freebsd-skq/sys/i386/conf/LINT
Andreas Schulz 2ac8be827f Reviewed by:
Delete the hints to the sg driver. This thing was never finished and
has now been beaten by the sea driver.
1994-09-05 22:32:42 +00:00

211 lines
7.4 KiB
Plaintext

#
# LINT -- config file for checking all the sources, tries to pull in
# as much of the source tree as it can.
#
# This kernel is NOT MEANT to be runnable!
#
# $Id: LINT,v 1.75 1994/08/31 06:17:21 davidg Exp $
#
machine "i386"
cpu "I386_CPU"
cpu "I486_CPU"
cpu "I586_CPU"
ident LINT
timezone 8 dst
maxusers 10
maxfdescs 2048 #Max file descriptors per process
options MATH_EMULATE #Support for x87 emulation
# Do not use in binary distributions
#options GPL_MATH_EMULATE #Support for x87 emualtion via
#new math emulator
config kernel root on wd0 swap on wd0 and sd0 dumps on wd0
#
# options that appear as inline #ifdef's
#
options "COM_MULTIPORT" #Multiport support in sys/isa/sio.c
options "FIFO_TRIGGER=FIFO_TRIGGER_1" #Use this fifo value in sio.c
options "COMPAT_43" #compatible with BSD 4.3
options "SYMTAB_SPACE=113498" #This kernel needs LOTS of symtable
options GATEWAY #internetwork gateway
options KTRACE #kernel tracing
options "NCONS=8" #number of syscons virtual consoles
options "FAT_CURSOR" #block cursor in syscons or pccons
options "STAR_SAVER" #syscons "stars" screen saver
options "FADE_SAVER" #syscons "fade" screen saver
options "SNAKE_SAVER" #syscons "snake" screen saver
options "BLANK_SAVER" #syscons "blank" screen saver
#options ALLOW_CONFLICT_IOADDR #no IO addr conflict checks (PS/2 mice)
#options ALLOW_CONFLICT_IRQ #no IRQ conflict checks (mport serial)
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options "TCP_COMPAT_42" #tcp/ip compatible with 4.2
# ^^^ NOT RECOMMENDED FOR NORMAL USE
options UCONSOLE #x console support
options DECBIT #here because clnp.h wanted it here
#support for CLNP ``congestion
#experienced'' bit in ISO-TP
options TROLL #CLNP network error simulator
options ICMPPRINTFS #ICMP packet dump by printf()
options NSERRPRINTFS #ditto for XNS Error protocol
#^^above three NOT RECOMMENTED
options MACHVMCOMPAT #support for Mach-style vm calls
options IPBROADCASTECHO=1 #send reply to broadcast pings
options IPMASKAGENT=1 #send reply to icmp mask requests
options TPCONS #support X.25 network-layer service
options USER_LDT #allow user-level control of i386 ldt
# See /sys/i386/doc/sound.doc for information about EXCLUDE options for
# the sound drivers.
# Multicast support.
options MULTICAST # Multicast code
options MROUTING # Multicast routing
#
# options that are in sys/conf/files
#
options "CD9660" #ISO 9660 filesystem
options FDESC #File descriptor filesystem
options FFS #Fast filesystem
options KERNFS #Kernel filesystem
options LFS #Log filesystem
options MFS #Memory File System
options NFS #Network File System
options NULLFS #NULL filesystem
options PORTAL #Portal filesystem
options PROCFS #Process filesystem
options UMAPFS #UID map filesystem
options UNION #Union filesystem
pseudo-device bpfilter 4 #berkeley packet filter
options CCITT
device cd0 #Only need one of these, the code dynamically grows
device ch0
options DDB #Kernel debugger
options EON
pseudo-device ether
options FIFO
#pseudo-device imp
options INET #Internet communications protocols
options ISO
options LKM #Loadable kernel modules
pseudo-device loop #Network loop back device
options NS #Xerox NS communications protocols
options NSIP #XNS over IP
pseudo-device ppp 2 #Point-to-point protocol
pseudo-device pty 4 #Pseudo ttys
options QUOTA #enable disk quotas
options RMP #HP remote maint protocol
controller scbus0
device sd0
device sd1
device sd2
device sd3
pseudo-device sl 2
device st0
device st1
options SYSVSHM
options "SHMMAXPGS=64" # 256Kb of sharable memory
options SYSVSEM
options SYSVMSG
#pseudo-device tb #tablet line discipline.
options TPIP # ISO TP class 4 over IP
#pseudo-device tun
device uk0 #unknown scsi devices
#
# options that are in sys/i386/conf/files.i386
#
#This is needed here so the isa? below will work
controller isa0
# driver for the Adaptec 154x SCSI cards.
controller aha0 at isa? port "IO_AHA0" bio irq 11 drq 5 vector ahaintr
# driver for the Adaptec 174x SCSI cards.
controller ahb0 at isa? bio irq 11 vector ahbintr
# driver for the Bustek 742.
controller bt0 at isa? port "IO_BT0" bio irq 12 vector btintr
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
disk fd1 at fdc0 drive 1
tape ft0 at fdc0 drive 2
# driver for the Western Digital and SMCC WD80xx cards, for the Novell
# NE1000/2000 card and the 3COM 3C503 card.
device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
# driver for the AT&T Starlan card.
device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
#driver for the Isolan AT 4114-0 and the Isolink 4110 ethernet card.
device is0 at isa? port 0x280 net irq 10 drq 7 vector isintr
#device ix0 at isa? port 0x320 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
# driver for the Etherlink III ( 3C509 ) card, beta version.
device ep0 at isa? port 0x300 net irq 10 vector epintr
#driver for the 3c501
device el0 at isa? port 0x300 net irq 9 vector elintr
#special cased above:
#controller isa0
# interruptless parallel printer port driver
device lpa0 at isa? port "IO_LPT1" tty
device lpa1 at isa? port "IO_LPT2" tty
# interrupt driven parallel printer port driver
device lpt0 at isa? port "IO_LPT3" tty irq 7 vector lptintr
# Driver for Mitsumi CD-ROM players
device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
# Driver for Logitech and ATI inport bus mice
device mse0 at isa? port 0x23c tty irq 5 vector mseintr
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
# Driver for ProAudioSpectrum SCSI, on cards with NCR 5380 chips.
# The four units correspond to the HW-jumpers. No intr, No DMA, very slow.
device pas0 at isa? port 0x1f88
device pas1 at isa? port 0x1f84
device pas2 at isa? port 0x1f8c
device pas3 at isa? port 0x1e88
device pc0 at isa? port "IO_KBD" tty irq 1 vector pcrint
#only one of pc0 or sc0 allowed
#device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr
device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr
#PS/2 mouse driver (must follow pc0 or sc0 if enabled). Also enable
#ALLOW_CONFLICT_IOADDR option (see above) if you want to use this.
#device psm0 at isa? port "IO_KBD" tty irq 12 vector psmintr
pseudo-device speaker
#tw device-driver
controller uha0 at isa? port "IO_UHA0" bio irq 14 drq 5 vector uhaintr
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
disk wd1 at wdc0 drive 1
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
disk wd2 at wdc1 drive 0
disk wd3 at wdc1 drive 1
device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
# Various sound card drivers.
# See /sys/doc/sound.doc for more information.
device snd5 at isa? port 0x330 irq 6 vector mpuintr
device snd4 at isa? port 0x220 irq 15 drq 6 vector gusintr
device snd3 at isa? port 0x388 irq 10 drq 6 vector pasintr
device snd2 at isa? port 0x220 irq 7 drq 1 vector sbintr
device snd6 at isa? port 0x220 irq 7 drq 5 vector sbintr
device snd7 at isa? port 0x300
device snd1 at isa? port 0x388
# The digital speaker driver (/dev/pcaudio).
device pca0 at isa? tty
# options that have not been resolved yet
pseudo-device log