d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
22d7708455
freebsd-skq/sys/dev/iwm/if_iwmreg.h
Andriy Voskoboinyk 589526906c iwm(4): use correct channel list source for Intel 3168 
Intel 3168 uses another EEPROM section to store channel flags;
port missing bits from iwlwifi to make it work.

PR:		230750, 236235
Tested by:	Bert JW Regeer <xistence@0x58.com>
MFC after:	3 days
2019-03-11 08:30:29 +00:00

6141 lines
211 KiB
C
Raw Blame History

/* $OpenBSD: if_iwmreg.h,v 1.4 2015/06/15 08:06:11 stsp Exp $ */
/* $FreeBSD$ */
/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*****************************************************************************/
#ifndef __IF_IWM_REG_H__
#define __IF_IWM_REG_H__
#define le16_to_cpup(_a_) (le16toh(*(const uint16_t *)(_a_)))
#define le32_to_cpup(_a_) (le32toh(*(const uint32_t *)(_a_)))
/*
* BEGIN iwl-csr.h
*/
/*
* CSR (control and status registers)
*
* CSR registers are mapped directly into PCI bus space, and are accessible
* whenever platform supplies power to device, even when device is in
* low power states due to driver-invoked device resets
* (e.g. IWM_CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes.
*
* Use iwl_write32() and iwl_read32() family to access these registers;
* these provide simple PCI bus access, without waking up the MAC.
* Do not use iwl_write_direct32() family for these registers;
* no need to "grab nic access" via IWM_CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ.
* The MAC (uCode processor, etc.) does not need to be powered up for accessing
* the CSR registers.
*
* NOTE: Device does need to be awake in order to read this memory
* via IWM_CSR_EEPROM and IWM_CSR_OTP registers
*/
#define IWM_CSR_HW_IF_CONFIG_REG (0x000) /* hardware interface config */
#define IWM_CSR_INT_COALESCING (0x004) /* accum ints, 32-usec units */
#define IWM_CSR_INT (0x008) /* host interrupt status/ack */
#define IWM_CSR_INT_MASK (0x00c) /* host interrupt enable */
#define IWM_CSR_FH_INT_STATUS (0x010) /* busmaster int status/ack*/
#define IWM_CSR_GPIO_IN (0x018) /* read external chip pins */
#define IWM_CSR_RESET (0x020) /* busmaster enable, NMI, etc*/
#define IWM_CSR_GP_CNTRL (0x024)
/* 2nd byte of IWM_CSR_INT_COALESCING, not accessible via iwl_write32()! */
#define IWM_CSR_INT_PERIODIC_REG (0x005)
/*
* Hardware revision info
* Bit fields:
* 31-16: Reserved
* 15-4: Type of device: see IWM_CSR_HW_REV_TYPE_xxx definitions
* 3-2: Revision step: 0 = A, 1 = B, 2 = C, 3 = D
* 1-0: "Dash" (-) value, as in A-1, etc.
*/
#define IWM_CSR_HW_REV (0x028)
/*
* EEPROM and OTP (one-time-programmable) memory reads
*
* NOTE: Device must be awake, initialized via apm_ops.init(),
* in order to read.
*/
#define IWM_CSR_EEPROM_REG (0x02c)
#define IWM_CSR_EEPROM_GP (0x030)
#define IWM_CSR_OTP_GP_REG (0x034)
#define IWM_CSR_GIO_REG (0x03C)
#define IWM_CSR_GP_UCODE_REG (0x048)
#define IWM_CSR_GP_DRIVER_REG (0x050)
/*
* UCODE-DRIVER GP (general purpose) mailbox registers.
* SET/CLR registers set/clear bit(s) if "1" is written.
*/
#define IWM_CSR_UCODE_DRV_GP1 (0x054)
#define IWM_CSR_UCODE_DRV_GP1_SET (0x058)
#define IWM_CSR_UCODE_DRV_GP1_CLR (0x05c)
#define IWM_CSR_UCODE_DRV_GP2 (0x060)
#define IWM_CSR_MBOX_SET_REG (0x088)
#define IWM_CSR_MBOX_SET_REG_OS_ALIVE 0x20
#define IWM_CSR_LED_REG (0x094)
#define IWM_CSR_DRAM_INT_TBL_REG (0x0A0)
#define IWM_CSR_MAC_SHADOW_REG_CTRL (0x0A8) /* 6000 and up */
/* GIO Chicken Bits (PCI Express bus link power management) */
#define IWM_CSR_GIO_CHICKEN_BITS (0x100)
/* Analog phase-lock-loop configuration */
#define IWM_CSR_ANA_PLL_CFG (0x20c)
/*
* CSR Hardware Revision Workaround Register. Indicates hardware rev;
* "step" determines CCK backoff for txpower calculation. Used for 4965 only.
* See also IWM_CSR_HW_REV register.
* Bit fields:
* 3-2: 0 = A, 1 = B, 2 = C, 3 = D step
* 1-0: "Dash" (-) value, as in C-1, etc.
*/
#define IWM_CSR_HW_REV_WA_REG (0x22C)
#define IWM_CSR_DBG_HPET_MEM_REG (0x240)
#define IWM_CSR_DBG_LINK_PWR_MGMT_REG (0x250)
/* Bits for IWM_CSR_HW_IF_CONFIG_REG */
#define IWM_CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH (0x00000003)
#define IWM_CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP (0x0000000C)
#define IWM_CSR_HW_IF_CONFIG_REG_MSK_BOARD_VER (0x000000C0)
#define IWM_CSR_HW_IF_CONFIG_REG_BIT_MAC_SI (0x00000100)
#define IWM_CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI (0x00000200)
#define IWM_CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE (0x00000C00)
#define IWM_CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH (0x00003000)
#define IWM_CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP (0x0000C000)
#define IWM_CSR_HW_IF_CONFIG_REG_POS_MAC_DASH (0)
#define IWM_CSR_HW_IF_CONFIG_REG_POS_MAC_STEP (2)
#define IWM_CSR_HW_IF_CONFIG_REG_POS_BOARD_VER (6)
#define IWM_CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE (10)
#define IWM_CSR_HW_IF_CONFIG_REG_POS_PHY_DASH (12)
#define IWM_CSR_HW_IF_CONFIG_REG_POS_PHY_STEP (14)
#define IWM_CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000)
#define IWM_CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000)
#define IWM_CSR_HW_IF_CONFIG_REG_BIT_NIC_READY (0x00400000) /* PCI_OWN_SEM */
#define IWM_CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */
#define IWM_CSR_HW_IF_CONFIG_REG_PREPARE (0x08000000) /* WAKE_ME */
#define IWM_CSR_HW_IF_CONFIG_REG_ENABLE_PME (0x10000000)
#define IWM_CSR_HW_IF_CONFIG_REG_PERSIST_MODE (0x40000000) /* PERSISTENCE */
#define IWM_CSR_INT_PERIODIC_DIS (0x00) /* disable periodic int*/
#define IWM_CSR_INT_PERIODIC_ENA (0xFF) /* 255*32 usec ~ 8 msec*/
/* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
* acknowledged (reset) by host writing "1" to flagged bits. */
#define IWM_CSR_INT_BIT_FH_RX (1 << 31) /* Rx DMA, cmd responses, FH_INT[17:16] */
#define IWM_CSR_INT_BIT_HW_ERR (1 << 29) /* DMA hardware error FH_INT[31] */
#define IWM_CSR_INT_BIT_RX_PERIODIC (1 << 28) /* Rx periodic */
#define IWM_CSR_INT_BIT_FH_TX (1 << 27) /* Tx DMA FH_INT[1:0] */
#define IWM_CSR_INT_BIT_SCD (1 << 26) /* TXQ pointer advanced */
#define IWM_CSR_INT_BIT_SW_ERR (1 << 25) /* uCode error */
#define IWM_CSR_INT_BIT_RF_KILL (1 << 7) /* HW RFKILL switch GP_CNTRL[27] toggled */
#define IWM_CSR_INT_BIT_CT_KILL (1 << 6) /* Critical temp (chip too hot) rfkill */
#define IWM_CSR_INT_BIT_SW_RX (1 << 3) /* Rx, command responses */
#define IWM_CSR_INT_BIT_WAKEUP (1 << 1) /* NIC controller waking up (pwr mgmt) */
#define IWM_CSR_INT_BIT_ALIVE (1 << 0) /* uCode interrupts once it initializes */
#define IWM_CSR_INI_SET_MASK (IWM_CSR_INT_BIT_FH_RX | \
IWM_CSR_INT_BIT_HW_ERR | \
IWM_CSR_INT_BIT_FH_TX | \
IWM_CSR_INT_BIT_SW_ERR | \
IWM_CSR_INT_BIT_RF_KILL | \
IWM_CSR_INT_BIT_SW_RX | \
IWM_CSR_INT_BIT_WAKEUP | \
IWM_CSR_INT_BIT_ALIVE | \
IWM_CSR_INT_BIT_RX_PERIODIC)
/* interrupt flags in FH (flow handler) (PCI busmaster DMA) */
#define IWM_CSR_FH_INT_BIT_ERR (1 << 31) /* Error */
#define IWM_CSR_FH_INT_BIT_HI_PRIOR (1 << 30) /* High priority Rx, bypass coalescing */
#define IWM_CSR_FH_INT_BIT_RX_CHNL1 (1 << 17) /* Rx channel 1 */
#define IWM_CSR_FH_INT_BIT_RX_CHNL0 (1 << 16) /* Rx channel 0 */
#define IWM_CSR_FH_INT_BIT_TX_CHNL1 (1 << 1) /* Tx channel 1 */
#define IWM_CSR_FH_INT_BIT_TX_CHNL0 (1 << 0) /* Tx channel 0 */
#define IWM_CSR_FH_INT_RX_MASK (IWM_CSR_FH_INT_BIT_HI_PRIOR | \
IWM_CSR_FH_INT_BIT_RX_CHNL1 | \
IWM_CSR_FH_INT_BIT_RX_CHNL0)
#define IWM_CSR_FH_INT_TX_MASK (IWM_CSR_FH_INT_BIT_TX_CHNL1 | \
IWM_CSR_FH_INT_BIT_TX_CHNL0)
/* GPIO */
#define IWM_CSR_GPIO_IN_BIT_AUX_POWER (0x00000200)
#define IWM_CSR_GPIO_IN_VAL_VAUX_PWR_SRC (0x00000000)
#define IWM_CSR_GPIO_IN_VAL_VMAIN_PWR_SRC (0x00000200)
/* RESET */
#define IWM_CSR_RESET_REG_FLAG_NEVO_RESET (0x00000001)
#define IWM_CSR_RESET_REG_FLAG_FORCE_NMI (0x00000002)
#define IWM_CSR_RESET_REG_FLAG_SW_RESET (0x00000080)
#define IWM_CSR_RESET_REG_FLAG_MASTER_DISABLED (0x00000100)
#define IWM_CSR_RESET_REG_FLAG_STOP_MASTER (0x00000200)
#define IWM_CSR_RESET_LINK_PWR_MGMT_DISABLED (0x80000000)
/*
* GP (general purpose) CONTROL REGISTER
* Bit fields:
* 27: HW_RF_KILL_SW
* Indicates state of (platform's) hardware RF-Kill switch
* 26-24: POWER_SAVE_TYPE
* Indicates current power-saving mode:
* 000 -- No power saving
* 001 -- MAC power-down
* 010 -- PHY (radio) power-down
* 011 -- Error
* 9-6: SYS_CONFIG
* Indicates current system configuration, reflecting pins on chip
* as forced high/low by device circuit board.
* 4: GOING_TO_SLEEP
* Indicates MAC is entering a power-saving sleep power-down.
* Not a good time to access device-internal resources.
* 3: MAC_ACCESS_REQ
* Host sets this to request and maintain MAC wakeup, to allow host
* access to device-internal resources. Host must wait for
* MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR
* device registers.
* 2: INIT_DONE
* Host sets this to put device into fully operational D0 power mode.
* Host resets this after SW_RESET to put device into low power mode.
* 0: MAC_CLOCK_READY
* Indicates MAC (ucode processor, etc.) is powered up and can run.
* Internal resources are accessible.
* NOTE: This does not indicate that the processor is actually running.
* NOTE: This does not indicate that device has completed
* init or post-power-down restore of internal SRAM memory.
* Use IWM_CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
* SRAM is restored and uCode is in normal operation mode.
* Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
* do not need to save/restore it.
* NOTE: After device reset, this bit remains "0" until host sets
* INIT_DONE
*/
#define IWM_CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY (0x00000001)
#define IWM_CSR_GP_CNTRL_REG_FLAG_INIT_DONE (0x00000004)
#define IWM_CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ (0x00000008)
#define IWM_CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP (0x00000010)
#define IWM_CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN (0x00000001)
#define IWM_CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE (0x07000000)
#define IWM_CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE (0x04000000)
#define IWM_CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW (0x08000000)
/* HW REV */
#define IWM_CSR_HW_REV_DASH(_val) (((_val) & 0x0000003) >> 0)
#define IWM_CSR_HW_REV_STEP(_val) (((_val) & 0x000000C) >> 2)
/**
* hw_rev values
*/
enum {
IWM_SILICON_A_STEP = 0,
IWM_SILICON_B_STEP,
IWM_SILICON_C_STEP,
};
#define IWM_CSR_HW_REV_TYPE_MSK (0x000FFF0)
#define IWM_CSR_HW_REV_TYPE_5300 (0x0000020)
#define IWM_CSR_HW_REV_TYPE_5350 (0x0000030)
#define IWM_CSR_HW_REV_TYPE_5100 (0x0000050)
#define IWM_CSR_HW_REV_TYPE_5150 (0x0000040)
#define IWM_CSR_HW_REV_TYPE_1000 (0x0000060)
#define IWM_CSR_HW_REV_TYPE_6x00 (0x0000070)
#define IWM_CSR_HW_REV_TYPE_6x50 (0x0000080)
#define IWM_CSR_HW_REV_TYPE_6150 (0x0000084)
#define IWM_CSR_HW_REV_TYPE_6x05 (0x00000B0)
#define IWM_CSR_HW_REV_TYPE_6x30 IWM_CSR_HW_REV_TYPE_6x05
#define IWM_CSR_HW_REV_TYPE_6x35 IWM_CSR_HW_REV_TYPE_6x05
#define IWM_CSR_HW_REV_TYPE_2x30 (0x00000C0)
#define IWM_CSR_HW_REV_TYPE_2x00 (0x0000100)
#define IWM_CSR_HW_REV_TYPE_105 (0x0000110)
#define IWM_CSR_HW_REV_TYPE_135 (0x0000120)
#define IWM_CSR_HW_REV_TYPE_7265D (0x0000210)
#define IWM_CSR_HW_REV_TYPE_NONE (0x00001F0)
/* EEPROM REG */
#define IWM_CSR_EEPROM_REG_READ_VALID_MSK (0x00000001)
#define IWM_CSR_EEPROM_REG_BIT_CMD (0x00000002)
#define IWM_CSR_EEPROM_REG_MSK_ADDR (0x0000FFFC)
#define IWM_CSR_EEPROM_REG_MSK_DATA (0xFFFF0000)
/* EEPROM GP */
#define IWM_CSR_EEPROM_GP_VALID_MSK (0x00000007) /* signature */
#define IWM_CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180)
#define IWM_CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP (0x00000000)
#define IWM_CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP (0x00000001)
#define IWM_CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K (0x00000002)
#define IWM_CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K (0x00000004)
/* One-time-programmable memory general purpose reg */
#define IWM_CSR_OTP_GP_REG_DEVICE_SELECT (0x00010000) /* 0 - EEPROM, 1 - OTP */
#define IWM_CSR_OTP_GP_REG_OTP_ACCESS_MODE (0x00020000) /* 0 - absolute, 1 - relative */
#define IWM_CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK (0x00100000) /* bit 20 */
#define IWM_CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK (0x00200000) /* bit 21 */
/* GP REG */
#define IWM_CSR_GP_REG_POWER_SAVE_STATUS_MSK (0x03000000) /* bit 24/25 */
#define IWM_CSR_GP_REG_NO_POWER_SAVE (0x00000000)
#define IWM_CSR_GP_REG_MAC_POWER_SAVE (0x01000000)
#define IWM_CSR_GP_REG_PHY_POWER_SAVE (0x02000000)
#define IWM_CSR_GP_REG_POWER_SAVE_ERROR (0x03000000)
/* CSR GIO */
#define IWM_CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002)
/*
* UCODE-DRIVER GP (general purpose) mailbox register 1
* Host driver and uCode write and/or read this register to communicate with
* each other.
* Bit fields:
* 4: UCODE_DISABLE
* Host sets this to request permanent halt of uCode, same as
* sending CARD_STATE command with "halt" bit set.
* 3: CT_KILL_EXIT
* Host sets this to request exit from CT_KILL state, i.e. host thinks
* device temperature is low enough to continue normal operation.
* 2: CMD_BLOCKED
* Host sets this during RF KILL power-down sequence (HW, SW, CT KILL)
* to release uCode to clear all Tx and command queues, enter
* unassociated mode, and power down.
* NOTE: Some devices also use HBUS_TARG_MBX_C register for this bit.
* 1: SW_BIT_RFKILL
* Host sets this when issuing CARD_STATE command to request
* device sleep.
* 0: MAC_SLEEP
* uCode sets this when preparing a power-saving power-down.
* uCode resets this when power-up is complete and SRAM is sane.
* NOTE: device saves internal SRAM data to host when powering down,
* and must restore this data after powering back up.
* MAC_SLEEP is the best indication that restore is complete.
* Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
* do not need to save/restore it.
*/
#define IWM_CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001)
#define IWM_CSR_UCODE_SW_BIT_RFKILL (0x00000002)
#define IWM_CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED (0x00000004)
#define IWM_CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT (0x00000008)
#define IWM_CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE (0x00000020)
/* GP Driver */
#define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_MSK (0x00000003)
#define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_3x3_HYB (0x00000000)
#define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB (0x00000001)
#define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA (0x00000002)
#define IWM_CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6 (0x00000004)
#define IWM_CSR_GP_DRIVER_REG_BIT_6050_1x2 (0x00000008)
#define IWM_CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER (0x00000080)
/* GIO Chicken Bits (PCI Express bus link power management) */
#define IWM_CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX (0x00800000)
#define IWM_CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER (0x20000000)
/* LED */
#define IWM_CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF)
#define IWM_CSR_LED_REG_TURN_ON (0x60)
#define IWM_CSR_LED_REG_TURN_OFF (0x20)
/* ANA_PLL */
#define IWM_CSR50_ANA_PLL_CFG_VAL (0x00880300)
/* HPET MEM debug */
#define IWM_CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000)
/* DRAM INT TABLE */
#define IWM_CSR_DRAM_INT_TBL_ENABLE (1 << 31)
#define IWM_CSR_DRAM_INIT_TBL_WRITE_POINTER (1 << 28)
#define IWM_CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27)
/* SECURE boot registers */
#define IWM_CSR_SECURE_BOOT_CONFIG_ADDR (0x100)
enum iwm_secure_boot_config_reg {
IWM_CSR_SECURE_BOOT_CONFIG_INSPECTOR_BURNED_IN_OTP = 0x00000001,
IWM_CSR_SECURE_BOOT_CONFIG_INSPECTOR_NOT_REQ = 0x00000002,
};
#define IWM_CSR_SECURE_BOOT_CPU1_STATUS_ADDR (0x100)
#define IWM_CSR_SECURE_BOOT_CPU2_STATUS_ADDR (0x100)
enum iwm_secure_boot_status_reg {
IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_STATUS = 0x00000003,
IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_COMPLETED = 0x00000002,
IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_SUCCESS = 0x00000004,
IWM_CSR_SECURE_BOOT_CPU_STATUS_VERF_FAIL = 0x00000008,
IWM_CSR_SECURE_BOOT_CPU_STATUS_SIGN_VERF_FAIL = 0x00000010,
};
#define IWM_FH_UCODE_LOAD_STATUS 0x1af0
#define IWM_FH_MEM_TB_MAX_LENGTH 0x20000
#define IWM_LMPM_SECURE_UCODE_LOAD_CPU1_HDR_ADDR 0x1e78
#define IWM_LMPM_SECURE_UCODE_LOAD_CPU2_HDR_ADDR 0x1e7c
#define IWM_LMPM_SECURE_CPU1_HDR_MEM_SPACE 0x420000
#define IWM_LMPM_SECURE_CPU2_HDR_MEM_SPACE 0x420400
#define IWM_CSR_SECURE_TIME_OUT (100)
/* extended range in FW SRAM */
#define IWM_FW_MEM_EXTENDED_START 0x40000
#define IWM_FW_MEM_EXTENDED_END 0x57FFF
/* FW chicken bits */
#define IWM_LMPM_CHICK 0xa01ff8
#define IWM_LMPM_CHICK_EXTENDED_ADDR_SPACE 0x01
#define IWM_FH_TCSR_0_REG0 (0x1D00)
/*
* HBUS (Host-side Bus)
*
* HBUS registers are mapped directly into PCI bus space, but are used
* to indirectly access device's internal memory or registers that
* may be powered-down.
*
* Use iwl_write_direct32()/iwl_read_direct32() family for these registers;
* host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
* to make sure the MAC (uCode processor, etc.) is powered up for accessing
* internal resources.
*
* Do not use iwl_write32()/iwl_read32() family to access these registers;
* these provide only simple PCI bus access, without waking up the MAC.
*/
#define IWM_HBUS_BASE (0x400)
/*
* Registers for accessing device's internal SRAM memory (e.g. SCD SRAM
* structures, error log, event log, verifying uCode load).
* First write to address register, then read from or write to data register
* to complete the job. Once the address register is set up, accesses to
* data registers auto-increment the address by one dword.
* Bit usage for address registers (read or write):
* 0-31: memory address within device
*/
#define IWM_HBUS_TARG_MEM_RADDR (IWM_HBUS_BASE+0x00c)
#define IWM_HBUS_TARG_MEM_WADDR (IWM_HBUS_BASE+0x010)
#define IWM_HBUS_TARG_MEM_WDAT (IWM_HBUS_BASE+0x018)
#define IWM_HBUS_TARG_MEM_RDAT (IWM_HBUS_BASE+0x01c)
/* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */
#define IWM_HBUS_TARG_MBX_C (IWM_HBUS_BASE+0x030)
#define IWM_HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED (0x00000004)
/*
* Registers for accessing device's internal peripheral registers
* (e.g. SCD, BSM, etc.). First write to address register,
* then read from or write to data register to complete the job.
* Bit usage for address registers (read or write):
* 0-15: register address (offset) within device
* 24-25: (# bytes - 1) to read or write (e.g. 3 for dword)
*/
#define IWM_HBUS_TARG_PRPH_WADDR (IWM_HBUS_BASE+0x044)
#define IWM_HBUS_TARG_PRPH_RADDR (IWM_HBUS_BASE+0x048)
#define IWM_HBUS_TARG_PRPH_WDAT (IWM_HBUS_BASE+0x04c)
#define IWM_HBUS_TARG_PRPH_RDAT (IWM_HBUS_BASE+0x050)
/* enable the ID buf for read */
#define IWM_WFPM_PS_CTL_CLR 0xa0300c
#define IWM_WFMP_MAC_ADDR_0 0xa03080
#define IWM_WFMP_MAC_ADDR_1 0xa03084
#define IWM_LMPM_PMG_EN 0xa01cec
#define IWM_RADIO_REG_SYS_MANUAL_DFT_0 0xad4078
#define IWM_RFIC_REG_RD 0xad0470
#define IWM_WFPM_CTRL_REG 0xa03030
#define IWM_WFPM_AUX_CTL_AUX_IF_MAC_OWNER_MSK 0x08000000
#define IWM_ENABLE_WFPM 0x80000000
#define IWM_AUX_MISC_REG 0xa200b0
#define IWM_HW_STEP_LOCATION_BITS 24
#define IWM_AUX_MISC_MASTER1_EN 0xa20818
#define IWM_AUX_MISC_MASTER1_EN_SBE_MSK 0x1
#define IWM_AUX_MISC_MASTER1_SMPHR_STATUS 0xa20800
#define IWM_RSA_ENABLE 0xa24b08
#define IWM_PREG_AUX_BUS_WPROT_0 0xa04cc0
#define IWM_SB_CFG_OVERRIDE_ADDR 0xa26c78
#define IWM_SB_CFG_OVERRIDE_ENABLE 0x8000
#define IWM_SB_CFG_BASE_OVERRIDE 0xa20000
#define IWM_SB_MODIFY_CFG_FLAG 0xa03088
#define IWM_SB_CPU_1_STATUS 0xa01e30
#define IWM_SB_CPU_2_STATUS 0Xa01e34
/* Used to enable DBGM */
#define IWM_HBUS_TARG_TEST_REG (IWM_HBUS_BASE+0x05c)
/*
* Per-Tx-queue write pointer (index, really!)
* Indicates index to next TFD that driver will fill (1 past latest filled).
* Bit usage:
* 0-7: queue write index
* 11-8: queue selector
*/
#define IWM_HBUS_TARG_WRPTR (IWM_HBUS_BASE+0x060)
/**********************************************************
* CSR values
**********************************************************/
/*
* host interrupt timeout value
* used with setting interrupt coalescing timer
* the CSR_INT_COALESCING is an 8 bit register in 32-usec unit
*
* default interrupt coalescing timer is 64 x 32 = 2048 usecs
*/
#define IWM_HOST_INT_TIMEOUT_MAX (0xFF)
#define IWM_HOST_INT_TIMEOUT_DEF (0x40)
#define IWM_HOST_INT_TIMEOUT_MIN (0x0)
#define IWM_HOST_INT_OPER_MODE (1 << 31)
/*****************************************************************************
* 7000/3000 series SHR DTS addresses *
*****************************************************************************/
/* Diode Results Register Structure: */
enum iwm_dtd_diode_reg {
IWM_DTS_DIODE_REG_DIG_VAL = 0x000000FF, /* bits [7:0] */
IWM_DTS_DIODE_REG_VREF_LOW = 0x0000FF00, /* bits [15:8] */
IWM_DTS_DIODE_REG_VREF_HIGH = 0x00FF0000, /* bits [23:16] */
IWM_DTS_DIODE_REG_VREF_ID = 0x03000000, /* bits [25:24] */
IWM_DTS_DIODE_REG_PASS_ONCE = 0x80000000, /* bits [31:31] */
IWM_DTS_DIODE_REG_FLAGS_MSK = 0xFF000000, /* bits [31:24] */
/* Those are the masks INSIDE the flags bit-field: */
IWM_DTS_DIODE_REG_FLAGS_VREFS_ID_POS = 0,
IWM_DTS_DIODE_REG_FLAGS_VREFS_ID = 0x00000003, /* bits [1:0] */
IWM_DTS_DIODE_REG_FLAGS_PASS_ONCE_POS = 7,
IWM_DTS_DIODE_REG_FLAGS_PASS_ONCE = 0x00000080, /* bits [7:7] */
};
/*
* END iwl-csr.h
*/
/*
* BEGIN iwl-fw.h
*/
/**
* enum iwm_ucode_tlv_flag - ucode API flags
* @IWM_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
* was a separate TLV but moved here to save space.
* @IWM_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
* treats good CRC threshold as a boolean
* @IWM_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
* @IWM_UCODE_TLV_FLAGS_UAPSD: This uCode image supports uAPSD
* @IWM_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
* offload profile config command.
* @IWM_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
* (rather than two) IPv6 addresses
* @IWM_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
* from the probe request template.
* @IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
* @IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
* @IWM_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
* @IWM_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
* @IWM_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
* @IWM_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
*/
enum iwm_ucode_tlv_flag {
IWM_UCODE_TLV_FLAGS_PAN = (1 << 0),
IWM_UCODE_TLV_FLAGS_NEWSCAN = (1 << 1),
IWM_UCODE_TLV_FLAGS_MFP = (1 << 2),
IWM_UCODE_TLV_FLAGS_SHORT_BL = (1 << 7),
IWM_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = (1 << 10),
IWM_UCODE_TLV_FLAGS_NO_BASIC_SSID = (1 << 12),
IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = (1 << 15),
IWM_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = (1 << 16),
IWM_UCODE_TLV_FLAGS_UAPSD_SUPPORT = (1 << 24),
IWM_UCODE_TLV_FLAGS_EBS_SUPPORT = (1 << 25),
IWM_UCODE_TLV_FLAGS_P2P_PS_UAPSD = (1 << 26),
IWM_UCODE_TLV_FLAGS_BCAST_FILTERING = (1 << 29),
};
#define IWM_UCODE_TLV_FLAG_BITS \
"\020\1PAN\2NEWSCAN\3MFP\4P2P\5DW_BC_TABLE\6NEWBT_COEX\7PM_CMD\10SHORT_BL\11RX_ENERG \
Y\12TIME_EVENT_V2\13D3_6_IPV6\14BF_UPDATED\15NO_BASIC_SSID\17D3_CONTINUITY\20NEW_NSOFF \
L_S\21NEW_NSOFFL_L\22SCHED_SCAN\24STA_KEY_CMD\25DEVICE_PS_CMD\26P2P_PS\27P2P_PS_DCM\30 \
P2P_PS_SCM\31UAPSD_SUPPORT\32EBS\33P2P_PS_UAPSD\36BCAST_FILTERING\37GO_UAPSD\40LTE_COEX"
/**
* enum iwm_ucode_tlv_api - ucode api
* @IWM_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
* longer than the passive one, which is essential for fragmented scan.
* @IWM_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
* @IWM_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params
*
* @IWM_NUM_UCODE_TLV_API: number of bits used
*/
enum iwm_ucode_tlv_api {
IWM_UCODE_TLV_API_FRAGMENTED_SCAN = 8,
IWM_UCODE_TLV_API_WIFI_MCC_UPDATE = 9,
IWM_UCODE_TLV_API_LQ_SS_PARAMS = 18,
IWM_NUM_UCODE_TLV_API = 32
};
#define IWM_UCODE_TLV_API_BITS \
"\020\10FRAGMENTED_SCAN\11WIFI_MCC_UPDATE\16WIDE_CMD_HDR\22LQ_SS_PARAMS\30EXT_SCAN_PRIO\33TX_POWER_CHAIN"
/**
* enum iwm_ucode_tlv_capa - ucode capabilities
* @IWM_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
* @IWM_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
* @IWM_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
* @IWM_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
* @IWM_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM)
* @IWM_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
* @IWM_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
* tx power value into TPC Report action frame and Link Measurement Report
* action frame
* @IWM_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
* channel in DS parameter set element in probe requests.
* @IWM_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
* probe requests.
* @IWM_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
* @IWM_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
* which also implies support for the scheduler configuration command
* @IWM_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
* @IWM_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG: Consolidated D3-D0 image
* @IWM_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
* @IWM_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command
* @IWM_UCODE_TLV_CAPA_2G_COEX_SUPPORT: supports 2G coex Command
* @IWM_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload
* @IWM_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics
* @IWM_UCODE_TLV_CAPA_P2P_STANDALONE_UAPSD: support p2p standalone U-APSD
* @IWM_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running
* @IWM_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different
* sources for the MCC. This TLV bit is a future replacement to
* IWM_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
* is supported.
* @IWM_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
* @IWM_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan
* @IWM_UCODE_TLV_CAPA_NAN_SUPPORT: supports NAN
* @IWM_UCODE_TLV_CAPA_UMAC_UPLOAD: supports upload mode in umac (1=supported,
* 0=no support)
* @IWM_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement
* @IWM_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts
* @IWM_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT
* @IWM_UCODE_TLV_CAPA_BEACON_ANT_SELECTION: firmware will decide on what
* antenna the beacon should be transmitted
* @IWM_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon
* from AP and will send it upon d0i3 exit.
* @IWM_UCODE_TLV_CAPA_LAR_SUPPORT_V2: support LAR API V2
* @IWM_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill
* @IWM_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature
* thresholds reporting
* @IWM_UCODE_TLV_CAPA_CTDP_SUPPORT: supports cTDP command
* @IWM_UCODE_TLV_CAPA_USNIFFER_UNIFIED: supports usniffer enabled in
* regular image.
* @IWM_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG: support getting more shared
* memory addresses from the firmware.
* @IWM_UCODE_TLV_CAPA_LQM_SUPPORT: supports Link Quality Measurement
* @IWM_UCODE_TLV_CAPA_TX_POWER_ACK: reduced TX power API has larger
* command size (command version 4) that supports toggling ACK TX
* power reduction.
*
* @IWM_NUM_UCODE_TLV_CAPA: number of bits used
*/
enum iwm_ucode_tlv_capa {
IWM_UCODE_TLV_CAPA_D0I3_SUPPORT = 0,
IWM_UCODE_TLV_CAPA_LAR_SUPPORT = 1,
IWM_UCODE_TLV_CAPA_UMAC_SCAN = 2,
IWM_UCODE_TLV_CAPA_BEAMFORMER = 3,
IWM_UCODE_TLV_CAPA_TOF_SUPPORT = 5,
IWM_UCODE_TLV_CAPA_TDLS_SUPPORT = 6,
IWM_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = 8,
IWM_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = 9,
IWM_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = 10,
IWM_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = 11,
IWM_UCODE_TLV_CAPA_DQA_SUPPORT = 12,
IWM_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = 13,
IWM_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG = 17,
IWM_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = 18,
IWM_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT = 19,
IWM_UCODE_TLV_CAPA_2G_COEX_SUPPORT = 20,
IWM_UCODE_TLV_CAPA_CSUM_SUPPORT = 21,
IWM_UCODE_TLV_CAPA_RADIO_BEACON_STATS = 22,
IWM_UCODE_TLV_CAPA_P2P_STANDALONE_UAPSD = 26,
IWM_UCODE_TLV_CAPA_BT_COEX_PLCR = 28,
IWM_UCODE_TLV_CAPA_LAR_MULTI_MCC = 29,
IWM_UCODE_TLV_CAPA_BT_COEX_RRC = 30,
IWM_UCODE_TLV_CAPA_GSCAN_SUPPORT = 31,
IWM_UCODE_TLV_CAPA_NAN_SUPPORT = 34,
IWM_UCODE_TLV_CAPA_UMAC_UPLOAD = 35,
IWM_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE = 64,
IWM_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS = 65,
IWM_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT = 67,
IWM_UCODE_TLV_CAPA_MULTI_QUEUE_RX_SUPPORT = 68,
IWM_UCODE_TLV_CAPA_BEACON_ANT_SELECTION = 71,
IWM_UCODE_TLV_CAPA_BEACON_STORING = 72,
IWM_UCODE_TLV_CAPA_LAR_SUPPORT_V2 = 73,
IWM_UCODE_TLV_CAPA_CT_KILL_BY_FW = 74,
IWM_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT = 75,
IWM_UCODE_TLV_CAPA_CTDP_SUPPORT = 76,
IWM_UCODE_TLV_CAPA_USNIFFER_UNIFIED = 77,
IWM_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG = 80,
IWM_UCODE_TLV_CAPA_LQM_SUPPORT = 81,
IWM_UCODE_TLV_CAPA_TX_POWER_ACK = 84,
IWM_NUM_UCODE_TLV_CAPA = 128
};
/* The default calibrate table size if not specified by firmware file */
#define IWM_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
#define IWM_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19
#define IWM_MAX_PHY_CALIBRATE_TBL_SIZE 253
/* The default max probe length if not specified by the firmware file */
#define IWM_DEFAULT_MAX_PROBE_LENGTH 200
/*
* enumeration of ucode section.
* This enumeration is used directly for older firmware (before 16.0).
* For new firmware, there can be up to 4 sections (see below) but the
* first one packaged into the firmware file is the DATA section and
* some debugging code accesses that.
*/
enum iwm_ucode_sec {
IWM_UCODE_SECTION_DATA,
IWM_UCODE_SECTION_INST,
};
/*
* For 16.0 uCode and above, there is no differentiation between sections,
* just an offset to the HW address.
*/
#define IWM_CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC
#define IWM_PAGING_SEPARATOR_SECTION 0xAAAABBBB
/* uCode version contains 4 values: Major/Minor/API/Serial */
#define IWM_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
#define IWM_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
#define IWM_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
#define IWM_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
/*
* Calibration control struct.
* Sent as part of the phy configuration command.
* @flow_trigger: bitmap for which calibrations to perform according to
* flow triggers.
* @event_trigger: bitmap for which calibrations to perform according to
* event triggers.
*/
struct iwm_tlv_calib_ctrl {
uint32_t flow_trigger;
uint32_t event_trigger;
} __packed;
enum iwm_fw_phy_cfg {
IWM_FW_PHY_CFG_RADIO_TYPE_POS = 0,
IWM_FW_PHY_CFG_RADIO_TYPE = 0x3 << IWM_FW_PHY_CFG_RADIO_TYPE_POS,
IWM_FW_PHY_CFG_RADIO_STEP_POS = 2,
IWM_FW_PHY_CFG_RADIO_STEP = 0x3 << IWM_FW_PHY_CFG_RADIO_STEP_POS,
IWM_FW_PHY_CFG_RADIO_DASH_POS = 4,
IWM_FW_PHY_CFG_RADIO_DASH = 0x3 << IWM_FW_PHY_CFG_RADIO_DASH_POS,
IWM_FW_PHY_CFG_TX_CHAIN_POS = 16,
IWM_FW_PHY_CFG_TX_CHAIN = 0xf << IWM_FW_PHY_CFG_TX_CHAIN_POS,
IWM_FW_PHY_CFG_RX_CHAIN_POS = 20,
IWM_FW_PHY_CFG_RX_CHAIN = 0xf << IWM_FW_PHY_CFG_RX_CHAIN_POS,
};
#define IWM_UCODE_MAX_CS 1
/**
* struct iwm_fw_cipher_scheme - a cipher scheme supported by FW.
* @cipher: a cipher suite selector
* @flags: cipher scheme flags (currently reserved for a future use)
* @hdr_len: a size of MPDU security header
* @pn_len: a size of PN
* @pn_off: an offset of pn from the beginning of the security header
* @key_idx_off: an offset of key index byte in the security header
* @key_idx_mask: a bit mask of key_idx bits
* @key_idx_shift: bit shift needed to get key_idx
* @mic_len: mic length in bytes
* @hw_cipher: a HW cipher index used in host commands
*/
struct iwm_fw_cipher_scheme {
uint32_t cipher;
uint8_t flags;
uint8_t hdr_len;
uint8_t pn_len;
uint8_t pn_off;
uint8_t key_idx_off;
uint8_t key_idx_mask;
uint8_t key_idx_shift;
uint8_t mic_len;
uint8_t hw_cipher;
} __packed;
/**
* struct iwm_fw_cscheme_list - a cipher scheme list
* @size: a number of entries
* @cs: cipher scheme entries
*/
struct iwm_fw_cscheme_list {
uint8_t size;
struct iwm_fw_cipher_scheme cs[];
} __packed;
/*
* END iwl-fw.h
*/
/*
* BEGIN iwl-fw-file.h
*/
/* v1/v2 uCode file layout */
struct iwm_ucode_header {
uint32_t ver; /* major/minor/API/serial */
union {
struct {
uint32_t inst_size; /* bytes of runtime code */
uint32_t data_size; /* bytes of runtime data */
uint32_t init_size; /* bytes of init code */
uint32_t init_data_size; /* bytes of init data */
uint32_t boot_size; /* bytes of bootstrap code */
uint8_t data[0]; /* in same order as sizes */
} v1;
struct {
uint32_t build; /* build number */
uint32_t inst_size; /* bytes of runtime code */
uint32_t data_size; /* bytes of runtime data */
uint32_t init_size; /* bytes of init code */
uint32_t init_data_size; /* bytes of init data */
uint32_t boot_size; /* bytes of bootstrap code */
uint8_t data[0]; /* in same order as sizes */
} v2;
} u;
};
/*
* new TLV uCode file layout
*
* The new TLV file format contains TLVs, that each specify
* some piece of data.
*/
enum iwm_ucode_tlv_type {
IWM_UCODE_TLV_INVALID = 0, /* unused */
IWM_UCODE_TLV_INST = 1,
IWM_UCODE_TLV_DATA = 2,
IWM_UCODE_TLV_INIT = 3,
IWM_UCODE_TLV_INIT_DATA = 4,
IWM_UCODE_TLV_BOOT = 5,
IWM_UCODE_TLV_PROBE_MAX_LEN = 6, /* a uint32_t value */
IWM_UCODE_TLV_PAN = 7,
IWM_UCODE_TLV_RUNT_EVTLOG_PTR = 8,
IWM_UCODE_TLV_RUNT_EVTLOG_SIZE = 9,
IWM_UCODE_TLV_RUNT_ERRLOG_PTR = 10,
IWM_UCODE_TLV_INIT_EVTLOG_PTR = 11,
IWM_UCODE_TLV_INIT_EVTLOG_SIZE = 12,
IWM_UCODE_TLV_INIT_ERRLOG_PTR = 13,
IWM_UCODE_TLV_ENHANCE_SENS_TBL = 14,
IWM_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
IWM_UCODE_TLV_WOWLAN_INST = 16,
IWM_UCODE_TLV_WOWLAN_DATA = 17,
IWM_UCODE_TLV_FLAGS = 18,
IWM_UCODE_TLV_SEC_RT = 19,
IWM_UCODE_TLV_SEC_INIT = 20,
IWM_UCODE_TLV_SEC_WOWLAN = 21,
IWM_UCODE_TLV_DEF_CALIB = 22,
IWM_UCODE_TLV_PHY_SKU = 23,
IWM_UCODE_TLV_SECURE_SEC_RT = 24,
IWM_UCODE_TLV_SECURE_SEC_INIT = 25,
IWM_UCODE_TLV_SECURE_SEC_WOWLAN = 26,
IWM_UCODE_TLV_NUM_OF_CPU = 27,
IWM_UCODE_TLV_CSCHEME = 28,
/*
* Following two are not in our base tag, but allow
* handling ucode version 9.
*/
IWM_UCODE_TLV_API_CHANGES_SET = 29,
IWM_UCODE_TLV_ENABLED_CAPABILITIES = 30,
IWM_UCODE_TLV_N_SCAN_CHANNELS = 31,
IWM_UCODE_TLV_PAGING = 32,
IWM_UCODE_TLV_SEC_RT_USNIFFER = 34,
IWM_UCODE_TLV_SDIO_ADMA_ADDR = 35,
IWM_UCODE_TLV_FW_VERSION = 36,
IWM_UCODE_TLV_FW_DBG_DEST = 38,
IWM_UCODE_TLV_FW_DBG_CONF = 39,
IWM_UCODE_TLV_FW_DBG_TRIGGER = 40,
IWM_UCODE_TLV_FW_GSCAN_CAPA = 50,
IWM_UCODE_TLV_FW_MEM_SEG = 51,
};
struct iwm_ucode_tlv {
uint32_t type; /* see above */
uint32_t length; /* not including type/length fields */
uint8_t data[0];
};
struct iwm_ucode_api {
uint32_t api_index;
uint32_t api_flags;
} __packed;
struct iwm_ucode_capa {
uint32_t api_index;
uint32_t api_capa;
} __packed;
#define IWM_TLV_UCODE_MAGIC 0x0a4c5749
struct iwm_tlv_ucode_header {
/*
* The TLV style ucode header is distinguished from
* the v1/v2 style header by first four bytes being
* zero, as such is an invalid combination of
* major/minor/API/serial versions.
*/
uint32_t zero;
uint32_t magic;
uint8_t human_readable[64];
uint32_t ver; /* major/minor/API/serial */
uint32_t build;
uint64_t ignore;
/*
* The data contained herein has a TLV layout,
* see above for the TLV header and types.
* Note that each TLV is padded to a length
* that is a multiple of 4 for alignment.
*/
uint8_t data[0];
};
/*
* END iwl-fw-file.h
*/
/*
* BEGIN iwl-prph.h
*/
/*
* Registers in this file are internal, not PCI bus memory mapped.
* Driver accesses these via IWM_HBUS_TARG_PRPH_* registers.
*/
#define IWM_PRPH_BASE (0x00000)
#define IWM_PRPH_END (0xFFFFF)
/* APMG (power management) constants */
#define IWM_APMG_BASE (IWM_PRPH_BASE + 0x3000)
#define IWM_APMG_CLK_CTRL_REG (IWM_APMG_BASE + 0x0000)
#define IWM_APMG_CLK_EN_REG (IWM_APMG_BASE + 0x0004)
#define IWM_APMG_CLK_DIS_REG (IWM_APMG_BASE + 0x0008)
#define IWM_APMG_PS_CTRL_REG (IWM_APMG_BASE + 0x000c)
#define IWM_APMG_PCIDEV_STT_REG (IWM_APMG_BASE + 0x0010)
#define IWM_APMG_RFKILL_REG (IWM_APMG_BASE + 0x0014)
#define IWM_APMG_RTC_INT_STT_REG (IWM_APMG_BASE + 0x001c)
#define IWM_APMG_RTC_INT_MSK_REG (IWM_APMG_BASE + 0x0020)
#define IWM_APMG_DIGITAL_SVR_REG (IWM_APMG_BASE + 0x0058)
#define IWM_APMG_ANALOG_SVR_REG (IWM_APMG_BASE + 0x006C)
#define IWM_APMS_CLK_VAL_MRB_FUNC_MODE (0x00000001)
#define IWM_APMG_CLK_VAL_DMA_CLK_RQT (0x00000200)
#define IWM_APMG_CLK_VAL_BSM_CLK_RQT (0x00000800)
#define IWM_APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000)
#define IWM_APMG_PS_CTRL_VAL_RESET_REQ (0x04000000)
#define IWM_APMG_PS_CTRL_MSK_PWR_SRC (0x03000000)
#define IWM_APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
#define IWM_APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000)
#define IWM_APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */
#define IWM_APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060)
#define IWM_APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
#define IWM_APMG_RTC_INT_STT_RFKILL (0x10000000)
/* Device system time */
#define IWM_DEVICE_SYSTEM_TIME_REG 0xA0206C
/* Device NMI register */
#define IWM_DEVICE_SET_NMI_REG 0x00a01c30
#define IWM_DEVICE_SET_NMI_VAL_HW 0x01
#define IWM_DEVICE_SET_NMI_VAL_DRV 0x80
#define IWM_DEVICE_SET_NMI_8000_REG 0x00a01c24
#define IWM_DEVICE_SET_NMI_8000_VAL 0x1000000
/*
* Device reset for family 8000
* write to bit 24 in order to reset the CPU
*/
#define IWM_RELEASE_CPU_RESET 0x300c
#define IWM_RELEASE_CPU_RESET_BIT 0x1000000
/*****************************************************************************
* 7000/3000 series SHR DTS addresses *
*****************************************************************************/
#define IWM_SHR_MISC_WFM_DTS_EN (0x00a10024)
#define IWM_DTSC_CFG_MODE (0x00a10604)
#define IWM_DTSC_VREF_AVG (0x00a10648)
#define IWM_DTSC_VREF5_AVG (0x00a1064c)
#define IWM_DTSC_CFG_MODE_PERIODIC (0x2)
#define IWM_DTSC_PTAT_AVG (0x00a10650)
/**
* Tx Scheduler
*
* The Tx Scheduler selects the next frame to be transmitted, choosing TFDs
* (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in
* host DRAM. It steers each frame's Tx command (which contains the frame
* data) into one of up to 7 prioritized Tx DMA FIFO channels within the
* device. A queue maps to only one (selectable by driver) Tx DMA channel,
* but one DMA channel may take input from several queues.
*
* Tx DMA FIFOs have dedicated purposes.
*
* For 5000 series and up, they are used differently
* (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c):
*
* 0 -- EDCA BK (background) frames, lowest priority
* 1 -- EDCA BE (best effort) frames, normal priority
* 2 -- EDCA VI (video) frames, higher priority
* 3 -- EDCA VO (voice) and management frames, highest priority
* 4 -- unused
* 5 -- unused
* 6 -- unused
* 7 -- Commands
*
* Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6.
* In addition, driver can map the remaining queues to Tx DMA/FIFO
* channels 0-3 to support 11n aggregation via EDCA DMA channels.
*
* The driver sets up each queue to work in one of two modes:
*
* 1) Scheduler-Ack, in which the scheduler automatically supports a
* block-ack (BA) window of up to 64 TFDs. In this mode, each queue
* contains TFDs for a unique combination of Recipient Address (RA)
* and Traffic Identifier (TID), that is, traffic of a given
* Quality-Of-Service (QOS) priority, destined for a single station.
*
* In scheduler-ack mode, the scheduler keeps track of the Tx status of
* each frame within the BA window, including whether it's been transmitted,
* and whether it's been acknowledged by the receiving station. The device
* automatically processes block-acks received from the receiving STA,
* and reschedules un-acked frames to be retransmitted (successful
* Tx completion may end up being out-of-order).
*
* The driver must maintain the queue's Byte Count table in host DRAM
* for this mode.
* This mode does not support fragmentation.
*
* 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order.
* The device may automatically retry Tx, but will retry only one frame
* at a time, until receiving ACK from receiving station, or reaching
* retry limit and giving up.
*
* The command queue (#4/#9) must use this mode!
* This mode does not require use of the Byte Count table in host DRAM.
*
* Driver controls scheduler operation via 3 means:
* 1) Scheduler registers
* 2) Shared scheduler data base in internal SRAM
* 3) Shared data in host DRAM
*
* Initialization:
*
* When loading, driver should allocate memory for:
* 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs.
* 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory
* (1024 bytes for each queue).
*
* After receiving "Alive" response from uCode, driver must initialize
* the scheduler (especially for queue #4/#9, the command queue, otherwise
* the driver can't issue commands!):
*/
#define IWM_SCD_MEM_LOWER_BOUND (0x0000)
/**
* Max Tx window size is the max number of contiguous TFDs that the scheduler
* can keep track of at one time when creating block-ack chains of frames.
* Note that "64" matches the number of ack bits in a block-ack packet.
*/
#define IWM_SCD_WIN_SIZE 64
#define IWM_SCD_FRAME_LIMIT 64
#define IWM_SCD_TXFIFO_POS_TID (0)
#define IWM_SCD_TXFIFO_POS_RA (4)
#define IWM_SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF)
/* agn SCD */
#define IWM_SCD_QUEUE_STTS_REG_POS_TXF (0)
#define IWM_SCD_QUEUE_STTS_REG_POS_ACTIVE (3)
#define IWM_SCD_QUEUE_STTS_REG_POS_WSL (4)
#define IWM_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19)
#define IWM_SCD_QUEUE_STTS_REG_MSK (0x017F0000)
#define IWM_SCD_QUEUE_CTX_REG1_CREDIT_POS (8)
#define IWM_SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00)
#define IWM_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24)
#define IWM_SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000)
#define IWM_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS (0)
#define IWM_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK (0x0000007F)
#define IWM_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16)
#define IWM_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000)
#define IWM_SCD_GP_CTRL_ENABLE_31_QUEUES (1 << 0)
#define IWM_SCD_GP_CTRL_AUTO_ACTIVE_MODE (1 << 18)
/* Context Data */
#define IWM_SCD_CONTEXT_MEM_LOWER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x600)
#define IWM_SCD_CONTEXT_MEM_UPPER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x6A0)
/* Tx status */
#define IWM_SCD_TX_STTS_MEM_LOWER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x6A0)
#define IWM_SCD_TX_STTS_MEM_UPPER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x7E0)
/* Translation Data */
#define IWM_SCD_TRANS_TBL_MEM_LOWER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x7E0)
#define IWM_SCD_TRANS_TBL_MEM_UPPER_BOUND (IWM_SCD_MEM_LOWER_BOUND + 0x808)
#define IWM_SCD_CONTEXT_QUEUE_OFFSET(x)\
(IWM_SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8))
#define IWM_SCD_TX_STTS_QUEUE_OFFSET(x)\
(IWM_SCD_TX_STTS_MEM_LOWER_BOUND + ((x) * 16))
#define IWM_SCD_TRANS_TBL_OFFSET_QUEUE(x) \
((IWM_SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc)
#define IWM_SCD_BASE (IWM_PRPH_BASE + 0xa02c00)
#define IWM_SCD_SRAM_BASE_ADDR (IWM_SCD_BASE + 0x0)
#define IWM_SCD_DRAM_BASE_ADDR (IWM_SCD_BASE + 0x8)
#define IWM_SCD_AIT (IWM_SCD_BASE + 0x0c)
#define IWM_SCD_TXFACT (IWM_SCD_BASE + 0x10)
#define IWM_SCD_ACTIVE (IWM_SCD_BASE + 0x14)
#define IWM_SCD_QUEUECHAIN_SEL (IWM_SCD_BASE + 0xe8)
#define IWM_SCD_CHAINEXT_EN (IWM_SCD_BASE + 0x244)
#define IWM_SCD_AGGR_SEL (IWM_SCD_BASE + 0x248)
#define IWM_SCD_INTERRUPT_MASK (IWM_SCD_BASE + 0x108)
#define IWM_SCD_GP_CTRL (IWM_SCD_BASE + 0x1a8)
#define IWM_SCD_EN_CTRL (IWM_SCD_BASE + 0x254)
static inline unsigned int IWM_SCD_QUEUE_WRPTR(unsigned int chnl)
{
if (chnl < 20)
return IWM_SCD_BASE + 0x18 + chnl * 4;
return IWM_SCD_BASE + 0x284 + (chnl - 20) * 4;
}
static inline unsigned int IWM_SCD_QUEUE_RDPTR(unsigned int chnl)
{
if (chnl < 20)
return IWM_SCD_BASE + 0x68 + chnl * 4;
return IWM_SCD_BASE + 0x2B4 + (chnl - 20) * 4;
}
static inline unsigned int IWM_SCD_QUEUE_STATUS_BITS(unsigned int chnl)
{
if (chnl < 20)
return IWM_SCD_BASE + 0x10c + chnl * 4;
return IWM_SCD_BASE + 0x384 + (chnl - 20) * 4;
}
/*********************** END TX SCHEDULER *************************************/
/* Oscillator clock */
#define IWM_OSC_CLK (0xa04068)
#define IWM_OSC_CLK_FORCE_CONTROL (0x8)
/*
* END iwl-prph.h
*/
/*
* BEGIN iwl-fh.h
*/
/****************************/
/* Flow Handler Definitions */
/****************************/
/**
* This I/O area is directly read/writable by driver (e.g. Linux uses writel())
* Addresses are offsets from device's PCI hardware base address.
*/
#define IWM_FH_MEM_LOWER_BOUND (0x1000)
#define IWM_FH_MEM_UPPER_BOUND (0x2000)
/**
* Keep-Warm (KW) buffer base address.
*
* Driver must allocate a 4KByte buffer that is for keeping the
* host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency
* DRAM access when doing Txing or Rxing. The dummy accesses prevent host
* from going into a power-savings mode that would cause higher DRAM latency,
* and possible data over/under-runs, before all Tx/Rx is complete.
*
* Driver loads IWM_FH_KW_MEM_ADDR_REG with the physical address (bits 35:4)
* of the buffer, which must be 4K aligned. Once this is set up, the device
* automatically invokes keep-warm accesses when normal accesses might not
* be sufficient to maintain fast DRAM response.
*
* Bit fields:
* 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned
*/
#define IWM_FH_KW_MEM_ADDR_REG (IWM_FH_MEM_LOWER_BOUND + 0x97C)
/**
* TFD Circular Buffers Base (CBBC) addresses
*
* Device has 16 base pointer registers, one for each of 16 host-DRAM-resident
* circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs)
* (see struct iwm_tfd_frame). These 16 pointer registers are offset by 0x04
* bytes from one another. Each TFD circular buffer in DRAM must be 256-byte
* aligned (address bits 0-7 must be 0).
* Later devices have 20 (5000 series) or 30 (higher) queues, but the registers
* for them are in different places.
*
* Bit fields in each pointer register:
* 27-0: TFD CB physical base address [35:8], must be 256-byte aligned
*/
#define IWM_FH_MEM_CBBC_0_15_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x9D0)
#define IWM_FH_MEM_CBBC_0_15_UPPER_BOUN (IWM_FH_MEM_LOWER_BOUND + 0xA10)
#define IWM_FH_MEM_CBBC_16_19_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xBF0)
#define IWM_FH_MEM_CBBC_16_19_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xC00)
#define IWM_FH_MEM_CBBC_20_31_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xB20)
#define IWM_FH_MEM_CBBC_20_31_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xB80)
/* Find TFD CB base pointer for given queue */
static inline unsigned int IWM_FH_MEM_CBBC_QUEUE(unsigned int chnl)
{
if (chnl < 16)
return IWM_FH_MEM_CBBC_0_15_LOWER_BOUND + 4 * chnl;
if (chnl < 20)
return IWM_FH_MEM_CBBC_16_19_LOWER_BOUND + 4 * (chnl - 16);
return IWM_FH_MEM_CBBC_20_31_LOWER_BOUND + 4 * (chnl - 20);
}
/**
* Rx SRAM Control and Status Registers (RSCSR)
*
* These registers provide handshake between driver and device for the Rx queue
* (this queue handles *all* command responses, notifications, Rx data, etc.
* sent from uCode to host driver). Unlike Tx, there is only one Rx
* queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can
* concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer
* Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1
* mapping between RBDs and RBs.
*
* Driver must allocate host DRAM memory for the following, and set the
* physical address of each into device registers:
*
* 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256
* entries (although any power of 2, up to 4096, is selectable by driver).
* Each entry (1 dword) points to a receive buffer (RB) of consistent size
* (typically 4K, although 8K or 16K are also selectable by driver).
* Driver sets up RB size and number of RBDs in the CB via Rx config
* register IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG.
*
* Bit fields within one RBD:
* 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned
*
* Driver sets physical address [35:8] of base of RBD circular buffer
* into IWM_FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0].
*
* 2) Rx status buffer, 8 bytes, in which uCode indicates which Rx Buffers
* (RBs) have been filled, via a "write pointer", actually the index of
* the RB's corresponding RBD within the circular buffer. Driver sets
* physical address [35:4] into IWM_FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0].
*
* Bit fields in lower dword of Rx status buffer (upper dword not used
* by driver:
* 31-12: Not used by driver
* 11- 0: Index of last filled Rx buffer descriptor
* (device writes, driver reads this value)
*
* As the driver prepares Receive Buffers (RBs) for device to fill, driver must
* enter pointers to these RBs into contiguous RBD circular buffer entries,
* and update the device's "write" index register,
* IWM_FH_RSCSR_CHNL0_RBDCB_WPTR_REG.
*
* This "write" index corresponds to the *next* RBD that the driver will make
* available, i.e. one RBD past the tail of the ready-to-fill RBDs within
* the circular buffer. This value should initially be 0 (before preparing any
* RBs), should be 8 after preparing the first 8 RBs (for example), and must
* wrap back to 0 at the end of the circular buffer (but don't wrap before
* "read" index has advanced past 1! See below).
* NOTE: DEVICE EXPECTS THE WRITE INDEX TO BE INCREMENTED IN MULTIPLES OF 8.
*
* As the device fills RBs (referenced from contiguous RBDs within the circular
* buffer), it updates the Rx status buffer in host DRAM, 2) described above,
* to tell the driver the index of the latest filled RBD. The driver must
* read this "read" index from DRAM after receiving an Rx interrupt from device
*
* The driver must also internally keep track of a third index, which is the
* next RBD to process. When receiving an Rx interrupt, driver should process
* all filled but unprocessed RBs up to, but not including, the RB
* corresponding to the "read" index. For example, if "read" index becomes "1",
* driver may process the RB pointed to by RBD 0. Depending on volume of
* traffic, there may be many RBs to process.
*
* If read index == write index, device thinks there is no room to put new data.
* Due to this, the maximum number of filled RBs is 255, instead of 256. To
* be safe, make sure that there is a gap of at least 2 RBDs between "write"
* and "read" indexes; that is, make sure that there are no more than 254
* buffers waiting to be filled.
*/
#define IWM_FH_MEM_RSCSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xBC0)
#define IWM_FH_MEM_RSCSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xC00)
#define IWM_FH_MEM_RSCSR_CHNL0 (IWM_FH_MEM_RSCSR_LOWER_BOUND)
/**
* Physical base address of 8-byte Rx Status buffer.
* Bit fields:
* 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned.
*/
#define IWM_FH_RSCSR_CHNL0_STTS_WPTR_REG (IWM_FH_MEM_RSCSR_CHNL0)
/**
* Physical base address of Rx Buffer Descriptor Circular Buffer.
* Bit fields:
* 27-0: RBD CD physical base address [35:8], must be 256-byte aligned.
*/
#define IWM_FH_RSCSR_CHNL0_RBDCB_BASE_REG (IWM_FH_MEM_RSCSR_CHNL0 + 0x004)
/**
* Rx write pointer (index, really!).
* Bit fields:
* 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1.
* NOTE: For 256-entry circular buffer, use only bits [7:0].
*/
#define IWM_FH_RSCSR_CHNL0_RBDCB_WPTR_REG (IWM_FH_MEM_RSCSR_CHNL0 + 0x008)
#define IWM_FH_RSCSR_CHNL0_WPTR (IWM_FH_RSCSR_CHNL0_RBDCB_WPTR_REG)
#define IWM_FW_RSCSR_CHNL0_RXDCB_RDPTR_REG (IWM_FH_MEM_RSCSR_CHNL0 + 0x00c)
#define IWM_FH_RSCSR_CHNL0_RDPTR IWM_FW_RSCSR_CHNL0_RXDCB_RDPTR_REG
/**
* Rx Config/Status Registers (RCSR)
* Rx Config Reg for channel 0 (only channel used)
*
* Driver must initialize IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for
* normal operation (see bit fields).
*
* Clearing IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA.
* Driver should poll IWM_FH_MEM_RSSR_RX_STATUS_REG for
* IWM_FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing.
*
* Bit fields:
* 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame,
* '10' operate normally
* 29-24: reserved
* 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal),
* min "5" for 32 RBDs, max "12" for 4096 RBDs.
* 19-18: reserved
* 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K,
* '10' 12K, '11' 16K.
* 15-14: reserved
* 13-12: IRQ destination; '00' none, '01' host driver (normal operation)
* 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec)
* typical value 0x10 (about 1/2 msec)
* 3- 0: reserved
*/
#define IWM_FH_MEM_RCSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xC00)
#define IWM_FH_MEM_RCSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xCC0)
#define IWM_FH_MEM_RCSR_CHNL0 (IWM_FH_MEM_RCSR_LOWER_BOUND)
#define IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG (IWM_FH_MEM_RCSR_CHNL0)
#define IWM_FH_MEM_RCSR_CHNL0_RBDCB_WPTR (IWM_FH_MEM_RCSR_CHNL0 + 0x8)
#define IWM_FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ (IWM_FH_MEM_RCSR_CHNL0 + 0x10)
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/
#define IWM_FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20)
#define IWM_FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4)
#define IWM_RX_RB_TIMEOUT (0x11)
#define IWM_FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000)
#define IWM_FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000)
#define IWM_FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000)
#define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000)
#define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000)
#define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000)
#define IWM_FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000)
#define IWM_FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004)
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000)
#define IWM_FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000)
/**
* Rx Shared Status Registers (RSSR)
*
* After stopping Rx DMA channel (writing 0 to
* IWM_FH_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll
* IWM_FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle.
*
* Bit fields:
* 24: 1 = Channel 0 is idle
*
* IWM_FH_MEM_RSSR_SHARED_CTRL_REG and IWM_FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV
* contain default values that should not be altered by the driver.
*/
#define IWM_FH_MEM_RSSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xC40)
#define IWM_FH_MEM_RSSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xD00)
#define IWM_FH_MEM_RSSR_SHARED_CTRL_REG (IWM_FH_MEM_RSSR_LOWER_BOUND)
#define IWM_FH_MEM_RSSR_RX_STATUS_REG (IWM_FH_MEM_RSSR_LOWER_BOUND + 0x004)
#define IWM_FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\
(IWM_FH_MEM_RSSR_LOWER_BOUND + 0x008)
#define IWM_FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000)
#define IWM_FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28
/* TFDB Area - TFDs buffer table */
#define IWM_FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF)
#define IWM_FH_TFDIB_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x900)
#define IWM_FH_TFDIB_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x958)
#define IWM_FH_TFDIB_CTRL0_REG(_chnl) (IWM_FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl))
#define IWM_FH_TFDIB_CTRL1_REG(_chnl) (IWM_FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4)
/**
* Transmit DMA Channel Control/Status Registers (TCSR)
*
* Device has one configuration register for each of 8 Tx DMA/FIFO channels
* supported in hardware (don't confuse these with the 16 Tx queues in DRAM,
* which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes.
*
* To use a Tx DMA channel, driver must initialize its
* IWM_FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with:
*
* IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
* IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL
*
* All other bits should be 0.
*
* Bit fields:
* 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame,
* '10' operate normally
* 29- 4: Reserved, set to "0"
* 3: Enable internal DMA requests (1, normal operation), disable (0)
* 2- 0: Reserved, set to "0"
*/
#define IWM_FH_TCSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xD00)
#define IWM_FH_TCSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xE60)
/* Find Control/Status reg for given Tx DMA/FIFO channel */
#define IWM_FH_TCSR_CHNL_NUM (8)
/* TCSR: tx_config register values */
#define IWM_FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \
(IWM_FH_TCSR_LOWER_BOUND + 0x20 * (_chnl))
#define IWM_FH_TCSR_CHNL_TX_CREDIT_REG(_chnl) \
(IWM_FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4)
#define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \
(IWM_FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV (0x00000001)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE (0x00000000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE (0x00000008)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD (0x00400000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD (0x00800000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000)
#define IWM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000)
#define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000)
#define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000)
#define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003)
#define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20)
#define IWM_FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12)
/**
* Tx Shared Status Registers (TSSR)
*
* After stopping Tx DMA channel (writing 0 to
* IWM_FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll
* IWM_FH_TSSR_TX_STATUS_REG until selected Tx channel is idle
* (channel's buffers empty | no pending requests).
*
* Bit fields:
* 31-24: 1 = Channel buffers empty (channel 7:0)
* 23-16: 1 = No pending requests (channel 7:0)
*/
#define IWM_FH_TSSR_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xEA0)
#define IWM_FH_TSSR_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0xEC0)
#define IWM_FH_TSSR_TX_STATUS_REG (IWM_FH_TSSR_LOWER_BOUND + 0x010)
/**
* Bit fields for TSSR(Tx Shared Status & Control) error status register:
* 31: Indicates an address error when accessed to internal memory
* uCode/driver must write "1" in order to clear this flag
* 30: Indicates that Host did not send the expected number of dwords to FH
* uCode/driver must write "1" in order to clear this flag
* 16-9:Each status bit is for one channel. Indicates that an (Error) ActDMA
* command was received from the scheduler while the TRB was already full
* with previous command
* uCode/driver must write "1" in order to clear this flag
* 7-0: Each status bit indicates a channel's TxCredit error. When an error
* bit is set, it indicates that the FH has received a full indication
* from the RTC TxFIFO and the current value of the TxCredit counter was
* not equal to zero. This mean that the credit mechanism was not
* synchronized to the TxFIFO status
* uCode/driver must write "1" in order to clear this flag
*/
#define IWM_FH_TSSR_TX_ERROR_REG (IWM_FH_TSSR_LOWER_BOUND + 0x018)
#define IWM_FH_TSSR_TX_MSG_CONFIG_REG (IWM_FH_TSSR_LOWER_BOUND + 0x008)
#define IWM_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16)
/* Tx service channels */
#define IWM_FH_SRVC_CHNL (9)
#define IWM_FH_SRVC_LOWER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x9C8)
#define IWM_FH_SRVC_UPPER_BOUND (IWM_FH_MEM_LOWER_BOUND + 0x9D0)
#define IWM_FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \
(IWM_FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4)
#define IWM_FH_TX_CHICKEN_BITS_REG (IWM_FH_MEM_LOWER_BOUND + 0xE98)
#define IWM_FH_TX_TRB_REG(_chan) (IWM_FH_MEM_LOWER_BOUND + 0x958 + \
(_chan) * 4)
/* Instruct FH to increment the retry count of a packet when
* it is brought from the memory to TX-FIFO
*/
#define IWM_FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002)
#define IWM_RX_QUEUE_SIZE 256
#define IWM_RX_QUEUE_MASK 255
#define IWM_RX_QUEUE_SIZE_LOG 8
/*
* RX related structures and functions
*/
#define IWM_RX_FREE_BUFFERS 64
#define IWM_RX_LOW_WATERMARK 8
/**
* struct iwm_rb_status - reseve buffer status
* host memory mapped FH registers
* @closed_rb_num [0:11] - Indicates the index of the RB which was closed
* @closed_fr_num [0:11] - Indicates the index of the RX Frame which was closed
* @finished_rb_num [0:11] - Indicates the index of the current RB
* in which the last frame was written to
* @finished_fr_num [0:11] - Indicates the index of the RX Frame
* which was transferred
*/
struct iwm_rb_status {
uint16_t closed_rb_num;
uint16_t closed_fr_num;
uint16_t finished_rb_num;
uint16_t finished_fr_nam;
uint32_t unused;
} __packed;
#define IWM_TFD_QUEUE_SIZE_MAX (256)
#define IWM_TFD_QUEUE_SIZE_BC_DUP (64)
#define IWM_TFD_QUEUE_BC_SIZE (IWM_TFD_QUEUE_SIZE_MAX + \
IWM_TFD_QUEUE_SIZE_BC_DUP)
#define IWM_TX_DMA_MASK DMA_BIT_MASK(36)
#define IWM_NUM_OF_TBS 20
static inline uint8_t iwm_get_dma_hi_addr(bus_addr_t addr)
{
return (sizeof(addr) > sizeof(uint32_t) ? (addr >> 16) >> 16 : 0) & 0xF;
}
/**
* struct iwm_tfd_tb transmit buffer descriptor within transmit frame descriptor
*
* This structure contains dma address and length of transmission address
*
* @lo: low [31:0] portion of the dma address of TX buffer
* every even is unaligned on 16 bit boundary
* @hi_n_len 0-3 [35:32] portion of dma
* 4-15 length of the tx buffer
*/
struct iwm_tfd_tb {
uint32_t lo;
uint16_t hi_n_len;
} __packed;
/**
* struct iwm_tfd
*
* Transmit Frame Descriptor (TFD)
*
* @ __reserved1[3] reserved
* @ num_tbs 0-4 number of active tbs
* 5 reserved
* 6-7 padding (not used)
* @ tbs[20] transmit frame buffer descriptors
* @ __pad padding
*
* Each Tx queue uses a circular buffer of 256 TFDs stored in host DRAM.
* Both driver and device share these circular buffers, each of which must be
* contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes
*
* Driver must indicate the physical address of the base of each
* circular buffer via the IWM_FH_MEM_CBBC_QUEUE registers.
*
* Each TFD contains pointer/size information for up to 20 data buffers
* in host DRAM. These buffers collectively contain the (one) frame described
* by the TFD. Each buffer must be a single contiguous block of memory within
* itself, but buffers may be scattered in host DRAM. Each buffer has max size
* of (4K - 4). The concatenates all of a TFD's buffers into a single
* Tx frame, up to 8 KBytes in size.
*
* A maximum of 255 (not 256!) TFDs may be on a queue waiting for Tx.
*/
struct iwm_tfd {
uint8_t __reserved1[3];
uint8_t num_tbs;
struct iwm_tfd_tb tbs[IWM_NUM_OF_TBS];
uint32_t __pad;
} __packed;
/* Keep Warm Size */
#define IWM_KW_SIZE 0x1000 /* 4k */
/* Fixed (non-configurable) rx data from phy */
/**
* struct iwm_agn_schedq_bc_tbl scheduler byte count table
* base physical address provided by IWM_SCD_DRAM_BASE_ADDR
* @tfd_offset 0-12 - tx command byte count
* 12-16 - station index
*/
struct iwm_agn_scd_bc_tbl {
uint16_t tfd_offset[IWM_TFD_QUEUE_BC_SIZE];
} __packed;
/*
* END iwl-fh.h
*/
/*
* BEGIN mvm/fw-api.h
*/
/* Maximum number of Tx queues. */
#define IWM_MVM_MAX_QUEUES 31
/* Tx queue numbers */
enum {
IWM_MVM_OFFCHANNEL_QUEUE = 8,
IWM_MVM_CMD_QUEUE = 9,
IWM_MVM_AUX_QUEUE = 15,
};
enum iwm_mvm_tx_fifo {
IWM_MVM_TX_FIFO_BK = 0,
IWM_MVM_TX_FIFO_BE,
IWM_MVM_TX_FIFO_VI,
IWM_MVM_TX_FIFO_VO,
IWM_MVM_TX_FIFO_MCAST = 5,
IWM_MVM_TX_FIFO_CMD = 7,
};
#define IWM_MVM_STATION_COUNT 16
/* commands */
enum {
IWM_MVM_ALIVE = 0x1,
IWM_REPLY_ERROR = 0x2,
IWM_INIT_COMPLETE_NOTIF = 0x4,
/* PHY context commands */
IWM_PHY_CONTEXT_CMD = 0x8,
IWM_DBG_CFG = 0x9,
/* UMAC scan commands */
IWM_SCAN_ITERATION_COMPLETE_UMAC = 0xb5,
IWM_SCAN_CFG_CMD = 0xc,
IWM_SCAN_REQ_UMAC = 0xd,
IWM_SCAN_ABORT_UMAC = 0xe,
IWM_SCAN_COMPLETE_UMAC = 0xf,
/* station table */
IWM_ADD_STA_KEY = 0x17,
IWM_ADD_STA = 0x18,
IWM_REMOVE_STA = 0x19,
/* TX */
IWM_TX_CMD = 0x1c,
IWM_TXPATH_FLUSH = 0x1e,
IWM_MGMT_MCAST_KEY = 0x1f,
/* scheduler config */
IWM_SCD_QUEUE_CFG = 0x1d,
/* global key */
IWM_WEP_KEY = 0x20,
/* MAC and Binding commands */
IWM_MAC_CONTEXT_CMD = 0x28,
IWM_TIME_EVENT_CMD = 0x29, /* both CMD and response */
IWM_TIME_EVENT_NOTIFICATION = 0x2a,
IWM_BINDING_CONTEXT_CMD = 0x2b,
IWM_TIME_QUOTA_CMD = 0x2c,
IWM_NON_QOS_TX_COUNTER_CMD = 0x2d,
IWM_LQ_CMD = 0x4e,
/* paging block to FW cpu2 */
IWM_FW_PAGING_BLOCK_CMD = 0x4f,
/* Scan offload */
IWM_SCAN_OFFLOAD_REQUEST_CMD = 0x51,
IWM_SCAN_OFFLOAD_ABORT_CMD = 0x52,
IWM_HOT_SPOT_CMD = 0x53,
IWM_SCAN_OFFLOAD_COMPLETE = 0x6d,
IWM_SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6e,
IWM_SCAN_OFFLOAD_CONFIG_CMD = 0x6f,
IWM_MATCH_FOUND_NOTIFICATION = 0xd9,
IWM_SCAN_ITERATION_COMPLETE = 0xe7,
/* Phy */
IWM_PHY_CONFIGURATION_CMD = 0x6a,
IWM_CALIB_RES_NOTIF_PHY_DB = 0x6b,
IWM_PHY_DB_CMD = 0x6c,
/* Power - legacy power table command */
IWM_POWER_TABLE_CMD = 0x77,
IWM_PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78,
IWM_LTR_CONFIG = 0xee,
/* Thermal Throttling*/
IWM_REPLY_THERMAL_MNG_BACKOFF = 0x7e,
/* NVM */
IWM_NVM_ACCESS_CMD = 0x88,
IWM_SET_CALIB_DEFAULT_CMD = 0x8e,
IWM_BEACON_NOTIFICATION = 0x90,
IWM_BEACON_TEMPLATE_CMD = 0x91,
IWM_TX_ANT_CONFIGURATION_CMD = 0x98,
IWM_BT_CONFIG = 0x9b,
IWM_STATISTICS_NOTIFICATION = 0x9d,
IWM_REDUCE_TX_POWER_CMD = 0x9f,
/* RF-KILL commands and notifications */
IWM_CARD_STATE_CMD = 0xa0,
IWM_CARD_STATE_NOTIFICATION = 0xa1,
IWM_MISSED_BEACONS_NOTIFICATION = 0xa2,
IWM_MFUART_LOAD_NOTIFICATION = 0xb1,
/* Power - new power table command */
IWM_MAC_PM_POWER_TABLE = 0xa9,
IWM_REPLY_RX_PHY_CMD = 0xc0,
IWM_REPLY_RX_MPDU_CMD = 0xc1,
IWM_BA_NOTIF = 0xc5,
/* Location Aware Regulatory */
IWM_MCC_UPDATE_CMD = 0xc8,
IWM_MCC_CHUB_UPDATE_CMD = 0xc9,
/* BT Coex */
IWM_BT_COEX_PRIO_TABLE = 0xcc,
IWM_BT_COEX_PROT_ENV = 0xcd,
IWM_BT_PROFILE_NOTIFICATION = 0xce,
IWM_BT_COEX_CI = 0x5d,
IWM_REPLY_SF_CFG_CMD = 0xd1,
IWM_REPLY_BEACON_FILTERING_CMD = 0xd2,
/* DTS measurements */
IWM_CMD_DTS_MEASUREMENT_TRIGGER = 0xdc,
IWM_DTS_MEASUREMENT_NOTIFICATION = 0xdd,
IWM_REPLY_DEBUG_CMD = 0xf0,
IWM_DEBUG_LOG_MSG = 0xf7,
IWM_MCAST_FILTER_CMD = 0xd0,
/* D3 commands/notifications */
IWM_D3_CONFIG_CMD = 0xd3,
IWM_PROT_OFFLOAD_CONFIG_CMD = 0xd4,
IWM_OFFLOADS_QUERY_CMD = 0xd5,
IWM_REMOTE_WAKE_CONFIG_CMD = 0xd6,
/* for WoWLAN in particular */
IWM_WOWLAN_PATTERNS = 0xe0,
IWM_WOWLAN_CONFIGURATION = 0xe1,
IWM_WOWLAN_TSC_RSC_PARAM = 0xe2,
IWM_WOWLAN_TKIP_PARAM = 0xe3,
IWM_WOWLAN_KEK_KCK_MATERIAL = 0xe4,
IWM_WOWLAN_GET_STATUSES = 0xe5,
IWM_WOWLAN_TX_POWER_PER_DB = 0xe6,
/* and for NetDetect */
IWM_NET_DETECT_CONFIG_CMD = 0x54,
IWM_NET_DETECT_PROFILES_QUERY_CMD = 0x56,
IWM_NET_DETECT_PROFILES_CMD = 0x57,
IWM_NET_DETECT_HOTSPOTS_CMD = 0x58,
IWM_NET_DETECT_HOTSPOTS_QUERY_CMD = 0x59,
};
enum iwm_phy_ops_subcmd_ids {
IWM_CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0,
IWM_CTDP_CONFIG_CMD = 0x03,
IWM_TEMP_REPORTING_THRESHOLDS_CMD = 0x04,
IWM_CT_KILL_NOTIFICATION = 0xFE,
IWM_DTS_MEASUREMENT_NOTIF_WIDE = 0xFF,
};
/* command groups */
enum {
IWM_LEGACY_GROUP = 0x0,
IWM_LONG_GROUP = 0x1,
IWM_SYSTEM_GROUP = 0x2,
IWM_MAC_CONF_GROUP = 0x3,
IWM_PHY_OPS_GROUP = 0x4,
IWM_DATA_PATH_GROUP = 0x5,
IWM_PROT_OFFLOAD_GROUP = 0xb,
};
/**
* struct iwm_cmd_response - generic response struct for most commands
* @status: status of the command asked, changes for each one
*/
struct iwm_cmd_response {
uint32_t status;
};
/*
* struct iwm_tx_ant_cfg_cmd
* @valid: valid antenna configuration
*/
struct iwm_tx_ant_cfg_cmd {
uint32_t valid;
} __packed;
/**
* struct iwm_reduce_tx_power_cmd - TX power reduction command
* IWM_REDUCE_TX_POWER_CMD = 0x9f
* @flags: (reserved for future implementation)
* @mac_context_id: id of the mac ctx for which we are reducing TX power.
* @pwr_restriction: TX power restriction in dBms.
*/
struct iwm_reduce_tx_power_cmd {
uint8_t flags;
uint8_t mac_context_id;
uint16_t pwr_restriction;
} __packed; /* IWM_TX_REDUCED_POWER_API_S_VER_1 */
enum iwm_dev_tx_power_cmd_mode {
IWM_TX_POWER_MODE_SET_MAC = 0,
IWM_TX_POWER_MODE_SET_DEVICE = 1,
IWM_TX_POWER_MODE_SET_CHAINS = 2,
IWM_TX_POWER_MODE_SET_ACK = 3,
}; /* TX_POWER_REDUCED_FLAGS_TYPE_API_E_VER_4 */;
#define IWM_NUM_CHAIN_LIMITS 2
#define IWM_NUM_SUB_BANDS 5
/**
* struct iwm_dev_tx_power_cmd - TX power reduction command
* @set_mode: see &enum iwl_dev_tx_power_cmd_mode
* @mac_context_id: id of the mac ctx for which we are reducing TX power.
* @pwr_restriction: TX power restriction in 1/8 dBms.
* @dev_24: device TX power restriction in 1/8 dBms
* @dev_52_low: device TX power restriction upper band - low
* @dev_52_high: device TX power restriction upper band - high
* @per_chain_restriction: per chain restrictions
*/
struct iwm_dev_tx_power_cmd_v3 {
uint32_t set_mode;
uint32_t mac_context_id;
uint16_t pwr_restriction;
uint16_t dev_24;
uint16_t dev_52_low;
uint16_t dev_52_high;
uint16_t per_chain_restriction[IWM_NUM_CHAIN_LIMITS][IWM_NUM_SUB_BANDS];
} __packed; /* TX_REDUCED_POWER_API_S_VER_3 */
#define IWM_DEV_MAX_TX_POWER 0x7FFF
/**
* struct iwm_dev_tx_power_cmd - TX power reduction command
* @v3: version 3 of the command, embedded here for easier software handling
* @enable_ack_reduction: enable or disable close range ack TX power
* reduction.
*/
struct iwm_dev_tx_power_cmd {
/* v4 is just an extension of v3 - keep this here */
struct iwm_dev_tx_power_cmd_v3 v3;
uint8_t enable_ack_reduction;
uint8_t reserved[3];
} __packed; /* TX_REDUCED_POWER_API_S_VER_4 */
/*
* Calibration control struct.
* Sent as part of the phy configuration command.
* @flow_trigger: bitmap for which calibrations to perform according to
* flow triggers.
* @event_trigger: bitmap for which calibrations to perform according to
* event triggers.
*/
struct iwm_calib_ctrl {
uint32_t flow_trigger;
uint32_t event_trigger;
} __packed;
/* This enum defines the bitmap of various calibrations to enable in both
* init ucode and runtime ucode through IWM_CALIBRATION_CFG_CMD.
*/
enum iwm_calib_cfg {
IWM_CALIB_CFG_XTAL_IDX = (1 << 0),
IWM_CALIB_CFG_TEMPERATURE_IDX = (1 << 1),
IWM_CALIB_CFG_VOLTAGE_READ_IDX = (1 << 2),
IWM_CALIB_CFG_PAPD_IDX = (1 << 3),
IWM_CALIB_CFG_TX_PWR_IDX = (1 << 4),
IWM_CALIB_CFG_DC_IDX = (1 << 5),
IWM_CALIB_CFG_BB_FILTER_IDX = (1 << 6),
IWM_CALIB_CFG_LO_LEAKAGE_IDX = (1 << 7),
IWM_CALIB_CFG_TX_IQ_IDX = (1 << 8),
IWM_CALIB_CFG_TX_IQ_SKEW_IDX = (1 << 9),
IWM_CALIB_CFG_RX_IQ_IDX = (1 << 10),
IWM_CALIB_CFG_RX_IQ_SKEW_IDX = (1 << 11),
IWM_CALIB_CFG_SENSITIVITY_IDX = (1 << 12),
IWM_CALIB_CFG_CHAIN_NOISE_IDX = (1 << 13),
IWM_CALIB_CFG_DISCONNECTED_ANT_IDX = (1 << 14),
IWM_CALIB_CFG_ANT_COUPLING_IDX = (1 << 15),
IWM_CALIB_CFG_DAC_IDX = (1 << 16),
IWM_CALIB_CFG_ABS_IDX = (1 << 17),
IWM_CALIB_CFG_AGC_IDX = (1 << 18),
};
/*
* Phy configuration command.
*/
struct iwm_phy_cfg_cmd {
uint32_t phy_cfg;
struct iwm_calib_ctrl calib_control;
} __packed;
#define IWM_PHY_CFG_RADIO_TYPE ((1 << 0) | (1 << 1))
#define IWM_PHY_CFG_RADIO_STEP ((1 << 2) | (1 << 3))
#define IWM_PHY_CFG_RADIO_DASH ((1 << 4) | (1 << 5))
#define IWM_PHY_CFG_PRODUCT_NUMBER ((1 << 6) | (1 << 7))
#define IWM_PHY_CFG_TX_CHAIN_A (1 << 8)
#define IWM_PHY_CFG_TX_CHAIN_B (1 << 9)
#define IWM_PHY_CFG_TX_CHAIN_C (1 << 10)
#define IWM_PHY_CFG_RX_CHAIN_A (1 << 12)
#define IWM_PHY_CFG_RX_CHAIN_B (1 << 13)
#define IWM_PHY_CFG_RX_CHAIN_C (1 << 14)
/* Target of the IWM_NVM_ACCESS_CMD */
enum {
IWM_NVM_ACCESS_TARGET_CACHE = 0,
IWM_NVM_ACCESS_TARGET_OTP = 1,
IWM_NVM_ACCESS_TARGET_EEPROM = 2,
};
/* Section types for IWM_NVM_ACCESS_CMD */
enum {
IWM_NVM_SECTION_TYPE_SW = 1,
IWM_NVM_SECTION_TYPE_REGULATORY = 3,
IWM_NVM_SECTION_TYPE_CALIBRATION = 4,
IWM_NVM_SECTION_TYPE_PRODUCTION = 5,
IWM_NVM_SECTION_TYPE_REGULATORY_SDP = 8,
IWM_NVM_SECTION_TYPE_MAC_OVERRIDE = 11,
IWM_NVM_SECTION_TYPE_PHY_SKU = 12,
IWM_NVM_MAX_NUM_SECTIONS = 13,
};
/**
* struct iwm_nvm_access_cmd_ver2 - Request the device to send an NVM section
* @op_code: 0 - read, 1 - write
* @target: IWM_NVM_ACCESS_TARGET_*
* @type: IWM_NVM_SECTION_TYPE_*
* @offset: offset in bytes into the section
* @length: in bytes, to read/write
* @data: if write operation, the data to write. On read its empty
*/
struct iwm_nvm_access_cmd {
uint8_t op_code;
uint8_t target;
uint16_t type;
uint16_t offset;
uint16_t length;
uint8_t data[];
} __packed; /* IWM_NVM_ACCESS_CMD_API_S_VER_2 */
#define IWM_NUM_OF_FW_PAGING_BLOCKS 33 /* 32 for data and 1 block for CSS */
/*
* struct iwm_fw_paging_cmd - paging layout
*
* (IWM_FW_PAGING_BLOCK_CMD = 0x4f)
*
* Send to FW the paging layout in the driver.
*
* @flags: various flags for the command
* @block_size: the block size in powers of 2
* @block_num: number of blocks specified in the command.
* @device_phy_addr: virtual addresses from device side
*/
struct iwm_fw_paging_cmd {
uint32_t flags;
uint32_t block_size;
uint32_t block_num;
uint32_t device_phy_addr[IWM_NUM_OF_FW_PAGING_BLOCKS];
} __packed; /* IWM_FW_PAGING_BLOCK_CMD_API_S_VER_1 */
/*
* Fw items ID's
*
* @IWM_FW_ITEM_ID_PAGING: Address of the pages that the FW will upload
* download
*/
enum iwm_fw_item_id {
IWM_FW_ITEM_ID_PAGING = 3,
};
/*
* struct iwm_fw_get_item_cmd - get an item from the fw
*/
struct iwm_fw_get_item_cmd {
uint32_t item_id;
} __packed; /* IWM_FW_GET_ITEM_CMD_API_S_VER_1 */
/**
* struct iwm_nvm_access_resp_ver2 - response to IWM_NVM_ACCESS_CMD
* @offset: offset in bytes into the section
* @length: in bytes, either how much was written or read
* @type: IWM_NVM_SECTION_TYPE_*
* @status: 0 for success, fail otherwise
* @data: if read operation, the data returned. Empty on write.
*/
struct iwm_nvm_access_resp {
uint16_t offset;
uint16_t length;
uint16_t type;
uint16_t status;
uint8_t data[];
} __packed; /* IWM_NVM_ACCESS_CMD_RESP_API_S_VER_2 */
/* IWM_MVM_ALIVE 0x1 */
/* alive response is_valid values */
#define IWM_ALIVE_RESP_UCODE_OK (1 << 0)
#define IWM_ALIVE_RESP_RFKILL (1 << 1)
/* alive response ver_type values */
enum {
IWM_FW_TYPE_HW = 0,
IWM_FW_TYPE_PROT = 1,
IWM_FW_TYPE_AP = 2,
IWM_FW_TYPE_WOWLAN = 3,
IWM_FW_TYPE_TIMING = 4,
IWM_FW_TYPE_WIPAN = 5
};
/* alive response ver_subtype values */
enum {
IWM_FW_SUBTYPE_FULL_FEATURE = 0,
IWM_FW_SUBTYPE_BOOTSRAP = 1, /* Not valid */
IWM_FW_SUBTYPE_REDUCED = 2,
IWM_FW_SUBTYPE_ALIVE_ONLY = 3,
IWM_FW_SUBTYPE_WOWLAN = 4,
IWM_FW_SUBTYPE_AP_SUBTYPE = 5,
IWM_FW_SUBTYPE_WIPAN = 6,
IWM_FW_SUBTYPE_INITIALIZE = 9
};
#define IWM_ALIVE_STATUS_ERR 0xDEAD
#define IWM_ALIVE_STATUS_OK 0xCAFE
#define IWM_ALIVE_FLG_RFKILL (1 << 0)
struct iwm_lmac_alive {
uint32_t ucode_major;
uint32_t ucode_minor;
uint8_t ver_subtype;
uint8_t ver_type;
uint8_t mac;
uint8_t opt;
uint32_t timestamp;
uint32_t error_event_table_ptr; /* SRAM address for error log */
uint32_t log_event_table_ptr; /* SRAM address for LMAC event log */
uint32_t cpu_register_ptr;
uint32_t dbgm_config_ptr;
uint32_t alive_counter_ptr;
uint32_t scd_base_ptr; /* SRAM address for SCD */
uint32_t st_fwrd_addr; /* pointer to Store and forward */
uint32_t st_fwrd_size;
} __packed; /* UCODE_ALIVE_NTFY_API_S_VER_3 */
struct iwm_umac_alive {
uint32_t umac_major; /* UMAC version: major */
uint32_t umac_minor; /* UMAC version: minor */
uint32_t error_info_addr; /* SRAM address for UMAC error log */
uint32_t dbg_print_buff_addr;
} __packed; /* UMAC_ALIVE_DATA_API_S_VER_2 */
struct iwm_mvm_alive_resp_v3 {
uint16_t status;
uint16_t flags;
struct iwm_lmac_alive lmac_data;
struct iwm_umac_alive umac_data;
} __packed; /* ALIVE_RES_API_S_VER_3 */
struct iwm_mvm_alive_resp {
uint16_t status;
uint16_t flags;
struct iwm_lmac_alive lmac_data[2];
struct iwm_umac_alive umac_data;
} __packed; /* ALIVE_RES_API_S_VER_4 */
/* Error response/notification */
enum {
IWM_FW_ERR_UNKNOWN_CMD = 0x0,
IWM_FW_ERR_INVALID_CMD_PARAM = 0x1,
IWM_FW_ERR_SERVICE = 0x2,
IWM_FW_ERR_ARC_MEMORY = 0x3,
IWM_FW_ERR_ARC_CODE = 0x4,
IWM_FW_ERR_WATCH_DOG = 0x5,
IWM_FW_ERR_WEP_GRP_KEY_INDX = 0x10,
IWM_FW_ERR_WEP_KEY_SIZE = 0x11,
IWM_FW_ERR_OBSOLETE_FUNC = 0x12,
IWM_FW_ERR_UNEXPECTED = 0xFE,
IWM_FW_ERR_FATAL = 0xFF
};
/**
* struct iwm_error_resp - FW error indication
* ( IWM_REPLY_ERROR = 0x2 )
* @error_type: one of IWM_FW_ERR_*
* @cmd_id: the command ID for which the error occurred
* @bad_cmd_seq_num: sequence number of the erroneous command
* @error_service: which service created the error, applicable only if
* error_type = 2, otherwise 0
* @timestamp: TSF in usecs.
*/
struct iwm_error_resp {
uint32_t error_type;
uint8_t cmd_id;
uint8_t reserved1;
uint16_t bad_cmd_seq_num;
uint32_t error_service;
uint64_t timestamp;
} __packed;
/* Common PHY, MAC and Bindings definitions */
#define IWM_MAX_MACS_IN_BINDING (3)
#define IWM_MAX_BINDINGS (4)
#define IWM_AUX_BINDING_INDEX (3)
#define IWM_MAX_PHYS (4)
/* Used to extract ID and color from the context dword */
#define IWM_FW_CTXT_ID_POS (0)
#define IWM_FW_CTXT_ID_MSK (0xff << IWM_FW_CTXT_ID_POS)
#define IWM_FW_CTXT_COLOR_POS (8)
#define IWM_FW_CTXT_COLOR_MSK (0xff << IWM_FW_CTXT_COLOR_POS)
#define IWM_FW_CTXT_INVALID (0xffffffff)
#define IWM_FW_CMD_ID_AND_COLOR(_id, _color) ((_id << IWM_FW_CTXT_ID_POS) |\
(_color << IWM_FW_CTXT_COLOR_POS))
/* Possible actions on PHYs, MACs and Bindings */
enum {
IWM_FW_CTXT_ACTION_STUB = 0,
IWM_FW_CTXT_ACTION_ADD,
IWM_FW_CTXT_ACTION_MODIFY,
IWM_FW_CTXT_ACTION_REMOVE,
IWM_FW_CTXT_ACTION_NUM
}; /* COMMON_CONTEXT_ACTION_API_E_VER_1 */
/* Time Events */
/* Time Event types, according to MAC type */
enum iwm_time_event_type {
/* BSS Station Events */
IWM_TE_BSS_STA_AGGRESSIVE_ASSOC,
IWM_TE_BSS_STA_ASSOC,
IWM_TE_BSS_EAP_DHCP_PROT,
IWM_TE_BSS_QUIET_PERIOD,
/* P2P Device Events */
IWM_TE_P2P_DEVICE_DISCOVERABLE,
IWM_TE_P2P_DEVICE_LISTEN,
IWM_TE_P2P_DEVICE_ACTION_SCAN,
IWM_TE_P2P_DEVICE_FULL_SCAN,
/* P2P Client Events */
IWM_TE_P2P_CLIENT_AGGRESSIVE_ASSOC,
IWM_TE_P2P_CLIENT_ASSOC,
IWM_TE_P2P_CLIENT_QUIET_PERIOD,
/* P2P GO Events */
IWM_TE_P2P_GO_ASSOC_PROT,
IWM_TE_P2P_GO_REPETITIVE_NOA,
IWM_TE_P2P_GO_CT_WINDOW,
/* WiDi Sync Events */
IWM_TE_WIDI_TX_SYNC,
IWM_TE_MAX
}; /* IWM_MAC_EVENT_TYPE_API_E_VER_1 */
/* Time event - defines for command API v1 */
/*
* @IWM_TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed.
* @IWM_TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only
* the first fragment is scheduled.
* @IWM_TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only
* the first 2 fragments are scheduled.
* @IWM_TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
* number of fragments are valid.
*
* Other than the constant defined above, specifying a fragmentation value 'x'
* means that the event can be fragmented but only the first 'x' will be
* scheduled.
*/
enum {
IWM_TE_V1_FRAG_NONE = 0,
IWM_TE_V1_FRAG_SINGLE = 1,
IWM_TE_V1_FRAG_DUAL = 2,
IWM_TE_V1_FRAG_ENDLESS = 0xffffffff
};
/* If a Time Event can be fragmented, this is the max number of fragments */
#define IWM_TE_V1_FRAG_MAX_MSK 0x0fffffff
/* Repeat the time event endlessly (until removed) */
#define IWM_TE_V1_REPEAT_ENDLESS 0xffffffff
/* If a Time Event has bounded repetitions, this is the maximal value */
#define IWM_TE_V1_REPEAT_MAX_MSK_V1 0x0fffffff
/* Time Event dependencies: none, on another TE, or in a specific time */
enum {
IWM_TE_V1_INDEPENDENT = 0,
IWM_TE_V1_DEP_OTHER = (1 << 0),
IWM_TE_V1_DEP_TSF = (1 << 1),
IWM_TE_V1_EVENT_SOCIOPATHIC = (1 << 2),
}; /* IWM_MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */
/*
* @IWM_TE_V1_NOTIF_NONE: no notifications
* @IWM_TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start
* @IWM_TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end
* @IWM_TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use
* @IWM_TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use.
* @IWM_TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start
* @IWM_TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end
* @IWM_TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use.
* @IWM_TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use.
*
* Supported Time event notifications configuration.
* A notification (both event and fragment) includes a status indicating weather
* the FW was able to schedule the event or not. For fragment start/end
* notification the status is always success. There is no start/end fragment
* notification for monolithic events.
*/
enum {
IWM_TE_V1_NOTIF_NONE = 0,
IWM_TE_V1_NOTIF_HOST_EVENT_START = (1 << 0),
IWM_TE_V1_NOTIF_HOST_EVENT_END = (1 << 1),
IWM_TE_V1_NOTIF_INTERNAL_EVENT_START = (1 << 2),
IWM_TE_V1_NOTIF_INTERNAL_EVENT_END = (1 << 3),
IWM_TE_V1_NOTIF_HOST_FRAG_START = (1 << 4),
IWM_TE_V1_NOTIF_HOST_FRAG_END = (1 << 5),
IWM_TE_V1_NOTIF_INTERNAL_FRAG_START = (1 << 6),
IWM_TE_V1_NOTIF_INTERNAL_FRAG_END = (1 << 7),
IWM_T2_V2_START_IMMEDIATELY = (1 << 11),
}; /* IWM_MAC_EVENT_ACTION_API_E_VER_2 */
/* Time event - defines for command API */
/*
* @IWM_TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed.
* @IWM_TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only
* the first fragment is scheduled.
* @IWM_TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only
* the first 2 fragments are scheduled.
* @IWM_TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any
* number of fragments are valid.
*
* Other than the constant defined above, specifying a fragmentation value 'x'
* means that the event can be fragmented but only the first 'x' will be
* scheduled.
*/
enum {
IWM_TE_V2_FRAG_NONE = 0,
IWM_TE_V2_FRAG_SINGLE = 1,
IWM_TE_V2_FRAG_DUAL = 2,
IWM_TE_V2_FRAG_MAX = 0xfe,
IWM_TE_V2_FRAG_ENDLESS = 0xff
};
/* Repeat the time event endlessly (until removed) */
#define IWM_TE_V2_REPEAT_ENDLESS 0xff
/* If a Time Event has bounded repetitions, this is the maximal value */
#define IWM_TE_V2_REPEAT_MAX 0xfe
#define IWM_TE_V2_PLACEMENT_POS 12
#define IWM_TE_V2_ABSENCE_POS 15
/* Time event policy values
* A notification (both event and fragment) includes a status indicating weather
* the FW was able to schedule the event or not. For fragment start/end
* notification the status is always success. There is no start/end fragment
* notification for monolithic events.
*
* @IWM_TE_V2_DEFAULT_POLICY: independent, social, present, unoticable
* @IWM_TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start
* @IWM_TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end
* @IWM_TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use
* @IWM_TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use.
* @IWM_TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start
* @IWM_TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end
* @IWM_TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use.
* @IWM_TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use.
* @IWM_TE_V2_DEP_OTHER: depends on another time event
* @IWM_TE_V2_DEP_TSF: depends on a specific time
* @IWM_TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC
* @IWM_TE_V2_ABSENCE: are we present or absent during the Time Event.
*/
enum {
IWM_TE_V2_DEFAULT_POLICY = 0x0,
/* notifications (event start/stop, fragment start/stop) */
IWM_TE_V2_NOTIF_HOST_EVENT_START = (1 << 0),
IWM_TE_V2_NOTIF_HOST_EVENT_END = (1 << 1),
IWM_TE_V2_NOTIF_INTERNAL_EVENT_START = (1 << 2),
IWM_TE_V2_NOTIF_INTERNAL_EVENT_END = (1 << 3),
IWM_TE_V2_NOTIF_HOST_FRAG_START = (1 << 4),
IWM_TE_V2_NOTIF_HOST_FRAG_END = (1 << 5),
IWM_TE_V2_NOTIF_INTERNAL_FRAG_START = (1 << 6),
IWM_TE_V2_NOTIF_INTERNAL_FRAG_END = (1 << 7),
IWM_TE_V2_NOTIF_MSK = 0xff,
/* placement characteristics */
IWM_TE_V2_DEP_OTHER = (1 << IWM_TE_V2_PLACEMENT_POS),
IWM_TE_V2_DEP_TSF = (1 << (IWM_TE_V2_PLACEMENT_POS + 1)),
IWM_TE_V2_EVENT_SOCIOPATHIC = (1 << (IWM_TE_V2_PLACEMENT_POS + 2)),
/* are we present or absent during the Time Event. */
IWM_TE_V2_ABSENCE = (1 << IWM_TE_V2_ABSENCE_POS),
};
/**
* struct iwm_time_event_cmd_api - configuring Time Events
* with struct IWM_MAC_TIME_EVENT_DATA_API_S_VER_2 (see also
* with version 1. determined by IWM_UCODE_TLV_FLAGS)
* ( IWM_TIME_EVENT_CMD = 0x29 )
* @id_and_color: ID and color of the relevant MAC
* @action: action to perform, one of IWM_FW_CTXT_ACTION_*
* @id: this field has two meanings, depending on the action:
* If the action is ADD, then it means the type of event to add.
* For all other actions it is the unique event ID assigned when the
* event was added by the FW.
* @apply_time: When to start the Time Event (in GP2)
* @max_delay: maximum delay to event's start (apply time), in TU
* @depends_on: the unique ID of the event we depend on (if any)
* @interval: interval between repetitions, in TU
* @duration: duration of event in TU
* @repeat: how many repetitions to do, can be IWM_TE_REPEAT_ENDLESS
* @max_frags: maximal number of fragments the Time Event can be divided to
* @policy: defines whether uCode shall notify the host or other uCode modules
* on event and/or fragment start and/or end
* using one of IWM_TE_INDEPENDENT, IWM_TE_DEP_OTHER, IWM_TE_DEP_TSF
* IWM_TE_EVENT_SOCIOPATHIC
* using IWM_TE_ABSENCE and using IWM_TE_NOTIF_*
*/
struct iwm_time_event_cmd {
/* COMMON_INDEX_HDR_API_S_VER_1 */
uint32_t id_and_color;
uint32_t action;
uint32_t id;
/* IWM_MAC_TIME_EVENT_DATA_API_S_VER_2 */
uint32_t apply_time;
uint32_t max_delay;
uint32_t depends_on;
uint32_t interval;
uint32_t duration;
uint8_t repeat;
uint8_t max_frags;
uint16_t policy;
} __packed; /* IWM_MAC_TIME_EVENT_CMD_API_S_VER_2 */
/**
* struct iwm_time_event_resp - response structure to iwm_time_event_cmd
* @status: bit 0 indicates success, all others specify errors
* @id: the Time Event type
* @unique_id: the unique ID assigned (in ADD) or given (others) to the TE
* @id_and_color: ID and color of the relevant MAC
*/
struct iwm_time_event_resp {
uint32_t status;
uint32_t id;
uint32_t unique_id;
uint32_t id_and_color;
} __packed; /* IWM_MAC_TIME_EVENT_RSP_API_S_VER_1 */
/**
* struct iwm_time_event_notif - notifications of time event start/stop
* ( IWM_TIME_EVENT_NOTIFICATION = 0x2a )
* @timestamp: action timestamp in GP2
* @session_id: session's unique id
* @unique_id: unique id of the Time Event itself
* @id_and_color: ID and color of the relevant MAC
* @action: one of IWM_TE_NOTIF_START or IWM_TE_NOTIF_END
* @status: true if scheduled, false otherwise (not executed)
*/
struct iwm_time_event_notif {
uint32_t timestamp;
uint32_t session_id;
uint32_t unique_id;
uint32_t id_and_color;
uint32_t action;
uint32_t status;
} __packed; /* IWM_MAC_TIME_EVENT_NTFY_API_S_VER_1 */
/* Bindings and Time Quota */
/**
* struct iwm_binding_cmd - configuring bindings
* ( IWM_BINDING_CONTEXT_CMD = 0x2b )
* @id_and_color: ID and color of the relevant Binding
* @action: action to perform, one of IWM_FW_CTXT_ACTION_*
* @macs: array of MAC id and colors which belong to the binding
* @phy: PHY id and color which belongs to the binding
*/
struct iwm_binding_cmd {
/* COMMON_INDEX_HDR_API_S_VER_1 */
uint32_t id_and_color;
uint32_t action;
/* IWM_BINDING_DATA_API_S_VER_1 */
uint32_t macs[IWM_MAX_MACS_IN_BINDING];
uint32_t phy;
} __packed; /* IWM_BINDING_CMD_API_S_VER_1 */
/* The maximal number of fragments in the FW's schedule session */
#define IWM_MVM_MAX_QUOTA 128
/**
* struct iwm_time_quota_data - configuration of time quota per binding
* @id_and_color: ID and color of the relevant Binding
* @quota: absolute time quota in TU. The scheduler will try to divide the
* remainig quota (after Time Events) according to this quota.
* @max_duration: max uninterrupted context duration in TU
*/
struct iwm_time_quota_data {
uint32_t id_and_color;
uint32_t quota;
uint32_t max_duration;
} __packed; /* IWM_TIME_QUOTA_DATA_API_S_VER_1 */
/**
* struct iwm_time_quota_cmd - configuration of time quota between bindings
* ( IWM_TIME_QUOTA_CMD = 0x2c )
* @quotas: allocations per binding
*/
struct iwm_time_quota_cmd {
struct iwm_time_quota_data quotas[IWM_MAX_BINDINGS];
} __packed; /* IWM_TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */
/* PHY context */
/* Supported bands */
#define IWM_PHY_BAND_5 (0)
#define IWM_PHY_BAND_24 (1)
/* Supported channel width, vary if there is VHT support */
#define IWM_PHY_VHT_CHANNEL_MODE20 (0x0)
#define IWM_PHY_VHT_CHANNEL_MODE40 (0x1)
#define IWM_PHY_VHT_CHANNEL_MODE80 (0x2)
#define IWM_PHY_VHT_CHANNEL_MODE160 (0x3)
/*
* Control channel position:
* For legacy set bit means upper channel, otherwise lower.
* For VHT - bit-2 marks if the control is lower/upper relative to center-freq
* bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0.
* center_freq
* |
* 40Mhz |_______|_______|
* 80Mhz |_______|_______|_______|_______|
* 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______|
* code 011 010 001 000 | 100 101 110 111
*/
#define IWM_PHY_VHT_CTRL_POS_1_BELOW (0x0)
#define IWM_PHY_VHT_CTRL_POS_2_BELOW (0x1)
#define IWM_PHY_VHT_CTRL_POS_3_BELOW (0x2)
#define IWM_PHY_VHT_CTRL_POS_4_BELOW (0x3)
#define IWM_PHY_VHT_CTRL_POS_1_ABOVE (0x4)
#define IWM_PHY_VHT_CTRL_POS_2_ABOVE (0x5)
#define IWM_PHY_VHT_CTRL_POS_3_ABOVE (0x6)
#define IWM_PHY_VHT_CTRL_POS_4_ABOVE (0x7)
/*
* @band: IWM_PHY_BAND_*
* @channel: channel number
* @width: PHY_[VHT|LEGACY]_CHANNEL_*
* @ctrl channel: PHY_[VHT|LEGACY]_CTRL_*
*/
struct iwm_fw_channel_info {
uint8_t band;
uint8_t channel;
uint8_t width;
uint8_t ctrl_pos;
} __packed;
#define IWM_PHY_RX_CHAIN_DRIVER_FORCE_POS (0)
#define IWM_PHY_RX_CHAIN_DRIVER_FORCE_MSK \
(0x1 << IWM_PHY_RX_CHAIN_DRIVER_FORCE_POS)
#define IWM_PHY_RX_CHAIN_VALID_POS (1)
#define IWM_PHY_RX_CHAIN_VALID_MSK \
(0x7 << IWM_PHY_RX_CHAIN_VALID_POS)
#define IWM_PHY_RX_CHAIN_FORCE_SEL_POS (4)
#define IWM_PHY_RX_CHAIN_FORCE_SEL_MSK \
(0x7 << IWM_PHY_RX_CHAIN_FORCE_SEL_POS)
#define IWM_PHY_RX_CHAIN_FORCE_MIMO_SEL_POS (7)
#define IWM_PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \
(0x7 << IWM_PHY_RX_CHAIN_FORCE_MIMO_SEL_POS)
#define IWM_PHY_RX_CHAIN_CNT_POS (10)
#define IWM_PHY_RX_CHAIN_CNT_MSK \
(0x3 << IWM_PHY_RX_CHAIN_CNT_POS)
#define IWM_PHY_RX_CHAIN_MIMO_CNT_POS (12)
#define IWM_PHY_RX_CHAIN_MIMO_CNT_MSK \
(0x3 << IWM_PHY_RX_CHAIN_MIMO_CNT_POS)
#define IWM_PHY_RX_CHAIN_MIMO_FORCE_POS (14)
#define IWM_PHY_RX_CHAIN_MIMO_FORCE_MSK \
(0x1 << IWM_PHY_RX_CHAIN_MIMO_FORCE_POS)
/* TODO: fix the value, make it depend on firmware at runtime? */
#define IWM_NUM_PHY_CTX 3
/* TODO: complete missing documentation */
/**
* struct iwm_phy_context_cmd - config of the PHY context
* ( IWM_PHY_CONTEXT_CMD = 0x8 )
* @id_and_color: ID and color of the relevant Binding
* @action: action to perform, one of IWM_FW_CTXT_ACTION_*
* @apply_time: 0 means immediate apply and context switch.
* other value means apply new params after X usecs
* @tx_param_color: ???
* @channel_info:
* @txchain_info: ???
* @rxchain_info: ???
* @acquisition_data: ???
* @dsp_cfg_flags: set to 0
*/
struct iwm_phy_context_cmd {
/* COMMON_INDEX_HDR_API_S_VER_1 */
uint32_t id_and_color;
uint32_t action;
/* IWM_PHY_CONTEXT_DATA_API_S_VER_1 */
uint32_t apply_time;
uint32_t tx_param_color;
struct iwm_fw_channel_info ci;
uint32_t txchain_info;
uint32_t rxchain_info;
uint32_t acquisition_data;
uint32_t dsp_cfg_flags;
} __packed; /* IWM_PHY_CONTEXT_CMD_API_VER_1 */
#define IWM_RX_INFO_PHY_CNT 8
#define IWM_RX_INFO_ENERGY_ANT_ABC_IDX 1
#define IWM_RX_INFO_ENERGY_ANT_A_MSK 0x000000ff
#define IWM_RX_INFO_ENERGY_ANT_B_MSK 0x0000ff00
#define IWM_RX_INFO_ENERGY_ANT_C_MSK 0x00ff0000
#define IWM_RX_INFO_ENERGY_ANT_A_POS 0
#define IWM_RX_INFO_ENERGY_ANT_B_POS 8
#define IWM_RX_INFO_ENERGY_ANT_C_POS 16
#define IWM_RX_INFO_AGC_IDX 1
#define IWM_RX_INFO_RSSI_AB_IDX 2
#define IWM_OFDM_AGC_A_MSK 0x0000007f
#define IWM_OFDM_AGC_A_POS 0
#define IWM_OFDM_AGC_B_MSK 0x00003f80
#define IWM_OFDM_AGC_B_POS 7
#define IWM_OFDM_AGC_CODE_MSK 0x3fe00000
#define IWM_OFDM_AGC_CODE_POS 20
#define IWM_OFDM_RSSI_INBAND_A_MSK 0x00ff
#define IWM_OFDM_RSSI_A_POS 0
#define IWM_OFDM_RSSI_ALLBAND_A_MSK 0xff00
#define IWM_OFDM_RSSI_ALLBAND_A_POS 8
#define IWM_OFDM_RSSI_INBAND_B_MSK 0xff0000
#define IWM_OFDM_RSSI_B_POS 16
#define IWM_OFDM_RSSI_ALLBAND_B_MSK 0xff000000
#define IWM_OFDM_RSSI_ALLBAND_B_POS 24
/**
* struct iwm_rx_phy_info - phy info
* (IWM_REPLY_RX_PHY_CMD = 0xc0)
* @non_cfg_phy_cnt: non configurable DSP phy data byte count
* @cfg_phy_cnt: configurable DSP phy data byte count
* @stat_id: configurable DSP phy data set ID
* @reserved1:
* @system_timestamp: GP2 at on air rise
* @timestamp: TSF at on air rise
* @beacon_time_stamp: beacon at on-air rise
* @phy_flags: general phy flags: band, modulation, ...
* @channel: channel number
* @non_cfg_phy_buf: for various implementations of non_cfg_phy
* @rate_n_flags: IWM_RATE_MCS_*
* @byte_count: frame's byte-count
* @frame_time: frame's time on the air, based on byte count and frame rate
* calculation
* @mac_active_msk: what MACs were active when the frame was received
*
* Before each Rx, the device sends this data. It contains PHY information
* about the reception of the packet.
*/
struct iwm_rx_phy_info {
uint8_t non_cfg_phy_cnt;
uint8_t cfg_phy_cnt;
uint8_t stat_id;
uint8_t reserved1;
uint32_t system_timestamp;
uint64_t timestamp;
uint32_t beacon_time_stamp;
uint16_t phy_flags;
#define IWM_PHY_INFO_FLAG_SHPREAMBLE (1 << 2)
uint16_t channel;
uint32_t non_cfg_phy[IWM_RX_INFO_PHY_CNT];
uint8_t rate;
uint8_t rflags;
uint16_t xrflags;
uint32_t byte_count;
uint16_t mac_active_msk;
uint16_t frame_time;
} __packed;
struct iwm_rx_mpdu_res_start {
uint16_t byte_count;
uint16_t reserved;
} __packed;
/**
* enum iwm_rx_phy_flags - to parse %iwm_rx_phy_info phy_flags
* @IWM_RX_RES_PHY_FLAGS_BAND_24: true if the packet was received on 2.4 band
* @IWM_RX_RES_PHY_FLAGS_MOD_CCK:
* @IWM_RX_RES_PHY_FLAGS_SHORT_PREAMBLE: true if packet's preamble was short
* @IWM_RX_RES_PHY_FLAGS_NARROW_BAND:
* @IWM_RX_RES_PHY_FLAGS_ANTENNA: antenna on which the packet was received
* @IWM_RX_RES_PHY_FLAGS_AGG: set if the packet was part of an A-MPDU
* @IWM_RX_RES_PHY_FLAGS_OFDM_HT: The frame was an HT frame
* @IWM_RX_RES_PHY_FLAGS_OFDM_GF: The frame used GF preamble
* @IWM_RX_RES_PHY_FLAGS_OFDM_VHT: The frame was a VHT frame
*/
enum iwm_rx_phy_flags {
IWM_RX_RES_PHY_FLAGS_BAND_24 = (1 << 0),
IWM_RX_RES_PHY_FLAGS_MOD_CCK = (1 << 1),
IWM_RX_RES_PHY_FLAGS_SHORT_PREAMBLE = (1 << 2),
IWM_RX_RES_PHY_FLAGS_NARROW_BAND = (1 << 3),
IWM_RX_RES_PHY_FLAGS_ANTENNA = (0x7 << 4),
IWM_RX_RES_PHY_FLAGS_ANTENNA_POS = 4,
IWM_RX_RES_PHY_FLAGS_AGG = (1 << 7),
IWM_RX_RES_PHY_FLAGS_OFDM_HT = (1 << 8),
IWM_RX_RES_PHY_FLAGS_OFDM_GF = (1 << 9),
IWM_RX_RES_PHY_FLAGS_OFDM_VHT = (1 << 10),
};
/**
* enum iwm_mvm_rx_status - written by fw for each Rx packet
* @IWM_RX_MPDU_RES_STATUS_CRC_OK: CRC is fine
* @IWM_RX_MPDU_RES_STATUS_OVERRUN_OK: there was no RXE overflow
* @IWM_RX_MPDU_RES_STATUS_SRC_STA_FOUND:
* @IWM_RX_MPDU_RES_STATUS_KEY_VALID:
* @IWM_RX_MPDU_RES_STATUS_KEY_PARAM_OK:
* @IWM_RX_MPDU_RES_STATUS_ICV_OK: ICV is fine, if not, the packet is destroyed
* @IWM_RX_MPDU_RES_STATUS_MIC_OK: used for CCM alg only. TKIP MIC is checked
* in the driver.
* @IWM_RX_MPDU_RES_STATUS_TTAK_OK: TTAK is fine
* @IWM_RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR: valid for alg = CCM_CMAC or
* alg = CCM only. Checks replay attack for 11w frames. Relevant only if
* %IWM_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME is set.
* @IWM_RX_MPDU_RES_STATUS_SEC_NO_ENC: this frame is not encrypted
* @IWM_RX_MPDU_RES_STATUS_SEC_WEP_ENC: this frame is encrypted using WEP
* @IWM_RX_MPDU_RES_STATUS_SEC_CCM_ENC: this frame is encrypted using CCM
* @IWM_RX_MPDU_RES_STATUS_SEC_TKIP_ENC: this frame is encrypted using TKIP
* @IWM_RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC: this frame is encrypted using CCM_CMAC
* @IWM_RX_MPDU_RES_STATUS_SEC_ENC_ERR: this frame couldn't be decrypted
* @IWM_RX_MPDU_RES_STATUS_SEC_ENC_MSK: bitmask of the encryption algorithm
* @IWM_RX_MPDU_RES_STATUS_DEC_DONE: this frame has been successfully decrypted
* @IWM_RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP:
* @IWM_RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP:
* @IWM_RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT:
* @IWM_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME: this frame is an 11w management frame
* @IWM_RX_MPDU_RES_STATUS_HASH_INDEX_MSK:
* @IWM_RX_MPDU_RES_STATUS_STA_ID_MSK:
* @IWM_RX_MPDU_RES_STATUS_RRF_KILL:
* @IWM_RX_MPDU_RES_STATUS_FILTERING_MSK:
* @IWM_RX_MPDU_RES_STATUS2_FILTERING_MSK:
*/
enum iwm_mvm_rx_status {
IWM_RX_MPDU_RES_STATUS_CRC_OK = (1 << 0),
IWM_RX_MPDU_RES_STATUS_OVERRUN_OK = (1 << 1),
IWM_RX_MPDU_RES_STATUS_SRC_STA_FOUND = (1 << 2),
IWM_RX_MPDU_RES_STATUS_KEY_VALID = (1 << 3),
IWM_RX_MPDU_RES_STATUS_KEY_PARAM_OK = (1 << 4),
IWM_RX_MPDU_RES_STATUS_ICV_OK = (1 << 5),
IWM_RX_MPDU_RES_STATUS_MIC_OK = (1 << 6),
IWM_RX_MPDU_RES_STATUS_TTAK_OK = (1 << 7),
IWM_RX_MPDU_RES_STATUS_MNG_FRAME_REPLAY_ERR = (1 << 7),
IWM_RX_MPDU_RES_STATUS_SEC_NO_ENC = (0 << 8),
IWM_RX_MPDU_RES_STATUS_SEC_WEP_ENC = (1 << 8),
IWM_RX_MPDU_RES_STATUS_SEC_CCM_ENC = (2 << 8),
IWM_RX_MPDU_RES_STATUS_SEC_TKIP_ENC = (3 << 8),
IWM_RX_MPDU_RES_STATUS_SEC_EXT_ENC = (4 << 8),
IWM_RX_MPDU_RES_STATUS_SEC_CCM_CMAC_ENC = (6 << 8),
IWM_RX_MPDU_RES_STATUS_SEC_ENC_ERR = (7 << 8),
IWM_RX_MPDU_RES_STATUS_SEC_ENC_MSK = (7 << 8),
IWM_RX_MPDU_RES_STATUS_DEC_DONE = (1 << 11),
IWM_RX_MPDU_RES_STATUS_PROTECT_FRAME_BIT_CMP = (1 << 12),
IWM_RX_MPDU_RES_STATUS_EXT_IV_BIT_CMP = (1 << 13),
IWM_RX_MPDU_RES_STATUS_KEY_ID_CMP_BIT = (1 << 14),
IWM_RX_MPDU_RES_STATUS_ROBUST_MNG_FRAME = (1 << 15),
IWM_RX_MPDU_RES_STATUS_HASH_INDEX_MSK = (0x3F0000),
IWM_RX_MPDU_RES_STATUS_STA_ID_MSK = (0x1f000000),
IWM_RX_MPDU_RES_STATUS_RRF_KILL = (1 << 29),
IWM_RX_MPDU_RES_STATUS_FILTERING_MSK = (0xc00000),
IWM_RX_MPDU_RES_STATUS2_FILTERING_MSK = (0xc0000000),
};
/**
* struct iwm_radio_version_notif - information on the radio version
* ( IWM_RADIO_VERSION_NOTIFICATION = 0x68 )
* @radio_flavor:
* @radio_step:
* @radio_dash:
*/
struct iwm_radio_version_notif {
uint32_t radio_flavor;
uint32_t radio_step;
uint32_t radio_dash;
} __packed; /* IWM_RADIO_VERSION_NOTOFICATION_S_VER_1 */
enum iwm_card_state_flags {
IWM_CARD_ENABLED = 0x00,
IWM_HW_CARD_DISABLED = 0x01,
IWM_SW_CARD_DISABLED = 0x02,
IWM_CT_KILL_CARD_DISABLED = 0x04,
IWM_HALT_CARD_DISABLED = 0x08,
IWM_CARD_DISABLED_MSK = 0x0f,
IWM_CARD_IS_RX_ON = 0x10,
};
/**
* struct iwm_radio_version_notif - information on the radio version
* (IWM_CARD_STATE_NOTIFICATION = 0xa1 )
* @flags: %iwm_card_state_flags
*/
struct iwm_card_state_notif {
uint32_t flags;
} __packed; /* CARD_STATE_NTFY_API_S_VER_1 */
/**
* struct iwm_missed_beacons_notif - information on missed beacons
* ( IWM_MISSED_BEACONS_NOTIFICATION = 0xa2 )
* @mac_id: interface ID
* @consec_missed_beacons_since_last_rx: number of consecutive missed
* beacons since last RX.
* @consec_missed_beacons: number of consecutive missed beacons
* @num_expected_beacons:
* @num_recvd_beacons:
*/
struct iwm_missed_beacons_notif {
uint32_t mac_id;
uint32_t consec_missed_beacons_since_last_rx;
uint32_t consec_missed_beacons;
uint32_t num_expected_beacons;
uint32_t num_recvd_beacons;
} __packed; /* IWM_MISSED_BEACON_NTFY_API_S_VER_3 */
/**
* struct iwm_mfuart_load_notif - mfuart image version & status
* ( IWM_MFUART_LOAD_NOTIFICATION = 0xb1 )
* @installed_ver: installed image version
* @external_ver: external image version
* @status: MFUART loading status
* @duration: MFUART loading time
*/
struct iwm_mfuart_load_notif {
uint32_t installed_ver;
uint32_t external_ver;
uint32_t status;
uint32_t duration;
} __packed; /*MFU_LOADER_NTFY_API_S_VER_1*/
/**
* struct iwm_set_calib_default_cmd - set default value for calibration.
* ( IWM_SET_CALIB_DEFAULT_CMD = 0x8e )
* @calib_index: the calibration to set value for
* @length: of data
* @data: the value to set for the calibration result
*/
struct iwm_set_calib_default_cmd {
uint16_t calib_index;
uint16_t length;
uint8_t data[0];
} __packed; /* IWM_PHY_CALIB_OVERRIDE_VALUES_S */
#define IWM_MAX_PORT_ID_NUM 2
#define IWM_MAX_MCAST_FILTERING_ADDRESSES 256
/**
* struct iwm_mcast_filter_cmd - configure multicast filter.
* @filter_own: Set 1 to filter out multicast packets sent by station itself
* @port_id: Multicast MAC addresses array specifier. This is a strange way
* to identify network interface adopted in host-device IF.
* It is used by FW as index in array of addresses. This array has
* IWM_MAX_PORT_ID_NUM members.
* @count: Number of MAC addresses in the array
* @pass_all: Set 1 to pass all multicast packets.
* @bssid: current association BSSID.
* @addr_list: Place holder for array of MAC addresses.
* IMPORTANT: add padding if necessary to ensure DWORD alignment.
*/
struct iwm_mcast_filter_cmd {
uint8_t filter_own;
uint8_t port_id;
uint8_t count;
uint8_t pass_all;
uint8_t bssid[6];
uint8_t reserved[2];
uint8_t addr_list[0];
} __packed; /* IWM_MCAST_FILTERING_CMD_API_S_VER_1 */
/*
* The first MAC indices (starting from 0)
* are available to the driver, AUX follows
*/
#define IWM_MAC_INDEX_AUX 4
#define IWM_MAC_INDEX_MIN_DRIVER 0
#define IWM_NUM_MAC_INDEX_DRIVER IWM_MAC_INDEX_AUX
#define IWM_NUM_MAC_INDEX (IWM_MAC_INDEX_AUX + 1)
/***********************************
* Statistics API
***********************************/
struct iwm_mvm_statistics_dbg {
uint32_t burst_check;
uint32_t burst_count;
uint32_t wait_for_silence_timeout_cnt;
uint32_t reserved[3];
} __packed; /* IWM_STATISTICS_DEBUG_API_S_VER_2 */
struct iwm_mvm_statistics_div {
uint32_t tx_on_a;
uint32_t tx_on_b;
uint32_t exec_time;
uint32_t probe_time;
uint32_t rssi_ant;
uint32_t reserved2;
} __packed; /* IWM_STATISTICS_SLOW_DIV_API_S_VER_2 */
struct iwm_mvm_statistics_rx_non_phy {
uint32_t bogus_cts; /* CTS received when not expecting CTS */
uint32_t bogus_ack; /* ACK received when not expecting ACK */
uint32_t non_bssid_frames; /* number of frames with BSSID that
* doesn't belong to the STA BSSID */
uint32_t filtered_frames; /* count frames that were dumped in the
* filtering process */
uint32_t non_channel_beacons; /* beacons with our bss id but not on
* our serving channel */
uint32_t channel_beacons; /* beacons with our bss id and in our
* serving channel */
uint32_t num_missed_bcon; /* number of missed beacons */
uint32_t adc_rx_saturation_time; /* count in 0.8us units the time the
* ADC was in saturation */
uint32_t ina_detection_search_time;/* total time (in 0.8us) searched
* for INA */
uint32_t beacon_silence_rssi[3];/* RSSI silence after beacon frame */
uint32_t interference_data_flag; /* flag for interference data
* availability. 1 when data is
* available. */
uint32_t channel_load; /* counts RX Enable time in uSec */
uint32_t dsp_false_alarms; /* DSP false alarm (both OFDM
* and CCK) counter */
uint32_t beacon_rssi_a;
uint32_t beacon_rssi_b;
uint32_t beacon_rssi_c;
uint32_t beacon_energy_a;
uint32_t beacon_energy_b;
uint32_t beacon_energy_c;
uint32_t num_bt_kills;
uint32_t mac_id;
uint32_t directed_data_mpdu;
} __packed; /* IWM_STATISTICS_RX_NON_PHY_API_S_VER_3 */
struct iwm_mvm_statistics_rx_phy {
uint32_t ina_cnt;
uint32_t fina_cnt;
uint32_t plcp_err;
uint32_t crc32_err;
uint32_t overrun_err;
uint32_t early_overrun_err;
uint32_t crc32_good;
uint32_t false_alarm_cnt;
uint32_t fina_sync_err_cnt;
uint32_t sfd_timeout;
uint32_t fina_timeout;
uint32_t unresponded_rts;
uint32_t rxe_frame_limit_overrun;
uint32_t sent_ack_cnt;
uint32_t sent_cts_cnt;
uint32_t sent_ba_rsp_cnt;
uint32_t dsp_self_kill;
uint32_t mh_format_err;
uint32_t re_acq_main_rssi_sum;
uint32_t reserved;
} __packed; /* IWM_STATISTICS_RX_PHY_API_S_VER_2 */
struct iwm_mvm_statistics_rx_ht_phy {
uint32_t plcp_err;
uint32_t overrun_err;
uint32_t early_overrun_err;
uint32_t crc32_good;
uint32_t crc32_err;
uint32_t mh_format_err;
uint32_t agg_crc32_good;
uint32_t agg_mpdu_cnt;
uint32_t agg_cnt;
uint32_t unsupport_mcs;
} __packed; /* IWM_STATISTICS_HT_RX_PHY_API_S_VER_1 */
struct iwm_mvm_statistics_tx_non_phy {
uint32_t preamble_cnt;
uint32_t rx_detected_cnt;
uint32_t bt_prio_defer_cnt;
uint32_t bt_prio_kill_cnt;
uint32_t few_bytes_cnt;
uint32_t cts_timeout;
uint32_t ack_timeout;
uint32_t expected_ack_cnt;
uint32_t actual_ack_cnt;
uint32_t dump_msdu_cnt;
uint32_t burst_abort_next_frame_mismatch_cnt;
uint32_t burst_abort_missing_next_frame_cnt;
uint32_t cts_timeout_collision;
uint32_t ack_or_ba_timeout_collision;
} __packed; /* IWM_STATISTICS_TX_NON_PHY_API_S_VER_3 */
#define IWM_MAX_CHAINS 3
struct iwm_mvm_statistics_tx_non_phy_agg {
uint32_t ba_timeout;
uint32_t ba_reschedule_frames;
uint32_t scd_query_agg_frame_cnt;
uint32_t scd_query_no_agg;
uint32_t scd_query_agg;
uint32_t scd_query_mismatch;
uint32_t frame_not_ready;
uint32_t underrun;
uint32_t bt_prio_kill;
uint32_t rx_ba_rsp_cnt;
int8_t txpower[IWM_MAX_CHAINS];
int8_t reserved;
uint32_t reserved2;
} __packed; /* IWM_STATISTICS_TX_NON_PHY_AGG_API_S_VER_1 */
struct iwm_mvm_statistics_tx_channel_width {
uint32_t ext_cca_narrow_ch20[1];
uint32_t ext_cca_narrow_ch40[2];
uint32_t ext_cca_narrow_ch80[3];
uint32_t ext_cca_narrow_ch160[4];
uint32_t last_tx_ch_width_indx;
uint32_t rx_detected_per_ch_width[4];
uint32_t success_per_ch_width[4];
uint32_t fail_per_ch_width[4];
}; /* IWM_STATISTICS_TX_CHANNEL_WIDTH_API_S_VER_1 */
struct iwm_mvm_statistics_tx {
struct iwm_mvm_statistics_tx_non_phy general;
struct iwm_mvm_statistics_tx_non_phy_agg agg;
struct iwm_mvm_statistics_tx_channel_width channel_width;
} __packed; /* IWM_STATISTICS_TX_API_S_VER_4 */
struct iwm_mvm_statistics_bt_activity {
uint32_t hi_priority_tx_req_cnt;
uint32_t hi_priority_tx_denied_cnt;
uint32_t lo_priority_tx_req_cnt;
uint32_t lo_priority_tx_denied_cnt;
uint32_t hi_priority_rx_req_cnt;
uint32_t hi_priority_rx_denied_cnt;
uint32_t lo_priority_rx_req_cnt;
uint32_t lo_priority_rx_denied_cnt;
} __packed; /* IWM_STATISTICS_BT_ACTIVITY_API_S_VER_1 */
struct iwm_mvm_statistics_general_v8 {
uint32_t radio_temperature;
uint32_t radio_voltage;
struct iwm_mvm_statistics_dbg dbg;
uint32_t sleep_time;
uint32_t slots_out;
uint32_t slots_idle;
uint32_t ttl_timestamp;
struct iwm_mvm_statistics_div slow_div;
uint32_t rx_enable_counter;
/*
* num_of_sos_states:
* count the number of times we have to re-tune
* in order to get out of bad PHY status
*/
uint32_t num_of_sos_states;
uint32_t beacon_filtered;
uint32_t missed_beacons;
uint8_t beacon_filter_average_energy;
uint8_t beacon_filter_reason;
uint8_t beacon_filter_current_energy;
uint8_t beacon_filter_reserved;
uint32_t beacon_filter_delta_time;
struct iwm_mvm_statistics_bt_activity bt_activity;
uint64_t rx_time;
uint64_t on_time_rf;
uint64_t on_time_scan;
uint64_t tx_time;
uint32_t beacon_counter[IWM_NUM_MAC_INDEX];
uint8_t beacon_average_energy[IWM_NUM_MAC_INDEX];
uint8_t reserved[4 - (IWM_NUM_MAC_INDEX % 4)];
} __packed; /* IWM_STATISTICS_GENERAL_API_S_VER_8 */
struct iwm_mvm_statistics_rx {
struct iwm_mvm_statistics_rx_phy ofdm;
struct iwm_mvm_statistics_rx_phy cck;
struct iwm_mvm_statistics_rx_non_phy general;
struct iwm_mvm_statistics_rx_ht_phy ofdm_ht;
} __packed; /* IWM_STATISTICS_RX_API_S_VER_3 */
/*
* IWM_STATISTICS_NOTIFICATION = 0x9d (notification only, not a command)
*
* By default, uCode issues this notification after receiving a beacon
* while associated. To disable this behavior, set DISABLE_NOTIF flag in the
* IWM_STATISTICS_CMD (0x9c), below.
*/
struct iwm_notif_statistics_v10 {
uint32_t flag;
struct iwm_mvm_statistics_rx rx;
struct iwm_mvm_statistics_tx tx;
struct iwm_mvm_statistics_general_v8 general;
} __packed; /* IWM_STATISTICS_NTFY_API_S_VER_10 */
#define IWM_STATISTICS_FLG_CLEAR 0x1
#define IWM_STATISTICS_FLG_DISABLE_NOTIF 0x2
struct iwm_statistics_cmd {
uint32_t flags;
} __packed; /* IWM_STATISTICS_CMD_API_S_VER_1 */
/***********************************
* Smart Fifo API
***********************************/
/* Smart Fifo state */
enum iwm_sf_state {
IWM_SF_LONG_DELAY_ON = 0, /* should never be called by driver */
IWM_SF_FULL_ON,
IWM_SF_UNINIT,
IWM_SF_INIT_OFF,
IWM_SF_HW_NUM_STATES
};
/* Smart Fifo possible scenario */
enum iwm_sf_scenario {
IWM_SF_SCENARIO_SINGLE_UNICAST,
IWM_SF_SCENARIO_AGG_UNICAST,
IWM_SF_SCENARIO_MULTICAST,
IWM_SF_SCENARIO_BA_RESP,
IWM_SF_SCENARIO_TX_RESP,
IWM_SF_NUM_SCENARIO
};
#define IWM_SF_TRANSIENT_STATES_NUMBER 2 /* IWM_SF_LONG_DELAY_ON and IWM_SF_FULL_ON */
#define IWM_SF_NUM_TIMEOUT_TYPES 2 /* Aging timer and Idle timer */
/* smart FIFO default values */
#define IWM_SF_W_MARK_SISO 4096
#define IWM_SF_W_MARK_MIMO2 8192
#define IWM_SF_W_MARK_MIMO3 6144
#define IWM_SF_W_MARK_LEGACY 4096
#define IWM_SF_W_MARK_SCAN 4096
/* SF Scenarios timers for default configuration (aligned to 32 uSec) */
#define IWM_SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */
#define IWM_SF_SINGLE_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */
#define IWM_SF_AGG_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */
#define IWM_SF_AGG_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */
#define IWM_SF_MCAST_IDLE_TIMER_DEF 160 /* 150 uSec */
#define IWM_SF_MCAST_AGING_TIMER_DEF 400 /* 0.4 mSec */
#define IWM_SF_BA_IDLE_TIMER_DEF 160 /* 150 uSec */
#define IWM_SF_BA_AGING_TIMER_DEF 400 /* 0.4 mSec */
#define IWM_SF_TX_RE_IDLE_TIMER_DEF 160 /* 150 uSec */
#define IWM_SF_TX_RE_AGING_TIMER_DEF 400 /* 0.4 mSec */
/* SF Scenarios timers for FULL_ON state (aligned to 32 uSec) */
#define IWM_SF_SINGLE_UNICAST_IDLE_TIMER 320 /* 300 uSec */
#define IWM_SF_SINGLE_UNICAST_AGING_TIMER 2016 /* 2 mSec */
#define IWM_SF_AGG_UNICAST_IDLE_TIMER 320 /* 300 uSec */
#define IWM_SF_AGG_UNICAST_AGING_TIMER 2016 /* 2 mSec */
#define IWM_SF_MCAST_IDLE_TIMER 2016 /* 2 mSec */
#define IWM_SF_MCAST_AGING_TIMER 10016 /* 10 mSec */
#define IWM_SF_BA_IDLE_TIMER 320 /* 300 uSec */
#define IWM_SF_BA_AGING_TIMER 2016 /* 2 mSec */
#define IWM_SF_TX_RE_IDLE_TIMER 320 /* 300 uSec */
#define IWM_SF_TX_RE_AGING_TIMER 2016 /* 2 mSec */
#define IWM_SF_LONG_DELAY_AGING_TIMER 1000000 /* 1 Sec */
#define IWM_SF_CFG_DUMMY_NOTIF_OFF (1 << 16)
/**
* Smart Fifo configuration command.
* @state: smart fifo state, types listed in iwm_sf_state.
* @watermark: Minimum allowed available free space in RXF for transient state.
* @long_delay_timeouts: aging and idle timer values for each scenario
* in long delay state.
* @full_on_timeouts: timer values for each scenario in full on state.
*/
struct iwm_sf_cfg_cmd {
uint32_t state;
uint32_t watermark[IWM_SF_TRANSIENT_STATES_NUMBER];
uint32_t long_delay_timeouts[IWM_SF_NUM_SCENARIO][IWM_SF_NUM_TIMEOUT_TYPES];
uint32_t full_on_timeouts[IWM_SF_NUM_SCENARIO][IWM_SF_NUM_TIMEOUT_TYPES];
} __packed; /* IWM_SF_CFG_API_S_VER_2 */
/*
* END mvm/fw-api.h
*/
/*
* BEGIN mvm/fw-api-mac.h
*/
enum iwm_ac {
IWM_AC_BK,
IWM_AC_BE,
IWM_AC_VI,
IWM_AC_VO,
IWM_AC_NUM,
};
/**
* enum iwm_mac_protection_flags - MAC context flags
* @IWM_MAC_PROT_FLG_TGG_PROTECT: 11g protection when transmitting OFDM frames,
* this will require CCK RTS/CTS2self.
* RTS/CTS will protect full burst time.
* @IWM_MAC_PROT_FLG_HT_PROT: enable HT protection
* @IWM_MAC_PROT_FLG_FAT_PROT: protect 40 MHz transmissions
* @IWM_MAC_PROT_FLG_SELF_CTS_EN: allow CTS2self
*/
enum iwm_mac_protection_flags {
IWM_MAC_PROT_FLG_TGG_PROTECT = (1 << 3),
IWM_MAC_PROT_FLG_HT_PROT = (1 << 23),
IWM_MAC_PROT_FLG_FAT_PROT = (1 << 24),
IWM_MAC_PROT_FLG_SELF_CTS_EN = (1 << 30),
};
#define IWM_MAC_FLG_SHORT_SLOT (1 << 4)
#define IWM_MAC_FLG_SHORT_PREAMBLE (1 << 5)
/**
* enum iwm_mac_types - Supported MAC types
* @IWM_FW_MAC_TYPE_FIRST: lowest supported MAC type
* @IWM_FW_MAC_TYPE_AUX: Auxiliary MAC (internal)
* @IWM_FW_MAC_TYPE_LISTENER: monitor MAC type (?)
* @IWM_FW_MAC_TYPE_PIBSS: Pseudo-IBSS
* @IWM_FW_MAC_TYPE_IBSS: IBSS
* @IWM_FW_MAC_TYPE_BSS_STA: BSS (managed) station
* @IWM_FW_MAC_TYPE_P2P_DEVICE: P2P Device
* @IWM_FW_MAC_TYPE_P2P_STA: P2P client
* @IWM_FW_MAC_TYPE_GO: P2P GO
* @IWM_FW_MAC_TYPE_TEST: ?
* @IWM_FW_MAC_TYPE_MAX: highest support MAC type
*/
enum iwm_mac_types {
IWM_FW_MAC_TYPE_FIRST = 1,
IWM_FW_MAC_TYPE_AUX = IWM_FW_MAC_TYPE_FIRST,
IWM_FW_MAC_TYPE_LISTENER,
IWM_FW_MAC_TYPE_PIBSS,
IWM_FW_MAC_TYPE_IBSS,
IWM_FW_MAC_TYPE_BSS_STA,
IWM_FW_MAC_TYPE_P2P_DEVICE,
IWM_FW_MAC_TYPE_P2P_STA,
IWM_FW_MAC_TYPE_GO,
IWM_FW_MAC_TYPE_TEST,
IWM_FW_MAC_TYPE_MAX = IWM_FW_MAC_TYPE_TEST
}; /* IWM_MAC_CONTEXT_TYPE_API_E_VER_1 */
/**
* enum iwm_tsf_id - TSF hw timer ID
* @IWM_TSF_ID_A: use TSF A
* @IWM_TSF_ID_B: use TSF B
* @IWM_TSF_ID_C: use TSF C
* @IWM_TSF_ID_D: use TSF D
* @IWM_NUM_TSF_IDS: number of TSF timers available
*/
enum iwm_tsf_id {
IWM_TSF_ID_A = 0,
IWM_TSF_ID_B = 1,
IWM_TSF_ID_C = 2,
IWM_TSF_ID_D = 3,
IWM_NUM_TSF_IDS = 4,
}; /* IWM_TSF_ID_API_E_VER_1 */
/**
* struct iwm_mac_data_ap - configuration data for AP MAC context
* @beacon_time: beacon transmit time in system time
* @beacon_tsf: beacon transmit time in TSF
* @bi: beacon interval in TU
* @bi_reciprocal: 2^32 / bi
* @dtim_interval: dtim transmit time in TU
* @dtim_reciprocal: 2^32 / dtim_interval
* @mcast_qid: queue ID for multicast traffic
* @beacon_template: beacon template ID
*/
struct iwm_mac_data_ap {
uint32_t beacon_time;
uint64_t beacon_tsf;
uint32_t bi;
uint32_t bi_reciprocal;
uint32_t dtim_interval;
uint32_t dtim_reciprocal;
uint32_t mcast_qid;
uint32_t beacon_template;
} __packed; /* AP_MAC_DATA_API_S_VER_1 */
/**
* struct iwm_mac_data_ibss - configuration data for IBSS MAC context
* @beacon_time: beacon transmit time in system time
* @beacon_tsf: beacon transmit time in TSF
* @bi: beacon interval in TU
* @bi_reciprocal: 2^32 / bi
* @beacon_template: beacon template ID
*/
struct iwm_mac_data_ibss {
uint32_t beacon_time;
uint64_t beacon_tsf;
uint32_t bi;
uint32_t bi_reciprocal;
uint32_t beacon_template;
} __packed; /* IBSS_MAC_DATA_API_S_VER_1 */
/**
* struct iwm_mac_data_sta - configuration data for station MAC context
* @is_assoc: 1 for associated state, 0 otherwise
* @dtim_time: DTIM arrival time in system time
* @dtim_tsf: DTIM arrival time in TSF
* @bi: beacon interval in TU, applicable only when associated
* @bi_reciprocal: 2^32 / bi , applicable only when associated
* @dtim_interval: DTIM interval in TU, applicable only when associated
* @dtim_reciprocal: 2^32 / dtim_interval , applicable only when associated
* @listen_interval: in beacon intervals, applicable only when associated
* @assoc_id: unique ID assigned by the AP during association
*/
struct iwm_mac_data_sta {
uint32_t is_assoc;
uint32_t dtim_time;
uint64_t dtim_tsf;
uint32_t bi;
uint32_t bi_reciprocal;
uint32_t dtim_interval;
uint32_t dtim_reciprocal;
uint32_t listen_interval;
uint32_t assoc_id;
uint32_t assoc_beacon_arrive_time;
} __packed; /* IWM_STA_MAC_DATA_API_S_VER_1 */
/**
* struct iwm_mac_data_go - configuration data for P2P GO MAC context
* @ap: iwm_mac_data_ap struct with most config data
* @ctwin: client traffic window in TU (period after TBTT when GO is present).
* 0 indicates that there is no CT window.
* @opp_ps_enabled: indicate that opportunistic PS allowed
*/
struct iwm_mac_data_go {
struct iwm_mac_data_ap ap;
uint32_t ctwin;
uint32_t opp_ps_enabled;
} __packed; /* GO_MAC_DATA_API_S_VER_1 */
/**
* struct iwm_mac_data_p2p_sta - configuration data for P2P client MAC context
* @sta: iwm_mac_data_sta struct with most config data
* @ctwin: client traffic window in TU (period after TBTT when GO is present).
* 0 indicates that there is no CT window.
*/
struct iwm_mac_data_p2p_sta {
struct iwm_mac_data_sta sta;
uint32_t ctwin;
} __packed; /* P2P_STA_MAC_DATA_API_S_VER_1 */
/**
* struct iwm_mac_data_pibss - Pseudo IBSS config data
* @stats_interval: interval in TU between statistics notifications to host.
*/
struct iwm_mac_data_pibss {
uint32_t stats_interval;
} __packed; /* PIBSS_MAC_DATA_API_S_VER_1 */
/*
* struct iwm_mac_data_p2p_dev - configuration data for the P2P Device MAC
* context.
* @is_disc_extended: if set to true, P2P Device discoverability is enabled on
* other channels as well. This should be to true only in case that the
* device is discoverable and there is an active GO. Note that setting this
* field when not needed, will increase the number of interrupts and have
* effect on the platform power, as this setting opens the Rx filters on
* all macs.
*/
struct iwm_mac_data_p2p_dev {
uint32_t is_disc_extended;
} __packed; /* _P2P_DEV_MAC_DATA_API_S_VER_1 */
/**
* enum iwm_mac_filter_flags - MAC context filter flags
* @IWM_MAC_FILTER_IN_PROMISC: accept all data frames
* @IWM_MAC_FILTER_IN_CONTROL_AND_MGMT: pass all mangement and
* control frames to the host
* @IWM_MAC_FILTER_ACCEPT_GRP: accept multicast frames
* @IWM_MAC_FILTER_DIS_DECRYPT: don't decrypt unicast frames
* @IWM_MAC_FILTER_DIS_GRP_DECRYPT: don't decrypt multicast frames
* @IWM_MAC_FILTER_IN_BEACON: transfer foreign BSS's beacons to host
* (in station mode when associated)
* @IWM_MAC_FILTER_OUT_BCAST: filter out all broadcast frames
* @IWM_MAC_FILTER_IN_CRC32: extract FCS and append it to frames
* @IWM_MAC_FILTER_IN_PROBE_REQUEST: pass probe requests to host
*/
enum iwm_mac_filter_flags {
IWM_MAC_FILTER_IN_PROMISC = (1 << 0),
IWM_MAC_FILTER_IN_CONTROL_AND_MGMT = (1 << 1),
IWM_MAC_FILTER_ACCEPT_GRP = (1 << 2),
IWM_MAC_FILTER_DIS_DECRYPT = (1 << 3),
IWM_MAC_FILTER_DIS_GRP_DECRYPT = (1 << 4),
IWM_MAC_FILTER_IN_BEACON = (1 << 6),
IWM_MAC_FILTER_OUT_BCAST = (1 << 8),
IWM_MAC_FILTER_IN_CRC32 = (1 << 11),
IWM_MAC_FILTER_IN_PROBE_REQUEST = (1 << 12),
};
/**
* enum iwm_mac_qos_flags - QoS flags
* @IWM_MAC_QOS_FLG_UPDATE_EDCA: ?
* @IWM_MAC_QOS_FLG_TGN: HT is enabled
* @IWM_MAC_QOS_FLG_TXOP_TYPE: ?
*
*/
enum iwm_mac_qos_flags {
IWM_MAC_QOS_FLG_UPDATE_EDCA = (1 << 0),
IWM_MAC_QOS_FLG_TGN = (1 << 1),
IWM_MAC_QOS_FLG_TXOP_TYPE = (1 << 4),
};
/**
* struct iwm_ac_qos - QOS timing params for IWM_MAC_CONTEXT_CMD
* @cw_min: Contention window, start value in numbers of slots.
* Should be a power-of-2, minus 1. Device's default is 0x0f.
* @cw_max: Contention window, max value in numbers of slots.
* Should be a power-of-2, minus 1. Device's default is 0x3f.
* @aifsn: Number of slots in Arbitration Interframe Space (before
* performing random backoff timing prior to Tx). Device default 1.
* @fifos_mask: FIFOs used by this MAC for this AC
* @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0.
*
* One instance of this config struct for each of 4 EDCA access categories
* in struct iwm_qosparam_cmd.
*
* Device will automatically increase contention window by (2*CW) + 1 for each
* transmission retry. Device uses cw_max as a bit mask, ANDed with new CW
* value, to cap the CW value.
*/
struct iwm_ac_qos {
uint16_t cw_min;
uint16_t cw_max;
uint8_t aifsn;
uint8_t fifos_mask;
uint16_t edca_txop;
} __packed; /* IWM_AC_QOS_API_S_VER_2 */
/**
* struct iwm_mac_ctx_cmd - command structure to configure MAC contexts
* ( IWM_MAC_CONTEXT_CMD = 0x28 )
* @id_and_color: ID and color of the MAC
* @action: action to perform, one of IWM_FW_CTXT_ACTION_*
* @mac_type: one of IWM_FW_MAC_TYPE_*
* @tsd_id: TSF HW timer, one of IWM_TSF_ID_*
* @node_addr: MAC address
* @bssid_addr: BSSID
* @cck_rates: basic rates available for CCK
* @ofdm_rates: basic rates available for OFDM
* @protection_flags: combination of IWM_MAC_PROT_FLG_FLAG_*
* @cck_short_preamble: 0x20 for enabling short preamble, 0 otherwise
* @short_slot: 0x10 for enabling short slots, 0 otherwise
* @filter_flags: combination of IWM_MAC_FILTER_*
* @qos_flags: from IWM_MAC_QOS_FLG_*
* @ac: one iwm_mac_qos configuration for each AC
* @mac_specific: one of struct iwm_mac_data_*, according to mac_type
*/
struct iwm_mac_ctx_cmd {
/* COMMON_INDEX_HDR_API_S_VER_1 */
uint32_t id_and_color;
uint32_t action;
/* IWM_MAC_CONTEXT_COMMON_DATA_API_S_VER_1 */
uint32_t mac_type;
uint32_t tsf_id;
uint8_t node_addr[6];
uint16_t reserved_for_node_addr;
uint8_t bssid_addr[6];
uint16_t reserved_for_bssid_addr;
uint32_t cck_rates;
uint32_t ofdm_rates;
uint32_t protection_flags;
uint32_t cck_short_preamble;
uint32_t short_slot;
uint32_t filter_flags;
/* IWM_MAC_QOS_PARAM_API_S_VER_1 */
uint32_t qos_flags;
struct iwm_ac_qos ac[IWM_AC_NUM+1];
/* IWM_MAC_CONTEXT_COMMON_DATA_API_S */
union {
struct iwm_mac_data_ap ap;
struct iwm_mac_data_go go;
struct iwm_mac_data_sta sta;
struct iwm_mac_data_p2p_sta p2p_sta;
struct iwm_mac_data_p2p_dev p2p_dev;
struct iwm_mac_data_pibss pibss;
struct iwm_mac_data_ibss ibss;
};
} __packed; /* IWM_MAC_CONTEXT_CMD_API_S_VER_1 */
static inline uint32_t iwm_mvm_reciprocal(uint32_t v)
{
if (!v)
return 0;
return 0xFFFFFFFF / v;
}
#define IWM_NONQOS_SEQ_GET 0x1
#define IWM_NONQOS_SEQ_SET 0x2
struct iwm_nonqos_seq_query_cmd {
uint32_t get_set_flag;
uint32_t mac_id_n_color;
uint16_t value;
uint16_t reserved;
} __packed; /* IWM_NON_QOS_TX_COUNTER_GET_SET_API_S_VER_1 */
/*
* END mvm/fw-api-mac.h
*/
/*
* BEGIN mvm/fw-api-power.h
*/
/* Power Management Commands, Responses, Notifications */
/**
* enum iwm_ltr_config_flags - masks for LTR config command flags
* @IWM_LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status
* @IWM_LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow
* memory access
* @IWM_LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR
* reg change
* @IWM_LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from
* D0 to D3
* @IWM_LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register
* @IWM_LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register
* @IWM_LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD
*/
enum iwm_ltr_config_flags {
IWM_LTR_CFG_FLAG_FEATURE_ENABLE = (1 << 0),
IWM_LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS = (1 << 1),
IWM_LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH = (1 << 2),
IWM_LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 = (1 << 3),
IWM_LTR_CFG_FLAG_SW_SET_SHORT = (1 << 4),
IWM_LTR_CFG_FLAG_SW_SET_LONG = (1 << 5),
IWM_LTR_CFG_FLAG_DENIE_C10_ON_PD = (1 << 6),
};
/**
* struct iwm_ltr_config_cmd_v1 - configures the LTR
* @flags: See %enum iwm_ltr_config_flags
*/
struct iwm_ltr_config_cmd_v1 {
uint32_t flags;
uint32_t static_long;
uint32_t static_short;
} __packed; /* LTR_CAPABLE_API_S_VER_1 */
#define IWM_LTR_VALID_STATES_NUM 4
/**
* struct iwm_ltr_config_cmd - configures the LTR
* @flags: See %enum iwm_ltr_config_flags
* @static_long:
* @static_short:
* @ltr_cfg_values:
* @ltr_short_idle_timeout:
*/
struct iwm_ltr_config_cmd {
uint32_t flags;
uint32_t static_long;
uint32_t static_short;
uint32_t ltr_cfg_values[IWM_LTR_VALID_STATES_NUM];
uint32_t ltr_short_idle_timeout;
} __packed; /* LTR_CAPABLE_API_S_VER_2 */
/* Radio LP RX Energy Threshold measured in dBm */
#define IWM_POWER_LPRX_RSSI_THRESHOLD 75
#define IWM_POWER_LPRX_RSSI_THRESHOLD_MAX 94
#define IWM_POWER_LPRX_RSSI_THRESHOLD_MIN 30
/**
* enum iwm_scan_flags - masks for power table command flags
* @IWM_POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off
* receiver and transmitter. '0' - does not allow.
* @IWM_POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management,
* '1' Driver enables PM (use rest of parameters)
* @IWM_POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM,
* '1' PM could sleep over DTIM till listen Interval.
* @IWM_POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all
* access categories are both delivery and trigger enabled.
* @IWM_POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and
* PBW Snoozing enabled
* @IWM_POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask
* @IWM_POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable.
* @IWM_POWER_FLAGS_AP_UAPSD_MISBEHAVING_ENA_MSK: AP/GO's uAPSD misbehaving
* detection enablement
*/
enum iwm_power_flags {
IWM_POWER_FLAGS_POWER_SAVE_ENA_MSK = (1 << 0),
IWM_POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK = (1 << 1),
IWM_POWER_FLAGS_SKIP_OVER_DTIM_MSK = (1 << 2),
IWM_POWER_FLAGS_SNOOZE_ENA_MSK = (1 << 5),
IWM_POWER_FLAGS_BT_SCO_ENA = (1 << 8),
IWM_POWER_FLAGS_ADVANCE_PM_ENA_MSK = (1 << 9),
IWM_POWER_FLAGS_LPRX_ENA_MSK = (1 << 11),
IWM_POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK = (1 << 12),
};
#define IWM_POWER_VEC_SIZE 5
/**
* struct iwm_powertable_cmd - legacy power command. Beside old API support this
* is used also with a new power API for device wide power settings.
* IWM_POWER_TABLE_CMD = 0x77 (command, has simple generic response)
*
* @flags: Power table command flags from IWM_POWER_FLAGS_*
* @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec.
* Minimum allowed:- 3 * DTIM. Keep alive period must be
* set regardless of power scheme or current power state.
* FW use this value also when PM is disabled.
* @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to
* PSM transition - legacy PM
* @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to
* PSM transition - legacy PM
* @sleep_interval: not in use
* @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag
* is set. For example, if it is required to skip over
* one DTIM, this value need to be set to 2 (DTIM periods).
* @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled.
* Default: 80dbm
*/
struct iwm_powertable_cmd {
/* PM_POWER_TABLE_CMD_API_S_VER_6 */
uint16_t flags;
uint8_t keep_alive_seconds;
uint8_t debug_flags;
uint32_t rx_data_timeout;
uint32_t tx_data_timeout;
uint32_t sleep_interval[IWM_POWER_VEC_SIZE];
uint32_t skip_dtim_periods;
uint32_t lprx_rssi_threshold;
} __packed;
/**
* enum iwm_device_power_flags - masks for device power command flags
* @IWM_DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off
* receiver and transmitter. '0' - does not allow.
*/
enum iwm_device_power_flags {
IWM_DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK = (1 << 0),
};
/**
* struct iwm_device_power_cmd - device wide power command.
* IWM_DEVICE_POWER_CMD = 0x77 (command, has simple generic response)
*
* @flags: Power table command flags from IWM_DEVICE_POWER_FLAGS_*
*/
struct iwm_device_power_cmd {
/* PM_POWER_TABLE_CMD_API_S_VER_6 */
uint16_t flags;
uint16_t reserved;
} __packed;
/**
* struct iwm_mac_power_cmd - New power command containing uAPSD support
* IWM_MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response)
* @id_and_color: MAC contex identifier
* @flags: Power table command flags from POWER_FLAGS_*
* @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec.
* Minimum allowed:- 3 * DTIM. Keep alive period must be
* set regardless of power scheme or current power state.
* FW use this value also when PM is disabled.
* @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to
* PSM transition - legacy PM
* @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to
* PSM transition - legacy PM
* @sleep_interval: not in use
* @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag
* is set. For example, if it is required to skip over
* one DTIM, this value need to be set to 2 (DTIM periods).
* @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to
* PSM transition - uAPSD
* @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to
* PSM transition - uAPSD
* @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled.
* Default: 80dbm
* @num_skip_dtim: Number of DTIMs to skip if Skip over DTIM flag is set
* @snooze_interval: Maximum time between attempts to retrieve buffered data
* from the AP [msec]
* @snooze_window: A window of time in which PBW snoozing insures that all
* packets received. It is also the minimum time from last
* received unicast RX packet, before client stops snoozing
* for data. [msec]
* @snooze_step: TBD
* @qndp_tid: TID client shall use for uAPSD QNDP triggers
* @uapsd_ac_flags: Set trigger-enabled and delivery-enabled indication for
* each corresponding AC.
* Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values.
* @uapsd_max_sp: Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct
* values.
* @heavy_tx_thld_packets: TX threshold measured in number of packets
* @heavy_rx_thld_packets: RX threshold measured in number of packets
* @heavy_tx_thld_percentage: TX threshold measured in load's percentage
* @heavy_rx_thld_percentage: RX threshold measured in load's percentage
* @limited_ps_threshold:
*/
struct iwm_mac_power_cmd {
/* CONTEXT_DESC_API_T_VER_1 */
uint32_t id_and_color;
/* CLIENT_PM_POWER_TABLE_S_VER_1 */
uint16_t flags;
uint16_t keep_alive_seconds;
uint32_t rx_data_timeout;
uint32_t tx_data_timeout;
uint32_t rx_data_timeout_uapsd;
uint32_t tx_data_timeout_uapsd;
uint8_t lprx_rssi_threshold;
uint8_t skip_dtim_periods;
uint16_t snooze_interval;
uint16_t snooze_window;
uint8_t snooze_step;
uint8_t qndp_tid;
uint8_t uapsd_ac_flags;
uint8_t uapsd_max_sp;
uint8_t heavy_tx_thld_packets;
uint8_t heavy_rx_thld_packets;
uint8_t heavy_tx_thld_percentage;
uint8_t heavy_rx_thld_percentage;
uint8_t limited_ps_threshold;
uint8_t reserved;
} __packed;
/*
* struct iwm_uapsd_misbehaving_ap_notif - FW sends this notification when
* associated AP is identified as improperly implementing uAPSD protocol.
* IWM_PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78
* @sta_id: index of station in uCode's station table - associated AP ID in
* this context.
*/
struct iwm_uapsd_misbehaving_ap_notif {
uint32_t sta_id;
uint8_t mac_id;
uint8_t reserved[3];
} __packed;
/**
* struct iwm_beacon_filter_cmd
* IWM_REPLY_BEACON_FILTERING_CMD = 0xd2 (command)
* @id_and_color: MAC contex identifier
* @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon
* to driver if delta in Energy values calculated for this and last
* passed beacon is greater than this threshold. Zero value means that
* the Energy change is ignored for beacon filtering, and beacon will
* not be forced to be sent to driver regardless of this delta. Typical
* energy delta 5dB.
* @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state.
* Send beacon to driver if delta in Energy values calculated for this
* and last passed beacon is greater than this threshold. Zero value
* means that the Energy change is ignored for beacon filtering while in
* Roaming state, typical energy delta 1dB.
* @bf_roaming_state: Used for RSSI filtering. If absolute Energy values
* calculated for current beacon is less than the threshold, use
* Roaming Energy Delta Threshold, otherwise use normal Energy Delta
* Threshold. Typical energy threshold is -72dBm.
* @bf_temp_threshold: This threshold determines the type of temperature
* filtering (Slow or Fast) that is selected (Units are in Celsuis):
* If the current temperature is above this threshold - Fast filter
* will be used, If the current temperature is below this threshold -
* Slow filter will be used.
* @bf_temp_fast_filter: Send Beacon to driver if delta in temperature values
* calculated for this and the last passed beacon is greater than this
* threshold. Zero value means that the temperature change is ignored for
* beacon filtering; beacons will not be forced to be sent to driver
* regardless of whether its temperature has been changed.
* @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values
* calculated for this and the last passed beacon is greater than this
* threshold. Zero value means that the temperature change is ignored for
* beacon filtering; beacons will not be forced to be sent to driver
* regardless of whether its temperature has been changed.
* @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled.
* @bf_filter_escape_timer: Send beacons to the driver if no beacons were passed
* for a specific period of time. Units: Beacons.
* @ba_escape_timer: Fully receive and parse beacon if no beacons were passed
* for a longer period of time then this escape-timeout. Units: Beacons.
* @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled.
*/
struct iwm_beacon_filter_cmd {
uint32_t bf_energy_delta;
uint32_t bf_roaming_energy_delta;
uint32_t bf_roaming_state;
uint32_t bf_temp_threshold;
uint32_t bf_temp_fast_filter;
uint32_t bf_temp_slow_filter;
uint32_t bf_enable_beacon_filter;
uint32_t bf_debug_flag;
uint32_t bf_escape_timer;
uint32_t ba_escape_timer;
uint32_t ba_enable_beacon_abort;
} __packed;
/* Beacon filtering and beacon abort */
#define IWM_BF_ENERGY_DELTA_DEFAULT 5
#define IWM_BF_ENERGY_DELTA_MAX 255
#define IWM_BF_ENERGY_DELTA_MIN 0
#define IWM_BF_ROAMING_ENERGY_DELTA_DEFAULT 1
#define IWM_BF_ROAMING_ENERGY_DELTA_MAX 255
#define IWM_BF_ROAMING_ENERGY_DELTA_MIN 0
#define IWM_BF_ROAMING_STATE_DEFAULT 72
#define IWM_BF_ROAMING_STATE_MAX 255
#define IWM_BF_ROAMING_STATE_MIN 0
#define IWM_BF_TEMP_THRESHOLD_DEFAULT 112
#define IWM_BF_TEMP_THRESHOLD_MAX 255
#define IWM_BF_TEMP_THRESHOLD_MIN 0
#define IWM_BF_TEMP_FAST_FILTER_DEFAULT 1
#define IWM_BF_TEMP_FAST_FILTER_MAX 255
#define IWM_BF_TEMP_FAST_FILTER_MIN 0
#define IWM_BF_TEMP_SLOW_FILTER_DEFAULT 5
#define IWM_BF_TEMP_SLOW_FILTER_MAX 255
#define IWM_BF_TEMP_SLOW_FILTER_MIN 0
#define IWM_BF_ENABLE_BEACON_FILTER_DEFAULT 1
#define IWM_BF_DEBUG_FLAG_DEFAULT 0
#define IWM_BF_ESCAPE_TIMER_DEFAULT 50
#define IWM_BF_ESCAPE_TIMER_MAX 1024
#define IWM_BF_ESCAPE_TIMER_MIN 0
#define IWM_BA_ESCAPE_TIMER_DEFAULT 6
#define IWM_BA_ESCAPE_TIMER_D3 9
#define IWM_BA_ESCAPE_TIMER_MAX 1024
#define IWM_BA_ESCAPE_TIMER_MIN 0
#define IWM_BA_ENABLE_BEACON_ABORT_DEFAULT 1
#define IWM_BF_CMD_CONFIG_DEFAULTS \
.bf_energy_delta = htole32(IWM_BF_ENERGY_DELTA_DEFAULT), \
.bf_roaming_energy_delta = \
htole32(IWM_BF_ROAMING_ENERGY_DELTA_DEFAULT), \
.bf_roaming_state = htole32(IWM_BF_ROAMING_STATE_DEFAULT), \
.bf_temp_threshold = htole32(IWM_BF_TEMP_THRESHOLD_DEFAULT), \
.bf_temp_fast_filter = htole32(IWM_BF_TEMP_FAST_FILTER_DEFAULT), \
.bf_temp_slow_filter = htole32(IWM_BF_TEMP_SLOW_FILTER_DEFAULT), \
.bf_debug_flag = htole32(IWM_BF_DEBUG_FLAG_DEFAULT), \
.bf_escape_timer = htole32(IWM_BF_ESCAPE_TIMER_DEFAULT), \
.ba_escape_timer = htole32(IWM_BA_ESCAPE_TIMER_DEFAULT)
/*
* END mvm/fw-api-power.h
*/
/*
* BEGIN mvm/fw-api-rs.h
*/
/*
* These serve as indexes into
* struct iwm_rate_info fw_rate_idx_to_plcp[IWM_RATE_COUNT];
* TODO: avoid overlap between legacy and HT rates
*/
enum {
IWM_RATE_1M_INDEX = 0,
IWM_FIRST_CCK_RATE = IWM_RATE_1M_INDEX,
IWM_RATE_2M_INDEX,
IWM_RATE_5M_INDEX,
IWM_RATE_11M_INDEX,
IWM_LAST_CCK_RATE = IWM_RATE_11M_INDEX,
IWM_RATE_6M_INDEX,
IWM_FIRST_OFDM_RATE = IWM_RATE_6M_INDEX,
IWM_RATE_MCS_0_INDEX = IWM_RATE_6M_INDEX,
IWM_FIRST_HT_RATE = IWM_RATE_MCS_0_INDEX,
IWM_FIRST_VHT_RATE = IWM_RATE_MCS_0_INDEX,
IWM_RATE_9M_INDEX,
IWM_RATE_12M_INDEX,
IWM_RATE_MCS_1_INDEX = IWM_RATE_12M_INDEX,
IWM_RATE_18M_INDEX,
IWM_RATE_MCS_2_INDEX = IWM_RATE_18M_INDEX,
IWM_RATE_24M_INDEX,
IWM_RATE_MCS_3_INDEX = IWM_RATE_24M_INDEX,
IWM_RATE_36M_INDEX,
IWM_RATE_MCS_4_INDEX = IWM_RATE_36M_INDEX,
IWM_RATE_48M_INDEX,
IWM_RATE_MCS_5_INDEX = IWM_RATE_48M_INDEX,
IWM_RATE_54M_INDEX,
IWM_RATE_MCS_6_INDEX = IWM_RATE_54M_INDEX,
IWM_LAST_NON_HT_RATE = IWM_RATE_54M_INDEX,
IWM_RATE_60M_INDEX,
IWM_RATE_MCS_7_INDEX = IWM_RATE_60M_INDEX,
IWM_LAST_HT_RATE = IWM_RATE_MCS_7_INDEX,
IWM_RATE_MCS_8_INDEX,
IWM_RATE_MCS_9_INDEX,
IWM_LAST_VHT_RATE = IWM_RATE_MCS_9_INDEX,
IWM_RATE_COUNT_LEGACY = IWM_LAST_NON_HT_RATE + 1,
IWM_RATE_COUNT = IWM_LAST_VHT_RATE + 1,
};
#define IWM_RATE_BIT_MSK(r) (1 << (IWM_RATE_##r##M_INDEX))
/* fw API values for legacy bit rates, both OFDM and CCK */
enum {
IWM_RATE_6M_PLCP = 13,
IWM_RATE_9M_PLCP = 15,
IWM_RATE_12M_PLCP = 5,
IWM_RATE_18M_PLCP = 7,
IWM_RATE_24M_PLCP = 9,
IWM_RATE_36M_PLCP = 11,
IWM_RATE_48M_PLCP = 1,
IWM_RATE_54M_PLCP = 3,
IWM_RATE_1M_PLCP = 10,
IWM_RATE_2M_PLCP = 20,
IWM_RATE_5M_PLCP = 55,
IWM_RATE_11M_PLCP = 110,
IWM_RATE_INVM_PLCP = -1,
};
/*
* rate_n_flags bit fields
*
* The 32-bit value has different layouts in the low 8 bites depending on the
* format. There are three formats, HT, VHT and legacy (11abg, with subformats
* for CCK and OFDM).
*
* High-throughput (HT) rate format
* bit 8 is 1, bit 26 is 0, bit 9 is 0 (OFDM)
* Very High-throughput (VHT) rate format
* bit 8 is 0, bit 26 is 1, bit 9 is 0 (OFDM)
* Legacy OFDM rate format for bits 7:0
* bit 8 is 0, bit 26 is 0, bit 9 is 0 (OFDM)
* Legacy CCK rate format for bits 7:0:
* bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK)
*/
/* Bit 8: (1) HT format, (0) legacy or VHT format */
#define IWM_RATE_MCS_HT_POS 8
#define IWM_RATE_MCS_HT_MSK (1 << IWM_RATE_MCS_HT_POS)
/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */
#define IWM_RATE_MCS_CCK_POS 9
#define IWM_RATE_MCS_CCK_MSK (1 << IWM_RATE_MCS_CCK_POS)
/* Bit 26: (1) VHT format, (0) legacy format in bits 8:0 */
#define IWM_RATE_MCS_VHT_POS 26
#define IWM_RATE_MCS_VHT_MSK (1 << IWM_RATE_MCS_VHT_POS)
/*
* High-throughput (HT) rate format for bits 7:0
*
* 2-0: MCS rate base
* 0) 6 Mbps
* 1) 12 Mbps
* 2) 18 Mbps
* 3) 24 Mbps
* 4) 36 Mbps
* 5) 48 Mbps
* 6) 54 Mbps
* 7) 60 Mbps
* 4-3: 0) Single stream (SISO)
* 1) Dual stream (MIMO)
* 2) Triple stream (MIMO)
* 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data
* (bits 7-6 are zero)
*
* Together the low 5 bits work out to the MCS index because we don't
* support MCSes above 15/23, and 0-7 have one stream, 8-15 have two
* streams and 16-23 have three streams. We could also support MCS 32
* which is the duplicate 20 MHz MCS (bit 5 set, all others zero.)
*/
#define IWM_RATE_HT_MCS_RATE_CODE_MSK 0x7
#define IWM_RATE_HT_MCS_NSS_POS 3
#define IWM_RATE_HT_MCS_NSS_MSK (3 << IWM_RATE_HT_MCS_NSS_POS)
/* Bit 10: (1) Use Green Field preamble */
#define IWM_RATE_HT_MCS_GF_POS 10
#define IWM_RATE_HT_MCS_GF_MSK (1 << IWM_RATE_HT_MCS_GF_POS)
#define IWM_RATE_HT_MCS_INDEX_MSK 0x3f
/*
* Very High-throughput (VHT) rate format for bits 7:0
*
* 3-0: VHT MCS (0-9)
* 5-4: number of streams - 1:
* 0) Single stream (SISO)
* 1) Dual stream (MIMO)
* 2) Triple stream (MIMO)
*/
/* Bit 4-5: (0) SISO, (1) MIMO2 (2) MIMO3 */
#define IWM_RATE_VHT_MCS_RATE_CODE_MSK 0xf
#define IWM_RATE_VHT_MCS_NSS_POS 4
#define IWM_RATE_VHT_MCS_NSS_MSK (3 << IWM_RATE_VHT_MCS_NSS_POS)
/*
* Legacy OFDM rate format for bits 7:0
*
* 3-0: 0xD) 6 Mbps
* 0xF) 9 Mbps
* 0x5) 12 Mbps
* 0x7) 18 Mbps
* 0x9) 24 Mbps
* 0xB) 36 Mbps
* 0x1) 48 Mbps
* 0x3) 54 Mbps
* (bits 7-4 are 0)
*
* Legacy CCK rate format for bits 7:0:
* bit 8 is 0, bit 26 is 0, bit 9 is 1 (CCK):
*
* 6-0: 10) 1 Mbps
* 20) 2 Mbps
* 55) 5.5 Mbps
* 110) 11 Mbps
* (bit 7 is 0)
*/
#define IWM_RATE_LEGACY_RATE_MSK 0xff
/*
* Bit 11-12: (0) 20MHz, (1) 40MHz, (2) 80MHz, (3) 160MHz
* 0 and 1 are valid for HT and VHT, 2 and 3 only for VHT
*/
#define IWM_RATE_MCS_CHAN_WIDTH_POS 11
#define IWM_RATE_MCS_CHAN_WIDTH_MSK (3 << IWM_RATE_MCS_CHAN_WIDTH_POS)
#define IWM_RATE_MCS_CHAN_WIDTH_20 (0 << IWM_RATE_MCS_CHAN_WIDTH_POS)
#define IWM_RATE_MCS_CHAN_WIDTH_40 (1 << IWM_RATE_MCS_CHAN_WIDTH_POS)
#define IWM_RATE_MCS_CHAN_WIDTH_80 (2 << IWM_RATE_MCS_CHAN_WIDTH_POS)
#define IWM_RATE_MCS_CHAN_WIDTH_160 (3 << IWM_RATE_MCS_CHAN_WIDTH_POS)
/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */
#define IWM_RATE_MCS_SGI_POS 13
#define IWM_RATE_MCS_SGI_MSK (1 << IWM_RATE_MCS_SGI_POS)
/* Bit 14-16: Antenna selection (1) Ant A, (2) Ant B, (4) Ant C */
#define IWM_RATE_MCS_ANT_POS 14
#define IWM_RATE_MCS_ANT_A_MSK (1 << IWM_RATE_MCS_ANT_POS)
#define IWM_RATE_MCS_ANT_B_MSK (2 << IWM_RATE_MCS_ANT_POS)
#define IWM_RATE_MCS_ANT_C_MSK (4 << IWM_RATE_MCS_ANT_POS)
#define IWM_RATE_MCS_ANT_AB_MSK (IWM_RATE_MCS_ANT_A_MSK | \
IWM_RATE_MCS_ANT_B_MSK)
#define IWM_RATE_MCS_ANT_ABC_MSK (IWM_RATE_MCS_ANT_AB_MSK | \
IWM_RATE_MCS_ANT_C_MSK)
#define IWM_RATE_MCS_ANT_MSK IWM_RATE_MCS_ANT_ABC_MSK
#define IWM_RATE_MCS_ANT_NUM 3
/* Bit 17-18: (0) SS, (1) SS*2 */
#define IWM_RATE_MCS_STBC_POS 17
#define IWM_RATE_MCS_STBC_MSK (1 << IWM_RATE_MCS_STBC_POS)
/* Bit 19: (0) Beamforming is off, (1) Beamforming is on */
#define IWM_RATE_MCS_BF_POS 19
#define IWM_RATE_MCS_BF_MSK (1 << IWM_RATE_MCS_BF_POS)
/* Bit 20: (0) ZLF is off, (1) ZLF is on */
#define IWM_RATE_MCS_ZLF_POS 20
#define IWM_RATE_MCS_ZLF_MSK (1 << IWM_RATE_MCS_ZLF_POS)
/* Bit 24-25: (0) 20MHz (no dup), (1) 2x20MHz, (2) 4x20MHz, 3 8x20MHz */
#define IWM_RATE_MCS_DUP_POS 24
#define IWM_RATE_MCS_DUP_MSK (3 << IWM_RATE_MCS_DUP_POS)
/* Bit 27: (1) LDPC enabled, (0) LDPC disabled */
#define IWM_RATE_MCS_LDPC_POS 27
#define IWM_RATE_MCS_LDPC_MSK (1 << IWM_RATE_MCS_LDPC_POS)
/* Link Quality definitions */
/* # entries in rate scale table to support Tx retries */
#define IWM_LQ_MAX_RETRY_NUM 16
/* Link quality command flags bit fields */
/* Bit 0: (0) Don't use RTS (1) Use RTS */
#define IWM_LQ_FLAG_USE_RTS_POS 0
#define IWM_LQ_FLAG_USE_RTS_MSK (1 << IWM_LQ_FLAG_USE_RTS_POS)
/* Bit 1-3: LQ command color. Used to match responses to LQ commands */
#define IWM_LQ_FLAG_COLOR_POS 1
#define IWM_LQ_FLAG_COLOR_MSK (7 << IWM_LQ_FLAG_COLOR_POS)
/* Bit 4-5: Tx RTS BW Signalling
* (0) No RTS BW signalling
* (1) Static BW signalling
* (2) Dynamic BW signalling
*/
#define IWM_LQ_FLAG_RTS_BW_SIG_POS 4
#define IWM_LQ_FLAG_RTS_BW_SIG_NONE (0 << IWM_LQ_FLAG_RTS_BW_SIG_POS)
#define IWM_LQ_FLAG_RTS_BW_SIG_STATIC (1 << IWM_LQ_FLAG_RTS_BW_SIG_POS)
#define IWM_LQ_FLAG_RTS_BW_SIG_DYNAMIC (2 << IWM_LQ_FLAG_RTS_BW_SIG_POS)
/* Bit 6: (0) No dynamic BW selection (1) Allow dynamic BW selection
* Dyanmic BW selection allows Tx with narrower BW then requested in rates
*/
#define IWM_LQ_FLAG_DYNAMIC_BW_POS 6
#define IWM_LQ_FLAG_DYNAMIC_BW_MSK (1 << IWM_LQ_FLAG_DYNAMIC_BW_POS)
/* Single Stream Tx Parameters (lq_cmd->ss_params)
* Flags to control a smart FW decision about whether BFER/STBC/SISO will be
* used for single stream Tx.
*/
/* Bit 0-1: Max STBC streams allowed. Can be 0-3.
* (0) - No STBC allowed
* (1) - 2x1 STBC allowed (HT/VHT)
* (2) - 4x2 STBC allowed (HT/VHT)
* (3) - 3x2 STBC allowed (HT only)
* All our chips are at most 2 antennas so only (1) is valid for now.
*/
#define IWM_LQ_SS_STBC_ALLOWED_POS 0
#define IWM_LQ_SS_STBC_ALLOWED_MSK (3 << IWM_LQ_SS_STBC_ALLOWED_MSK)
/* 2x1 STBC is allowed */
#define IWM_LQ_SS_STBC_1SS_ALLOWED (1 << IWM_LQ_SS_STBC_ALLOWED_POS)
/* Bit 2: Beamformer (VHT only) is allowed */
#define IWM_LQ_SS_BFER_ALLOWED_POS 2
#define IWM_LQ_SS_BFER_ALLOWED (1 << IWM_LQ_SS_BFER_ALLOWED_POS)
/* Bit 3: Force BFER or STBC for testing
* If this is set:
* If BFER is allowed then force the ucode to choose BFER else
* If STBC is allowed then force the ucode to choose STBC over SISO
*/
#define IWM_LQ_SS_FORCE_POS 3
#define IWM_LQ_SS_FORCE (1 << IWM_LQ_SS_FORCE_POS)
/* Bit 31: ss_params field is valid. Used for FW backward compatibility
* with other drivers which don't support the ss_params API yet
*/
#define IWM_LQ_SS_PARAMS_VALID_POS 31
#define IWM_LQ_SS_PARAMS_VALID (1 << IWM_LQ_SS_PARAMS_VALID_POS)
/**
* struct iwm_lq_cmd - link quality command
* @sta_id: station to update
* @control: not used
* @flags: combination of IWM_LQ_FLAG_*
* @mimo_delim: the first SISO index in rs_table, which separates MIMO
* and SISO rates
* @single_stream_ant_msk: best antenna for SISO (can be dual in CDD).
* Should be ANT_[ABC]
* @dual_stream_ant_msk: best antennas for MIMO, combination of ANT_[ABC]
* @initial_rate_index: first index from rs_table per AC category
* @agg_time_limit: aggregation max time threshold in usec/100, meaning
* value of 100 is one usec. Range is 100 to 8000
* @agg_disable_start_th: try-count threshold for starting aggregation.
* If a frame has higher try-count, it should not be selected for
* starting an aggregation sequence.
* @agg_frame_cnt_limit: max frame count in an aggregation.
* 0: no limit
* 1: no aggregation (one frame per aggregation)
* 2 - 0x3f: maximal number of frames (up to 3f == 63)
* @rs_table: array of rates for each TX try, each is rate_n_flags,
* meaning it is a combination of IWM_RATE_MCS_* and IWM_RATE_*_PLCP
* @ss_params: single stream features. declare whether STBC or BFER are allowed.
*/
struct iwm_lq_cmd {
uint8_t sta_id;
uint8_t reduced_tpc;
uint16_t control;
/* LINK_QUAL_GENERAL_PARAMS_API_S_VER_1 */
uint8_t flags;
uint8_t mimo_delim;
uint8_t single_stream_ant_msk;
uint8_t dual_stream_ant_msk;
uint8_t initial_rate_index[IWM_AC_NUM];
/* LINK_QUAL_AGG_PARAMS_API_S_VER_1 */
uint16_t agg_time_limit;
uint8_t agg_disable_start_th;
uint8_t agg_frame_cnt_limit;
uint32_t reserved2;
uint32_t rs_table[IWM_LQ_MAX_RETRY_NUM];
uint32_t ss_params;
}; /* LINK_QUALITY_CMD_API_S_VER_1 */
/*
* END mvm/fw-api-rs.h
*/
/*
* BEGIN mvm/fw-api-tx.h
*/
/**
* enum iwm_tx_flags - bitmasks for tx_flags in TX command
* @IWM_TX_CMD_FLG_PROT_REQUIRE: use RTS or CTS-to-self to protect the frame
* @IWM_TX_CMD_FLG_ACK: expect ACK from receiving station
* @IWM_TX_CMD_FLG_STA_RATE: use RS table with initial index from the TX command.
* Otherwise, use rate_n_flags from the TX command
* @IWM_TX_CMD_FLG_BA: this frame is a block ack
* @IWM_TX_CMD_FLG_BAR: this frame is a BA request, immediate BAR is expected
* Must set IWM_TX_CMD_FLG_ACK with this flag.
* @IWM_TX_CMD_FLG_TXOP_PROT: protect frame with full TXOP protection
* @IWM_TX_CMD_FLG_VHT_NDPA: mark frame is NDPA for VHT beamformer sequence
* @IWM_TX_CMD_FLG_HT_NDPA: mark frame is NDPA for HT beamformer sequence
* @IWM_TX_CMD_FLG_CSI_FDBK2HOST: mark to send feedback to host (only if good CRC)
* @IWM_TX_CMD_FLG_BT_DIS: disable BT priority for this frame
* @IWM_TX_CMD_FLG_SEQ_CTL: set if FW should override the sequence control.
* Should be set for mgmt, non-QOS data, mcast, bcast and in scan command
* @IWM_TX_CMD_FLG_MORE_FRAG: this frame is non-last MPDU
* @IWM_TX_CMD_FLG_NEXT_FRAME: this frame includes information of the next frame
* @IWM_TX_CMD_FLG_TSF: FW should calculate and insert TSF in the frame
* Should be set for beacons and probe responses
* @IWM_TX_CMD_FLG_CALIB: activate PA TX power calibrations
* @IWM_TX_CMD_FLG_KEEP_SEQ_CTL: if seq_ctl is set, don't increase inner seq count
* @IWM_TX_CMD_FLG_AGG_START: allow this frame to start aggregation
* @IWM_TX_CMD_FLG_MH_PAD: driver inserted 2 byte padding after MAC header.
* Should be set for 26/30 length MAC headers
* @IWM_TX_CMD_FLG_RESP_TO_DRV: zero this if the response should go only to FW
* @IWM_TX_CMD_FLG_TKIP_MIC_DONE: FW already performed TKIP MIC calculation
* @IWM_TX_CMD_FLG_DUR: disable duration overwriting used in PS-Poll Assoc-id
* @IWM_TX_CMD_FLG_FW_DROP: FW should mark frame to be dropped
* @IWM_TX_CMD_FLG_EXEC_PAPD: execute PAPD
* @IWM_TX_CMD_FLG_PAPD_TYPE: 0 for reference power, 1 for nominal power
* @IWM_TX_CMD_FLG_HCCA_CHUNK: mark start of TSPEC chunk
*/
enum iwm_tx_flags {
IWM_TX_CMD_FLG_PROT_REQUIRE = (1 << 0),
IWM_TX_CMD_FLG_ACK = (1 << 3),
IWM_TX_CMD_FLG_STA_RATE = (1 << 4),
IWM_TX_CMD_FLG_BA = (1 << 5),
IWM_TX_CMD_FLG_BAR = (1 << 6),
IWM_TX_CMD_FLG_TXOP_PROT = (1 << 7),
IWM_TX_CMD_FLG_VHT_NDPA = (1 << 8),
IWM_TX_CMD_FLG_HT_NDPA = (1 << 9),
IWM_TX_CMD_FLG_CSI_FDBK2HOST = (1 << 10),
IWM_TX_CMD_FLG_BT_DIS = (1 << 12),
IWM_TX_CMD_FLG_SEQ_CTL = (1 << 13),
IWM_TX_CMD_FLG_MORE_FRAG = (1 << 14),
IWM_TX_CMD_FLG_NEXT_FRAME = (1 << 15),
IWM_TX_CMD_FLG_TSF = (1 << 16),
IWM_TX_CMD_FLG_CALIB = (1 << 17),
IWM_TX_CMD_FLG_KEEP_SEQ_CTL = (1 << 18),
IWM_TX_CMD_FLG_AGG_START = (1 << 19),
IWM_TX_CMD_FLG_MH_PAD = (1 << 20),
IWM_TX_CMD_FLG_RESP_TO_DRV = (1 << 21),
IWM_TX_CMD_FLG_TKIP_MIC_DONE = (1 << 23),
IWM_TX_CMD_FLG_DUR = (1 << 25),
IWM_TX_CMD_FLG_FW_DROP = (1 << 26),
IWM_TX_CMD_FLG_EXEC_PAPD = (1 << 27),
IWM_TX_CMD_FLG_PAPD_TYPE = (1 << 28),
IWM_TX_CMD_FLG_HCCA_CHUNK = (1 << 31)
}; /* IWM_TX_FLAGS_BITS_API_S_VER_1 */
/**
* enum iwm_tx_pm_timeouts - pm timeout values in TX command
* @IWM_PM_FRAME_NONE: no need to suspend sleep mode
* @IWM_PM_FRAME_MGMT: fw suspend sleep mode for 100TU
* @IWM_PM_FRAME_ASSOC: fw suspend sleep mode for 10sec
*/
enum iwm_tx_pm_timeouts {
IWM_PM_FRAME_NONE = 0,
IWM_PM_FRAME_MGMT = 2,
IWM_PM_FRAME_ASSOC = 3,
};
/*
* TX command security control
*/
#define IWM_TX_CMD_SEC_WEP 0x01
#define IWM_TX_CMD_SEC_CCM 0x02
#define IWM_TX_CMD_SEC_TKIP 0x03
#define IWM_TX_CMD_SEC_EXT 0x04
#define IWM_TX_CMD_SEC_MSK 0x07
#define IWM_TX_CMD_SEC_WEP_KEY_IDX_POS 6
#define IWM_TX_CMD_SEC_WEP_KEY_IDX_MSK 0xc0
#define IWM_TX_CMD_SEC_KEY128 0x08
/*
* TX command Frame life time in us - to be written in pm_frame_timeout
*/
#define IWM_TX_CMD_LIFE_TIME_INFINITE 0xFFFFFFFF
#define IWM_TX_CMD_LIFE_TIME_DEFAULT 2000000 /* 2000 ms*/
#define IWM_TX_CMD_LIFE_TIME_PROBE_RESP 40000 /* 40 ms */
#define IWM_TX_CMD_LIFE_TIME_EXPIRED_FRAME 0
/*
* TID for non QoS frames - to be written in tid_tspec
*/
#define IWM_TID_NON_QOS IWM_MAX_TID_COUNT
/*
* Limits on the retransmissions - to be written in {data,rts}_retry_limit
*/
#define IWM_DEFAULT_TX_RETRY 15
#define IWM_MGMT_DFAULT_RETRY_LIMIT 3
#define IWM_RTS_DFAULT_RETRY_LIMIT 60
#define IWM_BAR_DFAULT_RETRY_LIMIT 60
#define IWM_LOW_RETRY_LIMIT 7
/* TODO: complete documentation for try_cnt and btkill_cnt */
/**
* struct iwm_tx_cmd - TX command struct to FW
* ( IWM_TX_CMD = 0x1c )
* @len: in bytes of the payload, see below for details
* @next_frame_len: same as len, but for next frame (0 if not applicable)
* Used for fragmentation and bursting, but not in 11n aggregation.
* @tx_flags: combination of IWM_TX_CMD_FLG_*
* @rate_n_flags: rate for *all* Tx attempts, if IWM_TX_CMD_FLG_STA_RATE_MSK is
* cleared. Combination of IWM_RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @sec_ctl: security control, IWM_TX_CMD_SEC_*
* @initial_rate_index: index into the rate table for initial TX attempt.
* Applied if IWM_TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames.
* @key: security key
* @reserved3: reserved
* @life_time: frame life time (usecs??)
* @dram_lsb_ptr: Physical address of scratch area in the command (try_cnt +
* btkill_cnd + reserved), first 32 bits. "0" disables usage.
* @dram_msb_ptr: upper bits of the scratch physical address
* @rts_retry_limit: max attempts for RTS
* @data_retry_limit: max attempts to send the data packet
* @tid_spec: TID/tspec
* @pm_frame_timeout: PM TX frame timeout
* @driver_txop: duration od EDCA TXOP, in 32-usec units. Set this if not
* specified by HCCA protocol
*
* The byte count (both len and next_frame_len) includes MAC header
* (24/26/30/32 bytes)
* + 2 bytes pad if 26/30 header size
* + 8 byte IV for CCM or TKIP (not used for WEP)
* + Data payload
* + 8-byte MIC (not used for CCM/WEP)
* It does not include post-MAC padding, i.e.,
* MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.
* Range of len: 14-2342 bytes.
*
* After the struct fields the MAC header is placed, plus any padding,
* and then the actial payload.
*/
struct iwm_tx_cmd {
uint16_t len;
uint16_t next_frame_len;
uint32_t tx_flags;
struct {
uint8_t try_cnt;
uint8_t btkill_cnt;
uint16_t reserved;
} scratch; /* DRAM_SCRATCH_API_U_VER_1 */
uint32_t rate_n_flags;
uint8_t sta_id;
uint8_t sec_ctl;
uint8_t initial_rate_index;
uint8_t reserved2;
uint8_t key[16];
uint16_t next_frame_flags;
uint16_t reserved3;
uint32_t life_time;
uint32_t dram_lsb_ptr;
uint8_t dram_msb_ptr;
uint8_t rts_retry_limit;
uint8_t data_retry_limit;
uint8_t tid_tspec;
uint16_t pm_frame_timeout;
uint16_t driver_txop;
uint8_t payload[0];
struct ieee80211_frame hdr[0];
} __packed; /* IWM_TX_CMD_API_S_VER_3 */
/*
* TX response related data
*/
/*
* enum iwm_tx_status - status that is returned by the fw after attempts to Tx
* @IWM_TX_STATUS_SUCCESS:
* @IWM_TX_STATUS_DIRECT_DONE:
* @IWM_TX_STATUS_POSTPONE_DELAY:
* @IWM_TX_STATUS_POSTPONE_FEW_BYTES:
* @IWM_TX_STATUS_POSTPONE_BT_PRIO:
* @IWM_TX_STATUS_POSTPONE_QUIET_PERIOD:
* @IWM_TX_STATUS_POSTPONE_CALC_TTAK:
* @IWM_TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY:
* @IWM_TX_STATUS_FAIL_SHORT_LIMIT:
* @IWM_TX_STATUS_FAIL_LONG_LIMIT:
* @IWM_TX_STATUS_FAIL_UNDERRUN:
* @IWM_TX_STATUS_FAIL_DRAIN_FLOW:
* @IWM_TX_STATUS_FAIL_RFKILL_FLUSH:
* @IWM_TX_STATUS_FAIL_LIFE_EXPIRE:
* @IWM_TX_STATUS_FAIL_DEST_PS:
* @IWM_TX_STATUS_FAIL_HOST_ABORTED:
* @IWM_TX_STATUS_FAIL_BT_RETRY:
* @IWM_TX_STATUS_FAIL_STA_INVALID:
* @IWM_TX_TATUS_FAIL_FRAG_DROPPED:
* @IWM_TX_STATUS_FAIL_TID_DISABLE:
* @IWM_TX_STATUS_FAIL_FIFO_FLUSHED:
* @IWM_TX_STATUS_FAIL_SMALL_CF_POLL:
* @IWM_TX_STATUS_FAIL_FW_DROP:
* @IWM_TX_STATUS_FAIL_STA_COLOR_MISMATCH: mismatch between color of Tx cmd and
* STA table
* @IWM_TX_FRAME_STATUS_INTERNAL_ABORT:
* @IWM_TX_MODE_MSK:
* @IWM_TX_MODE_NO_BURST:
* @IWM_TX_MODE_IN_BURST_SEQ:
* @IWM_TX_MODE_FIRST_IN_BURST:
* @IWM_TX_QUEUE_NUM_MSK:
*
* Valid only if frame_count =1
* TODO: complete documentation
*/
enum iwm_tx_status {
IWM_TX_STATUS_MSK = 0x000000ff,
IWM_TX_STATUS_SUCCESS = 0x01,
IWM_TX_STATUS_DIRECT_DONE = 0x02,
/* postpone TX */
IWM_TX_STATUS_POSTPONE_DELAY = 0x40,
IWM_TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
IWM_TX_STATUS_POSTPONE_BT_PRIO = 0x42,
IWM_TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
IWM_TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
/* abort TX */
IWM_TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
IWM_TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
IWM_TX_STATUS_FAIL_LONG_LIMIT = 0x83,
IWM_TX_STATUS_FAIL_UNDERRUN = 0x84,
IWM_TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
IWM_TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
IWM_TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
IWM_TX_STATUS_FAIL_DEST_PS = 0x88,
IWM_TX_STATUS_FAIL_HOST_ABORTED = 0x89,
IWM_TX_STATUS_FAIL_BT_RETRY = 0x8a,
IWM_TX_STATUS_FAIL_STA_INVALID = 0x8b,
IWM_TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
IWM_TX_STATUS_FAIL_TID_DISABLE = 0x8d,
IWM_TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
IWM_TX_STATUS_FAIL_SMALL_CF_POLL = 0x8f,
IWM_TX_STATUS_FAIL_FW_DROP = 0x90,
IWM_TX_STATUS_FAIL_STA_COLOR_MISMATCH = 0x91,
IWM_TX_STATUS_INTERNAL_ABORT = 0x92,
IWM_TX_MODE_MSK = 0x00000f00,
IWM_TX_MODE_NO_BURST = 0x00000000,
IWM_TX_MODE_IN_BURST_SEQ = 0x00000100,
IWM_TX_MODE_FIRST_IN_BURST = 0x00000200,
IWM_TX_QUEUE_NUM_MSK = 0x0001f000,
IWM_TX_NARROW_BW_MSK = 0x00060000,
IWM_TX_NARROW_BW_1DIV2 = 0x00020000,
IWM_TX_NARROW_BW_1DIV4 = 0x00040000,
IWM_TX_NARROW_BW_1DIV8 = 0x00060000,
};
/*
* enum iwm_tx_agg_status - TX aggregation status
* @IWM_AGG_TX_STATE_STATUS_MSK:
* @IWM_AGG_TX_STATE_TRANSMITTED:
* @IWM_AGG_TX_STATE_UNDERRUN:
* @IWM_AGG_TX_STATE_BT_PRIO:
* @IWM_AGG_TX_STATE_FEW_BYTES:
* @IWM_AGG_TX_STATE_ABORT:
* @IWM_AGG_TX_STATE_LAST_SENT_TTL:
* @IWM_AGG_TX_STATE_LAST_SENT_TRY_CNT:
* @IWM_AGG_TX_STATE_LAST_SENT_BT_KILL:
* @IWM_AGG_TX_STATE_SCD_QUERY:
* @IWM_AGG_TX_STATE_TEST_BAD_CRC32:
* @IWM_AGG_TX_STATE_RESPONSE:
* @IWM_AGG_TX_STATE_DUMP_TX:
* @IWM_AGG_TX_STATE_DELAY_TX:
* @IWM_AGG_TX_STATE_TRY_CNT_MSK: Retry count for 1st frame in aggregation (retries
* occur if tx failed for this frame when it was a member of a previous
* aggregation block). If rate scaling is used, retry count indicates the
* rate table entry used for all frames in the new agg.
*@ IWM_AGG_TX_STATE_SEQ_NUM_MSK: Command ID and sequence number of Tx command for
* this frame
*
* TODO: complete documentation
*/
enum iwm_tx_agg_status {
IWM_AGG_TX_STATE_STATUS_MSK = 0x00fff,
IWM_AGG_TX_STATE_TRANSMITTED = 0x000,
IWM_AGG_TX_STATE_UNDERRUN = 0x001,
IWM_AGG_TX_STATE_BT_PRIO = 0x002,
IWM_AGG_TX_STATE_FEW_BYTES = 0x004,
IWM_AGG_TX_STATE_ABORT = 0x008,
IWM_AGG_TX_STATE_LAST_SENT_TTL = 0x010,
IWM_AGG_TX_STATE_LAST_SENT_TRY_CNT = 0x020,
IWM_AGG_TX_STATE_LAST_SENT_BT_KILL = 0x040,
IWM_AGG_TX_STATE_SCD_QUERY = 0x080,
IWM_AGG_TX_STATE_TEST_BAD_CRC32 = 0x0100,
IWM_AGG_TX_STATE_RESPONSE = 0x1ff,
IWM_AGG_TX_STATE_DUMP_TX = 0x200,
IWM_AGG_TX_STATE_DELAY_TX = 0x400,
IWM_AGG_TX_STATE_TRY_CNT_POS = 12,
IWM_AGG_TX_STATE_TRY_CNT_MSK = 0xf << IWM_AGG_TX_STATE_TRY_CNT_POS,
};
#define IWM_AGG_TX_STATE_LAST_SENT_MSK (IWM_AGG_TX_STATE_LAST_SENT_TTL| \
IWM_AGG_TX_STATE_LAST_SENT_TRY_CNT| \
IWM_AGG_TX_STATE_LAST_SENT_BT_KILL)
/*
* The mask below describes a status where we are absolutely sure that the MPDU
* wasn't sent. For BA/Underrun we cannot be that sure. All we know that we've
* written the bytes to the TXE, but we know nothing about what the DSP did.
*/
#define IWM_AGG_TX_STAT_FRAME_NOT_SENT (IWM_AGG_TX_STATE_FEW_BYTES | \
IWM_AGG_TX_STATE_ABORT | \
IWM_AGG_TX_STATE_SCD_QUERY)
/*
* IWM_REPLY_TX = 0x1c (response)
*
* This response may be in one of two slightly different formats, indicated
* by the frame_count field:
*
* 1) No aggregation (frame_count == 1). This reports Tx results for a single
* frame. Multiple attempts, at various bit rates, may have been made for
* this frame.
*
* 2) Aggregation (frame_count > 1). This reports Tx results for two or more
* frames that used block-acknowledge. All frames were transmitted at
* same rate. Rate scaling may have been used if first frame in this new
* agg block failed in previous agg block(s).
*
* Note that, for aggregation, ACK (block-ack) status is not delivered
* here; block-ack has not been received by the time the device records
* this status.
* This status relates to reasons the tx might have been blocked or aborted
* within the device, rather than whether it was received successfully by
* the destination station.
*/
/**
* struct iwm_agg_tx_status - per packet TX aggregation status
* @status: enum iwm_tx_agg_status
* @sequence: Sequence # for this frame's Tx cmd (not SSN!)
*/
struct iwm_agg_tx_status {
uint16_t status;
uint16_t sequence;
} __packed;
/*
* definitions for initial rate index field
* bits [3:0] initial rate index
* bits [6:4] rate table color, used for the initial rate
* bit-7 invalid rate indication
*/
#define IWM_TX_RES_INIT_RATE_INDEX_MSK 0x0f
#define IWM_TX_RES_RATE_TABLE_COLOR_MSK 0x70
#define IWM_TX_RES_INV_RATE_INDEX_MSK 0x80
#define IWM_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f)
#define IWM_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4)
/**
* struct iwm_mvm_tx_resp - notifies that fw is TXing a packet
* ( IWM_REPLY_TX = 0x1c )
* @frame_count: 1 no aggregation, >1 aggregation
* @bt_kill_count: num of times blocked by bluetooth (unused for agg)
* @failure_rts: num of failures due to unsuccessful RTS
* @failure_frame: num failures due to no ACK (unused for agg)
* @initial_rate: for non-agg: rate of the successful Tx. For agg: rate of the
* Tx of all the batch. IWM_RATE_MCS_*
* @wireless_media_time: for non-agg: RTS + CTS + frame tx attempts time + ACK.
* for agg: RTS + CTS + aggregation tx time + block-ack time.
* in usec.
* @pa_status: tx power info
* @pa_integ_res_a: tx power info
* @pa_integ_res_b: tx power info
* @pa_integ_res_c: tx power info
* @measurement_req_id: tx power info
* @tfd_info: TFD information set by the FH
* @seq_ctl: sequence control from the Tx cmd
* @byte_cnt: byte count from the Tx cmd
* @tlc_info: TLC rate info
* @ra_tid: bits [3:0] = ra, bits [7:4] = tid
* @frame_ctrl: frame control
* @status: for non-agg: frame status IWM_TX_STATUS_*
* for agg: status of 1st frame, IWM_AGG_TX_STATE_*; other frame status fields
* follow this one, up to frame_count.
*
* After the array of statuses comes the SSN of the SCD. Look at
* %iwm_mvm_get_scd_ssn for more details.
*/
struct iwm_mvm_tx_resp {
uint8_t frame_count;
uint8_t bt_kill_count;
uint8_t failure_rts;
uint8_t failure_frame;
uint32_t initial_rate;
uint16_t wireless_media_time;
uint8_t pa_status;
uint8_t pa_integ_res_a[3];
uint8_t pa_integ_res_b[3];
uint8_t pa_integ_res_c[3];
uint16_t measurement_req_id;
uint8_t reduced_tpc;
uint8_t reserved;
uint32_t tfd_info;
uint16_t seq_ctl;
uint16_t byte_cnt;
uint8_t tlc_info;
uint8_t ra_tid;
uint16_t frame_ctrl;
struct iwm_agg_tx_status status;
} __packed; /* IWM_TX_RSP_API_S_VER_3 */
/**
* struct iwm_mvm_ba_notif - notifies about reception of BA
* ( IWM_BA_NOTIF = 0xc5 )
* @sta_addr_lo32: lower 32 bits of the MAC address
* @sta_addr_hi16: upper 16 bits of the MAC address
* @sta_id: Index of recipient (BA-sending) station in fw's station table
* @tid: tid of the session
* @seq_ctl:
* @bitmap: the bitmap of the BA notification as seen in the air
* @scd_flow: the tx queue this BA relates to
* @scd_ssn: the index of the last contiguously sent packet
* @txed: number of Txed frames in this batch
* @txed_2_done: number of Acked frames in this batch
*/
struct iwm_mvm_ba_notif {
uint32_t sta_addr_lo32;
uint16_t sta_addr_hi16;
uint16_t reserved;
uint8_t sta_id;
uint8_t tid;
uint16_t seq_ctl;
uint64_t bitmap;
uint16_t scd_flow;
uint16_t scd_ssn;
uint8_t txed;
uint8_t txed_2_done;
uint16_t reserved1;
} __packed;
/*
* struct iwm_mac_beacon_cmd - beacon template command
* @tx: the tx commands associated with the beacon frame
* @template_id: currently equal to the mac context id of the coresponding
* mac.
* @tim_idx: the offset of the tim IE in the beacon
* @tim_size: the length of the tim IE
* @frame: the template of the beacon frame
*/
struct iwm_mac_beacon_cmd {
struct iwm_tx_cmd tx;
uint32_t template_id;
uint32_t tim_idx;
uint32_t tim_size;
struct ieee80211_frame frame[0];
} __packed;
struct iwm_beacon_notif {
struct iwm_mvm_tx_resp beacon_notify_hdr;
uint64_t tsf;
uint32_t ibss_mgr_status;
} __packed;
/**
* enum iwm_dump_control - dump (flush) control flags
* @IWM_DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty
* and the TFD queues are empty.
*/
enum iwm_dump_control {
IWM_DUMP_TX_FIFO_FLUSH = (1 << 1),
};
/**
* struct iwm_tx_path_flush_cmd -- queue/FIFO flush command
* @queues_ctl: bitmap of queues to flush
* @flush_ctl: control flags
* @reserved: reserved
*/
struct iwm_tx_path_flush_cmd {
uint32_t queues_ctl;
uint16_t flush_ctl;
uint16_t reserved;
} __packed; /* IWM_TX_PATH_FLUSH_CMD_API_S_VER_1 */
/**
* iwm_mvm_get_scd_ssn - returns the SSN of the SCD
* @tx_resp: the Tx response from the fw (agg or non-agg)
*
* When the fw sends an AMPDU, it fetches the MPDUs one after the other. Since
* it can't know that everything will go well until the end of the AMPDU, it
* can't know in advance the number of MPDUs that will be sent in the current
* batch. This is why it writes the agg Tx response while it fetches the MPDUs.
* Hence, it can't know in advance what the SSN of the SCD will be at the end
* of the batch. This is why the SSN of the SCD is written at the end of the
* whole struct at a variable offset. This function knows how to cope with the
* variable offset and returns the SSN of the SCD.
*/
static inline uint32_t iwm_mvm_get_scd_ssn(struct iwm_mvm_tx_resp *tx_resp)
{
return le32_to_cpup((uint32_t *)&tx_resp->status +
tx_resp->frame_count) & 0xfff;
}
/*
* END mvm/fw-api-tx.h
*/
/*
* BEGIN mvm/fw-api-scan.h
*/
/**
* struct iwm_scd_txq_cfg_cmd - New txq hw scheduler config command
* @token:
* @sta_id: station id
* @tid:
* @scd_queue: scheduler queue to confiug
* @enable: 1 queue enable, 0 queue disable
* @aggregate: 1 aggregated queue, 0 otherwise
* @tx_fifo: %enum iwm_mvm_tx_fifo
* @window: BA window size
* @ssn: SSN for the BA agreement
*/
struct iwm_scd_txq_cfg_cmd {
uint8_t token;
uint8_t sta_id;
uint8_t tid;
uint8_t scd_queue;
uint8_t enable;
uint8_t aggregate;
uint8_t tx_fifo;
uint8_t window;
uint16_t ssn;
uint16_t reserved;
} __packed; /* SCD_QUEUE_CFG_CMD_API_S_VER_1 */
/**
* struct iwm_scd_txq_cfg_rsp
* @token: taken from the command
* @sta_id: station id from the command
* @tid: tid from the command
* @scd_queue: scd_queue from the command
*/
struct iwm_scd_txq_cfg_rsp {
uint8_t token;
uint8_t sta_id;
uint8_t tid;
uint8_t scd_queue;
} __packed; /* SCD_QUEUE_CFG_RSP_API_S_VER_1 */
/* Scan Commands, Responses, Notifications */
/* Masks for iwm_scan_channel.type flags */
#define IWM_SCAN_CHANNEL_TYPE_ACTIVE (1 << 0)
#define IWM_SCAN_CHANNEL_NSSIDS(x) (((1 << (x)) - 1) << 1)
/* Max number of IEs for direct SSID scans in a command */
#define IWM_PROBE_OPTION_MAX 20
/**
* struct iwm_ssid_ie - directed scan network information element
*
* Up to 20 of these may appear in IWM_REPLY_SCAN_CMD,
* selected by "type" bit field in struct iwm_scan_channel;
* each channel may select different ssids from among the 20 entries.
* SSID IEs get transmitted in reverse order of entry.
*/
struct iwm_ssid_ie {
uint8_t id;
uint8_t len;
uint8_t ssid[IEEE80211_NWID_LEN];
} __packed; /* IWM_SCAN_DIRECT_SSID_IE_API_S_VER_1 */
/* scan offload */
#define IWM_SCAN_MAX_BLACKLIST_LEN 64
#define IWM_SCAN_SHORT_BLACKLIST_LEN 16
#define IWM_SCAN_MAX_PROFILES 11
#define IWM_SCAN_OFFLOAD_PROBE_REQ_SIZE 512
/* Default watchdog (in MS) for scheduled scan iteration */
#define IWM_SCHED_SCAN_WATCHDOG cpu_to_le16(15000)
#define IWM_GOOD_CRC_TH_DEFAULT cpu_to_le16(1)
#define IWM_CAN_ABORT_STATUS 1
#define IWM_FULL_SCAN_MULTIPLIER 5
#define IWM_FAST_SCHED_SCAN_ITERATIONS 3
#define IWM_MAX_SCHED_SCAN_PLANS 2
/**
* iwm_scan_schedule_lmac - schedule of scan offload
* @delay: delay between iterations, in seconds.
* @iterations: num of scan iterations
* @full_scan_mul: number of partial scans before each full scan
*/
struct iwm_scan_schedule_lmac {
uint16_t delay;
uint8_t iterations;
uint8_t full_scan_mul;
} __packed; /* SCAN_SCHEDULE_API_S */
/**
* iwm_scan_req_tx_cmd - SCAN_REQ_TX_CMD_API_S
* @tx_flags: combination of TX_CMD_FLG_*
* @rate_n_flags: rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is
* cleared. Combination of RATE_MCS_*
* @sta_id: index of destination station in FW station table
* @reserved: for alignment and future use
*/
struct iwm_scan_req_tx_cmd {
uint32_t tx_flags;
uint32_t rate_n_flags;
uint8_t sta_id;
uint8_t reserved[3];
} __packed;
enum iwm_scan_channel_flags_lmac {
IWM_UNIFIED_SCAN_CHANNEL_FULL = (1 << 27),
IWM_UNIFIED_SCAN_CHANNEL_PARTIAL = (1 << 28),
};
/**
* iwm_scan_channel_cfg_lmac - SCAN_CHANNEL_CFG_S_VER2
* @flags: bits 1-20: directed scan to i'th ssid
* other bits &enum iwm_scan_channel_flags_lmac
* @channel_number: channel number 1-13 etc
* @iter_count: scan iteration on this channel
* @iter_interval: interval in seconds between iterations on one channel
*/
struct iwm_scan_channel_cfg_lmac {
uint32_t flags;
uint16_t channel_num;
uint16_t iter_count;
uint32_t iter_interval;
} __packed;
/*
* iwm_scan_probe_segment - PROBE_SEGMENT_API_S_VER_1
* @offset: offset in the data block
* @len: length of the segment
*/
struct iwm_scan_probe_segment {
uint16_t offset;
uint16_t len;
} __packed;
/* iwm_scan_probe_req - PROBE_REQUEST_FRAME_API_S_VER_2
* @mac_header: first (and common) part of the probe
* @band_data: band specific data
* @common_data: last (and common) part of the probe
* @buf: raw data block
*/
struct iwm_scan_probe_req {
struct iwm_scan_probe_segment mac_header;
struct iwm_scan_probe_segment band_data[2];
struct iwm_scan_probe_segment common_data;
uint8_t buf[IWM_SCAN_OFFLOAD_PROBE_REQ_SIZE];
} __packed;
enum iwm_scan_channel_flags {
IWM_SCAN_CHANNEL_FLAG_EBS = (1 << 0),
IWM_SCAN_CHANNEL_FLAG_EBS_ACCURATE = (1 << 1),
IWM_SCAN_CHANNEL_FLAG_CACHE_ADD = (1 << 2),
};
/* iwm_scan_channel_opt - CHANNEL_OPTIMIZATION_API_S
* @flags: enum iwm_scan_channel_flags
* @non_ebs_ratio: defines the ratio of number of scan iterations where EBS is
* involved.
* 1 - EBS is disabled.
* 2 - every second scan will be full scan(and so on).
*/
struct iwm_scan_channel_opt {
uint16_t flags;
uint16_t non_ebs_ratio;
} __packed;
/**
* iwm_mvm_lmac_scan_flags
* @IWM_MVM_LMAC_SCAN_FLAG_PASS_ALL: pass all beacons and probe responses
* without filtering.
* @IWM_MVM_LMAC_SCAN_FLAG_PASSIVE: force passive scan on all channels
* @IWM_MVM_LMAC_SCAN_FLAG_PRE_CONNECTION: single channel scan
* @IWM_MVM_LMAC_SCAN_FLAG_ITER_COMPLETE: send iteration complete notification
* @IWM_MVM_LMAC_SCAN_FLAG_MULTIPLE_SSIDS multiple SSID matching
* @IWM_MVM_LMAC_SCAN_FLAG_FRAGMENTED: all passive scans will be fragmented
* @IWM_MVM_LMAC_SCAN_FLAGS_RRM_ENABLED: insert WFA vendor-specific TPC report
* and DS parameter set IEs into probe requests.
* @IWM_MVM_LMAC_SCAN_FLAG_EXTENDED_DWELL: use extended dwell time on channels
* 1, 6 and 11.
* @IWM_MVM_LMAC_SCAN_FLAG_MATCH: Send match found notification on matches
*/
enum iwm_mvm_lmac_scan_flags {
IWM_MVM_LMAC_SCAN_FLAG_PASS_ALL = (1 << 0),
IWM_MVM_LMAC_SCAN_FLAG_PASSIVE = (1 << 1),
IWM_MVM_LMAC_SCAN_FLAG_PRE_CONNECTION = (1 << 2),
IWM_MVM_LMAC_SCAN_FLAG_ITER_COMPLETE = (1 << 3),
IWM_MVM_LMAC_SCAN_FLAG_MULTIPLE_SSIDS = (1 << 4),
IWM_MVM_LMAC_SCAN_FLAG_FRAGMENTED = (1 << 5),
IWM_MVM_LMAC_SCAN_FLAGS_RRM_ENABLED = (1 << 6),
IWM_MVM_LMAC_SCAN_FLAG_EXTENDED_DWELL = (1 << 7),
IWM_MVM_LMAC_SCAN_FLAG_MATCH = (1 << 9),
};
enum iwm_scan_priority {
IWM_SCAN_PRIORITY_LOW,
IWM_SCAN_PRIORITY_MEDIUM,
IWM_SCAN_PRIORITY_HIGH,
};
/**
* iwm_scan_req_lmac - SCAN_REQUEST_CMD_API_S_VER_1
* @reserved1: for alignment and future use
* @channel_num: num of channels to scan
* @active-dwell: dwell time for active channels
* @passive-dwell: dwell time for passive channels
* @fragmented-dwell: dwell time for fragmented passive scan
* @extended_dwell: dwell time for channels 1, 6 and 11 (in certain cases)
* @reserved2: for alignment and future use
* @rx_chain_selct: PHY_RX_CHAIN_* flags
* @scan_flags: &enum iwm_mvm_lmac_scan_flags
* @max_out_time: max time (in TU) to be out of associated channel
* @suspend_time: pause scan this long (TUs) when returning to service channel
* @flags: RXON flags
* @filter_flags: RXON filter
* @tx_cmd: tx command for active scan; for 2GHz and for 5GHz
* @direct_scan: list of SSIDs for directed active scan
* @scan_prio: enum iwm_scan_priority
* @iter_num: number of scan iterations
* @delay: delay in seconds before first iteration
* @schedule: two scheduling plans. The first one is finite, the second one can
* be infinite.
* @channel_opt: channel optimization options, for full and partial scan
* @data: channel configuration and probe request packet.
*/
struct iwm_scan_req_lmac {
/* SCAN_REQUEST_FIXED_PART_API_S_VER_7 */
uint32_t reserved1;
uint8_t n_channels;
uint8_t active_dwell;
uint8_t passive_dwell;
uint8_t fragmented_dwell;
uint8_t extended_dwell;
uint8_t reserved2;
uint16_t rx_chain_select;
uint32_t scan_flags;
uint32_t max_out_time;
uint32_t suspend_time;
/* RX_ON_FLAGS_API_S_VER_1 */
uint32_t flags;
uint32_t filter_flags;
struct iwm_scan_req_tx_cmd tx_cmd[2];
struct iwm_ssid_ie direct_scan[IWM_PROBE_OPTION_MAX];
uint32_t scan_prio;
/* SCAN_REQ_PERIODIC_PARAMS_API_S */
uint32_t iter_num;
uint32_t delay;
struct iwm_scan_schedule_lmac schedule[IWM_MAX_SCHED_SCAN_PLANS];
struct iwm_scan_channel_opt channel_opt[2];
uint8_t data[];
} __packed;
/**
* iwm_scan_offload_complete - PERIODIC_SCAN_COMPLETE_NTF_API_S_VER_2
* @last_schedule_line: last schedule line executed (fast or regular)
* @last_schedule_iteration: last scan iteration executed before scan abort
* @status: enum iwm_scan_offload_complete_status
* @ebs_status: EBS success status &enum iwm_scan_ebs_status
* @time_after_last_iter; time in seconds elapsed after last iteration
*/
struct iwm_periodic_scan_complete {
uint8_t last_schedule_line;
uint8_t last_schedule_iteration;
uint8_t status;
uint8_t ebs_status;
uint32_t time_after_last_iter;
uint32_t reserved;
} __packed;
/**
* struct iwm_scan_results_notif - scan results for one channel -
* SCAN_RESULT_NTF_API_S_VER_3
* @channel: which channel the results are from
* @band: 0 for 5.2 GHz, 1 for 2.4 GHz
* @probe_status: IWM_SCAN_PROBE_STATUS_*, indicates success of probe request
* @num_probe_not_sent: # of request that weren't sent due to not enough time
* @duration: duration spent in channel, in usecs
*/
struct iwm_scan_results_notif {
uint8_t channel;
uint8_t band;
uint8_t probe_status;
uint8_t num_probe_not_sent;
uint32_t duration;
} __packed;
enum iwm_scan_framework_client {
IWM_SCAN_CLIENT_SCHED_SCAN = (1 << 0),
IWM_SCAN_CLIENT_NETDETECT = (1 << 1),
IWM_SCAN_CLIENT_ASSET_TRACKING = (1 << 2),
};
/**
* iwm_scan_offload_blacklist - IWM_SCAN_OFFLOAD_BLACKLIST_S
* @ssid: MAC address to filter out
* @reported_rssi: AP rssi reported to the host
* @client_bitmap: clients ignore this entry - enum scan_framework_client
*/
struct iwm_scan_offload_blacklist {
uint8_t ssid[IEEE80211_ADDR_LEN];
uint8_t reported_rssi;
uint8_t client_bitmap;
} __packed;
enum iwm_scan_offload_network_type {
IWM_NETWORK_TYPE_BSS = 1,
IWM_NETWORK_TYPE_IBSS = 2,
IWM_NETWORK_TYPE_ANY = 3,
};
enum iwm_scan_offload_band_selection {
IWM_SCAN_OFFLOAD_SELECT_2_4 = 0x4,
IWM_SCAN_OFFLOAD_SELECT_5_2 = 0x8,
IWM_SCAN_OFFLOAD_SELECT_ANY = 0xc,
};
/**
* iwm_scan_offload_profile - IWM_SCAN_OFFLOAD_PROFILE_S
* @ssid_index: index to ssid list in fixed part
* @unicast_cipher: encryption olgorithm to match - bitmap
* @aut_alg: authentication olgorithm to match - bitmap
* @network_type: enum iwm_scan_offload_network_type
* @band_selection: enum iwm_scan_offload_band_selection
* @client_bitmap: clients waiting for match - enum scan_framework_client
*/
struct iwm_scan_offload_profile {
uint8_t ssid_index;
uint8_t unicast_cipher;
uint8_t auth_alg;
uint8_t network_type;
uint8_t band_selection;
uint8_t client_bitmap;
uint8_t reserved[2];
} __packed;
/**
* iwm_scan_offload_profile_cfg - IWM_SCAN_OFFLOAD_PROFILES_CFG_API_S_VER_1
* @blaclist: AP list to filter off from scan results
* @profiles: profiles to search for match
* @blacklist_len: length of blacklist
* @num_profiles: num of profiles in the list
* @match_notify: clients waiting for match found notification
* @pass_match: clients waiting for the results
* @active_clients: active clients bitmap - enum scan_framework_client
* @any_beacon_notify: clients waiting for match notification without match
*/
struct iwm_scan_offload_profile_cfg {
struct iwm_scan_offload_profile profiles[IWM_SCAN_MAX_PROFILES];
uint8_t blacklist_len;
uint8_t num_profiles;
uint8_t match_notify;
uint8_t pass_match;
uint8_t active_clients;
uint8_t any_beacon_notify;
uint8_t reserved[2];
} __packed;
enum iwm_scan_offload_complete_status {
IWM_SCAN_OFFLOAD_COMPLETED = 1,
IWM_SCAN_OFFLOAD_ABORTED = 2,
};
enum iwm_scan_ebs_status {
IWM_SCAN_EBS_SUCCESS,
IWM_SCAN_EBS_FAILED,
IWM_SCAN_EBS_CHAN_NOT_FOUND,
IWM_SCAN_EBS_INACTIVE,
};
/**
* struct iwm_lmac_scan_complete_notif - notifies end of scanning (all channels)
* SCAN_COMPLETE_NTF_API_S_VER_3
* @scanned_channels: number of channels scanned (and number of valid results)
* @status: one of SCAN_COMP_STATUS_*
* @bt_status: BT on/off status
* @last_channel: last channel that was scanned
* @tsf_low: TSF timer (lower half) in usecs
* @tsf_high: TSF timer (higher half) in usecs
* @results: an array of scan results, only "scanned_channels" of them are valid
*/
struct iwm_lmac_scan_complete_notif {
uint8_t scanned_channels;
uint8_t status;
uint8_t bt_status;
uint8_t last_channel;
uint32_t tsf_low;
uint32_t tsf_high;
struct iwm_scan_results_notif results[];
} __packed;
/*
* END mvm/fw-api-scan.h
*/
/*
* BEGIN mvm/fw-api-sta.h
*/
/* UMAC Scan API */
/* The maximum of either of these cannot exceed 8, because we use an
* 8-bit mask (see IWM_MVM_SCAN_MASK).
*/
#define IWM_MVM_MAX_UMAC_SCANS 8
#define IWM_MVM_MAX_LMAC_SCANS 1
enum iwm_scan_config_flags {
IWM_SCAN_CONFIG_FLAG_ACTIVATE = (1 << 0),
IWM_SCAN_CONFIG_FLAG_DEACTIVATE = (1 << 1),
IWM_SCAN_CONFIG_FLAG_FORBID_CHUB_REQS = (1 << 2),
IWM_SCAN_CONFIG_FLAG_ALLOW_CHUB_REQS = (1 << 3),
IWM_SCAN_CONFIG_FLAG_SET_TX_CHAINS = (1 << 8),
IWM_SCAN_CONFIG_FLAG_SET_RX_CHAINS = (1 << 9),
IWM_SCAN_CONFIG_FLAG_SET_AUX_STA_ID = (1 << 10),
IWM_SCAN_CONFIG_FLAG_SET_ALL_TIMES = (1 << 11),
IWM_SCAN_CONFIG_FLAG_SET_EFFECTIVE_TIMES = (1 << 12),
IWM_SCAN_CONFIG_FLAG_SET_CHANNEL_FLAGS = (1 << 13),
IWM_SCAN_CONFIG_FLAG_SET_LEGACY_RATES = (1 << 14),
IWM_SCAN_CONFIG_FLAG_SET_MAC_ADDR = (1 << 15),
IWM_SCAN_CONFIG_FLAG_SET_FRAGMENTED = (1 << 16),
IWM_SCAN_CONFIG_FLAG_CLEAR_FRAGMENTED = (1 << 17),
IWM_SCAN_CONFIG_FLAG_SET_CAM_MODE = (1 << 18),
IWM_SCAN_CONFIG_FLAG_CLEAR_CAM_MODE = (1 << 19),
IWM_SCAN_CONFIG_FLAG_SET_PROMISC_MODE = (1 << 20),
IWM_SCAN_CONFIG_FLAG_CLEAR_PROMISC_MODE = (1 << 21),
/* Bits 26-31 are for num of channels in channel_array */
#define IWM_SCAN_CONFIG_N_CHANNELS(n) ((n) << 26)
};
enum iwm_scan_config_rates {
/* OFDM basic rates */
IWM_SCAN_CONFIG_RATE_6M = (1 << 0),
IWM_SCAN_CONFIG_RATE_9M = (1 << 1),
IWM_SCAN_CONFIG_RATE_12M = (1 << 2),
IWM_SCAN_CONFIG_RATE_18M = (1 << 3),
IWM_SCAN_CONFIG_RATE_24M = (1 << 4),
IWM_SCAN_CONFIG_RATE_36M = (1 << 5),
IWM_SCAN_CONFIG_RATE_48M = (1 << 6),
IWM_SCAN_CONFIG_RATE_54M = (1 << 7),
/* CCK basic rates */
IWM_SCAN_CONFIG_RATE_1M = (1 << 8),
IWM_SCAN_CONFIG_RATE_2M = (1 << 9),
IWM_SCAN_CONFIG_RATE_5M = (1 << 10),
IWM_SCAN_CONFIG_RATE_11M = (1 << 11),
/* Bits 16-27 are for supported rates */
#define IWM_SCAN_CONFIG_SUPPORTED_RATE(rate) ((rate) << 16)
};
enum iwm_channel_flags {
IWM_CHANNEL_FLAG_EBS = (1 << 0),
IWM_CHANNEL_FLAG_ACCURATE_EBS = (1 << 1),
IWM_CHANNEL_FLAG_EBS_ADD = (1 << 2),
IWM_CHANNEL_FLAG_PRE_SCAN_PASSIVE2ACTIVE = (1 << 3),
};
/**
* struct iwm_scan_config
* @flags: enum scan_config_flags
* @tx_chains: valid_tx antenna - ANT_* definitions
* @rx_chains: valid_rx antenna - ANT_* definitions
* @legacy_rates: default legacy rates - enum scan_config_rates
* @out_of_channel_time: default max out of serving channel time
* @suspend_time: default max suspend time
* @dwell_active: default dwell time for active scan
* @dwell_passive: default dwell time for passive scan
* @dwell_fragmented: default dwell time for fragmented scan
* @dwell_extended: default dwell time for channels 1, 6 and 11
* @mac_addr: default mac address to be used in probes
* @bcast_sta_id: the index of the station in the fw
* @channel_flags: default channel flags - enum iwm_channel_flags
* scan_config_channel_flag
* @channel_array: default supported channels
*/
struct iwm_scan_config {
uint32_t flags;
uint32_t tx_chains;
uint32_t rx_chains;
uint32_t legacy_rates;
uint32_t out_of_channel_time;
uint32_t suspend_time;
uint8_t dwell_active;
uint8_t dwell_passive;
uint8_t dwell_fragmented;
uint8_t dwell_extended;
uint8_t mac_addr[IEEE80211_ADDR_LEN];
uint8_t bcast_sta_id;
uint8_t channel_flags;
uint8_t channel_array[];
} __packed; /* SCAN_CONFIG_DB_CMD_API_S */
/**
* iwm_umac_scan_flags
*@IWM_UMAC_SCAN_FLAG_PREEMPTIVE: scan process triggered by this scan request
* can be preempted by other scan requests with higher priority.
* The low priority scan will be resumed when the higher proirity scan is
* completed.
*@IWM_UMAC_SCAN_FLAG_START_NOTIF: notification will be sent to the driver
* when scan starts.
*/
enum iwm_umac_scan_flags {
IWM_UMAC_SCAN_FLAG_PREEMPTIVE = (1 << 0),
IWM_UMAC_SCAN_FLAG_START_NOTIF = (1 << 1),
};
enum iwm_umac_scan_uid_offsets {
IWM_UMAC_SCAN_UID_TYPE_OFFSET = 0,
IWM_UMAC_SCAN_UID_SEQ_OFFSET = 8,
};
enum iwm_umac_scan_general_flags {
IWM_UMAC_SCAN_GEN_FLAGS_PERIODIC = (1 << 0),
IWM_UMAC_SCAN_GEN_FLAGS_OVER_BT = (1 << 1),
IWM_UMAC_SCAN_GEN_FLAGS_PASS_ALL = (1 << 2),
IWM_UMAC_SCAN_GEN_FLAGS_PASSIVE = (1 << 3),
IWM_UMAC_SCAN_GEN_FLAGS_PRE_CONNECT = (1 << 4),
IWM_UMAC_SCAN_GEN_FLAGS_ITER_COMPLETE = (1 << 5),
IWM_UMAC_SCAN_GEN_FLAGS_MULTIPLE_SSID = (1 << 6),
IWM_UMAC_SCAN_GEN_FLAGS_FRAGMENTED = (1 << 7),
IWM_UMAC_SCAN_GEN_FLAGS_RRM_ENABLED = (1 << 8),
IWM_UMAC_SCAN_GEN_FLAGS_MATCH = (1 << 9),
IWM_UMAC_SCAN_GEN_FLAGS_EXTENDED_DWELL = (1 << 10),
};
/**
* struct iwm_scan_channel_cfg_umac
* @flags: bitmap - 0-19: directed scan to i'th ssid.
* @channel_num: channel number 1-13 etc.
* @iter_count: repetition count for the channel.
* @iter_interval: interval between two scan iterations on one channel.
*/
struct iwm_scan_channel_cfg_umac {
uint32_t flags;
#define IWM_SCAN_CHANNEL_UMAC_NSSIDS(x) ((1 << (x)) - 1)
uint8_t channel_num;
uint8_t iter_count;
uint16_t iter_interval;
} __packed; /* SCAN_CHANNEL_CFG_S_VER2 */
/**
* struct iwm_scan_umac_schedule
* @interval: interval in seconds between scan iterations
* @iter_count: num of scan iterations for schedule plan, 0xff for infinite loop
* @reserved: for alignment and future use
*/
struct iwm_scan_umac_schedule {
uint16_t interval;
uint8_t iter_count;
uint8_t reserved;
} __packed; /* SCAN_SCHED_PARAM_API_S_VER_1 */
/**
* struct iwm_scan_req_umac_tail - the rest of the UMAC scan request command
* parameters following channels configuration array.
* @schedule: two scheduling plans.
* @delay: delay in TUs before starting the first scan iteration
* @reserved: for future use and alignment
* @preq: probe request with IEs blocks
* @direct_scan: list of SSIDs for directed active scan
*/
struct iwm_scan_req_umac_tail {
/* SCAN_PERIODIC_PARAMS_API_S_VER_1 */
struct iwm_scan_umac_schedule schedule[IWM_MAX_SCHED_SCAN_PLANS];
uint16_t delay;
uint16_t reserved;
/* SCAN_PROBE_PARAMS_API_S_VER_1 */
struct iwm_scan_probe_req preq;
struct iwm_ssid_ie direct_scan[IWM_PROBE_OPTION_MAX];
} __packed;
/**
* struct iwm_scan_req_umac
* @flags: &enum iwm_umac_scan_flags
* @uid: scan id, &enum iwm_umac_scan_uid_offsets
* @ooc_priority: out of channel priority - &enum iwm_scan_priority
* @general_flags: &enum iwm_umac_scan_general_flags
* @extended_dwell: dwell time for channels 1, 6 and 11
* @active_dwell: dwell time for active scan
* @passive_dwell: dwell time for passive scan
* @fragmented_dwell: dwell time for fragmented passive scan
* @max_out_time: max out of serving channel time
* @suspend_time: max suspend time
* @scan_priority: scan internal prioritization &enum iwm_scan_priority
* @channel_flags: &enum iwm_scan_channel_flags
* @n_channels: num of channels in scan request
* @reserved: for future use and alignment
* @data: &struct iwm_scan_channel_cfg_umac and
* &struct iwm_scan_req_umac_tail
*/
struct iwm_scan_req_umac {
uint32_t flags;
uint32_t uid;
uint32_t ooc_priority;
/* SCAN_GENERAL_PARAMS_API_S_VER_1 */
uint32_t general_flags;
uint8_t extended_dwell;
uint8_t active_dwell;
uint8_t passive_dwell;
uint8_t fragmented_dwell;
uint32_t max_out_time;
uint32_t suspend_time;
uint32_t scan_priority;
/* SCAN_CHANNEL_PARAMS_API_S_VER_1 */
uint8_t channel_flags;
uint8_t n_channels;
uint16_t reserved;
uint8_t data[];
} __packed; /* SCAN_REQUEST_CMD_UMAC_API_S_VER_1 */
/**
* struct iwm_umac_scan_abort
* @uid: scan id, &enum iwm_umac_scan_uid_offsets
* @flags: reserved
*/
struct iwm_umac_scan_abort {
uint32_t uid;
uint32_t flags;
} __packed; /* SCAN_ABORT_CMD_UMAC_API_S_VER_1 */
/**
* struct iwm_umac_scan_complete
* @uid: scan id, &enum iwm_umac_scan_uid_offsets
* @last_schedule: last scheduling line
* @last_iter: last scan iteration number
* @scan status: &enum iwm_scan_offload_complete_status
* @ebs_status: &enum iwm_scan_ebs_status
* @time_from_last_iter: time elapsed from last iteration
* @reserved: for future use
*/
struct iwm_umac_scan_complete {
uint32_t uid;
uint8_t last_schedule;
uint8_t last_iter;
uint8_t status;
uint8_t ebs_status;
uint32_t time_from_last_iter;
uint32_t reserved;
} __packed; /* SCAN_COMPLETE_NTF_UMAC_API_S_VER_1 */
#define IWM_SCAN_OFFLOAD_MATCHING_CHANNELS_LEN 5
/**
* struct iwm_scan_offload_profile_match - match information
* @bssid: matched bssid
* @channel: channel where the match occurred
* @energy:
* @matching_feature:
* @matching_channels: bitmap of channels that matched, referencing
* the channels passed in tue scan offload request
*/
struct iwm_scan_offload_profile_match {
uint8_t bssid[IEEE80211_ADDR_LEN];
uint16_t reserved;
uint8_t channel;
uint8_t energy;
uint8_t matching_feature;
uint8_t matching_channels[IWM_SCAN_OFFLOAD_MATCHING_CHANNELS_LEN];
} __packed; /* SCAN_OFFLOAD_PROFILE_MATCH_RESULTS_S_VER_1 */
/**
* struct iwm_scan_offload_profiles_query - match results query response
* @matched_profiles: bitmap of matched profiles, referencing the
* matches passed in the scan offload request
* @last_scan_age: age of the last offloaded scan
* @n_scans_done: number of offloaded scans done
* @gp2_d0u: GP2 when D0U occurred
* @gp2_invoked: GP2 when scan offload was invoked
* @resume_while_scanning: not used
* @self_recovery: obsolete
* @reserved: reserved
* @matches: array of match information, one for each match
*/
struct iwm_scan_offload_profiles_query {
uint32_t matched_profiles;
uint32_t last_scan_age;
uint32_t n_scans_done;
uint32_t gp2_d0u;
uint32_t gp2_invoked;
uint8_t resume_while_scanning;
uint8_t self_recovery;
uint16_t reserved;
struct iwm_scan_offload_profile_match matches[IWM_SCAN_MAX_PROFILES];
} __packed; /* SCAN_OFFLOAD_PROFILES_QUERY_RSP_S_VER_2 */
/**
* struct iwm_umac_scan_iter_complete_notif - notifies end of scanning iteration
* @uid: scan id, &enum iwm_umac_scan_uid_offsets
* @scanned_channels: number of channels scanned and number of valid elements in
* results array
* @status: one of SCAN_COMP_STATUS_*
* @bt_status: BT on/off status
* @last_channel: last channel that was scanned
* @tsf_low: TSF timer (lower half) in usecs
* @tsf_high: TSF timer (higher half) in usecs
* @results: array of scan results, only "scanned_channels" of them are valid
*/
struct iwm_umac_scan_iter_complete_notif {
uint32_t uid;
uint8_t scanned_channels;
uint8_t status;
uint8_t bt_status;
uint8_t last_channel;
uint32_t tsf_low;
uint32_t tsf_high;
struct iwm_scan_results_notif results[];
} __packed; /* SCAN_ITER_COMPLETE_NTF_UMAC_API_S_VER_1 */
/* Please keep this enum *SORTED* by hex value.
* Needed for binary search, otherwise a warning will be triggered.
*/
enum iwm_scan_subcmd_ids {
IWM_GSCAN_START_CMD = 0x0,
IWM_GSCAN_STOP_CMD = 0x1,
IWM_GSCAN_SET_HOTLIST_CMD = 0x2,
IWM_GSCAN_RESET_HOTLIST_CMD = 0x3,
IWM_GSCAN_SET_SIGNIFICANT_CHANGE_CMD = 0x4,
IWM_GSCAN_RESET_SIGNIFICANT_CHANGE_CMD = 0x5,
IWM_GSCAN_SIGNIFICANT_CHANGE_EVENT = 0xFD,
IWM_GSCAN_HOTLIST_CHANGE_EVENT = 0xFE,
IWM_GSCAN_RESULTS_AVAILABLE_EVENT = 0xFF,
};
/* STA API */
/**
* enum iwm_sta_flags - flags for the ADD_STA host command
* @IWM_STA_FLG_REDUCED_TX_PWR_CTRL:
* @IWM_STA_FLG_REDUCED_TX_PWR_DATA:
* @IWM_STA_FLG_DISABLE_TX: set if TX should be disabled
* @IWM_STA_FLG_PS: set if STA is in Power Save
* @IWM_STA_FLG_INVALID: set if STA is invalid
* @IWM_STA_FLG_DLP_EN: Direct Link Protocol is enabled
* @IWM_STA_FLG_SET_ALL_KEYS: the current key applies to all key IDs
* @IWM_STA_FLG_DRAIN_FLOW: drain flow
* @IWM_STA_FLG_PAN: STA is for PAN interface
* @IWM_STA_FLG_CLASS_AUTH:
* @IWM_STA_FLG_CLASS_ASSOC:
* @IWM_STA_FLG_CLASS_MIMO_PROT:
* @IWM_STA_FLG_MAX_AGG_SIZE_MSK: maximal size for A-MPDU
* @IWM_STA_FLG_AGG_MPDU_DENS_MSK: maximal MPDU density for Tx aggregation
* @IWM_STA_FLG_FAT_EN_MSK: support for channel width (for Tx). This flag is
* initialised by driver and can be updated by fw upon reception of
* action frames that can change the channel width. When cleared the fw
* will send all the frames in 20MHz even when FAT channel is requested.
* @IWM_STA_FLG_MIMO_EN_MSK: support for MIMO. This flag is initialised by the
* driver and can be updated by fw upon reception of action frames.
* @IWM_STA_FLG_MFP_EN: Management Frame Protection
*/
enum iwm_sta_flags {
IWM_STA_FLG_REDUCED_TX_PWR_CTRL = (1 << 3),
IWM_STA_FLG_REDUCED_TX_PWR_DATA = (1 << 6),
IWM_STA_FLG_DISABLE_TX = (1 << 4),
IWM_STA_FLG_PS = (1 << 8),
IWM_STA_FLG_DRAIN_FLOW = (1 << 12),
IWM_STA_FLG_PAN = (1 << 13),
IWM_STA_FLG_CLASS_AUTH = (1 << 14),
IWM_STA_FLG_CLASS_ASSOC = (1 << 15),
IWM_STA_FLG_RTS_MIMO_PROT = (1 << 17),
IWM_STA_FLG_MAX_AGG_SIZE_SHIFT = 19,
IWM_STA_FLG_MAX_AGG_SIZE_8K = (0 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
IWM_STA_FLG_MAX_AGG_SIZE_16K = (1 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
IWM_STA_FLG_MAX_AGG_SIZE_32K = (2 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
IWM_STA_FLG_MAX_AGG_SIZE_64K = (3 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
IWM_STA_FLG_MAX_AGG_SIZE_128K = (4 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
IWM_STA_FLG_MAX_AGG_SIZE_256K = (5 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
IWM_STA_FLG_MAX_AGG_SIZE_512K = (6 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
IWM_STA_FLG_MAX_AGG_SIZE_1024K = (7 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
IWM_STA_FLG_MAX_AGG_SIZE_MSK = (7 << IWM_STA_FLG_MAX_AGG_SIZE_SHIFT),
IWM_STA_FLG_AGG_MPDU_DENS_SHIFT = 23,
IWM_STA_FLG_AGG_MPDU_DENS_2US = (4 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT),
IWM_STA_FLG_AGG_MPDU_DENS_4US = (5 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT),
IWM_STA_FLG_AGG_MPDU_DENS_8US = (6 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT),
IWM_STA_FLG_AGG_MPDU_DENS_16US = (7 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT),
IWM_STA_FLG_AGG_MPDU_DENS_MSK = (7 << IWM_STA_FLG_AGG_MPDU_DENS_SHIFT),
IWM_STA_FLG_FAT_EN_20MHZ = (0 << 26),
IWM_STA_FLG_FAT_EN_40MHZ = (1 << 26),
IWM_STA_FLG_FAT_EN_80MHZ = (2 << 26),
IWM_STA_FLG_FAT_EN_160MHZ = (3 << 26),
IWM_STA_FLG_FAT_EN_MSK = (3 << 26),
IWM_STA_FLG_MIMO_EN_SISO = (0 << 28),
IWM_STA_FLG_MIMO_EN_MIMO2 = (1 << 28),
IWM_STA_FLG_MIMO_EN_MIMO3 = (2 << 28),
IWM_STA_FLG_MIMO_EN_MSK = (3 << 28),
};
/**
* enum iwm_sta_key_flag - key flags for the ADD_STA host command
* @IWM_STA_KEY_FLG_NO_ENC: no encryption
* @IWM_STA_KEY_FLG_WEP: WEP encryption algorithm
* @IWM_STA_KEY_FLG_CCM: CCMP encryption algorithm
* @IWM_STA_KEY_FLG_TKIP: TKIP encryption algorithm
* @IWM_STA_KEY_FLG_EXT: extended cipher algorithm (depends on the FW support)
* @IWM_STA_KEY_FLG_CMAC: CMAC encryption algorithm
* @IWM_STA_KEY_FLG_ENC_UNKNOWN: unknown encryption algorithm
* @IWM_STA_KEY_FLG_EN_MSK: mask for encryption algorithmi value
* @IWM_STA_KEY_FLG_WEP_KEY_MAP: wep is either a group key (0 - legacy WEP) or from
* station info array (1 - n 1X mode)
* @IWM_STA_KEY_FLG_KEYID_MSK: the index of the key
* @IWM_STA_KEY_NOT_VALID: key is invalid
* @IWM_STA_KEY_FLG_WEP_13BYTES: set for 13 bytes WEP key
* @IWM_STA_KEY_MULTICAST: set for multical key
* @IWM_STA_KEY_MFP: key is used for Management Frame Protection
*/
enum iwm_sta_key_flag {
IWM_STA_KEY_FLG_NO_ENC = (0 << 0),
IWM_STA_KEY_FLG_WEP = (1 << 0),
IWM_STA_KEY_FLG_CCM = (2 << 0),
IWM_STA_KEY_FLG_TKIP = (3 << 0),
IWM_STA_KEY_FLG_EXT = (4 << 0),
IWM_STA_KEY_FLG_CMAC = (6 << 0),
IWM_STA_KEY_FLG_ENC_UNKNOWN = (7 << 0),
IWM_STA_KEY_FLG_EN_MSK = (7 << 0),
IWM_STA_KEY_FLG_WEP_KEY_MAP = (1 << 3),
IWM_STA_KEY_FLG_KEYID_POS = 8,
IWM_STA_KEY_FLG_KEYID_MSK = (3 << IWM_STA_KEY_FLG_KEYID_POS),
IWM_STA_KEY_NOT_VALID = (1 << 11),
IWM_STA_KEY_FLG_WEP_13BYTES = (1 << 12),
IWM_STA_KEY_MULTICAST = (1 << 14),
IWM_STA_KEY_MFP = (1 << 15),
};
/**
* enum iwm_sta_modify_flag - indicate to the fw what flag are being changed
* @IWM_STA_MODIFY_QUEUE_REMOVAL: this command removes a queue
* @IWM_STA_MODIFY_TID_DISABLE_TX: this command modifies %tid_disable_tx
* @IWM_STA_MODIFY_TX_RATE: unused
* @IWM_STA_MODIFY_ADD_BA_TID: this command modifies %add_immediate_ba_tid
* @IWM_STA_MODIFY_REMOVE_BA_TID: this command modifies %remove_immediate_ba_tid
* @IWM_STA_MODIFY_SLEEPING_STA_TX_COUNT: this command modifies %sleep_tx_count
* @IWM_STA_MODIFY_PROT_TH:
* @IWM_STA_MODIFY_QUEUES: modify the queues used by this station
*/
enum iwm_sta_modify_flag {
IWM_STA_MODIFY_QUEUE_REMOVAL = (1 << 0),
IWM_STA_MODIFY_TID_DISABLE_TX = (1 << 1),
IWM_STA_MODIFY_TX_RATE = (1 << 2),
IWM_STA_MODIFY_ADD_BA_TID = (1 << 3),
IWM_STA_MODIFY_REMOVE_BA_TID = (1 << 4),
IWM_STA_MODIFY_SLEEPING_STA_TX_COUNT = (1 << 5),
IWM_STA_MODIFY_PROT_TH = (1 << 6),
IWM_STA_MODIFY_QUEUES = (1 << 7),
};
#define IWM_STA_MODE_MODIFY 1
/**
* enum iwm_sta_sleep_flag - type of sleep of the station
* @IWM_STA_SLEEP_STATE_AWAKE:
* @IWM_STA_SLEEP_STATE_PS_POLL:
* @IWM_STA_SLEEP_STATE_UAPSD:
* @IWM_STA_SLEEP_STATE_MOREDATA: set more-data bit on
* (last) released frame
*/
enum iwm_sta_sleep_flag {
IWM_STA_SLEEP_STATE_AWAKE = 0,
IWM_STA_SLEEP_STATE_PS_POLL = (1 << 0),
IWM_STA_SLEEP_STATE_UAPSD = (1 << 1),
IWM_STA_SLEEP_STATE_MOREDATA = (1 << 2),
};
/* STA ID and color bits definitions */
#define IWM_STA_ID_SEED (0x0f)
#define IWM_STA_ID_POS (0)
#define IWM_STA_ID_MSK (IWM_STA_ID_SEED << IWM_STA_ID_POS)
#define IWM_STA_COLOR_SEED (0x7)
#define IWM_STA_COLOR_POS (4)
#define IWM_STA_COLOR_MSK (IWM_STA_COLOR_SEED << IWM_STA_COLOR_POS)
#define IWM_STA_ID_N_COLOR_GET_COLOR(id_n_color) \
(((id_n_color) & IWM_STA_COLOR_MSK) >> IWM_STA_COLOR_POS)
#define IWM_STA_ID_N_COLOR_GET_ID(id_n_color) \
(((id_n_color) & IWM_STA_ID_MSK) >> IWM_STA_ID_POS)
#define IWM_STA_KEY_MAX_NUM (16)
#define IWM_STA_KEY_IDX_INVALID (0xff)
#define IWM_STA_KEY_MAX_DATA_KEY_NUM (4)
#define IWM_MAX_GLOBAL_KEYS (4)
#define IWM_STA_KEY_LEN_WEP40 (5)
#define IWM_STA_KEY_LEN_WEP104 (13)
/**
* struct iwm_mvm_keyinfo - key information
* @key_flags: type %iwm_sta_key_flag
* @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection
* @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx
* @key_offset: key offset in the fw's key table
* @key: 16-byte unicast decryption key
* @tx_secur_seq_cnt: initial RSC / PN needed for replay check
* @hw_tkip_mic_rx_key: byte: MIC Rx Key - used for TKIP only
* @hw_tkip_mic_tx_key: byte: MIC Tx Key - used for TKIP only
*/
struct iwm_mvm_keyinfo {
uint16_t key_flags;
uint8_t tkip_rx_tsc_byte2;
uint8_t reserved1;
uint16_t tkip_rx_ttak[5];
uint8_t key_offset;
uint8_t reserved2;
uint8_t key[16];
uint64_t tx_secur_seq_cnt;
uint64_t hw_tkip_mic_rx_key;
uint64_t hw_tkip_mic_tx_key;
} __packed;
#define IWM_ADD_STA_STATUS_MASK 0xFF
#define IWM_ADD_STA_BAID_VALID_MASK 0x8000
#define IWM_ADD_STA_BAID_MASK 0x7F00
#define IWM_ADD_STA_BAID_SHIFT 8
/**
* struct iwm_mvm_add_sta_cmd - Add/modify a station in the fw's sta table.
* ( REPLY_ADD_STA = 0x18 )
* @add_modify: 1: modify existing, 0: add new station
* @awake_acs:
* @tid_disable_tx: is tid BIT(tid) enabled for Tx. Clear BIT(x) to enable
* AMPDU for tid x. Set %IWM_STA_MODIFY_TID_DISABLE_TX to change this field.
* @mac_id_n_color: the Mac context this station belongs to
* @addr[IEEE80211_ADDR_LEN]: station's MAC address
* @sta_id: index of station in uCode's station table
* @modify_mask: IWM_STA_MODIFY_*, selects which parameters to modify vs. leave
* alone. 1 - modify, 0 - don't change.
* @station_flags: look at %iwm_sta_flags
* @station_flags_msk: what of %station_flags have changed
* @add_immediate_ba_tid: tid for which to add block-ack support (Rx)
* Set %IWM_STA_MODIFY_ADD_BA_TID to use this field, and also set
* add_immediate_ba_ssn.
* @remove_immediate_ba_tid: tid for which to remove block-ack support (Rx)
* Set %IWM_STA_MODIFY_REMOVE_BA_TID to use this field
* @add_immediate_ba_ssn: ssn for the Rx block-ack session. Used together with
* add_immediate_ba_tid.
* @sleep_tx_count: number of packets to transmit to station even though it is
* asleep. Used to synchronise PS-poll and u-APSD responses while ucode
* keeps track of STA sleep state.
* @sleep_state_flags: Look at %iwm_sta_sleep_flag.
* @assoc_id: assoc_id to be sent in VHT PLCP (9-bit), for grp use 0, for AP
* mac-addr.
* @beamform_flags: beam forming controls
* @tfd_queue_msk: tfd queues used by this station
*
* The device contains an internal table of per-station information, with info
* on security keys, aggregation parameters, and Tx rates for initial Tx
* attempt and any retries (set by IWM_REPLY_TX_LINK_QUALITY_CMD).
*
* ADD_STA sets up the table entry for one station, either creating a new
* entry, or modifying a pre-existing one.
*/
struct iwm_mvm_add_sta_cmd {
uint8_t add_modify;
uint8_t awake_acs;
uint16_t tid_disable_tx;
uint32_t mac_id_n_color;
uint8_t addr[IEEE80211_ADDR_LEN]; /* _STA_ID_MODIFY_INFO_API_S_VER_1 */
uint16_t reserved2;
uint8_t sta_id;
uint8_t modify_mask;
uint16_t reserved3;
uint32_t station_flags;
uint32_t station_flags_msk;
uint8_t add_immediate_ba_tid;
uint8_t remove_immediate_ba_tid;
uint16_t add_immediate_ba_ssn;
uint16_t sleep_tx_count;
uint16_t sleep_state_flags;
uint16_t assoc_id;
uint16_t beamform_flags;
uint32_t tfd_queue_msk;
} __packed; /* ADD_STA_CMD_API_S_VER_7 */
/**
* struct iwm_mvm_add_sta_key_cmd - add/modify sta key
* ( IWM_REPLY_ADD_STA_KEY = 0x17 )
* @sta_id: index of station in uCode's station table
* @key_offset: key offset in key storage
* @key_flags: type %iwm_sta_key_flag
* @key: key material data
* @key2: key material data
* @rx_secur_seq_cnt: RX security sequence counter for the key
* @tkip_rx_tsc_byte2: TSC[2] for key mix ph1 detection
* @tkip_rx_ttak: 10-byte unicast TKIP TTAK for Rx
*/
struct iwm_mvm_add_sta_key_cmd {
uint8_t sta_id;
uint8_t key_offset;
uint16_t key_flags;
uint8_t key[16];
uint8_t key2[16];
uint8_t rx_secur_seq_cnt[16];
uint8_t tkip_rx_tsc_byte2;
uint8_t reserved;
uint16_t tkip_rx_ttak[5];
} __packed; /* IWM_ADD_MODIFY_STA_KEY_API_S_VER_1 */
/**
* enum iwm_mvm_add_sta_rsp_status - status in the response to ADD_STA command
* @IWM_ADD_STA_SUCCESS: operation was executed successfully
* @IWM_ADD_STA_STATIONS_OVERLOAD: no room left in the fw's station table
* @IWM_ADD_STA_IMMEDIATE_BA_FAILURE: can't add Rx block ack session
* @IWM_ADD_STA_MODIFY_NON_EXISTING_STA: driver requested to modify a station
* that doesn't exist.
*/
enum iwm_mvm_add_sta_rsp_status {
IWM_ADD_STA_SUCCESS = 0x1,
IWM_ADD_STA_STATIONS_OVERLOAD = 0x2,
IWM_ADD_STA_IMMEDIATE_BA_FAILURE = 0x4,
IWM_ADD_STA_MODIFY_NON_EXISTING_STA = 0x8,
};
/**
* struct iwm_mvm_rm_sta_cmd - Add / modify a station in the fw's station table
* ( IWM_REMOVE_STA = 0x19 )
* @sta_id: the station id of the station to be removed
*/
struct iwm_mvm_rm_sta_cmd {
uint8_t sta_id;
uint8_t reserved[3];
} __packed; /* IWM_REMOVE_STA_CMD_API_S_VER_2 */
/**
* struct iwm_mvm_mgmt_mcast_key_cmd
* ( IWM_MGMT_MCAST_KEY = 0x1f )
* @ctrl_flags: %iwm_sta_key_flag
* @IGTK:
* @K1: IGTK master key
* @K2: IGTK sub key
* @sta_id: station ID that support IGTK
* @key_id:
* @receive_seq_cnt: initial RSC/PN needed for replay check
*/
struct iwm_mvm_mgmt_mcast_key_cmd {
uint32_t ctrl_flags;
uint8_t IGTK[16];
uint8_t K1[16];
uint8_t K2[16];
uint32_t key_id;
uint32_t sta_id;
uint64_t receive_seq_cnt;
} __packed; /* SEC_MGMT_MULTICAST_KEY_CMD_API_S_VER_1 */
struct iwm_mvm_wep_key {
uint8_t key_index;
uint8_t key_offset;
uint16_t reserved1;
uint8_t key_size;
uint8_t reserved2[3];
uint8_t key[16];
} __packed;
struct iwm_mvm_wep_key_cmd {
uint32_t mac_id_n_color;
uint8_t num_keys;
uint8_t decryption_type;
uint8_t flags;
uint8_t reserved;
struct iwm_mvm_wep_key wep_key[0];
} __packed; /* SEC_CURR_WEP_KEY_CMD_API_S_VER_2 */
/*
* END mvm/fw-api-sta.h
*/
/*
* BT coex
*/
enum iwm_bt_coex_mode {
IWM_BT_COEX_DISABLE = 0x0,
IWM_BT_COEX_NW = 0x1,
IWM_BT_COEX_BT = 0x2,
IWM_BT_COEX_WIFI = 0x3,
}; /* BT_COEX_MODES_E */
enum iwm_bt_coex_enabled_modules {
IWM_BT_COEX_MPLUT_ENABLED = (1 << 0),
IWM_BT_COEX_MPLUT_BOOST_ENABLED = (1 << 1),
IWM_BT_COEX_SYNC2SCO_ENABLED = (1 << 2),
IWM_BT_COEX_CORUN_ENABLED = (1 << 3),
IWM_BT_COEX_HIGH_BAND_RET = (1 << 4),
}; /* BT_COEX_MODULES_ENABLE_E_VER_1 */
/**
* struct iwm_bt_coex_cmd - bt coex configuration command
* @mode: enum %iwm_bt_coex_mode
* @enabled_modules: enum %iwm_bt_coex_enabled_modules
*
* The structure is used for the BT_COEX command.
*/
struct iwm_bt_coex_cmd {
uint32_t mode;
uint32_t enabled_modules;
} __packed; /* BT_COEX_CMD_API_S_VER_6 */
/*
* Location Aware Regulatory (LAR) API - MCC updates
*/
/**
* struct iwm_mcc_update_cmd_v1 - Request the device to update geographic
* regulatory profile according to the given MCC (Mobile Country Code).
* The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
* 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
* MCC in the cmd response will be the relevant MCC in the NVM.
* @mcc: given mobile country code
* @source_id: the source from where we got the MCC, see iwm_mcc_source
* @reserved: reserved for alignment
*/
struct iwm_mcc_update_cmd_v1 {
uint16_t mcc;
uint8_t source_id;
uint8_t reserved;
} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_1 */
/**
* struct iwm_mcc_update_cmd - Request the device to update geographic
* regulatory profile according to the given MCC (Mobile Country Code).
* The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
* 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
* MCC in the cmd response will be the relevant MCC in the NVM.
* @mcc: given mobile country code
* @source_id: the source from where we got the MCC, see iwm_mcc_source
* @reserved: reserved for alignment
* @key: integrity key for MCC API OEM testing
* @reserved2: reserved
*/
struct iwm_mcc_update_cmd {
uint16_t mcc;
uint8_t source_id;
uint8_t reserved;
uint32_t key;
uint32_t reserved2[5];
} __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */
/**
* iwm_mcc_update_resp_v1 - response to MCC_UPDATE_CMD.
* Contains the new channel control profile map, if changed, and the new MCC
* (mobile country code).
* The new MCC may be different than what was requested in MCC_UPDATE_CMD.
* @status: see &enum iwm_mcc_update_status
* @mcc: the new applied MCC
* @cap: capabilities for all channels which matches the MCC
* @source_id: the MCC source, see iwm_mcc_source
* @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
* channels, depending on platform)
* @channels: channel control data map, DWORD for each channel. Only the first
* 16bits are used.
*/
struct iwm_mcc_update_resp_v1 {
uint32_t status;
uint16_t mcc;
uint8_t cap;
uint8_t source_id;
uint32_t n_channels;
uint32_t channels[0];
} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */
/**
* iwm_mcc_update_resp - response to MCC_UPDATE_CMD.
* Contains the new channel control profile map, if changed, and the new MCC
* (mobile country code).
* The new MCC may be different than what was requested in MCC_UPDATE_CMD.
* @status: see &enum iwm_mcc_update_status
* @mcc: the new applied MCC
* @cap: capabilities for all channels which matches the MCC
* @source_id: the MCC source, see iwm_mcc_source
* @time: time elapsed from the MCC test start (in 30 seconds TU)
* @reserved: reserved.
* @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51
* channels, depending on platform)
* @channels: channel control data map, DWORD for each channel. Only the first
* 16bits are used.
*/
struct iwm_mcc_update_resp {
uint32_t status;
uint16_t mcc;
uint8_t cap;
uint8_t source_id;
uint16_t time;
uint16_t reserved;
uint32_t n_channels;
uint32_t channels[0];
} __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_2 */
/**
* struct iwm_mcc_chub_notif - chub notifies of mcc change
* (MCC_CHUB_UPDATE_CMD = 0xc9)
* The Chub (Communication Hub, CommsHUB) is a HW component that connects to
* the cellular and connectivity cores that gets updates of the mcc, and
* notifies the ucode directly of any mcc change.
* The ucode requests the driver to request the device to update geographic
* regulatory profile according to the given MCC (Mobile Country Code).
* The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain.
* 'ZZ' MCC will be used to switch to NVM default profile; in this case, the
* MCC in the cmd response will be the relevant MCC in the NVM.
* @mcc: given mobile country code
* @source_id: identity of the change originator, see iwm_mcc_source
* @reserved1: reserved for alignment
*/
struct iwm_mcc_chub_notif {
uint16_t mcc;
uint8_t source_id;
uint8_t reserved1;
} __packed; /* LAR_MCC_NOTIFY_S */
enum iwm_mcc_update_status {
IWM_MCC_RESP_NEW_CHAN_PROFILE,
IWM_MCC_RESP_SAME_CHAN_PROFILE,
IWM_MCC_RESP_INVALID,
IWM_MCC_RESP_NVM_DISABLED,
IWM_MCC_RESP_ILLEGAL,
IWM_MCC_RESP_LOW_PRIORITY,
IWM_MCC_RESP_TEST_MODE_ACTIVE,
IWM_MCC_RESP_TEST_MODE_NOT_ACTIVE,
IWM_MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE,
};
enum iwm_mcc_source {
IWM_MCC_SOURCE_OLD_FW = 0,
IWM_MCC_SOURCE_ME = 1,
IWM_MCC_SOURCE_BIOS = 2,
IWM_MCC_SOURCE_3G_LTE_HOST = 3,
IWM_MCC_SOURCE_3G_LTE_DEVICE = 4,
IWM_MCC_SOURCE_WIFI = 5,
IWM_MCC_SOURCE_RESERVED = 6,
IWM_MCC_SOURCE_DEFAULT = 7,
IWM_MCC_SOURCE_UNINITIALIZED = 8,
IWM_MCC_SOURCE_MCC_API = 9,
IWM_MCC_SOURCE_GET_CURRENT = 0x10,
IWM_MCC_SOURCE_GETTING_MCC_TEST_MODE = 0x11,
};
/**
* struct iwm_dts_measurement_notif_v1 - measurements notification
*
* @temp: the measured temperature
* @voltage: the measured voltage
*/
struct iwm_dts_measurement_notif_v1 {
int32_t temp;
int32_t voltage;
} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_1*/
/**
* struct iwm_dts_measurement_notif_v2 - measurements notification
*
* @temp: the measured temperature
* @voltage: the measured voltage
* @threshold_idx: the trip index that was crossed
*/
struct iwm_dts_measurement_notif_v2 {
int32_t temp;
int32_t voltage;
int32_t threshold_idx;
} __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_2 */
/*
* Some cherry-picked definitions
*/
#define IWM_FRAME_LIMIT 64
/*
* These functions retrieve specific information from the id field in
* the iwm_host_cmd struct which contains the command id, the group id,
* and the version of the command and vice versa.
*/
static inline uint8_t
iwm_cmd_opcode(uint32_t cmdid)
{
return cmdid & 0xff;
}
static inline uint8_t
iwm_cmd_groupid(uint32_t cmdid)
{
return ((cmdid & 0xff00) >> 8);
}
static inline uint8_t
iwm_cmd_version(uint32_t cmdid)
{
return ((cmdid & 0xff0000) >> 16);
}
static inline uint32_t
iwm_cmd_id(uint8_t opcode, uint8_t groupid, uint8_t version)
{
return opcode + (groupid << 8) + (version << 16);
}
/* make uint16_t wide id out of uint8_t group and opcode */
#define IWM_WIDE_ID(grp, opcode) ((grp << 8) | opcode)
/* due to the conversion, this group is special */
#define IWM_ALWAYS_LONG_GROUP 1
struct iwm_cmd_header {
uint8_t code;
uint8_t flags;
uint8_t idx;
uint8_t qid;
} __packed;
struct iwm_cmd_header_wide {
uint8_t opcode;
uint8_t group_id;
uint8_t idx;
uint8_t qid;
uint16_t length;
uint8_t reserved;
uint8_t version;
} __packed;
/**
* enum iwm_power_scheme
* @IWM_POWER_LEVEL_CAM - Continuously Active Mode
* @IWM_POWER_LEVEL_BPS - Balanced Power Save (default)
* @IWM_POWER_LEVEL_LP - Low Power
*/
enum iwm_power_scheme {
IWM_POWER_SCHEME_CAM = 1,
IWM_POWER_SCHEME_BPS,
IWM_POWER_SCHEME_LP
};
#define IWM_DEF_CMD_PAYLOAD_SIZE 320
#define IWM_MAX_CMD_PAYLOAD_SIZE ((4096 - 4) - sizeof(struct iwm_cmd_header))
#define IWM_CMD_FAILED_MSK 0x40
/**
* struct iwm_device_cmd
*
* For allocation of the command and tx queues, this establishes the overall
* size of the largest command we send to uCode, except for commands that
* aren't fully copied and use other TFD space.
*/
struct iwm_device_cmd {
union {
struct {
struct iwm_cmd_header hdr;
uint8_t data[IWM_DEF_CMD_PAYLOAD_SIZE];
};
struct {
struct iwm_cmd_header_wide hdr_wide;
uint8_t data_wide[IWM_DEF_CMD_PAYLOAD_SIZE -
sizeof(struct iwm_cmd_header_wide) +
sizeof(struct iwm_cmd_header)];
};
};
} __packed;
struct iwm_rx_packet {
/*
* The first 4 bytes of the RX frame header contain both the RX frame
* size and some flags.
* Bit fields:
* 31: flag flush RB request
* 30: flag ignore TC (terminal counter) request
* 29: flag fast IRQ request
* 28-14: Reserved
* 13-00: RX frame size
*/
uint32_t len_n_flags;
struct iwm_cmd_header hdr;
uint8_t data[];
} __packed;
#define IWM_FH_RSCSR_FRAME_SIZE_MSK 0x00003fff
#define IWM_FH_RSCSR_FRAME_INVALID 0x55550000
#define IWM_FH_RSCSR_FRAME_ALIGN 0x40
static inline uint32_t
iwm_rx_packet_len(const struct iwm_rx_packet *pkt)
{
return le32toh(pkt->len_n_flags) & IWM_FH_RSCSR_FRAME_SIZE_MSK;
}
static inline uint32_t
iwm_rx_packet_payload_len(const struct iwm_rx_packet *pkt)
{
return iwm_rx_packet_len(pkt) - sizeof(pkt->hdr);
}
#define IWM_MIN_DBM -100
#define IWM_MAX_DBM -33 /* realistic guess */
#define IWM_READ(sc, reg) \
bus_space_read_4((sc)->sc_st, (sc)->sc_sh, (reg))
#define IWM_WRITE(sc, reg, val) \
bus_space_write_4((sc)->sc_st, (sc)->sc_sh, (reg), (val))
#define IWM_WRITE_1(sc, reg, val) \
bus_space_write_1((sc)->sc_st, (sc)->sc_sh, (reg), (val))
#define IWM_SETBITS(sc, reg, mask) \
IWM_WRITE(sc, reg, IWM_READ(sc, reg) | (mask))
#define IWM_CLRBITS(sc, reg, mask) \
IWM_WRITE(sc, reg, IWM_READ(sc, reg) & ~(mask))
#define IWM_BARRIER_WRITE(sc) \
bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, (sc)->sc_sz, \
BUS_SPACE_BARRIER_WRITE)
#define IWM_BARRIER_READ_WRITE(sc) \
bus_space_barrier((sc)->sc_st, (sc)->sc_sh, 0, (sc)->sc_sz, \
BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE)
#endif /* __IF_IWM_REG_H__ */
Reference in New Issue View Git Blame Copy Permalink