d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-skq/sys/dev
History
Warner Losh 2a08b0b7a1 Add a safety-belt. If the identified disk has 0 blocks, don't attach 
it.  This can happen in some cases when plugging in SD/SmartCard PC
Cards with empty slots.  It is better to detect this bogosity, and
refuse to attach rather than panic with a division by zero (in one of
many places) down stream.
2010-07-04 07:42:52 +00:00
..
aac
Use enums in the aac_command_status_table rather than duplicating the same
2010-04-13 12:10:55 +00:00
acpi_support
Import the acpi_aibs(4) driver written by Constantine A. Murenin.
2010-06-25 15:32:46 +00:00
acpica
Add "legacy route" support to HPET driver. When enabled, this mode makes
2010-06-22 19:42:27 +00:00
adb
…
adlink
…
advansys
…
ae
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
age
With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify
2010-04-19 22:10:40 +00:00
agp
Add a missing linefeed
2010-06-19 08:42:29 +00:00
aha
…
ahb
…
ahci
Disable NCQ and PMP support for VIA VT8251 AHCI. It was reported to be
2010-06-08 10:03:08 +00:00
aic
…
aic7xxx
…
alc
With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify
2010-04-19 22:10:40 +00:00
ale
It seems ale(4) controllers do not like to see TCP payload in the
2010-04-26 21:08:15 +00:00
amd
…
amdsbwd
amdsbwd: fix nonsensical timeout calculations
2010-05-31 09:07:23 +00:00
amdtemp
…
amr
…
an
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
arcmsr
…
asmc
…
asr
…
ata
Add a safety-belt. If the identified disk has 0 blocks, don't attach
2010-07-04 07:42:52 +00:00
ath
Fix typo introduced in previous revision.
2010-06-27 10:17:11 +00:00
atkbdc
On certain chipsets AT keyboard controller isn't present and is
2010-04-29 06:16:00 +00:00
auxio
…
bce
Add a fastpath to allocate from packet zone when using m_getjcl.
2010-05-07 22:09:17 +00:00
bfe
…
bge
Remove unused macros.
2010-06-08 17:28:28 +00:00
bktr
Use standard types in preference to BSD types so that these header files
2010-03-28 00:10:09 +00:00
bm
…
buslogic
…
bwi
Initializes the ratectl for a node when the state is changed to RUN.
2010-06-29 21:56:42 +00:00
bwn
- fixes a bug that it didn't initialize the ratectl after association;
2010-05-15 21:18:15 +00:00
cardbus
…
cas
Avoid possible NULL-dereferences.
2010-06-03 12:09:02 +00:00
ce
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cfe
…
cfi
…
ciss
Initialize the callout structure earlier in attach before calling any
2010-04-28 18:49:45 +00:00
cm
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cmx
…
coretemp
…
cp
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cpuctl
…
cpufreq
…
cs
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ct
…
ctau
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cx
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cxgb
Catch up with the page and page queues locking changes.
2010-06-18 23:14:16 +00:00
cy
…
dc
…
dcons
…
de
…
digi
…
dpms
…
dpt
…
drm
Push down the acquisition of the page queues lock into vm_page_unwire().
2010-05-05 07:40:54 +00:00
e1000
OK, I was a bit sleep this morning and checked in
2010-06-30 21:05:51 +00:00
ed
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
eisa
…
en
…
ep
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
esp
Include <machine/ofw_machdep.h> for OF_getscsinitid().
2010-05-10 20:02:39 +00:00
et
…
ex
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
exca
…
fatm
…
fb
Use M_WAITOK for VESA BIOS initialization consistently.
2010-06-23 23:34:56 +00:00
fdc
Fix a regression from r200554, which broke fdc(4) attachment to acpi(4).
2010-05-30 03:45:41 +00:00
fdt
Initial FDT infrastructure elements for ARM.
2010-06-13 13:12:52 +00:00
fe
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
firewire
Cast a bus_size_t to a (size_t) to use %zd specifier. Not quite the
2010-03-29 17:24:23 +00:00
flash
…
fxp
If controller received bad frames make sure to update newly added
2010-05-14 17:39:28 +00:00
gem
…
glxsb
…
hatm
…
hifn
…
hme
…
hptiop
Report transport type in XPT_PATH_INQ.
2010-06-19 13:41:17 +00:00
hptmv
Report transport type in XPT_PATH_INQ.
2010-06-19 13:42:14 +00:00
hptrr
…
hwpmc
Convert pm_runcount to int to correctly check for negative value.
2010-06-05 23:05:08 +00:00
ic
…
ichsmb
…
ichwd
…
ida
…
ie
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ieee488
…
if_ndis
…
iicbus
Revert changes accidentally committed as part of r209298.
2010-06-18 14:20:54 +00:00
iir
…
io
- Extract the IODEV_PIO interface from ia64 and make it MI.
2010-04-28 15:38:01 +00:00
ipmi
…
ips
…
ipw
Enable 5.5 and 11Mbit TX rates.
2010-05-11 17:14:17 +00:00
iscsi/initiator
…
isp
Don't pass a buffer directly as a printflike format string.
2010-06-10 19:38:07 +00:00
ispfw
…
iwi
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
iwn
Fix TX retry rate handling. tx->linkq is an index to a rate table
2010-06-14 18:26:10 +00:00
ixgb
…
ixgbe
Fix build
2010-07-01 05:03:24 +00:00
jme
…
joy
…
kbd
…
kbdmux
…
ksyms
…
le
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
led
…
lge
…
lindev
…
lmc
…
malo
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
mc146818
…
mca
…
mcd
…
md
Eliminate unnecessary page queues locking.
2010-06-15 18:37:31 +00:00
mem
…
mfi
…
mge
Convert Marvell ARM platforms to FDT convention.
2010-06-13 13:28:53 +00:00
mii
Add Marvell PHYG65G Gigabit PHY which is found on 88E8059 Yukon Optima.
2010-04-30 19:01:55 +00:00
mk48txx
…
mlx
…
mly
…
mmc
Report relative card address to NewBus as location string.
2010-05-23 09:44:48 +00:00
mn
…
mpt
Change the mpt driver to allow larger I/O sizes.
2010-06-29 22:07:53 +00:00
mse
…
msk
When VLAN hardware tagging is disabled, make sure to disable VLAN
2010-05-04 22:24:19 +00:00
mvs
Plug memory leak to silent Coverity. Error is still not really handled.
2010-06-05 08:21:18 +00:00
mwl
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
mxge
Add interrupt descriptions for mxge's msi-x vectors
2010-05-21 15:57:24 +00:00
my
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ncv
…
nfe
With r206844, CSUM_TCP is also set for CSUM_TSO case. Modify
2010-04-19 22:10:40 +00:00
nge
…
nmdm
…
nsp
…
null
…
nve
…
nvram
…
nxge
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ofw
Provide for multiple, cascaded PICs on PowerPC systems, and extend the
2010-06-18 14:06:27 +00:00
patm
…
pbio
…
pccard
…
pccbb
…
pcf
…
pci
Virtualize pci_remap_msi_irq() call from general MSI code. It allows MSI
2010-06-14 07:10:37 +00:00
pcn
…
pdq
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
powermac_nvram
…
ppbus
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ppc
…
pst
…
pty
…
puc
Add support for the Perle Speed4 LE.
2010-05-20 13:16:42 +00:00
quicc
Remove a soft member which was never used.
2010-05-02 19:05:57 +00:00
ral
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
random
Use the fpu_kern_enter() interface to properly separate usermode FPU
2010-06-05 16:00:53 +00:00
rc
…
re
Don't change PCIe maximum read request size to 2048 on RTL810x
2010-05-07 23:05:27 +00:00
rndtest
…
rp
…
safe
…
sbni
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
scc
…
scd
…
sdhci
…
sec
…
sf
…
sge
Don't blindly set IFF_DRV_OACTIVE when sge_encap() fails. If there
2010-06-04 17:11:33 +00:00
si
…
siba
…
siis
Plug memory leak to silent Coverity. Error is still not really handled.
2010-06-05 08:16:21 +00:00
sio
…
sis
It's not necessary to reset the chip every time an input overflow event
2010-04-20 19:30:12 +00:00
sk
…
smbus
…
smc
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
sn
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
snc
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
snp
…
sound
- fix for USB audio devices which use the 7-byte endpoint descriptor instead of
2010-06-22 21:16:18 +00:00
speaker
…
spibus
…
ste
…
stg
…
stge
…
streams
…
sym
- On sparc64 obtain the initiator ID from the Open Firmware device tree
2010-04-27 18:05:33 +00:00
syscons
Suspend screen updates when the video controller is powered down.
2010-05-22 07:35:17 +00:00
tdfx
…
ti
Neither the page lock nor the page queues lock is required to unwire and
2010-05-03 15:51:59 +00:00
tl
…
trm
…
tsec
…
twa
Remove an unused comment.
2010-06-17 19:48:03 +00:00
twe
…
tx
…
txp
…
uart
Convert Marvell ARM platforms to FDT convention.
2010-06-13 13:28:53 +00:00
ubsec
Cast the bus_size_t to a intmax_t rather than assuming type-punning to
2010-03-29 17:26:24 +00:00
usb
Add new device id.
2010-06-22 21:08:45 +00:00
utopia
…
vge
…
vkbd
…
vr
…
vx
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
watchdog
…
wb
…
wds
…
wi
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
wl
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
wpi
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
xe
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
xen
A number of netfront fixes and stability improvements:
2010-06-08 03:13:26 +00:00
xl
…