a2c1487946
- Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 9.255.01.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 1 week
388 lines
11 KiB
C
388 lines
11 KiB
C
/*-
|
|
* Copyright (c) 2008 Yahoo!, Inc.
|
|
* All rights reserved.
|
|
* Written by: John Baldwin <jhb@FreeBSD.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD userland interface
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
/*-
|
|
* Copyright (c) 2011-2015 LSI Corp.
|
|
* Copyright (c) 2013-2015 Avago Technologies
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _MPR_IOCTL_H_
|
|
#define _MPR_IOCTL_H_
|
|
|
|
#include <dev/mpr/mpi/mpi2_type.h>
|
|
#include <dev/mpr/mpi/mpi2.h>
|
|
#include <dev/mpr/mpi/mpi2_cnfg.h>
|
|
#include <dev/mpr/mpi/mpi2_sas.h>
|
|
|
|
/*
|
|
* For the read header requests, the header should include the page
|
|
* type or extended page type, page number, and page version. The
|
|
* buffer and length are unused. The completed header is returned in
|
|
* the 'header' member.
|
|
*
|
|
* For the read page and write page requests, 'buf' should point to a
|
|
* buffer of 'len' bytes which holds the entire page (including the
|
|
* header).
|
|
*
|
|
* All requests specify the page address in 'page_address'.
|
|
*/
|
|
struct mpr_cfg_page_req {
|
|
MPI2_CONFIG_PAGE_HEADER header;
|
|
uint32_t page_address;
|
|
void *buf;
|
|
int len;
|
|
uint16_t ioc_status;
|
|
};
|
|
|
|
struct mpr_ext_cfg_page_req {
|
|
MPI2_CONFIG_EXTENDED_PAGE_HEADER header;
|
|
uint32_t page_address;
|
|
void *buf;
|
|
int len;
|
|
uint16_t ioc_status;
|
|
};
|
|
|
|
struct mpr_raid_action {
|
|
uint8_t action;
|
|
uint8_t volume_bus;
|
|
uint8_t volume_id;
|
|
uint8_t phys_disk_num;
|
|
uint32_t action_data_word;
|
|
void *buf;
|
|
int len;
|
|
uint32_t volume_status;
|
|
uint32_t action_data[4];
|
|
uint16_t action_status;
|
|
uint16_t ioc_status;
|
|
uint8_t write;
|
|
};
|
|
|
|
struct mpr_usr_command {
|
|
void *req;
|
|
uint32_t req_len;
|
|
void *rpl;
|
|
uint32_t rpl_len;
|
|
void *buf;
|
|
int len;
|
|
uint32_t flags;
|
|
};
|
|
|
|
typedef struct mpr_pci_bits
|
|
{
|
|
union {
|
|
struct {
|
|
uint32_t DeviceNumber :5;
|
|
uint32_t FunctionNumber :3;
|
|
uint32_t BusNumber :24;
|
|
} bits;
|
|
uint32_t AsDWORD;
|
|
} u;
|
|
uint32_t PciSegmentId;
|
|
} mpr_pci_bits_t;
|
|
|
|
/*
|
|
* The following is the MPRIOCTL_GET_ADAPTER_DATA data structure. This data
|
|
* structure is setup so that we hopefully are properly aligned for both
|
|
* 32-bit and 64-bit mode applications.
|
|
*
|
|
* Adapter Type - Value = 6 = SCSI Protocol through SAS-3 adapter
|
|
*
|
|
* MPI Port Number - The PCI Function number for this device
|
|
*
|
|
* PCI Device HW Id - The PCI device number for this device
|
|
*
|
|
*/
|
|
#define MPRIOCTL_ADAPTER_TYPE_SAS3 6
|
|
typedef struct mpr_adapter_data
|
|
{
|
|
uint32_t StructureLength;
|
|
uint32_t AdapterType;
|
|
uint32_t MpiPortNumber;
|
|
uint32_t PCIDeviceHwId;
|
|
uint32_t PCIDeviceHwRev;
|
|
uint32_t SubSystemId;
|
|
uint32_t SubsystemVendorId;
|
|
uint32_t Reserved1;
|
|
uint32_t MpiFirmwareVersion;
|
|
uint32_t BiosVersion;
|
|
uint8_t DriverVersion[32];
|
|
uint8_t Reserved2;
|
|
uint8_t ScsiId;
|
|
uint16_t Reserved3;
|
|
mpr_pci_bits_t PciInformation;
|
|
} mpr_adapter_data_t;
|
|
|
|
|
|
typedef struct mpr_update_flash
|
|
{
|
|
uint64_t PtrBuffer;
|
|
uint32_t ImageChecksum;
|
|
uint32_t ImageOffset;
|
|
uint32_t ImageSize;
|
|
uint32_t ImageType;
|
|
} mpr_update_flash_t;
|
|
|
|
|
|
#define MPR_PASS_THRU_DIRECTION_NONE 0
|
|
#define MPR_PASS_THRU_DIRECTION_READ 1
|
|
#define MPR_PASS_THRU_DIRECTION_WRITE 2
|
|
#define MPR_PASS_THRU_DIRECTION_BOTH 3
|
|
|
|
typedef struct mpr_pass_thru
|
|
{
|
|
uint64_t PtrRequest;
|
|
uint64_t PtrReply;
|
|
uint64_t PtrData;
|
|
uint32_t RequestSize;
|
|
uint32_t ReplySize;
|
|
uint32_t DataSize;
|
|
uint32_t DataDirection;
|
|
uint64_t PtrDataOut;
|
|
uint32_t DataOutSize;
|
|
uint32_t Timeout;
|
|
} mpr_pass_thru_t;
|
|
|
|
|
|
/*
|
|
* Event queue defines
|
|
*/
|
|
#define MPR_EVENT_QUEUE_SIZE (50) /* Max Events stored in driver */
|
|
#define MPR_MAX_EVENT_DATA_LENGTH (48) /* Size of each event in Dwords */
|
|
|
|
typedef struct mpr_event_query
|
|
{
|
|
uint16_t Entries;
|
|
uint16_t Reserved;
|
|
uint32_t Types[4];
|
|
} mpr_event_query_t;
|
|
|
|
typedef struct mpr_event_enable
|
|
{
|
|
uint32_t Types[4];
|
|
} mpr_event_enable_t;
|
|
|
|
/*
|
|
* Event record entry for ioctl.
|
|
*/
|
|
typedef struct mpr_event_entry
|
|
{
|
|
uint32_t Type;
|
|
uint32_t Number;
|
|
uint32_t Data[MPR_MAX_EVENT_DATA_LENGTH];
|
|
} mpr_event_entry_t;
|
|
|
|
typedef struct mpr_event_report
|
|
{
|
|
uint32_t Size;
|
|
uint64_t PtrEvents;
|
|
} mpr_event_report_t;
|
|
|
|
|
|
typedef struct mpr_pci_info
|
|
{
|
|
uint32_t BusNumber;
|
|
uint8_t DeviceNumber;
|
|
uint8_t FunctionNumber;
|
|
uint16_t InterruptVector;
|
|
uint8_t PciHeader[256];
|
|
} mpr_pci_info_t;
|
|
|
|
|
|
typedef struct mpr_diag_action
|
|
{
|
|
uint32_t Action;
|
|
uint32_t Length;
|
|
uint64_t PtrDiagAction;
|
|
uint32_t ReturnCode;
|
|
} mpr_diag_action_t;
|
|
|
|
#define MPR_FW_DIAGNOSTIC_UID_NOT_FOUND (0xFF)
|
|
|
|
#define MPR_FW_DIAG_NEW (0x806E6577)
|
|
|
|
#define MPR_FW_DIAG_TYPE_REGISTER (0x00000001)
|
|
#define MPR_FW_DIAG_TYPE_UNREGISTER (0x00000002)
|
|
#define MPR_FW_DIAG_TYPE_QUERY (0x00000003)
|
|
#define MPR_FW_DIAG_TYPE_READ_BUFFER (0x00000004)
|
|
#define MPR_FW_DIAG_TYPE_RELEASE (0x00000005)
|
|
|
|
#define MPR_FW_DIAG_INVALID_UID (0x00000000)
|
|
|
|
#define MPR_DIAG_SUCCESS 0
|
|
#define MPR_DIAG_FAILURE 1
|
|
|
|
#define MPR_FW_DIAG_ERROR_SUCCESS (0x00000000)
|
|
#define MPR_FW_DIAG_ERROR_FAILURE (0x00000001)
|
|
#define MPR_FW_DIAG_ERROR_INVALID_PARAMETER (0x00000002)
|
|
#define MPR_FW_DIAG_ERROR_POST_FAILED (0x00000010)
|
|
#define MPR_FW_DIAG_ERROR_INVALID_UID (0x00000011)
|
|
#define MPR_FW_DIAG_ERROR_RELEASE_FAILED (0x00000012)
|
|
#define MPR_FW_DIAG_ERROR_NO_BUFFER (0x00000013)
|
|
#define MPR_FW_DIAG_ERROR_ALREADY_RELEASED (0x00000014)
|
|
|
|
|
|
typedef struct mpr_fw_diag_register
|
|
{
|
|
uint8_t ExtendedType;
|
|
uint8_t BufferType;
|
|
uint16_t ApplicationFlags;
|
|
uint32_t DiagnosticFlags;
|
|
uint32_t ProductSpecific[23];
|
|
uint32_t RequestedBufferSize;
|
|
uint32_t UniqueId;
|
|
} mpr_fw_diag_register_t;
|
|
|
|
typedef struct mpr_fw_diag_unregister
|
|
{
|
|
uint32_t UniqueId;
|
|
} mpr_fw_diag_unregister_t;
|
|
|
|
#define MPR_FW_DIAG_FLAG_APP_OWNED (0x0001)
|
|
#define MPR_FW_DIAG_FLAG_BUFFER_VALID (0x0002)
|
|
#define MPR_FW_DIAG_FLAG_FW_BUFFER_ACCESS (0x0004)
|
|
|
|
typedef struct mpr_fw_diag_query
|
|
{
|
|
uint8_t ExtendedType;
|
|
uint8_t BufferType;
|
|
uint16_t ApplicationFlags;
|
|
uint32_t DiagnosticFlags;
|
|
uint32_t ProductSpecific[23];
|
|
uint32_t TotalBufferSize;
|
|
uint32_t DriverAddedBufferSize;
|
|
uint32_t UniqueId;
|
|
} mpr_fw_diag_query_t;
|
|
|
|
typedef struct mpr_fw_diag_release
|
|
{
|
|
uint32_t UniqueId;
|
|
} mpr_fw_diag_release_t;
|
|
|
|
#define MPR_FW_DIAG_FLAG_REREGISTER (0x0001)
|
|
#define MPR_FW_DIAG_FLAG_FORCE_RELEASE (0x0002)
|
|
|
|
typedef struct mpr_diag_read_buffer
|
|
{
|
|
uint8_t Status;
|
|
uint8_t Reserved;
|
|
uint16_t Flags;
|
|
uint32_t StartingOffset;
|
|
uint32_t BytesToRead;
|
|
uint32_t UniqueId;
|
|
uint64_t PtrDataBuffer;
|
|
} mpr_diag_read_buffer_t;
|
|
|
|
/*
|
|
* Register Access
|
|
*/
|
|
#define REG_IO_READ 1
|
|
#define REG_IO_WRITE 2
|
|
#define REG_MEM_READ 3
|
|
#define REG_MEM_WRITE 4
|
|
|
|
typedef struct mpr_reg_access
|
|
{
|
|
uint32_t Command;
|
|
uint32_t RegOffset;
|
|
uint32_t RegData;
|
|
} mpr_reg_access_t;
|
|
|
|
typedef struct mpr_btdh_mapping
|
|
{
|
|
uint16_t TargetID;
|
|
uint16_t Bus;
|
|
uint16_t DevHandle;
|
|
uint16_t Reserved;
|
|
} mpr_btdh_mapping_t;
|
|
|
|
#define MPRIO_MPR_COMMAND_FLAG_VERBOSE 0x01
|
|
#define MPRIO_MPR_COMMAND_FLAG_DEBUG 0x02
|
|
#define MPRIO_READ_CFG_HEADER _IOWR('M', 200, struct mpr_cfg_page_req)
|
|
#define MPRIO_READ_CFG_PAGE _IOWR('M', 201, struct mpr_cfg_page_req)
|
|
#define MPRIO_READ_EXT_CFG_HEADER _IOWR('M', 202, struct mpr_ext_cfg_page_req)
|
|
#define MPRIO_READ_EXT_CFG_PAGE _IOWR('M', 203, struct mpr_ext_cfg_page_req)
|
|
#define MPRIO_WRITE_CFG_PAGE _IOWR('M', 204, struct mpr_cfg_page_req)
|
|
#define MPRIO_RAID_ACTION _IOWR('M', 205, struct mpr_raid_action)
|
|
#define MPRIO_MPR_COMMAND _IOWR('M', 210, struct mpr_usr_command)
|
|
|
|
#define MPTIOCTL ('I')
|
|
#define MPTIOCTL_GET_ADAPTER_DATA _IOWR(MPTIOCTL, 1,\
|
|
struct mpr_adapter_data)
|
|
#define MPTIOCTL_UPDATE_FLASH _IOWR(MPTIOCTL, 2,\
|
|
struct mpr_update_flash)
|
|
#define MPTIOCTL_RESET_ADAPTER _IO(MPTIOCTL, 3)
|
|
#define MPTIOCTL_PASS_THRU _IOWR(MPTIOCTL, 4,\
|
|
struct mpr_pass_thru)
|
|
#define MPTIOCTL_EVENT_QUERY _IOWR(MPTIOCTL, 5,\
|
|
struct mpr_event_query)
|
|
#define MPTIOCTL_EVENT_ENABLE _IOWR(MPTIOCTL, 6,\
|
|
struct mpr_event_enable)
|
|
#define MPTIOCTL_EVENT_REPORT _IOWR(MPTIOCTL, 7,\
|
|
struct mpr_event_report)
|
|
#define MPTIOCTL_GET_PCI_INFO _IOWR(MPTIOCTL, 8,\
|
|
struct mpr_pci_info)
|
|
#define MPTIOCTL_DIAG_ACTION _IOWR(MPTIOCTL, 9,\
|
|
struct mpr_diag_action)
|
|
#define MPTIOCTL_REG_ACCESS _IOWR(MPTIOCTL, 10,\
|
|
struct mpr_reg_access)
|
|
#define MPTIOCTL_BTDH_MAPPING _IOWR(MPTIOCTL, 11,\
|
|
struct mpr_btdh_mapping)
|
|
|
|
#endif /* !_MPR_IOCTL_H_ */
|