS/2 mouse device instance hanging
* under the keyboard controller, then probe and attach it.
*/
static devclass_t psmcpnp_devclass;
static device_probe_t psmcpnp_probe;
static device_attach_t psmcpnp_attach;
static device_method_t psmcpnp_methods[] = {
DEVMETHOD(device_probe, psmcpnp_probe),
DEVMETHOD(device_attach, psmcpnp_attach),
{ 0, 0 }
};
static driver_t psmcpnp_driver = {
PSMCPNP_DRIVER_NAME,
psmcpnp_methods,
1, /* no softc */
};
static struct isa_pnp_id psmcpnp_ids[] = {
{ 0x030fd041, "PS/2 mouse port" }, /* PNP0F03 */
{ 0x0e0fd041, "PS/2 mouse port" }, /* PNP0F0E */
{ 0x120fd041, "PS/2 mouse port" }, /* PNP0F12 */
{ 0x130fd041, "PS/2 mouse port" }, /* PNP0F13 */
{ 0x1303d041, "PS/2 port" }, /* PNP0313, XXX */
{ 0x02002e4f, "Dell PS/2 mouse port" }, /* Lat. X200, Dell */
{ 0x0002a906, "ALPS Glide Point" }, /* ALPS Glide Point */
{ 0x80374d24, "IBM PS/2 mouse port" }, /* IBM3780, ThinkPad */
{ 0x81374d24, "IBM PS/2 mouse port" }, /* IBM3781, ThinkPad */
{ 0x0190d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9001, Vaio */
{ 0x0290d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9002, Vaio */
{ 0x0390d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9003, Vaio */
{ 0x0490d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9004, Vaio */
{ 0 }
};
static int
create_a_copy(device_t atkbdc, device_t me)
{
device_t psm;
u_long irq;
/* find the PS/2 mouse device instance under the keyboard controller */
psm = device_find_child(atkbdc, PSM_DRIVER_NAME,
device_get_unit(atkbdc));
if (psm == NULL)
return (ENXIO);
if (device_get_state(psm) != DS_NOTPRESENT)
return (0);
/* move our resource to the found device */
irq = bus_get_resource_start(me, SYS_RES_IRQ, 0);
bus_delete_resource(me, SYS_RES_IRQ, 0);
bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1);
/* ...then probe and attach it */
return (device_probe_and_attach(psm));
}
static int
psmcpnp_probe(device_t dev)
{
struct resource *res;
u_long irq;
int rid;
if (ISA_PNP_PROBE(device_get_parent(dev), dev, psmcpnp_ids))
return (ENXIO);
/*
* The PnP BIOS and ACPI are supposed to assign an IRQ (12)
* to the PS/2 mouse device node. But, some buggy PnP BIOS
* declares the PS/2 mouse device node without an IRQ resource!
* If this happens, we shall refer to device hints.
* If we still don't find it there, use a hardcoded value... XXX
*/
rid = 0;
irq = bus_get_resource_start(dev, SYS_RES_IRQ, rid);
if (irq <= 0) {
if (resource_long_value(PSM_DRIVER_NAME,
device_get_unit(dev),"irq", &irq) != 0)
irq = 12; /* XXX */
device_printf(dev, "irq resource info is missing; "
"assuming irq %ld\n", irq);
bus_set_resource(dev, SYS_RES_IRQ, rid, irq, 1);
}
res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 0);
bus_release_resource(dev, SYS_RES_IRQ, rid, res);
/* keep quiet */
if (!bootverbose)
device_quiet(dev);
return ((res == NULL) ? ENXIO : 0);
}
static int
psmcpnp_attach(device_t dev)
{
device_t atkbdc;
/* find the keyboard controller, which may be on acpi* or isa* bus */
atkbdc = devclass_get_device(devclass_find(ATKBDC_DRIVER_NAME),
device_get_unit(dev));
if ((atkbdc != NULL) && (device_get_state(atkbdc) == DS_ATTACHED))
create_a_copy(atkbdc, dev);
return (0);
}
DRIVER_MODULE(psmcpnp, isa, psmcpnp_driver, psmcpnp_devclass, 0, 0);
DRIVER_MODULE(psmcpnp, acpi, psmcpnp_driver, psmcpnp_devclass, 0, 0);
#endif /* DEV_ISA */
Reference in New Issue View Git Blame Copy Permalink