adrian 592472ed14 Add Atheros AR1111 support to the HAL. ... This seems to probe/attach as an AR9485 and thus nothing else besides adding the device id seems to be required. ath0: <Atheros AR1111> mem 0xf4800000-0xf487ffff irq 19 at device 0.0 on pci5 ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 RX streams; 1 TX streams ath0: AR9485 mac 576.1 RF5110 phy 1926.8 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 The NIC I have here is a 1 antenna, 2GHz only device. Thankyou to Jim Thompson <jim@netgate.com> for the AR1111 NIC. Tested: * AR1111 (pretending not to be an AR9485, but failing miserably); STA mode with powersave. Relnotes: yes Sponsored by: Netgate		2014-05-05 07:58:05 +00:00
..
acpica	Merge ACPICA 20130823.	2013-08-23 23:25:58 +00:00
ath/ath_hal/ar9300	Add Atheros AR1111 support to the HAL.	2014-05-05 07:58:05 +00:00
drm2/radeonkmsfw	drm/radeon: Import the Radeon KMS driver	2013-08-25 19:37:15 +00:00
ipw
iwi
iwn	Add firmware for Intel Centrino Wireless-N 105 devices.	2014-01-11 18:56:48 +00:00
mwl
npe	Remove spurious 8bit chars, turning files into plain ASCII.	2012-01-15 13:23:54 +00:00
ral	Import the latest microcode.h which was used to generate the current	2012-03-14 08:00:33 +00:00
rsu	Realtek's RTL8712 firmware blob needed by the upcoming rsu(4) driver.	2013-07-29 06:53:42 +00:00
run	Update firmware for run(4) to version 0.33.	2013-10-18 07:40:50 +00:00
uath
urtwn	Add preliminary support for the Realtek RTL8188EUS and RTL8188ETV chipsets.	2014-04-25 08:01:22 +00:00
wpi	Update firmware for wpi(4) from version 2.14.4 to 15.32.2.9.	2010-12-19 11:37:44 +00:00