adrian 24bffc47a9 The AR5212 setup path (also used by the AR5416 code) configures a ... local variable with a beacon interval of 100 TU. This never gets modified if the beacon interval configuration changes. This may have been correct in earlier times, but with the advent of staggered beacons (which default to 1 / ATH_BCBUF beacon interval, so 25 TU here) this value is incorrect. It is used to configure the default CABQ readytime. So here, the cabq was being configured to be much greater than the target beacon timer (TBTT.) The driver should be configuring a cabq readytime value rather then leaving it to the HAL to choose sensible defaults. This should be done in the future - I'm simply trying to ensure sensible defaults are chosen.		2011-09-28 03:03:23 +00:00
..
ah_regdomain	These two are ath_hal regulatory domain updates from the Atheros	2011-07-20 12:46:58 +00:00
ar5210	Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.	2011-09-08 01:23:05 +00:00
ar5211	Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.	2011-09-08 01:23:05 +00:00
ar5212	The AR5212 setup path (also used by the AR5416 code) configures a	2011-09-28 03:03:23 +00:00
ar5312	Re-introduce a global ath_hal_debug again for now, whilst I figure out what	2011-06-23 06:55:29 +00:00
ar5416	The AR5212 setup path (also used by the AR5416 code) configures a	2011-09-28 03:03:23 +00:00
ar9001	Break out the PLL setup into (mostly) per-chip methods, rather than	2011-07-21 08:35:10 +00:00
ar9002	Undo this for now. It's "right", but it means everything will rely on	2011-08-03 23:57:38 +00:00
ah_debug.h	Add a new flag - HAL_DEBUG_UNMASKABLE - which always logs a debug message	2011-05-11 13:22:41 +00:00
ah_decode.h	Add some more OS_MARK probes to the RX DMA setup/teardown code path.	2011-04-07 13:14:51 +00:00
ah_desc.h	Add some more phyerr bits.	2011-07-31 03:33:02 +00:00
ah_devid.h	Merlin -> Kiwi	2011-05-26 09:16:09 +00:00
ah_diagcodes.h	Reserve a new diagnostic code for the channel survey code I'll add soon.	2011-03-19 14:37:13 +00:00
ah_eeprom_9287.c	Prepare for embedded use of the AR9285/AR9287.	2011-07-30 13:37:38 +00:00
ah_eeprom_9287.h	Make sure the extended regdomain word is initialised.	2011-06-28 00:01:55 +00:00
ah_eeprom_v1.c	Fix the eeprom set API method to return HAL_STATUS.	2011-05-14 15:12:02 +00:00
ah_eeprom_v1.h	Replace Id keyword with FreeBSD keyword and set the svn props correctly.	2010-03-03 17:32:32 +00:00
ah_eeprom_v3.c	Fix the eeprom set API method to return HAL_STATUS.	2011-05-14 15:12:02 +00:00
ah_eeprom_v3.h	Replace Id keyword with FreeBSD keyword and set the svn props correctly.	2010-03-03 17:32:32 +00:00
ah_eeprom_v4k.c	Remove the EEPROM minor >= 19 check for txgaintype; that's only needed for	2011-08-03 06:51:14 +00:00
ah_eeprom_v4k.h	Bring over a pdadc calibration fix from ath9k - unused power detector	2011-04-22 10:57:46 +00:00
ah_eeprom_v14.c	Introduce the FRAC_5G EEPROM parameter.	2011-07-30 13:45:12 +00:00
ah_eeprom_v14.h	Introduce the FRAC_5G EEPROM parameter.	2011-07-30 13:45:12 +00:00
ah_eeprom.h	Introduce the FRAC_5G EEPROM parameter.	2011-07-30 13:45:12 +00:00
ah_internal.h	Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.	2011-09-08 01:23:05 +00:00
ah_regdomain.c	Bitten again by the optional HALDEBUG compilation.	2011-08-08 18:05:22 +00:00
ah_regdomain.h	Migrate the regulatory database definitions into separate header files	2011-03-10 03:13:56 +00:00
ah_soc.h	Replace Id keyword with FreeBSD keyword and set the svn props correctly.	2010-03-03 17:32:32 +00:00
ah.c	Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.	2011-09-08 01:23:05 +00:00
ah.h	Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.	2011-09-08 01:23:05 +00:00