d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2903a30d77
freebsd-skq/sys/dev/isp/isp.c
Matt Jacob cf74f2682e Slightly cleaner fabric support (whiter whites! redder reds!).. No, 
seriously- only attempt to logout a previously logged in fabric device.

Fix a longstanding bug for aborting overtime commands- handle halves
have always been reversed.

Clean up some error messages to indicate channel number.

Approved:jkh
2000-02-29 05:52:14 +00:00

4725 lines
126 KiB
C
Raw Blame History

/* $FreeBSD$ */
/*
* Machine and OS Independent (well, as best as possible)
* code for the Qlogic ISP SCSI adapters.
*
* Copyright (c) 1997, 1998, 1999 by Matthew Jacob
* NASA/Ames Research Center
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Inspiration and ideas about this driver are from Erik Moe's Linux driver
* (qlogicisp.c) and Dave Miller's SBus version of same (qlogicisp.c). Some
* ideas dredged from the Solaris driver.
*/
/*
* Include header file appropriate for platform we're building on.
*/
#ifdef __NetBSD__
#include <dev/ic/isp_netbsd.h>
#endif
#ifdef __FreeBSD__
#include <dev/isp/isp_freebsd.h>
#endif
#ifdef __OpenBSD__
#include <dev/ic/isp_openbsd.h>
#endif
#ifdef __linux__
#include "isp_linux.h"
#endif
/*
* General defines
*/
#define MBOX_DELAY_COUNT 1000000 / 100
/*
* Local static data
*/
/*
* Local function prototypes.
*/
static int isp_parse_async __P((struct ispsoftc *, int));
static int isp_handle_other_response
__P((struct ispsoftc *, ispstatusreq_t *, u_int16_t *));
static void isp_parse_status
__P((struct ispsoftc *, ispstatusreq_t *, ISP_SCSI_XFER_T *));
static void isp_fastpost_complete __P((struct ispsoftc *, u_int32_t));
static void isp_scsi_init __P((struct ispsoftc *));
static void isp_scsi_channel_init __P((struct ispsoftc *, int));
static void isp_fibre_init __P((struct ispsoftc *));
static void isp_mark_getpdb_all __P((struct ispsoftc *));
static int isp_getpdb __P((struct ispsoftc *, int, isp_pdb_t *));
static u_int64_t isp_get_portname __P((struct ispsoftc *, int, int));
static int isp_fclink_test __P((struct ispsoftc *, int));
static int isp_same_lportdb __P((struct lportdb *, struct lportdb *));
static int isp_pdb_sync __P((struct ispsoftc *, int));
#ifdef ISP2100_FABRIC
static int isp_scan_fabric __P((struct ispsoftc *));
#endif
static void isp_fw_state __P((struct ispsoftc *));
static void isp_dumpregs __P((struct ispsoftc *, const char *));
static void isp_mboxcmd __P((struct ispsoftc *, mbreg_t *));
static void isp_update __P((struct ispsoftc *));
static void isp_update_bus __P((struct ispsoftc *, int));
static void isp_setdfltparm __P((struct ispsoftc *, int));
static int isp_read_nvram __P((struct ispsoftc *));
static void isp_rdnvram_word __P((struct ispsoftc *, int, u_int16_t *));
static void isp_parse_nvram_1020 __P((struct ispsoftc *, u_int8_t *));
static void isp_parse_nvram_1080 __P((struct ispsoftc *, int, u_int8_t *));
static void isp_parse_nvram_12160 __P((struct ispsoftc *, int, u_int8_t *));
static void isp_parse_nvram_2100 __P((struct ispsoftc *, u_int8_t *));
/*
* Reset Hardware.
*
* Hit the chip over the head, download new f/w if available and set it running.
*
* Locking done elsewhere.
*/
void
isp_reset(isp)
struct ispsoftc *isp;
{
mbreg_t mbs;
int loops, i, dodnld = 1;
char *revname;
isp->isp_state = ISP_NILSTATE;
/*
* Basic types (SCSI, FibreChannel and PCI or SBus)
* have been set in the MD code. We figure out more
* here.
*/
isp->isp_dblev = DFLT_DBLEVEL;
/*
* After we've fired this chip up, zero out the conf1 register
* for SCSI adapters and other settings for the 2100.
*/
/*
* Get the current running firmware revision out of the
* chip before we hit it over the head (if this is our
* first time through). Note that we store this as the
* 'ROM' firmware revision- which it may not be. In any
* case, we don't really use this yet, but we may in
* the future.
*/
if (isp->isp_touched == 0) {
/*
* Just in case it was paused...
*/
ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE);
mbs.param[0] = MBOX_ABOUT_FIRMWARE;
isp_mboxcmd(isp, &mbs);
/*
* If this fails, it probably means we're running
* an old prom, if anything at all...
*/
if (mbs.param[0] == MBOX_COMMAND_COMPLETE) {
isp->isp_romfw_rev[0] = mbs.param[1];
isp->isp_romfw_rev[1] = mbs.param[2];
isp->isp_romfw_rev[2] = mbs.param[3];
}
isp->isp_touched = 1;
}
DISABLE_INTS(isp);
/*
* Put the board into PAUSE mode (so we can read the SXP registers).
*/
ISP_WRITE(isp, HCCR, HCCR_CMD_PAUSE);
if (IS_FC(isp)) {
revname = "2X00";
switch (isp->isp_type) {
case ISP_HA_FC_2100:
revname[1] = '1';
break;
case ISP_HA_FC_2200:
revname[1] = '2';
break;
default:
break;
}
} else if (IS_1240(isp)) {
sdparam *sdp = isp->isp_param;
revname = "1240";
isp->isp_clock = 60;
sdp->isp_ultramode = 1;
sdp++;
sdp->isp_ultramode = 1;
/*
* XXX: Should probably do some bus sensing.
*/
} else if (IS_ULTRA2(isp)) {
static char *m = "%s: bus %d is in %s Mode\n";
u_int16_t l;
sdparam *sdp = isp->isp_param;
isp->isp_clock = 100;
if (IS_1280(isp))
revname = "1280";
else if (IS_1080(isp))
revname = "1080";
else if (IS_12160(isp))
revname = "12160";
else
revname = "<UNKLVD>";
l = ISP_READ(isp, SXP_PINS_DIFF) & ISP1080_MODE_MASK;
switch (l) {
case ISP1080_LVD_MODE:
sdp->isp_lvdmode = 1;
CFGPRINTF(m, isp->isp_name, 0, "LVD");
break;
case ISP1080_HVD_MODE:
sdp->isp_diffmode = 1;
CFGPRINTF(m, isp->isp_name, 0, "Differential");
break;
case ISP1080_SE_MODE:
sdp->isp_ultramode = 1;
CFGPRINTF(m, isp->isp_name, 0, "Single-Ended");
break;
default:
CFGPRINTF("%s: unknown mode on bus %d (0x%x)\n",
isp->isp_name, 0, l);
break;
}
if (IS_DUALBUS(isp)) {
sdp++;
l = ISP_READ(isp, SXP_PINS_DIFF|SXP_BANK1_SELECT);
l &= ISP1080_MODE_MASK;
switch(l) {
case ISP1080_LVD_MODE:
sdp->isp_lvdmode = 1;
CFGPRINTF(m, isp->isp_name, 1, "LVD");
break;
case ISP1080_HVD_MODE:
sdp->isp_diffmode = 1;
CFGPRINTF(m, isp->isp_name, 1, "Differential");
break;
case ISP1080_SE_MODE:
sdp->isp_ultramode = 1;
CFGPRINTF(m, isp->isp_name, 1, "Single-Ended");
break;
default:
CFGPRINTF("%s: unknown mode on bus %d (0x%x)\n",
isp->isp_name, 1, l);
break;
}
}
} else {
sdparam *sdp = isp->isp_param;
i = ISP_READ(isp, BIU_CONF0) & BIU_CONF0_HW_MASK;
switch (i) {
default:
PRINTF("%s: unknown chip rev. 0x%x- assuming a 1020\n",
isp->isp_name, i);
/* FALLTHROUGH */
case 1:
revname = "1020";
isp->isp_type = ISP_HA_SCSI_1020;
isp->isp_clock = 40;
break;
case 2:
/*
* Some 1020A chips are Ultra Capable, but don't
* run the clock rate up for that unless told to
* do so by the Ultra Capable bits being set.
*/
revname = "1020A";
isp->isp_type = ISP_HA_SCSI_1020A;
isp->isp_clock = 40;
break;
case 3:
revname = "1040";
isp->isp_type = ISP_HA_SCSI_1040;
isp->isp_clock = 60;
break;
case 4:
revname = "1040A";
isp->isp_type = ISP_HA_SCSI_1040A;
isp->isp_clock = 60;
break;
case 5:
revname = "1040B";
isp->isp_type = ISP_HA_SCSI_1040B;
isp->isp_clock = 60;
break;
case 6:
revname = "1040C";
isp->isp_type = ISP_HA_SCSI_1040C;
isp->isp_clock = 60;
break;
}
/*
* Now, while we're at it, gather info about ultra
* and/or differential mode.
*/
if (ISP_READ(isp, SXP_PINS_DIFF) & SXP_PINS_DIFF_MODE) {
CFGPRINTF("%s: Differential Mode\n", isp->isp_name);
sdp->isp_diffmode = 1;
} else {
sdp->isp_diffmode = 0;
}
i = ISP_READ(isp, RISC_PSR);
if (isp->isp_bustype == ISP_BT_SBUS) {
i &= RISC_PSR_SBUS_ULTRA;
} else {
i &= RISC_PSR_PCI_ULTRA;
}
if (i != 0) {
CFGPRINTF("%s: Ultra Mode Capable\n", isp->isp_name);
sdp->isp_ultramode = 1;
/*
* If we're in Ultra Mode, we have to be 60Mhz clock-
* even for the SBus version.
*/
isp->isp_clock = 60;
} else {
sdp->isp_ultramode = 0;
/*
* Clock is known. Gronk.
*/
}
/*
* Machine dependent clock (if set) overrides
* our generic determinations.
*/
if (isp->isp_mdvec->dv_clock) {
if (isp->isp_mdvec->dv_clock < isp->isp_clock) {
isp->isp_clock = isp->isp_mdvec->dv_clock;
}
}
}
/*
* Do MD specific pre initialization
*/
ISP_RESET0(isp);
again:
/*
* Hit the chip over the head with hammer,
* and give the ISP a chance to recover.
*/
if (IS_SCSI(isp)) {
ISP_WRITE(isp, BIU_ICR, BIU_ICR_SOFT_RESET);
/*
* A slight delay...
*/
SYS_DELAY(100);
#if 0
PRINTF("%s: mbox0-5: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
isp->isp_name, ISP_READ(isp, OUTMAILBOX0),
ISP_READ(isp, OUTMAILBOX1), ISP_READ(isp, OUTMAILBOX2),
ISP_READ(isp, OUTMAILBOX3), ISP_READ(isp, OUTMAILBOX4),
ISP_READ(isp, OUTMAILBOX5));
#endif
/*
* Clear data && control DMA engines.
*/
ISP_WRITE(isp, CDMA_CONTROL,
DMA_CNTRL_CLEAR_CHAN | DMA_CNTRL_RESET_INT);
ISP_WRITE(isp, DDMA_CONTROL,
DMA_CNTRL_CLEAR_CHAN | DMA_CNTRL_RESET_INT);
} else {
ISP_WRITE(isp, BIU2100_CSR, BIU2100_SOFT_RESET);
/*
* A slight delay...
*/
SYS_DELAY(100);
/*
* Clear data && control DMA engines.
*/
ISP_WRITE(isp, CDMA2100_CONTROL,
DMA_CNTRL2100_CLEAR_CHAN | DMA_CNTRL2100_RESET_INT);
ISP_WRITE(isp, TDMA2100_CONTROL,
DMA_CNTRL2100_CLEAR_CHAN | DMA_CNTRL2100_RESET_INT);
ISP_WRITE(isp, RDMA2100_CONTROL,
DMA_CNTRL2100_CLEAR_CHAN | DMA_CNTRL2100_RESET_INT);
}
/*
* Wait for ISP to be ready to go...
*/
loops = MBOX_DELAY_COUNT;
for (;;) {
if (IS_SCSI(isp)) {
if (!(ISP_READ(isp, BIU_ICR) & BIU_ICR_SOFT_RESET))
break;
} else {
if (!(ISP_READ(isp, BIU2100_CSR) & BIU2100_SOFT_RESET))
break;
}
SYS_DELAY(100);
if (--loops < 0) {
isp_dumpregs(isp, "chip reset timed out");
return;
}
}
/*
* After we've fired this chip up, zero out the conf1 register
* for SCSI adapters and other settings for the 2100.
*/
if (IS_SCSI(isp)) {
ISP_WRITE(isp, BIU_CONF1, 0);
} else {
ISP_WRITE(isp, BIU2100_CSR, 0);
}
/*
* Reset RISC Processor
*/
ISP_WRITE(isp, HCCR, HCCR_CMD_RESET);
SYS_DELAY(100);
/*
* Establish some initial burst rate stuff.
* (only for the 1XX0 boards). This really should
* be done later after fetching from NVRAM.
*/
if (IS_SCSI(isp)) {
u_int16_t tmp = isp->isp_mdvec->dv_conf1;
/*
* Busted FIFO. Turn off all but burst enables.
*/
if (isp->isp_type == ISP_HA_SCSI_1040A) {
tmp &= BIU_BURST_ENABLE;
}
ISP_SETBITS(isp, BIU_CONF1, tmp);
if (tmp & BIU_BURST_ENABLE) {
ISP_SETBITS(isp, CDMA_CONF, DMA_ENABLE_BURST);
ISP_SETBITS(isp, DDMA_CONF, DMA_ENABLE_BURST);
}
#ifdef PTI_CARDS
if (((sdparam *) isp->isp_param)->isp_ultramode) {
while (ISP_READ(isp, RISC_MTR) != 0x1313) {
ISP_WRITE(isp, RISC_MTR, 0x1313);
ISP_WRITE(isp, HCCR, HCCR_CMD_STEP);
}
} else {
ISP_WRITE(isp, RISC_MTR, 0x1212);
}
/*
* PTI specific register
*/
ISP_WRITE(isp, RISC_EMB, DUAL_BANK)
#else
ISP_WRITE(isp, RISC_MTR, 0x1212);
#endif
} else {
ISP_WRITE(isp, RISC_MTR2100, 0x1212);
}
ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE); /* release paused processor */
/*
* Do MD specific post initialization
*/
ISP_RESET1(isp);
/*
* Wait for everything to finish firing up...
*/
loops = MBOX_DELAY_COUNT;
while (ISP_READ(isp, OUTMAILBOX0) == MBOX_BUSY) {
SYS_DELAY(100);
if (--loops < 0) {
PRINTF("%s: MBOX_BUSY never cleared on reset\n",
isp->isp_name);
return;
}
}
/*
* Up until this point we've done everything by just reading or
* setting registers. From this point on we rely on at least *some*
* kind of firmware running in the card.
*/
/*
* Do some sanity checking.
*/
mbs.param[0] = MBOX_NO_OP;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
isp_dumpregs(isp, "NOP test failed");
return;
}
if (IS_SCSI(isp)) {
mbs.param[0] = MBOX_MAILBOX_REG_TEST;
mbs.param[1] = 0xdead;
mbs.param[2] = 0xbeef;
mbs.param[3] = 0xffff;
mbs.param[4] = 0x1111;
mbs.param[5] = 0xa5a5;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
isp_dumpregs(isp,
"Mailbox Register test didn't complete");
return;
}
if (mbs.param[1] != 0xdead || mbs.param[2] != 0xbeef ||
mbs.param[3] != 0xffff || mbs.param[4] != 0x1111 ||
mbs.param[5] != 0xa5a5) {
isp_dumpregs(isp, "Register Test Failed");
return;
}
}
/*
* Download new Firmware, unless requested not to do so.
* This is made slightly trickier in some cases where the
* firmware of the ROM revision is newer than the revision
* compiled into the driver. So, where we used to compare
* versions of our f/w and the ROM f/w, now we just see
* whether we have f/w at all and whether a config flag
* has disabled our download.
*/
if ((isp->isp_mdvec->dv_ispfw == NULL) ||
(isp->isp_confopts & ISP_CFG_NORELOAD)) {
dodnld = 0;
}
if (dodnld) {
u_int16_t fwlen = isp->isp_mdvec->dv_fwlen;
if (fwlen == 0)
fwlen = isp->isp_mdvec->dv_ispfw[3]; /* usually here */
for (i = 0; i < fwlen; i++) {
mbs.param[0] = MBOX_WRITE_RAM_WORD;
mbs.param[1] = isp->isp_mdvec->dv_codeorg + i;
mbs.param[2] = isp->isp_mdvec->dv_ispfw[i];
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: F/W download failed at word %d\n",
isp->isp_name, i);
dodnld = 0;
goto again;
}
}
/*
* Verify that it downloaded correctly.
*/
mbs.param[0] = MBOX_VERIFY_CHECKSUM;
mbs.param[1] = isp->isp_mdvec->dv_codeorg;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
isp_dumpregs(isp, "ram checksum failure");
return;
}
} else {
IDPRINTF(3, ("%s: skipping f/w download\n", isp->isp_name));
}
/*
* Now start it rolling.
*
* If we didn't actually download f/w,
* we still need to (re)start it.
*/
mbs.param[0] = MBOX_EXEC_FIRMWARE;
if (isp->isp_mdvec->dv_codeorg)
mbs.param[1] = isp->isp_mdvec->dv_codeorg;
else
mbs.param[1] = 0x1000;
isp_mboxcmd(isp, &mbs);
if (IS_SCSI(isp)) {
/*
* Set CLOCK RATE, but only if asked to.
*/
if (isp->isp_clock) {
mbs.param[0] = MBOX_SET_CLOCK_RATE;
mbs.param[1] = isp->isp_clock;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("failed to set clockrate (0x%x)\n",
mbs.param[0]);
/* but continue */
}
}
}
mbs.param[0] = MBOX_ABOUT_FIRMWARE;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("could not get f/w started (0x%x)\n", mbs.param[0]);
return;
}
CFGPRINTF("%s: Board Revision %s, %s F/W Revision %d.%d.%d\n",
isp->isp_name, revname, dodnld? "loaded" : "resident",
mbs.param[1], mbs.param[2], mbs.param[3]);
if (IS_FC(isp)) {
if (ISP_READ(isp, BIU2100_CSR) & BIU2100_PCI64) {
CFGPRINTF("%s: in 64-Bit PCI slot\n", isp->isp_name);
}
}
isp->isp_fwrev[0] = mbs.param[1];
isp->isp_fwrev[1] = mbs.param[2];
isp->isp_fwrev[2] = mbs.param[3];
if (isp->isp_romfw_rev[0] || isp->isp_romfw_rev[1] ||
isp->isp_romfw_rev[2]) {
CFGPRINTF("%s: Last F/W revision was %d.%d.%d\n", isp->isp_name,
isp->isp_romfw_rev[0], isp->isp_romfw_rev[1],
isp->isp_romfw_rev[2]);
}
mbs.param[0] = MBOX_GET_FIRMWARE_STATUS;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: could not GET FIRMWARE STATUS\n", isp->isp_name);
return;
}
isp->isp_maxcmds = mbs.param[2];
CFGPRINTF("%s: %d max I/O commands supported\n",
isp->isp_name, mbs.param[2]);
isp_fw_state(isp);
/*
* Set up DMA for the request and result mailboxes.
*/
if (ISP_MBOXDMASETUP(isp) != 0) {
PRINTF("%s: can't setup dma mailboxes\n", isp->isp_name);
return;
}
isp->isp_state = ISP_RESETSTATE;
}
/*
* Initialize Parameters of Hardware to a known state.
*
* Locks are held before coming here.
*/
void
isp_init(isp)
struct ispsoftc *isp;
{
/*
* Must do this first to get defaults established.
*/
isp_setdfltparm(isp, 0);
if (IS_DUALBUS(isp)) {
isp_setdfltparm(isp, 1);
}
if (IS_FC(isp)) {
isp_fibre_init(isp);
} else {
isp_scsi_init(isp);
}
}
static void
isp_scsi_init(isp)
struct ispsoftc *isp;
{
sdparam *sdp_chan0, *sdp_chan1;
mbreg_t mbs;
sdp_chan0 = isp->isp_param;
sdp_chan1 = sdp_chan0;
if (IS_DUALBUS(isp)) {
sdp_chan1++;
}
/* First do overall per-card settings. */
/*
* If we have fast memory timing enabled, turn it on.
*/
if (isp->isp_fast_mttr) {
ISP_WRITE(isp, RISC_MTR, 0x1313);
}
/*
* Set Retry Delay and Count.
* You set both channels at the same time.
*/
mbs.param[0] = MBOX_SET_RETRY_COUNT;
mbs.param[1] = sdp_chan0->isp_retry_count;
mbs.param[2] = sdp_chan0->isp_retry_delay;
mbs.param[6] = sdp_chan1->isp_retry_count;
mbs.param[7] = sdp_chan1->isp_retry_delay;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: failed to set retry count and retry delay\n",
isp->isp_name);
return;
}
/*
* Set ASYNC DATA SETUP time. This is very important.
*/
mbs.param[0] = MBOX_SET_ASYNC_DATA_SETUP_TIME;
mbs.param[1] = sdp_chan0->isp_async_data_setup;
mbs.param[2] = sdp_chan1->isp_async_data_setup;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: failed to set asynchronous data setup time\n",
isp->isp_name);
return;
}
/*
* Set ACTIVE Negation State.
*/
mbs.param[0] = MBOX_SET_ACT_NEG_STATE;
mbs.param[1] =
(sdp_chan0->isp_req_ack_active_neg << 4) |
(sdp_chan0->isp_data_line_active_neg << 5);
mbs.param[2] =
(sdp_chan1->isp_req_ack_active_neg << 4) |
(sdp_chan1->isp_data_line_active_neg << 5);
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: failed to set active negation state "
"(%d,%d),(%d,%d)\n", isp->isp_name,
sdp_chan0->isp_req_ack_active_neg,
sdp_chan0->isp_data_line_active_neg,
sdp_chan1->isp_req_ack_active_neg,
sdp_chan1->isp_data_line_active_neg);
/*
* But don't return.
*/
}
/*
* Set the Tag Aging limit
*/
mbs.param[0] = MBOX_SET_TAG_AGE_LIMIT;
mbs.param[1] = sdp_chan0->isp_tag_aging;
mbs.param[2] = sdp_chan1->isp_tag_aging;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: failed to set tag age limit (%d,%d)\n",
isp->isp_name, sdp_chan0->isp_tag_aging,
sdp_chan1->isp_tag_aging);
return;
}
/*
* Set selection timeout.
*/
mbs.param[0] = MBOX_SET_SELECT_TIMEOUT;
mbs.param[1] = sdp_chan0->isp_selection_timeout;
mbs.param[2] = sdp_chan1->isp_selection_timeout;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: failed to set selection timeout\n", isp->isp_name);
return;
}
/* now do per-channel settings */
isp_scsi_channel_init(isp, 0);
if (IS_DUALBUS(isp))
isp_scsi_channel_init(isp, 1);
/*
* Now enable request/response queues
*/
mbs.param[0] = MBOX_INIT_RES_QUEUE;
mbs.param[1] = RESULT_QUEUE_LEN;
mbs.param[2] = DMA_MSW(isp->isp_result_dma);
mbs.param[3] = DMA_LSW(isp->isp_result_dma);
mbs.param[4] = 0;
mbs.param[5] = 0;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: set of response queue failed\n", isp->isp_name);
return;
}
isp->isp_residx = 0;
mbs.param[0] = MBOX_INIT_REQ_QUEUE;
mbs.param[1] = RQUEST_QUEUE_LEN;
mbs.param[2] = DMA_MSW(isp->isp_rquest_dma);
mbs.param[3] = DMA_LSW(isp->isp_rquest_dma);
mbs.param[4] = 0;
mbs.param[5] = 0;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: set of request queue failed\n", isp->isp_name);
return;
}
isp->isp_reqidx = isp->isp_reqodx = 0;
/*
* Turn on Fast Posting, LVD transitions
*
* Ultra2 F/W always has had fast posting (and LVD transitions)
*
* Ultra and older (i.e., SBus) cards may not. It's just safer
* to assume not for them.
*/
mbs.param[0] = MBOX_SET_FW_FEATURES;
mbs.param[1] = 0;
if (IS_ULTRA2(isp))
mbs.param[1] |= FW_FEATURE_LVD_NOTIFY;
if (IS_ULTRA2(isp) || IS_1240(isp))
mbs.param[1] |= FW_FEATURE_FAST_POST;
if (mbs.param[1] != 0) {
u_int16_t sfeat = mbs.param[1];
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: cannot enable FW features (0x%x)\n",
isp->isp_name, sfeat);
} else {
CFGPRINTF("%s: enabled FW features (0x%x)\n",
isp->isp_name, sfeat);
}
}
/*
* Let the outer layers decide whether to issue a SCSI bus reset.
*/
isp->isp_state = ISP_INITSTATE;
}
static void
isp_scsi_channel_init(isp, channel)
struct ispsoftc *isp;
int channel;
{
sdparam *sdp;
mbreg_t mbs;
int tgt;
sdp = isp->isp_param;
sdp += channel;
/*
* Set (possibly new) Initiator ID.
*/
mbs.param[0] = MBOX_SET_INIT_SCSI_ID;
mbs.param[1] = (channel << 7) | sdp->isp_initiator_id;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: cannot set initiator id on bus %d to %d\n",
isp->isp_name, channel, sdp->isp_initiator_id);
return;
}
/*
* Set current per-target parameters to a safe minimum.
*/
for (tgt = 0; tgt < MAX_TARGETS; tgt++) {
int maxlun, lun;
u_int16_t sdf;
if (sdp->isp_devparam[tgt].dev_enable == 0) {
IDPRINTF(1, ("%s: skipping target %d bus %d settings\n",
isp->isp_name, tgt, channel));
continue;
}
/*
* If we're in LVD mode, then we pretty much should
* only disable tagged queuing.
*/
if (IS_ULTRA2(isp) && sdp->isp_lvdmode) {
sdf = DPARM_DEFAULT & ~DPARM_TQING;
} else {
int rvf = ISP_FW_REVX(isp->isp_fwrev);
sdf = DPARM_SAFE_DFLT;
/*
* It is not quite clear when this changed over so that
* we could force narrow and async, so assume >= 7.55
* for i/t F/W and = 4.55 for initiator f/w.
*/
if ((ISP_FW_REV(4, 55, 0) <= rvf &&
(ISP_FW_REV(5, 0, 0) > rvf)) ||
(ISP_FW_REV(7, 55, 0) <= rvf)) {
sdf |= DPARM_NARROW | DPARM_ASYNC;
}
}
mbs.param[0] = MBOX_SET_TARGET_PARAMS;
mbs.param[1] = (tgt << 8) | (channel << 15);
mbs.param[2] = sdf;
mbs.param[3] =
(sdp->isp_devparam[tgt].sync_offset << 8) |
(sdp->isp_devparam[tgt].sync_period);
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
sdf = DPARM_SAFE_DFLT;
mbs.param[0] = MBOX_SET_TARGET_PARAMS;
mbs.param[1] = (tgt << 8) | (channel << 15);
mbs.param[2] = sdf;
mbs.param[3] =
(sdp->isp_devparam[tgt].sync_offset << 8) |
(sdp->isp_devparam[tgt].sync_period);
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: failed even to set defaults for "
"target %d\n", isp->isp_name, tgt);
continue;
}
}
#if 0
/*
* We don't update dev_flags with what we've set
* because that's not the ultimate goal setting.
* If we succeed with the command, we *do* update
* cur_dflags by getting target parameters.
*/
mbs.param[0] = MBOX_GET_TARGET_PARAMS;
mbs.param[1] = (tgt << 8) | (channel << 15);
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
/*
* Urrr.... We'll set cur_dflags to DPARM_SAFE_DFLT so
* we don't try and do tags if tags aren't enabled.
*/
sdp->isp_devparam[tgt].cur_dflags = DPARM_SAFE_DFLT;
} else {
sdp->isp_devparam[tgt].cur_dflags = mbs.param[2];
sdp->isp_devparam[tgt].cur_offset = mbs.param[3] >> 8;
sdp->isp_devparam[tgt].cur_period = mbs.param[3] & 0xff;
}
IDPRINTF(3, ("%s: set flags 0x%x got 0x%x back for target %d\n",
isp->isp_name, sdf, mbs.param[2], tgt));
#else
/*
* We don't update any information because we need to run
* at least one command per target to cause a new state
* to be latched.
*/
#endif
/*
* Ensure that we don't believe tagged queuing is enabled yet.
* It turns out that sometimes the ISP just ignores our
* attempts to set parameters for devices that it hasn't
* seen yet.
*/
sdp->isp_devparam[tgt].cur_dflags &= ~DPARM_TQING;
if ((ISP_FW_REV(4, 55, 0) <= ISP_FW_REVX(isp->isp_fwrev) &&
(ISP_FW_REV(5, 0, 0) > ISP_FW_REVX(isp->isp_fwrev))) ||
(ISP_FW_REVX(isp->isp_fwrev) >= ISP_FW_REV(7, 55, 0)))
maxlun = 32;
else
maxlun = 8;
for (lun = 0; lun < maxlun; lun++) {
mbs.param[0] = MBOX_SET_DEV_QUEUE_PARAMS;
mbs.param[1] = (channel << 15) | (tgt << 8) | lun;
mbs.param[2] = sdp->isp_max_queue_depth;
mbs.param[3] = sdp->isp_devparam[tgt].exc_throttle;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: failed to set device queue "
"parameters for target %d, lun %d\n",
isp->isp_name, tgt, lun);
break;
}
}
}
}
/*
* Fibre Channel specific initialization.
*
* Locks are held before coming here.
*/
static void
isp_fibre_init(isp)
struct ispsoftc *isp;
{
fcparam *fcp;
isp_icb_t *icbp;
mbreg_t mbs;
int loopid;
fcp = isp->isp_param;
/*
* For systems that don't have BIOS methods for which
* we can easily change the NVRAM based loopid, we'll
* override that here. Note that when we initialize
* the firmware we may get back a different loopid than
* we asked for anyway. XXX This is probably not the
* best way to figure this out XXX
*/
#ifndef __i386__
loopid = DEFAULT_LOOPID(isp);
#else
loopid = fcp->isp_loopid;
#endif
icbp = (isp_icb_t *) fcp->isp_scratch;
MEMZERO(icbp, sizeof (*icbp));
icbp->icb_version = ICB_VERSION1;
#ifdef ISP_TARGET_MODE
fcp->isp_fwoptions = ICBOPT_TGT_ENABLE;
#else
fcp->isp_fwoptions = 0;
#endif
fcp->isp_fwoptions |= ICBOPT_FAIRNESS;
/*
* If this is a 2100 < revision 5, we have to turn off FAIRNESS.
*/
if ((isp->isp_type == ISP_HA_FC_2100) && isp->isp_revision < 5) {
fcp->isp_fwoptions &= ~ICBOPT_FAIRNESS;
}
fcp->isp_fwoptions |= ICBOPT_PDBCHANGE_AE;
fcp->isp_fwoptions |= ICBOPT_HARD_ADDRESS;
/*
* We have to use FULL LOGIN even though it resets the loop too much
* because otherwise port database entries don't get updated after
* a LIP- this is a known f/w bug.
*/
if (ISP_FW_REVX(isp->isp_fwrev) < ISP_FW_REV(1, 17, 0)) {
fcp->isp_fwoptions |= ICBOPT_FULL_LOGIN;
}
#ifndef ISP_NO_FASTPOST_FC
fcp->isp_fwoptions |= ICBOPT_FAST_POST;
#endif
if (isp->isp_confopts & ISP_CFG_FULL_DUPLEX)
fcp->isp_fwoptions |= ICBOPT_FULL_DUPLEX;
/*
* We don't set ICBOPT_PORTNAME because we want our
* Node Name && Port Names to be distinct.
*/
icbp->icb_fwoptions = fcp->isp_fwoptions;
icbp->icb_maxfrmlen = fcp->isp_maxfrmlen;
if (icbp->icb_maxfrmlen < ICB_MIN_FRMLEN ||
icbp->icb_maxfrmlen > ICB_MAX_FRMLEN) {
PRINTF("%s: bad frame length (%d) from NVRAM- using %d\n",
isp->isp_name, fcp->isp_maxfrmlen, ICB_DFLT_FRMLEN);
icbp->icb_maxfrmlen = ICB_DFLT_FRMLEN;
}
icbp->icb_maxalloc = fcp->isp_maxalloc;
if (icbp->icb_maxalloc < 1) {
PRINTF("%s: bad maximum allocation (%d)- using 16\n",
isp->isp_name, fcp->isp_maxalloc);
icbp->icb_maxalloc = 16;
}
icbp->icb_execthrottle = fcp->isp_execthrottle;
if (icbp->icb_execthrottle < 1) {
PRINTF("%s: bad execution throttle of %d- using 16\n",
isp->isp_name, fcp->isp_execthrottle);
icbp->icb_execthrottle = ICB_DFLT_THROTTLE;
}
icbp->icb_retry_delay = fcp->isp_retry_delay;
icbp->icb_retry_count = fcp->isp_retry_count;
icbp->icb_hardaddr = loopid;
#ifdef PRET_A_PORTE
if (IS_2200(isp)) {
icbp->icb_fwoptions |= ICBOPT_EXTENDED;
/*
* Prefer or force Point-To-Point instead Loop?
*/
if (isp->isp_confopts & ISP_CFG_NPORT)
icbp->icb_xfwoptions = ICBXOPT_PTP_2_LOOP;
else
icbp->icb_xfwoptions = ICBXOPT_LOOP_2_PTP;
}
#endif
icbp->icb_logintime = 60; /* 60 second login timeout */
if (fcp->isp_nodewwn) {
u_int64_t pn;
MAKE_NODE_NAME_FROM_WWN(icbp->icb_nodename, fcp->isp_nodewwn);
if (fcp->isp_portwwn) {
pn = fcp->isp_portwwn;
} else {
pn = fcp->isp_nodewwn |
(((u_int64_t)(isp->isp_unit+1)) << 56);
}
/*
* If the top nibble is 2, we can construct a port name
* from the node name by setting a nonzero instance in
* bits 56..59. Otherwise, we need to make it identical
* to Node name...
*/
if ((fcp->isp_nodewwn >> 60) == 2) {
MAKE_NODE_NAME_FROM_WWN(icbp->icb_portname, pn);
} else {
MAKE_NODE_NAME_FROM_WWN(icbp->icb_portname,
fcp->isp_nodewwn);
}
} else {
fcp->isp_fwoptions &= ~(ICBOPT_USE_PORTNAME|ICBOPT_FULL_LOGIN);
}
icbp->icb_rqstqlen = RQUEST_QUEUE_LEN;
icbp->icb_rsltqlen = RESULT_QUEUE_LEN;
icbp->icb_rqstaddr[RQRSP_ADDR0015] = DMA_LSW(isp->isp_rquest_dma);
icbp->icb_rqstaddr[RQRSP_ADDR1631] = DMA_MSW(isp->isp_rquest_dma);
icbp->icb_respaddr[RQRSP_ADDR0015] = DMA_LSW(isp->isp_result_dma);
icbp->icb_respaddr[RQRSP_ADDR1631] = DMA_MSW(isp->isp_result_dma);
ISP_SWIZZLE_ICB(isp, icbp);
/*
* Do this *before* initializing the firmware.
*/
isp_mark_getpdb_all(isp);
fcp->isp_fwstate = FW_CONFIG_WAIT;
fcp->isp_loopstate = LOOP_NIL;
MemoryBarrier();
for (;;) {
mbs.param[0] = MBOX_INIT_FIRMWARE;
mbs.param[1] = 0;
mbs.param[2] = DMA_MSW(fcp->isp_scdma);
mbs.param[3] = DMA_LSW(fcp->isp_scdma);
mbs.param[4] = 0;
mbs.param[5] = 0;
mbs.param[6] = 0;
mbs.param[7] = 0;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: INIT FIRMWARE failed (code 0x%x)\n",
isp->isp_name, mbs.param[0]);
if (mbs.param[0] & 0x8000) {
SYS_DELAY(1000);
continue;
}
return;
}
break;
}
isp->isp_reqidx = isp->isp_reqodx = 0;
isp->isp_residx = 0;
isp->isp_sendmarker = 1;
/*
* Whatever happens, we're now committed to being here.
*/
isp->isp_state = ISP_INITSTATE;
}
/*
* Fibre Channel Support- get the port database for the id.
*
* Locks are held before coming here. Return 0 if success,
* else failure.
*/
static void
isp_mark_getpdb_all(isp)
struct ispsoftc *isp;
{
fcparam *fcp = (fcparam *) isp->isp_param;
int i;
for (i = 0; i < MAX_FC_TARG; i++) {
fcp->portdb[i].valid = 0;
}
}
static int
isp_getpdb(isp, id, pdbp)
struct ispsoftc *isp;
int id;
isp_pdb_t *pdbp;
{
fcparam *fcp = (fcparam *) isp->isp_param;
mbreg_t mbs;
mbs.param[0] = MBOX_GET_PORT_DB;
mbs.param[1] = id << 8;
mbs.param[2] = DMA_MSW(fcp->isp_scdma);
mbs.param[3] = DMA_LSW(fcp->isp_scdma);
/*
* Unneeded. For the 2100, except for initializing f/w, registers
* 4/5 have to not be written to.
* mbs.param[4] = 0;
* mbs.param[5] = 0;
*
*/
mbs.param[6] = 0;
mbs.param[7] = 0;
isp_mboxcmd(isp, &mbs);
switch (mbs.param[0]) {
case MBOX_COMMAND_COMPLETE:
MemoryBarrier();
ISP_UNSWIZZLE_AND_COPY_PDBP(isp, pdbp, fcp->isp_scratch);
break;
case MBOX_HOST_INTERFACE_ERROR:
PRINTF("%s: DMA error getting port database\n", isp->isp_name);
return (-1);
case MBOX_COMMAND_PARAM_ERROR:
/* Not Logged In */
IDPRINTF(3, ("%s: Param Error on Get Port Database for id %d\n",
isp->isp_name, id));
return (-1);
default:
PRINTF("%s: error 0x%x getting port database for ID %d\n",
isp->isp_name, mbs.param[0], id);
return (-1);
}
return (0);
}
static u_int64_t
isp_get_portname(isp, loopid, nodename)
struct ispsoftc *isp;
int loopid;
int nodename;
{
u_int64_t wwn = 0;
mbreg_t mbs;
mbs.param[0] = MBOX_GET_PORT_NAME;
mbs.param[1] = loopid << 8;
if (nodename)
mbs.param[1] |= 1;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] == MBOX_COMMAND_COMPLETE) {
wwn =
(((u_int64_t)(mbs.param[2] & 0xff)) << 56) |
(((u_int64_t)(mbs.param[2] >> 8)) << 48) |
(((u_int64_t)(mbs.param[3] & 0xff)) << 40) |
(((u_int64_t)(mbs.param[3] >> 8)) << 32) |
(((u_int64_t)(mbs.param[6] & 0xff)) << 24) |
(((u_int64_t)(mbs.param[6] >> 8)) << 16) |
(((u_int64_t)(mbs.param[7] & 0xff)) << 8) |
(((u_int64_t)(mbs.param[7] >> 8)));
}
return (wwn);
}
/*
* Make sure we have good FC link and know our Loop ID.
*/
static int
isp_fclink_test(isp, waitdelay)
struct ispsoftc *isp;
int waitdelay;
{
static char *toponames[] = {
"Private Loop",
"FL Port",
"N-Port to N-Port",
"F Port"
};
mbreg_t mbs;
int count, topo = -1;
u_int8_t lwfs;
fcparam *fcp;
#if defined(ISP2100_FABRIC)
isp_pdb_t pdb;
#endif
fcp = isp->isp_param;
/*
* Wait up to N microseconds for F/W to go to a ready state.
*/
lwfs = FW_CONFIG_WAIT;
for (count = 0; count < waitdelay; count += 100) {
isp_fw_state(isp);
if (lwfs != fcp->isp_fwstate) {
PRINTF("%s: Firmware State %s -> %s\n",
isp->isp_name, isp2100_fw_statename((int)lwfs),
isp2100_fw_statename((int)fcp->isp_fwstate));
lwfs = fcp->isp_fwstate;
}
if (fcp->isp_fwstate == FW_READY) {
break;
}
SYS_DELAY(100); /* wait 100 microseconds */
}
/*
* If we haven't gone to 'ready' state, return.
*/
if (fcp->isp_fwstate != FW_READY) {
return (-1);
}
/*
* Get our Loop ID (if possible). We really need to have it.
*/
mbs.param[0] = MBOX_GET_LOOP_ID;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: GET LOOP ID failed\n", isp->isp_name);
return (-1);
}
fcp->isp_loopid = mbs.param[1];
if (IS_2200(isp)) {
topo = (int) mbs.param[6];
if (topo < 0 || topo > 3)
topo = 0;
} else {
topo = 0;
}
/*
* If we're not on a fabric, the low 8 bits will be our AL_PA.
* If we're on a fabric, the low 8 bits will still be our AL_PA.
*/
fcp->isp_alpa = mbs.param[2];
#if defined(ISP2100_FABRIC)
fcp->isp_onfabric = 0;
if (isp_getpdb(isp, FL_PORT_ID, &pdb) == 0) {
if (IS_2100(isp))
topo = 1;
fcp->isp_portid = mbs.param[2] | (((int)mbs.param[3]) << 16);
fcp->isp_onfabric = 1;
CFGPRINTF("%s: Loop ID %d, AL_PA 0x%x, Port ID 0x%x Loop State "
"0x%x topology '%s'\n", isp->isp_name, fcp->isp_loopid,
fcp->isp_alpa, fcp->isp_portid, fcp->isp_loopstate,
toponames[topo]);
/*
* Make sure we're logged out of all fabric devices.
*/
for (count = FC_SNS_ID+1; count < MAX_FC_TARG; count++) {
struct lportdb *lp = &fcp->portdb[count];
if (lp->valid == 0 || lp->fabdev == 0)
continue;
PRINTF("%s: logging out target %d at Loop ID %d "
"(port id 0x%x)\n", isp->isp_name, count,
lp->loopid, lp->portid);
mbs.param[0] = MBOX_FABRIC_LOGOUT;
mbs.param[1] = lp->loopid << 8;
mbs.param[2] = 0;
mbs.param[3] = 0;
isp_mboxcmd(isp, &mbs);
}
} else
#endif
CFGPRINTF("%s: Loop ID %d, ALPA 0x%x Loop State 0x%x topology '%s'\n",
isp->isp_name, fcp->isp_loopid, fcp->isp_alpa, fcp->isp_loopstate,
toponames[topo]);
return (0);
}
/*
* Compare two local port db entities and return 1 if they're the same, else 0.
*/
static int
isp_same_lportdb(a, b)
struct lportdb *a, *b;
{
/*
* We decide two lports are the same if they have non-zero and
* identical port WWNs and identical loop IDs.
*/
if (a->port_wwn == 0 || a->port_wwn != b->port_wwn ||
a->loopid != b->loopid) {
return (0);
} else {
return (1);
}
}
/*
* Synchronize our soft copy of the port database with what the f/w thinks
* (with a view toward possibly for a specific target....)
*/
static int
isp_pdb_sync(isp, target)
struct ispsoftc *isp;
int target;
{
struct lportdb *lp, *tport;
fcparam *fcp = isp->isp_param;
isp_pdb_t pdb;
int loopid, lim;
#ifdef ISP2100_FABRIC
/*
* XXX: If we do this *after* building up our local port database,
* XXX: the commands simply don't work.
*/
/*
* (Re)discover all fabric devices
*/
if (fcp->isp_onfabric)
(void) isp_scan_fabric(isp);
#endif
/*
* Run through the local loop ports and get port database info
* for each loop ID.
*
* There's a somewhat unexplained situation where the f/w passes back
* the wrong database entity- if that happens, just restart (up to
* FL_PORT_ID times).
*/
tport = fcp->tport;
/*
* make sure the temp port database is clean...
*/
MEMZERO((void *) tport, sizeof (tport));
for (lim = loopid = 0; loopid < FL_PORT_ID; loopid++) {
lp = &tport[loopid];
lp->node_wwn = isp_get_portname(isp, loopid, 1);
if (lp->node_wwn == 0)
continue;
lp->port_wwn = isp_get_portname(isp, loopid, 0);
if (lp->port_wwn == 0) {
lp->node_wwn = 0;
continue;
}
/*
* Get an entry....
*/
if (isp_getpdb(isp, loopid, &pdb) != 0) {
continue;
}
/*
* If the returned database element doesn't match what we
* asked for, restart the process entirely (up to a point...).
*/
if (pdb.pdb_loopid != loopid) {
IDPRINTF(1, ("%s: wankage (%d != %d)\n",
isp->isp_name, pdb.pdb_loopid, loopid));
loopid = 0;
if (lim++ < FL_PORT_ID) {
continue;
}
PRINTF("%s: giving up on synchronizing the port "
"database\n", isp->isp_name);
return (-1);
}
/*
* Save the pertinent info locally.
*/
lp->node_wwn =
(((u_int64_t)pdb.pdb_nodename[0]) << 56) |
(((u_int64_t)pdb.pdb_nodename[1]) << 48) |
(((u_int64_t)pdb.pdb_nodename[2]) << 40) |
(((u_int64_t)pdb.pdb_nodename[3]) << 32) |
(((u_int64_t)pdb.pdb_nodename[4]) << 24) |
(((u_int64_t)pdb.pdb_nodename[5]) << 16) |
(((u_int64_t)pdb.pdb_nodename[6]) << 8) |
(((u_int64_t)pdb.pdb_nodename[7]));
lp->port_wwn =
(((u_int64_t)pdb.pdb_portname[0]) << 56) |
(((u_int64_t)pdb.pdb_portname[1]) << 48) |
(((u_int64_t)pdb.pdb_portname[2]) << 40) |
(((u_int64_t)pdb.pdb_portname[3]) << 32) |
(((u_int64_t)pdb.pdb_portname[4]) << 24) |
(((u_int64_t)pdb.pdb_portname[5]) << 16) |
(((u_int64_t)pdb.pdb_portname[6]) << 8) |
(((u_int64_t)pdb.pdb_portname[7]));
lp->roles =
(pdb.pdb_prli_svc3 & SVC3_ROLE_MASK) >> SVC3_ROLE_SHIFT;
lp->portid = BITS2WORD(pdb.pdb_portid_bits);
lp->loopid = pdb.pdb_loopid;
/*
* Do a quick check to see whether this matches the saved port
* database for the same loopid. We do this here to save
* searching later (if possible). Note that this fails over
* time as things shuffle on the loop- we get the current
* loop state (where loop id as an index matches loop id in
* use) and then compare it to our saved database which
* never shifts.
*/
if (target >= 0 && isp_same_lportdb(lp, &fcp->portdb[target])) {
lp->valid = 1;
}
}
/*
* If we get this far, we've settled our differences with the f/w
* and we can say that the loop state is ready.
*/
fcp->isp_loopstate = LOOP_READY;
/*
* Mark all of the permanent local loop database entries as invalid.
*/
for (loopid = 0; loopid < FL_PORT_ID; loopid++) {
fcp->portdb[loopid].valid = 0;
}
/*
* Now merge our local copy of the port database into our saved copy.
* Notify the outer layers of new devices arriving.
*/
for (loopid = 0; loopid < FL_PORT_ID; loopid++) {
int i;
/*
* If we don't have a non-zero Port WWN, we're not here.
*/
if (tport[loopid].port_wwn == 0) {
continue;
}
/*
* If we've already marked our tmp copy as valid,
* this means that we've decided that it's the
* same as our saved data base. This didn't include
* the 'valid' marking so we have set that here.
*/
if (tport[loopid].valid) {
fcp->portdb[loopid].valid = 1;
continue;
}
/*
* For the purposes of deciding whether this is the
* 'same' device or not, we only search for an identical
* Port WWN. Node WWNs may or may not be the same as
* the Port WWN, and there may be multiple different
* Port WWNs with the same Node WWN. It would be chaos
* to have multiple identical Port WWNs, so we don't
* allow that.
*/
for (i = 0; i < FL_PORT_ID; i++) {
int j;
if (fcp->portdb[i].port_wwn == 0)
continue;
if (fcp->portdb[i].port_wwn != tport[loopid].port_wwn)
continue;
/*
* We found this WWN elsewhere- it's changed
* loopids then. We don't change it's actual
* position in our cached port database- we
* just change the actual loop ID we'd use.
*/
if (fcp->portdb[i].loopid != loopid) {
PRINTF("%s: Target ID %d Loop 0x%x (Port 0x%x) "
"=> Loop 0x%x (Port 0x%x) \n",
isp->isp_name, i, fcp->portdb[i].loopid,
fcp->portdb[i].portid, loopid,
tport[loopid].portid);
}
fcp->portdb[i].portid = tport[loopid].portid;
fcp->portdb[i].loopid = loopid;
fcp->portdb[i].valid = 1;
/*
* XXX: Should we also propagate roles in case they
* XXX: changed?
*/
/*
* Now make sure this Port WWN doesn't exist elsewhere
* in the port database.
*/
for (j = i+1; j < FL_PORT_ID; j++) {
if (fcp->portdb[i].port_wwn !=
fcp->portdb[j].port_wwn) {
continue;
}
PRINTF("%s: Target ID %d Duplicates Target ID "
"%d- killing off both\n",
isp->isp_name, j, i);
/*
* Invalidate the 'old' *and* 'new' ones.
* This is really harsh and not quite right,
* but if this happens, we really don't know
* who is what at this point.
*/
fcp->portdb[i].valid = 0;
fcp->portdb[j].valid = 0;
}
break;
}
/*
* If we didn't traverse the entire port database,
* then we found (and remapped) an existing entry.
* No need to notify anyone- go for the next one.
*/
if (i < FL_PORT_ID) {
continue;
}
/*
* We've not found this Port WWN anywhere. It's a new entry.
* See if we can leave it where it is (with target == loopid).
*/
if (fcp->portdb[loopid].port_wwn != 0) {
for (lim = 0; lim < FL_PORT_ID; lim++) {
if (fcp->portdb[lim].port_wwn == 0)
break;
}
/* "Cannot Happen" */
if (lim == FL_PORT_ID) {
PRINTF("%s: remap overflow?\n", isp->isp_name);
continue;
}
i = lim;
} else {
i = loopid;
}
/*
* NB: The actual loopid we use here is loopid- we may
* in fact be at a completely different index (target).
*/
fcp->portdb[i].loopid = loopid;
fcp->portdb[i].port_wwn = tport[loopid].port_wwn;
fcp->portdb[i].node_wwn = tport[loopid].node_wwn;
fcp->portdb[i].roles = tport[loopid].roles;
fcp->portdb[i].portid = tport[loopid].portid;
fcp->portdb[i].valid = 1;
/*
* Tell the outside world we've arrived.
*/
(void) isp_async(isp, ISPASYNC_PDB_CHANGED, &i);
}
/*
* Now find all previously used targets that are now invalid and
* notify the outer layers that they're gone.
*/
for (lp = fcp->portdb; lp < &fcp->portdb[FL_PORT_ID]; lp++) {
if (lp->valid || lp->port_wwn == 0)
continue;
/*
* Tell the outside world we've gone away.
*/
loopid = lp - fcp->portdb;
(void) isp_async(isp, ISPASYNC_PDB_CHANGED, &loopid);
MEMZERO((void *) lp, sizeof (*lp));
}
#ifdef ISP2100_FABRIC
/*
* Now log in any fabric devices
*/
for (lim = FC_SNS_ID+1, lp = &fcp->portdb[FC_SNS_ID+1];
lp < &fcp->portdb[MAX_FC_TARG]; lp++) {
u_int32_t portid;
mbreg_t mbs;
/*
* Nothing here?
*/
if (lp->port_wwn == 0)
continue;
/*
* Don't try to log into yourself.
*/
if ((portid = lp->portid) == fcp->isp_portid)
continue;
/*
* Force a logout if we were logged in.
*/
if (lp->valid) {
mbs.param[0] = MBOX_FABRIC_LOGOUT;
mbs.param[1] = lp->loopid << 8;
mbs.param[2] = 0;
mbs.param[3] = 0;
isp_mboxcmd(isp, &mbs);
lp->valid = 0;
}
/*
* And log in....
*/
loopid = lp - fcp->portdb;
lp->loopid = 0;
lim = 0;
do {
mbs.param[0] = MBOX_FABRIC_LOGIN;
mbs.param[1] = loopid << 8;
if (IS_2200(isp)) {
/* only issue a PLOGI if not logged in */
mbs.param[1] |= 0x1;
}
mbs.param[2] = portid >> 16;
mbs.param[3] = portid & 0xffff;
isp_mboxcmd(isp, &mbs);
switch (mbs.param[0]) {
case MBOX_LOOP_ID_USED:
/*
* Try the next available loop id.
*/
loopid++;
break;
case MBOX_PORT_ID_USED:
/*
* This port is already logged in.
* Snaffle the loop id it's using.
*/
if ((loopid = mbs.param[1]) == 0) {
lim = -1;
}
/* FALLTHROUGH */
case MBOX_COMMAND_COMPLETE:
lp->loopid = loopid;
lim = 1;
break;
case MBOX_COMMAND_ERROR:
PRINTF("%s: command error in PLOGI (0x%x)\n",
isp->isp_name, mbs.param[1]);
/* FALLTHROUGH */
case MBOX_ALL_IDS_USED: /* We're outta IDs */
default:
lim = -1;
break;
}
} while (lim == 0 && loopid < MAX_FC_TARG);
if (lim < 0)
continue;
lp->valid = 1;
lp->fabdev = 1;
if (isp_getpdb(isp, lp->loopid, &pdb) != 0) {
/*
* Be kind...
*/
lp->roles = (SVC3_TGT_ROLE >> SVC3_ROLE_SHIFT);
PRINTF("%s: Faked PortID 0x%x into LoopID %d\n",
isp->isp_name, lp->portid, lp->loopid);
continue;
}
if (pdb.pdb_loopid != lp->loopid) {
lp->roles = (SVC3_TGT_ROLE >> SVC3_ROLE_SHIFT);
PRINTF("%s: Wanked PortID 0x%x to LoopID %d\n",
isp->isp_name, lp->portid, lp->loopid);
continue;
}
lp->roles =
(pdb.pdb_prli_svc3 & SVC3_ROLE_MASK) >> SVC3_ROLE_SHIFT;
lp->portid = BITS2WORD(pdb.pdb_portid_bits);
lp->node_wwn =
(((u_int64_t)pdb.pdb_nodename[0]) << 56) |
(((u_int64_t)pdb.pdb_nodename[1]) << 48) |
(((u_int64_t)pdb.pdb_nodename[2]) << 40) |
(((u_int64_t)pdb.pdb_nodename[3]) << 32) |
(((u_int64_t)pdb.pdb_nodename[4]) << 24) |
(((u_int64_t)pdb.pdb_nodename[5]) << 16) |
(((u_int64_t)pdb.pdb_nodename[6]) << 8) |
(((u_int64_t)pdb.pdb_nodename[7]));
lp->port_wwn =
(((u_int64_t)pdb.pdb_portname[0]) << 56) |
(((u_int64_t)pdb.pdb_portname[1]) << 48) |
(((u_int64_t)pdb.pdb_portname[2]) << 40) |
(((u_int64_t)pdb.pdb_portname[3]) << 32) |
(((u_int64_t)pdb.pdb_portname[4]) << 24) |
(((u_int64_t)pdb.pdb_portname[5]) << 16) |
(((u_int64_t)pdb.pdb_portname[6]) << 8) |
(((u_int64_t)pdb.pdb_portname[7]));
/*
* Check to make sure this all makes sense.
*/
if (lp->node_wwn && lp->port_wwn) {
loopid = lp - fcp->portdb;
(void) isp_async(isp, ISPASYNC_PDB_CHANGED, &loopid);
continue;
}
lp->fabdev = lp->valid = 0;
PRINTF("%s: Target %d (Loop 0x%x) Port ID 0x%x lost its WWN\n",
isp->isp_name, loopid, lp->loopid, lp->portid);
mbs.param[0] = MBOX_FABRIC_LOGOUT;
mbs.param[1] = lp->loopid << 8;
mbs.param[2] = 0;
mbs.param[3] = 0;
isp_mboxcmd(isp, &mbs);
}
#endif
/*
* If we get here, we've for sure seen not only a valid loop
* but know what is or isn't on it, so mark this for usage
* in ispscsicmd.
*/
fcp->loop_seen_once = 1;
return (0);
}
#ifdef ISP2100_FABRIC
static int
isp_scan_fabric(isp)
struct ispsoftc *isp;
{
fcparam *fcp = isp->isp_param;
u_int32_t portid, first_nz_portid;
sns_screq_t *reqp;
sns_scrsp_t *resp;
mbreg_t mbs;
int hicap;
reqp = (sns_screq_t *) fcp->isp_scratch;
resp = (sns_scrsp_t *) (&((char *)fcp->isp_scratch)[0x100]);
first_nz_portid = portid = fcp->isp_portid;
for (hicap = 0; hicap < 1024; hicap++) {
MEMZERO((void *) reqp, SNS_GAN_REQ_SIZE);
reqp->snscb_rblen = SNS_GAN_RESP_SIZE >> 1;
reqp->snscb_addr[RQRSP_ADDR0015] =
DMA_LSW(fcp->isp_scdma + 0x100);
reqp->snscb_addr[RQRSP_ADDR1631] =
DMA_MSW(fcp->isp_scdma + 0x100);
reqp->snscb_sblen = 6;
reqp->snscb_data[0] = SNS_GAN;
reqp->snscb_data[4] = portid & 0xffff;
reqp->snscb_data[5] = (portid >> 16) & 0xff;
ISP_SWIZZLE_SNS_REQ(isp, reqp);
mbs.param[0] = MBOX_SEND_SNS;
mbs.param[1] = SNS_GAN_REQ_SIZE >> 1;
mbs.param[2] = DMA_MSW(fcp->isp_scdma);
mbs.param[3] = DMA_LSW(fcp->isp_scdma);
mbs.param[6] = 0;
mbs.param[7] = 0;
MemoryBarrier();
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
IDPRINTF(1, ("%s: SNS failed (0x%x)\n", isp->isp_name,
mbs.param[0]));
return (-1);
}
ISP_UNSWIZZLE_SNS_RSP(isp, resp, SNS_GAN_RESP_SIZE >> 1);
portid = (((u_int32_t) resp->snscb_port_id[0]) << 16) |
(((u_int32_t) resp->snscb_port_id[1]) << 8) |
(((u_int32_t) resp->snscb_port_id[2]));
if (isp_async(isp, ISPASYNC_FABRIC_DEV, resp)) {
return (-1);
}
if (first_nz_portid == 0 && portid) {
first_nz_portid = portid;
}
if (first_nz_portid == portid) {
return (0);
}
}
/*
* We either have a broken name server or a huge fabric if we get here.
*/
return (0);
}
#endif
/*
* Start a command. Locking is assumed done in the caller.
*/
int32_t
ispscsicmd(xs)
ISP_SCSI_XFER_T *xs;
{
struct ispsoftc *isp;
u_int16_t iptr, optr;
union {
ispreq_t *_reqp;
ispreqt2_t *_t2reqp;
} _u;
#define reqp _u._reqp
#define t2reqp _u._t2reqp
#define UZSIZE max(sizeof (ispreq_t), sizeof (ispreqt2_t))
int target, i;
XS_INITERR(xs);
isp = XS_ISP(xs);
if (isp->isp_state != ISP_RUNSTATE) {
PRINTF("%s: adapter not ready\n", isp->isp_name);
XS_SETERR(xs, HBA_BOTCH);
return (CMD_COMPLETE);
}
/*
* Check command CDB length, etc.. We really are limited to 16 bytes
* for Fibre Channel, but can do up to 44 bytes in parallel SCSI,
* but probably only if we're running fairly new firmware (we'll
* let the old f/w choke on an extended command queue entry).
*/
if (XS_CDBLEN(xs) > (IS_FC(isp)? 16 : 44) || XS_CDBLEN(xs) == 0) {
PRINTF("%s: unsupported cdb length (%d, CDB[0]=0x%x)\n",
isp->isp_name, XS_CDBLEN(xs), XS_CDBP(xs)[0] & 0xff);
XS_SETERR(xs, HBA_BOTCH);
return (CMD_COMPLETE);
}
/*
* Check to see whether we have good firmware state still or
* need to refresh our port database for this target.
*/
target = XS_TGT(xs);
if (IS_FC(isp)) {
fcparam *fcp = isp->isp_param;
struct lportdb *lp;
#if defined(ISP2100_FABRIC)
if (target >= FL_PORT_ID) {
/*
* If we're not on a Fabric, we can't have a target
* above FL_PORT_ID-1. If we're on a fabric, we
* can't have a target less than FC_SNS_ID+1.
*/
if (fcp->isp_onfabric == 0 || target <= FC_SNS_ID) {
XS_SETERR(xs, HBA_SELTIMEOUT);
return (CMD_COMPLETE);
}
}
#endif
/*
* Check for f/w being in ready state. If the f/w
* isn't in ready state, then we don't know our
* loop ID and the f/w hasn't completed logging
* into all targets on the loop. If this is the
* case, then bounce the command. We pretend this is
* a SELECTION TIMEOUT error if we've never gone to
* FW_READY state at all- in this case we may not
* be hooked to a loop at all and we shouldn't hang
* the machine for this. Otherwise, defer this command
* until later.
*/
if (fcp->isp_fwstate != FW_READY) {
if (isp_fclink_test(isp, FC_FW_READY_DELAY)) {
XS_SETERR(xs, HBA_SELTIMEOUT);
if (fcp->loop_seen_once) {
return (CMD_RQLATER);
} else {
return (CMD_COMPLETE);
}
}
}
/*
* If our loop state is such that we haven't yet received
* a "Port Database Changed" notification (after a LIP or
* a Loop Reset or firmware initialization), then defer
* sending commands for a little while, but only if we've
* seen a valid loop at one point (otherwise we can get
* stuck at initialization time).
*/
if (fcp->isp_loopstate < LOOP_PDB_RCVD) {
XS_SETERR(xs, HBA_SELTIMEOUT);
if (fcp->loop_seen_once) {
return (CMD_RQLATER);
} else {
return (CMD_COMPLETE);
}
}
/*
* If our loop state is now such that we've just now
* received a Port Database Change notification, then
* we have to go off and (re)synchronize our port
* database.
*/
if (fcp->isp_loopstate == LOOP_PDB_RCVD) {
if (isp_pdb_sync(isp, target)) {
XS_SETERR(xs, HBA_SELTIMEOUT);
return (CMD_COMPLETE);
}
}
/*
* Now check whether we should even think about pursuing this.
*/
lp = &fcp->portdb[target];
if (lp->valid == 0) {
XS_SETERR(xs, HBA_SELTIMEOUT);
return (CMD_COMPLETE);
}
if ((lp->roles & (SVC3_TGT_ROLE >> SVC3_ROLE_SHIFT)) == 0) {
IDPRINTF(3, ("%s: target %d is not a target\n",
isp->isp_name, target));
XS_SETERR(xs, HBA_SELTIMEOUT);
return (CMD_COMPLETE);
}
/*
* Now turn target into what the actual loop ID is.
*/
target = lp->loopid;
}
/*
* Next check to see if any HBA or Device
* parameters need to be updated.
*/
if (isp->isp_update != 0) {
isp_update(isp);
}
if (isp_getrqentry(isp, &iptr, &optr, (void **) &reqp)) {
IDPRINTF(1, ("%s: Request Queue Overflow\n", isp->isp_name));
XS_SETERR(xs, HBA_BOTCH);
return (CMD_EAGAIN);
}
/*
* Now see if we need to synchronize the ISP with respect to anything.
* We do dual duty here (cough) for synchronizing for busses other
* than which we got here to send a command to.
*/
if (isp->isp_sendmarker) {
u_int8_t n = (IS_DUALBUS(isp)? 2: 1);
/*
* Check ports to send markers for...
*/
for (i = 0; i < n; i++) {
if ((isp->isp_sendmarker & (1 << i)) == 0) {
continue;
}
MEMZERO((void *) reqp, sizeof (*reqp));
reqp->req_header.rqs_entry_count = 1;
reqp->req_header.rqs_entry_type = RQSTYPE_MARKER;
reqp->req_modifier = SYNC_ALL;
reqp->req_target = i << 7; /* insert bus number */
ISP_SWIZZLE_REQUEST(isp, reqp);
MemoryBarrier();
ISP_ADD_REQUEST(isp, iptr);
if (isp_getrqentry(isp, &iptr, &optr, (void **)&reqp)) {
IDPRINTF(1, ("%s: Request Queue Overflow+\n",
isp->isp_name));
XS_SETERR(xs, HBA_BOTCH);
return (CMD_EAGAIN);
}
}
}
MEMZERO((void *) reqp, UZSIZE);
reqp->req_header.rqs_entry_count = 1;
if (IS_FC(isp)) {
reqp->req_header.rqs_entry_type = RQSTYPE_T2RQS;
} else {
if (XS_CDBLEN(xs) > 12)
reqp->req_header.rqs_entry_type = RQSTYPE_CMDONLY;
else
reqp->req_header.rqs_entry_type = RQSTYPE_REQUEST;
}
reqp->req_header.rqs_flags = 0;
reqp->req_header.rqs_seqno = 0;
if (IS_FC(isp)) {
/*
* See comment in isp_intr
*/
XS_RESID(xs) = 0;
/*
* Fibre Channel always requires some kind of tag.
* The Qlogic drivers seem be happy not to use a tag,
* but this breaks for some devices (IBM drives).
*/
if (XS_CANTAG(xs)) {
t2reqp->req_flags = XS_KINDOF_TAG(xs);
} else {
if (XS_CDBP(xs)[0] == 0x3) /* REQUEST SENSE */
t2reqp->req_flags = REQFLAG_HTAG;
else
t2reqp->req_flags = REQFLAG_OTAG;
}
} else {
sdparam *sdp = (sdparam *)isp->isp_param;
if ((sdp->isp_devparam[target].cur_dflags & DPARM_TQING) &&
XS_CANTAG(xs)) {
reqp->req_flags = XS_KINDOF_TAG(xs);
}
}
reqp->req_target = target | (XS_CHANNEL(xs) << 7);
if (IS_SCSI(isp)) {
reqp->req_lun_trn = XS_LUN(xs);
reqp->req_cdblen = XS_CDBLEN(xs);
} else {
#ifdef ISP2100_SCCLUN
t2reqp->req_scclun = XS_LUN(xs);
#else
t2reqp->req_lun_trn = XS_LUN(xs);
#endif
}
MEMCPY(reqp->req_cdb, XS_CDBP(xs), XS_CDBLEN(xs));
reqp->req_time = XS_TIME(xs) / 1000;
if (reqp->req_time == 0 && XS_TIME(xs))
reqp->req_time = 1;
/*
* Always give a bit more leeway to commands after a bus reset.
* XXX: DOES NOT DISTINGUISH WHICH PORT MAY HAVE BEEN SYNCED
*/
if (isp->isp_sendmarker && reqp->req_time < 5) {
reqp->req_time = 5;
}
if (isp_save_xs(isp, xs, &reqp->req_handle)) {
IDPRINTF(2, ("%s: out of xflist pointers\n", isp->isp_name));
XS_SETERR(xs, HBA_BOTCH);
return (CMD_EAGAIN);
}
/*
* Set up DMA and/or do any bus swizzling of the request entry
* so that the Qlogic F/W understands what is being asked of it.
*/
i = ISP_DMASETUP(isp, xs, reqp, &iptr, optr);
if (i != CMD_QUEUED) {
isp_destroy_handle(isp, reqp->req_handle);
/*
* dmasetup sets actual error in packet, and
* return what we were given to return.
*/
return (i);
}
XS_SETERR(xs, HBA_NOERROR);
IDPRINTF(5, ("%s(%d.%d.%d): START cmd 0x%x datalen %d\n",
isp->isp_name, XS_CHANNEL(xs), target, XS_LUN(xs),
reqp->req_cdb[0], XS_XFRLEN(xs)));
MemoryBarrier();
ISP_ADD_REQUEST(isp, iptr);
isp->isp_nactive++;
if (isp->isp_sendmarker)
isp->isp_sendmarker = 0;
return (CMD_QUEUED);
#undef reqp
#undef t2reqp
}
/*
* isp control
* Locks (ints blocked) assumed held.
*/
int
isp_control(isp, ctl, arg)
struct ispsoftc *isp;
ispctl_t ctl;
void *arg;
{
ISP_SCSI_XFER_T *xs;
mbreg_t mbs;
int bus, tgt;
u_int32_t handle;
switch (ctl) {
default:
PRINTF("%s: isp_control unknown control op %x\n",
isp->isp_name, ctl);
break;
case ISPCTL_RESET_BUS:
/*
* Issue a bus reset.
*/
mbs.param[0] = MBOX_BUS_RESET;
mbs.param[2] = 0;
if (IS_SCSI(isp)) {
mbs.param[1] =
((sdparam *) isp->isp_param)->isp_bus_reset_delay;
if (mbs.param[1] < 2)
mbs.param[1] = 2;
bus = *((int *) arg);
if (IS_DUALBUS(isp))
mbs.param[2] = bus;
} else {
mbs.param[1] = 10;
bus = 0;
}
isp->isp_sendmarker = 1 << bus;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
isp_dumpregs(isp, "isp_control SCSI bus reset failed");
break;
}
CFGPRINTF("%s: driver initiated bus reset of bus %d\n",
isp->isp_name, bus);
return (0);
case ISPCTL_RESET_DEV:
tgt = (*((int *) arg)) & 0xffff;
bus = (*((int *) arg)) >> 16;
mbs.param[0] = MBOX_ABORT_TARGET;
mbs.param[1] = (tgt << 8) | (bus << 15);
mbs.param[2] = 3; /* 'delay', in seconds */
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: isp_control MBOX_RESET_DEV failure (code "
"%x)\n", isp->isp_name, mbs.param[0]);
break;
}
PRINTF("%s: Target %d on Bus %d Reset Succeeded\n",
isp->isp_name, tgt, bus);
isp->isp_sendmarker = 1 << bus;
return (0);
case ISPCTL_ABORT_CMD:
xs = (ISP_SCSI_XFER_T *) arg;
handle = isp_find_handle(isp, xs);
if (handle == 0) {
PRINTF("%s: isp_control- cannot find command to abort "
"in active list\n", isp->isp_name);
break;
}
bus = XS_CHANNEL(xs);
mbs.param[0] = MBOX_ABORT;
if (IS_FC(isp)) {
#ifdef ISP2100_SCCLUN
mbs.param[1] = XS_TGT(xs) << 8;
mbs.param[4] = 0;
mbs.param[5] = 0;
mbs.param[6] = XS_LUN(xs);
#else
mbs.param[1] = XS_TGT(xs) << 8 | XS_LUN(xs);
#endif
} else {
mbs.param[1] =
(bus << 15) | (XS_TGT(xs) << 8) | XS_LUN(xs);
}
mbs.param[3] = handle >> 16;
mbs.param[2] = handle & 0xffff;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: isp_control MBOX_ABORT failure (code %x)\n",
isp->isp_name, mbs.param[0]);
break;
}
PRINTF("%s: command for target %d lun %d was aborted\n",
isp->isp_name, XS_TGT(xs), XS_LUN(xs));
return (0);
case ISPCTL_UPDATE_PARAMS:
isp_update(isp);
return (0);
case ISPCTL_FCLINK_TEST:
return (isp_fclink_test(isp, FC_FW_READY_DELAY));
case ISPCTL_PDB_SYNC:
return (isp_pdb_sync(isp, -1));
#ifdef ISP_TARGET_MODE
case ISPCTL_TOGGLE_TMODE:
if (IS_SCSI(isp)) {
int ena = *(int *)arg;
mbs.param[0] = MBOX_ENABLE_TARGET_MODE;
mbs.param[1] = (ena)? ENABLE_TARGET_FLAG : 0;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: cannot %sable target mode (0x%x)\n",
isp->isp_name, ena? "en" : "dis",
mbs.param[0]);
break;
}
}
return (0);
#endif
}
return (-1);
}
/*
* Interrupt Service Routine(s).
*
* External (OS) framework has done the appropriate locking,
* and the locking will be held throughout this function.
*/
int
isp_intr(arg)
void *arg;
{
ISP_SCSI_XFER_T *complist[RESULT_QUEUE_LEN], *xs;
struct ispsoftc *isp = arg;
u_int16_t iptr, optr;
u_int16_t isr, isrb, sema;
int i, nlooked = 0, ndone = 0;
/*
* Well, if we've disabled interrupts, we may get a case where
* isr isn't set, but sema is. In any case, debounce isr reads.
*/
do {
isr = ISP_READ(isp, BIU_ISR);
isrb = ISP_READ(isp, BIU_ISR);
} while (isr != isrb);
sema = ISP_READ(isp, BIU_SEMA) & 0x1;
IDPRINTF(5, ("%s: isp_intr isr %x sem %x\n", isp->isp_name, isr, sema));
if (isr == 0) {
return (0);
}
if (!INT_PENDING(isp, isr)) {
IDPRINTF(4, ("%s: isp_intr isr=%x\n", isp->isp_name, isr));
return (0);
}
if (isp->isp_state != ISP_RUNSTATE) {
IDPRINTF(3, ("%s: interrupt (isr=%x,sema=%x) when not ready\n",
isp->isp_name, isr, sema));
ISP_WRITE(isp, INMAILBOX5, ISP_READ(isp, OUTMAILBOX5));
ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT);
ISP_WRITE(isp, BIU_SEMA, 0);
ENABLE_INTS(isp);
return (1);
}
if (sema) {
u_int16_t mbox = ISP_READ(isp, OUTMAILBOX0);
if (mbox & 0x4000) {
IDPRINTF(4, ("%s: Command Mbox 0x%x\n",
isp->isp_name, mbox));
} else {
u_int32_t fhandle = isp_parse_async(isp, (int) mbox);
IDPRINTF(4, ("%s: Async Mbox 0x%x\n",
isp->isp_name, mbox));
if (fhandle > 0) {
isp_fastpost_complete(isp, fhandle);
}
}
ISP_WRITE(isp, BIU_SEMA, 0);
ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT);
ENABLE_INTS(isp);
return (1);
}
/*
* You *must* read OUTMAILBOX5 prior to clearing the RISC interrupt.
*/
optr = isp->isp_residx;
iptr = ISP_READ(isp, OUTMAILBOX5);
ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT);
if (optr == iptr) {
IDPRINTF(4, ("why intr? isr %x iptr %x optr %x\n",
isr, optr, iptr));
}
while (optr != iptr) {
ispstatusreq_t *sp;
u_int16_t oop;
int buddaboom = 0;
sp = (ispstatusreq_t *) ISP_QUEUE_ENTRY(isp->isp_result, optr);
oop = optr;
optr = ISP_NXT_QENTRY(optr, RESULT_QUEUE_LEN);
nlooked++;
MemoryBarrier();
/*
* Do any appropriate unswizzling of what the Qlogic f/w has
* written into memory so it makes sense to us. This is a
* per-platform thing.
*/
ISP_UNSWIZZLE_RESPONSE(isp, sp);
if (sp->req_header.rqs_entry_type != RQSTYPE_RESPONSE) {
if (isp_handle_other_response(isp, sp, &optr) == 0) {
continue;
}
/*
* It really has to be a bounced request just copied
* from the request queue to the response queue. If
* not, something bad has happened.
*/
if (sp->req_header.rqs_entry_type != RQSTYPE_REQUEST) {
PRINTF("%s: not RESPONSE in RESPONSE Queue "
"(type 0x%x) @ idx %d (next %d)\n",
isp->isp_name,
sp->req_header.rqs_entry_type, oop, optr);
continue;
}
buddaboom = 1;
}
if (sp->req_header.rqs_flags & 0xf) {
#define _RQS_OFLAGS \
~(RQSFLAG_CONTINUATION|RQSFLAG_FULL|RQSFLAG_BADHEADER|RQSFLAG_BADPACKET)
if (sp->req_header.rqs_flags & RQSFLAG_CONTINUATION) {
IDPRINTF(4, ("%s: continuation segment\n",
isp->isp_name));
ISP_WRITE(isp, INMAILBOX5, optr);
continue;
}
if (sp->req_header.rqs_flags & RQSFLAG_FULL) {
IDPRINTF(2, ("%s: internal queues full\n",
isp->isp_name));
/*
* We'll synthesize a QUEUE FULL message below.
*/
}
if (sp->req_header.rqs_flags & RQSFLAG_BADHEADER) {
PRINTF("%s: bad header\n", isp->isp_name);
buddaboom++;
}
if (sp->req_header.rqs_flags & RQSFLAG_BADPACKET) {
PRINTF("%s: bad request packet\n",
isp->isp_name);
buddaboom++;
}
if (sp->req_header.rqs_flags & _RQS_OFLAGS) {
PRINTF("%s: unknown flags in response (0x%x)\n",
isp->isp_name, sp->req_header.rqs_flags);
buddaboom++;
}
#undef _RQS_OFLAGS
}
if (sp->req_handle > isp->isp_maxcmds || sp->req_handle < 1) {
PRINTF("%s: bad request handle %d\n", isp->isp_name,
sp->req_handle);
ISP_WRITE(isp, INMAILBOX5, optr);
continue;
}
xs = isp_find_xs(isp, sp->req_handle);
if (xs == NULL) {
PRINTF("%s: NULL xs in xflist (handle 0x%x)\n",
isp->isp_name, sp->req_handle);
ISP_WRITE(isp, INMAILBOX5, optr);
continue;
}
isp_destroy_handle(isp, sp->req_handle);
if (sp->req_status_flags & RQSTF_BUS_RESET) {
isp->isp_sendmarker |= (1 << XS_CHANNEL(xs));
}
if (buddaboom) {
XS_SETERR(xs, HBA_BOTCH);
}
XS_STS(xs) = sp->req_scsi_status & 0xff;
if (IS_SCSI(isp)) {
if (sp->req_state_flags & RQSF_GOT_SENSE) {
MEMCPY(XS_SNSP(xs), sp->req_sense_data,
XS_SNSLEN(xs));
XS_SNS_IS_VALID(xs);
}
/*
* A new synchronous rate was negotiated for this
* target. Mark state such that we'll go look up
* that which has changed later.
*/
if (sp->req_status_flags & RQSTF_NEGOTIATION) {
sdparam *sdp = isp->isp_param;
sdp += XS_CHANNEL(xs);
sdp->isp_devparam[XS_TGT(xs)].dev_refresh = 1;
isp->isp_update |= (1 << XS_CHANNEL(xs));
}
} else {
if (sp->req_scsi_status & RQCS_SV) {
int amt = min(XS_SNSLEN(xs), sp->req_sense_len);
MEMCPY(XS_SNSP(xs), sp->req_sense_data, amt);
XS_SNS_IS_VALID(xs);
sp->req_state_flags |= RQSF_GOT_SENSE;
} else if (XS_STS(xs) == SCSI_CHECK) {
IDPRINTF(1, ("%s: check condition with no sense"
" data\n", isp->isp_name));
}
}
if (XS_NOERR(xs) && XS_STS(xs) == SCSI_BUSY) {
XS_SETERR(xs, HBA_TGTBSY);
}
if (sp->req_header.rqs_entry_type == RQSTYPE_RESPONSE) {
if (XS_NOERR(xs)) {
if (sp->req_completion_status != RQCS_COMPLETE) {
isp_parse_status(isp, sp, xs);
} else {
XS_SETERR(xs, HBA_NOERROR);
}
}
} else if (sp->req_header.rqs_entry_type == RQSTYPE_REQUEST) {
if (sp->req_header.rqs_flags & RQSFLAG_FULL) {
/*
* Force Queue Full status.
*/
XS_STS(xs) = SCSI_QFULL;
XS_SETERR(xs, HBA_NOERROR);
} else if (XS_NOERR(xs)) {
XS_SETERR(xs, HBA_BOTCH);
}
} else {
PRINTF("%s: unhandled respose queue type 0x%x\n",
isp->isp_name, sp->req_header.rqs_entry_type);
if (XS_NOERR(xs)) {
XS_SETERR(xs, HBA_BOTCH);
}
}
if (IS_SCSI(isp)) {
XS_RESID(xs) = sp->req_resid;
} else if (sp->req_scsi_status & RQCS_RU) {
XS_RESID(xs) = sp->req_resid;
IDPRINTF(4, ("%s: cnt %d rsd %d\n", isp->isp_name,
XS_XFRLEN(xs), sp->req_resid));
}
if (XS_XFRLEN(xs)) {
ISP_DMAFREE(isp, xs, sp->req_handle);
}
/*
* Let the platforms cope.
*/
#if 0
/*
* XXX: If we have a check condition, but no Sense Data,
* XXX: mark it as an error (ARQ failed). We need to
* XXX: to do a more distinct job because there may
* XXX: cases where ARQ is disabled.
*/
if (XS_STS(xs) == SCSI_CHECK && !(XS_IS_SNS_VALID(xs))) {
if (XS_NOERR(xs)) {
PRINTF("%s: ARQ failure for target %d lun %d\n",
isp->isp_name, XS_TGT(xs), XS_LUN(xs));
XS_SETERR(xs, HBA_ARQFAIL);
}
}
#endif
if ((isp->isp_dblev >= 5) ||
(isp->isp_dblev > 2 && !XS_NOERR(xs))) {
PRINTF("%s(%d.%d): FIN dl%d resid%d STS %x",
isp->isp_name, XS_TGT(xs), XS_LUN(xs),
XS_XFRLEN(xs), XS_RESID(xs), XS_STS(xs));
if (sp->req_state_flags & RQSF_GOT_SENSE) {
PRINTF(" Skey: %x", XS_SNSKEY(xs));
if (!(XS_IS_SNS_VALID(xs))) {
PRINTF(" BUT NOT SET");
}
}
PRINTF(" XS_ERR=0x%x\n", (unsigned int) XS_ERR(xs));
}
if (isp->isp_nactive > 0)
isp->isp_nactive--;
complist[ndone++] = xs; /* defer completion call until later */
}
/*
* If we looked at any commands, then it's valid to find out
* what the outpointer is. It also is a trigger to update the
* ISP's notion of what we've seen so far.
*/
if (nlooked) {
ISP_WRITE(isp, INMAILBOX5, optr);
isp->isp_reqodx = ISP_READ(isp, OUTMAILBOX4);
}
isp->isp_residx = optr;
for (i = 0; i < ndone; i++) {
xs = complist[i];
if (xs) {
XS_CMD_DONE(xs);
}
}
ENABLE_INTS(isp);
return (1);
}
/*
* Support routines.
*/
static int
isp_parse_async(isp, mbox)
struct ispsoftc *isp;
int mbox;
{
int bus;
u_int32_t fast_post_handle = 0;
if (IS_DUALBUS(isp)) {
bus = ISP_READ(isp, OUTMAILBOX6);
} else {
bus = 0;
}
switch (mbox) {
case MBOX_COMMAND_COMPLETE: /* sometimes these show up */
break;
case ASYNC_BUS_RESET:
isp->isp_sendmarker = (1 << bus);
#ifdef ISP_TARGET_MODE
isp_target_async(isp, bus, mbox);
#endif
isp_async(isp, ISPASYNC_BUS_RESET, &bus);
break;
case ASYNC_SYSTEM_ERROR:
mbox = ISP_READ(isp, OUTMAILBOX1);
PRINTF("%s: Internal FW Error @ RISC Addr 0x%x\n",
isp->isp_name, mbox);
isp_restart(isp);
/* no point continuing after this */
return (-1);
case ASYNC_RQS_XFER_ERR:
PRINTF("%s: Request Queue Transfer Error\n", isp->isp_name);
break;
case ASYNC_RSP_XFER_ERR:
PRINTF("%s: Response Queue Transfer Error\n", isp->isp_name);
break;
case ASYNC_QWAKEUP:
/*
* We've just been notified that the Queue has woken up.
* We don't need to be chatty about this- just unlatch things
* and move on.
*/
mbox = ISP_READ(isp, OUTMAILBOX4);
break;
case ASYNC_TIMEOUT_RESET:
PRINTF("%s: timeout initiated SCSI bus reset of bus %d\n",
isp->isp_name, bus);
isp->isp_sendmarker = (1 << bus);
#ifdef ISP_TARGET_MODE
isp_target_async(isp, bus, mbox);
#endif
break;
case ASYNC_DEVICE_RESET:
PRINTF("%s: device reset on bus %d\n", isp->isp_name, bus);
isp->isp_sendmarker = 1 << bus;
#ifdef ISP_TARGET_MODE
isp_target_async(isp, bus, mbox);
#endif
break;
case ASYNC_EXTMSG_UNDERRUN:
PRINTF("%s: extended message underrun\n", isp->isp_name);
break;
case ASYNC_SCAM_INT:
PRINTF("%s: SCAM interrupt\n", isp->isp_name);
break;
case ASYNC_HUNG_SCSI:
PRINTF("%s: stalled SCSI Bus after DATA Overrun\n",
isp->isp_name);
/* XXX: Need to issue SCSI reset at this point */
break;
case ASYNC_KILLED_BUS:
PRINTF("%s: SCSI Bus reset after DATA Overrun\n",
isp->isp_name);
break;
case ASYNC_BUS_TRANSIT:
mbox = ISP_READ(isp, OUTMAILBOX2);
switch (mbox & 0x1c00) {
case SXP_PINS_LVD_MODE:
PRINTF("%s: Transition to LVD mode\n", isp->isp_name);
((sdparam *)isp->isp_param)->isp_diffmode = 0;
((sdparam *)isp->isp_param)->isp_ultramode = 0;
((sdparam *)isp->isp_param)->isp_lvdmode = 1;
break;
case SXP_PINS_HVD_MODE:
PRINTF("%s: Transition to Differential mode\n",
isp->isp_name);
((sdparam *)isp->isp_param)->isp_diffmode = 1;
((sdparam *)isp->isp_param)->isp_ultramode = 0;
((sdparam *)isp->isp_param)->isp_lvdmode = 0;
break;
case SXP_PINS_SE_MODE:
PRINTF("%s: Transition to Single Ended mode\n",
isp->isp_name);
((sdparam *)isp->isp_param)->isp_diffmode = 0;
((sdparam *)isp->isp_param)->isp_ultramode = 1;
((sdparam *)isp->isp_param)->isp_lvdmode = 0;
break;
default:
PRINTF("%s: Transition to unknown mode 0x%x\n",
isp->isp_name, mbox);
break;
}
/*
* XXX: Set up to renegotiate again!
*/
/* Can only be for a 1080... */
isp->isp_sendmarker = (1 << bus);
break;
case ASYNC_CMD_CMPLT:
fast_post_handle = (ISP_READ(isp, OUTMAILBOX2) << 16) |
ISP_READ(isp, OUTMAILBOX1);
IDPRINTF(4, ("%s: fast post completion of %u\n", isp->isp_name,
fast_post_handle));
break;
case ASYNC_CTIO_DONE:
/* Should only occur when Fast Posting Set for 2100s */
PRINTF("%s: CTIO done\n", isp->isp_name);
break;
case ASYNC_LIP_OCCURRED:
((fcparam *) isp->isp_param)->isp_lipseq =
ISP_READ(isp, OUTMAILBOX1);
((fcparam *) isp->isp_param)->isp_fwstate = FW_CONFIG_WAIT;
((fcparam *) isp->isp_param)->isp_loopstate = LOOP_LIP_RCVD;
isp->isp_sendmarker = 1;
isp_mark_getpdb_all(isp);
IDPRINTF(1, ("%s: LIP occurred\n", isp->isp_name));
#ifdef ISP_TARGET_MODE
isp_target_async(isp, bus, mbox);
#endif
break;
case ASYNC_LOOP_UP:
isp->isp_sendmarker = 1;
((fcparam *) isp->isp_param)->isp_fwstate = FW_CONFIG_WAIT;
((fcparam *) isp->isp_param)->isp_loopstate = LOOP_LIP_RCVD;
isp_mark_getpdb_all(isp);
isp_async(isp, ISPASYNC_LOOP_UP, NULL);
#ifdef ISP_TARGET_MODE
isp_target_async(isp, bus, mbox);
#endif
break;
case ASYNC_LOOP_DOWN:
isp->isp_sendmarker = 1;
((fcparam *) isp->isp_param)->isp_fwstate = FW_CONFIG_WAIT;
((fcparam *) isp->isp_param)->isp_loopstate = LOOP_NIL;
isp_mark_getpdb_all(isp);
isp_async(isp, ISPASYNC_LOOP_DOWN, NULL);
#ifdef ISP_TARGET_MODE
isp_target_async(isp, bus, mbox);
#endif
break;
case ASYNC_LOOP_RESET:
isp->isp_sendmarker = 1 << bus;
((fcparam *) isp->isp_param)->isp_fwstate = FW_CONFIG_WAIT;
((fcparam *) isp->isp_param)->isp_loopstate = LOOP_NIL;
isp_mark_getpdb_all(isp);
PRINTF("%s: Loop RESET\n", isp->isp_name);
#ifdef ISP_TARGET_MODE
isp_target_async(isp, bus, mbox);
#endif
break;
case ASYNC_PDB_CHANGED:
isp->isp_sendmarker = 1;
((fcparam *) isp->isp_param)->isp_loopstate = LOOP_PDB_RCVD;
isp_mark_getpdb_all(isp);
IDPRINTF(2, ("%s: Port Database Changed\n", isp->isp_name));
break;
case ASYNC_CHANGE_NOTIFY:
isp_mark_getpdb_all(isp);
/*
* Not correct, but it will force us to rescan the loop.
*/
((fcparam *) isp->isp_param)->isp_loopstate = LOOP_PDB_RCVD;
isp_async(isp, ISPASYNC_CHANGE_NOTIFY, NULL);
break;
case ASYNC_PTPMODE:
PRINTF("%s: Point-to-Point mode\n", isp->isp_name);
break;
case ASYNC_CONNMODE:
mbox = ISP_READ(isp, OUTMAILBOX1);
switch (mbox) {
case ISP_CONN_LOOP:
PRINTF("%s: Point-to-Point -> Loop mode\n",
isp->isp_name);
break;
case ISP_CONN_PTP:
PRINTF("%s: Loop -> Point-to-Point mode\n",
isp->isp_name);
break;
case ISP_CONN_BADLIP:
PRINTF("%s: Point-to-Point -> Loop mode (1)\n",
isp->isp_name);
break;
case ISP_CONN_FATAL:
PRINTF("%s: FATAL CONNECTION ERROR\n", isp->isp_name);
isp_restart(isp);
/* no point continuing after this */
return (-1);
case ISP_CONN_LOOPBACK:
PRINTF("%s: Looped Back in Point-to-Point mode\n",
isp->isp_name);
}
break;
default:
PRINTF("%s: unknown async code 0x%x\n", isp->isp_name, mbox);
break;
}
return (fast_post_handle);
}
/*
* Handle other response entries. A pointer to the request queue output
* index is here in case we want to eat several entries at once, although
* this is not used currently.
*/
static int
isp_handle_other_response(isp, sp, optrp)
struct ispsoftc *isp;
ispstatusreq_t *sp;
u_int16_t *optrp;
{
switch (sp->req_header.rqs_entry_type) {
case RQSTYPE_ATIO:
case RQSTYPE_CTIO:
case RQSTYPE_ENABLE_LUN:
case RQSTYPE_MODIFY_LUN:
case RQSTYPE_NOTIFY:
case RQSTYPE_NOTIFY_ACK:
case RQSTYPE_CTIO1:
case RQSTYPE_ATIO2:
case RQSTYPE_CTIO2:
case RQSTYPE_CTIO3:
#ifdef ISP_TARGET_MODE
return (isp_target_notify(isp, sp, optrp));
#else
/* FALLTHROUGH */
#endif
case RQSTYPE_REQUEST:
default:
PRINTF("%s: unhandled response type 0x%x\n", isp->isp_name,
sp->req_header.rqs_entry_type);
return (-1);
}
}
static void
isp_parse_status(isp, sp, xs)
struct ispsoftc *isp;
ispstatusreq_t *sp;
ISP_SCSI_XFER_T *xs;
{
switch (sp->req_completion_status) {
case RQCS_COMPLETE:
XS_SETERR(xs, HBA_NOERROR);
return;
case RQCS_INCOMPLETE:
if ((sp->req_state_flags & RQSF_GOT_TARGET) == 0) {
IDPRINTF(3, ("%s: Selection Timeout for %d.%d.%d\n",
isp->isp_name, XS_TGT(xs), XS_LUN(xs),
XS_CHANNEL(xs)));
XS_SETERR(xs, HBA_SELTIMEOUT);
return;
}
PRINTF("%s: command incomplete for %d.%d.%d, state 0x%x\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs),
sp->req_state_flags);
break;
case RQCS_DMA_ERROR:
PRINTF("%s: DMA error for command on %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_TRANSPORT_ERROR:
PRINTF("%s: transport error for %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
isp_prtstst(sp);
break;
case RQCS_RESET_OCCURRED:
IDPRINTF(1, ("%s: bus reset destroyed command for %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)));
isp->isp_sendmarker |= (1 << XS_CHANNEL(xs));
XS_SETERR(xs, HBA_BUSRESET);
return;
case RQCS_ABORTED:
PRINTF("%s: command aborted for %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
isp->isp_sendmarker |= (1 << XS_CHANNEL(xs));
XS_SETERR(xs, HBA_ABORTED);
return;
case RQCS_TIMEOUT:
IDPRINTF(2, ("%s: command timed out for %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs)));
XS_SETERR(xs, HBA_CMDTIMEOUT);
return;
case RQCS_DATA_OVERRUN:
if (IS_FC(isp)) {
XS_RESID(xs) = sp->req_resid;
break;
}
PRINTF("%s: data overrun for command on %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
XS_SETERR(xs, HBA_DATAOVR);
return;
case RQCS_COMMAND_OVERRUN:
PRINTF("%s: command overrun for command on %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_STATUS_OVERRUN:
PRINTF("%s: status overrun for command on %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_BAD_MESSAGE:
PRINTF("%s: msg not COMMAND COMPLETE after status %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_NO_MESSAGE_OUT:
PRINTF("%s: No MESSAGE OUT phase after selection on %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_EXT_ID_FAILED:
PRINTF("%s: EXTENDED IDENTIFY failed %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_IDE_MSG_FAILED:
PRINTF("%s: INITIATOR DETECTED ERROR rejected by %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_ABORT_MSG_FAILED:
PRINTF("%s: ABORT OPERATION rejected by %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_REJECT_MSG_FAILED:
PRINTF("%s: MESSAGE REJECT rejected by %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_NOP_MSG_FAILED:
PRINTF("%s: NOP rejected by %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_PARITY_ERROR_MSG_FAILED:
PRINTF("%s: MESSAGE PARITY ERROR rejected by %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_DEVICE_RESET_MSG_FAILED:
PRINTF("%s: BUS DEVICE RESET rejected by %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_ID_MSG_FAILED:
PRINTF("%s: IDENTIFY rejected by %d.%d.%d\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_UNEXP_BUS_FREE:
PRINTF("%s: %d.%d.%d had an unexpected bus free\n",
isp->isp_name, XS_CHANNEL(xs), XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_DATA_UNDERRUN:
if (IS_FC(isp)) {
XS_RESID(xs) = sp->req_resid;
}
XS_SETERR(xs, HBA_NOERROR);
return;
case RQCS_XACT_ERR1:
PRINTF("%s: HBA attempted queued transaction with disconnect "
"not set for %d.%d.%d\n", isp->isp_name, XS_CHANNEL(xs),
XS_TGT(xs), XS_LUN(xs));
break;
case RQCS_XACT_ERR2:
PRINTF("%s: HBA attempted queued transaction to target "
"routine %d on target %d, bus %d\n", isp->isp_name,
XS_LUN(xs), XS_TGT(xs), XS_CHANNEL(xs));
break;
case RQCS_XACT_ERR3:
PRINTF("%s: HBA attempted queued transaction for target %d lun "
"%d on bus %d when queueing disabled\n", isp->isp_name,
XS_TGT(xs), XS_LUN(xs), XS_CHANNEL(xs));
break;
case RQCS_BAD_ENTRY:
PRINTF("%s: invalid IOCB entry type detected\n", isp->isp_name);
break;
case RQCS_QUEUE_FULL:
IDPRINTF(3, ("%s: internal queues full for target %d lun %d "
"bus %d, status 0x%x\n", isp->isp_name, XS_TGT(xs),
XS_LUN(xs), XS_CHANNEL(xs), XS_STS(xs)));
/*
* If QFULL or some other status byte is set, then this
* isn't an error, per se.
*/
if (XS_STS(xs) != 0) {
XS_SETERR(xs, HBA_NOERROR);
return;
}
break;
case RQCS_PHASE_SKIPPED:
PRINTF("%s: SCSI phase skipped (e.g., COMMAND COMPLETE w/o "
"STATUS phase) for target %d lun %d bus %d\n",
isp->isp_name, XS_TGT(xs), XS_LUN(xs), XS_CHANNEL(xs));
break;
case RQCS_ARQS_FAILED:
PRINTF("%s: Auto Request Sense failed for %d.%d.%d\n",
isp->isp_name, XS_TGT(xs), XS_LUN(xs), XS_CHANNEL(xs));
return;
case RQCS_WIDE_FAILED:
PRINTF("%s: Wide Negotiation failed for %d.%d.%d\n",
isp->isp_name, XS_TGT(xs), XS_LUN(xs), XS_CHANNEL(xs));
if (IS_SCSI(isp)) {
sdparam *sdp = isp->isp_param;
sdp += XS_CHANNEL(xs);
sdp->isp_devparam[XS_TGT(xs)].dev_flags &= ~DPARM_WIDE;
sdp->isp_devparam[XS_TGT(xs)].dev_update = 1;
isp->isp_update |= (1 << XS_CHANNEL(xs));
}
XS_SETERR(xs, HBA_NOERROR);
return;
case RQCS_SYNCXFER_FAILED:
PRINTF("%s: SDTR Message failed for target %d.%d.%d\n",
isp->isp_name, XS_TGT(xs), XS_LUN(xs), XS_CHANNEL(xs));
if (IS_SCSI(isp)) {
sdparam *sdp = isp->isp_param;
sdp += XS_CHANNEL(xs);
sdp->isp_devparam[XS_TGT(xs)].dev_flags &= ~DPARM_SYNC;
sdp->isp_devparam[XS_TGT(xs)].dev_update = 1;
isp->isp_update |= (1 << XS_CHANNEL(xs));
}
break;
case RQCS_LVD_BUSERR:
PRINTF("%s: Bad LVD condition while talking to %d.%d.%d\n",
isp->isp_name, XS_TGT(xs), XS_LUN(xs), XS_CHANNEL(xs));
break;
case RQCS_PORT_UNAVAILABLE:
/*
* No such port on the loop. Moral equivalent of SELTIMEO
*/
IDPRINTF(3, ("%s: Port Unavailable for target %d\n",
isp->isp_name, XS_TGT(xs)));
XS_SETERR(xs, HBA_SELTIMEOUT);
return;
case RQCS_PORT_LOGGED_OUT:
/*
* It was there (maybe)- treat as a selection timeout.
*/
IDPRINTF(2, ("%s: port logout for target %d\n",
isp->isp_name, XS_TGT(xs)));
XS_SETERR(xs, HBA_SELTIMEOUT);
return;
case RQCS_PORT_CHANGED:
PRINTF("%s: port changed for target %d\n",
isp->isp_name, XS_TGT(xs));
XS_SETERR(xs, HBA_SELTIMEOUT);
return;
case RQCS_PORT_BUSY:
PRINTF("%s: port busy for target %d\n",
isp->isp_name, XS_TGT(xs));
XS_SETERR(xs, HBA_TGTBSY);
return;
default:
PRINTF("%s: completion status 0x%x\n",
isp->isp_name, sp->req_completion_status);
break;
}
XS_SETERR(xs, HBA_BOTCH);
}
static void
isp_fastpost_complete(isp, fph)
struct ispsoftc *isp;
u_int32_t fph;
{
ISP_SCSI_XFER_T *xs;
if (fph < 1) {
return;
}
xs = isp_find_xs(isp, fph);
if (xs == NULL) {
PRINTF("%s: command for fast posting handle 0x%x not found\n",
isp->isp_name, fph);
return;
}
isp_destroy_handle(isp, fph);
/*
* Since we don't have a result queue entry item,
* we must believe that SCSI status is zero and
* that all data transferred.
*/
XS_RESID(xs) = 0;
XS_STS(xs) = 0;
if (XS_XFRLEN(xs)) {
ISP_DMAFREE(isp, xs, fph);
}
XS_CMD_DONE(xs);
if (isp->isp_nactive)
isp->isp_nactive--;
}
#define HINIB(x) ((x) >> 0x4)
#define LONIB(x) ((x) & 0xf)
#define MAKNIB(a, b) (((a) << 4) | (b))
static u_int8_t mbpcnt[] = {
MAKNIB(1, 1), /* 0x00: MBOX_NO_OP */
MAKNIB(5, 5), /* 0x01: MBOX_LOAD_RAM */
MAKNIB(2, 0), /* 0x02: MBOX_EXEC_FIRMWARE */
MAKNIB(5, 5), /* 0x03: MBOX_DUMP_RAM */
MAKNIB(3, 3), /* 0x04: MBOX_WRITE_RAM_WORD */
MAKNIB(2, 3), /* 0x05: MBOX_READ_RAM_WORD */
MAKNIB(6, 6), /* 0x06: MBOX_MAILBOX_REG_TEST */
MAKNIB(2, 3), /* 0x07: MBOX_VERIFY_CHECKSUM */
MAKNIB(1, 4), /* 0x08: MBOX_ABOUT_FIRMWARE */
MAKNIB(0, 0), /* 0x09: */
MAKNIB(0, 0), /* 0x0a: */
MAKNIB(0, 0), /* 0x0b: */
MAKNIB(0, 0), /* 0x0c: */
MAKNIB(0, 0), /* 0x0d: */
MAKNIB(1, 2), /* 0x0e: MBOX_CHECK_FIRMWARE */
MAKNIB(0, 0), /* 0x0f: */
MAKNIB(5, 5), /* 0x10: MBOX_INIT_REQ_QUEUE */
MAKNIB(6, 6), /* 0x11: MBOX_INIT_RES_QUEUE */
MAKNIB(4, 4), /* 0x12: MBOX_EXECUTE_IOCB */
MAKNIB(2, 2), /* 0x13: MBOX_WAKE_UP */
MAKNIB(1, 6), /* 0x14: MBOX_STOP_FIRMWARE */
MAKNIB(4, 4), /* 0x15: MBOX_ABORT */
MAKNIB(2, 2), /* 0x16: MBOX_ABORT_DEVICE */
MAKNIB(3, 3), /* 0x17: MBOX_ABORT_TARGET */
MAKNIB(3, 1), /* 0x18: MBOX_BUS_RESET */
MAKNIB(2, 3), /* 0x19: MBOX_STOP_QUEUE */
MAKNIB(2, 3), /* 0x1a: MBOX_START_QUEUE */
MAKNIB(2, 3), /* 0x1b: MBOX_SINGLE_STEP_QUEUE */
MAKNIB(2, 3), /* 0x1c: MBOX_ABORT_QUEUE */
MAKNIB(2, 4), /* 0x1d: MBOX_GET_DEV_QUEUE_STATUS */
MAKNIB(0, 0), /* 0x1e: */
MAKNIB(1, 3), /* 0x1f: MBOX_GET_FIRMWARE_STATUS */
MAKNIB(1, 4), /* 0x20: MBOX_GET_INIT_SCSI_ID, MBOX_GET_LOOP_ID */
MAKNIB(1, 3), /* 0x21: MBOX_GET_SELECT_TIMEOUT */
MAKNIB(1, 3), /* 0x22: MBOX_GET_RETRY_COUNT */
MAKNIB(1, 2), /* 0x23: MBOX_GET_TAG_AGE_LIMIT */
MAKNIB(1, 2), /* 0x24: MBOX_GET_CLOCK_RATE */
MAKNIB(1, 2), /* 0x25: MBOX_GET_ACT_NEG_STATE */
MAKNIB(1, 2), /* 0x26: MBOX_GET_ASYNC_DATA_SETUP_TIME */
MAKNIB(1, 3), /* 0x27: MBOX_GET_PCI_PARAMS */
MAKNIB(2, 4), /* 0x28: MBOX_GET_TARGET_PARAMS */
MAKNIB(2, 4), /* 0x29: MBOX_GET_DEV_QUEUE_PARAMS */
MAKNIB(1, 2), /* 0x2a: MBOX_GET_RESET_DELAY_PARAMS */
MAKNIB(0, 0), /* 0x2b: */
MAKNIB(0, 0), /* 0x2c: */
MAKNIB(0, 0), /* 0x2d: */
MAKNIB(0, 0), /* 0x2e: */
MAKNIB(0, 0), /* 0x2f: */
MAKNIB(2, 2), /* 0x30: MBOX_SET_INIT_SCSI_ID */
MAKNIB(2, 3), /* 0x31: MBOX_SET_SELECT_TIMEOUT */
MAKNIB(3, 3), /* 0x32: MBOX_SET_RETRY_COUNT */
MAKNIB(2, 2), /* 0x33: MBOX_SET_TAG_AGE_LIMIT */
MAKNIB(2, 2), /* 0x34: MBOX_SET_CLOCK_RATE */
MAKNIB(2, 2), /* 0x35: MBOX_SET_ACT_NEG_STATE */
MAKNIB(2, 2), /* 0x36: MBOX_SET_ASYNC_DATA_SETUP_TIME */
MAKNIB(3, 3), /* 0x37: MBOX_SET_PCI_CONTROL_PARAMS */
MAKNIB(4, 4), /* 0x38: MBOX_SET_TARGET_PARAMS */
MAKNIB(4, 4), /* 0x39: MBOX_SET_DEV_QUEUE_PARAMS */
MAKNIB(1, 2), /* 0x3a: MBOX_SET_RESET_DELAY_PARAMS */
MAKNIB(0, 0), /* 0x3b: */
MAKNIB(0, 0), /* 0x3c: */
MAKNIB(0, 0), /* 0x3d: */
MAKNIB(0, 0), /* 0x3e: */
MAKNIB(0, 0), /* 0x3f: */
MAKNIB(1, 2), /* 0x40: MBOX_RETURN_BIOS_BLOCK_ADDR */
MAKNIB(6, 1), /* 0x41: MBOX_WRITE_FOUR_RAM_WORDS */
MAKNIB(2, 3), /* 0x42: MBOX_EXEC_BIOS_IOCB */
MAKNIB(0, 0), /* 0x43: */
MAKNIB(0, 0), /* 0x44: */
MAKNIB(0, 0), /* 0x45: */
MAKNIB(0, 0), /* 0x46: */
MAKNIB(0, 0), /* 0x47: */
MAKNIB(0, 0), /* 0x48: */
MAKNIB(0, 0), /* 0x49: */
MAKNIB(2, 1), /* 0x4a: MBOX_SET_FIRMWARE_FEATURES */
MAKNIB(1, 2), /* 0x4b: MBOX_GET_FIRMWARE_FEATURES */
MAKNIB(0, 0), /* 0x4c: */
MAKNIB(0, 0), /* 0x4d: */
MAKNIB(0, 0), /* 0x4e: */
MAKNIB(0, 0), /* 0x4f: */
MAKNIB(0, 0), /* 0x50: */
MAKNIB(0, 0), /* 0x51: */
MAKNIB(0, 0), /* 0x52: */
MAKNIB(0, 0), /* 0x53: */
MAKNIB(8, 0), /* 0x54: MBOX_EXEC_COMMAND_IOCB_A64 */
MAKNIB(2, 1), /* 0x55: MBOX_ENABLE_TARGET_MODE */
MAKNIB(0, 0), /* 0x56: */
MAKNIB(0, 0), /* 0x57: */
MAKNIB(0, 0), /* 0x58: */
MAKNIB(0, 0), /* 0x59: */
MAKNIB(0, 0), /* 0x5a: */
MAKNIB(0, 0), /* 0x5b: */
MAKNIB(0, 0), /* 0x5c: */
MAKNIB(0, 0), /* 0x5d: */
MAKNIB(0, 0), /* 0x5e: */
MAKNIB(0, 0), /* 0x5f: */
MAKNIB(8, 6), /* 0x60: MBOX_INIT_FIRMWARE */
MAKNIB(0, 0), /* 0x61: */
MAKNIB(2, 1), /* 0x62: MBOX_INIT_LIP */
MAKNIB(8, 1), /* 0x63: MBOX_GET_FC_AL_POSITION_MAP */
MAKNIB(8, 1), /* 0x64: MBOX_GET_PORT_DB */
MAKNIB(3, 1), /* 0x65: MBOX_CLEAR_ACA */
MAKNIB(3, 1), /* 0x66: MBOX_TARGET_RESET */
MAKNIB(3, 1), /* 0x67: MBOX_CLEAR_TASK_SET */
MAKNIB(3, 1), /* 0x68: MBOX_ABORT_TASK_SET */
MAKNIB(1, 2), /* 0x69: MBOX_GET_FW_STATE */
MAKNIB(2, 8), /* 0x6a: MBOX_GET_PORT_NAME */
MAKNIB(8, 1), /* 0x6b: MBOX_GET_LINK_STATUS */
MAKNIB(4, 4), /* 0x6c: MBOX_INIT_LIP_RESET */
MAKNIB(0, 0), /* 0x6d: */
MAKNIB(8, 2), /* 0x6e: MBOX_SEND_SNS */
MAKNIB(4, 3), /* 0x6f: MBOX_FABRIC_LOGIN */
MAKNIB(2, 1), /* 0x70: MBOX_SEND_CHANGE_REQUEST */
MAKNIB(2, 1), /* 0x71: MBOX_FABRIC_LOGOUT */
MAKNIB(4, 1) /* 0x72: MBOX_INIT_LIP_LOGIN */
};
#define NMBCOM (sizeof (mbpcnt) / sizeof (mbpcnt[0]))
static void
isp_mboxcmd(isp, mbp)
struct ispsoftc *isp;
mbreg_t *mbp;
{
int outparam, inparam;
int loops, dld = 0;
u_int8_t opcode;
if (mbp->param[0] == ISP2100_SET_PCI_PARAM) {
opcode = mbp->param[0] = MBOX_SET_PCI_PARAMETERS;
inparam = 4;
outparam = 4;
goto command_known;
} else if (mbp->param[0] > NMBCOM) {
PRINTF("%s: bad command %x\n", isp->isp_name, mbp->param[0]);
return;
}
opcode = mbp->param[0];
inparam = HINIB(mbpcnt[mbp->param[0]]);
outparam = LONIB(mbpcnt[mbp->param[0]]);
if (inparam == 0 && outparam == 0) {
PRINTF("%s: no parameters for %x\n", isp->isp_name,
mbp->param[0]);
return;
}
/*
* Check for variants
*/
#ifdef ISP2100_SCCLUN
if (IS_FC(isp)) {
switch (mbp->param[0]) {
case MBOX_ABORT:
inparam = 7;
break;
case MBOX_ABORT_DEVICE:
case MBOX_START_QUEUE:
case MBOX_STOP_QUEUE:
case MBOX_SINGLE_STEP_QUEUE:
case MBOX_ABORT_QUEUE:
case MBOX_GET_DEV_QUEUE_STATUS:
inparam = 3;
break;
case MBOX_BUS_RESET:
inparam = 2;
break;
default:
break;
}
}
#endif
command_known:
/*
* Set semaphore on mailbox registers to win any races to acquire them.
*/
ISP_WRITE(isp, BIU_SEMA, 1);
/*
* Qlogic Errata for the ISP2100 says that there is a necessary
* debounce between between writing the semaphore register
* and reading a mailbox register. I believe we're okay here.
*/
/*
* Make sure we can send some words.
* Check to see if there's an async mbox event pending.
*/
loops = MBOX_DELAY_COUNT;
while ((ISP_READ(isp, HCCR) & HCCR_HOST_INT) != 0) {
if (ISP_READ(isp, BIU_SEMA) & 1) {
int fph;
u_int16_t mbox = ISP_READ(isp, OUTMAILBOX0);
/*
* We have a pending MBOX async event.
*/
if (mbox & 0x8000) {
fph = isp_parse_async(isp, (int) mbox);
IDPRINTF(5, ("%s: line %d, fph %d\n",
isp->isp_name, __LINE__, fph));
ISP_WRITE(isp, BIU_SEMA, 0);
ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT);
if (fph < 0) {
return;
} else if (fph > 0) {
isp_fastpost_complete(isp, fph);
}
SYS_DELAY(100);
goto command_known;
}
/*
* We have a pending MBOX completion? Might be
* from a previous command. We can't (sometimes)
* just clear HOST INTERRUPT, so we'll just silently
* eat this here.
*/
if (mbox & 0x4000) {
IDPRINTF(5, ("%s: line %d, mbox 0x%x\n",
isp->isp_name, __LINE__, mbox));
ISP_WRITE(isp, BIU_SEMA, 0);
ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT);
SYS_DELAY(100);
goto command_known;
}
}
SYS_DELAY(100);
if (--loops < 0) {
if (dld++ > 10) {
PRINTF("%s: isp_mboxcmd could not get command "
"started\n", isp->isp_name);
return;
}
ISP_WRITE(isp, BIU_SEMA, 0);
ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT);
goto command_known;
}
}
/*
* Write input parameters.
*
* Special case some of the setups for the dual port SCSI cards.
* XXX Eventually will be fixed by converting register write/read
* XXX counts to bitmasks.
*/
if (IS_DUALBUS(isp)) {
switch (opcode) {
case MBOX_GET_RETRY_COUNT:
case MBOX_SET_RETRY_COUNT:
ISP_WRITE(isp, INMAILBOX7, mbp->param[7]);
mbp->param[7] = 0;
ISP_WRITE(isp, INMAILBOX6, mbp->param[6]);
mbp->param[6] = 0;
break;
case MBOX_SET_ASYNC_DATA_SETUP_TIME:
case MBOX_SET_ACT_NEG_STATE:
case MBOX_SET_TAG_AGE_LIMIT:
case MBOX_SET_SELECT_TIMEOUT:
ISP_WRITE(isp, INMAILBOX2, mbp->param[2]);
mbp->param[2] = 0;
break;
}
}
switch (inparam) {
case 8: ISP_WRITE(isp, INMAILBOX7, mbp->param[7]); mbp->param[7] = 0;
case 7: ISP_WRITE(isp, INMAILBOX6, mbp->param[6]); mbp->param[6] = 0;
case 6:
/*
* The Qlogic 2100 cannot have registers 4 and 5 written to
* after initialization or BAD THINGS HAPPEN (tm).
*/
if (IS_SCSI(isp) || mbp->param[0] == MBOX_INIT_FIRMWARE)
ISP_WRITE(isp, INMAILBOX5, mbp->param[5]);
mbp->param[5] = 0;
case 5:
if (IS_SCSI(isp) || mbp->param[0] == MBOX_INIT_FIRMWARE)
ISP_WRITE(isp, INMAILBOX4, mbp->param[4]);
mbp->param[4] = 0;
case 4: ISP_WRITE(isp, INMAILBOX3, mbp->param[3]); mbp->param[3] = 0;
case 3: ISP_WRITE(isp, INMAILBOX2, mbp->param[2]); mbp->param[2] = 0;
case 2: ISP_WRITE(isp, INMAILBOX1, mbp->param[1]); mbp->param[1] = 0;
case 1: ISP_WRITE(isp, INMAILBOX0, mbp->param[0]); mbp->param[0] = 0;
}
/*
* Clear RISC int condition.
*/
ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT);
/*
* Clear semaphore on mailbox registers so that the Qlogic
* may update outgoing registers.
*/
ISP_WRITE(isp, BIU_SEMA, 0);
/*
* Set Host Interrupt condition so that RISC will pick up mailbox regs.
*/
ISP_WRITE(isp, HCCR, HCCR_CMD_SET_HOST_INT);
/*
* Wait until HOST INT has gone away (meaning that the Qlogic
* has picked up the mailbox command. Wait a long time.
*/
loops = MBOX_DELAY_COUNT * 5;
while ((ISP_READ(isp, HCCR) & HCCR_CMD_CLEAR_RISC_INT) != 0) {
SYS_DELAY(100);
if (--loops < 0) {
PRINTF("%s: isp_mboxcmd timeout #2\n", isp->isp_name);
return;
}
}
/*
* While the Semaphore registers isn't set, wait for the Qlogic
* to process the mailbox command. Again- wait a long time.
*/
loops = MBOX_DELAY_COUNT * 5;
while ((ISP_READ(isp, BIU_SEMA) & 1) == 0) {
SYS_DELAY(100);
/*
* Wierd- I've seen the case where the semaphore register
* isn't getting set- sort of a violation of the protocol..
*/
if (ISP_READ(isp, OUTMAILBOX0) & 0x4000)
break;
if (--loops < 0) {
PRINTF("%s: isp_mboxcmd timeout #3\n", isp->isp_name);
return;
}
}
/*
* Make sure that the MBOX_BUSY has gone away
*/
loops = MBOX_DELAY_COUNT;
for (;;) {
u_int16_t mbox = ISP_READ(isp, OUTMAILBOX0);
if (mbox == MBOX_BUSY) {
if (--loops < 0) {
PRINTF("%s: isp_mboxcmd timeout #4\n",
isp->isp_name);
return;
}
SYS_DELAY(100);
continue;
}
/*
* We have a pending MBOX async event.
*/
if (mbox & 0x8000) {
int fph = isp_parse_async(isp, (int) mbox);
ISP_WRITE(isp, BIU_SEMA, 0);
ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT);
if (fph < 0) {
return;
} else if (fph > 0) {
isp_fastpost_complete(isp, fph);
}
SYS_DELAY(100);
continue;
}
break;
}
/*
* Pick up output parameters. Special case some of the readbacks
* for the dual port SCSI cards.
*/
if (IS_DUALBUS(isp)) {
switch (opcode) {
case MBOX_GET_RETRY_COUNT:
case MBOX_SET_RETRY_COUNT:
mbp->param[7] = ISP_READ(isp, OUTMAILBOX7);
mbp->param[6] = ISP_READ(isp, OUTMAILBOX6);
break;
case MBOX_GET_TAG_AGE_LIMIT:
case MBOX_SET_TAG_AGE_LIMIT:
case MBOX_GET_ACT_NEG_STATE:
case MBOX_SET_ACT_NEG_STATE:
case MBOX_SET_ASYNC_DATA_SETUP_TIME:
case MBOX_GET_ASYNC_DATA_SETUP_TIME:
case MBOX_GET_RESET_DELAY_PARAMS:
case MBOX_SET_RESET_DELAY_PARAMS:
mbp->param[2] = ISP_READ(isp, OUTMAILBOX2);
break;
}
}
if (IS_2200(isp)) {
if (opcode == MBOX_GET_LOOP_ID) {
mbp->param[6] = ISP_READ(isp, OUTMAILBOX6);
}
}
switch (outparam) {
case 8: mbp->param[7] = ISP_READ(isp, OUTMAILBOX7);
case 7: mbp->param[6] = ISP_READ(isp, OUTMAILBOX6);
case 6: mbp->param[5] = ISP_READ(isp, OUTMAILBOX5);
case 5: mbp->param[4] = ISP_READ(isp, OUTMAILBOX4);
case 4: mbp->param[3] = ISP_READ(isp, OUTMAILBOX3);
case 3: mbp->param[2] = ISP_READ(isp, OUTMAILBOX2);
case 2: mbp->param[1] = ISP_READ(isp, OUTMAILBOX1);
case 1: mbp->param[0] = ISP_READ(isp, OUTMAILBOX0);
}
/*
* Clear RISC int.
*/
ISP_WRITE(isp, HCCR, HCCR_CMD_CLEAR_RISC_INT);
/*
* Release semaphore on mailbox registers
*/
ISP_WRITE(isp, BIU_SEMA, 0);
/*
* Just to be chatty here...
*/
switch (mbp->param[0]) {
case MBOX_COMMAND_COMPLETE:
break;
case MBOX_INVALID_COMMAND:
IDPRINTF(2, ("%s: mbox cmd %x failed with INVALID_COMMAND\n",
isp->isp_name, opcode));
break;
case MBOX_HOST_INTERFACE_ERROR:
PRINTF("%s: mbox cmd %x failed with HOST_INTERFACE_ERROR\n",
isp->isp_name, opcode);
break;
case MBOX_TEST_FAILED:
PRINTF("%s: mbox cmd %x failed with TEST_FAILED\n",
isp->isp_name, opcode);
break;
case MBOX_COMMAND_ERROR:
if (opcode != MBOX_ABOUT_FIRMWARE)
PRINTF("%s: mbox cmd %x failed with COMMAND_ERROR\n",
isp->isp_name, opcode);
break;
case MBOX_COMMAND_PARAM_ERROR:
switch (opcode) {
case MBOX_GET_PORT_DB:
case MBOX_GET_PORT_NAME:
case MBOX_GET_DEV_QUEUE_PARAMS:
break;
default:
PRINTF("%s: mbox cmd %x failed with "
"COMMAND_PARAM_ERROR\n", isp->isp_name, opcode);
}
break;
case MBOX_LOOP_ID_USED:
case MBOX_PORT_ID_USED:
case MBOX_ALL_IDS_USED:
break;
/*
* Be silent about these...
*/
case ASYNC_PDB_CHANGED:
((fcparam *) isp->isp_param)->isp_loopstate = LOOP_PDB_RCVD;
break;
case ASYNC_LIP_OCCURRED:
((fcparam *) isp->isp_param)->isp_lipseq = mbp->param[1];
/* FALLTHROUGH */
case ASYNC_LOOP_UP:
((fcparam *) isp->isp_param)->isp_fwstate = FW_CONFIG_WAIT;
((fcparam *) isp->isp_param)->isp_loopstate = LOOP_LIP_RCVD;
break;
case ASYNC_LOOP_DOWN:
case ASYNC_LOOP_RESET:
((fcparam *) isp->isp_param)->isp_fwstate = FW_CONFIG_WAIT;
((fcparam *) isp->isp_param)->isp_loopstate = LOOP_NIL;
/* FALLTHROUGH */
case ASYNC_CHANGE_NOTIFY:
break;
default:
/*
* The expected return of EXEC_FIRMWARE is zero.
*/
if ((opcode == MBOX_EXEC_FIRMWARE && mbp->param[0] != 0) ||
(opcode != MBOX_EXEC_FIRMWARE)) {
PRINTF("%s: mbox cmd %x failed with error %x\n",
isp->isp_name, opcode, mbp->param[0]);
}
break;
}
}
void
isp_lostcmd(isp, xs)
struct ispsoftc *isp;
ISP_SCSI_XFER_T *xs;
{
mbreg_t mbs;
mbs.param[0] = MBOX_GET_FIRMWARE_STATUS;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
isp_dumpregs(isp, "couldn't GET FIRMWARE STATUS");
return;
}
if (mbs.param[1]) {
PRINTF("%s: %d commands on completion queue\n",
isp->isp_name, mbs.param[1]);
}
if (XS_NULL(xs))
return;
mbs.param[0] = MBOX_GET_DEV_QUEUE_STATUS;
mbs.param[1] = (XS_TGT(xs) << 8) | XS_LUN(xs); /* XXX: WHICH BUS? */
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
isp_dumpregs(isp, "couldn't GET DEVICE QUEUE STATUS");
return;
}
PRINTF("%s: lost command for target %d lun %d, %d active of %d, "
"Queue State: %x\n", isp->isp_name, XS_TGT(xs),
XS_LUN(xs), mbs.param[2], mbs.param[3], mbs.param[1]);
isp_dumpregs(isp, "lost command");
/*
* XXX: Need to try and do something to recover.
*/
}
static void
isp_dumpregs(isp, msg)
struct ispsoftc *isp;
const char *msg;
{
PRINTF("%s: %s\n", isp->isp_name, msg);
if (IS_SCSI(isp))
PRINTF(" biu_conf1=%x", ISP_READ(isp, BIU_CONF1));
else
PRINTF(" biu_csr=%x", ISP_READ(isp, BIU2100_CSR));
PRINTF(" biu_icr=%x biu_isr=%x biu_sema=%x ", ISP_READ(isp, BIU_ICR),
ISP_READ(isp, BIU_ISR), ISP_READ(isp, BIU_SEMA));
PRINTF("risc_hccr=%x\n", ISP_READ(isp, HCCR));
if (IS_SCSI(isp)) {
ISP_WRITE(isp, HCCR, HCCR_CMD_PAUSE);
PRINTF(" cdma_conf=%x cdma_sts=%x cdma_fifostat=%x\n",
ISP_READ(isp, CDMA_CONF), ISP_READ(isp, CDMA_STATUS),
ISP_READ(isp, CDMA_FIFO_STS));
PRINTF(" ddma_conf=%x ddma_sts=%x ddma_fifostat=%x\n",
ISP_READ(isp, DDMA_CONF), ISP_READ(isp, DDMA_STATUS),
ISP_READ(isp, DDMA_FIFO_STS));
PRINTF(" sxp_int=%x sxp_gross=%x sxp(scsi_ctrl)=%x\n",
ISP_READ(isp, SXP_INTERRUPT),
ISP_READ(isp, SXP_GROSS_ERR),
ISP_READ(isp, SXP_PINS_CTRL));
ISP_WRITE(isp, HCCR, HCCR_CMD_RELEASE);
}
PRINTF(" mbox regs: %x %x %x %x %x\n",
ISP_READ(isp, OUTMAILBOX0), ISP_READ(isp, OUTMAILBOX1),
ISP_READ(isp, OUTMAILBOX2), ISP_READ(isp, OUTMAILBOX3),
ISP_READ(isp, OUTMAILBOX4));
ISP_DUMPREGS(isp);
}
static void
isp_fw_state(isp)
struct ispsoftc *isp;
{
mbreg_t mbs;
if (IS_FC(isp)) {
int once = 0;
fcparam *fcp = isp->isp_param;
again:
mbs.param[0] = MBOX_GET_FW_STATE;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
IDPRINTF(1, ("%s: isp_fw_state 0x%x\n", isp->isp_name,
mbs.param[0]));
switch (mbs.param[0]) {
case ASYNC_PDB_CHANGED:
if (once++ < 10) {
goto again;
}
fcp->isp_fwstate = FW_CONFIG_WAIT;
fcp->isp_loopstate = LOOP_PDB_RCVD;
goto again;
case ASYNC_LIP_OCCURRED:
fcp->isp_lipseq = mbs.param[1];
/* FALLTHROUGH */
case ASYNC_LOOP_UP:
fcp->isp_fwstate = FW_CONFIG_WAIT;
fcp->isp_loopstate = LOOP_LIP_RCVD;
if (once++ < 10) {
goto again;
}
break;
case ASYNC_LOOP_RESET:
case ASYNC_LOOP_DOWN:
fcp->isp_fwstate = FW_CONFIG_WAIT;
fcp->isp_loopstate = LOOP_NIL;
/* FALLTHROUGH */
case ASYNC_CHANGE_NOTIFY:
if (once++ < 10) {
goto again;
}
break;
}
PRINTF("%s: GET FIRMWARE STATE failed (0x%x)\n",
isp->isp_name, mbs.param[0]);
return;
}
fcp->isp_fwstate = mbs.param[1];
}
}
static void
isp_update(isp)
struct ispsoftc *isp;
{
int bus;
for (bus = 0; isp->isp_update != 0; bus++) {
if (isp->isp_update & (1 << bus)) {
isp_update_bus(isp, bus);
isp->isp_update ^= (1 << bus);
}
}
}
static void
isp_update_bus(isp, bus)
struct ispsoftc *isp;
int bus;
{
int tgt;
mbreg_t mbs;
sdparam *sdp;
if (IS_FC(isp)) {
return;
}
sdp = isp->isp_param;
sdp += bus;
for (tgt = 0; tgt < MAX_TARGETS; tgt++) {
u_int16_t flags, period, offset;
int get;
if (sdp->isp_devparam[tgt].dev_enable == 0) {
IDPRINTF(1, ("%s: skipping target %d bus %d update\n",
isp->isp_name, tgt, bus));
continue;
}
/*
* If the goal is to update the status of the device,
* take what's in dev_flags and try and set the device
* toward that. Otherwise, if we're just refreshing the
* current device state, get the current parameters.
*/
if (sdp->isp_devparam[tgt].dev_update) {
mbs.param[0] = MBOX_SET_TARGET_PARAMS;
mbs.param[2] = sdp->isp_devparam[tgt].dev_flags;
/*
* Insist that PARITY must be enabled if SYNC
* is enabled.
*/
if (mbs.param[2] & DPARM_SYNC) {
mbs.param[2] |= DPARM_PARITY;
}
mbs.param[3] =
(sdp->isp_devparam[tgt].sync_offset << 8) |
(sdp->isp_devparam[tgt].sync_period);
sdp->isp_devparam[tgt].dev_update = 0;
/*
* A command completion later that has
* RQSTF_NEGOTIATION set will cause
* the dev_refresh/announce cycle.
*
* Note: It is really important to update our current
* flags with at least the state of TAG capabilities-
* otherwise we might try and send a tagged command
* when we have it all turned off. So change it here
* to say that current already matches goal.
*/
sdp->isp_devparam[tgt].cur_dflags &= ~DPARM_TQING;
sdp->isp_devparam[tgt].cur_dflags |=
(sdp->isp_devparam[tgt].dev_flags & DPARM_TQING);
sdp->isp_devparam[tgt].dev_refresh = 1;
IDPRINTF(3, ("%s: bus %d set tgt %d flags 0x%x off 0x%x"
" period 0x%x\n", isp->isp_name, bus, tgt,
mbs.param[2], mbs.param[3] >> 8,
mbs.param[3] & 0xff));
get = 0;
} else if (sdp->isp_devparam[tgt].dev_refresh) {
mbs.param[0] = MBOX_GET_TARGET_PARAMS;
sdp->isp_devparam[tgt].dev_refresh = 0;
get = 1;
} else {
continue;
}
mbs.param[1] = (bus << 15) | (tgt << 8) ;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
PRINTF("%s: failed to %cet SCSI parameters for "
"target %d\n", isp->isp_name, (get)? 'g' : 's',
tgt);
continue;
}
if (get == 0) {
isp->isp_sendmarker |= (1 << bus);
continue;
}
flags = mbs.param[2];
period = mbs.param[3] & 0xff;
offset = mbs.param[3] >> 8;
sdp->isp_devparam[tgt].cur_dflags = flags;
sdp->isp_devparam[tgt].cur_period = period;
sdp->isp_devparam[tgt].cur_offset = offset;
get = (bus << 16) | tgt;
(void) isp_async(isp, ISPASYNC_NEW_TGT_PARAMS, &get);
}
}
static void
isp_setdfltparm(isp, channel)
struct ispsoftc *isp;
int channel;
{
int tgt;
mbreg_t mbs;
sdparam *sdp;
if (IS_FC(isp)) {
fcparam *fcp = (fcparam *) isp->isp_param;
fcp += channel;
if (fcp->isp_gotdparms) {
return;
}
fcp->isp_gotdparms = 1;
fcp->isp_maxfrmlen = ICB_DFLT_FRMLEN;
fcp->isp_maxalloc = ICB_DFLT_ALLOC;
fcp->isp_execthrottle = ICB_DFLT_THROTTLE;
fcp->isp_retry_delay = ICB_DFLT_RDELAY;
fcp->isp_retry_count = ICB_DFLT_RCOUNT;
/* Platform specific.... */
fcp->isp_loopid = DEFAULT_LOOPID(isp);
fcp->isp_nodewwn = DEFAULT_WWN(isp);
fcp->isp_portwwn = 0;
/*
* Now try and read NVRAM
*/
if ((isp->isp_confopts & (ISP_CFG_NONVRAM|ISP_CFG_OWNWWN)) ||
(isp_read_nvram(isp))) {
PRINTF("%s: using Node WWN 0x%08x%08x\n",
isp->isp_name, (u_int32_t)(fcp->isp_nodewwn >> 32),
(u_int32_t)(fcp->isp_nodewwn & 0xffffffff));
}
return;
}
sdp = (sdparam *) isp->isp_param;
sdp += channel;
/*
* Been there, done that, got the T-shirt...
*/
if (sdp->isp_gotdparms) {
return;
}
sdp->isp_gotdparms = 1;
/*
* If we've not been told to avoid reading NVRAM, try and read it.
* If we're successful reading it, we can return since NVRAM will
* tell us the right thing to do. Otherwise, establish some reasonable
* defaults.
*/
if ((isp->isp_confopts & ISP_CFG_NONVRAM) == 0) {
if (isp_read_nvram(isp) == 0) {
return;
}
}
/*
* Now try and see whether we have specific values for them.
*/
if ((isp->isp_confopts & ISP_CFG_NONVRAM) == 0) {
mbs.param[0] = MBOX_GET_ACT_NEG_STATE;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
IDPRINTF(2, ("could not GET ACT NEG STATE\n"));
sdp->isp_req_ack_active_neg = 1;
sdp->isp_data_line_active_neg = 1;
} else {
sdp->isp_req_ack_active_neg =
(mbs.param[1+channel] >> 4) & 0x1;
sdp->isp_data_line_active_neg =
(mbs.param[1+channel] >> 5) & 0x1;
}
} else {
sdp->isp_req_ack_active_neg = 1;
sdp->isp_data_line_active_neg = 1;
}
IDPRINTF(3, ("%s: defaulting bus %d REQ/ACK Active Negation is %d\n",
isp->isp_name, channel, sdp->isp_req_ack_active_neg));
IDPRINTF(3, ("%s: defaulting bus %d DATA Active Negation is %d\n",
isp->isp_name, channel, sdp->isp_data_line_active_neg));
/*
* The trick here is to establish a default for the default (honk!)
* state (dev_flags). Then try and get the current status from
* the card to fill in the current state. We don't, in fact, set
* the default to the SAFE default state- that's not the goal state.
*/
for (tgt = 0; tgt < MAX_TARGETS; tgt++) {
sdp->isp_devparam[tgt].cur_offset = 0;
sdp->isp_devparam[tgt].cur_period = 0;
sdp->isp_devparam[tgt].dev_flags = DPARM_DEFAULT;
sdp->isp_devparam[tgt].cur_dflags = 0;
/*
* We default to Wide/Fast for versions less than a 1040
* (unless it's SBus).
*/
if ((isp->isp_bustype == ISP_BT_SBUS &&
isp->isp_type < ISP_HA_SCSI_1020A) ||
(isp->isp_bustype == ISP_BT_PCI &&
isp->isp_type < ISP_HA_SCSI_1040) ||
(isp->isp_clock && isp->isp_clock < 60)) {
sdp->isp_devparam[tgt].sync_offset =
ISP_10M_SYNCPARMS >> 8;
sdp->isp_devparam[tgt].sync_period =
ISP_10M_SYNCPARMS & 0xff;
} else if (IS_ULTRA2(isp)) {
sdp->isp_devparam[tgt].sync_offset =
ISP_40M_SYNCPARMS >> 8;
sdp->isp_devparam[tgt].sync_period =
ISP_40M_SYNCPARMS & 0xff;
} else {
sdp->isp_devparam[tgt].sync_offset =
ISP_20M_SYNCPARMS >> 8;
sdp->isp_devparam[tgt].sync_period =
ISP_20M_SYNCPARMS & 0xff;
}
/*
* Don't get current target parameters if we've been
* told not to use NVRAM- it's really the same thing.
*/
if ((isp->isp_confopts & ISP_CFG_NONVRAM) == 0) {
mbs.param[0] = MBOX_GET_TARGET_PARAMS;
mbs.param[1] = tgt << 8;
isp_mboxcmd(isp, &mbs);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
continue;
}
sdp->isp_devparam[tgt].cur_dflags = mbs.param[2];
sdp->isp_devparam[tgt].dev_flags = mbs.param[2];
sdp->isp_devparam[tgt].cur_period = mbs.param[3] & 0xff;
sdp->isp_devparam[tgt].cur_offset = mbs.param[3] >> 8;
/*
* The maximum period we can really see
* here is 100 (decimal), or 400 ns.
* For some unknown reason we sometimes
* get back wildass numbers from the
* boot device's parameters (alpha only).
*/
if ((mbs.param[3] & 0xff) <= 0x64) {
sdp->isp_devparam[tgt].sync_period =
mbs.param[3] & 0xff;
sdp->isp_devparam[tgt].sync_offset =
mbs.param[3] >> 8;
}
/*
* It is not safe to run Ultra Mode with a clock < 60.
*/
if (((isp->isp_clock && isp->isp_clock < 60) ||
(isp->isp_type < ISP_HA_SCSI_1020A)) &&
(sdp->isp_devparam[tgt].sync_period <=
(ISP_20M_SYNCPARMS & 0xff))) {
sdp->isp_devparam[tgt].sync_offset =
ISP_10M_SYNCPARMS >> 8;
sdp->isp_devparam[tgt].sync_period =
ISP_10M_SYNCPARMS & 0xff;
}
}
IDPRINTF(3, ("%s: bus %d tgt %d flags %x offset %x period %x\n",
isp->isp_name, channel, tgt,
sdp->isp_devparam[tgt].dev_flags,
sdp->isp_devparam[tgt].sync_offset,
sdp->isp_devparam[tgt].sync_period));
}
/*
* Establish default some more default parameters.
*/
sdp->isp_cmd_dma_burst_enable = 1;
sdp->isp_data_dma_burst_enabl = 1;
sdp->isp_fifo_threshold = 0;
sdp->isp_initiator_id = 7;
/* XXXX This is probably based upon clock XXXX */
if (isp->isp_type >= ISP_HA_SCSI_1040) {
sdp->isp_async_data_setup = 9;
} else {
sdp->isp_async_data_setup = 6;
}
sdp->isp_selection_timeout = 250;
sdp->isp_max_queue_depth = MAXISPREQUEST;
sdp->isp_tag_aging = 8;
sdp->isp_bus_reset_delay = 3;
sdp->isp_retry_count = 2;
sdp->isp_retry_delay = 2;
for (tgt = 0; tgt < MAX_TARGETS; tgt++) {
sdp->isp_devparam[tgt].exc_throttle = 16;
sdp->isp_devparam[tgt].dev_enable = 1;
}
}
/*
* Re-initialize the ISP and complete all orphaned commands
* with a 'botched' notice. The reset/init routines should
* not disturb an already active list of commands.
*
* Locks held prior to coming here.
*/
void
isp_restart(isp)
struct ispsoftc *isp;
{
ISP_SCSI_XFER_T *xs;
u_int32_t handle;
#if 0
isp->isp_gotdparms = 0;
#endif
isp_reset(isp);
if (isp->isp_state == ISP_RESETSTATE) {
isp_init(isp);
if (isp->isp_state == ISP_INITSTATE) {
isp->isp_state = ISP_RUNSTATE;
}
}
if (isp->isp_state != ISP_RUNSTATE) {
PRINTF("%s: isp_restart cannot restart ISP\n", isp->isp_name);
}
isp->isp_nactive = 0;
for (handle = 1; handle <= (int) isp->isp_maxcmds; handle++) {
xs = isp_find_xs(isp, handle);
if (xs == NULL) {
continue;
}
isp_destroy_handle(isp, handle);
if (XS_XFRLEN(xs)) {
ISP_DMAFREE(isp, xs, handle);
XS_RESID(xs) = XS_XFRLEN(xs);
} else {
XS_RESID(xs) = 0;
}
XS_SETERR(xs, HBA_BUSRESET);
XS_CMD_DONE(xs);
}
}
/*
* NVRAM Routines
*/
static int
isp_read_nvram(isp)
struct ispsoftc *isp;
{
int i, amt;
u_int8_t csum, minversion;
union {
u_int8_t _x[ISP2100_NVRAM_SIZE];
u_int16_t _s[ISP2100_NVRAM_SIZE>>1];
} _n;
#define nvram_data _n._x
#define nvram_words _n._s
if (IS_FC(isp)) {
amt = ISP2100_NVRAM_SIZE;
minversion = 1;
} else if (IS_ULTRA2(isp)) {
amt = ISP1080_NVRAM_SIZE;
minversion = 0;
} else {
amt = ISP_NVRAM_SIZE;
minversion = 2;
}
/*
* Just read the first two words first to see if we have a valid
* NVRAM to continue reading the rest with.
*/
for (i = 0; i < 2; i++) {
isp_rdnvram_word(isp, i, &nvram_words[i]);
}
if (nvram_data[0] != 'I' || nvram_data[1] != 'S' ||
nvram_data[2] != 'P') {
if (isp->isp_bustype != ISP_BT_SBUS) {
PRINTF("%s: invalid NVRAM header (%x,%x,%x,%x)\n",
isp->isp_name, nvram_data[0], nvram_data[1],
nvram_data[2], nvram_data[3]);
}
return (-1);
}
for (i = 2; i < amt>>1; i++) {
isp_rdnvram_word(isp, i, &nvram_words[i]);
}
for (csum = 0, i = 0; i < amt; i++) {
csum += nvram_data[i];
}
if (csum != 0) {
PRINTF("%s: invalid NVRAM checksum\n", isp->isp_name);
return (-1);
}
if (ISP_NVRAM_VERSION(nvram_data) < minversion) {
PRINTF("%s: version %d NVRAM not understood\n", isp->isp_name,
ISP_NVRAM_VERSION(nvram_data));
return (-1);
}
if (IS_ULTRA3(isp)) {
isp_parse_nvram_12160(isp, 0, nvram_data);
isp_parse_nvram_12160(isp, 1, nvram_data);
} else if (IS_1080(isp)) {
isp_parse_nvram_1080(isp, 0, nvram_data);
} else if (IS_1280(isp) || IS_1240(isp)) {
isp_parse_nvram_1080(isp, 0, nvram_data);
isp_parse_nvram_1080(isp, 1, nvram_data);
} else if (IS_SCSI(isp)) {
isp_parse_nvram_1020(isp, nvram_data);
} else {
isp_parse_nvram_2100(isp, nvram_data);
}
IDPRINTF(3, ("%s: NVRAM is valid\n", isp->isp_name));
return (0);
#undef nvram_data
#undef nvram_words
}
static void
isp_rdnvram_word(isp, wo, rp)
struct ispsoftc *isp;
int wo;
u_int16_t *rp;
{
int i, cbits;
u_int16_t bit, rqst;
ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT);
SYS_DELAY(2);
ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT|BIU_NVRAM_CLOCK);
SYS_DELAY(2);
if (IS_FC(isp)) {
wo &= ((ISP2100_NVRAM_SIZE >> 1) - 1);
rqst = (ISP_NVRAM_READ << 8) | wo;
cbits = 10;
} else if (IS_ULTRA2(isp)) {
wo &= ((ISP1080_NVRAM_SIZE >> 1) - 1);
rqst = (ISP_NVRAM_READ << 8) | wo;
cbits = 10;
} else {
wo &= ((ISP_NVRAM_SIZE >> 1) - 1);
rqst = (ISP_NVRAM_READ << 6) | wo;
cbits = 8;
}
/*
* Clock the word select request out...
*/
for (i = cbits; i >= 0; i--) {
if ((rqst >> i) & 1) {
bit = BIU_NVRAM_SELECT | BIU_NVRAM_DATAOUT;
} else {
bit = BIU_NVRAM_SELECT;
}
ISP_WRITE(isp, BIU_NVRAM, bit);
SYS_DELAY(2);
ISP_WRITE(isp, BIU_NVRAM, bit | BIU_NVRAM_CLOCK);
SYS_DELAY(2);
ISP_WRITE(isp, BIU_NVRAM, bit);
SYS_DELAY(2);
}
/*
* Now read the result back in (bits come back in MSB format).
*/
*rp = 0;
for (i = 0; i < 16; i++) {
u_int16_t rv;
*rp <<= 1;
ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT|BIU_NVRAM_CLOCK);
SYS_DELAY(2);
rv = ISP_READ(isp, BIU_NVRAM);
if (rv & BIU_NVRAM_DATAIN) {
*rp |= 1;
}
SYS_DELAY(2);
ISP_WRITE(isp, BIU_NVRAM, BIU_NVRAM_SELECT);
SYS_DELAY(2);
}
ISP_WRITE(isp, BIU_NVRAM, 0);
SYS_DELAY(2);
#if BYTE_ORDER == BIG_ENDIAN
*rp = ((*rp >> 8) | ((*rp & 0xff) << 8));
#endif
}
static void
isp_parse_nvram_1020(isp, nvram_data)
struct ispsoftc *isp;
u_int8_t *nvram_data;
{
int i;
static char *tru = "true";
static char *not = "false";
sdparam *sdp = (sdparam *) isp->isp_param;
sdp->isp_fifo_threshold =
ISP_NVRAM_FIFO_THRESHOLD(nvram_data) |
(ISP_NVRAM_FIFO_THRESHOLD_128(nvram_data) << 2);
sdp->isp_initiator_id =
ISP_NVRAM_INITIATOR_ID(nvram_data);
sdp->isp_bus_reset_delay =
ISP_NVRAM_BUS_RESET_DELAY(nvram_data);
sdp->isp_retry_count =
ISP_NVRAM_BUS_RETRY_COUNT(nvram_data);
sdp->isp_retry_delay =
ISP_NVRAM_BUS_RETRY_DELAY(nvram_data);
sdp->isp_async_data_setup =
ISP_NVRAM_ASYNC_DATA_SETUP_TIME(nvram_data);
if (isp->isp_type >= ISP_HA_SCSI_1040) {
if (sdp->isp_async_data_setup < 9) {
sdp->isp_async_data_setup = 9;
}
} else {
if (sdp->isp_async_data_setup != 6) {
sdp->isp_async_data_setup = 6;
}
}
sdp->isp_req_ack_active_neg =
ISP_NVRAM_REQ_ACK_ACTIVE_NEGATION(nvram_data);
sdp->isp_data_line_active_neg =
ISP_NVRAM_DATA_LINE_ACTIVE_NEGATION(nvram_data);
sdp->isp_data_dma_burst_enabl =
ISP_NVRAM_DATA_DMA_BURST_ENABLE(nvram_data);
sdp->isp_cmd_dma_burst_enable =
ISP_NVRAM_CMD_DMA_BURST_ENABLE(nvram_data);
sdp->isp_tag_aging =
ISP_NVRAM_TAG_AGE_LIMIT(nvram_data);
sdp->isp_selection_timeout =
ISP_NVRAM_SELECTION_TIMEOUT(nvram_data);
sdp->isp_max_queue_depth =
ISP_NVRAM_MAX_QUEUE_DEPTH(nvram_data);
isp->isp_fast_mttr = ISP_NVRAM_FAST_MTTR_ENABLE(nvram_data);
if (isp->isp_dblev > 2) {
PRINTF("%s: NVRAM values:\n", isp->isp_name);
PRINTF(" Fifo Threshold = 0x%x\n",
sdp->isp_fifo_threshold);
PRINTF(" Bus Reset Delay = %d\n",
sdp->isp_bus_reset_delay);
PRINTF(" Retry Count = %d\n",
sdp->isp_retry_count);
PRINTF(" Retry Delay = %d\n",
sdp->isp_retry_delay);
PRINTF(" Tag Age Limit = %d\n",
sdp->isp_tag_aging);
PRINTF(" Selection Timeout = %d\n",
sdp->isp_selection_timeout);
PRINTF(" Max Queue Depth = %d\n",
sdp->isp_max_queue_depth);
PRINTF(" Async Data Setup = 0x%x\n",
sdp->isp_async_data_setup);
PRINTF(" REQ/ACK Active Negation = %s\n",
sdp->isp_req_ack_active_neg? tru : not);
PRINTF(" Data Line Active Negation = %s\n",
sdp->isp_data_line_active_neg? tru : not);
PRINTF(" Data DMA Burst Enable = %s\n",
sdp->isp_data_dma_burst_enabl? tru : not);
PRINTF(" Cmd DMA Burst Enable = %s\n",
sdp->isp_cmd_dma_burst_enable? tru : not);
PRINTF(" Fast MTTR = %s\n",
isp->isp_fast_mttr? tru : not);
}
for (i = 0; i < MAX_TARGETS; i++) {
sdp->isp_devparam[i].dev_enable =
ISP_NVRAM_TGT_DEVICE_ENABLE(nvram_data, i);
sdp->isp_devparam[i].exc_throttle =
ISP_NVRAM_TGT_EXEC_THROTTLE(nvram_data, i);
sdp->isp_devparam[i].sync_offset =
ISP_NVRAM_TGT_SYNC_OFFSET(nvram_data, i);
sdp->isp_devparam[i].sync_period =
ISP_NVRAM_TGT_SYNC_PERIOD(nvram_data, i);
if (isp->isp_type < ISP_HA_SCSI_1040) {
/*
* If we're not ultra, we can't possibly
* be a shorter period than this.
*/
if (sdp->isp_devparam[i].sync_period < 0x19) {
sdp->isp_devparam[i].sync_period =
0x19;
}
if (sdp->isp_devparam[i].sync_offset > 0xc) {
sdp->isp_devparam[i].sync_offset =
0x0c;
}
} else {
if (sdp->isp_devparam[i].sync_offset > 0x8) {
sdp->isp_devparam[i].sync_offset = 0x8;
}
}
sdp->isp_devparam[i].dev_flags = 0;
if (ISP_NVRAM_TGT_RENEG(nvram_data, i))
sdp->isp_devparam[i].dev_flags |= DPARM_RENEG;
if (ISP_NVRAM_TGT_QFRZ(nvram_data, i)) {
PRINTF("%s: not supporting QFRZ option for "
"target %d\n", isp->isp_name, i);
}
sdp->isp_devparam[i].dev_flags |= DPARM_ARQ;
if (ISP_NVRAM_TGT_ARQ(nvram_data, i) == 0) {
PRINTF("%s: not disabling ARQ option for "
"target %d\n", isp->isp_name, i);
}
if (ISP_NVRAM_TGT_TQING(nvram_data, i))
sdp->isp_devparam[i].dev_flags |= DPARM_TQING;
if (ISP_NVRAM_TGT_SYNC(nvram_data, i))
sdp->isp_devparam[i].dev_flags |= DPARM_SYNC;
if (ISP_NVRAM_TGT_WIDE(nvram_data, i))
sdp->isp_devparam[i].dev_flags |= DPARM_WIDE;
if (ISP_NVRAM_TGT_PARITY(nvram_data, i))
sdp->isp_devparam[i].dev_flags |= DPARM_PARITY;
if (ISP_NVRAM_TGT_DISC(nvram_data, i))
sdp->isp_devparam[i].dev_flags |= DPARM_DISC;
sdp->isp_devparam[i].cur_dflags = 0; /* we don't know */
if (isp->isp_dblev > 2) {
PRINTF(" Target %d: Enabled %d Throttle %d "
"Offset %d Period %d Flags 0x%x\n", i,
sdp->isp_devparam[i].dev_enable,
sdp->isp_devparam[i].exc_throttle,
sdp->isp_devparam[i].sync_offset,
sdp->isp_devparam[i].sync_period,
sdp->isp_devparam[i].dev_flags);
}
}
}
static void
isp_parse_nvram_1080(isp, bus, nvram_data)
struct ispsoftc *isp;
int bus;
u_int8_t *nvram_data;
{
static char *tru = "true";
static char *not = "false";
int i;
sdparam *sdp = (sdparam *) isp->isp_param;
sdp += bus;
sdp->isp_fifo_threshold =
ISP1080_NVRAM_FIFO_THRESHOLD(nvram_data);
sdp->isp_initiator_id =
ISP1080_NVRAM_INITIATOR_ID(nvram_data, bus);
sdp->isp_bus_reset_delay =
ISP1080_NVRAM_BUS_RESET_DELAY(nvram_data, bus);
sdp->isp_retry_count =
ISP1080_NVRAM_BUS_RETRY_COUNT(nvram_data, bus);
sdp->isp_retry_delay =
ISP1080_NVRAM_BUS_RETRY_DELAY(nvram_data, bus);
sdp->isp_async_data_setup =
ISP1080_NVRAM_ASYNC_DATA_SETUP_TIME(nvram_data,
bus);
sdp->isp_req_ack_active_neg =
ISP1080_NVRAM_REQ_ACK_ACTIVE_NEGATION(nvram_data,
bus);
sdp->isp_data_line_active_neg =
ISP1080_NVRAM_DATA_LINE_ACTIVE_NEGATION(nvram_data,
bus);
sdp->isp_data_dma_burst_enabl =
ISP1080_NVRAM_BURST_ENABLE(nvram_data);
sdp->isp_cmd_dma_burst_enable =
ISP1080_NVRAM_BURST_ENABLE(nvram_data);
sdp->isp_selection_timeout =
ISP1080_NVRAM_SELECTION_TIMEOUT(nvram_data, bus);
sdp->isp_max_queue_depth =
ISP1080_NVRAM_MAX_QUEUE_DEPTH(nvram_data, bus);
if (isp->isp_dblev >= 3) {
PRINTF("%s: ISP1080 bus %d NVRAM values:\n",
isp->isp_name, bus);
PRINTF(" Initiator ID = %d\n",
sdp->isp_initiator_id);
PRINTF(" Fifo Threshold = 0x%x\n",
sdp->isp_fifo_threshold);
PRINTF(" Bus Reset Delay = %d\n",
sdp->isp_bus_reset_delay);
PRINTF(" Retry Count = %d\n",
sdp->isp_retry_count);
PRINTF(" Retry Delay = %d\n",
sdp->isp_retry_delay);
PRINTF(" Tag Age Limit = %d\n",
sdp->isp_tag_aging);
PRINTF(" Selection Timeout = %d\n",
sdp->isp_selection_timeout);
PRINTF(" Max Queue Depth = %d\n",
sdp->isp_max_queue_depth);
PRINTF(" Async Data Setup = 0x%x\n",
sdp->isp_async_data_setup);
PRINTF(" REQ/ACK Active Negation = %s\n",
sdp->isp_req_ack_active_neg? tru : not);
PRINTF(" Data Line Active Negation = %s\n",
sdp->isp_data_line_active_neg? tru : not);
PRINTF(" Cmd DMA Burst Enable = %s\n",
sdp->isp_cmd_dma_burst_enable? tru : not);
}
for (i = 0; i < MAX_TARGETS; i++) {
sdp->isp_devparam[i].dev_enable =
ISP1080_NVRAM_TGT_DEVICE_ENABLE(nvram_data, i, bus);
sdp->isp_devparam[i].exc_throttle =
ISP1080_NVRAM_TGT_EXEC_THROTTLE(nvram_data, i, bus);
sdp->isp_devparam[i].sync_offset =
ISP1080_NVRAM_TGT_SYNC_OFFSET(nvram_data, i, bus);
sdp->isp_devparam[i].sync_period =
ISP1080_NVRAM_TGT_SYNC_PERIOD(nvram_data, i, bus);
sdp->isp_devparam[i].dev_flags = 0;
if (ISP1080_NVRAM_TGT_RENEG(nvram_data, i, bus))
sdp->isp_devparam[i].dev_flags |= DPARM_RENEG;
if (ISP1080_NVRAM_TGT_QFRZ(nvram_data, i, bus)) {
PRINTF("%s: not supporting QFRZ option "
"for target %d bus %d\n",
isp->isp_name, i, bus);
}
sdp->isp_devparam[i].dev_flags |= DPARM_ARQ;
if (ISP1080_NVRAM_TGT_ARQ(nvram_data, i, bus) == 0) {
PRINTF("%s: not disabling ARQ option "
"for target %d bus %d\n",
isp->isp_name, i, bus);
}
if (ISP1080_NVRAM_TGT_TQING(nvram_data, i, bus))
sdp->isp_devparam[i].dev_flags |= DPARM_TQING;
if (ISP1080_NVRAM_TGT_SYNC(nvram_data, i, bus))
sdp->isp_devparam[i].dev_flags |= DPARM_SYNC;
if (ISP1080_NVRAM_TGT_WIDE(nvram_data, i, bus))
sdp->isp_devparam[i].dev_flags |= DPARM_WIDE;
if (ISP1080_NVRAM_TGT_PARITY(nvram_data, i, bus))
sdp->isp_devparam[i].dev_flags |= DPARM_PARITY;
if (ISP1080_NVRAM_TGT_DISC(nvram_data, i, bus))
sdp->isp_devparam[i].dev_flags |= DPARM_DISC;
sdp->isp_devparam[i].cur_dflags = 0;
if (isp->isp_dblev >= 3) {
PRINTF(" Target %d: Ena %d Throttle "
"%d Offset %d Period %d Flags "
"0x%x\n", i,
sdp->isp_devparam[i].dev_enable,
sdp->isp_devparam[i].exc_throttle,
sdp->isp_devparam[i].sync_offset,
sdp->isp_devparam[i].sync_period,
sdp->isp_devparam[i].dev_flags);
}
}
}
static void
isp_parse_nvram_12160(isp, bus, nvram_data)
struct ispsoftc *isp;
int bus;
u_int8_t *nvram_data;
{
static char *tru = "true";
static char *not = "false";
sdparam *sdp = (sdparam *) isp->isp_param;
int i;
sdp += bus;
sdp->isp_fifo_threshold =
ISP12160_NVRAM_FIFO_THRESHOLD(nvram_data);
sdp->isp_initiator_id =
ISP12160_NVRAM_INITIATOR_ID(nvram_data, bus);
sdp->isp_bus_reset_delay =
ISP12160_NVRAM_BUS_RESET_DELAY(nvram_data, bus);
sdp->isp_retry_count =
ISP12160_NVRAM_BUS_RETRY_COUNT(nvram_data, bus);
sdp->isp_retry_delay =
ISP12160_NVRAM_BUS_RETRY_DELAY(nvram_data, bus);
sdp->isp_async_data_setup =
ISP12160_NVRAM_ASYNC_DATA_SETUP_TIME(nvram_data,
bus);
sdp->isp_req_ack_active_neg =
ISP12160_NVRAM_REQ_ACK_ACTIVE_NEGATION(nvram_data,
bus);
sdp->isp_data_line_active_neg =
ISP12160_NVRAM_DATA_LINE_ACTIVE_NEGATION(nvram_data,
bus);
sdp->isp_data_dma_burst_enabl =
ISP12160_NVRAM_BURST_ENABLE(nvram_data);
sdp->isp_cmd_dma_burst_enable =
ISP12160_NVRAM_BURST_ENABLE(nvram_data);
sdp->isp_selection_timeout =
ISP12160_NVRAM_SELECTION_TIMEOUT(nvram_data, bus);
sdp->isp_max_queue_depth =
ISP12160_NVRAM_MAX_QUEUE_DEPTH(nvram_data, bus);
if (isp->isp_dblev >= 3) {
PRINTF("%s: ISP12160 bus %d NVRAM values:\n",
isp->isp_name, bus);
PRINTF(" Initiator ID = %d\n",
sdp->isp_initiator_id);
PRINTF(" Fifo Threshold = 0x%x\n",
sdp->isp_fifo_threshold);
PRINTF(" Bus Reset Delay = %d\n",
sdp->isp_bus_reset_delay);
PRINTF(" Retry Count = %d\n",
sdp->isp_retry_count);
PRINTF(" Retry Delay = %d\n",
sdp->isp_retry_delay);
PRINTF(" Tag Age Limit = %d\n",
sdp->isp_tag_aging);
PRINTF(" Selection Timeout = %d\n",
sdp->isp_selection_timeout);
PRINTF(" Max Queue Depth = %d\n",
sdp->isp_max_queue_depth);
PRINTF(" Async Data Setup = 0x%x\n",
sdp->isp_async_data_setup);
PRINTF(" REQ/ACK Active Negation = %s\n",
sdp->isp_req_ack_active_neg? tru : not);
PRINTF(" Data Line Active Negation = %s\n",
sdp->isp_data_line_active_neg? tru : not);
PRINTF(" Cmd DMA Burst Enable = %s\n",
sdp->isp_cmd_dma_burst_enable? tru : not);
}
for (i = 0; i < MAX_TARGETS; i++) {
sdp->isp_devparam[i].dev_enable =
ISP12160_NVRAM_TGT_DEVICE_ENABLE(nvram_data, i, bus);
sdp->isp_devparam[i].exc_throttle =
ISP12160_NVRAM_TGT_EXEC_THROTTLE(nvram_data, i, bus);
sdp->isp_devparam[i].sync_offset =
ISP12160_NVRAM_TGT_SYNC_OFFSET(nvram_data, i, bus);
sdp->isp_devparam[i].sync_period =
ISP12160_NVRAM_TGT_SYNC_PERIOD(nvram_data, i, bus);
sdp->isp_devparam[i].dev_flags = 0;
if (ISP12160_NVRAM_TGT_RENEG(nvram_data, i, bus))
sdp->isp_devparam[i].dev_flags |= DPARM_RENEG;
if (ISP12160_NVRAM_TGT_QFRZ(nvram_data, i, bus)) {
PRINTF("%s: not supporting QFRZ option "
"for target %d bus %d\n", isp->isp_name, i, bus);
}
sdp->isp_devparam[i].dev_flags |= DPARM_ARQ;
if (ISP12160_NVRAM_TGT_ARQ(nvram_data, i, bus) == 0) {
PRINTF("%s: not disabling ARQ option "
"for target %d bus %d\n", isp->isp_name, i, bus);
}
if (ISP12160_NVRAM_TGT_TQING(nvram_data, i, bus))
sdp->isp_devparam[i].dev_flags |= DPARM_TQING;
if (ISP12160_NVRAM_TGT_SYNC(nvram_data, i, bus))
sdp->isp_devparam[i].dev_flags |= DPARM_SYNC;
if (ISP12160_NVRAM_TGT_WIDE(nvram_data, i, bus))
sdp->isp_devparam[i].dev_flags |= DPARM_WIDE;
if (ISP12160_NVRAM_TGT_PARITY(nvram_data, i, bus))
sdp->isp_devparam[i].dev_flags |= DPARM_PARITY;
if (ISP12160_NVRAM_TGT_DISC(nvram_data, i, bus))
sdp->isp_devparam[i].dev_flags |= DPARM_DISC;
sdp->isp_devparam[i].cur_dflags = 0;
if (isp->isp_dblev >= 3) {
PRINTF(" Target %d: Ena %d Throttle %d Offset %d "
"Period %d Flags 0x%x\n", i,
sdp->isp_devparam[i].dev_enable,
sdp->isp_devparam[i].exc_throttle,
sdp->isp_devparam[i].sync_offset,
sdp->isp_devparam[i].sync_period,
sdp->isp_devparam[i].dev_flags);
}
}
}
static void
isp_parse_nvram_2100(isp, nvram_data)
struct ispsoftc *isp;
u_int8_t *nvram_data;
{
fcparam *fcp = (fcparam *) isp->isp_param;
union {
struct {
#if BYTE_ORDER == BIG_ENDIAN
u_int32_t hi32;
u_int32_t lo32;
#else
u_int32_t lo32;
u_int32_t hi32;
#endif
} wd;
u_int64_t full64;
} wwnstore;
wwnstore.full64 = ISP2100_NVRAM_NODE_NAME(nvram_data);
/*
* Broken PTI cards with nothing in the top nibble. Pah.
*/
if ((wwnstore.wd.hi32 >> 28) == 0) {
wwnstore.wd.hi32 |= (2 << 28);
CFGPRINTF("%s: (corrected) Adapter WWN 0x%08x%08x\n",
isp->isp_name, wwnstore.wd.hi32, wwnstore.wd.lo32);
} else {
CFGPRINTF("%s: Adapter WWN 0x%08x%08x\n", isp->isp_name,
wwnstore.wd.hi32, wwnstore.wd.lo32);
}
fcp->isp_nodewwn = wwnstore.full64;
/*
* If the Node WWN has 2 in the top nibble, we can
* authoritatively construct a Port WWN by adding
* our unit number (plus one to make it nonzero) and
* putting it into bits 59..56. If the top nibble isn't
* 2, then we just set them identically.
*/
if ((fcp->isp_nodewwn >> 60) == 2) {
fcp->isp_portwwn = fcp->isp_nodewwn |
(((u_int64_t)(isp->isp_unit+1)) << 56);
} else {
fcp->isp_portwwn = fcp->isp_nodewwn;
}
wwnstore.full64 = ISP2100_NVRAM_BOOT_NODE_NAME(nvram_data);
if (wwnstore.full64 != 0) {
PRINTF("%s: BOOT DEVICE WWN 0x%08x%08x\n",
isp->isp_name, wwnstore.wd.hi32, wwnstore.wd.lo32);
}
fcp->isp_maxalloc =
ISP2100_NVRAM_MAXIOCBALLOCATION(nvram_data);
fcp->isp_maxfrmlen =
ISP2100_NVRAM_MAXFRAMELENGTH(nvram_data);
fcp->isp_retry_delay =
ISP2100_NVRAM_RETRY_DELAY(nvram_data);
fcp->isp_retry_count =
ISP2100_NVRAM_RETRY_COUNT(nvram_data);
fcp->isp_loopid =
ISP2100_NVRAM_HARDLOOPID(nvram_data);
fcp->isp_execthrottle =
ISP2100_NVRAM_EXECUTION_THROTTLE(nvram_data);
fcp->isp_fwoptions = ISP2100_NVRAM_OPTIONS(nvram_data);
if (isp->isp_dblev > 2) {
PRINTF("%s: NVRAM values:\n", isp->isp_name);
PRINTF(" Max IOCB Allocation = %d\n",
fcp->isp_maxalloc);
PRINTF(" Max Frame Length = %d\n",
fcp->isp_maxfrmlen);
PRINTF(" Execution Throttle = %d\n",
fcp->isp_execthrottle);
PRINTF(" Retry Count = %d\n",
fcp->isp_retry_count);
PRINTF(" Retry Delay = %d\n",
fcp->isp_retry_delay);
PRINTF(" Hard Loop ID = %d\n",
fcp->isp_loopid);
PRINTF(" Options = 0x%x\n",
fcp->isp_fwoptions);
PRINTF(" HBA Options = 0x%x\n",
ISP2100_NVRAM_HBA_OPTIONS(nvram_data));
}
}
Reference in New Issue View Git Blame Copy Permalink