5a9d50ef06
- Adapt it for new, incompatible, DT bindings introduced by r306197. - Add support for USB super speed pads/ports. MFC after: 3 weeks
1209 lines
32 KiB
C
1209 lines
32 KiB
C
/*-
|
|
* Copyright (c) 2016 Michal Meloun <mmel@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/fdt.h>
|
|
|
|
#include <dev/extres/hwreset/hwreset.h>
|
|
#include <dev/extres/phy/phy.h>
|
|
#include <dev/extres/regulator/regulator.h>
|
|
#include <dev/fdt/fdt_common.h>
|
|
#include <dev/fdt/fdt_pinctrl.h>
|
|
#include <dev/ofw/openfirm.h>
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/ofw_bus_subr.h>
|
|
|
|
#include <arm/nvidia/tegra_efuse.h>
|
|
|
|
#include <gnu/dts/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
|
|
|
|
#include "phy_if.h"
|
|
|
|
/* FUSE calibration data. */
|
|
#define FUSE_XUSB_CALIB 0x0F0
|
|
#define FUSE_XUSB_CALIB_HS_CURR_LEVEL_123(x) (((x) >> 15) & 0x3F);
|
|
#define FUSE_XUSB_CALIB_HS_IREF_CAP(x) (((x) >> 13) & 0x03);
|
|
#define FUSE_XUSB_CALIB_HS_SQUELCH_LEVEL(x) (((x) >> 11) & 0x03);
|
|
#define FUSE_XUSB_CALIB_HS_TERM_RANGE_ADJ(x) (((x) >> 7) & 0x0F);
|
|
#define FUSE_XUSB_CALIB_HS_CURR_LEVEL_0(x) (((x) >> 0) & 0x3F);
|
|
|
|
|
|
/* Registers. */
|
|
#define XUSB_PADCTL_USB2_PAD_MUX 0x004
|
|
|
|
#define XUSB_PADCTL_USB2_PORT_CAP 0x008
|
|
#define USB2_PORT_CAP_ULPI_PORT_INTERNAL (1 << 25)
|
|
#define USB2_PORT_CAP_ULPI_PORT_CAP (1 << 24)
|
|
#define USB2_PORT_CAP_PORT_REVERSE_ID(p) (1 << (3 + (p) * 4))
|
|
#define USB2_PORT_CAP_PORT_INTERNAL(p) (1 << (2 + (p) * 4))
|
|
#define USB2_PORT_CAP_PORT_CAP(p, x) (((x) & 3) << ((p) * 4))
|
|
#define USB2_PORT_CAP_PORT_CAP_OTG 0x3
|
|
#define USB2_PORT_CAP_PORT_CAP_DEVICE 0x2
|
|
#define USB2_PORT_CAP_PORT_CAP_HOST 0x1
|
|
#define USB2_PORT_CAP_PORT_CAP_DISABLED 0x0
|
|
|
|
#define XUSB_PADCTL_SS_PORT_MAP 0x014
|
|
#define SS_PORT_MAP_PORT_INTERNAL(p) (1 << (3 + (p) * 4))
|
|
#define SS_PORT_MAP_PORT_MAP(p, x) (((x) & 7) << ((p) * 4))
|
|
|
|
#define XUSB_PADCTL_ELPG_PROGRAM 0x01C
|
|
#define ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN (1 << 26)
|
|
#define ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY (1 << 25)
|
|
#define ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN (1 << 24)
|
|
#define ELPG_PROGRAM_SSP_ELPG_VCORE_DOWN(x) (1 << (18 + (x) * 4))
|
|
#define ELPG_PROGRAM_SSP_ELPG_CLAMP_EN_EARLY(x) (1 << (17 + (x) * 4))
|
|
#define ELPG_PROGRAM_SSP_ELPG_CLAMP_EN(x) (1 << (16 + (x) * 4))
|
|
|
|
#define XUSB_PADCTL_IOPHY_PLL_P0_CTL1 0x040
|
|
#define IOPHY_PLL_P0_CTL1_PLL0_LOCKDET (1 << 19)
|
|
#define IOPHY_PLL_P0_CTL1_REFCLK_SEL(x) (((x) & 0xF) << 12)
|
|
#define IOPHY_PLL_P0_CTL1_PLL_RST (1 << 1)
|
|
|
|
#define XUSB_PADCTL_IOPHY_PLL_P0_CTL2 0x044
|
|
#define IOPHY_PLL_P0_CTL2_REFCLKBUF_EN (1 << 6)
|
|
#define IOPHY_PLL_P0_CTL2_TXCLKREF_EN (1 << 5)
|
|
#define IOPHY_PLL_P0_CTL2_TXCLKREF_SEL (1 << 4)
|
|
|
|
#define XUSB_PADCTL_IOPHY_USB3_PAD_CTL2(x) (0x058 + (x) * 4)
|
|
#define IOPHY_USB3_PAD_CTL2_CDR_CNTL(x) (((x) & 0x00FF) << 4)
|
|
#define IOPHY_USB3_PAD_CTL2_RX_EQ(x) (((x) & 0xFFFF) << 8)
|
|
#define IOPHY_USB3_PAD_CTL2_RX_WANDER(x) (((x) & 0x000F) << 4)
|
|
#define IOPHY_USB3_PAD_CTL2_RX_TERM_CNTL(x) (((x) & 0x0003) << 2)
|
|
#define IOPHY_USB3_PAD_CTL2_TX_TERM_CNTL(x) (((x) & 0x0003) << 0)
|
|
|
|
|
|
#define XUSB_PADCTL_IOPHY_USB3_PAD_CTL4(x) (0x068 + (x) * 4)
|
|
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL0(x) (0x0A0 + (x) * 4)
|
|
#define USB2_OTG_PAD_CTL0_LSBIAS_SEL (1 << 23)
|
|
#define USB2_OTG_PAD_CTL0_DISCON_DETECT_METHOD (1 << 22)
|
|
#define USB2_OTG_PAD_CTL0_PD_ZI (1 << 21)
|
|
#define USB2_OTG_PAD_CTL0_PD2 (1 << 20)
|
|
#define USB2_OTG_PAD_CTL0_PD (1 << 19)
|
|
#define USB2_OTG_PAD_CTL0_TERM_EN (1 << 18)
|
|
#define USB2_OTG_PAD_CTL0_LS_LS_FSLEW(x) (((x) & 0x03) << 16)
|
|
#define USB2_OTG_PAD_CTL0_LS_RSLEW(x) (((x) & 0x03) << 14)
|
|
#define USB2_OTG_PAD_CTL0_FS_SLEW(x) (((x) & 0x03) << 12)
|
|
#define USB2_OTG_PAD_CTL0_HS_SLEW(x) (((x) & 0x3F) << 6)
|
|
#define USB2_OTG_PAD_CTL0_HS_CURR_LEVEL(x) (((x) & 0x3F) << 0)
|
|
|
|
#define XUSB_PADCTL_USB2_OTG_PAD_CTL1(x) (0x0AC + (x) * 4)
|
|
#define USB2_OTG_PAD_CTL1_RPU_RANGE_ADJ(x) (((x) & 0x3) << 11)
|
|
#define USB2_OTG_PAD_CTL1_HS_IREF_CAP(x) (((x) & 0x3) << 9)
|
|
#define USB2_OTG_PAD_CTL1_SPARE(x) (((x) & 0x3) << 7)
|
|
#define USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ(x) (((x) & 0xF) << 3)
|
|
#define USB2_OTG_PAD_CTL1_PD_DR (1 << 2)
|
|
#define USB2_OTG_PAD_CTL1_PD_DISC_FORCE_POWERUP (1 << 1)
|
|
#define USB2_OTG_PAD_CTL1_PD_CHRP_FORCE_POWERUP (1 << 0)
|
|
|
|
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0 0x0B8
|
|
#define USB2_BIAS_PAD_CTL0_ADJRPU(x) (((x) & 0x7) << 14)
|
|
#define USB2_BIAS_PAD_CTL0_PD_TRK (1 << 13)
|
|
#define USB2_BIAS_PAD_CTL0_PD (1 << 12)
|
|
#define USB2_BIAS_PAD_CTL0_TERM_OFFSETL(x) (((x) & 0x3) << 9)
|
|
#define USB2_BIAS_PAD_CTL0_VBUS_LEVEL(x) (((x) & 0x3) << 7)
|
|
#define USB2_BIAS_PAD_CTL0_HS_CHIRP_LEVEL(x) (((x) & 0x3) << 5)
|
|
#define USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL(x) (((x) & 0x7) << 2)
|
|
#define USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL(x) (((x) & 0x3) << 0)
|
|
|
|
#define XUSB_PADCTL_HSIC_PAD0_CTL0 0x0C8
|
|
#define HSIC_PAD0_CTL0_HSIC_OPT(x) (((x) & 0xF) << 16)
|
|
#define HSIC_PAD0_CTL0_TX_SLEWN(x) (((x) & 0xF) << 12)
|
|
#define HSIC_PAD0_CTL0_TX_SLEWP(x) (((x) & 0xF) << 8)
|
|
#define HSIC_PAD0_CTL0_TX_RTUNEN(x) (((x) & 0xF) << 4)
|
|
#define HSIC_PAD0_CTL0_TX_RTUNEP(x) (((x) & 0xF) << 0)
|
|
|
|
#define XUSB_PADCTL_USB3_PAD_MUX 0x134
|
|
#define USB3_PAD_MUX_PCIE_IDDQ_DISABLE(x) (1 << (1 + (x)))
|
|
#define USB3_PAD_MUX_SATA_IDDQ_DISABLE (1 << 6)
|
|
|
|
|
|
#define XUSB_PADCTL_IOPHY_PLL_S0_CTL1 0x138
|
|
#define IOPHY_PLL_S0_CTL1_PLL1_LOCKDET (1 << 27)
|
|
#define IOPHY_PLL_S0_CTL1_PLL1_MODE (1 << 24)
|
|
#define IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD (1 << 3)
|
|
#define IOPHY_PLL_S0_CTL1_PLL_RST_L (1 << 1)
|
|
#define IOPHY_PLL_S0_CTL1_PLL_IDDQ (1 << 0)
|
|
|
|
#define XUSB_PADCTL_IOPHY_PLL_S0_CTL2 0x13C
|
|
#define XUSB_PADCTL_IOPHY_PLL_S0_CTL3 0x140
|
|
#define XUSB_PADCTL_IOPHY_PLL_S0_CTL4 0x144
|
|
|
|
#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1 0x148
|
|
#define IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD (1 << 1)
|
|
#define IOPHY_MISC_PAD_S0_CTL1_IDDQ (1 << 0)
|
|
|
|
#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL2 0x14C
|
|
#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL3 0x150
|
|
#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL4 0x154
|
|
#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL5 0x158
|
|
#define XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL6 0x15C
|
|
|
|
|
|
#define WR4(_sc, _r, _v) bus_write_4((_sc)->mem_res, (_r), (_v))
|
|
#define RD4(_sc, _r) bus_read_4((_sc)->mem_res, (_r))
|
|
|
|
|
|
struct padctl_softc {
|
|
device_t dev;
|
|
struct resource *mem_res;
|
|
hwreset_t rst;
|
|
int phy_ena_cnt;
|
|
|
|
/* Fuses calibration data */
|
|
uint32_t hs_curr_level_0;
|
|
uint32_t hs_curr_level_123;
|
|
uint32_t hs_iref_cap;
|
|
uint32_t hs_term_range_adj;
|
|
uint32_t hs_squelch_level;
|
|
|
|
uint32_t hs_curr_level_offset;
|
|
};
|
|
|
|
static struct ofw_compat_data compat_data[] = {
|
|
{"nvidia,tegra124-xusb-padctl", 1},
|
|
{NULL, 0},
|
|
};
|
|
|
|
/* Ports. */
|
|
enum padctl_port_type {
|
|
PADCTL_PORT_USB2,
|
|
PADCTL_PORT_ULPI,
|
|
PADCTL_PORT_HSIC,
|
|
PADCTL_PORT_USB3,
|
|
};
|
|
|
|
struct padctl_lane;
|
|
struct padctl_port {
|
|
enum padctl_port_type type;
|
|
const char *name;
|
|
const char *base_name;
|
|
int idx;
|
|
int (*init)(struct padctl_softc *sc,
|
|
struct padctl_port *port);
|
|
|
|
/* Runtime data. */
|
|
phandle_t xref;
|
|
bool enabled;
|
|
regulator_t supply_vbus; /* USB2, USB3 */
|
|
bool internal; /* ULPI, USB2, USB3 */
|
|
uint32_t companion; /* USB3 */
|
|
struct padctl_lane *lane;
|
|
};
|
|
|
|
static int usb3_port_init(struct padctl_softc *sc, struct padctl_port *port);
|
|
|
|
#define PORT(t, n, p, i) { \
|
|
.type = t, \
|
|
.name = n "-" #p, \
|
|
.base_name = n, \
|
|
.idx = p, \
|
|
.init = i, \
|
|
}
|
|
static struct padctl_port ports_tbl[] = {
|
|
PORT(PADCTL_PORT_USB2, "usb2", 0, NULL),
|
|
PORT(PADCTL_PORT_USB2, "usb2", 1, NULL),
|
|
PORT(PADCTL_PORT_USB2, "usb2", 2, NULL),
|
|
PORT(PADCTL_PORT_ULPI, "ulpi", 0, NULL),
|
|
PORT(PADCTL_PORT_HSIC, "hsic", 0, NULL),
|
|
PORT(PADCTL_PORT_HSIC, "hsic", 1, NULL),
|
|
PORT(PADCTL_PORT_USB3, "usb3", 0, usb3_port_init),
|
|
PORT(PADCTL_PORT_USB3, "usb3", 1, usb3_port_init),
|
|
};
|
|
|
|
/* Pads - a group of lannes. */
|
|
enum padctl_pad_type {
|
|
PADCTL_PAD_USB2,
|
|
PADCTL_PAD_ULPI,
|
|
PADCTL_PAD_HSIC,
|
|
PADCTL_PAD_PCIE,
|
|
PADCTL_PAD_SATA,
|
|
};
|
|
|
|
struct padctl_lane;
|
|
struct padctl_pad {
|
|
const char *name;
|
|
enum padctl_pad_type type;
|
|
int (*powerup)(struct padctl_softc *sc,
|
|
struct padctl_lane *lane);
|
|
int (*powerdown)(struct padctl_softc *sc,
|
|
struct padctl_lane *lane);
|
|
/* Runtime data. */
|
|
bool enabled;
|
|
struct padctl_lane *lanes[8]; /* Safe maximum value. */
|
|
int nlanes;
|
|
};
|
|
|
|
static int usb2_powerup(struct padctl_softc *sc, struct padctl_lane *lane);
|
|
static int usb2_powerdown(struct padctl_softc *sc, struct padctl_lane *lane);
|
|
static int pcie_powerup(struct padctl_softc *sc, struct padctl_lane *lane);
|
|
static int pcie_powerdown(struct padctl_softc *sc, struct padctl_lane *lane);
|
|
static int sata_powerup(struct padctl_softc *sc, struct padctl_lane *lane);
|
|
static int sata_powerdown(struct padctl_softc *sc, struct padctl_lane *lane);
|
|
|
|
#define PAD(n, t, u, d) { \
|
|
.name = n, \
|
|
.type = t, \
|
|
.powerup = u, \
|
|
.powerdown = d, \
|
|
}
|
|
static struct padctl_pad pads_tbl[] = {
|
|
PAD("usb2", PADCTL_PAD_USB2, usb2_powerup, usb2_powerdown),
|
|
PAD("ulpi", PADCTL_PAD_ULPI, NULL, NULL),
|
|
PAD("hsic", PADCTL_PAD_HSIC, NULL, NULL),
|
|
PAD("pcie", PADCTL_PAD_PCIE, pcie_powerup, pcie_powerdown),
|
|
PAD("sata", PADCTL_PAD_SATA, sata_powerup, sata_powerdown),
|
|
};
|
|
|
|
/* Lanes. */
|
|
static char *otg_mux[] = {"snps", "xusb", "uart", "rsvd"};
|
|
static char *usb_mux[] = {"snps", "xusb"};
|
|
static char *pci_mux[] = {"pcie", "usb3-ss", "sata", "rsvd"};
|
|
|
|
struct padctl_lane {
|
|
const char *name;
|
|
int idx;
|
|
bus_size_t reg;
|
|
uint32_t shift;
|
|
uint32_t mask;
|
|
char **mux;
|
|
int nmux;
|
|
/* Runtime data. */
|
|
bool enabled;
|
|
phandle_t xref;
|
|
struct padctl_pad *pad;
|
|
struct padctl_port *port;
|
|
int mux_idx;
|
|
|
|
};
|
|
|
|
#define LANE(n, p, r, s, m, mx) { \
|
|
.name = n "-" #p, \
|
|
.idx = p, \
|
|
.reg = r, \
|
|
.shift = s, \
|
|
.mask = m, \
|
|
.mux = mx, \
|
|
.nmux = nitems(mx), \
|
|
}
|
|
static struct padctl_lane lanes_tbl[] = {
|
|
LANE("usb2", 0, XUSB_PADCTL_USB2_PAD_MUX, 0, 0x3, otg_mux),
|
|
LANE("usb2", 1, XUSB_PADCTL_USB2_PAD_MUX, 2, 0x3, otg_mux),
|
|
LANE("usb2", 2, XUSB_PADCTL_USB2_PAD_MUX, 4, 0x3, otg_mux),
|
|
LANE("ulpi", 0, XUSB_PADCTL_USB2_PAD_MUX, 12, 0x1, usb_mux),
|
|
LANE("hsic", 0, XUSB_PADCTL_USB2_PAD_MUX, 14, 0x1, usb_mux),
|
|
LANE("hsic", 1, XUSB_PADCTL_USB2_PAD_MUX, 15, 0x1, usb_mux),
|
|
LANE("pcie", 0, XUSB_PADCTL_USB3_PAD_MUX, 16, 0x3, pci_mux),
|
|
LANE("pcie", 1, XUSB_PADCTL_USB3_PAD_MUX, 18, 0x3, pci_mux),
|
|
LANE("pcie", 2, XUSB_PADCTL_USB3_PAD_MUX, 20, 0x3, pci_mux),
|
|
LANE("pcie", 3, XUSB_PADCTL_USB3_PAD_MUX, 22, 0x3, pci_mux),
|
|
LANE("pcie", 4, XUSB_PADCTL_USB3_PAD_MUX, 24, 0x3, pci_mux),
|
|
LANE("sata", 0, XUSB_PADCTL_USB3_PAD_MUX, 26, 0x3, pci_mux),
|
|
};
|
|
|
|
/* Define all possible mappings for USB3 port lanes */
|
|
struct padctl_lane_map {
|
|
int port_idx;
|
|
enum padctl_pad_type pad_type;
|
|
int lane_idx;
|
|
};
|
|
|
|
#define LANE_MAP(pi, pt, li) { \
|
|
.port_idx = pi, \
|
|
.pad_type = pt, \
|
|
.lane_idx = li, \
|
|
}
|
|
static struct padctl_lane_map lane_map_tbl[] = {
|
|
LANE_MAP(0, PADCTL_PAD_PCIE, 0), /* port USB3-0 -> lane PCIE-0 */
|
|
LANE_MAP(1, PADCTL_PAD_PCIE, 1), /* port USB3-1 -> lane PCIE-1 */
|
|
/* -- or -- */
|
|
LANE_MAP(1, PADCTL_PAD_SATA, 0), /* port USB3-1 -> lane SATA-0 */
|
|
};
|
|
|
|
static struct padctl_port *search_lane_port(struct padctl_softc *sc,
|
|
struct padctl_lane *lane);
|
|
/* -------------------------------------------------------------------------
|
|
*
|
|
* PHY functions
|
|
*/
|
|
static int
|
|
usb3_port_init(struct padctl_softc *sc, struct padctl_port *port)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_SS_PORT_MAP);
|
|
if (port->internal)
|
|
reg &= ~SS_PORT_MAP_PORT_INTERNAL(port->idx);
|
|
else
|
|
reg |= SS_PORT_MAP_PORT_INTERNAL(port->idx);
|
|
reg &= ~SS_PORT_MAP_PORT_MAP(port->idx, ~0);
|
|
reg |= SS_PORT_MAP_PORT_MAP(port->idx, port->companion);
|
|
WR4(sc, XUSB_PADCTL_SS_PORT_MAP, reg);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_USB3_PAD_CTL2(port->idx));
|
|
reg &= ~IOPHY_USB3_PAD_CTL2_CDR_CNTL(~0);
|
|
reg &= ~IOPHY_USB3_PAD_CTL2_RX_EQ(~0);
|
|
reg &= ~IOPHY_USB3_PAD_CTL2_RX_WANDER(~0);
|
|
reg |= IOPHY_USB3_PAD_CTL2_CDR_CNTL(0x24);
|
|
reg |= IOPHY_USB3_PAD_CTL2_RX_EQ(0xF070);
|
|
reg |= IOPHY_USB3_PAD_CTL2_RX_WANDER(0xF);
|
|
WR4(sc, XUSB_PADCTL_IOPHY_USB3_PAD_CTL2(port->idx), reg);
|
|
|
|
WR4(sc, XUSB_PADCTL_IOPHY_USB3_PAD_CTL4(port->idx),
|
|
0x002008EE);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
|
|
reg &= ~ELPG_PROGRAM_SSP_ELPG_VCORE_DOWN(port->idx);
|
|
WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
|
|
DELAY(100);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
|
|
reg &= ~ELPG_PROGRAM_SSP_ELPG_CLAMP_EN_EARLY(port->idx);
|
|
WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
|
|
DELAY(100);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
|
|
reg &= ~ELPG_PROGRAM_SSP_ELPG_CLAMP_EN(port->idx);
|
|
WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
|
|
DELAY(100);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
pcie_powerup(struct padctl_softc *sc, struct padctl_lane *lane)
|
|
{
|
|
uint32_t reg;
|
|
int i;
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
|
|
reg &= ~IOPHY_PLL_P0_CTL1_REFCLK_SEL(~0);
|
|
WR4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1, reg);
|
|
DELAY(100);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL2);
|
|
reg |= IOPHY_PLL_P0_CTL2_REFCLKBUF_EN;
|
|
reg |= IOPHY_PLL_P0_CTL2_TXCLKREF_EN;
|
|
reg |= IOPHY_PLL_P0_CTL2_TXCLKREF_SEL;
|
|
WR4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL2, reg);
|
|
DELAY(100);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
|
|
reg |= IOPHY_PLL_P0_CTL1_PLL_RST;
|
|
WR4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1, reg);
|
|
DELAY(100);
|
|
|
|
for (i = 100; i > 0; i--) {
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
|
|
if (reg & IOPHY_PLL_P0_CTL1_PLL0_LOCKDET)
|
|
break;
|
|
DELAY(10);
|
|
}
|
|
if (i <= 0) {
|
|
device_printf(sc->dev, "Failed to power up PCIe phy\n");
|
|
return (ETIMEDOUT);
|
|
}
|
|
reg = RD4(sc, XUSB_PADCTL_USB3_PAD_MUX);
|
|
reg |= USB3_PAD_MUX_PCIE_IDDQ_DISABLE(lane->idx);
|
|
WR4(sc, XUSB_PADCTL_USB3_PAD_MUX, reg);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
pcie_powerdown(struct padctl_softc *sc, struct padctl_lane *lane)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_USB3_PAD_MUX);
|
|
reg &= ~USB3_PAD_MUX_PCIE_IDDQ_DISABLE(lane->idx);
|
|
WR4(sc, XUSB_PADCTL_USB3_PAD_MUX, reg);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1);
|
|
reg &= ~IOPHY_PLL_P0_CTL1_PLL_RST;
|
|
WR4(sc, XUSB_PADCTL_IOPHY_PLL_P0_CTL1, reg);
|
|
DELAY(100);
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
static int
|
|
sata_powerup(struct padctl_softc *sc, struct padctl_lane *lane)
|
|
{
|
|
uint32_t reg;
|
|
int i;
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
|
|
reg &= ~IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD;
|
|
reg &= ~IOPHY_MISC_PAD_S0_CTL1_IDDQ;
|
|
WR4(sc, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1, reg);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
|
|
reg &= ~IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD;
|
|
reg &= ~IOPHY_PLL_S0_CTL1_PLL_IDDQ;
|
|
WR4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1, reg);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
|
|
reg |= IOPHY_PLL_S0_CTL1_PLL1_MODE;
|
|
WR4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1, reg);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
|
|
reg |= IOPHY_PLL_S0_CTL1_PLL_RST_L;
|
|
WR4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1, reg);
|
|
|
|
for (i = 100; i >= 0; i--) {
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
|
|
if (reg & IOPHY_PLL_S0_CTL1_PLL1_LOCKDET)
|
|
break;
|
|
DELAY(100);
|
|
}
|
|
if (i <= 0) {
|
|
device_printf(sc->dev, "Failed to power up SATA phy\n");
|
|
return (ETIMEDOUT);
|
|
}
|
|
reg = RD4(sc, XUSB_PADCTL_USB3_PAD_MUX);
|
|
reg |= IOPHY_PLL_S0_CTL1_PLL_RST_L;
|
|
WR4(sc, XUSB_PADCTL_USB3_PAD_MUX, reg);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_USB3_PAD_MUX);
|
|
reg |= USB3_PAD_MUX_SATA_IDDQ_DISABLE;
|
|
WR4(sc, XUSB_PADCTL_USB3_PAD_MUX, reg);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sata_powerdown(struct padctl_softc *sc, struct padctl_lane *lane)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_USB3_PAD_MUX);
|
|
reg &= ~USB3_PAD_MUX_SATA_IDDQ_DISABLE;
|
|
WR4(sc, XUSB_PADCTL_USB3_PAD_MUX, reg);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
|
|
reg &= ~IOPHY_PLL_S0_CTL1_PLL_RST_L;
|
|
WR4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1, reg);
|
|
DELAY(100);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
|
|
reg &= ~IOPHY_PLL_S0_CTL1_PLL1_MODE;
|
|
WR4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1, reg);
|
|
DELAY(100);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1);
|
|
reg |= IOPHY_PLL_S0_CTL1_PLL_PWR_OVRD;
|
|
reg |= IOPHY_PLL_S0_CTL1_PLL_IDDQ;
|
|
WR4(sc, XUSB_PADCTL_IOPHY_PLL_S0_CTL1, reg);
|
|
DELAY(100);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1);
|
|
reg |= IOPHY_MISC_PAD_S0_CTL1_IDDQ_OVRD;
|
|
reg |= IOPHY_MISC_PAD_S0_CTL1_IDDQ;
|
|
WR4(sc, XUSB_PADCTL_IOPHY_MISC_PAD_S0_CTL1, reg);
|
|
DELAY(100);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
usb2_powerup(struct padctl_softc *sc, struct padctl_lane *lane)
|
|
{
|
|
uint32_t reg;
|
|
struct padctl_port *port;
|
|
int rv;
|
|
|
|
port = search_lane_port(sc, lane);
|
|
if (port == NULL) {
|
|
device_printf(sc->dev, "Cannot find port for lane: %s\n",
|
|
lane->name);
|
|
}
|
|
reg = RD4(sc, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
reg &= ~USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL(~0);
|
|
reg &= ~USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL(~0);
|
|
reg |= USB2_BIAS_PAD_CTL0_HS_SQUELCH_LEVEL(sc->hs_squelch_level);
|
|
reg |= USB2_BIAS_PAD_CTL0_HS_DISCON_LEVEL(5);
|
|
WR4(sc, XUSB_PADCTL_USB2_BIAS_PAD_CTL0, reg);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_USB2_PORT_CAP);
|
|
reg &= ~USB2_PORT_CAP_PORT_CAP(lane->idx, ~0);
|
|
reg |= USB2_PORT_CAP_PORT_CAP(lane->idx, USB2_PORT_CAP_PORT_CAP_HOST);
|
|
WR4(sc, XUSB_PADCTL_USB2_PORT_CAP, reg);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_USB2_OTG_PAD_CTL0(lane->idx));
|
|
reg &= ~USB2_OTG_PAD_CTL0_HS_CURR_LEVEL(~0);
|
|
reg &= ~USB2_OTG_PAD_CTL0_HS_SLEW(~0);
|
|
reg &= ~USB2_OTG_PAD_CTL0_LS_RSLEW(~0);
|
|
reg &= ~USB2_OTG_PAD_CTL0_PD;
|
|
reg &= ~USB2_OTG_PAD_CTL0_PD2;
|
|
reg &= ~USB2_OTG_PAD_CTL0_PD_ZI;
|
|
|
|
reg |= USB2_OTG_PAD_CTL0_HS_SLEW(14);
|
|
if (lane->idx == 0) {
|
|
reg |= USB2_OTG_PAD_CTL0_HS_CURR_LEVEL(sc->hs_curr_level_0);
|
|
reg |= USB2_OTG_PAD_CTL0_LS_RSLEW(3);
|
|
} else {
|
|
reg |= USB2_OTG_PAD_CTL0_HS_CURR_LEVEL(sc->hs_curr_level_123);
|
|
reg |= USB2_OTG_PAD_CTL0_LS_RSLEW(0);
|
|
}
|
|
WR4(sc, XUSB_PADCTL_USB2_OTG_PAD_CTL0(lane->idx), reg);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_USB2_OTG_PAD_CTL1(lane->idx));
|
|
reg &= ~USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ(~0);
|
|
reg &= ~USB2_OTG_PAD_CTL1_HS_IREF_CAP(~0);
|
|
reg &= ~USB2_OTG_PAD_CTL1_PD_DR;
|
|
reg &= ~USB2_OTG_PAD_CTL1_PD_DISC_FORCE_POWERUP;
|
|
reg &= ~USB2_OTG_PAD_CTL1_PD_CHRP_FORCE_POWERUP;
|
|
|
|
reg |= USB2_OTG_PAD_CTL1_TERM_RANGE_ADJ(sc->hs_term_range_adj);
|
|
reg |= USB2_OTG_PAD_CTL1_HS_IREF_CAP(sc->hs_iref_cap);
|
|
WR4(sc, XUSB_PADCTL_USB2_OTG_PAD_CTL1(lane->idx), reg);
|
|
|
|
if (port != NULL && port->supply_vbus != NULL) {
|
|
rv = regulator_enable(port->supply_vbus);
|
|
if (rv != 0) {
|
|
device_printf(sc->dev,
|
|
"Cannot enable vbus regulator\n");
|
|
return (rv);
|
|
}
|
|
}
|
|
reg = RD4(sc, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
reg &= ~USB2_BIAS_PAD_CTL0_PD;
|
|
WR4(sc, XUSB_PADCTL_USB2_BIAS_PAD_CTL0, reg);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
usb2_powerdown(struct padctl_softc *sc, struct padctl_lane *lane)
|
|
{
|
|
uint32_t reg;
|
|
struct padctl_port *port;
|
|
int rv;
|
|
|
|
port = search_lane_port(sc, lane);
|
|
if (port == NULL) {
|
|
device_printf(sc->dev, "Cannot find port for lane: %s\n",
|
|
lane->name);
|
|
}
|
|
reg = RD4(sc, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
|
|
reg |= USB2_BIAS_PAD_CTL0_PD;
|
|
WR4(sc, XUSB_PADCTL_USB2_BIAS_PAD_CTL0, reg);
|
|
|
|
if (port != NULL && port->supply_vbus != NULL) {
|
|
rv = regulator_enable(port->supply_vbus);
|
|
if (rv != 0) {
|
|
device_printf(sc->dev,
|
|
"Cannot disable vbus regulator\n");
|
|
return (rv);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
|
|
static int
|
|
phy_powerup(struct padctl_softc *sc)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
|
|
reg &= ~ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN;
|
|
WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
|
|
DELAY(100);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
|
|
reg &= ~ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN;
|
|
WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
|
|
DELAY(100);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
|
|
reg &= ~ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY;
|
|
WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
|
|
DELAY(100);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
phy_powerdown(struct padctl_softc *sc)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
|
|
reg |= ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN_EARLY;
|
|
WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
|
|
DELAY(100);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
|
|
reg |= ELPG_PROGRAM_AUX_MUX_LP0_CLAMP_EN;
|
|
WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
|
|
DELAY(100);
|
|
|
|
reg = RD4(sc, XUSB_PADCTL_ELPG_PROGRAM);
|
|
reg |= ELPG_PROGRAM_AUX_MUX_LP0_VCORE_DOWN;
|
|
WR4(sc, XUSB_PADCTL_ELPG_PROGRAM, reg);
|
|
DELAY(100);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
xusbpadctl_phy_enable(device_t dev, intptr_t id, bool enable)
|
|
{
|
|
struct padctl_softc *sc;
|
|
struct padctl_lane *lane;
|
|
struct padctl_pad *pad;
|
|
int rv;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (id < 0 || id >= nitems(lanes_tbl)) {
|
|
device_printf(dev, "Unknown phy: %d\n", id);
|
|
return (ENXIO);
|
|
}
|
|
lane = lanes_tbl + id;
|
|
if (!lane->enabled) {
|
|
device_printf(dev, "Lane is not enabled/configured: %s\n",
|
|
lane->name);
|
|
return (ENXIO);
|
|
}
|
|
pad = lane->pad;
|
|
if (enable) {
|
|
if (sc->phy_ena_cnt == 0) {
|
|
rv = phy_powerup(sc);
|
|
if (rv != 0)
|
|
return (rv);
|
|
}
|
|
sc->phy_ena_cnt++;
|
|
}
|
|
|
|
if (enable)
|
|
rv = pad->powerup(sc, lane);
|
|
else
|
|
rv = pad->powerdown(sc, lane);
|
|
if (rv != 0)
|
|
return (rv);
|
|
|
|
if (!enable) {
|
|
if (sc->phy_ena_cnt == 1) {
|
|
rv = phy_powerdown(sc);
|
|
if (rv != 0)
|
|
return (rv);
|
|
}
|
|
sc->phy_ena_cnt--;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
xusbpadctl_phy_map(device_t provider, phandle_t xref, int ncells,
|
|
pcell_t *cells, intptr_t *id)
|
|
{
|
|
int i;
|
|
|
|
if (ncells != 0)
|
|
return (ERANGE);
|
|
|
|
for (i = 0; i < nitems(lanes_tbl); i++) {
|
|
if (lanes_tbl[i].xref == xref) {
|
|
*id = i;
|
|
return (0);
|
|
}
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* -------------------------------------------------------------------------
|
|
*
|
|
* FDT processing
|
|
*/
|
|
static struct padctl_port *
|
|
search_port(struct padctl_softc *sc, char *port_name)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nitems(ports_tbl); i++) {
|
|
if (strcmp(port_name, ports_tbl[i].name) == 0)
|
|
return (&ports_tbl[i]);
|
|
}
|
|
return (NULL);
|
|
}
|
|
|
|
static struct padctl_port *
|
|
search_lane_port(struct padctl_softc *sc, struct padctl_lane *lane)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nitems(ports_tbl); i++) {
|
|
if (!ports_tbl[i].enabled)
|
|
continue;
|
|
if (ports_tbl[i].lane == lane)
|
|
return (ports_tbl + i);
|
|
}
|
|
return (NULL);
|
|
}
|
|
|
|
static struct padctl_lane *
|
|
search_lane(struct padctl_softc *sc, char *lane_name)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nitems(lanes_tbl); i++) {
|
|
if (strcmp(lane_name, lanes_tbl[i].name) == 0)
|
|
return (lanes_tbl + i);
|
|
}
|
|
return (NULL);
|
|
}
|
|
|
|
static struct padctl_lane *
|
|
search_pad_lane(struct padctl_softc *sc, enum padctl_pad_type type, int idx)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nitems(lanes_tbl); i++) {
|
|
if (!lanes_tbl[i].enabled)
|
|
continue;
|
|
if (type == lanes_tbl[i].pad->type && idx == lanes_tbl[i].idx)
|
|
return (lanes_tbl + i);
|
|
}
|
|
return (NULL);
|
|
}
|
|
|
|
static struct padctl_lane *
|
|
search_usb3_pad_lane(struct padctl_softc *sc, int idx)
|
|
{
|
|
int i;
|
|
struct padctl_lane *lane, *tmp;
|
|
|
|
lane = NULL;
|
|
for (i = 0; i < nitems(lane_map_tbl); i++) {
|
|
if (idx != lane_map_tbl[i].port_idx)
|
|
continue;
|
|
tmp = search_pad_lane(sc, lane_map_tbl[i].pad_type,
|
|
lane_map_tbl[i].lane_idx);
|
|
if (tmp == NULL)
|
|
continue;
|
|
if (strcmp(tmp->mux[tmp->mux_idx], "usb3-ss") != 0)
|
|
continue;
|
|
if (lane != NULL) {
|
|
device_printf(sc->dev, "Duplicated mappings found for"
|
|
" lanes: %s and %s\n", lane->name, tmp->name);
|
|
return (NULL);
|
|
}
|
|
lane = tmp;
|
|
}
|
|
return (lane);
|
|
}
|
|
|
|
static struct padctl_pad *
|
|
search_pad(struct padctl_softc *sc, char *pad_name)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nitems(pads_tbl); i++) {
|
|
if (strcmp(pad_name, pads_tbl[i].name) == 0)
|
|
return (pads_tbl + i);
|
|
}
|
|
return (NULL);
|
|
}
|
|
|
|
static int
|
|
search_mux(struct padctl_softc *sc, struct padctl_lane *lane, char *fnc_name)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < lane->nmux; i++) {
|
|
if (strcmp(fnc_name, lane->mux[i]) == 0)
|
|
return (i);
|
|
}
|
|
return (-1);
|
|
}
|
|
|
|
static int
|
|
config_lane(struct padctl_softc *sc, struct padctl_lane *lane)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = RD4(sc, lane->reg);
|
|
reg &= ~(lane->mask << lane->shift);
|
|
reg |= (lane->mux_idx & lane->mask) << lane->shift;
|
|
WR4(sc, lane->reg, reg);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
process_lane(struct padctl_softc *sc, phandle_t node, struct padctl_pad *pad)
|
|
{
|
|
struct padctl_lane *lane;
|
|
char *name;
|
|
char *function;
|
|
int rv;
|
|
|
|
name = NULL;
|
|
function = NULL;
|
|
rv = OF_getprop_alloc(node, "name", 1, (void **)&name);
|
|
if (rv <= 0) {
|
|
device_printf(sc->dev, "Cannot read lane name.\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
lane = search_lane(sc, name);
|
|
if (lane == NULL) {
|
|
device_printf(sc->dev, "Unknown lane: %s\n", name);
|
|
rv = ENXIO;
|
|
goto end;
|
|
}
|
|
|
|
/* Read function (mux) settings. */
|
|
rv = OF_getprop_alloc(node, "nvidia,function", 1, (void **)&function);
|
|
if (rv <= 0) {
|
|
device_printf(sc->dev, "Cannot read lane function.\n");
|
|
rv = ENXIO;
|
|
goto end;
|
|
}
|
|
|
|
lane->mux_idx = search_mux(sc, lane, function);
|
|
if (lane->mux_idx == ~0) {
|
|
device_printf(sc->dev, "Unknown function %s for lane %s\n",
|
|
function, name);
|
|
rv = ENXIO;
|
|
goto end;
|
|
}
|
|
|
|
rv = config_lane(sc, lane);
|
|
if (rv != 0) {
|
|
device_printf(sc->dev, "Cannot configure lane: %s: %d\n",
|
|
name, rv);
|
|
rv = ENXIO;
|
|
goto end;
|
|
}
|
|
lane->xref = OF_xref_from_node(node);
|
|
lane->pad = pad;
|
|
lane->enabled = true;
|
|
pad->lanes[pad->nlanes++] = lane;
|
|
rv = 0;
|
|
|
|
end:
|
|
if (name != NULL)
|
|
OF_prop_free(name);
|
|
if (function != NULL)
|
|
OF_prop_free(function);
|
|
return (rv);
|
|
}
|
|
|
|
static int
|
|
process_pad(struct padctl_softc *sc, phandle_t node)
|
|
{
|
|
phandle_t xref;
|
|
struct padctl_pad *pad;
|
|
char *name;
|
|
int rv;
|
|
|
|
name = NULL;
|
|
rv = OF_getprop_alloc(node, "name", 1, (void **)&name);
|
|
if (rv <= 0) {
|
|
device_printf(sc->dev, "Cannot read pad name.\n");
|
|
return (ENXIO);
|
|
}
|
|
pad = search_pad(sc, name);
|
|
if (pad == NULL) {
|
|
device_printf(sc->dev, "Unknown pad: %s\n", name);
|
|
rv = ENXIO;
|
|
goto end;
|
|
}
|
|
|
|
/* Read and process associated lanes. */
|
|
node = ofw_bus_find_child(node, "lanes");
|
|
if (node <= 0) {
|
|
device_printf(sc->dev, "Cannot find regulators subnode\n");
|
|
rv = ENXIO;
|
|
goto end;
|
|
}
|
|
|
|
for (node = OF_child(node); node != 0; node = OF_peer(node)) {
|
|
if (!fdt_is_enabled(node))
|
|
continue;
|
|
|
|
rv = process_lane(sc, node, pad);
|
|
if (rv != 0)
|
|
goto end;
|
|
|
|
xref = OF_xref_from_node(node);
|
|
OF_device_register_xref(xref, sc->dev);
|
|
}
|
|
pad->enabled = true;
|
|
rv = 0;
|
|
end:
|
|
if (name != NULL)
|
|
OF_prop_free(name);
|
|
return (rv);
|
|
}
|
|
|
|
static int
|
|
process_port(struct padctl_softc *sc, phandle_t node)
|
|
{
|
|
|
|
struct padctl_port *port;
|
|
char *name;
|
|
int rv;
|
|
|
|
name = NULL;
|
|
rv = OF_getprop_alloc(node, "name", 1, (void **)&name);
|
|
if (rv <= 0) {
|
|
device_printf(sc->dev, "Cannot read port name.\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
port = search_port(sc, name);
|
|
if (port == NULL) {
|
|
device_printf(sc->dev, "Unknown port: %s\n", name);
|
|
rv = ENXIO;
|
|
goto end;
|
|
}
|
|
|
|
if (port->type == PADCTL_PORT_USB3) {
|
|
rv = OF_getencprop(node, "nvidia,usb2-companion",
|
|
&(port->companion), sizeof(port->companion));
|
|
if (rv <= 0) {
|
|
device_printf(sc->dev,
|
|
"Missing 'nvidia,usb2-companion' property "
|
|
"for port: %s\n", name);
|
|
rv = ENXIO;
|
|
goto end;
|
|
}
|
|
}
|
|
|
|
if (OF_hasprop(node, "vbus-supply")) {
|
|
rv = regulator_get_by_ofw_property(sc->dev, 0,
|
|
"vbus-supply", &port->supply_vbus);
|
|
if (rv <= 0) {
|
|
device_printf(sc->dev,
|
|
"Cannot get 'vbus-supply' regulator "
|
|
"for port: %s\n", name);
|
|
rv = ENXIO;
|
|
goto end;
|
|
}
|
|
}
|
|
|
|
if (OF_hasprop(node, "nvidia,internal"))
|
|
port->internal = true;
|
|
/* Find assigned lane */
|
|
if (port->lane == NULL) {
|
|
switch(port->type) {
|
|
/* Routing is fixed for USB2, ULPI AND HSIC. */
|
|
case PADCTL_PORT_USB2:
|
|
port->lane = search_pad_lane(sc, PADCTL_PAD_USB2,
|
|
port->idx);
|
|
break;
|
|
case PADCTL_PORT_ULPI:
|
|
port->lane = search_pad_lane(sc, PADCTL_PAD_ULPI,
|
|
port->idx);
|
|
break;
|
|
case PADCTL_PORT_HSIC:
|
|
port->lane = search_pad_lane(sc, PADCTL_PAD_HSIC,
|
|
port->idx);
|
|
break;
|
|
case PADCTL_PORT_USB3:
|
|
port->lane = search_usb3_pad_lane(sc, port->idx);
|
|
break;
|
|
}
|
|
}
|
|
if (port->lane == NULL) {
|
|
device_printf(sc->dev, "Cannot find lane for port: %s\n", name);
|
|
rv = ENXIO;
|
|
goto end;
|
|
}
|
|
port->enabled = true;
|
|
rv = 0;
|
|
end:
|
|
if (name != NULL)
|
|
OF_prop_free(name);
|
|
return (rv);
|
|
}
|
|
|
|
static int
|
|
parse_fdt(struct padctl_softc *sc, phandle_t base_node)
|
|
{
|
|
phandle_t node;
|
|
int rv;
|
|
|
|
rv = 0;
|
|
node = ofw_bus_find_child(base_node, "pads");
|
|
|
|
if (node <= 0) {
|
|
device_printf(sc->dev, "Cannot find pads subnode.\n");
|
|
return (ENXIO);
|
|
}
|
|
for (node = OF_child(node); node != 0; node = OF_peer(node)) {
|
|
if (!fdt_is_enabled(node))
|
|
continue;
|
|
rv = process_pad(sc, node);
|
|
if (rv != 0)
|
|
return (rv);
|
|
}
|
|
|
|
node = ofw_bus_find_child(base_node, "ports");
|
|
if (node <= 0) {
|
|
device_printf(sc->dev, "Cannot find ports subnode.\n");
|
|
return (ENXIO);
|
|
}
|
|
for (node = OF_child(node); node != 0; node = OF_peer(node)) {
|
|
if (!fdt_is_enabled(node))
|
|
continue;
|
|
rv = process_port(sc, node);
|
|
if (rv != 0)
|
|
return (rv);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
load_calibration(struct padctl_softc *sc)
|
|
{
|
|
uint32_t reg;
|
|
|
|
/* All XUSB pad calibrations are packed into single dword.*/
|
|
reg = tegra_fuse_read_4(FUSE_XUSB_CALIB);
|
|
sc->hs_curr_level_0 = FUSE_XUSB_CALIB_HS_CURR_LEVEL_0(reg);
|
|
sc->hs_curr_level_123 = FUSE_XUSB_CALIB_HS_CURR_LEVEL_123(reg);
|
|
sc->hs_iref_cap = FUSE_XUSB_CALIB_HS_IREF_CAP(reg);
|
|
sc->hs_squelch_level = FUSE_XUSB_CALIB_HS_SQUELCH_LEVEL(reg);
|
|
sc->hs_term_range_adj = FUSE_XUSB_CALIB_HS_TERM_RANGE_ADJ(reg);
|
|
}
|
|
|
|
/* -------------------------------------------------------------------------
|
|
*
|
|
* BUS functions
|
|
*/
|
|
static int
|
|
xusbpadctl_probe(device_t dev)
|
|
{
|
|
|
|
if (!ofw_bus_status_okay(dev))
|
|
return (ENXIO);
|
|
|
|
if (!ofw_bus_search_compatible(dev, compat_data)->ocd_data)
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "Tegra XUSB phy");
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static int
|
|
xusbpadctl_detach(device_t dev)
|
|
{
|
|
|
|
/* This device is always present. */
|
|
return (EBUSY);
|
|
}
|
|
|
|
static int
|
|
xusbpadctl_attach(device_t dev)
|
|
{
|
|
struct padctl_softc * sc;
|
|
int i, rid, rv;
|
|
struct padctl_port *port;
|
|
phandle_t node;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->dev = dev;
|
|
node = ofw_bus_get_node(dev);
|
|
|
|
rid = 0;
|
|
sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
if (sc->mem_res == NULL) {
|
|
device_printf(dev, "Cannot allocate memory resources\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
rv = hwreset_get_by_ofw_name(dev, 0, "padctl", &sc->rst);
|
|
if (rv != 0) {
|
|
device_printf(dev, "Cannot get 'padctl' reset: %d\n", rv);
|
|
return (rv);
|
|
}
|
|
rv = hwreset_deassert(sc->rst);
|
|
if (rv != 0) {
|
|
device_printf(dev, "Cannot unreset 'padctl' reset: %d\n", rv);
|
|
return (rv);
|
|
}
|
|
|
|
load_calibration(sc);
|
|
|
|
rv = parse_fdt(sc, node);
|
|
if (rv != 0) {
|
|
device_printf(dev, "Cannot parse fdt configuration: %d\n", rv);
|
|
return (rv);
|
|
}
|
|
for (i = 0; i < nitems(ports_tbl); i++) {
|
|
port = ports_tbl + i;
|
|
if (!port->enabled)
|
|
continue;
|
|
if (port->init == NULL)
|
|
continue;
|
|
rv = port->init(sc, port);
|
|
if (rv != 0) {
|
|
device_printf(dev, "Cannot init port '%s'\n",
|
|
port->name);
|
|
return (rv);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t tegra_xusbpadctl_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, xusbpadctl_probe),
|
|
DEVMETHOD(device_attach, xusbpadctl_attach),
|
|
DEVMETHOD(device_detach, xusbpadctl_detach),
|
|
|
|
/* phy interface */
|
|
DEVMETHOD(phy_enable, xusbpadctl_phy_enable),
|
|
DEVMETHOD(phy_map, xusbpadctl_phy_map),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static devclass_t tegra_xusbpadctl_devclass;
|
|
static DEFINE_CLASS_0(xusbpadctl, tegra_xusbpadctl_driver,
|
|
tegra_xusbpadctl_methods, sizeof(struct padctl_softc));
|
|
EARLY_DRIVER_MODULE(tegra_xusbpadctl, simplebus, tegra_xusbpadctl_driver,
|
|
tegra_xusbpadctl_devclass, NULL, NULL, 73);
|