4f49ef4382
While there, try to make the register write pattern look like what's done by ath9k. MFC after: 3 days
885 lines
34 KiB
C
885 lines
34 KiB
C
/*
|
|
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
|
|
* Copyright (c) 2002-2008 Atheros Communications, Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _ATH_AH_H_
|
|
#define _ATH_AH_H_
|
|
/*
|
|
* Atheros Hardware Access Layer
|
|
*
|
|
* Clients of the HAL call ath_hal_attach to obtain a reference to an ath_hal
|
|
* structure for use with the device. Hardware-related operations that
|
|
* follow must call back into the HAL through interface, supplying the
|
|
* reference as the first parameter.
|
|
*/
|
|
|
|
#include "ah_osdep.h"
|
|
|
|
/*
|
|
* __ahdecl is analogous to _cdecl; it defines the calling
|
|
* convention used within the HAL. For most systems this
|
|
* can just default to be empty and the compiler will (should)
|
|
* use _cdecl. For systems where _cdecl is not compatible this
|
|
* must be defined. See linux/ah_osdep.h for an example.
|
|
*/
|
|
#ifndef __ahdecl
|
|
#define __ahdecl
|
|
#endif
|
|
|
|
/*
|
|
* Status codes that may be returned by the HAL. Note that
|
|
* interfaces that return a status code set it only when an
|
|
* error occurs--i.e. you cannot check it for success.
|
|
*/
|
|
typedef enum {
|
|
HAL_OK = 0, /* No error */
|
|
HAL_ENXIO = 1, /* No hardware present */
|
|
HAL_ENOMEM = 2, /* Memory allocation failed */
|
|
HAL_EIO = 3, /* Hardware didn't respond as expected */
|
|
HAL_EEMAGIC = 4, /* EEPROM magic number invalid */
|
|
HAL_EEVERSION = 5, /* EEPROM version invalid */
|
|
HAL_EELOCKED = 6, /* EEPROM unreadable */
|
|
HAL_EEBADSUM = 7, /* EEPROM checksum invalid */
|
|
HAL_EEREAD = 8, /* EEPROM read problem */
|
|
HAL_EEBADMAC = 9, /* EEPROM mac address invalid */
|
|
HAL_EESIZE = 10, /* EEPROM size not supported */
|
|
HAL_EEWRITE = 11, /* Attempt to change write-locked EEPROM */
|
|
HAL_EINVAL = 12, /* Invalid parameter to function */
|
|
HAL_ENOTSUPP = 13, /* Hardware revision not supported */
|
|
HAL_ESELFTEST = 14, /* Hardware self-test failed */
|
|
HAL_EINPROGRESS = 15, /* Operation incomplete */
|
|
HAL_EEBADREG = 16, /* EEPROM invalid regulatory contents */
|
|
HAL_EEBADCC = 17, /* EEPROM invalid country code */
|
|
} HAL_STATUS;
|
|
|
|
typedef enum {
|
|
AH_FALSE = 0, /* NB: lots of code assumes false is zero */
|
|
AH_TRUE = 1,
|
|
} HAL_BOOL;
|
|
|
|
typedef enum {
|
|
HAL_CAP_REG_DMN = 0, /* current regulatory domain */
|
|
HAL_CAP_CIPHER = 1, /* hardware supports cipher */
|
|
HAL_CAP_TKIP_MIC = 2, /* handle TKIP MIC in hardware */
|
|
HAL_CAP_TKIP_SPLIT = 3, /* hardware TKIP uses split keys */
|
|
HAL_CAP_PHYCOUNTERS = 4, /* hardware PHY error counters */
|
|
HAL_CAP_DIVERSITY = 5, /* hardware supports fast diversity */
|
|
HAL_CAP_KEYCACHE_SIZE = 6, /* number of entries in key cache */
|
|
HAL_CAP_NUM_TXQUEUES = 7, /* number of hardware xmit queues */
|
|
HAL_CAP_VEOL = 9, /* hardware supports virtual EOL */
|
|
HAL_CAP_PSPOLL = 10, /* hardware has working PS-Poll support */
|
|
HAL_CAP_DIAG = 11, /* hardware diagnostic support */
|
|
HAL_CAP_COMPRESSION = 12, /* hardware supports compression */
|
|
HAL_CAP_BURST = 13, /* hardware supports packet bursting */
|
|
HAL_CAP_FASTFRAME = 14, /* hardware supoprts fast frames */
|
|
HAL_CAP_TXPOW = 15, /* global tx power limit */
|
|
HAL_CAP_TPC = 16, /* per-packet tx power control */
|
|
HAL_CAP_PHYDIAG = 17, /* hardware phy error diagnostic */
|
|
HAL_CAP_BSSIDMASK = 18, /* hardware supports bssid mask */
|
|
HAL_CAP_MCAST_KEYSRCH = 19, /* hardware has multicast key search */
|
|
HAL_CAP_TSF_ADJUST = 20, /* hardware has beacon tsf adjust */
|
|
/* 21 was HAL_CAP_XR */
|
|
HAL_CAP_WME_TKIPMIC = 22, /* hardware can support TKIP MIC when WMM is turned on */
|
|
/* 23 was HAL_CAP_CHAN_HALFRATE */
|
|
/* 24 was HAL_CAP_CHAN_QUARTERRATE */
|
|
HAL_CAP_RFSILENT = 25, /* hardware has rfsilent support */
|
|
HAL_CAP_TPC_ACK = 26, /* ack txpower with per-packet tpc */
|
|
HAL_CAP_TPC_CTS = 27, /* cts txpower with per-packet tpc */
|
|
HAL_CAP_11D = 28, /* 11d beacon support for changing cc */
|
|
HAL_CAP_INTMIT = 29, /* interference mitigation */
|
|
HAL_CAP_RXORN_FATAL = 30, /* HAL_INT_RXORN treated as fatal */
|
|
HAL_CAP_HT = 31, /* hardware can support HT */
|
|
HAL_CAP_TX_CHAINMASK = 32, /* mask of TX chains supported */
|
|
HAL_CAP_RX_CHAINMASK = 33, /* mask of RX chains supported */
|
|
HAL_CAP_RXTSTAMP_PREC = 34, /* rx desc tstamp precision (bits) */
|
|
HAL_CAP_BB_HANG = 35, /* can baseband hang */
|
|
HAL_CAP_MAC_HANG = 36, /* can MAC hang */
|
|
HAL_CAP_INTRMASK = 37, /* bitmask of supported interrupts */
|
|
HAL_CAP_BSSIDMATCH = 38, /* hardware has disable bssid match */
|
|
} HAL_CAPABILITY_TYPE;
|
|
|
|
/*
|
|
* "States" for setting the LED. These correspond to
|
|
* the possible 802.11 operational states and there may
|
|
* be a many-to-one mapping between these states and the
|
|
* actual hardware state for the LED's (i.e. the hardware
|
|
* may have fewer states).
|
|
*/
|
|
typedef enum {
|
|
HAL_LED_INIT = 0,
|
|
HAL_LED_SCAN = 1,
|
|
HAL_LED_AUTH = 2,
|
|
HAL_LED_ASSOC = 3,
|
|
HAL_LED_RUN = 4
|
|
} HAL_LED_STATE;
|
|
|
|
/*
|
|
* Transmit queue types/numbers. These are used to tag
|
|
* each transmit queue in the hardware and to identify a set
|
|
* of transmit queues for operations such as start/stop dma.
|
|
*/
|
|
typedef enum {
|
|
HAL_TX_QUEUE_INACTIVE = 0, /* queue is inactive/unused */
|
|
HAL_TX_QUEUE_DATA = 1, /* data xmit q's */
|
|
HAL_TX_QUEUE_BEACON = 2, /* beacon xmit q */
|
|
HAL_TX_QUEUE_CAB = 3, /* "crap after beacon" xmit q */
|
|
HAL_TX_QUEUE_UAPSD = 4, /* u-apsd power save xmit q */
|
|
} HAL_TX_QUEUE;
|
|
|
|
#define HAL_NUM_TX_QUEUES 10 /* max possible # of queues */
|
|
|
|
/*
|
|
* Transmit queue subtype. These map directly to
|
|
* WME Access Categories (except for UPSD). Refer
|
|
* to Table 5 of the WME spec.
|
|
*/
|
|
typedef enum {
|
|
HAL_WME_AC_BK = 0, /* background access category */
|
|
HAL_WME_AC_BE = 1, /* best effort access category*/
|
|
HAL_WME_AC_VI = 2, /* video access category */
|
|
HAL_WME_AC_VO = 3, /* voice access category */
|
|
HAL_WME_UPSD = 4, /* uplink power save */
|
|
} HAL_TX_QUEUE_SUBTYPE;
|
|
|
|
/*
|
|
* Transmit queue flags that control various
|
|
* operational parameters.
|
|
*/
|
|
typedef enum {
|
|
/*
|
|
* Per queue interrupt enables. When set the associated
|
|
* interrupt may be delivered for packets sent through
|
|
* the queue. Without these enabled no interrupts will
|
|
* be delivered for transmits through the queue.
|
|
*/
|
|
HAL_TXQ_TXOKINT_ENABLE = 0x0001, /* enable TXOK interrupt */
|
|
HAL_TXQ_TXERRINT_ENABLE = 0x0001, /* enable TXERR interrupt */
|
|
HAL_TXQ_TXDESCINT_ENABLE = 0x0002, /* enable TXDESC interrupt */
|
|
HAL_TXQ_TXEOLINT_ENABLE = 0x0004, /* enable TXEOL interrupt */
|
|
HAL_TXQ_TXURNINT_ENABLE = 0x0008, /* enable TXURN interrupt */
|
|
/*
|
|
* Enable hardware compression for packets sent through
|
|
* the queue. The compression buffer must be setup and
|
|
* packets must have a key entry marked in the tx descriptor.
|
|
*/
|
|
HAL_TXQ_COMPRESSION_ENABLE = 0x0010, /* enable h/w compression */
|
|
/*
|
|
* Disable queue when veol is hit or ready time expires.
|
|
* By default the queue is disabled only on reaching the
|
|
* physical end of queue (i.e. a null link ptr in the
|
|
* descriptor chain).
|
|
*/
|
|
HAL_TXQ_RDYTIME_EXP_POLICY_ENABLE = 0x0020,
|
|
/*
|
|
* Schedule frames on delivery of a DBA (DMA Beacon Alert)
|
|
* event. Frames will be transmitted only when this timer
|
|
* fires, e.g to transmit a beacon in ap or adhoc modes.
|
|
*/
|
|
HAL_TXQ_DBA_GATED = 0x0040, /* schedule based on DBA */
|
|
/*
|
|
* Each transmit queue has a counter that is incremented
|
|
* each time the queue is enabled and decremented when
|
|
* the list of frames to transmit is traversed (or when
|
|
* the ready time for the queue expires). This counter
|
|
* must be non-zero for frames to be scheduled for
|
|
* transmission. The following controls disable bumping
|
|
* this counter under certain conditions. Typically this
|
|
* is used to gate frames based on the contents of another
|
|
* queue (e.g. CAB traffic may only follow a beacon frame).
|
|
* These are meaningful only when frames are scheduled
|
|
* with a non-ASAP policy (e.g. DBA-gated).
|
|
*/
|
|
HAL_TXQ_CBR_DIS_QEMPTY = 0x0080, /* disable on this q empty */
|
|
HAL_TXQ_CBR_DIS_BEMPTY = 0x0100, /* disable on beacon q empty */
|
|
|
|
/*
|
|
* Fragment burst backoff policy. Normally the no backoff
|
|
* is done after a successful transmission, the next fragment
|
|
* is sent at SIFS. If this flag is set backoff is done
|
|
* after each fragment, regardless whether it was ack'd or
|
|
* not, after the backoff count reaches zero a normal channel
|
|
* access procedure is done before the next transmit (i.e.
|
|
* wait AIFS instead of SIFS).
|
|
*/
|
|
HAL_TXQ_FRAG_BURST_BACKOFF_ENABLE = 0x00800000,
|
|
/*
|
|
* Disable post-tx backoff following each frame.
|
|
*/
|
|
HAL_TXQ_BACKOFF_DISABLE = 0x00010000, /* disable post backoff */
|
|
/*
|
|
* DCU arbiter lockout control. This controls how
|
|
* lower priority tx queues are handled with respect to
|
|
* to a specific queue when multiple queues have frames
|
|
* to send. No lockout means lower priority queues arbitrate
|
|
* concurrently with this queue. Intra-frame lockout
|
|
* means lower priority queues are locked out until the
|
|
* current frame transmits (e.g. including backoffs and bursting).
|
|
* Global lockout means nothing lower can arbitrary so
|
|
* long as there is traffic activity on this queue (frames,
|
|
* backoff, etc).
|
|
*/
|
|
HAL_TXQ_ARB_LOCKOUT_INTRA = 0x00020000, /* intra-frame lockout */
|
|
HAL_TXQ_ARB_LOCKOUT_GLOBAL = 0x00040000, /* full lockout s */
|
|
|
|
HAL_TXQ_IGNORE_VIRTCOL = 0x00080000, /* ignore virt collisions */
|
|
HAL_TXQ_SEQNUM_INC_DIS = 0x00100000, /* disable seqnum increment */
|
|
} HAL_TX_QUEUE_FLAGS;
|
|
|
|
typedef struct {
|
|
uint32_t tqi_ver; /* hal TXQ version */
|
|
HAL_TX_QUEUE_SUBTYPE tqi_subtype; /* subtype if applicable */
|
|
HAL_TX_QUEUE_FLAGS tqi_qflags; /* flags (see above) */
|
|
uint32_t tqi_priority; /* (not used) */
|
|
uint32_t tqi_aifs; /* aifs */
|
|
uint32_t tqi_cwmin; /* cwMin */
|
|
uint32_t tqi_cwmax; /* cwMax */
|
|
uint16_t tqi_shretry; /* rts retry limit */
|
|
uint16_t tqi_lgretry; /* long retry limit (not used)*/
|
|
uint32_t tqi_cbrPeriod; /* CBR period (us) */
|
|
uint32_t tqi_cbrOverflowLimit; /* threshold for CBROVF int */
|
|
uint32_t tqi_burstTime; /* max burst duration (us) */
|
|
uint32_t tqi_readyTime; /* frame schedule time (us) */
|
|
uint32_t tqi_compBuf; /* comp buffer phys addr */
|
|
} HAL_TXQ_INFO;
|
|
|
|
#define HAL_TQI_NONVAL 0xffff
|
|
|
|
/* token to use for aifs, cwmin, cwmax */
|
|
#define HAL_TXQ_USEDEFAULT ((uint32_t) -1)
|
|
|
|
/* compression definitions */
|
|
#define HAL_COMP_BUF_MAX_SIZE 9216 /* 9K */
|
|
#define HAL_COMP_BUF_ALIGN_SIZE 512
|
|
|
|
/*
|
|
* Transmit packet types. This belongs in ah_desc.h, but
|
|
* is here so we can give a proper type to various parameters
|
|
* (and not require everyone include the file).
|
|
*
|
|
* NB: These values are intentionally assigned for
|
|
* direct use when setting up h/w descriptors.
|
|
*/
|
|
typedef enum {
|
|
HAL_PKT_TYPE_NORMAL = 0,
|
|
HAL_PKT_TYPE_ATIM = 1,
|
|
HAL_PKT_TYPE_PSPOLL = 2,
|
|
HAL_PKT_TYPE_BEACON = 3,
|
|
HAL_PKT_TYPE_PROBE_RESP = 4,
|
|
HAL_PKT_TYPE_CHIRP = 5,
|
|
HAL_PKT_TYPE_GRP_POLL = 6,
|
|
HAL_PKT_TYPE_AMPDU = 7,
|
|
} HAL_PKT_TYPE;
|
|
|
|
/* Rx Filter Frame Types */
|
|
typedef enum {
|
|
HAL_RX_FILTER_UCAST = 0x00000001, /* Allow unicast frames */
|
|
HAL_RX_FILTER_MCAST = 0x00000002, /* Allow multicast frames */
|
|
HAL_RX_FILTER_BCAST = 0x00000004, /* Allow broadcast frames */
|
|
HAL_RX_FILTER_CONTROL = 0x00000008, /* Allow control frames */
|
|
HAL_RX_FILTER_BEACON = 0x00000010, /* Allow beacon frames */
|
|
HAL_RX_FILTER_PROM = 0x00000020, /* Promiscuous mode */
|
|
HAL_RX_FILTER_PROBEREQ = 0x00000080, /* Allow probe request frames */
|
|
HAL_RX_FILTER_PHYERR = 0x00000100, /* Allow phy errors */
|
|
HAL_RX_FILTER_PHYRADAR = 0x00000200, /* Allow phy radar errors */
|
|
HAL_RX_FILTER_COMPBAR = 0x00000400, /* Allow compressed BAR */
|
|
HAL_RX_FILTER_BSSID = 0x00000800, /* Disable BSSID match */
|
|
} HAL_RX_FILTER;
|
|
|
|
typedef enum {
|
|
HAL_PM_AWAKE = 0,
|
|
HAL_PM_FULL_SLEEP = 1,
|
|
HAL_PM_NETWORK_SLEEP = 2,
|
|
HAL_PM_UNDEFINED = 3
|
|
} HAL_POWER_MODE;
|
|
|
|
/*
|
|
* NOTE WELL:
|
|
* These are mapped to take advantage of the common locations for many of
|
|
* the bits on all of the currently supported MAC chips. This is to make
|
|
* the ISR as efficient as possible, while still abstracting HW differences.
|
|
* When new hardware breaks this commonality this enumerated type, as well
|
|
* as the HAL functions using it, must be modified. All values are directly
|
|
* mapped unless commented otherwise.
|
|
*/
|
|
typedef enum {
|
|
HAL_INT_RX = 0x00000001, /* Non-common mapping */
|
|
HAL_INT_RXDESC = 0x00000002,
|
|
HAL_INT_RXNOFRM = 0x00000008,
|
|
HAL_INT_RXEOL = 0x00000010,
|
|
HAL_INT_RXORN = 0x00000020,
|
|
HAL_INT_TX = 0x00000040, /* Non-common mapping */
|
|
HAL_INT_TXDESC = 0x00000080,
|
|
HAL_INT_TIM_TIMER= 0x00000100,
|
|
HAL_INT_TXURN = 0x00000800,
|
|
HAL_INT_MIB = 0x00001000,
|
|
HAL_INT_RXPHY = 0x00004000,
|
|
HAL_INT_RXKCM = 0x00008000,
|
|
HAL_INT_SWBA = 0x00010000,
|
|
HAL_INT_BMISS = 0x00040000,
|
|
HAL_INT_BNR = 0x00100000,
|
|
HAL_INT_TIM = 0x00200000, /* Non-common mapping */
|
|
HAL_INT_DTIM = 0x00400000, /* Non-common mapping */
|
|
HAL_INT_DTIMSYNC= 0x00800000, /* Non-common mapping */
|
|
HAL_INT_GPIO = 0x01000000,
|
|
HAL_INT_CABEND = 0x02000000, /* Non-common mapping */
|
|
HAL_INT_TSFOOR = 0x04000000, /* Non-common mapping */
|
|
HAL_INT_TBTT = 0x08000000, /* Non-common mapping */
|
|
HAL_INT_CST = 0x10000000, /* Non-common mapping */
|
|
HAL_INT_GTT = 0x20000000, /* Non-common mapping */
|
|
HAL_INT_FATAL = 0x40000000, /* Non-common mapping */
|
|
#define HAL_INT_GLOBAL 0x80000000 /* Set/clear IER */
|
|
HAL_INT_BMISC = HAL_INT_TIM
|
|
| HAL_INT_DTIM
|
|
| HAL_INT_DTIMSYNC
|
|
| HAL_INT_CABEND
|
|
| HAL_INT_TBTT,
|
|
|
|
/* Interrupt bits that map directly to ISR/IMR bits */
|
|
HAL_INT_COMMON = HAL_INT_RXNOFRM
|
|
| HAL_INT_RXDESC
|
|
| HAL_INT_RXEOL
|
|
| HAL_INT_RXORN
|
|
| HAL_INT_TXDESC
|
|
| HAL_INT_TXURN
|
|
| HAL_INT_MIB
|
|
| HAL_INT_RXPHY
|
|
| HAL_INT_RXKCM
|
|
| HAL_INT_SWBA
|
|
| HAL_INT_BMISS
|
|
| HAL_INT_BNR
|
|
| HAL_INT_GPIO,
|
|
} HAL_INT;
|
|
|
|
typedef enum {
|
|
HAL_GPIO_MUX_OUTPUT = 0,
|
|
HAL_GPIO_MUX_PCIE_ATTENTION_LED = 1,
|
|
HAL_GPIO_MUX_PCIE_POWER_LED = 2,
|
|
HAL_GPIO_MUX_TX_FRAME = 3,
|
|
HAL_GPIO_MUX_RX_CLEAR_EXTERNAL = 4,
|
|
HAL_GPIO_MUX_MAC_NETWORK_LED = 5,
|
|
HAL_GPIO_MUX_MAC_POWER_LED = 6
|
|
} HAL_GPIO_MUX_TYPE;
|
|
|
|
typedef enum {
|
|
HAL_GPIO_INTR_LOW = 0,
|
|
HAL_GPIO_INTR_HIGH = 1,
|
|
HAL_GPIO_INTR_DISABLE = 2
|
|
} HAL_GPIO_INTR_TYPE;
|
|
|
|
typedef enum {
|
|
HAL_RFGAIN_INACTIVE = 0,
|
|
HAL_RFGAIN_READ_REQUESTED = 1,
|
|
HAL_RFGAIN_NEED_CHANGE = 2
|
|
} HAL_RFGAIN;
|
|
|
|
typedef uint16_t HAL_CTRY_CODE; /* country code */
|
|
typedef uint16_t HAL_REG_DOMAIN; /* regulatory domain code */
|
|
|
|
#define HAL_ANTENNA_MIN_MODE 0
|
|
#define HAL_ANTENNA_FIXED_A 1
|
|
#define HAL_ANTENNA_FIXED_B 2
|
|
#define HAL_ANTENNA_MAX_MODE 3
|
|
|
|
typedef struct {
|
|
uint32_t ackrcv_bad;
|
|
uint32_t rts_bad;
|
|
uint32_t rts_good;
|
|
uint32_t fcs_bad;
|
|
uint32_t beacons;
|
|
} HAL_MIB_STATS;
|
|
|
|
enum {
|
|
HAL_MODE_11A = 0x001, /* 11a channels */
|
|
HAL_MODE_TURBO = 0x002, /* 11a turbo-only channels */
|
|
HAL_MODE_11B = 0x004, /* 11b channels */
|
|
HAL_MODE_PUREG = 0x008, /* 11g channels (OFDM only) */
|
|
#ifdef notdef
|
|
HAL_MODE_11G = 0x010, /* 11g channels (OFDM/CCK) */
|
|
#else
|
|
HAL_MODE_11G = 0x008, /* XXX historical */
|
|
#endif
|
|
HAL_MODE_108G = 0x020, /* 11g+Turbo channels */
|
|
HAL_MODE_108A = 0x040, /* 11a+Turbo channels */
|
|
HAL_MODE_11A_HALF_RATE = 0x200, /* 11a half width channels */
|
|
HAL_MODE_11A_QUARTER_RATE = 0x400, /* 11a quarter width channels */
|
|
HAL_MODE_11G_HALF_RATE = 0x800, /* 11g half width channels */
|
|
HAL_MODE_11G_QUARTER_RATE = 0x1000, /* 11g quarter width channels */
|
|
HAL_MODE_11NG_HT20 = 0x008000,
|
|
HAL_MODE_11NA_HT20 = 0x010000,
|
|
HAL_MODE_11NG_HT40PLUS = 0x020000,
|
|
HAL_MODE_11NG_HT40MINUS = 0x040000,
|
|
HAL_MODE_11NA_HT40PLUS = 0x080000,
|
|
HAL_MODE_11NA_HT40MINUS = 0x100000,
|
|
HAL_MODE_ALL = 0xffffff
|
|
};
|
|
|
|
typedef struct {
|
|
int rateCount; /* NB: for proper padding */
|
|
uint8_t rateCodeToIndex[144]; /* back mapping */
|
|
struct {
|
|
uint8_t valid; /* valid for rate control use */
|
|
uint8_t phy; /* CCK/OFDM/XR */
|
|
uint32_t rateKbps; /* transfer rate in kbs */
|
|
uint8_t rateCode; /* rate for h/w descriptors */
|
|
uint8_t shortPreamble; /* mask for enabling short
|
|
* preamble in CCK rate code */
|
|
uint8_t dot11Rate; /* value for supported rates
|
|
* info element of MLME */
|
|
uint8_t controlRate; /* index of next lower basic
|
|
* rate; used for dur. calcs */
|
|
uint16_t lpAckDuration; /* long preamble ACK duration */
|
|
uint16_t spAckDuration; /* short preamble ACK duration*/
|
|
} info[32];
|
|
} HAL_RATE_TABLE;
|
|
|
|
typedef struct {
|
|
u_int rs_count; /* number of valid entries */
|
|
uint8_t rs_rates[32]; /* rates */
|
|
} HAL_RATE_SET;
|
|
|
|
/*
|
|
* 802.11n specific structures and enums
|
|
*/
|
|
typedef enum {
|
|
HAL_CHAINTYPE_TX = 1, /* Tx chain type */
|
|
HAL_CHAINTYPE_RX = 2, /* RX chain type */
|
|
} HAL_CHAIN_TYPE;
|
|
|
|
typedef struct {
|
|
u_int Tries;
|
|
u_int Rate;
|
|
u_int PktDuration;
|
|
u_int ChSel;
|
|
u_int RateFlags;
|
|
#define HAL_RATESERIES_RTS_CTS 0x0001 /* use rts/cts w/this series */
|
|
#define HAL_RATESERIES_2040 0x0002 /* use ext channel for series */
|
|
#define HAL_RATESERIES_HALFGI 0x0004 /* use half-gi for series */
|
|
} HAL_11N_RATE_SERIES;
|
|
|
|
typedef enum {
|
|
HAL_HT_MACMODE_20 = 0, /* 20 MHz operation */
|
|
HAL_HT_MACMODE_2040 = 1, /* 20/40 MHz operation */
|
|
} HAL_HT_MACMODE;
|
|
|
|
typedef enum {
|
|
HAL_HT_PHYMODE_20 = 0, /* 20 MHz operation */
|
|
HAL_HT_PHYMODE_2040 = 1, /* 20/40 MHz operation */
|
|
} HAL_HT_PHYMODE;
|
|
|
|
typedef enum {
|
|
HAL_HT_EXTPROTSPACING_20 = 0, /* 20 MHz spacing */
|
|
HAL_HT_EXTPROTSPACING_25 = 1, /* 25 MHz spacing */
|
|
} HAL_HT_EXTPROTSPACING;
|
|
|
|
|
|
typedef enum {
|
|
HAL_RX_CLEAR_CTL_LOW = 0x1, /* force control channel to appear busy */
|
|
HAL_RX_CLEAR_EXT_LOW = 0x2, /* force extension channel to appear busy */
|
|
} HAL_HT_RXCLEAR;
|
|
|
|
/*
|
|
* Antenna switch control. By default antenna selection
|
|
* enables multiple (2) antenna use. To force use of the
|
|
* A or B antenna only specify a fixed setting. Fixing
|
|
* the antenna will also disable any diversity support.
|
|
*/
|
|
typedef enum {
|
|
HAL_ANT_VARIABLE = 0, /* variable by programming */
|
|
HAL_ANT_FIXED_A = 1, /* fixed antenna A */
|
|
HAL_ANT_FIXED_B = 2, /* fixed antenna B */
|
|
} HAL_ANT_SETTING;
|
|
|
|
typedef enum {
|
|
HAL_M_STA = 1, /* infrastructure station */
|
|
HAL_M_IBSS = 0, /* IBSS (adhoc) station */
|
|
HAL_M_HOSTAP = 6, /* Software Access Point */
|
|
HAL_M_MONITOR = 8 /* Monitor mode */
|
|
} HAL_OPMODE;
|
|
|
|
typedef struct {
|
|
uint8_t kv_type; /* one of HAL_CIPHER */
|
|
uint8_t kv_pad;
|
|
uint16_t kv_len; /* length in bits */
|
|
uint8_t kv_val[16]; /* enough for 128-bit keys */
|
|
uint8_t kv_mic[8]; /* TKIP MIC key */
|
|
uint8_t kv_txmic[8]; /* TKIP TX MIC key (optional) */
|
|
} HAL_KEYVAL;
|
|
|
|
typedef enum {
|
|
HAL_CIPHER_WEP = 0,
|
|
HAL_CIPHER_AES_OCB = 1,
|
|
HAL_CIPHER_AES_CCM = 2,
|
|
HAL_CIPHER_CKIP = 3,
|
|
HAL_CIPHER_TKIP = 4,
|
|
HAL_CIPHER_CLR = 5, /* no encryption */
|
|
|
|
HAL_CIPHER_MIC = 127 /* TKIP-MIC, not a cipher */
|
|
} HAL_CIPHER;
|
|
|
|
enum {
|
|
HAL_SLOT_TIME_6 = 6, /* NB: for turbo mode */
|
|
HAL_SLOT_TIME_9 = 9,
|
|
HAL_SLOT_TIME_20 = 20,
|
|
};
|
|
|
|
/*
|
|
* Per-station beacon timer state. Note that the specified
|
|
* beacon interval (given in TU's) can also include flags
|
|
* to force a TSF reset and to enable the beacon xmit logic.
|
|
* If bs_cfpmaxduration is non-zero the hardware is setup to
|
|
* coexist with a PCF-capable AP.
|
|
*/
|
|
typedef struct {
|
|
uint32_t bs_nexttbtt; /* next beacon in TU */
|
|
uint32_t bs_nextdtim; /* next DTIM in TU */
|
|
uint32_t bs_intval; /* beacon interval+flags */
|
|
#define HAL_BEACON_PERIOD 0x0000ffff /* beacon interval period */
|
|
#define HAL_BEACON_ENA 0x00800000 /* beacon xmit enable */
|
|
#define HAL_BEACON_RESET_TSF 0x01000000 /* clear TSF */
|
|
uint32_t bs_dtimperiod;
|
|
uint16_t bs_cfpperiod; /* CFP period in TU */
|
|
uint16_t bs_cfpmaxduration; /* max CFP duration in TU */
|
|
uint32_t bs_cfpnext; /* next CFP in TU */
|
|
uint16_t bs_timoffset; /* byte offset to TIM bitmap */
|
|
uint16_t bs_bmissthreshold; /* beacon miss threshold */
|
|
uint32_t bs_sleepduration; /* max sleep duration */
|
|
} HAL_BEACON_STATE;
|
|
|
|
/*
|
|
* Like HAL_BEACON_STATE but for non-station mode setup.
|
|
* NB: see above flag definitions for bt_intval.
|
|
*/
|
|
typedef struct {
|
|
uint32_t bt_intval; /* beacon interval+flags */
|
|
uint32_t bt_nexttbtt; /* next beacon in TU */
|
|
uint32_t bt_nextatim; /* next ATIM in TU */
|
|
uint32_t bt_nextdba; /* next DBA in 1/8th TU */
|
|
uint32_t bt_nextswba; /* next SWBA in 1/8th TU */
|
|
uint32_t bt_flags; /* timer enables */
|
|
#define HAL_BEACON_TBTT_EN 0x00000001
|
|
#define HAL_BEACON_DBA_EN 0x00000002
|
|
#define HAL_BEACON_SWBA_EN 0x00000004
|
|
} HAL_BEACON_TIMERS;
|
|
|
|
/*
|
|
* Per-node statistics maintained by the driver for use in
|
|
* optimizing signal quality and other operational aspects.
|
|
*/
|
|
typedef struct {
|
|
uint32_t ns_avgbrssi; /* average beacon rssi */
|
|
uint32_t ns_avgrssi; /* average data rssi */
|
|
uint32_t ns_avgtxrssi; /* average tx rssi */
|
|
} HAL_NODE_STATS;
|
|
|
|
#define HAL_RSSI_EP_MULTIPLIER (1<<7) /* pow2 to optimize out * and / */
|
|
|
|
struct ath_desc;
|
|
struct ath_tx_status;
|
|
struct ath_rx_status;
|
|
struct ieee80211_channel;
|
|
|
|
/*
|
|
* Hardware Access Layer (HAL) API.
|
|
*
|
|
* Clients of the HAL call ath_hal_attach to obtain a reference to an
|
|
* ath_hal structure for use with the device. Hardware-related operations
|
|
* that follow must call back into the HAL through interface, supplying
|
|
* the reference as the first parameter. Note that before using the
|
|
* reference returned by ath_hal_attach the caller should verify the
|
|
* ABI version number.
|
|
*/
|
|
struct ath_hal {
|
|
uint32_t ah_magic; /* consistency check magic number */
|
|
uint16_t ah_devid; /* PCI device ID */
|
|
uint16_t ah_subvendorid; /* PCI subvendor ID */
|
|
HAL_SOFTC ah_sc; /* back pointer to driver/os state */
|
|
HAL_BUS_TAG ah_st; /* params for register r+w */
|
|
HAL_BUS_HANDLE ah_sh;
|
|
HAL_CTRY_CODE ah_countryCode;
|
|
|
|
uint32_t ah_macVersion; /* MAC version id */
|
|
uint16_t ah_macRev; /* MAC revision */
|
|
uint16_t ah_phyRev; /* PHY revision */
|
|
/* NB: when only one radio is present the rev is in 5Ghz */
|
|
uint16_t ah_analog5GhzRev;/* 5GHz radio revision */
|
|
uint16_t ah_analog2GhzRev;/* 2GHz radio revision */
|
|
|
|
const HAL_RATE_TABLE *__ahdecl(*ah_getRateTable)(struct ath_hal *,
|
|
u_int mode);
|
|
void __ahdecl(*ah_detach)(struct ath_hal*);
|
|
|
|
/* Reset functions */
|
|
HAL_BOOL __ahdecl(*ah_reset)(struct ath_hal *, HAL_OPMODE,
|
|
struct ieee80211_channel *,
|
|
HAL_BOOL bChannelChange, HAL_STATUS *status);
|
|
HAL_BOOL __ahdecl(*ah_phyDisable)(struct ath_hal *);
|
|
HAL_BOOL __ahdecl(*ah_disable)(struct ath_hal *);
|
|
void __ahdecl(*ah_configPCIE)(struct ath_hal *, HAL_BOOL restore);
|
|
void __ahdecl(*ah_disablePCIE)(struct ath_hal *);
|
|
void __ahdecl(*ah_setPCUConfig)(struct ath_hal *);
|
|
HAL_BOOL __ahdecl(*ah_perCalibration)(struct ath_hal*,
|
|
struct ieee80211_channel *, HAL_BOOL *);
|
|
HAL_BOOL __ahdecl(*ah_perCalibrationN)(struct ath_hal *,
|
|
struct ieee80211_channel *, u_int chainMask,
|
|
HAL_BOOL longCal, HAL_BOOL *isCalDone);
|
|
HAL_BOOL __ahdecl(*ah_resetCalValid)(struct ath_hal *,
|
|
const struct ieee80211_channel *);
|
|
HAL_BOOL __ahdecl(*ah_setTxPower)(struct ath_hal *,
|
|
const struct ieee80211_channel *, uint16_t *);
|
|
HAL_BOOL __ahdecl(*ah_setTxPowerLimit)(struct ath_hal *, uint32_t);
|
|
HAL_BOOL __ahdecl(*ah_setBoardValues)(struct ath_hal *,
|
|
const struct ieee80211_channel *);
|
|
|
|
/* Transmit functions */
|
|
HAL_BOOL __ahdecl(*ah_updateTxTrigLevel)(struct ath_hal*,
|
|
HAL_BOOL incTrigLevel);
|
|
int __ahdecl(*ah_setupTxQueue)(struct ath_hal *, HAL_TX_QUEUE,
|
|
const HAL_TXQ_INFO *qInfo);
|
|
HAL_BOOL __ahdecl(*ah_setTxQueueProps)(struct ath_hal *, int q,
|
|
const HAL_TXQ_INFO *qInfo);
|
|
HAL_BOOL __ahdecl(*ah_getTxQueueProps)(struct ath_hal *, int q,
|
|
HAL_TXQ_INFO *qInfo);
|
|
HAL_BOOL __ahdecl(*ah_releaseTxQueue)(struct ath_hal *ah, u_int q);
|
|
HAL_BOOL __ahdecl(*ah_resetTxQueue)(struct ath_hal *ah, u_int q);
|
|
uint32_t __ahdecl(*ah_getTxDP)(struct ath_hal*, u_int);
|
|
HAL_BOOL __ahdecl(*ah_setTxDP)(struct ath_hal*, u_int, uint32_t txdp);
|
|
uint32_t __ahdecl(*ah_numTxPending)(struct ath_hal *, u_int q);
|
|
HAL_BOOL __ahdecl(*ah_startTxDma)(struct ath_hal*, u_int);
|
|
HAL_BOOL __ahdecl(*ah_stopTxDma)(struct ath_hal*, u_int);
|
|
HAL_BOOL __ahdecl(*ah_setupTxDesc)(struct ath_hal *, struct ath_desc *,
|
|
u_int pktLen, u_int hdrLen,
|
|
HAL_PKT_TYPE type, u_int txPower,
|
|
u_int txRate0, u_int txTries0,
|
|
u_int keyIx, u_int antMode, u_int flags,
|
|
u_int rtsctsRate, u_int rtsctsDuration,
|
|
u_int compicvLen, u_int compivLen,
|
|
u_int comp);
|
|
HAL_BOOL __ahdecl(*ah_setupXTxDesc)(struct ath_hal *, struct ath_desc*,
|
|
u_int txRate1, u_int txTries1,
|
|
u_int txRate2, u_int txTries2,
|
|
u_int txRate3, u_int txTries3);
|
|
HAL_BOOL __ahdecl(*ah_fillTxDesc)(struct ath_hal *, struct ath_desc *,
|
|
u_int segLen, HAL_BOOL firstSeg,
|
|
HAL_BOOL lastSeg, const struct ath_desc *);
|
|
HAL_STATUS __ahdecl(*ah_procTxDesc)(struct ath_hal *,
|
|
struct ath_desc *, struct ath_tx_status *);
|
|
void __ahdecl(*ah_getTxIntrQueue)(struct ath_hal *, uint32_t *);
|
|
void __ahdecl(*ah_reqTxIntrDesc)(struct ath_hal *, struct ath_desc*);
|
|
|
|
/* Receive Functions */
|
|
uint32_t __ahdecl(*ah_getRxDP)(struct ath_hal*);
|
|
void __ahdecl(*ah_setRxDP)(struct ath_hal*, uint32_t rxdp);
|
|
void __ahdecl(*ah_enableReceive)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_stopDmaReceive)(struct ath_hal*);
|
|
void __ahdecl(*ah_startPcuReceive)(struct ath_hal*);
|
|
void __ahdecl(*ah_stopPcuReceive)(struct ath_hal*);
|
|
void __ahdecl(*ah_setMulticastFilter)(struct ath_hal*,
|
|
uint32_t filter0, uint32_t filter1);
|
|
HAL_BOOL __ahdecl(*ah_setMulticastFilterIndex)(struct ath_hal*,
|
|
uint32_t index);
|
|
HAL_BOOL __ahdecl(*ah_clrMulticastFilterIndex)(struct ath_hal*,
|
|
uint32_t index);
|
|
uint32_t __ahdecl(*ah_getRxFilter)(struct ath_hal*);
|
|
void __ahdecl(*ah_setRxFilter)(struct ath_hal*, uint32_t);
|
|
HAL_BOOL __ahdecl(*ah_setupRxDesc)(struct ath_hal *, struct ath_desc *,
|
|
uint32_t size, u_int flags);
|
|
HAL_STATUS __ahdecl(*ah_procRxDesc)(struct ath_hal *,
|
|
struct ath_desc *, uint32_t phyAddr,
|
|
struct ath_desc *next, uint64_t tsf,
|
|
struct ath_rx_status *);
|
|
void __ahdecl(*ah_rxMonitor)(struct ath_hal *,
|
|
const HAL_NODE_STATS *,
|
|
const struct ieee80211_channel *);
|
|
void __ahdecl(*ah_procMibEvent)(struct ath_hal *,
|
|
const HAL_NODE_STATS *);
|
|
|
|
/* Misc Functions */
|
|
HAL_STATUS __ahdecl(*ah_getCapability)(struct ath_hal *,
|
|
HAL_CAPABILITY_TYPE, uint32_t capability,
|
|
uint32_t *result);
|
|
HAL_BOOL __ahdecl(*ah_setCapability)(struct ath_hal *,
|
|
HAL_CAPABILITY_TYPE, uint32_t capability,
|
|
uint32_t setting, HAL_STATUS *);
|
|
HAL_BOOL __ahdecl(*ah_getDiagState)(struct ath_hal *, int request,
|
|
const void *args, uint32_t argsize,
|
|
void **result, uint32_t *resultsize);
|
|
void __ahdecl(*ah_getMacAddress)(struct ath_hal *, uint8_t *);
|
|
HAL_BOOL __ahdecl(*ah_setMacAddress)(struct ath_hal *, const uint8_t*);
|
|
void __ahdecl(*ah_getBssIdMask)(struct ath_hal *, uint8_t *);
|
|
HAL_BOOL __ahdecl(*ah_setBssIdMask)(struct ath_hal *, const uint8_t*);
|
|
HAL_BOOL __ahdecl(*ah_setRegulatoryDomain)(struct ath_hal*,
|
|
uint16_t, HAL_STATUS *);
|
|
void __ahdecl(*ah_setLedState)(struct ath_hal*, HAL_LED_STATE);
|
|
void __ahdecl(*ah_writeAssocid)(struct ath_hal*,
|
|
const uint8_t *bssid, uint16_t assocId);
|
|
HAL_BOOL __ahdecl(*ah_gpioCfgOutput)(struct ath_hal *,
|
|
uint32_t gpio, HAL_GPIO_MUX_TYPE);
|
|
HAL_BOOL __ahdecl(*ah_gpioCfgInput)(struct ath_hal *, uint32_t gpio);
|
|
uint32_t __ahdecl(*ah_gpioGet)(struct ath_hal *, uint32_t gpio);
|
|
HAL_BOOL __ahdecl(*ah_gpioSet)(struct ath_hal *,
|
|
uint32_t gpio, uint32_t val);
|
|
void __ahdecl(*ah_gpioSetIntr)(struct ath_hal*, u_int, uint32_t);
|
|
uint32_t __ahdecl(*ah_getTsf32)(struct ath_hal*);
|
|
uint64_t __ahdecl(*ah_getTsf64)(struct ath_hal*);
|
|
void __ahdecl(*ah_resetTsf)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_detectCardPresent)(struct ath_hal*);
|
|
void __ahdecl(*ah_updateMibCounters)(struct ath_hal*,
|
|
HAL_MIB_STATS*);
|
|
HAL_RFGAIN __ahdecl(*ah_getRfGain)(struct ath_hal*);
|
|
u_int __ahdecl(*ah_getDefAntenna)(struct ath_hal*);
|
|
void __ahdecl(*ah_setDefAntenna)(struct ath_hal*, u_int);
|
|
HAL_ANT_SETTING __ahdecl(*ah_getAntennaSwitch)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_setAntennaSwitch)(struct ath_hal*,
|
|
HAL_ANT_SETTING);
|
|
HAL_BOOL __ahdecl(*ah_setSifsTime)(struct ath_hal*, u_int);
|
|
u_int __ahdecl(*ah_getSifsTime)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_setSlotTime)(struct ath_hal*, u_int);
|
|
u_int __ahdecl(*ah_getSlotTime)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_setAckTimeout)(struct ath_hal*, u_int);
|
|
u_int __ahdecl(*ah_getAckTimeout)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_setAckCTSRate)(struct ath_hal*, u_int);
|
|
u_int __ahdecl(*ah_getAckCTSRate)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_setCTSTimeout)(struct ath_hal*, u_int);
|
|
u_int __ahdecl(*ah_getCTSTimeout)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_setDecompMask)(struct ath_hal*, uint16_t, int);
|
|
void __ahdecl(*ah_setCoverageClass)(struct ath_hal*, uint8_t, int);
|
|
|
|
/* Key Cache Functions */
|
|
uint32_t __ahdecl(*ah_getKeyCacheSize)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_resetKeyCacheEntry)(struct ath_hal*, uint16_t);
|
|
HAL_BOOL __ahdecl(*ah_isKeyCacheEntryValid)(struct ath_hal *,
|
|
uint16_t);
|
|
HAL_BOOL __ahdecl(*ah_setKeyCacheEntry)(struct ath_hal*,
|
|
uint16_t, const HAL_KEYVAL *,
|
|
const uint8_t *, int);
|
|
HAL_BOOL __ahdecl(*ah_setKeyCacheEntryMac)(struct ath_hal*,
|
|
uint16_t, const uint8_t *);
|
|
|
|
/* Power Management Functions */
|
|
HAL_BOOL __ahdecl(*ah_setPowerMode)(struct ath_hal*,
|
|
HAL_POWER_MODE mode, int setChip);
|
|
HAL_POWER_MODE __ahdecl(*ah_getPowerMode)(struct ath_hal*);
|
|
int16_t __ahdecl(*ah_getChanNoise)(struct ath_hal *,
|
|
const struct ieee80211_channel *);
|
|
|
|
/* Beacon Management Functions */
|
|
void __ahdecl(*ah_setBeaconTimers)(struct ath_hal*,
|
|
const HAL_BEACON_TIMERS *);
|
|
/* NB: deprecated, use ah_setBeaconTimers instead */
|
|
void __ahdecl(*ah_beaconInit)(struct ath_hal *,
|
|
uint32_t nexttbtt, uint32_t intval);
|
|
void __ahdecl(*ah_setStationBeaconTimers)(struct ath_hal*,
|
|
const HAL_BEACON_STATE *);
|
|
void __ahdecl(*ah_resetStationBeaconTimers)(struct ath_hal*);
|
|
|
|
/* Interrupt functions */
|
|
HAL_BOOL __ahdecl(*ah_isInterruptPending)(struct ath_hal*);
|
|
HAL_BOOL __ahdecl(*ah_getPendingInterrupts)(struct ath_hal*, HAL_INT*);
|
|
HAL_INT __ahdecl(*ah_getInterrupts)(struct ath_hal*);
|
|
HAL_INT __ahdecl(*ah_setInterrupts)(struct ath_hal*, HAL_INT);
|
|
};
|
|
|
|
/*
|
|
* Check the PCI vendor ID and device ID against Atheros' values
|
|
* and return a printable description for any Atheros hardware.
|
|
* AH_NULL is returned if the ID's do not describe Atheros hardware.
|
|
*/
|
|
extern const char *__ahdecl ath_hal_probe(uint16_t vendorid, uint16_t devid);
|
|
|
|
/*
|
|
* Attach the HAL for use with the specified device. The device is
|
|
* defined by the PCI device ID. The caller provides an opaque pointer
|
|
* to an upper-layer data structure (HAL_SOFTC) that is stored in the
|
|
* HAL state block for later use. Hardware register accesses are done
|
|
* using the specified bus tag and handle. On successful return a
|
|
* reference to a state block is returned that must be supplied in all
|
|
* subsequent HAL calls. Storage associated with this reference is
|
|
* dynamically allocated and must be freed by calling the ah_detach
|
|
* method when the client is done. If the attach operation fails a
|
|
* null (AH_NULL) reference will be returned and a status code will
|
|
* be returned if the status parameter is non-zero.
|
|
*/
|
|
extern struct ath_hal * __ahdecl ath_hal_attach(uint16_t devid, HAL_SOFTC,
|
|
HAL_BUS_TAG, HAL_BUS_HANDLE, HAL_STATUS* status);
|
|
|
|
extern const char *ath_hal_mac_name(struct ath_hal *);
|
|
extern const char *ath_hal_rf_name(struct ath_hal *);
|
|
|
|
/*
|
|
* Regulatory interfaces. Drivers should use ath_hal_init_channels to
|
|
* request a set of channels for a particular country code and/or
|
|
* regulatory domain. If CTRY_DEFAULT and SKU_NONE are specified then
|
|
* this list is constructed according to the contents of the EEPROM.
|
|
* ath_hal_getchannels acts similarly but does not alter the operating
|
|
* state; this can be used to collect information for a particular
|
|
* regulatory configuration. Finally ath_hal_set_channels installs a
|
|
* channel list constructed outside the driver. The HAL will adopt the
|
|
* channel list and setup internal state according to the specified
|
|
* regulatory configuration (e.g. conformance test limits).
|
|
*
|
|
* For all interfaces the channel list is returned in the supplied array.
|
|
* maxchans defines the maximum size of this array. nchans contains the
|
|
* actual number of channels returned. If a problem occurred then a
|
|
* status code != HAL_OK is returned.
|
|
*/
|
|
struct ieee80211_channel;
|
|
|
|
/*
|
|
* Return a list of channels according to the specified regulatory.
|
|
*/
|
|
extern HAL_STATUS __ahdecl ath_hal_getchannels(struct ath_hal *,
|
|
struct ieee80211_channel *chans, u_int maxchans, int *nchans,
|
|
u_int modeSelect, HAL_CTRY_CODE cc, HAL_REG_DOMAIN regDmn,
|
|
HAL_BOOL enableExtendedChannels);
|
|
|
|
/*
|
|
* Return a list of channels and install it as the current operating
|
|
* regulatory list.
|
|
*/
|
|
extern HAL_STATUS __ahdecl ath_hal_init_channels(struct ath_hal *,
|
|
struct ieee80211_channel *chans, u_int maxchans, int *nchans,
|
|
u_int modeSelect, HAL_CTRY_CODE cc, HAL_REG_DOMAIN rd,
|
|
HAL_BOOL enableExtendedChannels);
|
|
|
|
/*
|
|
* Install the list of channels as the current operating regulatory
|
|
* and setup related state according to the country code and sku.
|
|
*/
|
|
extern HAL_STATUS __ahdecl ath_hal_set_channels(struct ath_hal *,
|
|
struct ieee80211_channel *chans, int nchans,
|
|
HAL_CTRY_CODE cc, HAL_REG_DOMAIN regDmn);
|
|
|
|
/*
|
|
* Calibrate noise floor data following a channel scan or similar.
|
|
* This must be called prior retrieving noise floor data.
|
|
*/
|
|
extern void __ahdecl ath_hal_process_noisefloor(struct ath_hal *ah);
|
|
|
|
/*
|
|
* Return bit mask of wireless modes supported by the hardware.
|
|
*/
|
|
extern u_int __ahdecl ath_hal_getwirelessmodes(struct ath_hal*);
|
|
|
|
/*
|
|
* Calculate the transmit duration of a frame.
|
|
*/
|
|
extern uint16_t __ahdecl ath_hal_computetxtime(struct ath_hal *,
|
|
const HAL_RATE_TABLE *rates, uint32_t frameLen,
|
|
uint16_t rateix, HAL_BOOL shortPreamble);
|
|
#endif /* _ATH_AH_H_ */
|