freebsd-skq/sys/dev/drm/mga_dma.c
Robert Noland 51e39089c9 Initialize the vblank structures at load time. Previously we did this
at irq install/uninstall time, but when we vt switch, we uninstall the
irq handler.  When the irq handler is reinstalled, the modeset ioctl
happens first.  The modeset ioctl is supposed to tell us that we can
disable vblank interrupts if there are no active consumers.  This will
fail after a vt switch until another modeset ioctl is called via dpms
or xrandr.  Leading to cases where either interrupts are on and can't
be disabled, or worse, no interrupts at all.

MFC after:	2 weeks
2009-02-28 02:37:55 +00:00

1173 lines
29 KiB
C

/* mga_dma.c -- DMA support for mga g200/g400 -*- linux-c -*-
* Created: Mon Dec 13 01:50:01 1999 by jhartmann@precisioninsight.com
*/
/* Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
* Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/**
* \file mga_dma.c
* DMA support for MGA G200 / G400.
*
* \author Rickard E. (Rik) Faith <faith@valinux.com>
* \author Jeff Hartmann <jhartmann@valinux.com>
* \author Keith Whitwell <keith@tungstengraphics.com>
* \author Gareth Hughes <gareth@valinux.com>
*/
#include "dev/drm/drmP.h"
#include "dev/drm/drm.h"
#include "dev/drm/drm_sarea.h"
#include "dev/drm/mga_drm.h"
#include "dev/drm/mga_drv.h"
#define MGA_DEFAULT_USEC_TIMEOUT 10000
#define MGA_FREELIST_DEBUG 0
#define MINIMAL_CLEANUP 0
#define FULL_CLEANUP 1
static int mga_do_cleanup_dma(struct drm_device *dev, int full_cleanup);
/* ================================================================
* Engine control
*/
int mga_do_wait_for_idle(drm_mga_private_t * dev_priv)
{
u32 status = 0;
int i;
DRM_DEBUG("\n");
for (i = 0; i < dev_priv->usec_timeout; i++) {
status = MGA_READ(MGA_STATUS) & MGA_ENGINE_IDLE_MASK;
if (status == MGA_ENDPRDMASTS) {
MGA_WRITE8(MGA_CRTC_INDEX, 0);
return 0;
}
DRM_UDELAY(1);
}
#if MGA_DMA_DEBUG
DRM_ERROR("failed!\n");
DRM_INFO(" status=0x%08x\n", status);
#endif
return -EBUSY;
}
static int mga_do_dma_reset(drm_mga_private_t * dev_priv)
{
drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
drm_mga_primary_buffer_t *primary = &dev_priv->prim;
DRM_DEBUG("\n");
/* The primary DMA stream should look like new right about now.
*/
primary->tail = 0;
primary->space = primary->size;
primary->last_flush = 0;
sarea_priv->last_wrap = 0;
/* FIXME: Reset counters, buffer ages etc...
*/
/* FIXME: What else do we need to reinitialize? WARP stuff?
*/
return 0;
}
/* ================================================================
* Primary DMA stream
*/
void mga_do_dma_flush(drm_mga_private_t * dev_priv)
{
drm_mga_primary_buffer_t *primary = &dev_priv->prim;
u32 head, tail;
u32 status = 0;
int i;
DMA_LOCALS;
DRM_DEBUG("\n");
/* We need to wait so that we can do an safe flush */
for (i = 0; i < dev_priv->usec_timeout; i++) {
status = MGA_READ(MGA_STATUS) & MGA_ENGINE_IDLE_MASK;
if (status == MGA_ENDPRDMASTS)
break;
DRM_UDELAY(1);
}
if (primary->tail == primary->last_flush) {
DRM_DEBUG(" bailing out...\n");
return;
}
tail = primary->tail + dev_priv->primary->offset;
/* We need to pad the stream between flushes, as the card
* actually (partially?) reads the first of these commands.
* See page 4-16 in the G400 manual, middle of the page or so.
*/
BEGIN_DMA(1);
DMA_BLOCK(MGA_DMAPAD, 0x00000000,
MGA_DMAPAD, 0x00000000,
MGA_DMAPAD, 0x00000000, MGA_DMAPAD, 0x00000000);
ADVANCE_DMA();
primary->last_flush = primary->tail;
head = MGA_READ(MGA_PRIMADDRESS);
if (head <= tail) {
primary->space = primary->size - primary->tail;
} else {
primary->space = head - tail;
}
DRM_DEBUG(" head = 0x%06lx\n", head - dev_priv->primary->offset);
DRM_DEBUG(" tail = 0x%06lx\n", tail - dev_priv->primary->offset);
DRM_DEBUG(" space = 0x%06x\n", primary->space);
mga_flush_write_combine();
MGA_WRITE(MGA_PRIMEND, tail | dev_priv->dma_access);
DRM_DEBUG("done.\n");
}
void mga_do_dma_wrap_start(drm_mga_private_t * dev_priv)
{
drm_mga_primary_buffer_t *primary = &dev_priv->prim;
u32 head, tail;
DMA_LOCALS;
DRM_DEBUG("\n");
BEGIN_DMA_WRAP();
DMA_BLOCK(MGA_DMAPAD, 0x00000000,
MGA_DMAPAD, 0x00000000,
MGA_DMAPAD, 0x00000000, MGA_DMAPAD, 0x00000000);
ADVANCE_DMA();
tail = primary->tail + dev_priv->primary->offset;
primary->tail = 0;
primary->last_flush = 0;
primary->last_wrap++;
head = MGA_READ(MGA_PRIMADDRESS);
if (head == dev_priv->primary->offset) {
primary->space = primary->size;
} else {
primary->space = head - dev_priv->primary->offset;
}
DRM_DEBUG(" head = 0x%06lx\n", head - dev_priv->primary->offset);
DRM_DEBUG(" tail = 0x%06x\n", primary->tail);
DRM_DEBUG(" wrap = %d\n", primary->last_wrap);
DRM_DEBUG(" space = 0x%06x\n", primary->space);
mga_flush_write_combine();
MGA_WRITE(MGA_PRIMEND, tail | dev_priv->dma_access);
set_bit(0, &primary->wrapped);
DRM_DEBUG("done.\n");
}
void mga_do_dma_wrap_end(drm_mga_private_t * dev_priv)
{
drm_mga_primary_buffer_t *primary = &dev_priv->prim;
drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
u32 head = dev_priv->primary->offset;
DRM_DEBUG("\n");
sarea_priv->last_wrap++;
DRM_DEBUG(" wrap = %d\n", sarea_priv->last_wrap);
mga_flush_write_combine();
MGA_WRITE(MGA_PRIMADDRESS, head | MGA_DMA_GENERAL);
clear_bit(0, &primary->wrapped);
DRM_DEBUG("done.\n");
}
/* ================================================================
* Freelist management
*/
#define MGA_BUFFER_USED ~0
#define MGA_BUFFER_FREE 0
#if MGA_FREELIST_DEBUG
static void mga_freelist_print(struct drm_device * dev)
{
drm_mga_private_t *dev_priv = dev->dev_private;
drm_mga_freelist_t *entry;
DRM_INFO("\n");
DRM_INFO("current dispatch: last=0x%x done=0x%x\n",
dev_priv->sarea_priv->last_dispatch,
(unsigned int)(MGA_READ(MGA_PRIMADDRESS) -
dev_priv->primary->offset));
DRM_INFO("current freelist:\n");
for (entry = dev_priv->head->next; entry; entry = entry->next) {
DRM_INFO(" %p idx=%2d age=0x%x 0x%06lx\n",
entry, entry->buf->idx, entry->age.head,
entry->age.head - dev_priv->primary->offset);
}
DRM_INFO("\n");
}
#endif
static int mga_freelist_init(struct drm_device * dev, drm_mga_private_t * dev_priv)
{
struct drm_device_dma *dma = dev->dma;
struct drm_buf *buf;
drm_mga_buf_priv_t *buf_priv;
drm_mga_freelist_t *entry;
int i;
DRM_DEBUG("count=%d\n", dma->buf_count);
dev_priv->head = drm_alloc(sizeof(drm_mga_freelist_t), DRM_MEM_DRIVER);
if (dev_priv->head == NULL)
return -ENOMEM;
memset(dev_priv->head, 0, sizeof(drm_mga_freelist_t));
SET_AGE(&dev_priv->head->age, MGA_BUFFER_USED, 0);
for (i = 0; i < dma->buf_count; i++) {
buf = dma->buflist[i];
buf_priv = buf->dev_private;
entry = drm_alloc(sizeof(drm_mga_freelist_t), DRM_MEM_DRIVER);
if (entry == NULL)
return -ENOMEM;
memset(entry, 0, sizeof(drm_mga_freelist_t));
entry->next = dev_priv->head->next;
entry->prev = dev_priv->head;
SET_AGE(&entry->age, MGA_BUFFER_FREE, 0);
entry->buf = buf;
if (dev_priv->head->next != NULL)
dev_priv->head->next->prev = entry;
if (entry->next == NULL)
dev_priv->tail = entry;
buf_priv->list_entry = entry;
buf_priv->discard = 0;
buf_priv->dispatched = 0;
dev_priv->head->next = entry;
}
return 0;
}
static void mga_freelist_cleanup(struct drm_device * dev)
{
drm_mga_private_t *dev_priv = dev->dev_private;
drm_mga_freelist_t *entry;
drm_mga_freelist_t *next;
DRM_DEBUG("\n");
entry = dev_priv->head;
while (entry) {
next = entry->next;
drm_free(entry, sizeof(drm_mga_freelist_t), DRM_MEM_DRIVER);
entry = next;
}
dev_priv->head = dev_priv->tail = NULL;
}
#if 0
/* FIXME: Still needed?
*/
static void mga_freelist_reset(struct drm_device * dev)
{
drm_device_dma_t *dma = dev->dma;
struct drm_buf *buf;
drm_mga_buf_priv_t *buf_priv;
int i;
for (i = 0; i < dma->buf_count; i++) {
buf = dma->buflist[i];
buf_priv = buf->dev_private;
SET_AGE(&buf_priv->list_entry->age, MGA_BUFFER_FREE, 0);
}
}
#endif
static struct drm_buf *mga_freelist_get(struct drm_device * dev)
{
drm_mga_private_t *dev_priv = dev->dev_private;
drm_mga_freelist_t *next;
drm_mga_freelist_t *prev;
drm_mga_freelist_t *tail = dev_priv->tail;
u32 head, wrap;
DRM_DEBUG("\n");
head = MGA_READ(MGA_PRIMADDRESS);
wrap = dev_priv->sarea_priv->last_wrap;
DRM_DEBUG(" tail=0x%06lx %d\n",
tail->age.head ?
tail->age.head - dev_priv->primary->offset : 0,
tail->age.wrap);
DRM_DEBUG(" head=0x%06lx %d\n",
head - dev_priv->primary->offset, wrap);
if (TEST_AGE(&tail->age, head, wrap)) {
prev = dev_priv->tail->prev;
next = dev_priv->tail;
prev->next = NULL;
next->prev = next->next = NULL;
dev_priv->tail = prev;
SET_AGE(&next->age, MGA_BUFFER_USED, 0);
return next->buf;
}
DRM_DEBUG("returning NULL!\n");
return NULL;
}
int mga_freelist_put(struct drm_device * dev, struct drm_buf * buf)
{
drm_mga_private_t *dev_priv = dev->dev_private;
drm_mga_buf_priv_t *buf_priv = buf->dev_private;
drm_mga_freelist_t *head, *entry, *prev;
DRM_DEBUG("age=0x%06lx wrap=%d\n",
buf_priv->list_entry->age.head -
dev_priv->primary->offset, buf_priv->list_entry->age.wrap);
entry = buf_priv->list_entry;
head = dev_priv->head;
if (buf_priv->list_entry->age.head == MGA_BUFFER_USED) {
SET_AGE(&entry->age, MGA_BUFFER_FREE, 0);
prev = dev_priv->tail;
prev->next = entry;
entry->prev = prev;
entry->next = NULL;
} else {
prev = head->next;
head->next = entry;
prev->prev = entry;
entry->prev = head;
entry->next = prev;
}
return 0;
}
/* ================================================================
* DMA initialization, cleanup
*/
int mga_driver_load(struct drm_device *dev, unsigned long flags)
{
drm_mga_private_t *dev_priv;
int ret;
dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
if (!dev_priv)
return -ENOMEM;
dev->dev_private = (void *)dev_priv;
memset(dev_priv, 0, sizeof(drm_mga_private_t));
dev_priv->usec_timeout = MGA_DEFAULT_USEC_TIMEOUT;
dev_priv->chipset = flags;
dev_priv->mmio_base = drm_get_resource_start(dev, 1);
dev_priv->mmio_size = drm_get_resource_len(dev, 1);
dev->counters += 3;
dev->types[6] = _DRM_STAT_IRQ;
dev->types[7] = _DRM_STAT_PRIMARY;
dev->types[8] = _DRM_STAT_SECONDARY;
ret = drm_vblank_init(dev, 1);
if (ret) {
(void) mga_driver_unload(dev);
return ret;
}
return 0;
}
/**
* Bootstrap the driver for AGP DMA.
*
* \todo
* Investigate whether there is any benifit to storing the WARP microcode in
* AGP memory. If not, the microcode may as well always be put in PCI
* memory.
*
* \todo
* This routine needs to set dma_bs->agp_mode to the mode actually configured
* in the hardware. Looking just at the Linux AGP driver code, I don't see
* an easy way to determine this.
*
* \sa mga_do_dma_bootstrap, mga_do_pci_dma_bootstrap
*/
static int mga_do_agp_dma_bootstrap(struct drm_device *dev,
drm_mga_dma_bootstrap_t * dma_bs)
{
drm_mga_private_t *const dev_priv =
(drm_mga_private_t *)dev->dev_private;
unsigned int warp_size = mga_warp_microcode_size(dev_priv);
int err;
unsigned offset;
const unsigned secondary_size = dma_bs->secondary_bin_count
* dma_bs->secondary_bin_size;
const unsigned agp_size = (dma_bs->agp_size << 20);
struct drm_buf_desc req;
struct drm_agp_mode mode;
struct drm_agp_info info;
struct drm_agp_buffer agp_req;
struct drm_agp_binding bind_req;
/* Acquire AGP. */
err = drm_agp_acquire(dev);
if (err) {
DRM_ERROR("Unable to acquire AGP: %d\n", err);
return err;
}
err = drm_agp_info(dev, &info);
if (err) {
DRM_ERROR("Unable to get AGP info: %d\n", err);
return err;
}
mode.mode = (info.mode & ~0x07) | dma_bs->agp_mode;
err = drm_agp_enable(dev, mode);
if (err) {
DRM_ERROR("Unable to enable AGP (mode = 0x%lx)\n", mode.mode);
return err;
}
/* In addition to the usual AGP mode configuration, the G200 AGP cards
* need to have the AGP mode "manually" set.
*/
if (dev_priv->chipset == MGA_CARD_TYPE_G200) {
if (mode.mode & 0x02) {
MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_ENABLE);
} else {
MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_DISABLE);
}
}
/* Allocate and bind AGP memory. */
agp_req.size = agp_size;
agp_req.type = 0;
err = drm_agp_alloc(dev, &agp_req);
if (err) {
dev_priv->agp_size = 0;
DRM_ERROR("Unable to allocate %uMB AGP memory\n",
dma_bs->agp_size);
return err;
}
dev_priv->agp_size = agp_size;
dev_priv->agp_handle = agp_req.handle;
bind_req.handle = agp_req.handle;
bind_req.offset = 0;
err = drm_agp_bind( dev, &bind_req );
if (err) {
DRM_ERROR("Unable to bind AGP memory: %d\n", err);
return err;
}
/* Make drm_addbufs happy by not trying to create a mapping for less
* than a page.
*/
if (warp_size < PAGE_SIZE)
warp_size = PAGE_SIZE;
offset = 0;
err = drm_addmap(dev, offset, warp_size,
_DRM_AGP, _DRM_READ_ONLY, &dev_priv->warp);
if (err) {
DRM_ERROR("Unable to map WARP microcode: %d\n", err);
return err;
}
offset += warp_size;
err = drm_addmap(dev, offset, dma_bs->primary_size,
_DRM_AGP, _DRM_READ_ONLY, & dev_priv->primary);
if (err) {
DRM_ERROR("Unable to map primary DMA region: %d\n", err);
return err;
}
offset += dma_bs->primary_size;
err = drm_addmap(dev, offset, secondary_size,
_DRM_AGP, 0, & dev->agp_buffer_map);
if (err) {
DRM_ERROR("Unable to map secondary DMA region: %d\n", err);
return err;
}
(void)memset( &req, 0, sizeof(req) );
req.count = dma_bs->secondary_bin_count;
req.size = dma_bs->secondary_bin_size;
req.flags = _DRM_AGP_BUFFER;
req.agp_start = offset;
err = drm_addbufs_agp(dev, &req);
if (err) {
DRM_ERROR("Unable to add secondary DMA buffers: %d\n", err);
return err;
}
#ifdef __linux__
{
struct drm_map_list *_entry;
unsigned long agp_token = 0;
list_for_each_entry(_entry, &dev->maplist, head) {
if (_entry->map == dev->agp_buffer_map)
agp_token = _entry->user_token;
}
if (!agp_token)
return -EFAULT;
dev->agp_buffer_token = agp_token;
}
#endif
offset += secondary_size;
err = drm_addmap(dev, offset, agp_size - offset,
_DRM_AGP, 0, & dev_priv->agp_textures);
if (err) {
DRM_ERROR("Unable to map AGP texture region: %d\n", err);
return err;
}
drm_core_ioremap(dev_priv->warp, dev);
drm_core_ioremap(dev_priv->primary, dev);
drm_core_ioremap(dev->agp_buffer_map, dev);
if (!dev_priv->warp->handle ||
!dev_priv->primary->handle || !dev->agp_buffer_map->handle) {
DRM_ERROR("failed to ioremap agp regions! (%p, %p, %p)\n",
dev_priv->warp->handle, dev_priv->primary->handle,
dev->agp_buffer_map->handle);
return -ENOMEM;
}
dev_priv->dma_access = MGA_PAGPXFER;
dev_priv->wagp_enable = MGA_WAGP_ENABLE;
DRM_INFO("Initialized card for AGP DMA.\n");
return 0;
}
/**
* Bootstrap the driver for PCI DMA.
*
* \todo
* The algorithm for decreasing the size of the primary DMA buffer could be
* better. The size should be rounded up to the nearest page size, then
* decrease the request size by a single page each pass through the loop.
*
* \todo
* Determine whether the maximum address passed to drm_pci_alloc is correct.
* The same goes for drm_addbufs_pci.
*
* \sa mga_do_dma_bootstrap, mga_do_agp_dma_bootstrap
*/
static int mga_do_pci_dma_bootstrap(struct drm_device * dev,
drm_mga_dma_bootstrap_t * dma_bs)
{
drm_mga_private_t *const dev_priv =
(drm_mga_private_t *) dev->dev_private;
unsigned int warp_size = mga_warp_microcode_size(dev_priv);
unsigned int primary_size;
unsigned int bin_count;
int err;
struct drm_buf_desc req;
if (dev->dma == NULL) {
DRM_ERROR("dev->dma is NULL\n");
return -EFAULT;
}
/* Make drm_addbufs happy by not trying to create a mapping for less
* than a page.
*/
if (warp_size < PAGE_SIZE)
warp_size = PAGE_SIZE;
/* The proper alignment is 0x100 for this mapping */
err = drm_addmap(dev, 0, warp_size, _DRM_CONSISTENT,
_DRM_READ_ONLY, &dev_priv->warp);
if (err != 0) {
DRM_ERROR("Unable to create mapping for WARP microcode: %d\n",
err);
return err;
}
/* Other than the bottom two bits being used to encode other
* information, there don't appear to be any restrictions on the
* alignment of the primary or secondary DMA buffers.
*/
for (primary_size = dma_bs->primary_size; primary_size != 0;
primary_size >>= 1 ) {
/* The proper alignment for this mapping is 0x04 */
err = drm_addmap(dev, 0, primary_size, _DRM_CONSISTENT,
_DRM_READ_ONLY, &dev_priv->primary);
if (!err)
break;
}
if (err != 0) {
DRM_ERROR("Unable to allocate primary DMA region: %d\n", err);
return -ENOMEM;
}
if (dev_priv->primary->size != dma_bs->primary_size) {
DRM_INFO("Primary DMA buffer size reduced from %u to %u.\n",
dma_bs->primary_size,
(unsigned)dev_priv->primary->size);
dma_bs->primary_size = dev_priv->primary->size;
}
for (bin_count = dma_bs->secondary_bin_count; bin_count > 0;
bin_count-- ) {
(void)memset(&req, 0, sizeof(req));
req.count = bin_count;
req.size = dma_bs->secondary_bin_size;
err = drm_addbufs_pci(dev, &req);
if (!err) {
break;
}
}
if (bin_count == 0) {
DRM_ERROR("Unable to add secondary DMA buffers: %d\n", err);
return err;
}
if (bin_count != dma_bs->secondary_bin_count) {
DRM_INFO("Secondary PCI DMA buffer bin count reduced from %u "
"to %u.\n", dma_bs->secondary_bin_count, bin_count);
dma_bs->secondary_bin_count = bin_count;
}
dev_priv->dma_access = 0;
dev_priv->wagp_enable = 0;
dma_bs->agp_mode = 0;
DRM_INFO("Initialized card for PCI DMA.\n");
return 0;
}
static int mga_do_dma_bootstrap(struct drm_device *dev,
drm_mga_dma_bootstrap_t *dma_bs)
{
const int is_agp = (dma_bs->agp_mode != 0) && drm_device_is_agp(dev);
int err;
drm_mga_private_t *const dev_priv =
(drm_mga_private_t *) dev->dev_private;
dev_priv->used_new_dma_init = 1;
/* The first steps are the same for both PCI and AGP based DMA. Map
* the cards MMIO registers and map a status page.
*/
err = drm_addmap(dev, dev_priv->mmio_base, dev_priv->mmio_size,
_DRM_REGISTERS, _DRM_READ_ONLY, & dev_priv->mmio);
if (err) {
DRM_ERROR("Unable to map MMIO region: %d\n", err);
return err;
}
err = drm_addmap(dev, 0, SAREA_MAX, _DRM_SHM,
_DRM_READ_ONLY | _DRM_LOCKED | _DRM_KERNEL,
& dev_priv->status);
if (err) {
DRM_ERROR("Unable to map status region: %d\n", err);
return err;
}
/* The DMA initialization procedure is slightly different for PCI and
* AGP cards. AGP cards just allocate a large block of AGP memory and
* carve off portions of it for internal uses. The remaining memory
* is returned to user-mode to be used for AGP textures.
*/
if (is_agp) {
err = mga_do_agp_dma_bootstrap(dev, dma_bs);
}
/* If we attempted to initialize the card for AGP DMA but failed,
* clean-up any mess that may have been created.
*/
if (err) {
mga_do_cleanup_dma(dev, MINIMAL_CLEANUP);
}
/* Not only do we want to try and initialized PCI cards for PCI DMA,
* but we also try to initialized AGP cards that could not be
* initialized for AGP DMA. This covers the case where we have an AGP
* card in a system with an unsupported AGP chipset. In that case the
* card will be detected as AGP, but we won't be able to allocate any
* AGP memory, etc.
*/
if (!is_agp || err) {
err = mga_do_pci_dma_bootstrap(dev, dma_bs);
}
return err;
}
int mga_dma_bootstrap(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_mga_dma_bootstrap_t *bootstrap = data;
int err;
static const int modes[] = { 0, 1, 2, 2, 4, 4, 4, 4 };
const drm_mga_private_t *const dev_priv =
(drm_mga_private_t *) dev->dev_private;
err = mga_do_dma_bootstrap(dev, bootstrap);
if (err) {
mga_do_cleanup_dma(dev, FULL_CLEANUP);
return err;
}
if (dev_priv->agp_textures != NULL) {
bootstrap->texture_handle = dev_priv->agp_textures->offset;
bootstrap->texture_size = dev_priv->agp_textures->size;
} else {
bootstrap->texture_handle = 0;
bootstrap->texture_size = 0;
}
bootstrap->agp_mode = modes[bootstrap->agp_mode & 0x07];
return 0;
}
static int mga_do_init_dma(struct drm_device * dev, drm_mga_init_t * init)
{
drm_mga_private_t *dev_priv;
int ret;
DRM_DEBUG("\n");
dev_priv = dev->dev_private;
if (init->sgram) {
dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_BLK;
} else {
dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_RSTR;
}
dev_priv->maccess = init->maccess;
dev_priv->fb_cpp = init->fb_cpp;
dev_priv->front_offset = init->front_offset;
dev_priv->front_pitch = init->front_pitch;
dev_priv->back_offset = init->back_offset;
dev_priv->back_pitch = init->back_pitch;
dev_priv->depth_cpp = init->depth_cpp;
dev_priv->depth_offset = init->depth_offset;
dev_priv->depth_pitch = init->depth_pitch;
/* FIXME: Need to support AGP textures...
*/
dev_priv->texture_offset = init->texture_offset[0];
dev_priv->texture_size = init->texture_size[0];
dev_priv->sarea = drm_getsarea(dev);
if (!dev_priv->sarea) {
DRM_ERROR("failed to find sarea!\n");
return -EINVAL;
}
if (!dev_priv->used_new_dma_init) {
dev_priv->dma_access = MGA_PAGPXFER;
dev_priv->wagp_enable = MGA_WAGP_ENABLE;
dev_priv->status = drm_core_findmap(dev, init->status_offset);
if (!dev_priv->status) {
DRM_ERROR("failed to find status page!\n");
return -EINVAL;
}
dev_priv->mmio = drm_core_findmap(dev, init->mmio_offset);
if (!dev_priv->mmio) {
DRM_ERROR("failed to find mmio region!\n");
return -EINVAL;
}
dev_priv->warp = drm_core_findmap(dev, init->warp_offset);
if (!dev_priv->warp) {
DRM_ERROR("failed to find warp microcode region!\n");
return -EINVAL;
}
dev_priv->primary = drm_core_findmap(dev, init->primary_offset);
if (!dev_priv->primary) {
DRM_ERROR("failed to find primary dma region!\n");
return -EINVAL;
}
dev->agp_buffer_token = init->buffers_offset;
dev->agp_buffer_map =
drm_core_findmap(dev, init->buffers_offset);
if (!dev->agp_buffer_map) {
DRM_ERROR("failed to find dma buffer region!\n");
return -EINVAL;
}
drm_core_ioremap(dev_priv->warp, dev);
drm_core_ioremap(dev_priv->primary, dev);
drm_core_ioremap(dev->agp_buffer_map, dev);
}
dev_priv->sarea_priv =
(drm_mga_sarea_t *) ((u8 *) dev_priv->sarea->handle +
init->sarea_priv_offset);
if (!dev_priv->warp->handle ||
!dev_priv->primary->handle ||
((dev_priv->dma_access != 0) &&
((dev->agp_buffer_map == NULL) ||
(dev->agp_buffer_map->handle == NULL)))) {
DRM_ERROR("failed to ioremap agp regions!\n");
return -ENOMEM;
}
ret = mga_warp_install_microcode(dev_priv);
if (ret != 0) {
DRM_ERROR("failed to install WARP ucode: %d!\n", ret);
return ret;
}
ret = mga_warp_init(dev_priv);
if (ret != 0) {
DRM_ERROR("failed to init WARP engine: %d!\n", ret);
return ret;
}
dev_priv->prim.status = (u32 *) dev_priv->status->handle;
mga_do_wait_for_idle(dev_priv);
/* Init the primary DMA registers.
*/
MGA_WRITE(MGA_PRIMADDRESS, dev_priv->primary->offset | MGA_DMA_GENERAL);
dev_priv->prim.start = (u8 *) dev_priv->primary->handle;
dev_priv->prim.end = ((u8 *) dev_priv->primary->handle
+ dev_priv->primary->size);
dev_priv->prim.size = dev_priv->primary->size;
dev_priv->prim.tail = 0;
dev_priv->prim.space = dev_priv->prim.size;
dev_priv->prim.wrapped = 0;
dev_priv->prim.last_flush = 0;
dev_priv->prim.last_wrap = 0;
dev_priv->prim.high_mark = 256 * DMA_BLOCK_SIZE;
dev_priv->prim.status[0] = dev_priv->primary->offset;
dev_priv->prim.status[1] = 0;
dev_priv->sarea_priv->last_wrap = 0;
dev_priv->sarea_priv->last_frame.head = 0;
dev_priv->sarea_priv->last_frame.wrap = 0;
if (mga_freelist_init(dev, dev_priv) < 0) {
DRM_ERROR("could not initialize freelist\n");
return -ENOMEM;
}
return 0;
}
static int mga_do_cleanup_dma(struct drm_device *dev, int full_cleanup)
{
int err = 0;
DRM_DEBUG("\n");
/* Make sure interrupts are disabled here because the uninstall ioctl
* may not have been called from userspace and after dev_private
* is freed, it's too late.
*/
if (dev->irq_enabled)
drm_irq_uninstall(dev);
if (dev->dev_private) {
drm_mga_private_t *dev_priv = dev->dev_private;
if ((dev_priv->warp != NULL)
&& (dev_priv->warp->type != _DRM_CONSISTENT))
drm_core_ioremapfree(dev_priv->warp, dev);
if ((dev_priv->primary != NULL)
&& (dev_priv->primary->type != _DRM_CONSISTENT))
drm_core_ioremapfree(dev_priv->primary, dev);
if (dev->agp_buffer_map != NULL)
drm_core_ioremapfree(dev->agp_buffer_map, dev);
if (dev_priv->used_new_dma_init) {
if (dev_priv->agp_handle != 0) {
struct drm_agp_binding unbind_req;
struct drm_agp_buffer free_req;
unbind_req.handle = dev_priv->agp_handle;
drm_agp_unbind(dev, &unbind_req);
free_req.handle = dev_priv->agp_handle;
drm_agp_free(dev, &free_req);
dev_priv->agp_textures = NULL;
dev_priv->agp_size = 0;
dev_priv->agp_handle = 0;
}
if ((dev->agp != NULL) && dev->agp->acquired) {
err = drm_agp_release(dev);
}
}
dev_priv->warp = NULL;
dev_priv->primary = NULL;
dev_priv->sarea = NULL;
dev_priv->sarea_priv = NULL;
dev->agp_buffer_map = NULL;
if (full_cleanup) {
dev_priv->mmio = NULL;
dev_priv->status = NULL;
dev_priv->used_new_dma_init = 0;
}
memset(&dev_priv->prim, 0, sizeof(dev_priv->prim));
dev_priv->warp_pipe = 0;
memset(dev_priv->warp_pipe_phys, 0,
sizeof(dev_priv->warp_pipe_phys));
if (dev_priv->head != NULL) {
mga_freelist_cleanup(dev);
}
}
return err;
}
int mga_dma_init(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_mga_init_t *init = data;
int err;
LOCK_TEST_WITH_RETURN(dev, file_priv);
switch (init->func) {
case MGA_INIT_DMA:
err = mga_do_init_dma(dev, init);
if (err) {
(void)mga_do_cleanup_dma(dev, FULL_CLEANUP);
}
return err;
case MGA_CLEANUP_DMA:
return mga_do_cleanup_dma(dev, FULL_CLEANUP);
}
return -EINVAL;
}
/* ================================================================
* Primary DMA stream management
*/
int mga_dma_flush(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
struct drm_lock *lock = data;
LOCK_TEST_WITH_RETURN(dev, file_priv);
DRM_DEBUG("%s%s%s\n",
(lock->flags & _DRM_LOCK_FLUSH) ? "flush, " : "",
(lock->flags & _DRM_LOCK_FLUSH_ALL) ? "flush all, " : "",
(lock->flags & _DRM_LOCK_QUIESCENT) ? "idle, " : "");
WRAP_WAIT_WITH_RETURN(dev_priv);
if (lock->flags & (_DRM_LOCK_FLUSH | _DRM_LOCK_FLUSH_ALL)) {
mga_do_dma_flush(dev_priv);
}
if (lock->flags & _DRM_LOCK_QUIESCENT) {
#if MGA_DMA_DEBUG
int ret = mga_do_wait_for_idle(dev_priv);
if (ret < 0)
DRM_INFO("-EBUSY\n");
return ret;
#else
return mga_do_wait_for_idle(dev_priv);
#endif
} else {
return 0;
}
}
int mga_dma_reset(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
LOCK_TEST_WITH_RETURN(dev, file_priv);
return mga_do_dma_reset(dev_priv);
}
/* ================================================================
* DMA buffer management
*/
static int mga_dma_get_buffers(struct drm_device * dev,
struct drm_file *file_priv, struct drm_dma * d)
{
struct drm_buf *buf;
int i;
for (i = d->granted_count; i < d->request_count; i++) {
buf = mga_freelist_get(dev);
if (!buf)
return -EAGAIN;
buf->file_priv = file_priv;
if (DRM_COPY_TO_USER(&d->request_indices[i],
&buf->idx, sizeof(buf->idx)))
return -EFAULT;
if (DRM_COPY_TO_USER(&d->request_sizes[i],
&buf->total, sizeof(buf->total)))
return -EFAULT;
d->granted_count++;
}
return 0;
}
int mga_dma_buffers(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_device_dma *dma = dev->dma;
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
struct drm_dma *d = data;
int ret = 0;
LOCK_TEST_WITH_RETURN(dev, file_priv);
/* Please don't send us buffers.
*/
if (d->send_count != 0) {
DRM_ERROR("Process %d trying to send %d buffers via drmDMA\n",
DRM_CURRENTPID, d->send_count);
return -EINVAL;
}
/* We'll send you buffers.
*/
if (d->request_count < 0 || d->request_count > dma->buf_count) {
DRM_ERROR("Process %d trying to get %d buffers (of %d max)\n",
DRM_CURRENTPID, d->request_count, dma->buf_count);
return -EINVAL;
}
WRAP_TEST_WITH_RETURN(dev_priv);
d->granted_count = 0;
if (d->request_count) {
ret = mga_dma_get_buffers(dev, file_priv, d);
}
return ret;
}
/**
* Called just before the module is unloaded.
*/
int mga_driver_unload(struct drm_device * dev)
{
drm_free(dev->dev_private, sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
dev->dev_private = NULL;
return 0;
}
/**
* Called when the last opener of the device is closed.
*/
void mga_driver_lastclose(struct drm_device * dev)
{
mga_do_cleanup_dma(dev, FULL_CLEANUP);
}
int mga_driver_dma_quiescent(struct drm_device * dev)
{
drm_mga_private_t *dev_priv = dev->dev_private;
return mga_do_wait_for_idle(dev_priv);
}