d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
269b3a8211
freebsd-skq/sys/dev/amr/amrreg.h
Mike Smith 29e79e51ee Probe generic i960 devices for the old AMI signature as well as the current 
one, in order to support adapters with older firmware.

Submitted by:	"Prasanth S." <prasanths@ami.co.in>
2000-12-22 22:23:56 +00:00

546 lines
19 KiB
C
Raw Blame History

/*-
* Copyright (c) 1999,2000 Michael Smith
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/********************************************************************************
********************************************************************************
Driver parameters
********************************************************************************
********************************************************************************/
/*
* We could actually use all 17 segments, but using only 16 means that
* each scatter/gather map is 128 bytes in size, and thus we don't have to worry about
* maps crossing page boundaries.
*
* The AMI documentation says that the limit is 26. Unfortunately, there's no way to
* cleanly fit more than 16 entries in without a page boundary. But is this a concern,
* since we allocate the s/g maps contiguously anyway?
*/
#define AMR_NSEG 16
#define AMR_MAXCMD 255 /* ident = 0 not allowed */
#define AMR_LIMITCMD 120 /* maximum count of outstanding commands */
#define AMR_MAXLD 40
#define AMR_MAX_CHANNELS 4
#define AMR_MAX_TARGETS 15
#define AMR_MAX_LUNS 7
#define AMR_MAX_SCSI_CMDS (15 * AMR_MAX_CHANNELS) /* one for every target? */
#define AMR_MAX_CDB_LEN 0x0a
#define AMR_MAX_REQ_SENSE_LEN 0x20
#define AMR_BLKSIZE 512 /* constant for all controllers */
/*
* Perform at-startup board initialisation.
* At this point in time, this code doesn't work correctly, so leave it disabled.
*/
/*#define AMR_BOARD_INIT*/
/********************************************************************************
********************************************************************************
Interface Magic Numbers
********************************************************************************
********************************************************************************/
/*
* Mailbox commands
*/
#define AMR_CMD_LREAD 0x01
#define AMR_CMD_LWRITE 0x02
#define AMR_CMD_PASS 0x03
#define AMR_CMD_EXT_ENQUIRY 0x04
#define AMR_CMD_ENQUIRY 0x05
#define AMR_CMD_FLUSH 0x0a
#define AMR_CMD_EXT_ENQUIRY2 0x0c
#define AMR_CONFIG_PRODINFO 0x0e
#define AMR_CMD_GET_MACHINEID 0x36
#define AMR_CMD_GET_INITIATOR 0x7d /* returns one byte */
#define AMR_CMD_CONFIG 0xa1
#define AMR_CONFIG_PRODUCT_INFO 0x0e
#define AMR_CONFIG_ENQ3 0x0f
#define AMR_CONFIG_ENQ3_SOLICITED_NOTIFY 0x01
#define AMR_CONFIG_ENQ3_SOLICITED_FULL 0x02
#define AMR_CONFIG_ENQ3_UNSOLICITED 0x03
/*
* Command results
*/
#define AMR_STATUS_SUCCESS 0x00
#define AMR_STATUS_ABORTED 0x02
#define AMR_STATUS_FAILED 0x80
/*
* Physical/logical drive states
*/
#define AMR_DRV_CURSTATE(x) ((x) & 0x0f)
#define AMR_DRV_PREVSTATE(x) (((x) >> 4) & 0x0f)
#define AMR_DRV_OFFLINE 0x00
#define AMR_DRV_DEGRADED 0x01
#define AMR_DRV_OPTIMAL 0x02
#define AMR_DRV_ONLINE 0x03
#define AMR_DRV_FAILED 0x04
#define AMR_DRV_REBUILD 0x05
#define AMR_DRV_HOTSPARE 0x06
/*
* Logical drive properties
*/
#define AMR_DRV_RAID_MASK 0x0f /* RAID level 0, 1, 3, 5, etc. */
#define AMR_DRV_WRITEBACK 0x10 /* write-back enabled */
#define AMR_DRV_READHEAD 0x20 /* readhead policy enabled */
#define AMR_DRV_ADAPTIVE 0x40 /* adaptive I/O policy enabled */
/*
* Battery status
*/
#define AMR_BATT_MODULE_MISSING 0x01
#define AMR_BATT_LOW_VOLTAGE 0x02
#define AMR_BATT_TEMP_HIGH 0x04
#define AMR_BATT_PACK_MISSING 0x08
#define AMR_BATT_CHARGE_MASK 0x30
#define AMR_BATT_CHARGE_DONE 0x00
#define AMR_BATT_CHARGE_INPROG 0x10
#define AMR_BATT_CHARGE_FAIL 0x20
#define AMR_BATT_CYCLES_EXCEEDED 0x40
/********************************************************************************
********************************************************************************
8LD Firmware Interface
********************************************************************************
********************************************************************************/
/*
* Array constraints
*/
#define AMR_8LD_MAXDRIVES 8
#define AMR_8LD_MAXCHAN 5
#define AMR_8LD_MAXTARG 15
#define AMR_8LD_MAXPHYSDRIVES (AMR_8LD_MAXCHAN * AMR_8LD_MAXTARG)
/*
* Adapter Info structure
*/
struct amr_adapter_info
{
u_int8_t aa_maxio;
u_int8_t aa_rebuild_rate;
u_int8_t aa_maxtargchan;
u_int8_t aa_channels;
u_int8_t aa_firmware[4];
u_int16_t aa_flashage;
u_int8_t aa_chipsetvalue;
u_int8_t aa_memorysize;
u_int8_t aa_cacheflush;
u_int8_t aa_bios[4];
u_int8_t aa_boardtype;
u_int8_t aa_scsisensealert;
u_int8_t aa_writeconfigcount;
u_int8_t aa_driveinsertioncount;
u_int8_t aa_inserteddrive;
u_int8_t aa_batterystatus;
u_int8_t res1;
} __attribute__ ((packed));
/*
* Logical Drive info structure
*/
struct amr_logdrive_info
{
u_int8_t al_numdrives;
u_int8_t res1[3];
u_int32_t al_size[AMR_8LD_MAXDRIVES];
u_int8_t al_properties[AMR_8LD_MAXDRIVES];
u_int8_t al_state[AMR_8LD_MAXDRIVES];
} __attribute__ ((packed));
/*
* Physical Drive info structure
*/
struct amr_physdrive_info
{
u_int8_t ap_state[AMR_8LD_MAXPHYSDRIVES]; /* low nibble current state, high nibble previous state */
u_int8_t ap_predictivefailure;
} __attribute__ ((packed));
/*
* Enquiry response structure for AMR_CMD_ENQUIRY, AMR_CMD_EXT_ENQUIRY and
* AMR_CMD_EXT_ENQUIRY2.
* ENQUIRY EXT_ENQUIRY EXT_ENQUIRY2
*/
struct amr_enquiry
{
struct amr_adapter_info ae_adapter; /* X X X */
struct amr_logdrive_info ae_ldrv; /* X X X */
struct amr_physdrive_info ae_pdrv; /* X X X */
u_int8_t ae_formatting[AMR_8LD_MAXDRIVES];/* X X */
u_int8_t res1[AMR_8LD_MAXDRIVES]; /* X X */
u_int32_t ae_extlen; /* X */
u_int16_t ae_subsystem; /* X */
u_int16_t ae_subvendor; /* X */
u_int32_t ae_signature; /* X */
#define AMR_SIG_431 0xfffe0001
#define AMR_SIG_438 0xfffd0002
#define AMR_SIG_762 0xfffc0003
#define AMR_SIG_T5 0xfffb0004
#define AMR_SIG_466 0xfffa0005
#define AMR_SIG_467 0xfff90006
#define AMR_SIG_T7 0xfff80007
#define AMR_SIG_490 0xfff70008
u_int8_t res2[844]; /* X */
} __attribute__ ((packed));
/********************************************************************************
********************************************************************************
40LD Firmware Interface
********************************************************************************
********************************************************************************/
/*
* Array constraints
*/
#define AMR_40LD_MAXDRIVES 40
#define AMR_40LD_MAXCHAN 16
#define AMR_40LD_MAXTARG 16
#define AMR_40LD_MAXPHYSDRIVES 256
/*
* Product Info structure
*/
struct amr_prodinfo
{
u_int32_t ap_size; /* current size in bytes (not including resvd) */
u_int32_t ap_configsig; /* default is 0x00282008, indicating 0x28 maximum
* logical drives, 0x20 maximum stripes and 0x08
* maximum spans */
u_int8_t ap_firmware[16]; /* printable identifiers */
u_int8_t ap_bios[16];
u_int8_t ap_product[80];
u_int8_t ap_maxio; /* maximum number of concurrent commands supported */
u_int8_t ap_nschan; /* number of SCSI channels present */
u_int8_t ap_fcloops; /* number of fibre loops present */
u_int8_t ap_memtype; /* memory type */
u_int32_t ap_signature;
u_int16_t ap_memsize; /* onboard memory in MB */
u_int16_t ap_subsystem; /* subsystem identifier */
u_int16_t ap_subvendor; /* subsystem vendor ID */
u_int8_t ap_numnotifyctr; /* number of notify counters */
} __attribute__((packed));
/*
* Notify structure
*/
struct amr_notify
{
u_int32_t an_globalcounter; /* change counter */
u_int8_t an_paramcounter; /* parameter change counter */
u_int8_t an_paramid;
#define AMR_PARAM_REBUILD_RATE 0x01 /* value = new rebuild rate */
#define AMR_PARAM_FLUSH_INTERVAL 0x02 /* value = new flush interval */
#define AMR_PARAM_SENSE_ALERT 0x03 /* value = last physical drive with check condition set */
#define AMR_PARAM_DRIVE_INSERTED 0x04 /* value = last physical drive inserted */
#define AMR_PARAM_BATTERY_STATUS 0x05 /* value = battery status */
u_int16_t an_paramval;
u_int8_t an_writeconfigcounter; /* write config occurred */
u_int8_t res1[3];
u_int8_t an_ldrvopcounter; /* logical drive operation started/completed */
u_int8_t an_ldrvopid;
u_int8_t an_ldrvopcmd;
#define AMR_LDRVOP_CHECK 0x01
#define AMR_LDRVOP_INIT 0x02
#define AMR_LDRVOP_REBUILD 0x03
u_int8_t an_ldrvopstatus;
#define AMR_LDRVOP_SUCCESS 0x00
#define AMR_LDRVOP_FAILED 0x01
#define AMR_LDRVOP_ABORTED 0x02
#define AMR_LDRVOP_CORRECTED 0x03
#define AMR_LDRVOP_STARTED 0x04
u_int8_t an_ldrvstatecounter; /* logical drive state change occurred */
u_int8_t an_ldrvstateid;
u_int8_t an_ldrvstatenew;
u_int8_t an_ldrvstateold;
u_int8_t an_pdrvstatecounter; /* physical drive state change occurred */
u_int8_t an_pdrvstateid;
u_int8_t an_pdrvstatenew;
u_int8_t an_pdrvstateold;
u_int8_t an_pdrvfmtcounter;
u_int8_t an_pdrvfmtid;
u_int8_t an_pdrvfmtval;
#define AMR_FORMAT_START 0x01
#define AMR_FORMAT_COMPLETE 0x02
u_int8_t res2;
u_int8_t an_targxfercounter; /* scsi xfer rate change */
u_int8_t an_targxferid;
u_int8_t an_targxferval;
u_int8_t res3;
u_int8_t an_fcloopidcounter; /* FC/AL loop ID changed */
u_int8_t an_fcloopidpdrvid;
u_int8_t an_fcloopid0;
u_int8_t an_fcloopid1;
u_int8_t an_fcloopstatecounter; /* FC/AL loop status changed */
u_int8_t an_fcloopstate0;
u_int8_t an_fcloopstate1;
u_int8_t res4;
} __attribute__((packed));
/*
* Enquiry3 structure
*/
struct amr_enquiry3
{
u_int32_t ae_datasize; /* valid data size in this structure */
union { /* event notify structure */
struct amr_notify n;
u_int8_t pad[0x80];
} ae_notify;
u_int8_t ae_rebuildrate; /* current rebuild rate in % */
u_int8_t ae_cacheflush; /* flush interval in seconds */
u_int8_t ae_sensealert;
u_int8_t ae_driveinsertcount; /* count of inserted drives */
u_int8_t ae_batterystatus;
u_int8_t ae_numldrives;
u_int8_t ae_reconstate[AMR_40LD_MAXDRIVES / 8]; /* reconstruction state */
u_int16_t ae_opstatus[AMR_40LD_MAXDRIVES / 8]; /* operation status per drive */
u_int32_t ae_drivesize[AMR_40LD_MAXDRIVES]; /* logical drive size */
u_int8_t ae_driveprop[AMR_40LD_MAXDRIVES]; /* logical drive properties */
u_int8_t ae_drivestate[AMR_40LD_MAXDRIVES]; /* physical drive state */
u_int16_t ae_driveformat[AMR_40LD_MAXPHYSDRIVES];
u_int8_t ae_targxfer[80]; /* physical drive transfer rates */
u_int8_t res1[263]; /* pad to 1024 bytes */
} __attribute__ ((packed));
/********************************************************************************
********************************************************************************
Mailbox and Command Structures
********************************************************************************
********************************************************************************/
#define AMR_MBOX_CMDSIZE 0x10 /* portion worth copying for controller */
struct amr_mailbox
{
u_int8_t mb_command;
u_int8_t mb_ident;
u_int16_t mb_blkcount;
u_int32_t mb_lba;
u_int32_t mb_physaddr;
u_int8_t mb_drive;
u_int8_t mb_nsgelem;
u_int8_t res1;
u_int8_t mb_busy;
u_int8_t mb_nstatus;
u_int8_t mb_status;
u_int8_t mb_completed[46];
u_int8_t mb_poll;
u_int8_t mb_ack;
u_int8_t res2[16];
} __attribute__ ((packed));
struct amr_mailbox64
{
u_int32_t mb64_segment; /* for 64-bit controllers */
struct amr_mailbox mb;
} __attribute__ ((packed));
struct amr_mailbox_ioctl
{
u_int8_t mb_command;
u_int8_t mb_ident;
u_int8_t mb_channel;
u_int8_t mb_param;
u_int8_t mb_pad[4];
u_int32_t mb_physaddr;
u_int8_t mb_drive;
u_int8_t mb_nsgelem;
u_int8_t res1;
u_int8_t mb_busy;
u_int8_t mb_nstatus;
u_int8_t mb_completed[46];
u_int8_t mb_poll;
u_int8_t mb_ack;
u_int8_t res4[16];
} __attribute__ ((packed));
struct amr_sgentry
{
u_int32_t sg_addr;
u_int32_t sg_count;
} __attribute__ ((packed));
struct amr_passthrough
{
u_int8_t ap_timeout:3;
u_int8_t ap_ars:1;
u_int8_t ap_dummy:3;
u_int8_t ap_islogical:1;
u_int8_t ap_logical_drive_no;
u_int8_t ap_channel;
u_int8_t ap_scsi_id;
u_int8_t ap_queue_tag;
u_int8_t ap_queue_action;
u_int8_t ap_cdb[AMR_MAX_CDB_LEN];
u_int8_t ap_cdb_length;
u_int8_t ap_request_sense_length;
u_int8_t ap_request_sense_area[AMR_MAX_REQ_SENSE_LEN];
u_int8_t ap_no_sg_elements;
u_int8_t ap_scsi_status;
u_int32_t ap_data_transfer_address;
u_int32_t ap_data_transfer_length;
} __attribute__ ((packed));
#ifdef _KERNEL
/********************************************************************************
********************************************************************************
"Quartz" i960 PCI bridge interface
********************************************************************************
********************************************************************************/
#define AMR_CFG_SIG 0xa0 /* PCI config register for signature */
#define AMR_SIGNATURE_1 0xCCCC /* i960 signature (older adapters) */
#define AMR_SIGNATURE_2 0x3344 /* i960 signature (newer adapters) */
/*
* Doorbell registers
*/
#define AMR_QIDB 0x20
#define AMR_QODB 0x2c
#define AMR_QIDB_SUBMIT 0x00000001 /* mailbox ready for work */
#define AMR_QIDB_ACK 0x00000002 /* mailbox done */
#define AMR_QODB_READY 0x10001234 /* work ready to be processed */
/*
* Initialisation status
*/
#define AMR_QINIT_SCAN 0x01 /* init scanning drives */
#define AMR_QINIT_SCANINIT 0x02 /* init scanning initialising */
#define AMR_QINIT_FIRMWARE 0x03 /* init firmware initing */
#define AMR_QINIT_INPROG 0xdc /* init in progress */
#define AMR_QINIT_SPINUP 0x2c /* init spinning drives */
#define AMR_QINIT_NOMEM 0xac /* insufficient memory */
#define AMR_QINIT_CACHEFLUSH 0xbc /* init flushing cache */
#define AMR_QINIT_DONE 0x9c /* init successfully done */
/*
* I/O primitives
*/
#define AMR_QPUT_IDB(sc, val) bus_space_write_4(sc->amr_btag, sc->amr_bhandle, AMR_QIDB, val)
#define AMR_QGET_IDB(sc) bus_space_read_4 (sc->amr_btag, sc->amr_bhandle, AMR_QIDB)
#define AMR_QPUT_ODB(sc, val) bus_space_write_4(sc->amr_btag, sc->amr_bhandle, AMR_QODB, val)
#define AMR_QGET_ODB(sc) bus_space_read_4 (sc->amr_btag, sc->amr_bhandle, AMR_QODB)
#ifdef AMR_BOARD_INIT
#define AMR_QRESET(sc) \
do { \
pci_write_config((sc)->amr_dev, 0x40, pci_read_config((sc)->amr_dev, 0x40, 1) | 0x20, 1); \
pci_write_config((sc)->amr_dev, 0x64, 0x1122, 1); \
} while (0)
#define AMR_QGET_INITSTATUS(sc) pci_read_config((sc)->amr_dev, 0x9c, 1)
#define AMR_QGET_INITCHAN(sc) pci_read_config((sc)->amr_dev, 0x9f, 1)
#define AMR_QGET_INITTARG(sc) pci_read_config((sc)->amr_dev, 0x9e, 1)
#endif
/********************************************************************************
********************************************************************************
"Standard" old-style ASIC bridge interface
********************************************************************************
********************************************************************************/
/*
* I/O registers
*/
#define AMR_SCMD 0x10 /* command/ack register (write) */
#define AMR_SMBOX_BUSY 0x10 /* mailbox status (read) */
#define AMR_STOGGLE 0x11 /* interrupt enable bit here */
#define AMR_SMBOX_0 0x14 /* mailbox physical address low byte */
#define AMR_SMBOX_1 0x15
#define AMR_SMBOX_2 0x16
#define AMR_SMBOX_3 0x17 /* high byte */
#define AMR_SMBOX_ENABLE 0x18 /* atomic mailbox address enable */
#define AMR_SINTR 0x1a /* interrupt status */
/*
* I/O magic numbers
*/
#define AMR_SCMD_POST 0x10 /* -> SCMD to initiate action on mailbox */
#define AMR_SCMD_ACKINTR 0x08 /* -> SCMD to ack mailbox retrieved */
#define AMR_STOGL_IENABLE 0xc0 /* in STOGGLE */
#define AMR_SINTR_VALID 0x40 /* in SINTR */
#define AMR_SMBOX_BUSYFLAG 0x10 /* in SMBOX_BUSY */
#define AMR_SMBOX_ADDR 0x00 /* -> SMBOX_ENABLE */
/*
* Initialisation status
*/
#define AMR_SINIT_ABEND 0xee /* init abnormal terminated */
#define AMR_SINIT_NOMEM 0xca /* insufficient memory */
#define AMR_SINIT_CACHEFLUSH 0xbb /* firmware flushing cache */
#define AMR_SINIT_INPROG 0x11 /* init in progress */
#define AMR_SINIT_SPINUP 0x22 /* firmware spinning drives */
#define AMR_SINIT_DONE 0x99 /* init successfully done */
/*
* I/O primitives
*/
#define AMR_SPUT_ISTAT(sc, val) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_SINTR, val)
#define AMR_SGET_ISTAT(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SINTR)
#define AMR_SACK_INTERRUPT(sc) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_SCMD, AMR_SCMD_ACKINTR)
#define AMR_SPOST_COMMAND(sc) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_SCMD, AMR_SCMD_POST)
#define AMR_SGET_MBSTAT(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_BUSY)
#define AMR_SENABLE_INTR(sc) \
bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_STOGGLE, \
bus_space_read_1(sc->amr_btag, sc->amr_bhandle, AMR_STOGGLE) | AMR_STOGL_IENABLE)
#define AMR_SDISABLE_INTR(sc) \
bus_space_write_1(sc->amr_btag, sc->amr_bhandle, AMR_STOGGLE, \
bus_space_read_1(sc->amr_btag, sc->amr_bhandle, AMR_STOGGLE) & ~AMR_STOGL_IENABLE)
#define AMR_SBYTE_SET(sc, reg, val) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, reg, val)
#ifdef AMR_BOARD_INIT
#define AMR_SRESET(sc) bus_space_write_1(sc->amr_btag, sc->amr_bhandle, 0, 0x80)
#define AMR_SGET_INITSTATUS(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_ENABLE)
#define AMR_SGET_FAILDRIVE(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_ENABLE + 1)
#define AMR_SGET_INITCHAN(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_ENABLE + 2)
#define AMR_SGET_INITTARG(sc) bus_space_read_1 (sc->amr_btag, sc->amr_bhandle, AMR_SMBOX_ENABLE + 3)
#endif
#endif _KERNEL
Reference in New Issue View Git Blame Copy Permalink