8dff590977
* Fix the multiple same-named devclasses; the duplicate name trips up the linker. * Re-do the taskqueue stuff to use the new cpuset API, not the old pinned API. * Add includes for the new location of the RSS configuration routines. This allows ixgbe to compile as a module /and/ linked into the kernel, along with RSS working. Sponsored by: Norse Corp, Inc.
4169 lines
118 KiB
C
4169 lines
118 KiB
C
/******************************************************************************
|
|
|
|
Copyright (c) 2001-2015, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
******************************************************************************/
|
|
/*$FreeBSD$*/
|
|
|
|
|
|
#ifndef IXGBE_STANDALONE_BUILD
|
|
#include "opt_inet.h"
|
|
#include "opt_inet6.h"
|
|
#include "opt_rss.h"
|
|
#endif
|
|
|
|
#include "ixgbe.h"
|
|
|
|
#ifdef RSS
|
|
#include <net/rss_config.h>
|
|
#include <netinet/in_rss.h>
|
|
#endif
|
|
|
|
/*********************************************************************
|
|
* Set this to one to display debug statistics
|
|
*********************************************************************/
|
|
int ixgbe_display_debug_stats = 0;
|
|
|
|
/*********************************************************************
|
|
* Driver version
|
|
*********************************************************************/
|
|
char ixgbe_driver_version[] = "2.7.4";
|
|
|
|
/*********************************************************************
|
|
* PCI Device ID Table
|
|
*
|
|
* Used by probe to select devices to load on
|
|
* Last field stores an index into ixgbe_strings
|
|
* Last entry must be all 0s
|
|
*
|
|
* { Vendor ID, Device ID, SubVendor ID, SubDevice ID, String Index }
|
|
*********************************************************************/
|
|
|
|
static ixgbe_vendor_info_t ixgbe_vendor_info_array[] =
|
|
{
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AF_DUAL_PORT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AF_SINGLE_PORT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598EB_CX4, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AT2, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598_DA_DUAL_PORT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598_CX4_DUAL_PORT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598EB_XF_LR, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598EB_SFP_LOM, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_KX4, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_KX4_MEZZ, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_SFP, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_XAUI_LOM, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_CX4, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_T3_LOM, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_COMBO_BACKPLANE, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_BACKPLANE_FCOE, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_SFP_SF2, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_SFP_FCOE, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599EN_SFP, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_SFP_SF_QP, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_QSFP_SF_QP, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540T, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540T1, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550T, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_KR, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_KX4, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_10G_T, 0, 0, 0},
|
|
/* required last entry */
|
|
{0, 0, 0, 0, 0}
|
|
};
|
|
|
|
/*********************************************************************
|
|
* Table of branding strings
|
|
*********************************************************************/
|
|
|
|
static char *ixgbe_strings[] = {
|
|
"Intel(R) PRO/10GbE PCI-Express Network Driver"
|
|
};
|
|
|
|
/*********************************************************************
|
|
* Function prototypes
|
|
*********************************************************************/
|
|
static int ixgbe_probe(device_t);
|
|
static int ixgbe_attach(device_t);
|
|
static int ixgbe_detach(device_t);
|
|
static int ixgbe_shutdown(device_t);
|
|
static int ixgbe_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static void ixgbe_init(void *);
|
|
static void ixgbe_init_locked(struct adapter *);
|
|
static void ixgbe_stop(void *);
|
|
#if __FreeBSD_version >= 1100036
|
|
static uint64_t ixgbe_get_counter(struct ifnet *, ift_counter);
|
|
#endif
|
|
static void ixgbe_add_media_types(struct adapter *);
|
|
static void ixgbe_media_status(struct ifnet *, struct ifmediareq *);
|
|
static int ixgbe_media_change(struct ifnet *);
|
|
static void ixgbe_identify_hardware(struct adapter *);
|
|
static int ixgbe_allocate_pci_resources(struct adapter *);
|
|
static void ixgbe_get_slot_info(struct ixgbe_hw *);
|
|
static int ixgbe_allocate_msix(struct adapter *);
|
|
static int ixgbe_allocate_legacy(struct adapter *);
|
|
static int ixgbe_setup_msix(struct adapter *);
|
|
static void ixgbe_free_pci_resources(struct adapter *);
|
|
static void ixgbe_local_timer(void *);
|
|
static int ixgbe_setup_interface(device_t, struct adapter *);
|
|
static void ixgbe_config_link(struct adapter *);
|
|
static void ixgbe_rearm_queues(struct adapter *, u64);
|
|
|
|
static void ixgbe_initialize_transmit_units(struct adapter *);
|
|
static void ixgbe_initialize_receive_units(struct adapter *);
|
|
static void ixgbe_enable_rx_drop(struct adapter *);
|
|
static void ixgbe_disable_rx_drop(struct adapter *);
|
|
|
|
static void ixgbe_enable_intr(struct adapter *);
|
|
static void ixgbe_disable_intr(struct adapter *);
|
|
static void ixgbe_update_stats_counters(struct adapter *);
|
|
static void ixgbe_set_promisc(struct adapter *);
|
|
static void ixgbe_set_multi(struct adapter *);
|
|
static void ixgbe_update_link_status(struct adapter *);
|
|
static int ixgbe_set_flowcntl(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_set_advertise(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_set_thermal_test(SYSCTL_HANDLER_ARGS);
|
|
static void ixgbe_set_ivar(struct adapter *, u8, u8, s8);
|
|
static void ixgbe_configure_ivars(struct adapter *);
|
|
static u8 * ixgbe_mc_array_itr(struct ixgbe_hw *, u8 **, u32 *);
|
|
|
|
static void ixgbe_setup_vlan_hw_support(struct adapter *);
|
|
static void ixgbe_register_vlan(void *, struct ifnet *, u16);
|
|
static void ixgbe_unregister_vlan(void *, struct ifnet *, u16);
|
|
|
|
static void ixgbe_add_hw_stats(struct adapter *adapter);
|
|
|
|
/* Support for pluggable optic modules */
|
|
static bool ixgbe_sfp_probe(struct adapter *);
|
|
static void ixgbe_setup_optics(struct adapter *);
|
|
|
|
/* Legacy (single vector interrupt handler */
|
|
static void ixgbe_legacy_irq(void *);
|
|
|
|
/* The MSI/X Interrupt handlers */
|
|
static void ixgbe_msix_que(void *);
|
|
static void ixgbe_msix_link(void *);
|
|
|
|
/* Deferred interrupt tasklets */
|
|
static void ixgbe_handle_que(void *, int);
|
|
static void ixgbe_handle_link(void *, int);
|
|
static void ixgbe_handle_msf(void *, int);
|
|
static void ixgbe_handle_mod(void *, int);
|
|
|
|
#ifdef IXGBE_FDIR
|
|
static void ixgbe_reinit_fdir(void *, int);
|
|
#endif
|
|
|
|
|
|
/* Missing shared code prototype */
|
|
extern void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw);
|
|
|
|
/*********************************************************************
|
|
* FreeBSD Device Interface Entry Points
|
|
*********************************************************************/
|
|
|
|
static device_method_t ix_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, ixgbe_probe),
|
|
DEVMETHOD(device_attach, ixgbe_attach),
|
|
DEVMETHOD(device_detach, ixgbe_detach),
|
|
DEVMETHOD(device_shutdown, ixgbe_shutdown),
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t ix_driver = {
|
|
"ix", ix_methods, sizeof(struct adapter),
|
|
};
|
|
|
|
devclass_t ix_devclass;
|
|
DRIVER_MODULE(ix, pci, ix_driver, ix_devclass, 0, 0);
|
|
|
|
MODULE_DEPEND(ix, pci, 1, 1, 1);
|
|
MODULE_DEPEND(ix, ether, 1, 1, 1);
|
|
|
|
/*
|
|
** TUNEABLE PARAMETERS:
|
|
*/
|
|
|
|
static SYSCTL_NODE(_hw, OID_AUTO, ix, CTLFLAG_RD, 0,
|
|
"IXGBE driver parameters");
|
|
|
|
/*
|
|
** AIM: Adaptive Interrupt Moderation
|
|
** which means that the interrupt rate
|
|
** is varied over time based on the
|
|
** traffic for that interrupt vector
|
|
*/
|
|
static int ixgbe_enable_aim = TRUE;
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, enable_aim, CTLFLAG_RWTUN, &ixgbe_enable_aim, 0,
|
|
"Enable adaptive interrupt moderation");
|
|
|
|
static int ixgbe_max_interrupt_rate = (4000000 / IXGBE_LOW_LATENCY);
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, max_interrupt_rate, CTLFLAG_RDTUN,
|
|
&ixgbe_max_interrupt_rate, 0, "Maximum interrupts per second");
|
|
|
|
/* How many packets rxeof tries to clean at a time */
|
|
static int ixgbe_rx_process_limit = 256;
|
|
TUNABLE_INT("hw.ixgbe.rx_process_limit", &ixgbe_rx_process_limit);
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, rx_process_limit, CTLFLAG_RDTUN,
|
|
&ixgbe_rx_process_limit, 0,
|
|
"Maximum number of received packets to process at a time,"
|
|
"-1 means unlimited");
|
|
|
|
/* How many packets txeof tries to clean at a time */
|
|
static int ixgbe_tx_process_limit = 256;
|
|
TUNABLE_INT("hw.ixgbe.tx_process_limit", &ixgbe_tx_process_limit);
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, tx_process_limit, CTLFLAG_RDTUN,
|
|
&ixgbe_tx_process_limit, 0,
|
|
"Maximum number of sent packets to process at a time,"
|
|
"-1 means unlimited");
|
|
|
|
/*
|
|
** Smart speed setting, default to on
|
|
** this only works as a compile option
|
|
** right now as its during attach, set
|
|
** this to 'ixgbe_smart_speed_off' to
|
|
** disable.
|
|
*/
|
|
static int ixgbe_smart_speed = ixgbe_smart_speed_on;
|
|
|
|
/*
|
|
* MSIX should be the default for best performance,
|
|
* but this allows it to be forced off for testing.
|
|
*/
|
|
static int ixgbe_enable_msix = 1;
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, enable_msix, CTLFLAG_RDTUN, &ixgbe_enable_msix, 0,
|
|
"Enable MSI-X interrupts");
|
|
|
|
/*
|
|
* Number of Queues, can be set to 0,
|
|
* it then autoconfigures based on the
|
|
* number of cpus with a max of 8. This
|
|
* can be overriden manually here.
|
|
*/
|
|
static int ixgbe_num_queues = 0;
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, num_queues, CTLFLAG_RDTUN, &ixgbe_num_queues, 0,
|
|
"Number of queues to configure, 0 indicates autoconfigure");
|
|
|
|
/*
|
|
** Number of TX descriptors per ring,
|
|
** setting higher than RX as this seems
|
|
** the better performing choice.
|
|
*/
|
|
static int ixgbe_txd = PERFORM_TXD;
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, txd, CTLFLAG_RDTUN, &ixgbe_txd, 0,
|
|
"Number of transmit descriptors per queue");
|
|
|
|
/* Number of RX descriptors per ring */
|
|
static int ixgbe_rxd = PERFORM_RXD;
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, rxd, CTLFLAG_RDTUN, &ixgbe_rxd, 0,
|
|
"Number of receive descriptors per queue");
|
|
|
|
/*
|
|
** Defining this on will allow the use
|
|
** of unsupported SFP+ modules, note that
|
|
** doing so you are on your own :)
|
|
*/
|
|
static int allow_unsupported_sfp = FALSE;
|
|
TUNABLE_INT("hw.ix.unsupported_sfp", &allow_unsupported_sfp);
|
|
|
|
/* Keep running tab on them for sanity check */
|
|
static int ixgbe_total_ports;
|
|
|
|
#ifdef IXGBE_FDIR
|
|
/*
|
|
** Flow Director actually 'steals'
|
|
** part of the packet buffer as its
|
|
** filter pool, this variable controls
|
|
** how much it uses:
|
|
** 0 = 64K, 1 = 128K, 2 = 256K
|
|
*/
|
|
static int fdir_pballoc = 1;
|
|
#endif
|
|
|
|
#ifdef DEV_NETMAP
|
|
/*
|
|
* The #ifdef DEV_NETMAP / #endif blocks in this file are meant to
|
|
* be a reference on how to implement netmap support in a driver.
|
|
* Additional comments are in ixgbe_netmap.h .
|
|
*
|
|
* <dev/netmap/ixgbe_netmap.h> contains functions for netmap support
|
|
* that extend the standard driver.
|
|
*/
|
|
#include <dev/netmap/ixgbe_netmap.h>
|
|
#endif /* DEV_NETMAP */
|
|
|
|
/*********************************************************************
|
|
* Device identification routine
|
|
*
|
|
* ixgbe_probe determines if the driver should be loaded on
|
|
* adapter based on PCI vendor/device id of the adapter.
|
|
*
|
|
* return BUS_PROBE_DEFAULT on success, positive on failure
|
|
*********************************************************************/
|
|
|
|
static int
|
|
ixgbe_probe(device_t dev)
|
|
{
|
|
ixgbe_vendor_info_t *ent;
|
|
|
|
u16 pci_vendor_id = 0;
|
|
u16 pci_device_id = 0;
|
|
u16 pci_subvendor_id = 0;
|
|
u16 pci_subdevice_id = 0;
|
|
char adapter_name[256];
|
|
|
|
INIT_DEBUGOUT("ixgbe_probe: begin");
|
|
|
|
pci_vendor_id = pci_get_vendor(dev);
|
|
if (pci_vendor_id != IXGBE_INTEL_VENDOR_ID)
|
|
return (ENXIO);
|
|
|
|
pci_device_id = pci_get_device(dev);
|
|
pci_subvendor_id = pci_get_subvendor(dev);
|
|
pci_subdevice_id = pci_get_subdevice(dev);
|
|
|
|
ent = ixgbe_vendor_info_array;
|
|
while (ent->vendor_id != 0) {
|
|
if ((pci_vendor_id == ent->vendor_id) &&
|
|
(pci_device_id == ent->device_id) &&
|
|
|
|
((pci_subvendor_id == ent->subvendor_id) ||
|
|
(ent->subvendor_id == 0)) &&
|
|
|
|
((pci_subdevice_id == ent->subdevice_id) ||
|
|
(ent->subdevice_id == 0))) {
|
|
sprintf(adapter_name, "%s, Version - %s",
|
|
ixgbe_strings[ent->index],
|
|
ixgbe_driver_version);
|
|
device_set_desc_copy(dev, adapter_name);
|
|
++ixgbe_total_ports;
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
ent++;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Device initialization routine
|
|
*
|
|
* The attach entry point is called when the driver is being loaded.
|
|
* This routine identifies the type of hardware, allocates all resources
|
|
* and initializes the hardware.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
*********************************************************************/
|
|
|
|
static int
|
|
ixgbe_attach(device_t dev)
|
|
{
|
|
struct adapter *adapter;
|
|
struct ixgbe_hw *hw;
|
|
int error = 0;
|
|
u16 csum;
|
|
u32 ctrl_ext;
|
|
|
|
INIT_DEBUGOUT("ixgbe_attach: begin");
|
|
|
|
/* Allocate, clear, and link in our adapter structure */
|
|
adapter = device_get_softc(dev);
|
|
adapter->dev = adapter->osdep.dev = dev;
|
|
hw = &adapter->hw;
|
|
|
|
/* Core Lock Init*/
|
|
IXGBE_CORE_LOCK_INIT(adapter, device_get_nameunit(dev));
|
|
|
|
/* SYSCTL APIs */
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "fc", CTLTYPE_INT | CTLFLAG_RW,
|
|
adapter, 0, ixgbe_set_flowcntl, "I", IXGBE_SYSCTL_DESC_SET_FC);
|
|
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "enable_aim", CTLFLAG_RW,
|
|
&ixgbe_enable_aim, 1, "Interrupt Moderation");
|
|
|
|
/*
|
|
** Allow a kind of speed control by forcing the autoneg
|
|
** advertised speed list to only a certain value, this
|
|
** supports 1G on 82599 devices, and 100Mb on x540.
|
|
*/
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "advertise_speed", CTLTYPE_INT | CTLFLAG_RW,
|
|
adapter, 0, ixgbe_set_advertise, "I", IXGBE_SYSCTL_DESC_ADV_SPEED);
|
|
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "ts", CTLTYPE_INT | CTLFLAG_RW, adapter,
|
|
0, ixgbe_set_thermal_test, "I", "Thermal Test");
|
|
|
|
/* Set up the timer callout */
|
|
callout_init_mtx(&adapter->timer, &adapter->core_mtx, 0);
|
|
|
|
/* Determine hardware revision */
|
|
ixgbe_identify_hardware(adapter);
|
|
|
|
/* Do base PCI setup - map BAR0 */
|
|
if (ixgbe_allocate_pci_resources(adapter)) {
|
|
device_printf(dev, "Allocation of PCI resources failed\n");
|
|
error = ENXIO;
|
|
goto err_out;
|
|
}
|
|
|
|
/* Do descriptor calc and sanity checks */
|
|
if (((ixgbe_txd * sizeof(union ixgbe_adv_tx_desc)) % DBA_ALIGN) != 0 ||
|
|
ixgbe_txd < MIN_TXD || ixgbe_txd > MAX_TXD) {
|
|
device_printf(dev, "TXD config issue, using default!\n");
|
|
adapter->num_tx_desc = DEFAULT_TXD;
|
|
} else
|
|
adapter->num_tx_desc = ixgbe_txd;
|
|
|
|
/*
|
|
** With many RX rings it is easy to exceed the
|
|
** system mbuf allocation. Tuning nmbclusters
|
|
** can alleviate this.
|
|
*/
|
|
if (nmbclusters > 0) {
|
|
int s;
|
|
s = (ixgbe_rxd * adapter->num_queues) * ixgbe_total_ports;
|
|
if (s > nmbclusters) {
|
|
device_printf(dev, "RX Descriptors exceed "
|
|
"system mbuf max, using default instead!\n");
|
|
ixgbe_rxd = DEFAULT_RXD;
|
|
}
|
|
}
|
|
|
|
if (((ixgbe_rxd * sizeof(union ixgbe_adv_rx_desc)) % DBA_ALIGN) != 0 ||
|
|
ixgbe_rxd < MIN_RXD || ixgbe_rxd > MAX_RXD) {
|
|
device_printf(dev, "RXD config issue, using default!\n");
|
|
adapter->num_rx_desc = DEFAULT_RXD;
|
|
} else
|
|
adapter->num_rx_desc = ixgbe_rxd;
|
|
|
|
/* Allocate our TX/RX Queues */
|
|
if (ixgbe_allocate_queues(adapter)) {
|
|
error = ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
/* Allocate multicast array memory. */
|
|
adapter->mta = malloc(sizeof(u8) * IXGBE_ETH_LENGTH_OF_ADDRESS *
|
|
MAX_NUM_MULTICAST_ADDRESSES, M_DEVBUF, M_NOWAIT);
|
|
if (adapter->mta == NULL) {
|
|
device_printf(dev, "Can not allocate multicast setup array\n");
|
|
error = ENOMEM;
|
|
goto err_late;
|
|
}
|
|
|
|
/* Initialize the shared code */
|
|
hw->allow_unsupported_sfp = allow_unsupported_sfp;
|
|
error = ixgbe_init_shared_code(hw);
|
|
if (error == IXGBE_ERR_SFP_NOT_PRESENT) {
|
|
/*
|
|
** No optics in this port, set up
|
|
** so the timer routine will probe
|
|
** for later insertion.
|
|
*/
|
|
adapter->sfp_probe = TRUE;
|
|
error = 0;
|
|
} else if (error == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,"Unsupported SFP+ module detected!\n");
|
|
error = EIO;
|
|
goto err_late;
|
|
} else if (error) {
|
|
device_printf(dev,"Unable to initialize the shared code\n");
|
|
error = EIO;
|
|
goto err_late;
|
|
}
|
|
|
|
/* Make sure we have a good EEPROM before we read from it */
|
|
if (ixgbe_validate_eeprom_checksum(&adapter->hw, &csum) < 0) {
|
|
device_printf(dev,"The EEPROM Checksum Is Not Valid\n");
|
|
error = EIO;
|
|
goto err_late;
|
|
}
|
|
|
|
error = ixgbe_init_hw(hw);
|
|
switch (error) {
|
|
case IXGBE_ERR_EEPROM_VERSION:
|
|
device_printf(dev, "This device is a pre-production adapter/"
|
|
"LOM. Please be aware there may be issues associated "
|
|
"with your hardware.\n If you are experiencing problems "
|
|
"please contact your Intel or hardware representative "
|
|
"who provided you with this hardware.\n");
|
|
break;
|
|
case IXGBE_ERR_SFP_NOT_SUPPORTED:
|
|
device_printf(dev,"Unsupported SFP+ Module\n");
|
|
error = EIO;
|
|
goto err_late;
|
|
case IXGBE_ERR_SFP_NOT_PRESENT:
|
|
device_printf(dev,"No SFP+ Module found\n");
|
|
/* falls thru */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Detect and set physical type */
|
|
ixgbe_setup_optics(adapter);
|
|
|
|
if ((adapter->msix > 1) && (ixgbe_enable_msix))
|
|
error = ixgbe_allocate_msix(adapter);
|
|
else
|
|
error = ixgbe_allocate_legacy(adapter);
|
|
if (error)
|
|
goto err_late;
|
|
|
|
/* Setup OS specific network interface */
|
|
if (ixgbe_setup_interface(dev, adapter) != 0)
|
|
goto err_late;
|
|
|
|
/* Initialize statistics */
|
|
ixgbe_update_stats_counters(adapter);
|
|
|
|
/* Register for VLAN events */
|
|
adapter->vlan_attach = EVENTHANDLER_REGISTER(vlan_config,
|
|
ixgbe_register_vlan, adapter, EVENTHANDLER_PRI_FIRST);
|
|
adapter->vlan_detach = EVENTHANDLER_REGISTER(vlan_unconfig,
|
|
ixgbe_unregister_vlan, adapter, EVENTHANDLER_PRI_FIRST);
|
|
|
|
/*
|
|
** Check PCIE slot type/speed/width
|
|
*/
|
|
ixgbe_get_slot_info(hw);
|
|
|
|
|
|
/* Set an initial default flow control value */
|
|
adapter->fc = ixgbe_fc_full;
|
|
|
|
/* let hardware know driver is loaded */
|
|
ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
|
|
ctrl_ext |= IXGBE_CTRL_EXT_DRV_LOAD;
|
|
IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
|
|
|
|
ixgbe_add_hw_stats(adapter);
|
|
|
|
#ifdef DEV_NETMAP
|
|
ixgbe_netmap_attach(adapter);
|
|
#endif /* DEV_NETMAP */
|
|
INIT_DEBUGOUT("ixgbe_attach: end");
|
|
return (0);
|
|
|
|
err_late:
|
|
ixgbe_free_transmit_structures(adapter);
|
|
ixgbe_free_receive_structures(adapter);
|
|
err_out:
|
|
if (adapter->ifp != NULL)
|
|
if_free(adapter->ifp);
|
|
ixgbe_free_pci_resources(adapter);
|
|
free(adapter->mta, M_DEVBUF);
|
|
return (error);
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Device removal routine
|
|
*
|
|
* The detach entry point is called when the driver is being removed.
|
|
* This routine stops the adapter and deallocates all the resources
|
|
* that were allocated for driver operation.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
*********************************************************************/
|
|
|
|
static int
|
|
ixgbe_detach(device_t dev)
|
|
{
|
|
struct adapter *adapter = device_get_softc(dev);
|
|
struct ix_queue *que = adapter->queues;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
u32 ctrl_ext;
|
|
|
|
INIT_DEBUGOUT("ixgbe_detach: begin");
|
|
|
|
/* Make sure VLANS are not using driver */
|
|
if (adapter->ifp->if_vlantrunk != NULL) {
|
|
device_printf(dev,"Vlan in use, detach first\n");
|
|
return (EBUSY);
|
|
}
|
|
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_stop(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, que++, txr++) {
|
|
if (que->tq) {
|
|
#ifndef IXGBE_LEGACY_TX
|
|
taskqueue_drain(que->tq, &txr->txq_task);
|
|
#endif
|
|
taskqueue_drain(que->tq, &que->que_task);
|
|
taskqueue_free(que->tq);
|
|
}
|
|
}
|
|
|
|
/* Drain the Link queue */
|
|
if (adapter->tq) {
|
|
taskqueue_drain(adapter->tq, &adapter->link_task);
|
|
taskqueue_drain(adapter->tq, &adapter->mod_task);
|
|
taskqueue_drain(adapter->tq, &adapter->msf_task);
|
|
#ifdef IXGBE_FDIR
|
|
taskqueue_drain(adapter->tq, &adapter->fdir_task);
|
|
#endif
|
|
taskqueue_free(adapter->tq);
|
|
}
|
|
|
|
/* let hardware know driver is unloading */
|
|
ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
|
|
ctrl_ext &= ~IXGBE_CTRL_EXT_DRV_LOAD;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, ctrl_ext);
|
|
|
|
/* Unregister VLAN events */
|
|
if (adapter->vlan_attach != NULL)
|
|
EVENTHANDLER_DEREGISTER(vlan_config, adapter->vlan_attach);
|
|
if (adapter->vlan_detach != NULL)
|
|
EVENTHANDLER_DEREGISTER(vlan_unconfig, adapter->vlan_detach);
|
|
|
|
ether_ifdetach(adapter->ifp);
|
|
callout_drain(&adapter->timer);
|
|
#ifdef DEV_NETMAP
|
|
netmap_detach(adapter->ifp);
|
|
#endif /* DEV_NETMAP */
|
|
ixgbe_free_pci_resources(adapter);
|
|
bus_generic_detach(dev);
|
|
if_free(adapter->ifp);
|
|
|
|
ixgbe_free_transmit_structures(adapter);
|
|
ixgbe_free_receive_structures(adapter);
|
|
free(adapter->mta, M_DEVBUF);
|
|
|
|
IXGBE_CORE_LOCK_DESTROY(adapter);
|
|
return (0);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Shutdown entry point
|
|
*
|
|
**********************************************************************/
|
|
|
|
static int
|
|
ixgbe_shutdown(device_t dev)
|
|
{
|
|
struct adapter *adapter = device_get_softc(dev);
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_stop(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* Ioctl entry point
|
|
*
|
|
* ixgbe_ioctl is called when the user wants to configure the
|
|
* interface.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
**********************************************************************/
|
|
|
|
static int
|
|
ixgbe_ioctl(struct ifnet * ifp, u_long command, caddr_t data)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
#if defined(INET) || defined(INET6)
|
|
struct ifaddr *ifa = (struct ifaddr *)data;
|
|
bool avoid_reset = FALSE;
|
|
#endif
|
|
int error = 0;
|
|
|
|
switch (command) {
|
|
|
|
case SIOCSIFADDR:
|
|
#ifdef INET
|
|
if (ifa->ifa_addr->sa_family == AF_INET)
|
|
avoid_reset = TRUE;
|
|
#endif
|
|
#ifdef INET6
|
|
if (ifa->ifa_addr->sa_family == AF_INET6)
|
|
avoid_reset = TRUE;
|
|
#endif
|
|
#if defined(INET) || defined(INET6)
|
|
/*
|
|
** Calling init results in link renegotiation,
|
|
** so we avoid doing it when possible.
|
|
*/
|
|
if (avoid_reset) {
|
|
ifp->if_flags |= IFF_UP;
|
|
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING))
|
|
ixgbe_init(adapter);
|
|
if (!(ifp->if_flags & IFF_NOARP))
|
|
arp_ifinit(ifp, ifa);
|
|
} else
|
|
error = ether_ioctl(ifp, command, data);
|
|
#endif
|
|
break;
|
|
case SIOCSIFMTU:
|
|
IOCTL_DEBUGOUT("ioctl: SIOCSIFMTU (Set Interface MTU)");
|
|
if (ifr->ifr_mtu > IXGBE_MAX_FRAME_SIZE - ETHER_HDR_LEN) {
|
|
error = EINVAL;
|
|
} else {
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ifp->if_mtu = ifr->ifr_mtu;
|
|
adapter->max_frame_size =
|
|
ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
|
|
ixgbe_init_locked(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
}
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
IOCTL_DEBUGOUT("ioctl: SIOCSIFFLAGS (Set Interface Flags)");
|
|
IXGBE_CORE_LOCK(adapter);
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING)) {
|
|
if ((ifp->if_flags ^ adapter->if_flags) &
|
|
(IFF_PROMISC | IFF_ALLMULTI)) {
|
|
ixgbe_set_promisc(adapter);
|
|
}
|
|
} else
|
|
ixgbe_init_locked(adapter);
|
|
} else
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
ixgbe_stop(adapter);
|
|
adapter->if_flags = ifp->if_flags;
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
IOCTL_DEBUGOUT("ioctl: SIOC(ADD|DEL)MULTI");
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_disable_intr(adapter);
|
|
ixgbe_set_multi(adapter);
|
|
ixgbe_enable_intr(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
}
|
|
break;
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
IOCTL_DEBUGOUT("ioctl: SIOCxIFMEDIA (Get/Set Interface Media)");
|
|
error = ifmedia_ioctl(ifp, ifr, &adapter->media, command);
|
|
break;
|
|
case SIOCSIFCAP:
|
|
{
|
|
int mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
IOCTL_DEBUGOUT("ioctl: SIOCSIFCAP (Set Capabilities)");
|
|
if (mask & IFCAP_HWCSUM)
|
|
ifp->if_capenable ^= IFCAP_HWCSUM;
|
|
if (mask & IFCAP_TSO4)
|
|
ifp->if_capenable ^= IFCAP_TSO4;
|
|
if (mask & IFCAP_TSO6)
|
|
ifp->if_capenable ^= IFCAP_TSO6;
|
|
if (mask & IFCAP_LRO)
|
|
ifp->if_capenable ^= IFCAP_LRO;
|
|
if (mask & IFCAP_VLAN_HWTAGGING)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
|
|
if (mask & IFCAP_VLAN_HWFILTER)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWFILTER;
|
|
if (mask & IFCAP_VLAN_HWTSO)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTSO;
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_init_locked(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
}
|
|
VLAN_CAPABILITIES(ifp);
|
|
break;
|
|
}
|
|
#if __FreeBSD_version >= 1100036
|
|
case SIOCGI2C:
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ifi2creq i2c;
|
|
int i;
|
|
IOCTL_DEBUGOUT("ioctl: SIOCGI2C (Get I2C Data)");
|
|
error = copyin(ifr->ifr_data, &i2c, sizeof(i2c));
|
|
if (error != 0)
|
|
break;
|
|
if (i2c.dev_addr != 0xA0 && i2c.dev_addr != 0xA2) {
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
if (i2c.len > sizeof(i2c.data)) {
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
for (i = 0; i < i2c.len; i++)
|
|
hw->phy.ops.read_i2c_byte(hw, i2c.offset + i,
|
|
i2c.dev_addr, &i2c.data[i]);
|
|
error = copyout(&i2c, ifr->ifr_data, sizeof(i2c));
|
|
break;
|
|
}
|
|
#endif
|
|
default:
|
|
IOCTL_DEBUGOUT1("ioctl: UNKNOWN (0x%X)\n", (int)command);
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Init entry point
|
|
*
|
|
* This routine is used in two ways. It is used by the stack as
|
|
* init entry point in network interface structure. It is also used
|
|
* by the driver as a hw/sw initialization routine to get to a
|
|
* consistent state.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
**********************************************************************/
|
|
#define IXGBE_MHADD_MFS_SHIFT 16
|
|
|
|
static void
|
|
ixgbe_init_locked(struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp = adapter->ifp;
|
|
device_t dev = adapter->dev;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 k, txdctl, mhadd, gpie;
|
|
u32 rxdctl, rxctrl;
|
|
|
|
mtx_assert(&adapter->core_mtx, MA_OWNED);
|
|
INIT_DEBUGOUT("ixgbe_init_locked: begin");
|
|
hw->adapter_stopped = FALSE;
|
|
ixgbe_stop_adapter(hw);
|
|
callout_stop(&adapter->timer);
|
|
|
|
/* reprogram the RAR[0] in case user changed it. */
|
|
ixgbe_set_rar(hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV);
|
|
|
|
/* Get the latest mac address, User can use a LAA */
|
|
bcopy(IF_LLADDR(adapter->ifp), hw->mac.addr,
|
|
IXGBE_ETH_LENGTH_OF_ADDRESS);
|
|
ixgbe_set_rar(hw, 0, hw->mac.addr, 0, 1);
|
|
hw->addr_ctrl.rar_used_count = 1;
|
|
|
|
/* Set the various hardware offload abilities */
|
|
ifp->if_hwassist = 0;
|
|
if (ifp->if_capenable & IFCAP_TSO)
|
|
ifp->if_hwassist |= CSUM_TSO;
|
|
if (ifp->if_capenable & IFCAP_TXCSUM) {
|
|
ifp->if_hwassist |= (CSUM_TCP | CSUM_UDP);
|
|
#if __FreeBSD_version >= 800000
|
|
if (hw->mac.type != ixgbe_mac_82598EB)
|
|
ifp->if_hwassist |= CSUM_SCTP;
|
|
#endif
|
|
}
|
|
|
|
/* Prepare transmit descriptors and buffers */
|
|
if (ixgbe_setup_transmit_structures(adapter)) {
|
|
device_printf(dev,"Could not setup transmit structures\n");
|
|
ixgbe_stop(adapter);
|
|
return;
|
|
}
|
|
|
|
ixgbe_init_hw(hw);
|
|
ixgbe_initialize_transmit_units(adapter);
|
|
|
|
/* Setup Multicast table */
|
|
ixgbe_set_multi(adapter);
|
|
|
|
/*
|
|
** Determine the correct mbuf pool
|
|
** for doing jumbo frames
|
|
*/
|
|
if (adapter->max_frame_size <= 2048)
|
|
adapter->rx_mbuf_sz = MCLBYTES;
|
|
else if (adapter->max_frame_size <= 4096)
|
|
adapter->rx_mbuf_sz = MJUMPAGESIZE;
|
|
else if (adapter->max_frame_size <= 9216)
|
|
adapter->rx_mbuf_sz = MJUM9BYTES;
|
|
else
|
|
adapter->rx_mbuf_sz = MJUM16BYTES;
|
|
|
|
/* Prepare receive descriptors and buffers */
|
|
if (ixgbe_setup_receive_structures(adapter)) {
|
|
device_printf(dev,"Could not setup receive structures\n");
|
|
ixgbe_stop(adapter);
|
|
return;
|
|
}
|
|
|
|
/* Configure RX settings */
|
|
ixgbe_initialize_receive_units(adapter);
|
|
|
|
gpie = IXGBE_READ_REG(&adapter->hw, IXGBE_GPIE);
|
|
|
|
/* Enable Fan Failure Interrupt */
|
|
gpie |= IXGBE_SDP1_GPIEN_BY_MAC(hw);
|
|
|
|
/* Add for Module detection */
|
|
if (hw->mac.type == ixgbe_mac_82599EB)
|
|
gpie |= IXGBE_SDP2_GPIEN_BY_MAC(hw);
|
|
|
|
/* Thermal Failure Detection */
|
|
if (hw->mac.type == ixgbe_mac_X540)
|
|
gpie |= IXGBE_SDP0_GPIEN_BY_MAC(hw);
|
|
|
|
if (adapter->msix > 1) {
|
|
/* Enable Enhanced MSIX mode */
|
|
gpie |= IXGBE_GPIE_MSIX_MODE;
|
|
gpie |= IXGBE_GPIE_EIAME | IXGBE_GPIE_PBA_SUPPORT |
|
|
IXGBE_GPIE_OCD;
|
|
}
|
|
IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
|
|
|
|
/* Set MTU size */
|
|
if (ifp->if_mtu > ETHERMTU) {
|
|
mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD);
|
|
mhadd &= ~IXGBE_MHADD_MFS_MASK;
|
|
mhadd |= adapter->max_frame_size << IXGBE_MHADD_MFS_SHIFT;
|
|
IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd);
|
|
}
|
|
|
|
/* Now enable all the queues */
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
|
|
txdctl |= IXGBE_TXDCTL_ENABLE;
|
|
/* Set WTHRESH to 8, burst writeback */
|
|
txdctl |= (8 << 16);
|
|
/*
|
|
* When the internal queue falls below PTHRESH (32),
|
|
* start prefetching as long as there are at least
|
|
* HTHRESH (1) buffers ready. The values are taken
|
|
* from the Intel linux driver 3.8.21.
|
|
* Prefetching enables tx line rate even with 1 queue.
|
|
*/
|
|
txdctl |= (32 << 0) | (1 << 8);
|
|
IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), txdctl);
|
|
}
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
/*
|
|
** PTHRESH = 21
|
|
** HTHRESH = 4
|
|
** WTHRESH = 8
|
|
*/
|
|
rxdctl &= ~0x3FFFFF;
|
|
rxdctl |= 0x080420;
|
|
}
|
|
rxdctl |= IXGBE_RXDCTL_ENABLE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), rxdctl);
|
|
for (k = 0; k < 10; k++) {
|
|
if (IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)) &
|
|
IXGBE_RXDCTL_ENABLE)
|
|
break;
|
|
else
|
|
msec_delay(1);
|
|
}
|
|
wmb();
|
|
#ifdef DEV_NETMAP
|
|
/*
|
|
* In netmap mode, we must preserve the buffers made
|
|
* available to userspace before the if_init()
|
|
* (this is true by default on the TX side, because
|
|
* init makes all buffers available to userspace).
|
|
*
|
|
* netmap_reset() and the device specific routines
|
|
* (e.g. ixgbe_setup_receive_rings()) map these
|
|
* buffers at the end of the NIC ring, so here we
|
|
* must set the RDT (tail) register to make sure
|
|
* they are not overwritten.
|
|
*
|
|
* In this driver the NIC ring starts at RDH = 0,
|
|
* RDT points to the last slot available for reception (?),
|
|
* so RDT = num_rx_desc - 1 means the whole ring is available.
|
|
*/
|
|
if (ifp->if_capenable & IFCAP_NETMAP) {
|
|
struct netmap_adapter *na = NA(adapter->ifp);
|
|
struct netmap_kring *kring = &na->rx_rings[i];
|
|
int t = na->num_rx_desc - 1 - nm_kr_rxspace(kring);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDT(i), t);
|
|
} else
|
|
#endif /* DEV_NETMAP */
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDT(i), adapter->num_rx_desc - 1);
|
|
}
|
|
|
|
/* Enable Receive engine */
|
|
rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
rxctrl |= IXGBE_RXCTRL_DMBYPS;
|
|
rxctrl |= IXGBE_RXCTRL_RXEN;
|
|
ixgbe_enable_rx_dma(hw, rxctrl);
|
|
|
|
callout_reset(&adapter->timer, hz, ixgbe_local_timer, adapter);
|
|
|
|
/* Set up MSI/X routing */
|
|
if (ixgbe_enable_msix) {
|
|
ixgbe_configure_ivars(adapter);
|
|
/* Set up auto-mask */
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
|
|
else {
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(0), 0xFFFFFFFF);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(1), 0xFFFFFFFF);
|
|
}
|
|
} else { /* Simple settings for Legacy/MSI */
|
|
ixgbe_set_ivar(adapter, 0, 0, 0);
|
|
ixgbe_set_ivar(adapter, 0, 0, 1);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
|
|
}
|
|
|
|
#ifdef IXGBE_FDIR
|
|
/* Init Flow director */
|
|
if (hw->mac.type != ixgbe_mac_82598EB) {
|
|
u32 hdrm = 32 << fdir_pballoc;
|
|
|
|
hw->mac.ops.setup_rxpba(hw, 0, hdrm, PBA_STRATEGY_EQUAL);
|
|
ixgbe_init_fdir_signature_82599(&adapter->hw, fdir_pballoc);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
** Check on any SFP devices that
|
|
** need to be kick-started
|
|
*/
|
|
if (hw->phy.type == ixgbe_phy_none) {
|
|
int err = hw->phy.ops.identify(hw);
|
|
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,
|
|
"Unsupported SFP+ module type was detected.\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Set moderation on the Link interrupt */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EITR(adapter->vector), IXGBE_LINK_ITR);
|
|
|
|
/* Config/Enable Link */
|
|
ixgbe_config_link(adapter);
|
|
|
|
/* Hardware Packet Buffer & Flow Control setup */
|
|
{
|
|
u32 rxpb, frame, size, tmp;
|
|
|
|
frame = adapter->max_frame_size;
|
|
|
|
/* Calculate High Water */
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_X540:
|
|
case ixgbe_mac_X550:
|
|
case ixgbe_mac_X550EM_a:
|
|
case ixgbe_mac_X550EM_x:
|
|
tmp = IXGBE_DV_X540(frame, frame);
|
|
break;
|
|
default:
|
|
tmp = IXGBE_DV(frame, frame);
|
|
break;
|
|
}
|
|
size = IXGBE_BT2KB(tmp);
|
|
rxpb = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0)) >> 10;
|
|
hw->fc.high_water[0] = rxpb - size;
|
|
|
|
/* Now calculate Low Water */
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_X540:
|
|
case ixgbe_mac_X550:
|
|
case ixgbe_mac_X550EM_a:
|
|
case ixgbe_mac_X550EM_x:
|
|
tmp = IXGBE_LOW_DV_X540(frame);
|
|
break;
|
|
default:
|
|
tmp = IXGBE_LOW_DV(frame);
|
|
break;
|
|
}
|
|
hw->fc.low_water[0] = IXGBE_BT2KB(tmp);
|
|
|
|
hw->fc.requested_mode = adapter->fc;
|
|
hw->fc.pause_time = IXGBE_FC_PAUSE;
|
|
hw->fc.send_xon = TRUE;
|
|
}
|
|
/* Initialize the FC settings */
|
|
ixgbe_start_hw(hw);
|
|
|
|
/* Set up VLAN support and filter */
|
|
ixgbe_setup_vlan_hw_support(adapter);
|
|
|
|
/* And now turn on interrupts */
|
|
ixgbe_enable_intr(adapter);
|
|
|
|
/* Now inform the stack we're ready */
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixgbe_init(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_init_locked(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
**
|
|
** MSIX Interrupt Handlers and Tasklets
|
|
**
|
|
*/
|
|
|
|
static inline void
|
|
ixgbe_enable_queue(struct adapter *adapter, u32 vector)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u64 queue = (u64)(1 << vector);
|
|
u32 mask;
|
|
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & queue);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask);
|
|
} else {
|
|
mask = (queue & 0xFFFFFFFF);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask);
|
|
mask = (queue >> 32);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask);
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
ixgbe_disable_queue(struct adapter *adapter, u32 vector)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u64 queue = (u64)(1 << vector);
|
|
u32 mask;
|
|
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & queue);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC, mask);
|
|
} else {
|
|
mask = (queue & 0xFFFFFFFF);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(0), mask);
|
|
mask = (queue >> 32);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(1), mask);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ixgbe_handle_que(void *context, int pending)
|
|
{
|
|
struct ix_queue *que = context;
|
|
struct adapter *adapter = que->adapter;
|
|
struct tx_ring *txr = que->txr;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
bool more;
|
|
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
more = ixgbe_rxeof(que);
|
|
IXGBE_TX_LOCK(txr);
|
|
ixgbe_txeof(txr);
|
|
#ifndef IXGBE_LEGACY_TX
|
|
if (!drbr_empty(ifp, txr->br))
|
|
ixgbe_mq_start_locked(ifp, txr);
|
|
#else
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
ixgbe_start_locked(txr, ifp);
|
|
#endif
|
|
IXGBE_TX_UNLOCK(txr);
|
|
}
|
|
|
|
/* Reenable this interrupt */
|
|
if (que->res != NULL)
|
|
ixgbe_enable_queue(adapter, que->msix);
|
|
else
|
|
ixgbe_enable_intr(adapter);
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Legacy Interrupt Service routine
|
|
*
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixgbe_legacy_irq(void *arg)
|
|
{
|
|
struct ix_queue *que = arg;
|
|
struct adapter *adapter = que->adapter;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
bool more;
|
|
u32 reg_eicr;
|
|
|
|
|
|
reg_eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
|
|
|
|
++que->irqs;
|
|
if (reg_eicr == 0) {
|
|
ixgbe_enable_intr(adapter);
|
|
return;
|
|
}
|
|
|
|
more = ixgbe_rxeof(que);
|
|
|
|
IXGBE_TX_LOCK(txr);
|
|
ixgbe_txeof(txr);
|
|
#ifdef IXGBE_LEGACY_TX
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
ixgbe_start_locked(txr, ifp);
|
|
#else
|
|
if (!drbr_empty(ifp, txr->br))
|
|
ixgbe_mq_start_locked(ifp, txr);
|
|
#endif
|
|
IXGBE_TX_UNLOCK(txr);
|
|
|
|
/* Check for fan failure */
|
|
if ((hw->phy.media_type == ixgbe_media_type_copper) &&
|
|
(reg_eicr & IXGBE_EICR_GPI_SDP1_BY_MAC(hw))) {
|
|
device_printf(adapter->dev, "\nCRITICAL: FAN FAILURE!! "
|
|
"REPLACE IMMEDIATELY!!\n");
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EICR_GPI_SDP1_BY_MAC(hw));
|
|
}
|
|
|
|
/* Link status change */
|
|
if (reg_eicr & IXGBE_EICR_LSC)
|
|
taskqueue_enqueue(adapter->tq, &adapter->link_task);
|
|
|
|
if (more)
|
|
taskqueue_enqueue(que->tq, &que->que_task);
|
|
else
|
|
ixgbe_enable_intr(adapter);
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* MSIX Queue Interrupt Service routine
|
|
*
|
|
**********************************************************************/
|
|
void
|
|
ixgbe_msix_que(void *arg)
|
|
{
|
|
struct ix_queue *que = arg;
|
|
struct adapter *adapter = que->adapter;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
struct tx_ring *txr = que->txr;
|
|
struct rx_ring *rxr = que->rxr;
|
|
bool more;
|
|
u32 newitr = 0;
|
|
|
|
/* Protect against spurious interrupts */
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
return;
|
|
|
|
ixgbe_disable_queue(adapter, que->msix);
|
|
++que->irqs;
|
|
|
|
more = ixgbe_rxeof(que);
|
|
|
|
IXGBE_TX_LOCK(txr);
|
|
ixgbe_txeof(txr);
|
|
#ifdef IXGBE_LEGACY_TX
|
|
if (!IFQ_DRV_IS_EMPTY(ifp->if_snd))
|
|
ixgbe_start_locked(txr, ifp);
|
|
#else
|
|
if (!drbr_empty(ifp, txr->br))
|
|
ixgbe_mq_start_locked(ifp, txr);
|
|
#endif
|
|
IXGBE_TX_UNLOCK(txr);
|
|
|
|
/* Do AIM now? */
|
|
|
|
if (ixgbe_enable_aim == FALSE)
|
|
goto no_calc;
|
|
/*
|
|
** Do Adaptive Interrupt Moderation:
|
|
** - Write out last calculated setting
|
|
** - Calculate based on average size over
|
|
** the last interval.
|
|
*/
|
|
if (que->eitr_setting)
|
|
IXGBE_WRITE_REG(&adapter->hw,
|
|
IXGBE_EITR(que->msix), que->eitr_setting);
|
|
|
|
que->eitr_setting = 0;
|
|
|
|
/* Idle, do nothing */
|
|
if ((txr->bytes == 0) && (rxr->bytes == 0))
|
|
goto no_calc;
|
|
|
|
if ((txr->bytes) && (txr->packets))
|
|
newitr = txr->bytes/txr->packets;
|
|
if ((rxr->bytes) && (rxr->packets))
|
|
newitr = max(newitr,
|
|
(rxr->bytes / rxr->packets));
|
|
newitr += 24; /* account for hardware frame, crc */
|
|
|
|
/* set an upper boundary */
|
|
newitr = min(newitr, 3000);
|
|
|
|
/* Be nice to the mid range */
|
|
if ((newitr > 300) && (newitr < 1200))
|
|
newitr = (newitr / 3);
|
|
else
|
|
newitr = (newitr / 2);
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB)
|
|
newitr |= newitr << 16;
|
|
else
|
|
newitr |= IXGBE_EITR_CNT_WDIS;
|
|
|
|
/* save for next interrupt */
|
|
que->eitr_setting = newitr;
|
|
|
|
/* Reset state */
|
|
txr->bytes = 0;
|
|
txr->packets = 0;
|
|
rxr->bytes = 0;
|
|
rxr->packets = 0;
|
|
|
|
no_calc:
|
|
if (more)
|
|
taskqueue_enqueue(que->tq, &que->que_task);
|
|
else
|
|
ixgbe_enable_queue(adapter, que->msix);
|
|
return;
|
|
}
|
|
|
|
|
|
static void
|
|
ixgbe_msix_link(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 reg_eicr;
|
|
|
|
++adapter->vector_irq;
|
|
|
|
/* First get the cause */
|
|
reg_eicr = IXGBE_READ_REG(hw, IXGBE_EICS);
|
|
/* Be sure the queue bits are not cleared */
|
|
reg_eicr &= ~IXGBE_EICR_RTX_QUEUE;
|
|
/* Clear interrupt with write */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, reg_eicr);
|
|
|
|
/* Link status change */
|
|
if (reg_eicr & IXGBE_EICR_LSC)
|
|
taskqueue_enqueue(adapter->tq, &adapter->link_task);
|
|
|
|
if (adapter->hw.mac.type != ixgbe_mac_82598EB) {
|
|
#ifdef IXGBE_FDIR
|
|
if (reg_eicr & IXGBE_EICR_FLOW_DIR) {
|
|
/* This is probably overkill :) */
|
|
if (!atomic_cmpset_int(&adapter->fdir_reinit, 0, 1))
|
|
return;
|
|
/* Disable the interrupt */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EICR_FLOW_DIR);
|
|
taskqueue_enqueue(adapter->tq, &adapter->fdir_task);
|
|
} else
|
|
#endif
|
|
if (reg_eicr & IXGBE_EICR_ECC) {
|
|
device_printf(adapter->dev, "\nCRITICAL: ECC ERROR!! "
|
|
"Please Reboot!!\n");
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC);
|
|
} else
|
|
|
|
if (ixgbe_is_sfp(hw)) {
|
|
if (reg_eicr & IXGBE_EICR_GPI_SDP1) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1_BY_MAC(hw));
|
|
taskqueue_enqueue(adapter->tq, &adapter->msf_task);
|
|
} else if (reg_eicr & IXGBE_EICR_GPI_SDP2) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2_BY_MAC(hw));
|
|
taskqueue_enqueue(adapter->tq, &adapter->mod_task);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Check for fan failure */
|
|
if ((hw->device_id == IXGBE_DEV_ID_82598AT) &&
|
|
(reg_eicr & IXGBE_EICR_GPI_SDP1_BY_MAC(hw))) {
|
|
device_printf(adapter->dev, "\nCRITICAL: FAN FAILURE!! "
|
|
"REPLACE IMMEDIATELY!!\n");
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1_BY_MAC(hw));
|
|
}
|
|
|
|
/* Check for over temp condition */
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_X540:
|
|
case ixgbe_mac_X550:
|
|
case ixgbe_mac_X550EM_a:
|
|
if (reg_eicr & IXGBE_EICR_TS) {
|
|
device_printf(adapter->dev, "\nCRITICAL: OVER TEMP!! "
|
|
"PHY IS SHUT DOWN!!\n");
|
|
device_printf(adapter->dev, "System shutdown required\n");
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_TS);
|
|
}
|
|
break;
|
|
default:
|
|
/* Other MACs have no thermal sensor interrupt */
|
|
break;
|
|
}
|
|
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, IXGBE_EIMS_OTHER);
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Media Ioctl callback
|
|
*
|
|
* This routine is called whenever the user queries the status of
|
|
* the interface using ifconfig.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_media_status(struct ifnet * ifp, struct ifmediareq * ifmr)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int layer;
|
|
|
|
INIT_DEBUGOUT("ixgbe_media_status: begin");
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_update_link_status(adapter);
|
|
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
|
|
if (!adapter->link_active) {
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
return;
|
|
}
|
|
|
|
ifmr->ifm_status |= IFM_ACTIVE;
|
|
layer = ixgbe_get_supported_physical_layer(hw);
|
|
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_T ||
|
|
layer & IXGBE_PHYSICAL_LAYER_1000BASE_T ||
|
|
layer & IXGBE_PHYSICAL_LAYER_100BASE_TX)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_T | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_T | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_100_FULL:
|
|
ifmr->ifm_active |= IFM_100_TX | IFM_FDX;
|
|
break;
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU ||
|
|
layer & IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_TWINAX | IFM_FDX;
|
|
break;
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_LR)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_LR | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_LX | IFM_FDX;
|
|
break;
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_LRM)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_LRM | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_LX | IFM_FDX;
|
|
break;
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_SR ||
|
|
layer & IXGBE_PHYSICAL_LAYER_1000BASE_SX)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_SR | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_SX | IFM_FDX;
|
|
break;
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_CX4)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_CX4 | IFM_FDX;
|
|
break;
|
|
}
|
|
/*
|
|
** XXX: These need to use the proper media types once
|
|
** they're added.
|
|
*/
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_KR)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10_T | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_10_5 | IFM_FDX;
|
|
break;
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_KX4
|
|
|| layer & IXGBE_PHYSICAL_LAYER_1000BASE_KX)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10_2 | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_10_5 | IFM_FDX;
|
|
break;
|
|
}
|
|
|
|
/* If nothing is recognized... */
|
|
if (IFM_SUBTYPE(ifmr->ifm_active) == 0)
|
|
ifmr->ifm_active |= IFM_UNKNOWN;
|
|
|
|
#if __FreeBSD_version >= 900025
|
|
/* Flow control setting */
|
|
if (adapter->fc == ixgbe_fc_rx_pause || adapter->fc == ixgbe_fc_full)
|
|
ifmr->ifm_active |= IFM_ETH_RXPAUSE;
|
|
if (adapter->fc == ixgbe_fc_tx_pause || adapter->fc == ixgbe_fc_full)
|
|
ifmr->ifm_active |= IFM_ETH_TXPAUSE;
|
|
#endif
|
|
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Media Ioctl callback
|
|
*
|
|
* This routine is called when the user changes speed/duplex using
|
|
* media/mediopt option with ifconfig.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_media_change(struct ifnet * ifp)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct ifmedia *ifm = &adapter->media;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
ixgbe_link_speed speed = 0;
|
|
|
|
INIT_DEBUGOUT("ixgbe_media_change: begin");
|
|
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
|
|
return (EINVAL);
|
|
|
|
/*
|
|
** We don't actually need to check against the supported
|
|
** media types of the adapter; ifmedia will take care of
|
|
** that for us.
|
|
** NOTE: this relies on falling thru the switch
|
|
** to get all the values set, it can be confusing.
|
|
*/
|
|
switch (IFM_SUBTYPE(ifm->ifm_media)) {
|
|
case IFM_AUTO:
|
|
case IFM_10G_T:
|
|
speed |= IXGBE_LINK_SPEED_100_FULL;
|
|
case IFM_10G_LRM:
|
|
case IFM_10G_SR: /* KR, too */
|
|
case IFM_10G_LR:
|
|
case IFM_10G_CX4: /* KX4 for now */
|
|
speed |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
case IFM_10G_TWINAX:
|
|
speed |= IXGBE_LINK_SPEED_10GB_FULL;
|
|
break;
|
|
case IFM_1000_T:
|
|
speed |= IXGBE_LINK_SPEED_100_FULL;
|
|
case IFM_1000_LX:
|
|
case IFM_1000_SX:
|
|
case IFM_1000_CX: /* KX until there's real support */
|
|
speed |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
break;
|
|
case IFM_100_TX:
|
|
speed |= IXGBE_LINK_SPEED_100_FULL;
|
|
break;
|
|
default:
|
|
goto invalid;
|
|
}
|
|
|
|
hw->mac.autotry_restart = TRUE;
|
|
hw->mac.ops.setup_link(hw, speed, TRUE);
|
|
adapter->advertise =
|
|
((speed & IXGBE_LINK_SPEED_10GB_FULL) << 2) |
|
|
((speed & IXGBE_LINK_SPEED_1GB_FULL) << 1) |
|
|
((speed & IXGBE_LINK_SPEED_100_FULL) << 0);
|
|
|
|
return (0);
|
|
|
|
invalid:
|
|
device_printf(adapter->dev, "Invalid media type\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
static void
|
|
ixgbe_set_promisc(struct adapter *adapter)
|
|
{
|
|
u_int32_t reg_rctl;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
int mcnt = 0;
|
|
|
|
reg_rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
|
|
reg_rctl &= (~IXGBE_FCTRL_UPE);
|
|
if (ifp->if_flags & IFF_ALLMULTI)
|
|
mcnt = MAX_NUM_MULTICAST_ADDRESSES;
|
|
else {
|
|
struct ifmultiaddr *ifma;
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_LOCK(ifp);
|
|
#else
|
|
if_maddr_rlock(ifp);
|
|
#endif
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
if (mcnt == MAX_NUM_MULTICAST_ADDRESSES)
|
|
break;
|
|
mcnt++;
|
|
}
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_UNLOCK(ifp);
|
|
#else
|
|
if_maddr_runlock(ifp);
|
|
#endif
|
|
}
|
|
if (mcnt < MAX_NUM_MULTICAST_ADDRESSES)
|
|
reg_rctl &= (~IXGBE_FCTRL_MPE);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_rctl);
|
|
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
reg_rctl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_rctl);
|
|
} else if (ifp->if_flags & IFF_ALLMULTI) {
|
|
reg_rctl |= IXGBE_FCTRL_MPE;
|
|
reg_rctl &= ~IXGBE_FCTRL_UPE;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_rctl);
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* Multicast Update
|
|
*
|
|
* This routine is called whenever multicast address list is updated.
|
|
*
|
|
**********************************************************************/
|
|
#define IXGBE_RAR_ENTRIES 16
|
|
|
|
static void
|
|
ixgbe_set_multi(struct adapter *adapter)
|
|
{
|
|
u32 fctrl;
|
|
u8 *mta;
|
|
u8 *update_ptr;
|
|
struct ifmultiaddr *ifma;
|
|
int mcnt = 0;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
|
|
IOCTL_DEBUGOUT("ixgbe_set_multi: begin");
|
|
|
|
mta = adapter->mta;
|
|
bzero(mta, sizeof(u8) * IXGBE_ETH_LENGTH_OF_ADDRESS *
|
|
MAX_NUM_MULTICAST_ADDRESSES);
|
|
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_LOCK(ifp);
|
|
#else
|
|
if_maddr_rlock(ifp);
|
|
#endif
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
if (mcnt == MAX_NUM_MULTICAST_ADDRESSES)
|
|
break;
|
|
bcopy(LLADDR((struct sockaddr_dl *) ifma->ifma_addr),
|
|
&mta[mcnt * IXGBE_ETH_LENGTH_OF_ADDRESS],
|
|
IXGBE_ETH_LENGTH_OF_ADDRESS);
|
|
mcnt++;
|
|
}
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_UNLOCK(ifp);
|
|
#else
|
|
if_maddr_runlock(ifp);
|
|
#endif
|
|
|
|
fctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
|
|
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
else if (mcnt >= MAX_NUM_MULTICAST_ADDRESSES ||
|
|
ifp->if_flags & IFF_ALLMULTI) {
|
|
fctrl |= IXGBE_FCTRL_MPE;
|
|
fctrl &= ~IXGBE_FCTRL_UPE;
|
|
} else
|
|
fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, fctrl);
|
|
|
|
if (mcnt < MAX_NUM_MULTICAST_ADDRESSES) {
|
|
update_ptr = mta;
|
|
ixgbe_update_mc_addr_list(&adapter->hw,
|
|
update_ptr, mcnt, ixgbe_mc_array_itr, TRUE);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* This is an iterator function now needed by the multicast
|
|
* shared code. It simply feeds the shared code routine the
|
|
* addresses in the array of ixgbe_set_multi() one by one.
|
|
*/
|
|
static u8 *
|
|
ixgbe_mc_array_itr(struct ixgbe_hw *hw, u8 **update_ptr, u32 *vmdq)
|
|
{
|
|
u8 *addr = *update_ptr;
|
|
u8 *newptr;
|
|
*vmdq = 0;
|
|
|
|
newptr = addr + IXGBE_ETH_LENGTH_OF_ADDRESS;
|
|
*update_ptr = newptr;
|
|
return addr;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* Timer routine
|
|
*
|
|
* This routine checks for link status,updates statistics,
|
|
* and runs the watchdog check.
|
|
*
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixgbe_local_timer(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
device_t dev = adapter->dev;
|
|
struct ix_queue *que = adapter->queues;
|
|
u64 queues = 0;
|
|
int hung = 0;
|
|
|
|
mtx_assert(&adapter->core_mtx, MA_OWNED);
|
|
|
|
/* Check for pluggable optics */
|
|
if (adapter->sfp_probe)
|
|
if (!ixgbe_sfp_probe(adapter))
|
|
goto out; /* Nothing to do */
|
|
|
|
ixgbe_update_link_status(adapter);
|
|
ixgbe_update_stats_counters(adapter);
|
|
|
|
/*
|
|
** Check the TX queues status
|
|
** - mark hung queues so we don't schedule on them
|
|
** - watchdog only if all queues show hung
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++, que++) {
|
|
/* Keep track of queues with work for soft irq */
|
|
if (que->txr->busy)
|
|
queues |= ((u64)1 << que->me);
|
|
/*
|
|
** Each time txeof runs without cleaning, but there
|
|
** are uncleaned descriptors it increments busy. If
|
|
** we get to the MAX we declare it hung.
|
|
*/
|
|
if (que->busy == IXGBE_QUEUE_HUNG) {
|
|
++hung;
|
|
/* Mark the queue as inactive */
|
|
adapter->active_queues &= ~((u64)1 << que->me);
|
|
continue;
|
|
} else {
|
|
/* Check if we've come back from hung */
|
|
if ((adapter->active_queues & ((u64)1 << que->me)) == 0)
|
|
adapter->active_queues |= ((u64)1 << que->me);
|
|
}
|
|
if (que->busy >= IXGBE_MAX_TX_BUSY) {
|
|
device_printf(dev,"Warning queue %d "
|
|
"appears to be hung!\n", i);
|
|
que->txr->busy = IXGBE_QUEUE_HUNG;
|
|
++hung;
|
|
}
|
|
|
|
}
|
|
|
|
/* Only truly watchdog if all queues show hung */
|
|
if (hung == adapter->num_queues)
|
|
goto watchdog;
|
|
else if (queues != 0) { /* Force an IRQ on queues with work */
|
|
ixgbe_rearm_queues(adapter, queues);
|
|
}
|
|
|
|
out:
|
|
callout_reset(&adapter->timer, hz, ixgbe_local_timer, adapter);
|
|
return;
|
|
|
|
watchdog:
|
|
device_printf(adapter->dev, "Watchdog timeout -- resetting\n");
|
|
adapter->ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
adapter->watchdog_events++;
|
|
ixgbe_init_locked(adapter);
|
|
}
|
|
|
|
/*
|
|
** Note: this routine updates the OS on the link state
|
|
** the real check of the hardware only happens with
|
|
** a link interrupt.
|
|
*/
|
|
static void
|
|
ixgbe_update_link_status(struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp = adapter->ifp;
|
|
device_t dev = adapter->dev;
|
|
|
|
|
|
if (adapter->link_up){
|
|
if (adapter->link_active == FALSE) {
|
|
if (bootverbose)
|
|
device_printf(dev,"Link is up %d Gbps %s \n",
|
|
((adapter->link_speed == 128)? 10:1),
|
|
"Full Duplex");
|
|
adapter->link_active = TRUE;
|
|
/* Update any Flow Control changes */
|
|
ixgbe_fc_enable(&adapter->hw);
|
|
if_link_state_change(ifp, LINK_STATE_UP);
|
|
}
|
|
} else { /* Link down */
|
|
if (adapter->link_active == TRUE) {
|
|
if (bootverbose)
|
|
device_printf(dev,"Link is Down\n");
|
|
if_link_state_change(ifp, LINK_STATE_DOWN);
|
|
adapter->link_active = FALSE;
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* This routine disables all traffic on the adapter by issuing a
|
|
* global reset on the MAC and deallocates TX/RX buffers.
|
|
*
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixgbe_stop(void *arg)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct adapter *adapter = arg;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
ifp = adapter->ifp;
|
|
|
|
mtx_assert(&adapter->core_mtx, MA_OWNED);
|
|
|
|
INIT_DEBUGOUT("ixgbe_stop: begin\n");
|
|
ixgbe_disable_intr(adapter);
|
|
callout_stop(&adapter->timer);
|
|
|
|
/* Let the stack know...*/
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
|
|
ixgbe_reset_hw(hw);
|
|
hw->adapter_stopped = FALSE;
|
|
ixgbe_stop_adapter(hw);
|
|
if (hw->mac.type == ixgbe_mac_82599EB)
|
|
ixgbe_stop_mac_link_on_d3_82599(hw);
|
|
/* Turn off the laser - noop with no optics */
|
|
ixgbe_disable_tx_laser(hw);
|
|
|
|
/* Update the stack */
|
|
adapter->link_up = FALSE;
|
|
ixgbe_update_link_status(adapter);
|
|
|
|
/* reprogram the RAR[0] in case user changed it. */
|
|
ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Determine hardware revision.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_identify_hardware(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
/* Save off the information about this board */
|
|
hw->vendor_id = pci_get_vendor(dev);
|
|
hw->device_id = pci_get_device(dev);
|
|
hw->revision_id = pci_read_config(dev, PCIR_REVID, 1);
|
|
hw->subsystem_vendor_id =
|
|
pci_read_config(dev, PCIR_SUBVEND_0, 2);
|
|
hw->subsystem_device_id =
|
|
pci_read_config(dev, PCIR_SUBDEV_0, 2);
|
|
|
|
/*
|
|
** Make sure BUSMASTER is set
|
|
*/
|
|
pci_enable_busmaster(dev);
|
|
|
|
/* We need this here to set the num_segs below */
|
|
ixgbe_set_mac_type(hw);
|
|
|
|
/* Pick up the 82599 and VF settings */
|
|
if (hw->mac.type != ixgbe_mac_82598EB) {
|
|
hw->phy.smart_speed = ixgbe_smart_speed;
|
|
adapter->num_segs = IXGBE_82599_SCATTER;
|
|
} else
|
|
adapter->num_segs = IXGBE_82598_SCATTER;
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Determine optic type
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_setup_optics(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int layer;
|
|
|
|
layer = ixgbe_get_supported_physical_layer(hw);
|
|
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_T) {
|
|
adapter->optics = IFM_10G_T;
|
|
return;
|
|
}
|
|
|
|
if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_T) {
|
|
adapter->optics = IFM_1000_T;
|
|
return;
|
|
}
|
|
|
|
if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_SX) {
|
|
adapter->optics = IFM_1000_SX;
|
|
return;
|
|
}
|
|
|
|
if (layer & (IXGBE_PHYSICAL_LAYER_10GBASE_LR |
|
|
IXGBE_PHYSICAL_LAYER_10GBASE_LRM)) {
|
|
adapter->optics = IFM_10G_LR;
|
|
return;
|
|
}
|
|
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_SR) {
|
|
adapter->optics = IFM_10G_SR;
|
|
return;
|
|
}
|
|
|
|
if (layer & IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU) {
|
|
adapter->optics = IFM_10G_TWINAX;
|
|
return;
|
|
}
|
|
|
|
if (layer & (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
|
|
IXGBE_PHYSICAL_LAYER_10GBASE_CX4)) {
|
|
adapter->optics = IFM_10G_CX4;
|
|
return;
|
|
}
|
|
|
|
/* If we get here just set the default */
|
|
adapter->optics = IFM_ETHER | IFM_AUTO;
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup the Legacy or MSI Interrupt handler
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_allocate_legacy(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct ix_queue *que = adapter->queues;
|
|
#ifndef IXGBE_LEGACY_TX
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
#endif
|
|
int error, rid = 0;
|
|
|
|
/* MSI RID at 1 */
|
|
if (adapter->msix == 1)
|
|
rid = 1;
|
|
|
|
/* We allocate a single interrupt resource */
|
|
adapter->res = bus_alloc_resource_any(dev,
|
|
SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE);
|
|
if (adapter->res == NULL) {
|
|
device_printf(dev, "Unable to allocate bus resource: "
|
|
"interrupt\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Try allocating a fast interrupt and the associated deferred
|
|
* processing contexts.
|
|
*/
|
|
#ifndef IXGBE_LEGACY_TX
|
|
TASK_INIT(&txr->txq_task, 0, ixgbe_deferred_mq_start, txr);
|
|
#endif
|
|
TASK_INIT(&que->que_task, 0, ixgbe_handle_que, que);
|
|
que->tq = taskqueue_create_fast("ixgbe_que", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &que->tq);
|
|
taskqueue_start_threads(&que->tq, 1, PI_NET, "%s ixq",
|
|
device_get_nameunit(adapter->dev));
|
|
|
|
/* Tasklets for Link, SFP and Multispeed Fiber */
|
|
TASK_INIT(&adapter->link_task, 0, ixgbe_handle_link, adapter);
|
|
TASK_INIT(&adapter->mod_task, 0, ixgbe_handle_mod, adapter);
|
|
TASK_INIT(&adapter->msf_task, 0, ixgbe_handle_msf, adapter);
|
|
#ifdef IXGBE_FDIR
|
|
TASK_INIT(&adapter->fdir_task, 0, ixgbe_reinit_fdir, adapter);
|
|
#endif
|
|
adapter->tq = taskqueue_create_fast("ixgbe_link", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &adapter->tq);
|
|
taskqueue_start_threads(&adapter->tq, 1, PI_NET, "%s linkq",
|
|
device_get_nameunit(adapter->dev));
|
|
|
|
if ((error = bus_setup_intr(dev, adapter->res,
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL, ixgbe_legacy_irq,
|
|
que, &adapter->tag)) != 0) {
|
|
device_printf(dev, "Failed to register fast interrupt "
|
|
"handler: %d\n", error);
|
|
taskqueue_free(que->tq);
|
|
taskqueue_free(adapter->tq);
|
|
que->tq = NULL;
|
|
adapter->tq = NULL;
|
|
return (error);
|
|
}
|
|
/* For simplicity in the handlers */
|
|
adapter->active_queues = IXGBE_EIMS_ENABLE_MASK;
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup MSIX Interrupt resources and handlers
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_allocate_msix(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct ix_queue *que = adapter->queues;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
int error, rid, vector = 0;
|
|
int cpu_id = 0;
|
|
#ifdef RSS
|
|
cpuset_t cpu_mask;
|
|
#endif
|
|
|
|
#ifdef RSS
|
|
/*
|
|
* If we're doing RSS, the number of queues needs to
|
|
* match the number of RSS buckets that are configured.
|
|
*
|
|
* + If there's more queues than RSS buckets, we'll end
|
|
* up with queues that get no traffic.
|
|
*
|
|
* + If there's more RSS buckets than queues, we'll end
|
|
* up having multiple RSS buckets map to the same queue,
|
|
* so there'll be some contention.
|
|
*/
|
|
if (adapter->num_queues != rss_getnumbuckets()) {
|
|
device_printf(dev,
|
|
"%s: number of queues (%d) != number of RSS buckets (%d)"
|
|
"; performance will be impacted.\n",
|
|
__func__,
|
|
adapter->num_queues,
|
|
rss_getnumbuckets());
|
|
}
|
|
#endif
|
|
|
|
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, vector++, que++, txr++) {
|
|
rid = vector + 1;
|
|
que->res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
if (que->res == NULL) {
|
|
device_printf(dev,"Unable to allocate"
|
|
" bus resource: que interrupt [%d]\n", vector);
|
|
return (ENXIO);
|
|
}
|
|
/* Set the handler function */
|
|
error = bus_setup_intr(dev, que->res,
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL,
|
|
ixgbe_msix_que, que, &que->tag);
|
|
if (error) {
|
|
que->res = NULL;
|
|
device_printf(dev, "Failed to register QUE handler");
|
|
return (error);
|
|
}
|
|
#if __FreeBSD_version >= 800504
|
|
bus_describe_intr(dev, que->res, que->tag, "que %d", i);
|
|
#endif
|
|
que->msix = vector;
|
|
adapter->active_queues |= (u64)(1 << que->msix);
|
|
#ifdef RSS
|
|
/*
|
|
* The queue ID is used as the RSS layer bucket ID.
|
|
* We look up the queue ID -> RSS CPU ID and select
|
|
* that.
|
|
*/
|
|
cpu_id = rss_getcpu(i % rss_getnumbuckets());
|
|
#else
|
|
/*
|
|
* Bind the msix vector, and thus the
|
|
* rings to the corresponding cpu.
|
|
*
|
|
* This just happens to match the default RSS round-robin
|
|
* bucket -> queue -> CPU allocation.
|
|
*/
|
|
if (adapter->num_queues > 1)
|
|
cpu_id = i;
|
|
#endif
|
|
if (adapter->num_queues > 1)
|
|
bus_bind_intr(dev, que->res, cpu_id);
|
|
|
|
#ifdef RSS
|
|
device_printf(dev,
|
|
"Bound RSS bucket %d to CPU %d\n",
|
|
i, cpu_id);
|
|
#else
|
|
#if 0 // This is too noisy
|
|
device_printf(dev,
|
|
"Bound queue %d to cpu %d\n",
|
|
i, cpu_id);
|
|
#endif
|
|
#endif
|
|
|
|
|
|
#ifndef IXGBE_LEGACY_TX
|
|
TASK_INIT(&txr->txq_task, 0, ixgbe_deferred_mq_start, txr);
|
|
#endif
|
|
TASK_INIT(&que->que_task, 0, ixgbe_handle_que, que);
|
|
que->tq = taskqueue_create_fast("ixgbe_que", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &que->tq);
|
|
#ifdef RSS
|
|
CPU_SETOF(cpu_id, &cpu_mask);
|
|
taskqueue_start_threads_cpuset(&que->tq, 1, PI_NET,
|
|
&cpu_mask,
|
|
"%s (bucket %d)",
|
|
device_get_nameunit(adapter->dev),
|
|
cpu_id);
|
|
#else
|
|
taskqueue_start_threads(&que->tq, 1, PI_NET, "%s que",
|
|
device_get_nameunit(adapter->dev));
|
|
#endif
|
|
}
|
|
|
|
/* and Link */
|
|
rid = vector + 1;
|
|
adapter->res = bus_alloc_resource_any(dev,
|
|
SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE);
|
|
if (!adapter->res) {
|
|
device_printf(dev,"Unable to allocate"
|
|
" bus resource: Link interrupt [%d]\n", rid);
|
|
return (ENXIO);
|
|
}
|
|
/* Set the link handler function */
|
|
error = bus_setup_intr(dev, adapter->res,
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL,
|
|
ixgbe_msix_link, adapter, &adapter->tag);
|
|
if (error) {
|
|
adapter->res = NULL;
|
|
device_printf(dev, "Failed to register LINK handler");
|
|
return (error);
|
|
}
|
|
#if __FreeBSD_version >= 800504
|
|
bus_describe_intr(dev, adapter->res, adapter->tag, "link");
|
|
#endif
|
|
adapter->vector = vector;
|
|
/* Tasklets for Link, SFP and Multispeed Fiber */
|
|
TASK_INIT(&adapter->link_task, 0, ixgbe_handle_link, adapter);
|
|
TASK_INIT(&adapter->mod_task, 0, ixgbe_handle_mod, adapter);
|
|
TASK_INIT(&adapter->msf_task, 0, ixgbe_handle_msf, adapter);
|
|
#ifdef IXGBE_FDIR
|
|
TASK_INIT(&adapter->fdir_task, 0, ixgbe_reinit_fdir, adapter);
|
|
#endif
|
|
adapter->tq = taskqueue_create_fast("ixgbe_link", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &adapter->tq);
|
|
taskqueue_start_threads(&adapter->tq, 1, PI_NET, "%s linkq",
|
|
device_get_nameunit(adapter->dev));
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Setup Either MSI/X or MSI
|
|
*/
|
|
static int
|
|
ixgbe_setup_msix(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
int rid, want, queues, msgs;
|
|
|
|
/* Override by tuneable */
|
|
if (ixgbe_enable_msix == 0)
|
|
goto msi;
|
|
|
|
/* First try MSI/X */
|
|
msgs = pci_msix_count(dev);
|
|
if (msgs == 0)
|
|
goto msi;
|
|
rid = PCIR_BAR(MSIX_82598_BAR);
|
|
adapter->msix_mem = bus_alloc_resource_any(dev,
|
|
SYS_RES_MEMORY, &rid, RF_ACTIVE);
|
|
if (adapter->msix_mem == NULL) {
|
|
rid += 4; /* 82599 maps in higher BAR */
|
|
adapter->msix_mem = bus_alloc_resource_any(dev,
|
|
SYS_RES_MEMORY, &rid, RF_ACTIVE);
|
|
}
|
|
if (adapter->msix_mem == NULL) {
|
|
/* May not be enabled */
|
|
device_printf(adapter->dev,
|
|
"Unable to map MSIX table \n");
|
|
goto msi;
|
|
}
|
|
|
|
/* Figure out a reasonable auto config value */
|
|
queues = (mp_ncpus > (msgs-1)) ? (msgs-1) : mp_ncpus;
|
|
|
|
#ifdef RSS
|
|
/* If we're doing RSS, clamp at the number of RSS buckets */
|
|
if (queues > rss_getnumbuckets())
|
|
queues = rss_getnumbuckets();
|
|
#endif
|
|
|
|
if (ixgbe_num_queues != 0)
|
|
queues = ixgbe_num_queues;
|
|
|
|
/* reflect correct sysctl value */
|
|
ixgbe_num_queues = queues;
|
|
|
|
/*
|
|
** Want one vector (RX/TX pair) per queue
|
|
** plus an additional for Link.
|
|
*/
|
|
want = queues + 1;
|
|
if (msgs >= want)
|
|
msgs = want;
|
|
else {
|
|
device_printf(adapter->dev,
|
|
"MSIX Configuration Problem, "
|
|
"%d vectors but %d queues wanted!\n",
|
|
msgs, want);
|
|
goto msi;
|
|
}
|
|
if ((pci_alloc_msix(dev, &msgs) == 0) && (msgs == want)) {
|
|
device_printf(adapter->dev,
|
|
"Using MSIX interrupts with %d vectors\n", msgs);
|
|
adapter->num_queues = queues;
|
|
return (msgs);
|
|
}
|
|
/*
|
|
** If MSIX alloc failed or provided us with
|
|
** less than needed, free and fall through to MSI
|
|
*/
|
|
pci_release_msi(dev);
|
|
|
|
msi:
|
|
if (adapter->msix_mem != NULL) {
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
rid, adapter->msix_mem);
|
|
adapter->msix_mem = NULL;
|
|
}
|
|
msgs = 1;
|
|
if (pci_alloc_msi(dev, &msgs) == 0) {
|
|
device_printf(adapter->dev,"Using an MSI interrupt\n");
|
|
return (msgs);
|
|
}
|
|
device_printf(adapter->dev,"Using a Legacy interrupt\n");
|
|
return (0);
|
|
}
|
|
|
|
|
|
static int
|
|
ixgbe_allocate_pci_resources(struct adapter *adapter)
|
|
{
|
|
int rid;
|
|
device_t dev = adapter->dev;
|
|
|
|
rid = PCIR_BAR(0);
|
|
adapter->pci_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&rid, RF_ACTIVE);
|
|
|
|
if (!(adapter->pci_mem)) {
|
|
device_printf(dev,"Unable to allocate bus resource: memory\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
adapter->osdep.mem_bus_space_tag =
|
|
rman_get_bustag(adapter->pci_mem);
|
|
adapter->osdep.mem_bus_space_handle =
|
|
rman_get_bushandle(adapter->pci_mem);
|
|
adapter->hw.hw_addr = (u8 *) &adapter->osdep.mem_bus_space_handle;
|
|
|
|
/* Legacy defaults */
|
|
adapter->num_queues = 1;
|
|
adapter->hw.back = &adapter->osdep;
|
|
|
|
/*
|
|
** Now setup MSI or MSI/X, should
|
|
** return us the number of supported
|
|
** vectors. (Will be 1 for MSI)
|
|
*/
|
|
adapter->msix = ixgbe_setup_msix(adapter);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ixgbe_free_pci_resources(struct adapter * adapter)
|
|
{
|
|
struct ix_queue *que = adapter->queues;
|
|
device_t dev = adapter->dev;
|
|
int rid, memrid;
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB)
|
|
memrid = PCIR_BAR(MSIX_82598_BAR);
|
|
else
|
|
memrid = PCIR_BAR(MSIX_82599_BAR);
|
|
|
|
/*
|
|
** There is a slight possibility of a failure mode
|
|
** in attach that will result in entering this function
|
|
** before interrupt resources have been initialized, and
|
|
** in that case we do not want to execute the loops below
|
|
** We can detect this reliably by the state of the adapter
|
|
** res pointer.
|
|
*/
|
|
if (adapter->res == NULL)
|
|
goto mem;
|
|
|
|
/*
|
|
** Release all msix queue resources:
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++, que++) {
|
|
rid = que->msix + 1;
|
|
if (que->tag != NULL) {
|
|
bus_teardown_intr(dev, que->res, que->tag);
|
|
que->tag = NULL;
|
|
}
|
|
if (que->res != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid, que->res);
|
|
}
|
|
|
|
|
|
/* Clean the Legacy or Link interrupt last */
|
|
if (adapter->vector) /* we are doing MSIX */
|
|
rid = adapter->vector + 1;
|
|
else
|
|
(adapter->msix != 0) ? (rid = 1):(rid = 0);
|
|
|
|
if (adapter->tag != NULL) {
|
|
bus_teardown_intr(dev, adapter->res, adapter->tag);
|
|
adapter->tag = NULL;
|
|
}
|
|
if (adapter->res != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid, adapter->res);
|
|
|
|
mem:
|
|
if (adapter->msix)
|
|
pci_release_msi(dev);
|
|
|
|
if (adapter->msix_mem != NULL)
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
memrid, adapter->msix_mem);
|
|
|
|
if (adapter->pci_mem != NULL)
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
PCIR_BAR(0), adapter->pci_mem);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup networking device structure and register an interface.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_setup_interface(device_t dev, struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
INIT_DEBUGOUT("ixgbe_setup_interface: begin");
|
|
|
|
ifp = adapter->ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL) {
|
|
device_printf(dev, "can not allocate ifnet structure\n");
|
|
return (-1);
|
|
}
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
ifp->if_baudrate = IF_Gbps(10);
|
|
ifp->if_init = ixgbe_init;
|
|
ifp->if_softc = adapter;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = ixgbe_ioctl;
|
|
#if __FreeBSD_version >= 1100036
|
|
if_setgetcounterfn(ifp, ixgbe_get_counter);
|
|
#endif
|
|
#ifndef IXGBE_LEGACY_TX
|
|
ifp->if_transmit = ixgbe_mq_start;
|
|
ifp->if_qflush = ixgbe_qflush;
|
|
#else
|
|
ifp->if_start = ixgbe_start;
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, adapter->num_tx_desc - 2);
|
|
ifp->if_snd.ifq_drv_maxlen = adapter->num_tx_desc - 2;
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
#endif
|
|
|
|
ether_ifattach(ifp, adapter->hw.mac.addr);
|
|
|
|
adapter->max_frame_size =
|
|
ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
|
|
|
|
/*
|
|
* Tell the upper layer(s) we support long frames.
|
|
*/
|
|
ifp->if_hdrlen = sizeof(struct ether_vlan_header);
|
|
|
|
ifp->if_capabilities |= IFCAP_HWCSUM | IFCAP_TSO | IFCAP_VLAN_HWCSUM;
|
|
ifp->if_capabilities |= IFCAP_JUMBO_MTU;
|
|
ifp->if_capabilities |= IFCAP_LRO;
|
|
ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING
|
|
| IFCAP_VLAN_HWTSO
|
|
| IFCAP_VLAN_MTU
|
|
| IFCAP_HWSTATS;
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
|
|
/*
|
|
** Don't turn this on by default, if vlans are
|
|
** created on another pseudo device (eg. lagg)
|
|
** then vlan events are not passed thru, breaking
|
|
** operation, but with HW FILTER off it works. If
|
|
** using vlans directly on the ixgbe driver you can
|
|
** enable this and get full hardware tag filtering.
|
|
*/
|
|
ifp->if_capabilities |= IFCAP_VLAN_HWFILTER;
|
|
|
|
/*
|
|
* Specify the media types supported by this adapter and register
|
|
* callbacks to update media and link information
|
|
*/
|
|
ifmedia_init(&adapter->media, IFM_IMASK, ixgbe_media_change,
|
|
ixgbe_media_status);
|
|
|
|
ixgbe_add_media_types(adapter);
|
|
|
|
/* Autoselect media by default */
|
|
ifmedia_set(&adapter->media, IFM_ETHER | IFM_AUTO);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ixgbe_add_media_types(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
device_t dev = adapter->dev;
|
|
int layer;
|
|
|
|
layer = ixgbe_get_supported_physical_layer(hw);
|
|
|
|
/* Media types with matching FreeBSD media defines */
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_T)
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_10G_T, 0, NULL);
|
|
if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_T)
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_1000_T, 0, NULL);
|
|
if (layer & IXGBE_PHYSICAL_LAYER_100BASE_TX)
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_100_TX, 0, NULL);
|
|
|
|
if (layer & IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU ||
|
|
layer & IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA)
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_10G_TWINAX, 0, NULL);
|
|
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_LR)
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_10G_LR, 0, NULL);
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_SR)
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_10G_SR, 0, NULL);
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_CX4)
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_10G_CX4, 0, NULL);
|
|
if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_SX)
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_1000_SX, 0, NULL);
|
|
#if 0
|
|
if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_LX)
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_1000_LX, 0, NULL);
|
|
#endif
|
|
|
|
/*
|
|
** Other (no matching FreeBSD media type):
|
|
** To workaround this, we'll assign these completely
|
|
** inappropriate media types.
|
|
*/
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_KR) {
|
|
device_printf(dev, "Media supported: 10GbaseKR\n");
|
|
device_printf(dev, "10GbaseKR mapped to 10baseT\n");
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_10_T, 0, NULL);
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_KX4) {
|
|
device_printf(dev, "Media supported: 10GbaseKX4\n");
|
|
device_printf(dev, "10GbaseKX4 mapped to 10base2\n");
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_10_2, 0, NULL);
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_KX) {
|
|
device_printf(dev, "Media supported: 1000baseKX\n");
|
|
device_printf(dev, "1000baseKX mapped to 10base5\n");
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_10_5, 0, NULL);
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_BX) {
|
|
/* Someday, someone will care about you... */
|
|
device_printf(dev, "Media supported: 1000baseBX\n");
|
|
}
|
|
|
|
/* Very old */
|
|
if (hw->device_id == IXGBE_DEV_ID_82598AT) {
|
|
ifmedia_add(&adapter->media,
|
|
IFM_ETHER | IFM_1000_T | IFM_FDX, 0, NULL);
|
|
ifmedia_add(&adapter->media,
|
|
IFM_ETHER | IFM_1000_T, 0, NULL);
|
|
}
|
|
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_AUTO, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
ixgbe_config_link(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 autoneg, err = 0;
|
|
bool sfp, negotiate;
|
|
|
|
sfp = ixgbe_is_sfp(hw);
|
|
|
|
if (sfp) {
|
|
if (hw->phy.multispeed_fiber) {
|
|
hw->mac.ops.setup_sfp(hw);
|
|
ixgbe_enable_tx_laser(hw);
|
|
taskqueue_enqueue(adapter->tq, &adapter->msf_task);
|
|
} else
|
|
taskqueue_enqueue(adapter->tq, &adapter->mod_task);
|
|
} else {
|
|
if (hw->mac.ops.check_link)
|
|
err = ixgbe_check_link(hw, &adapter->link_speed,
|
|
&adapter->link_up, FALSE);
|
|
if (err)
|
|
goto out;
|
|
autoneg = hw->phy.autoneg_advertised;
|
|
if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
|
|
err = hw->mac.ops.get_link_capabilities(hw,
|
|
&autoneg, &negotiate);
|
|
if (err)
|
|
goto out;
|
|
if (hw->mac.ops.setup_link)
|
|
err = hw->mac.ops.setup_link(hw,
|
|
autoneg, adapter->link_up);
|
|
}
|
|
out:
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Enable transmit units.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_initialize_transmit_units(struct adapter *adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
/* Setup the Base and Length of the Tx Descriptor Ring */
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
u64 tdba = txr->txdma.dma_paddr;
|
|
u32 txctrl = 0;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDBAL(i),
|
|
(tdba & 0x00000000ffffffffULL));
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDBAH(i), (tdba >> 32));
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDLEN(i),
|
|
adapter->num_tx_desc * sizeof(union ixgbe_adv_tx_desc));
|
|
|
|
/* Setup the HW Tx Head and Tail descriptor pointers */
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDH(i), 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDT(i), 0);
|
|
|
|
/* Cache the tail address */
|
|
txr->tail = IXGBE_TDT(txr->me);
|
|
|
|
/* Set the processing limit */
|
|
txr->process_limit = ixgbe_tx_process_limit;
|
|
|
|
/* Disable Head Writeback */
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_82598EB:
|
|
txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
|
|
break;
|
|
case ixgbe_mac_82599EB:
|
|
case ixgbe_mac_X540:
|
|
default:
|
|
txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
|
|
break;
|
|
}
|
|
txctrl &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_82598EB:
|
|
IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), txctrl);
|
|
break;
|
|
case ixgbe_mac_82599EB:
|
|
case ixgbe_mac_X540:
|
|
default:
|
|
IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), txctrl);
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
if (hw->mac.type != ixgbe_mac_82598EB) {
|
|
u32 dmatxctl, rttdcs;
|
|
dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
|
|
dmatxctl |= IXGBE_DMATXCTL_TE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl);
|
|
/* Disable arbiter to set MTQC */
|
|
rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
|
|
rttdcs |= IXGBE_RTTDCS_ARBDIS;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
|
|
IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB);
|
|
rttdcs &= ~IXGBE_RTTDCS_ARBDIS;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixgbe_initialise_rss_mapping(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
uint32_t reta;
|
|
int i, j, queue_id;
|
|
uint32_t rss_key[10];
|
|
uint32_t mrqc;
|
|
#ifdef RSS
|
|
uint32_t rss_hash_config;
|
|
#endif
|
|
|
|
/* Setup RSS */
|
|
reta = 0;
|
|
|
|
#ifdef RSS
|
|
/* Fetch the configured RSS key */
|
|
rss_getkey((uint8_t *) &rss_key);
|
|
#else
|
|
/* set up random bits */
|
|
arc4rand(&rss_key, sizeof(rss_key), 0);
|
|
#endif
|
|
|
|
/* Set up the redirection table */
|
|
for (i = 0, j = 0; i < 128; i++, j++) {
|
|
if (j == adapter->num_queues) j = 0;
|
|
#ifdef RSS
|
|
/*
|
|
* Fetch the RSS bucket id for the given indirection entry.
|
|
* Cap it at the number of configured buckets (which is
|
|
* num_queues.)
|
|
*/
|
|
queue_id = rss_get_indirection_to_bucket(i);
|
|
queue_id = queue_id % adapter->num_queues;
|
|
#else
|
|
queue_id = (j * 0x11);
|
|
#endif
|
|
/*
|
|
* The low 8 bits are for hash value (n+0);
|
|
* The next 8 bits are for hash value (n+1), etc.
|
|
*/
|
|
reta = reta >> 8;
|
|
reta = reta | ( ((uint32_t) queue_id) << 24);
|
|
if ((i & 3) == 3) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta);
|
|
reta = 0;
|
|
}
|
|
}
|
|
|
|
/* Now fill our hash function seeds */
|
|
for (int i = 0; i < 10; i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), rss_key[i]);
|
|
|
|
/* Perform hash on these packet types */
|
|
#ifdef RSS
|
|
mrqc = IXGBE_MRQC_RSSEN;
|
|
rss_hash_config = rss_gethashconfig();
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_IPV4)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_TCP_IPV4)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4_TCP;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_IPV6)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_TCP_IPV6)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_TCP;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_IPV6_EX)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_EX;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_TCP_IPV6_EX)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_UDP_IPV4)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4_UDP;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_UDP_IPV4_EX)
|
|
device_printf(adapter->dev,
|
|
"%s: RSS_HASHTYPE_RSS_UDP_IPV4_EX defined, "
|
|
"but not supported\n", __func__);
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_UDP_IPV6)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_UDP;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_UDP_IPV6_EX)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP;
|
|
#else
|
|
/*
|
|
* Disable UDP - IP fragments aren't currently being handled
|
|
* and so we end up with a mix of 2-tuple and 4-tuple
|
|
* traffic.
|
|
*/
|
|
mrqc = IXGBE_MRQC_RSSEN
|
|
| IXGBE_MRQC_RSS_FIELD_IPV4
|
|
| IXGBE_MRQC_RSS_FIELD_IPV4_TCP
|
|
#if 0
|
|
| IXGBE_MRQC_RSS_FIELD_IPV4_UDP
|
|
#endif
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_EX
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_TCP
|
|
#if 0
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_UDP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP
|
|
#endif
|
|
;
|
|
#endif /* RSS */
|
|
IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup receive registers and features.
|
|
*
|
|
**********************************************************************/
|
|
#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
|
|
|
|
#define BSIZEPKT_ROUNDUP ((1<<IXGBE_SRRCTL_BSIZEPKT_SHIFT)-1)
|
|
|
|
static void
|
|
ixgbe_initialize_receive_units(struct adapter *adapter)
|
|
{
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
u32 bufsz, fctrl, srrctl, rxcsum;
|
|
u32 hlreg;
|
|
|
|
|
|
/*
|
|
* Make sure receives are disabled while
|
|
* setting up the descriptor ring
|
|
*/
|
|
ixgbe_disable_rx(hw);
|
|
|
|
/* Enable broadcasts */
|
|
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
|
|
fctrl |= IXGBE_FCTRL_BAM;
|
|
fctrl |= IXGBE_FCTRL_DPF;
|
|
fctrl |= IXGBE_FCTRL_PMCF;
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
|
|
|
|
/* Set for Jumbo Frames? */
|
|
hlreg = IXGBE_READ_REG(hw, IXGBE_HLREG0);
|
|
if (ifp->if_mtu > ETHERMTU)
|
|
hlreg |= IXGBE_HLREG0_JUMBOEN;
|
|
else
|
|
hlreg &= ~IXGBE_HLREG0_JUMBOEN;
|
|
#ifdef DEV_NETMAP
|
|
/* crcstrip is conditional in netmap (in RDRXCTL too ?) */
|
|
if (ifp->if_capenable & IFCAP_NETMAP && !ix_crcstrip)
|
|
hlreg &= ~IXGBE_HLREG0_RXCRCSTRP;
|
|
else
|
|
hlreg |= IXGBE_HLREG0_RXCRCSTRP;
|
|
#endif /* DEV_NETMAP */
|
|
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg);
|
|
|
|
bufsz = (adapter->rx_mbuf_sz +
|
|
BSIZEPKT_ROUNDUP) >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
u64 rdba = rxr->rxdma.dma_paddr;
|
|
|
|
/* Setup the Base and Length of the Rx Descriptor Ring */
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDBAL(i),
|
|
(rdba & 0x00000000ffffffffULL));
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDBAH(i), (rdba >> 32));
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDLEN(i),
|
|
adapter->num_rx_desc * sizeof(union ixgbe_adv_rx_desc));
|
|
|
|
/* Set up the SRRCTL register */
|
|
srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i));
|
|
srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
|
|
srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
|
|
srrctl |= bufsz;
|
|
srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
|
|
|
|
/*
|
|
* Set DROP_EN iff we have no flow control and >1 queue.
|
|
* Note that srrctl was cleared shortly before during reset,
|
|
* so we do not need to clear the bit, but do it just in case
|
|
* this code is moved elsewhere.
|
|
*/
|
|
if (adapter->num_queues > 1 &&
|
|
adapter->hw.fc.requested_mode == ixgbe_fc_none) {
|
|
srrctl |= IXGBE_SRRCTL_DROP_EN;
|
|
} else {
|
|
srrctl &= ~IXGBE_SRRCTL_DROP_EN;
|
|
}
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(i), srrctl);
|
|
|
|
/* Setup the HW Rx Head and Tail Descriptor Pointers */
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDH(i), 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDT(i), 0);
|
|
|
|
/* Set the processing limit */
|
|
rxr->process_limit = ixgbe_rx_process_limit;
|
|
|
|
/* Set the driver rx tail address */
|
|
rxr->tail = IXGBE_RDT(rxr->me);
|
|
}
|
|
|
|
if (adapter->hw.mac.type != ixgbe_mac_82598EB) {
|
|
u32 psrtype = IXGBE_PSRTYPE_TCPHDR |
|
|
IXGBE_PSRTYPE_UDPHDR |
|
|
IXGBE_PSRTYPE_IPV4HDR |
|
|
IXGBE_PSRTYPE_IPV6HDR;
|
|
IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
|
|
}
|
|
|
|
rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
|
|
|
|
ixgbe_initialise_rss_mapping(adapter);
|
|
|
|
if (adapter->num_queues > 1) {
|
|
/* RSS and RX IPP Checksum are mutually exclusive */
|
|
rxcsum |= IXGBE_RXCSUM_PCSD;
|
|
}
|
|
|
|
if (ifp->if_capenable & IFCAP_RXCSUM)
|
|
rxcsum |= IXGBE_RXCSUM_PCSD;
|
|
|
|
if (!(rxcsum & IXGBE_RXCSUM_PCSD))
|
|
rxcsum |= IXGBE_RXCSUM_IPPCSE;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
** This routine is run via an vlan config EVENT,
|
|
** it enables us to use the HW Filter table since
|
|
** we can get the vlan id. This just creates the
|
|
** entry in the soft version of the VFTA, init will
|
|
** repopulate the real table.
|
|
*/
|
|
static void
|
|
ixgbe_register_vlan(void *arg, struct ifnet *ifp, u16 vtag)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
u16 index, bit;
|
|
|
|
if (ifp->if_softc != arg) /* Not our event */
|
|
return;
|
|
|
|
if ((vtag == 0) || (vtag > 4095)) /* Invalid */
|
|
return;
|
|
|
|
IXGBE_CORE_LOCK(adapter);
|
|
index = (vtag >> 5) & 0x7F;
|
|
bit = vtag & 0x1F;
|
|
adapter->shadow_vfta[index] |= (1 << bit);
|
|
++adapter->num_vlans;
|
|
ixgbe_setup_vlan_hw_support(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
}
|
|
|
|
/*
|
|
** This routine is run via an vlan
|
|
** unconfig EVENT, remove our entry
|
|
** in the soft vfta.
|
|
*/
|
|
static void
|
|
ixgbe_unregister_vlan(void *arg, struct ifnet *ifp, u16 vtag)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
u16 index, bit;
|
|
|
|
if (ifp->if_softc != arg)
|
|
return;
|
|
|
|
if ((vtag == 0) || (vtag > 4095)) /* Invalid */
|
|
return;
|
|
|
|
IXGBE_CORE_LOCK(adapter);
|
|
index = (vtag >> 5) & 0x7F;
|
|
bit = vtag & 0x1F;
|
|
adapter->shadow_vfta[index] &= ~(1 << bit);
|
|
--adapter->num_vlans;
|
|
/* Re-init to load the changes */
|
|
ixgbe_setup_vlan_hw_support(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
}
|
|
|
|
static void
|
|
ixgbe_setup_vlan_hw_support(struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp = adapter->ifp;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct rx_ring *rxr;
|
|
u32 ctrl;
|
|
|
|
|
|
/*
|
|
** We get here thru init_locked, meaning
|
|
** a soft reset, this has already cleared
|
|
** the VFTA and other state, so if there
|
|
** have been no vlan's registered do nothing.
|
|
*/
|
|
if (adapter->num_vlans == 0)
|
|
return;
|
|
|
|
/* Setup the queues for vlans */
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
rxr = &adapter->rx_rings[i];
|
|
/* On 82599 the VLAN enable is per/queue in RXDCTL */
|
|
if (hw->mac.type != ixgbe_mac_82598EB) {
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
|
|
ctrl |= IXGBE_RXDCTL_VME;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), ctrl);
|
|
}
|
|
rxr->vtag_strip = TRUE;
|
|
}
|
|
|
|
if ((ifp->if_capenable & IFCAP_VLAN_HWFILTER) == 0)
|
|
return;
|
|
/*
|
|
** A soft reset zero's out the VFTA, so
|
|
** we need to repopulate it now.
|
|
*/
|
|
for (int i = 0; i < IXGBE_VFTA_SIZE; i++)
|
|
if (adapter->shadow_vfta[i] != 0)
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTA(i),
|
|
adapter->shadow_vfta[i]);
|
|
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
|
|
/* Enable the Filter Table if enabled */
|
|
if (ifp->if_capenable & IFCAP_VLAN_HWFILTER) {
|
|
ctrl &= ~IXGBE_VLNCTRL_CFIEN;
|
|
ctrl |= IXGBE_VLNCTRL_VFE;
|
|
}
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
ctrl |= IXGBE_VLNCTRL_VME;
|
|
IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, ctrl);
|
|
}
|
|
|
|
static void
|
|
ixgbe_enable_intr(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ix_queue *que = adapter->queues;
|
|
u32 mask, fwsm;
|
|
|
|
mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
|
|
/* Enable Fan Failure detection */
|
|
if (hw->device_id == IXGBE_DEV_ID_82598AT)
|
|
mask |= IXGBE_EIMS_GPI_SDP1_BY_MAC(hw);
|
|
|
|
switch (adapter->hw.mac.type) {
|
|
case ixgbe_mac_82599EB:
|
|
mask |= IXGBE_EIMS_ECC;
|
|
/* Temperature sensor on some adapters */
|
|
mask |= IXGBE_EIMS_GPI_SDP0_BY_MAC(hw);
|
|
/* SFP+ (RX_LOS_N & MOD_ABS_N) */
|
|
mask |= IXGBE_EIMS_GPI_SDP1_BY_MAC(hw);
|
|
mask |= IXGBE_EIMS_GPI_SDP2_BY_MAC(hw);
|
|
#ifdef IXGBE_FDIR
|
|
mask |= IXGBE_EIMS_FLOW_DIR;
|
|
#endif
|
|
break;
|
|
case ixgbe_mac_X540:
|
|
case ixgbe_mac_X550:
|
|
case ixgbe_mac_X550EM_a:
|
|
case ixgbe_mac_X550EM_x:
|
|
/* Detect if Thermal Sensor is enabled */
|
|
fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
|
|
if (fwsm & IXGBE_FWSM_TS_ENABLED)
|
|
mask |= IXGBE_EIMS_TS;
|
|
/* XXX: Which SFP mode line does this look at? */
|
|
if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP)
|
|
mask |= IXGBE_EIMS_GPI_SDP0_BY_MAC(hw);
|
|
mask |= IXGBE_EIMS_ECC;
|
|
#ifdef IXGBE_FDIR
|
|
mask |= IXGBE_EIMS_FLOW_DIR;
|
|
#endif
|
|
/* falls through */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask);
|
|
|
|
/* With RSS we use auto clear */
|
|
if (adapter->msix_mem) {
|
|
mask = IXGBE_EIMS_ENABLE_MASK;
|
|
/* Don't autoclear Link */
|
|
mask &= ~IXGBE_EIMS_OTHER;
|
|
mask &= ~IXGBE_EIMS_LSC;
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIAC, mask);
|
|
}
|
|
|
|
/*
|
|
** Now enable all queues, this is done separately to
|
|
** allow for handling the extended (beyond 32) MSIX
|
|
** vectors that can be used by 82599
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++, que++)
|
|
ixgbe_enable_queue(adapter, que->msix);
|
|
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixgbe_disable_intr(struct adapter *adapter)
|
|
{
|
|
if (adapter->msix_mem)
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, 0);
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
|
|
} else {
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
|
|
}
|
|
IXGBE_WRITE_FLUSH(&adapter->hw);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Get the width and transaction speed of
|
|
** the slot this adapter is plugged into.
|
|
*/
|
|
static void
|
|
ixgbe_get_slot_info(struct ixgbe_hw *hw)
|
|
{
|
|
device_t dev = ((struct ixgbe_osdep *)hw->back)->dev;
|
|
struct ixgbe_mac_info *mac = &hw->mac;
|
|
u16 link;
|
|
u32 offset;
|
|
|
|
/* For most devices simply call the shared code routine */
|
|
if (hw->device_id != IXGBE_DEV_ID_82599_SFP_SF_QP) {
|
|
ixgbe_get_bus_info(hw);
|
|
/* These devices don't use PCI-E */
|
|
if (hw->mac.type == ixgbe_mac_X550EM_x
|
|
|| hw->mac.type == ixgbe_mac_X550EM_a)
|
|
return;
|
|
goto display;
|
|
}
|
|
|
|
/*
|
|
** For the Quad port adapter we need to parse back
|
|
** up the PCI tree to find the speed of the expansion
|
|
** slot into which this adapter is plugged. A bit more work.
|
|
*/
|
|
dev = device_get_parent(device_get_parent(dev));
|
|
#ifdef IXGBE_DEBUG
|
|
device_printf(dev, "parent pcib = %x,%x,%x\n",
|
|
pci_get_bus(dev), pci_get_slot(dev), pci_get_function(dev));
|
|
#endif
|
|
dev = device_get_parent(device_get_parent(dev));
|
|
#ifdef IXGBE_DEBUG
|
|
device_printf(dev, "slot pcib = %x,%x,%x\n",
|
|
pci_get_bus(dev), pci_get_slot(dev), pci_get_function(dev));
|
|
#endif
|
|
/* Now get the PCI Express Capabilities offset */
|
|
pci_find_cap(dev, PCIY_EXPRESS, &offset);
|
|
/* ...and read the Link Status Register */
|
|
link = pci_read_config(dev, offset + PCIER_LINK_STA, 2);
|
|
switch (link & IXGBE_PCI_LINK_WIDTH) {
|
|
case IXGBE_PCI_LINK_WIDTH_1:
|
|
hw->bus.width = ixgbe_bus_width_pcie_x1;
|
|
break;
|
|
case IXGBE_PCI_LINK_WIDTH_2:
|
|
hw->bus.width = ixgbe_bus_width_pcie_x2;
|
|
break;
|
|
case IXGBE_PCI_LINK_WIDTH_4:
|
|
hw->bus.width = ixgbe_bus_width_pcie_x4;
|
|
break;
|
|
case IXGBE_PCI_LINK_WIDTH_8:
|
|
hw->bus.width = ixgbe_bus_width_pcie_x8;
|
|
break;
|
|
default:
|
|
hw->bus.width = ixgbe_bus_width_unknown;
|
|
break;
|
|
}
|
|
|
|
switch (link & IXGBE_PCI_LINK_SPEED) {
|
|
case IXGBE_PCI_LINK_SPEED_2500:
|
|
hw->bus.speed = ixgbe_bus_speed_2500;
|
|
break;
|
|
case IXGBE_PCI_LINK_SPEED_5000:
|
|
hw->bus.speed = ixgbe_bus_speed_5000;
|
|
break;
|
|
case IXGBE_PCI_LINK_SPEED_8000:
|
|
hw->bus.speed = ixgbe_bus_speed_8000;
|
|
break;
|
|
default:
|
|
hw->bus.speed = ixgbe_bus_speed_unknown;
|
|
break;
|
|
}
|
|
|
|
mac->ops.set_lan_id(hw);
|
|
|
|
display:
|
|
device_printf(dev,"PCI Express Bus: Speed %s %s\n",
|
|
((hw->bus.speed == ixgbe_bus_speed_8000) ? "8.0GT/s":
|
|
(hw->bus.speed == ixgbe_bus_speed_5000) ? "5.0GT/s":
|
|
(hw->bus.speed == ixgbe_bus_speed_2500) ? "2.5GT/s":"Unknown"),
|
|
(hw->bus.width == ixgbe_bus_width_pcie_x8) ? "Width x8" :
|
|
(hw->bus.width == ixgbe_bus_width_pcie_x4) ? "Width x4" :
|
|
(hw->bus.width == ixgbe_bus_width_pcie_x1) ? "Width x1" :
|
|
("Unknown"));
|
|
|
|
if ((hw->device_id != IXGBE_DEV_ID_82599_SFP_SF_QP) &&
|
|
((hw->bus.width <= ixgbe_bus_width_pcie_x4) &&
|
|
(hw->bus.speed == ixgbe_bus_speed_2500))) {
|
|
device_printf(dev, "PCI-Express bandwidth available"
|
|
" for this card\n is not sufficient for"
|
|
" optimal performance.\n");
|
|
device_printf(dev, "For optimal performance a x8 "
|
|
"PCIE, or x4 PCIE Gen2 slot is required.\n");
|
|
}
|
|
if ((hw->device_id == IXGBE_DEV_ID_82599_SFP_SF_QP) &&
|
|
((hw->bus.width <= ixgbe_bus_width_pcie_x8) &&
|
|
(hw->bus.speed < ixgbe_bus_speed_8000))) {
|
|
device_printf(dev, "PCI-Express bandwidth available"
|
|
" for this card\n is not sufficient for"
|
|
" optimal performance.\n");
|
|
device_printf(dev, "For optimal performance a x8 "
|
|
"PCIE Gen3 slot is required.\n");
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
** Setup the correct IVAR register for a particular MSIX interrupt
|
|
** (yes this is all very magic and confusing :)
|
|
** - entry is the register array entry
|
|
** - vector is the MSIX vector for this queue
|
|
** - type is RX/TX/MISC
|
|
*/
|
|
static void
|
|
ixgbe_set_ivar(struct adapter *adapter, u8 entry, u8 vector, s8 type)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 ivar, index;
|
|
|
|
vector |= IXGBE_IVAR_ALLOC_VAL;
|
|
|
|
switch (hw->mac.type) {
|
|
|
|
case ixgbe_mac_82598EB:
|
|
if (type == -1)
|
|
entry = IXGBE_IVAR_OTHER_CAUSES_INDEX;
|
|
else
|
|
entry += (type * 64);
|
|
index = (entry >> 2) & 0x1F;
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index));
|
|
ivar &= ~(0xFF << (8 * (entry & 0x3)));
|
|
ivar |= (vector << (8 * (entry & 0x3)));
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR(index), ivar);
|
|
break;
|
|
|
|
case ixgbe_mac_82599EB:
|
|
case ixgbe_mac_X540:
|
|
case ixgbe_mac_X550:
|
|
case ixgbe_mac_X550EM_a:
|
|
case ixgbe_mac_X550EM_x:
|
|
if (type == -1) { /* MISC IVAR */
|
|
index = (entry & 1) * 8;
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR_MISC);
|
|
ivar &= ~(0xFF << index);
|
|
ivar |= (vector << index);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IVAR_MISC, ivar);
|
|
} else { /* RX/TX IVARS */
|
|
index = (16 * (entry & 1)) + (8 * type);
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(entry >> 1));
|
|
ivar &= ~(0xFF << index);
|
|
ivar |= (vector << index);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IVAR(entry >> 1), ivar);
|
|
}
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
ixgbe_configure_ivars(struct adapter *adapter)
|
|
{
|
|
struct ix_queue *que = adapter->queues;
|
|
u32 newitr;
|
|
|
|
if (ixgbe_max_interrupt_rate > 0)
|
|
newitr = (4000000 / ixgbe_max_interrupt_rate) & 0x0FF8;
|
|
else
|
|
newitr = 0;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, que++) {
|
|
/* First the RX queue entry */
|
|
ixgbe_set_ivar(adapter, i, que->msix, 0);
|
|
/* ... and the TX */
|
|
ixgbe_set_ivar(adapter, i, que->msix, 1);
|
|
/* Set an Initial EITR value */
|
|
IXGBE_WRITE_REG(&adapter->hw,
|
|
IXGBE_EITR(que->msix), newitr);
|
|
}
|
|
|
|
/* For the Link interrupt */
|
|
ixgbe_set_ivar(adapter, 1, adapter->vector, -1);
|
|
}
|
|
|
|
/*
|
|
** ixgbe_sfp_probe - called in the local timer to
|
|
** determine if a port had optics inserted.
|
|
*/
|
|
static bool ixgbe_sfp_probe(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
device_t dev = adapter->dev;
|
|
bool result = FALSE;
|
|
|
|
if ((hw->phy.type == ixgbe_phy_nl) &&
|
|
(hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
|
|
s32 ret = hw->phy.ops.identify_sfp(hw);
|
|
if (ret)
|
|
goto out;
|
|
ret = hw->phy.ops.reset(hw);
|
|
if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,"Unsupported SFP+ module detected!");
|
|
printf(" Reload driver with supported module.\n");
|
|
adapter->sfp_probe = FALSE;
|
|
goto out;
|
|
} else
|
|
device_printf(dev,"SFP+ module detected!\n");
|
|
/* We now have supported optics */
|
|
adapter->sfp_probe = FALSE;
|
|
/* Set the optics type so system reports correctly */
|
|
ixgbe_setup_optics(adapter);
|
|
result = TRUE;
|
|
}
|
|
out:
|
|
return (result);
|
|
}
|
|
|
|
/*
|
|
** Tasklet handler for MSIX Link interrupts
|
|
** - do outside interrupt since it might sleep
|
|
*/
|
|
static void
|
|
ixgbe_handle_link(void *context, int pending)
|
|
{
|
|
struct adapter *adapter = context;
|
|
|
|
ixgbe_check_link(&adapter->hw,
|
|
&adapter->link_speed, &adapter->link_up, 0);
|
|
ixgbe_update_link_status(adapter);
|
|
}
|
|
|
|
/*
|
|
** Tasklet for handling SFP module interrupts
|
|
*/
|
|
static void
|
|
ixgbe_handle_mod(void *context, int pending)
|
|
{
|
|
struct adapter *adapter = context;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
device_t dev = adapter->dev;
|
|
u32 err;
|
|
|
|
err = hw->phy.ops.identify_sfp(hw);
|
|
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,
|
|
"Unsupported SFP+ module type was detected.\n");
|
|
return;
|
|
}
|
|
err = hw->mac.ops.setup_sfp(hw);
|
|
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,
|
|
"Setup failure - unsupported SFP+ module type.\n");
|
|
return;
|
|
}
|
|
taskqueue_enqueue(adapter->tq, &adapter->msf_task);
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
** Tasklet for handling MSF (multispeed fiber) interrupts
|
|
*/
|
|
static void
|
|
ixgbe_handle_msf(void *context, int pending)
|
|
{
|
|
struct adapter *adapter = context;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 autoneg;
|
|
bool negotiate;
|
|
int err;
|
|
|
|
err = hw->phy.ops.identify_sfp(hw);
|
|
if (!err) {
|
|
ixgbe_setup_optics(adapter);
|
|
INIT_DEBUGOUT1("ixgbe_sfp_probe: flags: %X\n", adapter->optics);
|
|
}
|
|
|
|
autoneg = hw->phy.autoneg_advertised;
|
|
if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
|
|
hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiate);
|
|
if (hw->mac.ops.setup_link)
|
|
hw->mac.ops.setup_link(hw, autoneg, TRUE);
|
|
|
|
ifmedia_removeall(&adapter->media);
|
|
ixgbe_add_media_types(adapter);
|
|
return;
|
|
}
|
|
|
|
#ifdef IXGBE_FDIR
|
|
/*
|
|
** Tasklet for reinitializing the Flow Director filter table
|
|
*/
|
|
static void
|
|
ixgbe_reinit_fdir(void *context, int pending)
|
|
{
|
|
struct adapter *adapter = context;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
|
|
if (adapter->fdir_reinit != 1) /* Shouldn't happen */
|
|
return;
|
|
ixgbe_reinit_fdir_tables_82599(&adapter->hw);
|
|
adapter->fdir_reinit = 0;
|
|
/* re-enable flow director interrupts */
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, IXGBE_EIMS_FLOW_DIR);
|
|
/* Restart the interface */
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/**********************************************************************
|
|
*
|
|
* Update the board statistics counters.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_update_stats_counters(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 missed_rx = 0, bprc, lxon, lxoff, total;
|
|
u64 total_missed_rx = 0;
|
|
|
|
adapter->stats.pf.crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
|
|
adapter->stats.pf.illerrc += IXGBE_READ_REG(hw, IXGBE_ILLERRC);
|
|
adapter->stats.pf.errbc += IXGBE_READ_REG(hw, IXGBE_ERRBC);
|
|
adapter->stats.pf.mspdc += IXGBE_READ_REG(hw, IXGBE_MSPDC);
|
|
|
|
/*
|
|
** Note: these are for the 8 possible traffic classes,
|
|
** which in current implementation is unused,
|
|
** therefore only 0 should read real data.
|
|
*/
|
|
for (int i = 0; i < 8; i++) {
|
|
u32 mp;
|
|
mp = IXGBE_READ_REG(hw, IXGBE_MPC(i));
|
|
/* missed_rx tallies misses for the gprc workaround */
|
|
missed_rx += mp;
|
|
/* global total per queue */
|
|
adapter->stats.pf.mpc[i] += mp;
|
|
/* total for stats display */
|
|
total_missed_rx += adapter->stats.pf.mpc[i];
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
adapter->stats.pf.rnbc[i] +=
|
|
IXGBE_READ_REG(hw, IXGBE_RNBC(i));
|
|
adapter->stats.pf.qbtc[i] +=
|
|
IXGBE_READ_REG(hw, IXGBE_QBTC(i));
|
|
adapter->stats.pf.qbrc[i] +=
|
|
IXGBE_READ_REG(hw, IXGBE_QBRC(i));
|
|
adapter->stats.pf.pxonrxc[i] +=
|
|
IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
|
|
} else
|
|
adapter->stats.pf.pxonrxc[i] +=
|
|
IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i));
|
|
adapter->stats.pf.pxontxc[i] +=
|
|
IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
|
|
adapter->stats.pf.pxofftxc[i] +=
|
|
IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
|
|
if (hw->mac.type != ixgbe_mac_X550EM_x)
|
|
adapter->stats.pf.pxoffrxc[i] +=
|
|
IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
|
|
adapter->stats.pf.pxon2offc[i] +=
|
|
IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i));
|
|
}
|
|
for (int i = 0; i < 16; i++) {
|
|
adapter->stats.pf.qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i));
|
|
adapter->stats.pf.qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i));
|
|
adapter->stats.pf.qprdc[i] += IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
|
|
}
|
|
adapter->stats.pf.mlfc += IXGBE_READ_REG(hw, IXGBE_MLFC);
|
|
adapter->stats.pf.mrfc += IXGBE_READ_REG(hw, IXGBE_MRFC);
|
|
adapter->stats.pf.rlec += IXGBE_READ_REG(hw, IXGBE_RLEC);
|
|
|
|
/* Hardware workaround, gprc counts missed packets */
|
|
adapter->stats.pf.gprc += IXGBE_READ_REG(hw, IXGBE_GPRC);
|
|
adapter->stats.pf.gprc -= missed_rx;
|
|
|
|
if (hw->mac.type != ixgbe_mac_82598EB) {
|
|
adapter->stats.pf.gorc += IXGBE_READ_REG(hw, IXGBE_GORCL) +
|
|
((u64)IXGBE_READ_REG(hw, IXGBE_GORCH) << 32);
|
|
adapter->stats.pf.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL) +
|
|
((u64)IXGBE_READ_REG(hw, IXGBE_GOTCH) << 32);
|
|
adapter->stats.pf.tor += IXGBE_READ_REG(hw, IXGBE_TORL) +
|
|
((u64)IXGBE_READ_REG(hw, IXGBE_TORH) << 32);
|
|
adapter->stats.pf.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
|
|
adapter->stats.pf.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
|
|
} else {
|
|
adapter->stats.pf.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC);
|
|
adapter->stats.pf.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
|
|
/* 82598 only has a counter in the high register */
|
|
adapter->stats.pf.gorc += IXGBE_READ_REG(hw, IXGBE_GORCH);
|
|
adapter->stats.pf.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
|
|
adapter->stats.pf.tor += IXGBE_READ_REG(hw, IXGBE_TORH);
|
|
}
|
|
|
|
/*
|
|
* Workaround: mprc hardware is incorrectly counting
|
|
* broadcasts, so for now we subtract those.
|
|
*/
|
|
bprc = IXGBE_READ_REG(hw, IXGBE_BPRC);
|
|
adapter->stats.pf.bprc += bprc;
|
|
adapter->stats.pf.mprc += IXGBE_READ_REG(hw, IXGBE_MPRC);
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
adapter->stats.pf.mprc -= bprc;
|
|
|
|
adapter->stats.pf.prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64);
|
|
adapter->stats.pf.prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127);
|
|
adapter->stats.pf.prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255);
|
|
adapter->stats.pf.prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511);
|
|
adapter->stats.pf.prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023);
|
|
adapter->stats.pf.prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522);
|
|
|
|
lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC);
|
|
adapter->stats.pf.lxontxc += lxon;
|
|
lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
|
|
adapter->stats.pf.lxofftxc += lxoff;
|
|
total = lxon + lxoff;
|
|
|
|
adapter->stats.pf.gptc += IXGBE_READ_REG(hw, IXGBE_GPTC);
|
|
adapter->stats.pf.mptc += IXGBE_READ_REG(hw, IXGBE_MPTC);
|
|
adapter->stats.pf.ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64);
|
|
adapter->stats.pf.gptc -= total;
|
|
adapter->stats.pf.mptc -= total;
|
|
adapter->stats.pf.ptc64 -= total;
|
|
adapter->stats.pf.gotc -= total * ETHER_MIN_LEN;
|
|
|
|
adapter->stats.pf.ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
|
|
adapter->stats.pf.rfc += IXGBE_READ_REG(hw, IXGBE_RFC);
|
|
adapter->stats.pf.roc += IXGBE_READ_REG(hw, IXGBE_ROC);
|
|
adapter->stats.pf.rjc += IXGBE_READ_REG(hw, IXGBE_RJC);
|
|
adapter->stats.pf.mngprc += IXGBE_READ_REG(hw, IXGBE_MNGPRC);
|
|
adapter->stats.pf.mngpdc += IXGBE_READ_REG(hw, IXGBE_MNGPDC);
|
|
adapter->stats.pf.mngptc += IXGBE_READ_REG(hw, IXGBE_MNGPTC);
|
|
adapter->stats.pf.tpr += IXGBE_READ_REG(hw, IXGBE_TPR);
|
|
adapter->stats.pf.tpt += IXGBE_READ_REG(hw, IXGBE_TPT);
|
|
adapter->stats.pf.ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127);
|
|
adapter->stats.pf.ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255);
|
|
adapter->stats.pf.ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511);
|
|
adapter->stats.pf.ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023);
|
|
adapter->stats.pf.ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522);
|
|
adapter->stats.pf.bptc += IXGBE_READ_REG(hw, IXGBE_BPTC);
|
|
adapter->stats.pf.xec += IXGBE_READ_REG(hw, IXGBE_XEC);
|
|
adapter->stats.pf.fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC);
|
|
adapter->stats.pf.fclast += IXGBE_READ_REG(hw, IXGBE_FCLAST);
|
|
/* Only read FCOE on 82599 */
|
|
if (hw->mac.type != ixgbe_mac_82598EB) {
|
|
adapter->stats.pf.fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC);
|
|
adapter->stats.pf.fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC);
|
|
adapter->stats.pf.fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC);
|
|
adapter->stats.pf.fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC);
|
|
adapter->stats.pf.fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC);
|
|
}
|
|
|
|
/* Fill out the OS statistics structure */
|
|
IXGBE_SET_IPACKETS(adapter, adapter->stats.pf.gprc);
|
|
IXGBE_SET_OPACKETS(adapter, adapter->stats.pf.gptc);
|
|
IXGBE_SET_IBYTES(adapter, adapter->stats.pf.gorc);
|
|
IXGBE_SET_OBYTES(adapter, adapter->stats.pf.gotc);
|
|
IXGBE_SET_IMCASTS(adapter, adapter->stats.pf.mprc);
|
|
IXGBE_SET_OMCASTS(adapter, adapter->stats.pf.mptc);
|
|
IXGBE_SET_COLLISIONS(adapter, 0);
|
|
IXGBE_SET_IQDROPS(adapter, total_missed_rx);
|
|
IXGBE_SET_IERRORS(adapter, adapter->stats.pf.crcerrs
|
|
+ adapter->stats.pf.rlec);
|
|
}
|
|
|
|
#if __FreeBSD_version >= 1100036
|
|
static uint64_t
|
|
ixgbe_get_counter(struct ifnet *ifp, ift_counter cnt)
|
|
{
|
|
struct adapter *adapter;
|
|
|
|
adapter = if_getsoftc(ifp);
|
|
|
|
switch (cnt) {
|
|
case IFCOUNTER_IPACKETS:
|
|
return (adapter->ipackets);
|
|
case IFCOUNTER_OPACKETS:
|
|
return (adapter->opackets);
|
|
case IFCOUNTER_IBYTES:
|
|
return (adapter->ibytes);
|
|
case IFCOUNTER_OBYTES:
|
|
return (adapter->obytes);
|
|
case IFCOUNTER_IMCASTS:
|
|
return (adapter->imcasts);
|
|
case IFCOUNTER_OMCASTS:
|
|
return (adapter->omcasts);
|
|
case IFCOUNTER_COLLISIONS:
|
|
return (0);
|
|
case IFCOUNTER_IQDROPS:
|
|
return (adapter->iqdrops);
|
|
case IFCOUNTER_IERRORS:
|
|
return (adapter->ierrors);
|
|
default:
|
|
return (if_get_counter_default(ifp, cnt));
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/** ixgbe_sysctl_tdh_handler - Handler function
|
|
* Retrieves the TDH value from the hardware
|
|
*/
|
|
static int
|
|
ixgbe_sysctl_tdh_handler(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
|
|
struct tx_ring *txr = ((struct tx_ring *)oidp->oid_arg1);
|
|
if (!txr) return 0;
|
|
|
|
unsigned val = IXGBE_READ_REG(&txr->adapter->hw, IXGBE_TDH(txr->me));
|
|
error = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (error || !req->newptr)
|
|
return error;
|
|
return 0;
|
|
}
|
|
|
|
/** ixgbe_sysctl_tdt_handler - Handler function
|
|
* Retrieves the TDT value from the hardware
|
|
*/
|
|
static int
|
|
ixgbe_sysctl_tdt_handler(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
|
|
struct tx_ring *txr = ((struct tx_ring *)oidp->oid_arg1);
|
|
if (!txr) return 0;
|
|
|
|
unsigned val = IXGBE_READ_REG(&txr->adapter->hw, IXGBE_TDT(txr->me));
|
|
error = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (error || !req->newptr)
|
|
return error;
|
|
return 0;
|
|
}
|
|
|
|
/** ixgbe_sysctl_rdh_handler - Handler function
|
|
* Retrieves the RDH value from the hardware
|
|
*/
|
|
static int
|
|
ixgbe_sysctl_rdh_handler(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
|
|
struct rx_ring *rxr = ((struct rx_ring *)oidp->oid_arg1);
|
|
if (!rxr) return 0;
|
|
|
|
unsigned val = IXGBE_READ_REG(&rxr->adapter->hw, IXGBE_RDH(rxr->me));
|
|
error = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (error || !req->newptr)
|
|
return error;
|
|
return 0;
|
|
}
|
|
|
|
/** ixgbe_sysctl_rdt_handler - Handler function
|
|
* Retrieves the RDT value from the hardware
|
|
*/
|
|
static int
|
|
ixgbe_sysctl_rdt_handler(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
|
|
struct rx_ring *rxr = ((struct rx_ring *)oidp->oid_arg1);
|
|
if (!rxr) return 0;
|
|
|
|
unsigned val = IXGBE_READ_REG(&rxr->adapter->hw, IXGBE_RDT(rxr->me));
|
|
error = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (error || !req->newptr)
|
|
return error;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ixgbe_sysctl_interrupt_rate_handler(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
struct ix_queue *que = ((struct ix_queue *)oidp->oid_arg1);
|
|
unsigned int reg, usec, rate;
|
|
|
|
reg = IXGBE_READ_REG(&que->adapter->hw, IXGBE_EITR(que->msix));
|
|
usec = ((reg & 0x0FF8) >> 3);
|
|
if (usec > 0)
|
|
rate = 500000 / usec;
|
|
else
|
|
rate = 0;
|
|
error = sysctl_handle_int(oidp, &rate, 0, req);
|
|
if (error || !req->newptr)
|
|
return error;
|
|
reg &= ~0xfff; /* default, no limitation */
|
|
ixgbe_max_interrupt_rate = 0;
|
|
if (rate > 0 && rate < 500000) {
|
|
if (rate < 1000)
|
|
rate = 1000;
|
|
ixgbe_max_interrupt_rate = rate;
|
|
reg |= ((4000000/rate) & 0xff8 );
|
|
}
|
|
IXGBE_WRITE_REG(&que->adapter->hw, IXGBE_EITR(que->msix), reg);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Add sysctl variables, one per statistic, to the system.
|
|
*/
|
|
static void
|
|
ixgbe_add_hw_stats(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
|
|
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(dev);
|
|
struct sysctl_oid *tree = device_get_sysctl_tree(dev);
|
|
struct sysctl_oid_list *child = SYSCTL_CHILDREN(tree);
|
|
struct ixgbe_hw_stats *stats = &adapter->stats.pf;
|
|
|
|
struct sysctl_oid *stat_node, *queue_node;
|
|
struct sysctl_oid_list *stat_list, *queue_list;
|
|
|
|
#define QUEUE_NAME_LEN 32
|
|
char namebuf[QUEUE_NAME_LEN];
|
|
|
|
/* Driver Statistics */
|
|
SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "dropped",
|
|
CTLFLAG_RD, &adapter->dropped_pkts,
|
|
"Driver dropped packets");
|
|
SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "mbuf_defrag_failed",
|
|
CTLFLAG_RD, &adapter->mbuf_defrag_failed,
|
|
"m_defrag() failed");
|
|
SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "watchdog_events",
|
|
CTLFLAG_RD, &adapter->watchdog_events,
|
|
"Watchdog timeouts");
|
|
SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "link_irq",
|
|
CTLFLAG_RD, &adapter->vector_irq,
|
|
"Link MSIX IRQ Handled");
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
snprintf(namebuf, QUEUE_NAME_LEN, "queue%d", i);
|
|
queue_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, namebuf,
|
|
CTLFLAG_RD, NULL, "Queue Name");
|
|
queue_list = SYSCTL_CHILDREN(queue_node);
|
|
|
|
SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "interrupt_rate",
|
|
CTLTYPE_UINT | CTLFLAG_RW, &adapter->queues[i],
|
|
sizeof(&adapter->queues[i]),
|
|
ixgbe_sysctl_interrupt_rate_handler, "IU",
|
|
"Interrupt Rate");
|
|
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "irqs",
|
|
CTLFLAG_RD, &(adapter->queues[i].irqs),
|
|
"irqs on this queue");
|
|
SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "txd_head",
|
|
CTLTYPE_UINT | CTLFLAG_RD, txr, sizeof(txr),
|
|
ixgbe_sysctl_tdh_handler, "IU",
|
|
"Transmit Descriptor Head");
|
|
SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "txd_tail",
|
|
CTLTYPE_UINT | CTLFLAG_RD, txr, sizeof(txr),
|
|
ixgbe_sysctl_tdt_handler, "IU",
|
|
"Transmit Descriptor Tail");
|
|
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO, "tso_tx",
|
|
CTLFLAG_RD, &txr->tso_tx,
|
|
"TSO");
|
|
SYSCTL_ADD_ULONG(ctx, queue_list, OID_AUTO, "no_tx_dma_setup",
|
|
CTLFLAG_RD, &txr->no_tx_dma_setup,
|
|
"Driver tx dma failure in xmit");
|
|
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "no_desc_avail",
|
|
CTLFLAG_RD, &txr->no_desc_avail,
|
|
"Queue No Descriptor Available");
|
|
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "tx_packets",
|
|
CTLFLAG_RD, &txr->total_packets,
|
|
"Queue Packets Transmitted");
|
|
}
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
snprintf(namebuf, QUEUE_NAME_LEN, "queue%d", i);
|
|
queue_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, namebuf,
|
|
CTLFLAG_RD, NULL, "Queue Name");
|
|
queue_list = SYSCTL_CHILDREN(queue_node);
|
|
|
|
struct lro_ctrl *lro = &rxr->lro;
|
|
|
|
snprintf(namebuf, QUEUE_NAME_LEN, "queue%d", i);
|
|
queue_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, namebuf,
|
|
CTLFLAG_RD, NULL, "Queue Name");
|
|
queue_list = SYSCTL_CHILDREN(queue_node);
|
|
|
|
SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "rxd_head",
|
|
CTLTYPE_UINT | CTLFLAG_RD, rxr, sizeof(rxr),
|
|
ixgbe_sysctl_rdh_handler, "IU",
|
|
"Receive Descriptor Head");
|
|
SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "rxd_tail",
|
|
CTLTYPE_UINT | CTLFLAG_RD, rxr, sizeof(rxr),
|
|
ixgbe_sysctl_rdt_handler, "IU",
|
|
"Receive Descriptor Tail");
|
|
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "rx_packets",
|
|
CTLFLAG_RD, &rxr->rx_packets,
|
|
"Queue Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "rx_bytes",
|
|
CTLFLAG_RD, &rxr->rx_bytes,
|
|
"Queue Bytes Received");
|
|
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "rx_copies",
|
|
CTLFLAG_RD, &rxr->rx_copies,
|
|
"Copied RX Frames");
|
|
SYSCTL_ADD_INT(ctx, queue_list, OID_AUTO, "lro_queued",
|
|
CTLFLAG_RD, &lro->lro_queued, 0,
|
|
"LRO Queued");
|
|
SYSCTL_ADD_INT(ctx, queue_list, OID_AUTO, "lro_flushed",
|
|
CTLFLAG_RD, &lro->lro_flushed, 0,
|
|
"LRO Flushed");
|
|
}
|
|
|
|
/* MAC stats get the own sub node */
|
|
|
|
stat_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "mac_stats",
|
|
CTLFLAG_RD, NULL, "MAC Statistics");
|
|
stat_list = SYSCTL_CHILDREN(stat_node);
|
|
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "crc_errs",
|
|
CTLFLAG_RD, &stats->crcerrs,
|
|
"CRC Errors");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "ill_errs",
|
|
CTLFLAG_RD, &stats->illerrc,
|
|
"Illegal Byte Errors");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "byte_errs",
|
|
CTLFLAG_RD, &stats->errbc,
|
|
"Byte Errors");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "short_discards",
|
|
CTLFLAG_RD, &stats->mspdc,
|
|
"MAC Short Packets Discarded");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "local_faults",
|
|
CTLFLAG_RD, &stats->mlfc,
|
|
"MAC Local Faults");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "remote_faults",
|
|
CTLFLAG_RD, &stats->mrfc,
|
|
"MAC Remote Faults");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rec_len_errs",
|
|
CTLFLAG_RD, &stats->rlec,
|
|
"Receive Length Errors");
|
|
|
|
/* Flow Control stats */
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "xon_txd",
|
|
CTLFLAG_RD, &stats->lxontxc,
|
|
"Link XON Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "xon_recvd",
|
|
CTLFLAG_RD, &stats->lxonrxc,
|
|
"Link XON Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "xoff_txd",
|
|
CTLFLAG_RD, &stats->lxofftxc,
|
|
"Link XOFF Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "xoff_recvd",
|
|
CTLFLAG_RD, &stats->lxoffrxc,
|
|
"Link XOFF Received");
|
|
|
|
/* Packet Reception Stats */
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "total_octets_rcvd",
|
|
CTLFLAG_RD, &stats->tor,
|
|
"Total Octets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_octets_rcvd",
|
|
CTLFLAG_RD, &stats->gorc,
|
|
"Good Octets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "total_pkts_rcvd",
|
|
CTLFLAG_RD, &stats->tpr,
|
|
"Total Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_pkts_rcvd",
|
|
CTLFLAG_RD, &stats->gprc,
|
|
"Good Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "mcast_pkts_rcvd",
|
|
CTLFLAG_RD, &stats->mprc,
|
|
"Multicast Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "bcast_pkts_rcvd",
|
|
CTLFLAG_RD, &stats->bprc,
|
|
"Broadcast Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_64",
|
|
CTLFLAG_RD, &stats->prc64,
|
|
"64 byte frames received ");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_65_127",
|
|
CTLFLAG_RD, &stats->prc127,
|
|
"65-127 byte frames received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_128_255",
|
|
CTLFLAG_RD, &stats->prc255,
|
|
"128-255 byte frames received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_256_511",
|
|
CTLFLAG_RD, &stats->prc511,
|
|
"256-511 byte frames received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_512_1023",
|
|
CTLFLAG_RD, &stats->prc1023,
|
|
"512-1023 byte frames received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_1024_1522",
|
|
CTLFLAG_RD, &stats->prc1522,
|
|
"1023-1522 byte frames received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_undersized",
|
|
CTLFLAG_RD, &stats->ruc,
|
|
"Receive Undersized");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_fragmented",
|
|
CTLFLAG_RD, &stats->rfc,
|
|
"Fragmented Packets Received ");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_oversized",
|
|
CTLFLAG_RD, &stats->roc,
|
|
"Oversized Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_jabberd",
|
|
CTLFLAG_RD, &stats->rjc,
|
|
"Received Jabber");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "management_pkts_rcvd",
|
|
CTLFLAG_RD, &stats->mngprc,
|
|
"Management Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "management_pkts_drpd",
|
|
CTLFLAG_RD, &stats->mngptc,
|
|
"Management Packets Dropped");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "checksum_errs",
|
|
CTLFLAG_RD, &stats->xec,
|
|
"Checksum Errors");
|
|
|
|
/* Packet Transmission Stats */
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_octets_txd",
|
|
CTLFLAG_RD, &stats->gotc,
|
|
"Good Octets Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "total_pkts_txd",
|
|
CTLFLAG_RD, &stats->tpt,
|
|
"Total Packets Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_pkts_txd",
|
|
CTLFLAG_RD, &stats->gptc,
|
|
"Good Packets Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "bcast_pkts_txd",
|
|
CTLFLAG_RD, &stats->bptc,
|
|
"Broadcast Packets Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "mcast_pkts_txd",
|
|
CTLFLAG_RD, &stats->mptc,
|
|
"Multicast Packets Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "management_pkts_txd",
|
|
CTLFLAG_RD, &stats->mngptc,
|
|
"Management Packets Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_64",
|
|
CTLFLAG_RD, &stats->ptc64,
|
|
"64 byte frames transmitted ");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_65_127",
|
|
CTLFLAG_RD, &stats->ptc127,
|
|
"65-127 byte frames transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_128_255",
|
|
CTLFLAG_RD, &stats->ptc255,
|
|
"128-255 byte frames transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_256_511",
|
|
CTLFLAG_RD, &stats->ptc511,
|
|
"256-511 byte frames transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_512_1023",
|
|
CTLFLAG_RD, &stats->ptc1023,
|
|
"512-1023 byte frames transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_1024_1522",
|
|
CTLFLAG_RD, &stats->ptc1522,
|
|
"1024-1522 byte frames transmitted");
|
|
}
|
|
|
|
/*
|
|
** Set flow control using sysctl:
|
|
** Flow control values:
|
|
** 0 - off
|
|
** 1 - rx pause
|
|
** 2 - tx pause
|
|
** 3 - full
|
|
*/
|
|
static int
|
|
ixgbe_set_flowcntl(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error, last;
|
|
struct adapter *adapter = (struct adapter *) arg1;
|
|
|
|
last = adapter->fc;
|
|
error = sysctl_handle_int(oidp, &adapter->fc, 0, req);
|
|
if ((error) || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
/* Don't bother if it's not changed */
|
|
if (adapter->fc == last)
|
|
return (0);
|
|
|
|
switch (adapter->fc) {
|
|
case ixgbe_fc_rx_pause:
|
|
case ixgbe_fc_tx_pause:
|
|
case ixgbe_fc_full:
|
|
adapter->hw.fc.requested_mode = adapter->fc;
|
|
if (adapter->num_queues > 1)
|
|
ixgbe_disable_rx_drop(adapter);
|
|
break;
|
|
case ixgbe_fc_none:
|
|
adapter->hw.fc.requested_mode = ixgbe_fc_none;
|
|
if (adapter->num_queues > 1)
|
|
ixgbe_enable_rx_drop(adapter);
|
|
break;
|
|
default:
|
|
adapter->fc = last;
|
|
return (EINVAL);
|
|
}
|
|
/* Don't autoneg if forcing a value */
|
|
adapter->hw.fc.disable_fc_autoneg = TRUE;
|
|
ixgbe_fc_enable(&adapter->hw);
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
** Control advertised link speed:
|
|
** Flags:
|
|
** 0x1 - advertise 100 Mb
|
|
** 0x2 - advertise 1G
|
|
** 0x4 - advertise 10G
|
|
*/
|
|
static int
|
|
ixgbe_set_advertise(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error = 0, requested;
|
|
struct adapter *adapter;
|
|
device_t dev;
|
|
struct ixgbe_hw *hw;
|
|
ixgbe_link_speed speed = 0;
|
|
|
|
adapter = (struct adapter *) arg1;
|
|
dev = adapter->dev;
|
|
hw = &adapter->hw;
|
|
|
|
requested = adapter->advertise;
|
|
error = sysctl_handle_int(oidp, &requested, 0, req);
|
|
if ((error) || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
/* Checks to validate new value */
|
|
if (adapter->advertise == requested) /* no change */
|
|
return (0);
|
|
|
|
if (!((hw->phy.media_type == ixgbe_media_type_copper) ||
|
|
(hw->phy.multispeed_fiber))) {
|
|
device_printf(dev,
|
|
"Advertised speed can only be set on copper or "
|
|
"multispeed fiber media types.\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
if (requested < 0x1 || requested > 0x7) {
|
|
device_printf(dev,
|
|
"Invalid advertised speed; valid modes are 0x1 through 0x7\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
if ((requested & 0x1)
|
|
&& (hw->mac.type != ixgbe_mac_X540)
|
|
&& (hw->mac.type != ixgbe_mac_X550)) {
|
|
device_printf(dev, "Set Advertise: 100Mb on X540/X550 only\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
/* Set new value and report new advertised mode */
|
|
if (requested & 0x1)
|
|
speed |= IXGBE_LINK_SPEED_100_FULL;
|
|
if (requested & 0x2)
|
|
speed |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
if (requested & 0x4)
|
|
speed |= IXGBE_LINK_SPEED_10GB_FULL;
|
|
|
|
hw->mac.autotry_restart = TRUE;
|
|
hw->mac.ops.setup_link(hw, speed, TRUE);
|
|
adapter->advertise = requested;
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
** Thermal Shutdown Trigger
|
|
** - cause a Thermal Overtemp IRQ
|
|
** - this now requires firmware enabling
|
|
*/
|
|
static int
|
|
ixgbe_set_thermal_test(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error, fire = 0;
|
|
struct adapter *adapter = (struct adapter *) arg1;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
|
|
if (hw->mac.type < ixgbe_mac_X540)
|
|
return (0);
|
|
|
|
error = sysctl_handle_int(oidp, &fire, 0, req);
|
|
if ((error) || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
if (fire) {
|
|
u32 reg = IXGBE_READ_REG(hw, IXGBE_EICS);
|
|
reg |= IXGBE_EICR_TS;
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICS, reg);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
** Enable the hardware to drop packets when the buffer is
|
|
** full. This is useful when multiqueue,so that no single
|
|
** queue being full stalls the entire RX engine. We only
|
|
** enable this when Multiqueue AND when Flow Control is
|
|
** disabled.
|
|
*/
|
|
static void
|
|
ixgbe_enable_rx_drop(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
u32 srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i));
|
|
srrctl |= IXGBE_SRRCTL_DROP_EN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(i), srrctl);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ixgbe_disable_rx_drop(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
u32 srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i));
|
|
srrctl &= ~IXGBE_SRRCTL_DROP_EN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(i), srrctl);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ixgbe_rearm_queues(struct adapter *adapter, u64 queues)
|
|
{
|
|
u32 mask;
|
|
|
|
switch (adapter->hw.mac.type) {
|
|
case ixgbe_mac_82598EB:
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & queues);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
|
|
break;
|
|
case ixgbe_mac_82599EB:
|
|
case ixgbe_mac_X540:
|
|
case ixgbe_mac_X550:
|
|
mask = (queues & 0xFFFFFFFF);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask);
|
|
mask = (queues >> 32);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
|