9389d5a95e
These variants have a few differences from the default AR9485 NIC, namely: * a non-default antenna switch config; * slightly different RX gain table setup; * an external XLNA hooked up to a GPIO pin; * (and not yet done) RSSI threshold differences when doing slow diversity. To make this possible: * Add the PCI device list from Linux ath9k, complete with vendor and sub-vendor IDs for various things to be enabled; * .. and until FreeBSD learns about a PCI device list like this, write a search function inspired by the USB device enumeration code; * add HAL_OPS_CONFIG to the HAL attach methods; the HAL can use this to initialise its local driver parameters upon attach; * copy these parameters over in the AR9300 HAL; * don't default to override the antenna switch - only do it for the chips that require it; * I brought over ar9300_attenuation_apply() from ath9k which is cleaner and easier to read for this particular NIC. This is a work in progress. I'm worried that there's some post-AR9380 NIC out there which doesn't work without the antenna override set as I currently haven't implemented bluetooth coexistence for the AR9380 and later HAL. But I'd rather have this code in the tree and fix it up before 11.0-RELEASE happens versus having a set of newer NICs in laptops be effectively RX deaf. Tested: * AR9380 (STA) * AR9485 CUS198 (STA) Obtained from: Qualcomm Atheros, Linux ath9k
977 lines
31 KiB
C
977 lines
31 KiB
C
/*
|
|
* Copyright (c) 2008-2009 Sam Leffler, Errno Consulting
|
|
* Copyright (c) 2008 Atheros Communications, Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
#include "opt_ah.h"
|
|
|
|
#include "ah.h"
|
|
#include "ah_internal.h"
|
|
#include "ah_devid.h"
|
|
|
|
#include "ah_eeprom_v14.h" /* XXX for tx/rx gain */
|
|
|
|
#include "ar9002/ar9280.h"
|
|
#include "ar5416/ar5416reg.h"
|
|
#include "ar5416/ar5416phy.h"
|
|
|
|
#include "ar9002/ar9280v1.ini"
|
|
#include "ar9002/ar9280v2.ini"
|
|
#include "ar9002/ar9280_olc.h"
|
|
|
|
static const HAL_PERCAL_DATA ar9280_iq_cal = { /* single sample */
|
|
.calName = "IQ", .calType = IQ_MISMATCH_CAL,
|
|
.calNumSamples = MIN_CAL_SAMPLES,
|
|
.calCountMax = PER_MAX_LOG_COUNT,
|
|
.calCollect = ar5416IQCalCollect,
|
|
.calPostProc = ar5416IQCalibration
|
|
};
|
|
static const HAL_PERCAL_DATA ar9280_adc_gain_cal = { /* single sample */
|
|
.calName = "ADC Gain", .calType = ADC_GAIN_CAL,
|
|
.calNumSamples = MIN_CAL_SAMPLES,
|
|
.calCountMax = PER_MAX_LOG_COUNT,
|
|
.calCollect = ar5416AdcGainCalCollect,
|
|
.calPostProc = ar5416AdcGainCalibration
|
|
};
|
|
static const HAL_PERCAL_DATA ar9280_adc_dc_cal = { /* single sample */
|
|
.calName = "ADC DC", .calType = ADC_DC_CAL,
|
|
.calNumSamples = MIN_CAL_SAMPLES,
|
|
.calCountMax = PER_MAX_LOG_COUNT,
|
|
.calCollect = ar5416AdcDcCalCollect,
|
|
.calPostProc = ar5416AdcDcCalibration
|
|
};
|
|
static const HAL_PERCAL_DATA ar9280_adc_init_dc_cal = {
|
|
.calName = "ADC Init DC", .calType = ADC_DC_INIT_CAL,
|
|
.calNumSamples = MIN_CAL_SAMPLES,
|
|
.calCountMax = INIT_LOG_COUNT,
|
|
.calCollect = ar5416AdcDcCalCollect,
|
|
.calPostProc = ar5416AdcDcCalibration
|
|
};
|
|
|
|
static void ar9280ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore,
|
|
HAL_BOOL power_off);
|
|
static void ar9280DisablePCIE(struct ath_hal *ah);
|
|
static HAL_BOOL ar9280FillCapabilityInfo(struct ath_hal *ah);
|
|
static void ar9280WriteIni(struct ath_hal *ah,
|
|
const struct ieee80211_channel *chan);
|
|
|
|
static void
|
|
ar9280AniSetup(struct ath_hal *ah)
|
|
{
|
|
/*
|
|
* These are the parameters from the AR5416 ANI code;
|
|
* they likely need quite a bit of adjustment for the
|
|
* AR9280.
|
|
*/
|
|
static const struct ar5212AniParams aniparams = {
|
|
.maxNoiseImmunityLevel = 4, /* levels 0..4 */
|
|
.totalSizeDesired = { -55, -55, -55, -55, -62 },
|
|
.coarseHigh = { -14, -14, -14, -14, -12 },
|
|
.coarseLow = { -64, -64, -64, -64, -70 },
|
|
.firpwr = { -78, -78, -78, -78, -80 },
|
|
.maxSpurImmunityLevel = 7,
|
|
.cycPwrThr1 = { 2, 4, 6, 8, 10, 12, 14, 16 },
|
|
.maxFirstepLevel = 2, /* levels 0..2 */
|
|
.firstep = { 0, 4, 8 },
|
|
.ofdmTrigHigh = 500,
|
|
.ofdmTrigLow = 200,
|
|
.cckTrigHigh = 200,
|
|
.cckTrigLow = 100,
|
|
.rssiThrHigh = 40,
|
|
.rssiThrLow = 7,
|
|
.period = 100,
|
|
};
|
|
/* NB: disable ANI noise immmunity for reliable RIFS rx */
|
|
AH5416(ah)->ah_ani_function &= ~(1 << HAL_ANI_NOISE_IMMUNITY_LEVEL);
|
|
|
|
/* NB: ANI is not enabled yet */
|
|
ar5416AniAttach(ah, &aniparams, &aniparams, AH_TRUE);
|
|
}
|
|
|
|
void
|
|
ar9280InitPLL(struct ath_hal *ah, const struct ieee80211_channel *chan)
|
|
{
|
|
uint32_t pll = SM(0x5, AR_RTC_SOWL_PLL_REFDIV);
|
|
|
|
if (AR_SREV_MERLIN_20(ah) &&
|
|
chan != AH_NULL && IEEE80211_IS_CHAN_5GHZ(chan)) {
|
|
/*
|
|
* PLL WAR for Merlin 2.0/2.1
|
|
* When doing fast clock, set PLL to 0x142c
|
|
* Else, set PLL to 0x2850 to prevent reset-to-reset variation
|
|
*/
|
|
pll = IS_5GHZ_FAST_CLOCK_EN(ah, chan) ? 0x142c : 0x2850;
|
|
if (IEEE80211_IS_CHAN_HALF(chan))
|
|
pll |= SM(0x1, AR_RTC_SOWL_PLL_CLKSEL);
|
|
else if (IEEE80211_IS_CHAN_QUARTER(chan))
|
|
pll |= SM(0x2, AR_RTC_SOWL_PLL_CLKSEL);
|
|
} else if (AR_SREV_MERLIN_10_OR_LATER(ah)) {
|
|
pll = SM(0x5, AR_RTC_SOWL_PLL_REFDIV);
|
|
if (chan != AH_NULL) {
|
|
if (IEEE80211_IS_CHAN_HALF(chan))
|
|
pll |= SM(0x1, AR_RTC_SOWL_PLL_CLKSEL);
|
|
else if (IEEE80211_IS_CHAN_QUARTER(chan))
|
|
pll |= SM(0x2, AR_RTC_SOWL_PLL_CLKSEL);
|
|
if (IEEE80211_IS_CHAN_5GHZ(chan))
|
|
pll |= SM(0x28, AR_RTC_SOWL_PLL_DIV);
|
|
else
|
|
pll |= SM(0x2c, AR_RTC_SOWL_PLL_DIV);
|
|
} else
|
|
pll |= SM(0x2c, AR_RTC_SOWL_PLL_DIV);
|
|
}
|
|
|
|
OS_REG_WRITE(ah, AR_RTC_PLL_CONTROL, pll);
|
|
OS_DELAY(RTC_PLL_SETTLE_DELAY);
|
|
OS_REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_SLEEP_DERIVED_CLK);
|
|
}
|
|
|
|
/* XXX shouldn't be here! */
|
|
#define EEP_MINOR(_ah) \
|
|
(AH_PRIVATE(_ah)->ah_eeversion & AR5416_EEP_VER_MINOR_MASK)
|
|
|
|
/*
|
|
* Attach for an AR9280 part.
|
|
*/
|
|
static struct ath_hal *
|
|
ar9280Attach(uint16_t devid, HAL_SOFTC sc,
|
|
HAL_BUS_TAG st, HAL_BUS_HANDLE sh, uint16_t *eepromdata,
|
|
HAL_OPS_CONFIG *ah_config,
|
|
HAL_STATUS *status)
|
|
{
|
|
struct ath_hal_9280 *ahp9280;
|
|
struct ath_hal_5212 *ahp;
|
|
struct ath_hal *ah;
|
|
uint32_t val;
|
|
HAL_STATUS ecode;
|
|
HAL_BOOL rfStatus;
|
|
int8_t pwr_table_offset;
|
|
uint8_t pwr;
|
|
|
|
HALDEBUG(AH_NULL, HAL_DEBUG_ATTACH, "%s: sc %p st %p sh %p\n",
|
|
__func__, sc, (void*) st, (void*) sh);
|
|
|
|
/* NB: memory is returned zero'd */
|
|
ahp9280 = ath_hal_malloc(sizeof (struct ath_hal_9280));
|
|
if (ahp9280 == AH_NULL) {
|
|
HALDEBUG(AH_NULL, HAL_DEBUG_ANY,
|
|
"%s: cannot allocate memory for state block\n", __func__);
|
|
*status = HAL_ENOMEM;
|
|
return AH_NULL;
|
|
}
|
|
ahp = AH5212(ahp9280);
|
|
ah = &ahp->ah_priv.h;
|
|
|
|
ar5416InitState(AH5416(ah), devid, sc, st, sh, status);
|
|
|
|
/*
|
|
* Use the "local" EEPROM data given to us by the higher layers.
|
|
* This is a private copy out of system flash. The Linux ath9k
|
|
* commit for the initial AR9130 support mentions MMIO flash
|
|
* access is "unreliable." -adrian
|
|
*/
|
|
if (eepromdata != AH_NULL) {
|
|
AH_PRIVATE((ah))->ah_eepromRead = ath_hal_EepromDataRead;
|
|
AH_PRIVATE((ah))->ah_eepromWrite = NULL;
|
|
ah->ah_eepromdata = eepromdata;
|
|
}
|
|
|
|
/* XXX override with 9280 specific state */
|
|
/* override 5416 methods for our needs */
|
|
AH5416(ah)->ah_initPLL = ar9280InitPLL;
|
|
|
|
ah->ah_setAntennaSwitch = ar9280SetAntennaSwitch;
|
|
ah->ah_configPCIE = ar9280ConfigPCIE;
|
|
ah->ah_disablePCIE = ar9280DisablePCIE;
|
|
|
|
AH5416(ah)->ah_cal.iqCalData.calData = &ar9280_iq_cal;
|
|
AH5416(ah)->ah_cal.adcGainCalData.calData = &ar9280_adc_gain_cal;
|
|
AH5416(ah)->ah_cal.adcDcCalData.calData = &ar9280_adc_dc_cal;
|
|
AH5416(ah)->ah_cal.adcDcCalInitData.calData = &ar9280_adc_init_dc_cal;
|
|
AH5416(ah)->ah_cal.suppCals = ADC_GAIN_CAL | ADC_DC_CAL | IQ_MISMATCH_CAL;
|
|
|
|
AH5416(ah)->ah_spurMitigate = ar9280SpurMitigate;
|
|
AH5416(ah)->ah_writeIni = ar9280WriteIni;
|
|
AH5416(ah)->ah_olcInit = ar9280olcInit;
|
|
AH5416(ah)->ah_olcTempCompensation = ar9280olcTemperatureCompensation;
|
|
AH5416(ah)->ah_setPowerCalTable = ar9280SetPowerCalTable;
|
|
|
|
AH5416(ah)->ah_rx_chainmask = AR9280_DEFAULT_RXCHAINMASK;
|
|
AH5416(ah)->ah_tx_chainmask = AR9280_DEFAULT_TXCHAINMASK;
|
|
|
|
if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON)) {
|
|
/* reset chip */
|
|
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't reset chip\n",
|
|
__func__);
|
|
ecode = HAL_EIO;
|
|
goto bad;
|
|
}
|
|
|
|
if (!ar5416SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) {
|
|
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't wakeup chip\n",
|
|
__func__);
|
|
ecode = HAL_EIO;
|
|
goto bad;
|
|
}
|
|
/* Read Revisions from Chips before taking out of reset */
|
|
val = OS_REG_READ(ah, AR_SREV);
|
|
HALDEBUG(ah, HAL_DEBUG_ATTACH,
|
|
"%s: ID 0x%x VERSION 0x%x TYPE 0x%x REVISION 0x%x\n",
|
|
__func__, MS(val, AR_XSREV_ID), MS(val, AR_XSREV_VERSION),
|
|
MS(val, AR_XSREV_TYPE), MS(val, AR_XSREV_REVISION));
|
|
/* NB: include chip type to differentiate from pre-Sowl versions */
|
|
AH_PRIVATE(ah)->ah_macVersion =
|
|
(val & AR_XSREV_VERSION) >> AR_XSREV_TYPE_S;
|
|
AH_PRIVATE(ah)->ah_macRev = MS(val, AR_XSREV_REVISION);
|
|
AH_PRIVATE(ah)->ah_ispcie = (val & AR_XSREV_TYPE_HOST_MODE) == 0;
|
|
|
|
/* setup common ini data; rf backends handle remainder */
|
|
if (AR_SREV_MERLIN_20_OR_LATER(ah)) {
|
|
HAL_INI_INIT(&ahp->ah_ini_modes, ar9280Modes_v2, 6);
|
|
HAL_INI_INIT(&ahp->ah_ini_common, ar9280Common_v2, 2);
|
|
HAL_INI_INIT(&AH5416(ah)->ah_ini_pcieserdes,
|
|
ar9280PciePhy_clkreq_always_on_L1_v2, 2);
|
|
HAL_INI_INIT(&ahp9280->ah_ini_xmodes,
|
|
ar9280Modes_fast_clock_v2, 3);
|
|
} else {
|
|
HAL_INI_INIT(&ahp->ah_ini_modes, ar9280Modes_v1, 6);
|
|
HAL_INI_INIT(&ahp->ah_ini_common, ar9280Common_v1, 2);
|
|
HAL_INI_INIT(&AH5416(ah)->ah_ini_pcieserdes,
|
|
ar9280PciePhy_v1, 2);
|
|
}
|
|
ar5416AttachPCIE(ah);
|
|
|
|
ecode = ath_hal_v14EepromAttach(ah);
|
|
if (ecode != HAL_OK)
|
|
goto bad;
|
|
|
|
if (!ar5416ChipReset(ah, AH_NULL)) { /* reset chip */
|
|
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
|
|
ecode = HAL_EIO;
|
|
goto bad;
|
|
}
|
|
|
|
AH_PRIVATE(ah)->ah_phyRev = OS_REG_READ(ah, AR_PHY_CHIP_ID);
|
|
|
|
if (!ar5212ChipTest(ah)) {
|
|
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: hardware self-test failed\n",
|
|
__func__);
|
|
ecode = HAL_ESELFTEST;
|
|
goto bad;
|
|
}
|
|
|
|
/*
|
|
* Set correct Baseband to analog shift
|
|
* setting to access analog chips.
|
|
*/
|
|
OS_REG_WRITE(ah, AR_PHY(0), 0x00000007);
|
|
|
|
/* Read Radio Chip Rev Extract */
|
|
AH_PRIVATE(ah)->ah_analog5GhzRev = ar5416GetRadioRev(ah);
|
|
switch (AH_PRIVATE(ah)->ah_analog5GhzRev & AR_RADIO_SREV_MAJOR) {
|
|
case AR_RAD2133_SREV_MAJOR: /* Sowl: 2G/3x3 */
|
|
case AR_RAD5133_SREV_MAJOR: /* Sowl: 2+5G/3x3 */
|
|
break;
|
|
default:
|
|
if (AH_PRIVATE(ah)->ah_analog5GhzRev == 0) {
|
|
AH_PRIVATE(ah)->ah_analog5GhzRev =
|
|
AR_RAD5133_SREV_MAJOR;
|
|
break;
|
|
}
|
|
#ifdef AH_DEBUG
|
|
HALDEBUG(ah, HAL_DEBUG_ANY,
|
|
"%s: 5G Radio Chip Rev 0x%02X is not supported by "
|
|
"this driver\n", __func__,
|
|
AH_PRIVATE(ah)->ah_analog5GhzRev);
|
|
ecode = HAL_ENOTSUPP;
|
|
goto bad;
|
|
#endif
|
|
}
|
|
rfStatus = ar9280RfAttach(ah, &ecode);
|
|
if (!rfStatus) {
|
|
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: RF setup failed, status %u\n",
|
|
__func__, ecode);
|
|
goto bad;
|
|
}
|
|
|
|
/* Enable fixup for AR_AN_TOP2 if necessary */
|
|
/*
|
|
* The v14 EEPROM layer returns HAL_EIO if PWDCLKIND isn't supported
|
|
* by the EEPROM version.
|
|
*
|
|
* ath9k checks the EEPROM minor version is >= 0x0a here, instead of
|
|
* the abstracted EEPROM access layer.
|
|
*/
|
|
ecode = ath_hal_eepromGet(ah, AR_EEP_PWDCLKIND, &pwr);
|
|
if (AR_SREV_MERLIN_20_OR_LATER(ah) && ecode == HAL_OK && pwr == 0) {
|
|
printf("[ath] enabling AN_TOP2_FIXUP\n");
|
|
AH5416(ah)->ah_need_an_top2_fixup = 1;
|
|
}
|
|
|
|
/*
|
|
* Check whether the power table offset isn't the default.
|
|
* This can occur with eeprom minor V21 or greater on Merlin.
|
|
*/
|
|
(void) ath_hal_eepromGet(ah, AR_EEP_PWR_TABLE_OFFSET, &pwr_table_offset);
|
|
if (pwr_table_offset != AR5416_PWR_TABLE_OFFSET_DB)
|
|
ath_hal_printf(ah, "[ath]: default pwr offset: %d dBm != EEPROM pwr offset: %d dBm; curves will be adjusted.\n",
|
|
AR5416_PWR_TABLE_OFFSET_DB, (int) pwr_table_offset);
|
|
|
|
/* XXX check for >= minor ver 17 */
|
|
if (AR_SREV_MERLIN_20(ah)) {
|
|
/* setup rxgain table */
|
|
switch (ath_hal_eepromGet(ah, AR_EEP_RXGAIN_TYPE, AH_NULL)) {
|
|
case AR5416_EEP_RXGAIN_13dB_BACKOFF:
|
|
HAL_INI_INIT(&ahp9280->ah_ini_rxgain,
|
|
ar9280Modes_backoff_13db_rxgain_v2, 6);
|
|
break;
|
|
case AR5416_EEP_RXGAIN_23dB_BACKOFF:
|
|
HAL_INI_INIT(&ahp9280->ah_ini_rxgain,
|
|
ar9280Modes_backoff_23db_rxgain_v2, 6);
|
|
break;
|
|
case AR5416_EEP_RXGAIN_ORIG:
|
|
HAL_INI_INIT(&ahp9280->ah_ini_rxgain,
|
|
ar9280Modes_original_rxgain_v2, 6);
|
|
break;
|
|
default:
|
|
HALASSERT(AH_FALSE);
|
|
goto bad; /* XXX ? try to continue */
|
|
}
|
|
}
|
|
|
|
/* XXX check for >= minor ver 19 */
|
|
if (AR_SREV_MERLIN_20(ah)) {
|
|
/* setp txgain table */
|
|
switch (ath_hal_eepromGet(ah, AR_EEP_TXGAIN_TYPE, AH_NULL)) {
|
|
case AR5416_EEP_TXGAIN_HIGH_POWER:
|
|
HAL_INI_INIT(&ahp9280->ah_ini_txgain,
|
|
ar9280Modes_high_power_tx_gain_v2, 6);
|
|
break;
|
|
case AR5416_EEP_TXGAIN_ORIG:
|
|
HAL_INI_INIT(&ahp9280->ah_ini_txgain,
|
|
ar9280Modes_original_tx_gain_v2, 6);
|
|
break;
|
|
default:
|
|
HALASSERT(AH_FALSE);
|
|
goto bad; /* XXX ? try to continue */
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Got everything we need now to setup the capabilities.
|
|
*/
|
|
if (!ar9280FillCapabilityInfo(ah)) {
|
|
ecode = HAL_EEREAD;
|
|
goto bad;
|
|
}
|
|
|
|
ecode = ath_hal_eepromGet(ah, AR_EEP_MACADDR, ahp->ah_macaddr);
|
|
if (ecode != HAL_OK) {
|
|
HALDEBUG(ah, HAL_DEBUG_ANY,
|
|
"%s: error getting mac address from EEPROM\n", __func__);
|
|
goto bad;
|
|
}
|
|
/* XXX How about the serial number ? */
|
|
/* Read Reg Domain */
|
|
AH_PRIVATE(ah)->ah_currentRD =
|
|
ath_hal_eepromGet(ah, AR_EEP_REGDMN_0, AH_NULL);
|
|
AH_PRIVATE(ah)->ah_currentRDext =
|
|
ath_hal_eepromGet(ah, AR_EEP_REGDMN_1, AH_NULL);
|
|
|
|
/*
|
|
* ah_miscMode is populated by ar5416FillCapabilityInfo()
|
|
* starting from griffin. Set here to make sure that
|
|
* AR_MISC_MODE_MIC_NEW_LOC_ENABLE is set before a GTK is
|
|
* placed into hardware.
|
|
*/
|
|
if (ahp->ah_miscMode != 0)
|
|
OS_REG_WRITE(ah, AR_MISC_MODE, OS_REG_READ(ah, AR_MISC_MODE) | ahp->ah_miscMode);
|
|
|
|
ar9280AniSetup(ah); /* Anti Noise Immunity */
|
|
|
|
/* Setup noise floor min/max/nominal values */
|
|
AH5416(ah)->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9280_2GHZ;
|
|
AH5416(ah)->nf_2g.min = AR_PHY_CCA_MIN_GOOD_VAL_9280_2GHZ;
|
|
AH5416(ah)->nf_2g.nominal = AR_PHY_CCA_NOM_VAL_9280_2GHZ;
|
|
AH5416(ah)->nf_5g.max = AR_PHY_CCA_MAX_GOOD_VAL_9280_5GHZ;
|
|
AH5416(ah)->nf_5g.min = AR_PHY_CCA_MIN_GOOD_VAL_9280_5GHZ;
|
|
AH5416(ah)->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_9280_5GHZ;
|
|
|
|
ar5416InitNfHistBuff(AH5416(ah)->ah_cal.nfCalHist);
|
|
|
|
HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s: return\n", __func__);
|
|
|
|
return ah;
|
|
bad:
|
|
if (ah != AH_NULL)
|
|
ah->ah_detach(ah);
|
|
if (status)
|
|
*status = ecode;
|
|
return AH_NULL;
|
|
}
|
|
|
|
static void
|
|
ar9280ConfigPCIE(struct ath_hal *ah, HAL_BOOL restore, HAL_BOOL power_off)
|
|
{
|
|
uint32_t val;
|
|
|
|
if (AH_PRIVATE(ah)->ah_ispcie && !restore) {
|
|
ath_hal_ini_write(ah, &AH5416(ah)->ah_ini_pcieserdes, 1, 0);
|
|
OS_DELAY(1000);
|
|
}
|
|
|
|
|
|
/*
|
|
* Set PCIe workaround bits
|
|
*
|
|
* NOTE:
|
|
*
|
|
* In Merlin and Kite, bit 14 in WA register (disable L1) should only
|
|
* be set when device enters D3 and be cleared when device comes back
|
|
* to D0.
|
|
*/
|
|
if (power_off) { /* Power-off */
|
|
OS_REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
|
|
|
|
val = OS_REG_READ(ah, AR_WA);
|
|
|
|
/*
|
|
* Disable bit 6 and 7 before entering D3 to prevent
|
|
* system hang.
|
|
*/
|
|
val &= ~(AR_WA_BIT6 | AR_WA_BIT7);
|
|
|
|
/*
|
|
* XXX Not sure, is specified in the reference HAL.
|
|
*/
|
|
val |= AR_WA_BIT22;
|
|
|
|
/*
|
|
* See above: set AR_WA_D3_L1_DISABLE when entering D3 state.
|
|
*
|
|
* XXX The reference HAL does it this way - it only sets
|
|
* AR_WA_D3_L1_DISABLE if it's set in AR9280_WA_DEFAULT,
|
|
* which it (currently) isn't. So the following statement
|
|
* is currently a NOP.
|
|
*/
|
|
if (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE)
|
|
val |= AR_WA_D3_L1_DISABLE;
|
|
|
|
OS_REG_WRITE(ah, AR_WA, val);
|
|
} else { /* Power-on */
|
|
val = AR9280_WA_DEFAULT;
|
|
|
|
/*
|
|
* See note above: make sure L1_DISABLE is not set.
|
|
*/
|
|
val &= (~AR_WA_D3_L1_DISABLE);
|
|
OS_REG_WRITE(ah, AR_WA, val);
|
|
|
|
/* set bit 19 to allow forcing of pcie core into L1 state */
|
|
OS_REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ar9280DisablePCIE(struct ath_hal *ah)
|
|
{
|
|
}
|
|
|
|
static void
|
|
ar9280WriteIni(struct ath_hal *ah, const struct ieee80211_channel *chan)
|
|
{
|
|
u_int modesIndex, freqIndex;
|
|
int regWrites = 0;
|
|
int i;
|
|
const HAL_INI_ARRAY *ia;
|
|
|
|
/* Setup the indices for the next set of register array writes */
|
|
/* XXX Ignore 11n dynamic mode on the AR5416 for the moment */
|
|
if (IEEE80211_IS_CHAN_2GHZ(chan)) {
|
|
freqIndex = 2;
|
|
if (IEEE80211_IS_CHAN_HT40(chan))
|
|
modesIndex = 3;
|
|
else if (IEEE80211_IS_CHAN_108G(chan))
|
|
modesIndex = 5;
|
|
else
|
|
modesIndex = 4;
|
|
} else {
|
|
freqIndex = 1;
|
|
if (IEEE80211_IS_CHAN_HT40(chan) ||
|
|
IEEE80211_IS_CHAN_TURBO(chan))
|
|
modesIndex = 2;
|
|
else
|
|
modesIndex = 1;
|
|
}
|
|
|
|
/* Set correct Baseband to analog shift setting to access analog chips. */
|
|
OS_REG_WRITE(ah, AR_PHY(0), 0x00000007);
|
|
OS_REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC);
|
|
|
|
/*
|
|
* This is unwound because at the moment, there's a requirement
|
|
* for Merlin (and later, perhaps) to have a specific bit fixed
|
|
* in the AR_AN_TOP2 register before writing it.
|
|
*/
|
|
ia = &AH5212(ah)->ah_ini_modes;
|
|
#if 0
|
|
regWrites = ath_hal_ini_write(ah, &AH5212(ah)->ah_ini_modes,
|
|
modesIndex, regWrites);
|
|
#endif
|
|
HALASSERT(modesIndex < ia->cols);
|
|
for (i = 0; i < ia->rows; i++) {
|
|
uint32_t reg = HAL_INI_VAL(ia, i, 0);
|
|
uint32_t val = HAL_INI_VAL(ia, i, modesIndex);
|
|
|
|
if (reg == AR_AN_TOP2 && AH5416(ah)->ah_need_an_top2_fixup)
|
|
val &= ~AR_AN_TOP2_PWDCLKIND;
|
|
|
|
OS_REG_WRITE(ah, reg, val);
|
|
|
|
/* Analog shift register delay seems needed for Merlin - PR kern/154220 */
|
|
if (reg >= 0x7800 && reg < 0x7900)
|
|
OS_DELAY(100);
|
|
|
|
DMA_YIELD(regWrites);
|
|
}
|
|
|
|
if (AR_SREV_MERLIN_20_OR_LATER(ah)) {
|
|
regWrites = ath_hal_ini_write(ah, &AH9280(ah)->ah_ini_rxgain,
|
|
modesIndex, regWrites);
|
|
regWrites = ath_hal_ini_write(ah, &AH9280(ah)->ah_ini_txgain,
|
|
modesIndex, regWrites);
|
|
}
|
|
/* XXX Merlin 100us delay for shift registers */
|
|
regWrites = ath_hal_ini_write(ah, &AH5212(ah)->ah_ini_common,
|
|
1, regWrites);
|
|
|
|
if (AR_SREV_MERLIN_20(ah) && IS_5GHZ_FAST_CLOCK_EN(ah, chan)) {
|
|
/* 5GHz channels w/ Fast Clock use different modal values */
|
|
regWrites = ath_hal_ini_write(ah, &AH9280(ah)->ah_ini_xmodes,
|
|
modesIndex, regWrites);
|
|
}
|
|
}
|
|
|
|
#define AR_BASE_FREQ_2GHZ 2300
|
|
#define AR_BASE_FREQ_5GHZ 4900
|
|
#define AR_SPUR_FEEQ_BOUND_HT40 19
|
|
#define AR_SPUR_FEEQ_BOUND_HT20 10
|
|
|
|
void
|
|
ar9280SpurMitigate(struct ath_hal *ah, const struct ieee80211_channel *chan)
|
|
{
|
|
static const int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
|
|
AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60 };
|
|
static const int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
|
|
AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60 };
|
|
static int inc[4] = { 0, 100, 0, 0 };
|
|
|
|
int bb_spur = AR_NO_SPUR;
|
|
int freq;
|
|
int bin, cur_bin;
|
|
int bb_spur_off, spur_subchannel_sd;
|
|
int spur_freq_sd;
|
|
int spur_delta_phase;
|
|
int denominator;
|
|
int upper, lower, cur_vit_mask;
|
|
int tmp, newVal;
|
|
int i;
|
|
CHAN_CENTERS centers;
|
|
|
|
int8_t mask_m[123];
|
|
int8_t mask_p[123];
|
|
int8_t mask_amt;
|
|
int tmp_mask;
|
|
int cur_bb_spur;
|
|
HAL_BOOL is2GHz = IEEE80211_IS_CHAN_2GHZ(chan);
|
|
|
|
OS_MEMZERO(&mask_m, sizeof(int8_t) * 123);
|
|
OS_MEMZERO(&mask_p, sizeof(int8_t) * 123);
|
|
|
|
ar5416GetChannelCenters(ah, chan, ¢ers);
|
|
freq = centers.synth_center;
|
|
|
|
/*
|
|
* Need to verify range +/- 9.38 for static ht20 and +/- 18.75 for ht40,
|
|
* otherwise spur is out-of-band and can be ignored.
|
|
*/
|
|
for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) {
|
|
cur_bb_spur = ath_hal_getSpurChan(ah, i, is2GHz);
|
|
/* Get actual spur freq in MHz from EEPROM read value */
|
|
if (is2GHz) {
|
|
cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ;
|
|
} else {
|
|
cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ;
|
|
}
|
|
|
|
if (AR_NO_SPUR == cur_bb_spur)
|
|
break;
|
|
cur_bb_spur = cur_bb_spur - freq;
|
|
|
|
if (IEEE80211_IS_CHAN_HT40(chan)) {
|
|
if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) &&
|
|
(cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) {
|
|
bb_spur = cur_bb_spur;
|
|
break;
|
|
}
|
|
} else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) &&
|
|
(cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) {
|
|
bb_spur = cur_bb_spur;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (AR_NO_SPUR == bb_spur) {
|
|
#if 1
|
|
/*
|
|
* MRC CCK can interfere with beacon detection and cause deaf/mute.
|
|
* Disable MRC CCK for now.
|
|
*/
|
|
OS_REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
|
|
#else
|
|
/* Enable MRC CCK if no spur is found in this channel. */
|
|
OS_REG_SET_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
|
|
#endif
|
|
return;
|
|
} else {
|
|
/*
|
|
* For Merlin, spur can break CCK MRC algorithm. Disable CCK MRC if spur
|
|
* is found in this channel.
|
|
*/
|
|
OS_REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK, AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
|
|
}
|
|
|
|
bin = bb_spur * 320;
|
|
|
|
tmp = OS_REG_READ(ah, AR_PHY_TIMING_CTRL4_CHAIN(0));
|
|
|
|
newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
|
|
AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
|
|
AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
|
|
AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
|
|
OS_REG_WRITE(ah, AR_PHY_TIMING_CTRL4_CHAIN(0), newVal);
|
|
|
|
newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
|
|
AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
|
|
AR_PHY_SPUR_REG_MASK_RATE_SELECT |
|
|
AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
|
|
SM(AR5416_SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
|
|
OS_REG_WRITE(ah, AR_PHY_SPUR_REG, newVal);
|
|
|
|
/* Pick control or extn channel to cancel the spur */
|
|
if (IEEE80211_IS_CHAN_HT40(chan)) {
|
|
if (bb_spur < 0) {
|
|
spur_subchannel_sd = 1;
|
|
bb_spur_off = bb_spur + 10;
|
|
} else {
|
|
spur_subchannel_sd = 0;
|
|
bb_spur_off = bb_spur - 10;
|
|
}
|
|
} else {
|
|
spur_subchannel_sd = 0;
|
|
bb_spur_off = bb_spur;
|
|
}
|
|
|
|
/*
|
|
* spur_delta_phase = bb_spur/40 * 2**21 for static ht20,
|
|
* /80 for dyn2040.
|
|
*/
|
|
if (IEEE80211_IS_CHAN_HT40(chan))
|
|
spur_delta_phase = ((bb_spur * 262144) / 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
|
|
else
|
|
spur_delta_phase = ((bb_spur * 524288) / 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
|
|
|
|
/*
|
|
* in 11A mode the denominator of spur_freq_sd should be 40 and
|
|
* it should be 44 in 11G
|
|
*/
|
|
denominator = IEEE80211_IS_CHAN_2GHZ(chan) ? 44 : 40;
|
|
spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff;
|
|
|
|
newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
|
|
SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
|
|
SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
|
|
OS_REG_WRITE(ah, AR_PHY_TIMING11, newVal);
|
|
|
|
/* Choose to cancel between control and extension channels */
|
|
newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S;
|
|
OS_REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal);
|
|
|
|
/*
|
|
* ============================================
|
|
* Set Pilot and Channel Masks
|
|
*
|
|
* pilot mask 1 [31:0] = +6..-26, no 0 bin
|
|
* pilot mask 2 [19:0] = +26..+7
|
|
*
|
|
* channel mask 1 [31:0] = +6..-26, no 0 bin
|
|
* channel mask 2 [19:0] = +26..+7
|
|
*/
|
|
cur_bin = -6000;
|
|
upper = bin + 100;
|
|
lower = bin - 100;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
int pilot_mask = 0;
|
|
int chan_mask = 0;
|
|
int bp = 0;
|
|
for (bp = 0; bp < 30; bp++) {
|
|
if ((cur_bin > lower) && (cur_bin < upper)) {
|
|
pilot_mask = pilot_mask | 0x1 << bp;
|
|
chan_mask = chan_mask | 0x1 << bp;
|
|
}
|
|
cur_bin += 100;
|
|
}
|
|
cur_bin += inc[i];
|
|
OS_REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
|
|
OS_REG_WRITE(ah, chan_mask_reg[i], chan_mask);
|
|
}
|
|
|
|
/* =================================================
|
|
* viterbi mask 1 based on channel magnitude
|
|
* four levels 0-3
|
|
* - mask (-27 to 27) (reg 64,0x9900 to 67,0x990c)
|
|
* [1 2 2 1] for -9.6 or [1 2 1] for +16
|
|
* - enable_mask_ppm, all bins move with freq
|
|
*
|
|
* - mask_select, 8 bits for rates (reg 67,0x990c)
|
|
* - mask_rate_cntl, 8 bits for rates (reg 67,0x990c)
|
|
* choose which mask to use mask or mask2
|
|
*/
|
|
|
|
/*
|
|
* viterbi mask 2 2nd set for per data rate puncturing
|
|
* four levels 0-3
|
|
* - mask_select, 8 bits for rates (reg 67)
|
|
* - mask (-27 to 27) (reg 98,0x9988 to 101,0x9994)
|
|
* [1 2 2 1] for -9.6 or [1 2 1] for +16
|
|
*/
|
|
cur_vit_mask = 6100;
|
|
upper = bin + 120;
|
|
lower = bin - 120;
|
|
|
|
for (i = 0; i < 123; i++) {
|
|
if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
|
|
if ((abs(cur_vit_mask - bin)) < 75) {
|
|
mask_amt = 1;
|
|
} else {
|
|
mask_amt = 0;
|
|
}
|
|
if (cur_vit_mask < 0) {
|
|
mask_m[abs(cur_vit_mask / 100)] = mask_amt;
|
|
} else {
|
|
mask_p[cur_vit_mask / 100] = mask_amt;
|
|
}
|
|
}
|
|
cur_vit_mask -= 100;
|
|
}
|
|
|
|
tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
|
|
| (mask_m[48] << 26) | (mask_m[49] << 24)
|
|
| (mask_m[50] << 22) | (mask_m[51] << 20)
|
|
| (mask_m[52] << 18) | (mask_m[53] << 16)
|
|
| (mask_m[54] << 14) | (mask_m[55] << 12)
|
|
| (mask_m[56] << 10) | (mask_m[57] << 8)
|
|
| (mask_m[58] << 6) | (mask_m[59] << 4)
|
|
| (mask_m[60] << 2) | (mask_m[61] << 0);
|
|
OS_REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
|
|
OS_REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
|
|
|
|
tmp_mask = (mask_m[31] << 28)
|
|
| (mask_m[32] << 26) | (mask_m[33] << 24)
|
|
| (mask_m[34] << 22) | (mask_m[35] << 20)
|
|
| (mask_m[36] << 18) | (mask_m[37] << 16)
|
|
| (mask_m[48] << 14) | (mask_m[39] << 12)
|
|
| (mask_m[40] << 10) | (mask_m[41] << 8)
|
|
| (mask_m[42] << 6) | (mask_m[43] << 4)
|
|
| (mask_m[44] << 2) | (mask_m[45] << 0);
|
|
OS_REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
|
|
OS_REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
|
|
|
|
tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
|
|
| (mask_m[18] << 26) | (mask_m[18] << 24)
|
|
| (mask_m[20] << 22) | (mask_m[20] << 20)
|
|
| (mask_m[22] << 18) | (mask_m[22] << 16)
|
|
| (mask_m[24] << 14) | (mask_m[24] << 12)
|
|
| (mask_m[25] << 10) | (mask_m[26] << 8)
|
|
| (mask_m[27] << 6) | (mask_m[28] << 4)
|
|
| (mask_m[29] << 2) | (mask_m[30] << 0);
|
|
OS_REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
|
|
OS_REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
|
|
|
|
tmp_mask = (mask_m[ 0] << 30) | (mask_m[ 1] << 28)
|
|
| (mask_m[ 2] << 26) | (mask_m[ 3] << 24)
|
|
| (mask_m[ 4] << 22) | (mask_m[ 5] << 20)
|
|
| (mask_m[ 6] << 18) | (mask_m[ 7] << 16)
|
|
| (mask_m[ 8] << 14) | (mask_m[ 9] << 12)
|
|
| (mask_m[10] << 10) | (mask_m[11] << 8)
|
|
| (mask_m[12] << 6) | (mask_m[13] << 4)
|
|
| (mask_m[14] << 2) | (mask_m[15] << 0);
|
|
OS_REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
|
|
OS_REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
|
|
|
|
tmp_mask = (mask_p[15] << 28)
|
|
| (mask_p[14] << 26) | (mask_p[13] << 24)
|
|
| (mask_p[12] << 22) | (mask_p[11] << 20)
|
|
| (mask_p[10] << 18) | (mask_p[ 9] << 16)
|
|
| (mask_p[ 8] << 14) | (mask_p[ 7] << 12)
|
|
| (mask_p[ 6] << 10) | (mask_p[ 5] << 8)
|
|
| (mask_p[ 4] << 6) | (mask_p[ 3] << 4)
|
|
| (mask_p[ 2] << 2) | (mask_p[ 1] << 0);
|
|
OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
|
|
OS_REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
|
|
|
|
tmp_mask = (mask_p[30] << 28)
|
|
| (mask_p[29] << 26) | (mask_p[28] << 24)
|
|
| (mask_p[27] << 22) | (mask_p[26] << 20)
|
|
| (mask_p[25] << 18) | (mask_p[24] << 16)
|
|
| (mask_p[23] << 14) | (mask_p[22] << 12)
|
|
| (mask_p[21] << 10) | (mask_p[20] << 8)
|
|
| (mask_p[19] << 6) | (mask_p[18] << 4)
|
|
| (mask_p[17] << 2) | (mask_p[16] << 0);
|
|
OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
|
|
OS_REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
|
|
|
|
tmp_mask = (mask_p[45] << 28)
|
|
| (mask_p[44] << 26) | (mask_p[43] << 24)
|
|
| (mask_p[42] << 22) | (mask_p[41] << 20)
|
|
| (mask_p[40] << 18) | (mask_p[39] << 16)
|
|
| (mask_p[38] << 14) | (mask_p[37] << 12)
|
|
| (mask_p[36] << 10) | (mask_p[35] << 8)
|
|
| (mask_p[34] << 6) | (mask_p[33] << 4)
|
|
| (mask_p[32] << 2) | (mask_p[31] << 0);
|
|
OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
|
|
OS_REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
|
|
|
|
tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
|
|
| (mask_p[59] << 26) | (mask_p[58] << 24)
|
|
| (mask_p[57] << 22) | (mask_p[56] << 20)
|
|
| (mask_p[55] << 18) | (mask_p[54] << 16)
|
|
| (mask_p[53] << 14) | (mask_p[52] << 12)
|
|
| (mask_p[51] << 10) | (mask_p[50] << 8)
|
|
| (mask_p[49] << 6) | (mask_p[48] << 4)
|
|
| (mask_p[47] << 2) | (mask_p[46] << 0);
|
|
OS_REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
|
|
OS_REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
|
|
}
|
|
|
|
/*
|
|
* Fill all software cached or static hardware state information.
|
|
* Return failure if capabilities are to come from EEPROM and
|
|
* cannot be read.
|
|
*/
|
|
static HAL_BOOL
|
|
ar9280FillCapabilityInfo(struct ath_hal *ah)
|
|
{
|
|
HAL_CAPABILITIES *pCap = &AH_PRIVATE(ah)->ah_caps;
|
|
|
|
if (!ar5416FillCapabilityInfo(ah))
|
|
return AH_FALSE;
|
|
pCap->halNumGpioPins = 10;
|
|
pCap->halWowSupport = AH_TRUE;
|
|
pCap->halWowMatchPatternExact = AH_TRUE;
|
|
#if 0
|
|
pCap->halWowMatchPatternDword = AH_TRUE;
|
|
#endif
|
|
pCap->halCSTSupport = AH_TRUE;
|
|
pCap->halRifsRxSupport = AH_TRUE;
|
|
pCap->halRifsTxSupport = AH_TRUE;
|
|
pCap->halRtsAggrLimit = 64*1024; /* 802.11n max */
|
|
pCap->halExtChanDfsSupport = AH_TRUE;
|
|
pCap->halUseCombinedRadarRssi = AH_TRUE;
|
|
#if 0
|
|
/* XXX bluetooth */
|
|
pCap->halBtCoexSupport = AH_TRUE;
|
|
#endif
|
|
pCap->halAutoSleepSupport = AH_FALSE; /* XXX? */
|
|
pCap->hal4kbSplitTransSupport = AH_FALSE;
|
|
/* Disable this so Block-ACK works correctly */
|
|
pCap->halHasRxSelfLinkedTail = AH_FALSE;
|
|
pCap->halMbssidAggrSupport = AH_TRUE;
|
|
pCap->hal4AddrAggrSupport = AH_TRUE;
|
|
pCap->halSpectralScanSupport = AH_TRUE;
|
|
|
|
if (AR_SREV_MERLIN_20(ah)) {
|
|
pCap->halPSPollBroken = AH_FALSE;
|
|
/*
|
|
* This just enables the support; it doesn't
|
|
* state 5ghz fast clock will always be used.
|
|
*/
|
|
pCap->halSupportsFastClock5GHz = AH_TRUE;
|
|
}
|
|
pCap->halRxStbcSupport = 1;
|
|
pCap->halTxStbcSupport = 1;
|
|
pCap->halEnhancedDfsSupport = AH_TRUE;
|
|
|
|
return AH_TRUE;
|
|
}
|
|
|
|
/*
|
|
* This has been disabled - having the HAL flip chainmasks on/off
|
|
* when attempting to implement 11n disrupts things. For now, just
|
|
* leave this flipped off and worry about implementing TX diversity
|
|
* for legacy and MCS0-7 when 11n is fully functioning.
|
|
*/
|
|
HAL_BOOL
|
|
ar9280SetAntennaSwitch(struct ath_hal *ah, HAL_ANT_SETTING settings)
|
|
{
|
|
#define ANTENNA0_CHAINMASK 0x1
|
|
#define ANTENNA1_CHAINMASK 0x2
|
|
#if 0
|
|
struct ath_hal_5416 *ahp = AH5416(ah);
|
|
|
|
/* Antenna selection is done by setting the tx/rx chainmasks approp. */
|
|
switch (settings) {
|
|
case HAL_ANT_FIXED_A:
|
|
/* Enable first antenna only */
|
|
ahp->ah_tx_chainmask = ANTENNA0_CHAINMASK;
|
|
ahp->ah_rx_chainmask = ANTENNA0_CHAINMASK;
|
|
break;
|
|
case HAL_ANT_FIXED_B:
|
|
/* Enable second antenna only, after checking capability */
|
|
if (AH_PRIVATE(ah)->ah_caps.halTxChainMask > ANTENNA1_CHAINMASK)
|
|
ahp->ah_tx_chainmask = ANTENNA1_CHAINMASK;
|
|
ahp->ah_rx_chainmask = ANTENNA1_CHAINMASK;
|
|
break;
|
|
case HAL_ANT_VARIABLE:
|
|
/* Restore original chainmask settings */
|
|
/* XXX */
|
|
ahp->ah_tx_chainmask = AR9280_DEFAULT_TXCHAINMASK;
|
|
ahp->ah_rx_chainmask = AR9280_DEFAULT_RXCHAINMASK;
|
|
break;
|
|
}
|
|
|
|
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: settings=%d, tx/rx chainmask=%d/%d\n",
|
|
__func__, settings, ahp->ah_tx_chainmask, ahp->ah_rx_chainmask);
|
|
|
|
#endif
|
|
return AH_TRUE;
|
|
#undef ANTENNA0_CHAINMASK
|
|
#undef ANTENNA1_CHAINMASK
|
|
}
|
|
|
|
static const char*
|
|
ar9280Probe(uint16_t vendorid, uint16_t devid)
|
|
{
|
|
if (vendorid == ATHEROS_VENDOR_ID) {
|
|
if (devid == AR9280_DEVID_PCI)
|
|
return "Atheros 9220";
|
|
if (devid == AR9280_DEVID_PCIE)
|
|
return "Atheros 9280";
|
|
}
|
|
return AH_NULL;
|
|
}
|
|
AH_CHIP(AR9280, ar9280Probe, ar9280Attach);
|