19d3b47b92
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
477 lines
12 KiB
C
477 lines
12 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
*
|
|
* Copyright (c) 2013 Adrian Chadd <adrian@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_ddb.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/cons.h>
|
|
#include <sys/kdb.h>
|
|
#include <sys/reboot.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_page.h>
|
|
|
|
#include <net/ethernet.h>
|
|
|
|
#include <machine/clock.h>
|
|
#include <machine/cpu.h>
|
|
#include <machine/cpuregs.h>
|
|
#include <machine/hwfunc.h>
|
|
#include <machine/md_var.h>
|
|
#include <machine/trap.h>
|
|
#include <machine/vmparam.h>
|
|
|
|
#include <mips/atheros/ar71xxreg.h>
|
|
#include <mips/atheros/ar934xreg.h>
|
|
|
|
#include <mips/atheros/ar71xx_cpudef.h>
|
|
#include <mips/atheros/ar71xx_setup.h>
|
|
|
|
#include <mips/atheros/ar71xx_chip.h>
|
|
#include <mips/atheros/ar934x_chip.h>
|
|
|
|
static void
|
|
ar934x_chip_detect_mem_size(void)
|
|
{
|
|
}
|
|
|
|
static uint32_t
|
|
ar934x_get_pll_freq(uint32_t ref, uint32_t ref_div, uint32_t nint,
|
|
uint32_t nfrac, uint32_t frac, uint32_t out_div)
|
|
{
|
|
uint64_t t;
|
|
uint32_t ret;
|
|
|
|
t = u_ar71xx_refclk;
|
|
t *= nint;
|
|
t = t / ref_div;
|
|
ret = t;
|
|
|
|
t = u_ar71xx_refclk;
|
|
t *= nfrac;
|
|
t = t / (ref_div * frac);
|
|
ret += t;
|
|
|
|
ret /= (1 << out_div);
|
|
return (ret);
|
|
}
|
|
|
|
static void
|
|
ar934x_chip_detect_sys_frequency(void)
|
|
{
|
|
uint32_t pll, out_div, ref_div, nint, nfrac, frac, clk_ctrl, postdiv;
|
|
uint32_t cpu_pll, ddr_pll;
|
|
uint32_t bootstrap;
|
|
uint32_t reg;
|
|
|
|
bootstrap = ATH_READ_REG(AR934X_RESET_REG_BOOTSTRAP);
|
|
if (bootstrap & AR934X_BOOTSTRAP_REF_CLK_40)
|
|
u_ar71xx_refclk = 40 * 1000 * 1000;
|
|
else
|
|
u_ar71xx_refclk = 25 * 1000 * 1000;
|
|
|
|
pll = ATH_READ_REG(AR934X_SRIF_CPU_DPLL2_REG);
|
|
if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
|
|
out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
|
|
AR934X_SRIF_DPLL2_OUTDIV_MASK;
|
|
pll = ATH_READ_REG(AR934X_SRIF_CPU_DPLL1_REG);
|
|
nint = (pll >> AR934X_SRIF_DPLL1_NINT_SHIFT) &
|
|
AR934X_SRIF_DPLL1_NINT_MASK;
|
|
nfrac = pll & AR934X_SRIF_DPLL1_NFRAC_MASK;
|
|
ref_div = (pll >> AR934X_SRIF_DPLL1_REFDIV_SHIFT) &
|
|
AR934X_SRIF_DPLL1_REFDIV_MASK;
|
|
frac = 1 << 18;
|
|
} else {
|
|
pll = ATH_READ_REG(AR934X_PLL_CPU_CONFIG_REG);
|
|
out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
|
|
AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
|
|
ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
|
|
AR934X_PLL_CPU_CONFIG_REFDIV_MASK;
|
|
nint = (pll >> AR934X_PLL_CPU_CONFIG_NINT_SHIFT) &
|
|
AR934X_PLL_CPU_CONFIG_NINT_MASK;
|
|
nfrac = (pll >> AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
|
|
AR934X_PLL_CPU_CONFIG_NFRAC_MASK;
|
|
frac = 1 << 6;
|
|
}
|
|
|
|
cpu_pll = ar934x_get_pll_freq(u_ar71xx_refclk, ref_div, nint,
|
|
nfrac, frac, out_div);
|
|
|
|
pll = ATH_READ_REG(AR934X_SRIF_DDR_DPLL2_REG);
|
|
if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
|
|
out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
|
|
AR934X_SRIF_DPLL2_OUTDIV_MASK;
|
|
pll = ATH_READ_REG(AR934X_SRIF_DDR_DPLL1_REG);
|
|
nint = (pll >> AR934X_SRIF_DPLL1_NINT_SHIFT) &
|
|
AR934X_SRIF_DPLL1_NINT_MASK;
|
|
nfrac = pll & AR934X_SRIF_DPLL1_NFRAC_MASK;
|
|
ref_div = (pll >> AR934X_SRIF_DPLL1_REFDIV_SHIFT) &
|
|
AR934X_SRIF_DPLL1_REFDIV_MASK;
|
|
frac = 1 << 18;
|
|
} else {
|
|
pll = ATH_READ_REG(AR934X_PLL_DDR_CONFIG_REG);
|
|
out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
|
|
AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
|
|
ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
|
|
AR934X_PLL_DDR_CONFIG_REFDIV_MASK;
|
|
nint = (pll >> AR934X_PLL_DDR_CONFIG_NINT_SHIFT) &
|
|
AR934X_PLL_DDR_CONFIG_NINT_MASK;
|
|
nfrac = (pll >> AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
|
|
AR934X_PLL_DDR_CONFIG_NFRAC_MASK;
|
|
frac = 1 << 10;
|
|
}
|
|
|
|
ddr_pll = ar934x_get_pll_freq(u_ar71xx_refclk, ref_div, nint,
|
|
nfrac, frac, out_div);
|
|
|
|
clk_ctrl = ATH_READ_REG(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
|
|
|
|
postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
|
|
AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
|
|
|
|
if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS)
|
|
u_ar71xx_cpu_freq = u_ar71xx_refclk;
|
|
else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL)
|
|
u_ar71xx_cpu_freq = cpu_pll / (postdiv + 1);
|
|
else
|
|
u_ar71xx_cpu_freq = ddr_pll / (postdiv + 1);
|
|
|
|
postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT) &
|
|
AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK;
|
|
|
|
if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS)
|
|
u_ar71xx_ddr_freq = u_ar71xx_refclk;
|
|
else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL)
|
|
u_ar71xx_ddr_freq = ddr_pll / (postdiv + 1);
|
|
else
|
|
u_ar71xx_ddr_freq = cpu_pll / (postdiv + 1);
|
|
|
|
postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT) &
|
|
AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK;
|
|
|
|
if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS)
|
|
u_ar71xx_ahb_freq = u_ar71xx_refclk;
|
|
else if (clk_ctrl & AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL)
|
|
u_ar71xx_ahb_freq = ddr_pll / (postdiv + 1);
|
|
else
|
|
u_ar71xx_ahb_freq = cpu_pll / (postdiv + 1);
|
|
|
|
u_ar71xx_wdt_freq = u_ar71xx_refclk;
|
|
u_ar71xx_uart_freq = u_ar71xx_refclk;
|
|
|
|
/*
|
|
* Next, fetch reference clock speed for MDIO bus.
|
|
*/
|
|
reg = ATH_READ_REG(AR934X_PLL_SWITCH_CLOCK_CONTROL_REG);
|
|
if (reg & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL) {
|
|
printf("%s: mdio=100MHz\n", __func__);
|
|
u_ar71xx_mdio_freq = (100 * 1000 * 1000);
|
|
} else {
|
|
printf("%s: mdio=%d Hz\n", __func__, u_ar71xx_refclk);
|
|
u_ar71xx_mdio_freq = u_ar71xx_refclk;
|
|
}
|
|
}
|
|
|
|
static void
|
|
ar934x_chip_device_stop(uint32_t mask)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = ATH_READ_REG(AR934X_RESET_REG_RESET_MODULE);
|
|
ATH_WRITE_REG(AR934X_RESET_REG_RESET_MODULE, reg | mask);
|
|
}
|
|
|
|
static void
|
|
ar934x_chip_device_start(uint32_t mask)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = ATH_READ_REG(AR934X_RESET_REG_RESET_MODULE);
|
|
ATH_WRITE_REG(AR934X_RESET_REG_RESET_MODULE, reg & ~mask);
|
|
}
|
|
|
|
static int
|
|
ar934x_chip_device_stopped(uint32_t mask)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = ATH_READ_REG(AR934X_RESET_REG_RESET_MODULE);
|
|
return ((reg & mask) == mask);
|
|
}
|
|
|
|
static void
|
|
ar934x_chip_set_mii_speed(uint32_t unit, uint32_t speed)
|
|
{
|
|
|
|
/* XXX TODO */
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* XXX TODO !!
|
|
*/
|
|
static void
|
|
ar934x_chip_set_pll_ge(int unit, int speed, uint32_t pll)
|
|
{
|
|
|
|
switch (unit) {
|
|
case 0:
|
|
ATH_WRITE_REG(AR934X_PLL_ETH_XMII_CONTROL_REG, pll);
|
|
break;
|
|
case 1:
|
|
/* XXX nothing */
|
|
break;
|
|
default:
|
|
printf("%s: invalid PLL set for arge unit: %d\n",
|
|
__func__, unit);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void
|
|
ar934x_chip_ddr_flush(ar71xx_flush_ddr_id_t id)
|
|
{
|
|
|
|
switch (id) {
|
|
case AR71XX_CPU_DDR_FLUSH_GE0:
|
|
ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_GE0);
|
|
break;
|
|
case AR71XX_CPU_DDR_FLUSH_GE1:
|
|
ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_GE1);
|
|
break;
|
|
case AR71XX_CPU_DDR_FLUSH_USB:
|
|
ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_USB);
|
|
break;
|
|
case AR71XX_CPU_DDR_FLUSH_PCIE:
|
|
ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_PCIE);
|
|
break;
|
|
case AR71XX_CPU_DDR_FLUSH_WMAC:
|
|
ar71xx_ddr_flush(AR934X_DDR_REG_FLUSH_WMAC);
|
|
break;
|
|
default:
|
|
printf("%s: invalid DDR flush id (%d)\n", __func__, id);
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
static uint32_t
|
|
ar934x_chip_get_eth_pll(unsigned int mac, int speed)
|
|
{
|
|
uint32_t pll;
|
|
|
|
switch (speed) {
|
|
case 10:
|
|
pll = AR934X_PLL_VAL_10;
|
|
break;
|
|
case 100:
|
|
pll = AR934X_PLL_VAL_100;
|
|
break;
|
|
case 1000:
|
|
pll = AR934X_PLL_VAL_1000;
|
|
break;
|
|
default:
|
|
printf("%s%d: invalid speed %d\n", __func__, mac, speed);
|
|
pll = 0;
|
|
}
|
|
return (pll);
|
|
}
|
|
|
|
static void
|
|
ar934x_chip_reset_ethernet_switch(void)
|
|
{
|
|
|
|
ar71xx_device_stop(AR934X_RESET_ETH_SWITCH);
|
|
DELAY(100);
|
|
ar71xx_device_start(AR934X_RESET_ETH_SWITCH);
|
|
DELAY(100);
|
|
ar71xx_device_stop(AR934X_RESET_ETH_SWITCH_ANALOG);
|
|
DELAY(100);
|
|
ar71xx_device_start(AR934X_RESET_ETH_SWITCH_ANALOG);
|
|
DELAY(100);
|
|
}
|
|
|
|
static void
|
|
ar934x_configure_gmac(uint32_t gmac_cfg)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = ATH_READ_REG(AR934X_GMAC_REG_ETH_CFG);
|
|
printf("%s: ETH_CFG=0x%08x\n", __func__, reg);
|
|
|
|
reg &= ~(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0 |
|
|
AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE |
|
|
AR934X_ETH_CFG_SW_PHY_SWAP);
|
|
|
|
reg |= gmac_cfg;
|
|
|
|
ATH_WRITE_REG(AR934X_GMAC_REG_ETH_CFG, reg);
|
|
}
|
|
|
|
static void
|
|
ar934x_chip_init_usb_peripheral(void)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = ATH_READ_REG(AR934X_RESET_REG_BOOTSTRAP);
|
|
if (reg & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
|
|
return;
|
|
|
|
ar71xx_device_stop(AR934X_RESET_USBSUS_OVERRIDE);
|
|
DELAY(100);
|
|
|
|
ar71xx_device_start(AR934X_RESET_USB_PHY);
|
|
DELAY(100);
|
|
|
|
ar71xx_device_start(AR934X_RESET_USB_PHY_ANALOG);
|
|
DELAY(100);
|
|
|
|
ar71xx_device_start(AR934X_RESET_USB_HOST);
|
|
DELAY(100);
|
|
}
|
|
|
|
static void
|
|
ar934x_chip_set_mii_if(uint32_t unit, uint32_t mii_mode)
|
|
{
|
|
|
|
/*
|
|
* XXX !
|
|
*
|
|
* Nothing to see here; although gmac0 can have its
|
|
* MII configuration changed, the register values
|
|
* are slightly different.
|
|
*/
|
|
}
|
|
|
|
/*
|
|
* XXX TODO: fetch default MII divider configuration
|
|
*/
|
|
|
|
static void
|
|
ar934x_chip_reset_wmac(void)
|
|
{
|
|
|
|
/* XXX TODO */
|
|
}
|
|
|
|
static void
|
|
ar934x_chip_init_gmac(void)
|
|
{
|
|
long gmac_cfg;
|
|
|
|
if (resource_long_value("ar934x_gmac", 0, "gmac_cfg",
|
|
&gmac_cfg) == 0) {
|
|
printf("%s: gmac_cfg=0x%08lx\n",
|
|
__func__,
|
|
(long) gmac_cfg);
|
|
ar934x_configure_gmac((uint32_t) gmac_cfg);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reset the NAND Flash Controller.
|
|
*
|
|
* + active=1 means "make it active".
|
|
* + active=0 means "make it inactive".
|
|
*/
|
|
static void
|
|
ar934x_chip_reset_nfc(int active)
|
|
{
|
|
|
|
if (active) {
|
|
ar71xx_device_start(AR934X_RESET_NANDF);
|
|
DELAY(100);
|
|
|
|
ar71xx_device_start(AR934X_RESET_ETH_SWITCH_ANALOG);
|
|
DELAY(250);
|
|
} else {
|
|
ar71xx_device_stop(AR934X_RESET_ETH_SWITCH_ANALOG);
|
|
DELAY(250);
|
|
|
|
ar71xx_device_stop(AR934X_RESET_NANDF);
|
|
DELAY(100);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Configure the GPIO output mux setup.
|
|
*
|
|
* The AR934x introduced an output mux which allowed
|
|
* certain functions to be configured on any pin.
|
|
* Specifically, the switch PHY link LEDs and
|
|
* WMAC external RX LNA switches are not limited to
|
|
* a specific GPIO pin.
|
|
*/
|
|
static void
|
|
ar934x_chip_gpio_output_configure(int gpio, uint8_t func)
|
|
{
|
|
uint32_t reg, s;
|
|
uint32_t t;
|
|
|
|
if (gpio > AR934X_GPIO_COUNT)
|
|
return;
|
|
|
|
reg = AR934X_GPIO_REG_OUT_FUNC0 + rounddown(gpio, 4);
|
|
s = 8 * (gpio % 4);
|
|
|
|
/* read-modify-write */
|
|
t = ATH_READ_REG(AR71XX_GPIO_BASE + reg);
|
|
t &= ~(0xff << s);
|
|
t |= func << s;
|
|
ATH_WRITE_REG(AR71XX_GPIO_BASE + reg, t);
|
|
|
|
/* flush write */
|
|
ATH_READ_REG(AR71XX_GPIO_BASE + reg);
|
|
}
|
|
|
|
struct ar71xx_cpu_def ar934x_chip_def = {
|
|
&ar934x_chip_detect_mem_size,
|
|
&ar934x_chip_detect_sys_frequency,
|
|
&ar934x_chip_device_stop,
|
|
&ar934x_chip_device_start,
|
|
&ar934x_chip_device_stopped,
|
|
&ar934x_chip_set_pll_ge,
|
|
&ar934x_chip_set_mii_speed,
|
|
&ar934x_chip_set_mii_if,
|
|
&ar934x_chip_get_eth_pll,
|
|
&ar934x_chip_ddr_flush,
|
|
&ar934x_chip_init_usb_peripheral,
|
|
&ar934x_chip_reset_ethernet_switch,
|
|
&ar934x_chip_reset_wmac,
|
|
&ar934x_chip_init_gmac,
|
|
&ar934x_chip_reset_nfc,
|
|
&ar934x_chip_gpio_output_configure,
|
|
};
|