d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2cbd12c3b8
freebsd-skq/sys/dev/amdsbwd/amdsbwd.c
avg 79db40ce37 amdsbwd: fix reboot status reporting 
Originally, I overlooked that PMIO register 0xc0 has a dual personality.
It can either be S5/Reset Status register or Misc. Fix register (aka
debug status register).  The mode is controlled by bit 2 in PMIO
register 0xc4.  Apparently there are register programming requirements
for the second personality, so many BIOSes leave the register, after
programming it, in that mode.  So, we need to switch the register to the
correct mode.

Additionally, AMDSB8_WD_RST_STS was defined incorrectly as bit 13 while
it is actually bit 25 (and the register's width is 32 bits, not 16).

With this change I see the following in dmesg after a reset by the
watchdog:
amdsbwd0: ResetStatus = 0x42000000
amdsbwd0: Previous Reset was caused by Watchdog

MFC after:	2 weeks
2018-05-05 05:22:11 +00:00

594 lines
15 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2009 Andriy Gapon <avg@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* This is a driver for watchdog timer present in AMD SB600/SB7xx/SB8xx
* southbridges.
* Please see the following specifications for the descriptions of the
* registers and flags:
* - AMD SB600 Register Reference Guide, Public Version, Rev. 3.03 (SB600 RRG)
* http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/46155_sb600_rrg_pub_3.03.pdf
* - AMD SB700/710/750 Register Reference Guide (RRG)
* http://developer.amd.com/assets/43009_sb7xx_rrg_pub_1.00.pdf
* - AMD SB700/710/750 Register Programming Requirements (RPR)
* http://developer.amd.com/assets/42413_sb7xx_rpr_pub_1.00.pdf
* - AMD SB800-Series Southbridges Register Reference Guide (RRG)
* http://support.amd.com/us/Embedded_TechDocs/45482.pdf
* Please see the following for Watchdog Resource Table specification:
* - Watchdog Timer Hardware Requirements for Windows Server 2003 (WDRT)
* http://www.microsoft.com/whdc/system/sysinternals/watchdog.mspx
* AMD SB600/SB7xx/SB8xx watchdog hardware seems to conform to the above
* specifications, but the table hasn't been spotted in the wild yet.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_amdsbwd.h"
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/systm.h>
#include <sys/sysctl.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <sys/watchdog.h>
#include <dev/pci/pcivar.h>
#include <dev/amdsbwd/amd_chipset.h>
#include <isa/isavar.h>
/*
* Registers in the Watchdog IO space.
* See SB7xx RRG 2.3.4, WDRT.
*/
#define AMDSB_WD_CTRL 0x00
#define AMDSB_WD_RUN 0x01
#define AMDSB_WD_FIRED 0x02
#define AMDSB_WD_SHUTDOWN 0x04
#define AMDSB_WD_DISABLE 0x08
#define AMDSB_WD_RESERVED 0x70
#define AMDSB_WD_RELOAD 0x80
#define AMDSB_WD_COUNT 0x04
#define AMDSB_WD_COUNT_MASK 0xffff
#define AMDSB_WDIO_REG_WIDTH 4
#define amdsbwd_verbose_printf(dev, ...) \
do { \
if (bootverbose) \
device_printf(dev, __VA_ARGS__);\
} while (0)
struct amdsbwd_softc {
device_t dev;
eventhandler_tag ev_tag;
struct resource *res_ctrl;
struct resource *res_count;
int rid_ctrl;
int rid_count;
int ms_per_tick;
int max_ticks;
int active;
unsigned int timeout;
};
static void amdsbwd_identify(driver_t *driver, device_t parent);
static int amdsbwd_probe(device_t dev);
static int amdsbwd_attach(device_t dev);
static int amdsbwd_detach(device_t dev);
static int amdsbwd_suspend(device_t dev);
static int amdsbwd_resume(device_t dev);
static device_method_t amdsbwd_methods[] = {
DEVMETHOD(device_identify, amdsbwd_identify),
DEVMETHOD(device_probe, amdsbwd_probe),
DEVMETHOD(device_attach, amdsbwd_attach),
DEVMETHOD(device_detach, amdsbwd_detach),
DEVMETHOD(device_suspend, amdsbwd_suspend),
DEVMETHOD(device_resume, amdsbwd_resume),
#if 0
DEVMETHOD(device_shutdown, amdsbwd_detach),
#endif
DEVMETHOD_END
};
static devclass_t amdsbwd_devclass;
static driver_t amdsbwd_driver = {
"amdsbwd",
amdsbwd_methods,
sizeof(struct amdsbwd_softc)
};
DRIVER_MODULE(amdsbwd, isa, amdsbwd_driver, amdsbwd_devclass, NULL, NULL);
static uint8_t
pmio_read(struct resource *res, uint8_t reg)
{
bus_write_1(res, 0, reg); /* Index */
return (bus_read_1(res, 1)); /* Data */
}
static void
pmio_write(struct resource *res, uint8_t reg, uint8_t val)
{
bus_write_1(res, 0, reg); /* Index */
bus_write_1(res, 1, val); /* Data */
}
static uint32_t
wdctrl_read(struct amdsbwd_softc *sc)
{
return (bus_read_4(sc->res_ctrl, 0));
}
static void
wdctrl_write(struct amdsbwd_softc *sc, uint32_t val)
{
bus_write_4(sc->res_ctrl, 0, val);
}
static __unused uint32_t
wdcount_read(struct amdsbwd_softc *sc)
{
return (bus_read_4(sc->res_count, 0));
}
static void
wdcount_write(struct amdsbwd_softc *sc, uint32_t val)
{
bus_write_4(sc->res_count, 0, val);
}
static void
amdsbwd_tmr_enable(struct amdsbwd_softc *sc)
{
uint32_t val;
val = wdctrl_read(sc);
val |= AMDSB_WD_RUN;
wdctrl_write(sc, val);
sc->active = 1;
amdsbwd_verbose_printf(sc->dev, "timer enabled\n");
}
static void
amdsbwd_tmr_disable(struct amdsbwd_softc *sc)
{
uint32_t val;
val = wdctrl_read(sc);
val &= ~AMDSB_WD_RUN;
wdctrl_write(sc, val);
sc->active = 0;
amdsbwd_verbose_printf(sc->dev, "timer disabled\n");
}
static void
amdsbwd_tmr_reload(struct amdsbwd_softc *sc)
{
uint32_t val;
val = wdctrl_read(sc);
val |= AMDSB_WD_RELOAD;
wdctrl_write(sc, val);
}
static void
amdsbwd_tmr_set(struct amdsbwd_softc *sc, uint16_t timeout)
{
timeout &= AMDSB_WD_COUNT_MASK;
wdcount_write(sc, timeout);
sc->timeout = timeout;
amdsbwd_verbose_printf(sc->dev, "timeout set to %u ticks\n", timeout);
}
static void
amdsbwd_event(void *arg, unsigned int cmd, int *error)
{
struct amdsbwd_softc *sc = arg;
uint64_t timeout;
if (cmd != 0) {
timeout = 0;
cmd &= WD_INTERVAL;
if (cmd >= WD_TO_1MS) {
timeout = (uint64_t)1 << (cmd - WD_TO_1MS);
timeout = timeout / sc->ms_per_tick;
}
/* For a too short timeout use 1 tick. */
if (timeout == 0)
timeout = 1;
/* For a too long timeout stop the timer. */
if (timeout > sc->max_ticks)
timeout = 0;
} else {
timeout = 0;
}
if (timeout != 0) {
if (timeout != sc->timeout)
amdsbwd_tmr_set(sc, timeout);
if (!sc->active)
amdsbwd_tmr_enable(sc);
amdsbwd_tmr_reload(sc);
*error = 0;
} else {
if (sc->active)
amdsbwd_tmr_disable(sc);
}
}
static void
amdsbwd_identify(driver_t *driver, device_t parent)
{
device_t child;
device_t smb_dev;
if (resource_disabled("amdsbwd", 0))
return;
if (device_find_child(parent, "amdsbwd", -1) != NULL)
return;
/*
* Try to identify SB600/SB7xx by PCI Device ID of SMBus device
* that should be present at bus 0, device 20, function 0.
*/
smb_dev = pci_find_bsf(0, 20, 0);
if (smb_dev == NULL)
return;
if (pci_get_devid(smb_dev) != AMDSB_SMBUS_DEVID &&
pci_get_devid(smb_dev) != AMDFCH_SMBUS_DEVID &&
pci_get_devid(smb_dev) != AMDCZ_SMBUS_DEVID)
return;
child = BUS_ADD_CHILD(parent, ISA_ORDER_SPECULATIVE, "amdsbwd", -1);
if (child == NULL)
device_printf(parent, "add amdsbwd child failed\n");
}
static void
amdsbwd_probe_sb7xx(device_t dev, struct resource *pmres, uint32_t *addr)
{
uint8_t val;
int i;
/* Report cause of previous reset for user's convenience. */
val = pmio_read(pmres, AMDSB_PM_RESET_STATUS0);
if (val != 0)
amdsbwd_verbose_printf(dev, "ResetStatus0 = %#04x\n", val);
val = pmio_read(pmres, AMDSB_PM_RESET_STATUS1);
if (val != 0)
amdsbwd_verbose_printf(dev, "ResetStatus1 = %#04x\n", val);
if ((val & AMDSB_WD_RST_STS) != 0)
device_printf(dev, "Previous Reset was caused by Watchdog\n");
/* Find base address of memory mapped WDT registers. */
for (*addr = 0, i = 0; i < 4; i++) {
*addr <<= 8;
*addr |= pmio_read(pmres, AMDSB_PM_WDT_BASE_MSB - i);
}
*addr &= ~0x07u;
/* Set watchdog timer tick to 1s. */
val = pmio_read(pmres, AMDSB_PM_WDT_CTRL);
val &= ~AMDSB_WDT_RES_MASK;
val |= AMDSB_WDT_RES_1S;
pmio_write(pmres, AMDSB_PM_WDT_CTRL, val);
/* Enable watchdog device (in stopped state). */
val = pmio_read(pmres, AMDSB_PM_WDT_CTRL);
val &= ~AMDSB_WDT_DISABLE;
pmio_write(pmres, AMDSB_PM_WDT_CTRL, val);
/*
* XXX TODO: Ensure that watchdog decode is enabled
* (register 0x41, bit 3).
*/
device_set_desc(dev, "AMD SB600/SB7xx Watchdog Timer");
}
static void
amdsbwd_probe_sb8xx(device_t dev, struct resource *pmres, uint32_t *addr)
{
uint32_t val;
int i;
/* Report cause of previous reset for user's convenience. */
val = pmio_read(pmres, AMDSB8_PM_RESET_CTRL);
if ((val & AMDSB8_RST_STS_DIS) != 0) {
val &= ~AMDSB8_RST_STS_DIS;
pmio_write(pmres, AMDSB8_PM_RESET_CTRL, val);
}
val = 0;
for (i = 3; i >= 0; i--) {
val <<= 8;
val |= pmio_read(pmres, AMDSB8_PM_RESET_STATUS + i);
}
if (val != 0)
amdsbwd_verbose_printf(dev, "ResetStatus = 0x%08x\n", val);
if ((val & AMDSB8_WD_RST_STS) != 0)
device_printf(dev, "Previous Reset was caused by Watchdog\n");
/* Find base address of memory mapped WDT registers. */
for (*addr = 0, i = 0; i < 4; i++) {
*addr <<= 8;
*addr |= pmio_read(pmres, AMDSB8_PM_WDT_EN + 3 - i);
}
*addr &= ~0x07u;
/* Set watchdog timer tick to 1s. */
val = pmio_read(pmres, AMDSB8_PM_WDT_CTRL);
val &= ~AMDSB8_WDT_RES_MASK;
val |= AMDSB8_WDT_1HZ;
pmio_write(pmres, AMDSB8_PM_WDT_CTRL, val);
#ifdef AMDSBWD_DEBUG
val = pmio_read(pmres, AMDSB8_PM_WDT_CTRL);
amdsbwd_verbose_printf(dev, "AMDSB8_PM_WDT_CTRL value = %#04x\n", val);
#endif
/*
* Enable watchdog device (in stopped state)
* and decoding of its address.
*/
val = pmio_read(pmres, AMDSB8_PM_WDT_EN);
val &= ~AMDSB8_WDT_DISABLE;
val |= AMDSB8_WDT_DEC_EN;
pmio_write(pmres, AMDSB8_PM_WDT_EN, val);
#ifdef AMDSBWD_DEBUG
val = pmio_read(pmres, AMDSB8_PM_WDT_EN);
device_printf(dev, "AMDSB8_PM_WDT_EN value = %#04x\n", val);
#endif
device_set_desc(dev, "AMD SB8xx/SB9xx/Axx Watchdog Timer");
}
static void
amdsbwd_probe_fch41(device_t dev, struct resource *pmres, uint32_t *addr)
{
uint8_t val;
val = pmio_read(pmres, AMDFCH41_PM_ISA_CTRL);
if ((val & AMDFCH41_MMIO_EN) != 0) {
/* Fixed offset for the watchdog within ACPI MMIO range. */
amdsbwd_verbose_printf(dev, "ACPI MMIO range is enabled\n");
*addr = AMDFCH41_MMIO_ADDR + AMDFCH41_MMIO_WDT_OFF;
} else {
/*
* Enable decoding of watchdog MMIO address.
*/
val = pmio_read(pmres, AMDFCH41_PM_DECODE_EN0);
val |= AMDFCH41_WDT_EN;
pmio_write(pmres, AMDFCH41_PM_DECODE_EN0, val);
#ifdef AMDSBWD_DEBUG
val = pmio_read(pmres, AMDFCH41_PM_DECODE_EN0);
device_printf(dev, "AMDFCH41_PM_DECODE_EN0 value = %#04x\n",
val);
#endif
/* Special fixed MMIO range for the watchdog. */
*addr = AMDFCH41_WDT_FIXED_ADDR;
}
/*
* Set watchdog timer tick to 1s and
* enable the watchdog device (in stopped state).
*/
val = pmio_read(pmres, AMDFCH41_PM_DECODE_EN3);
val &= ~AMDFCH41_WDT_RES_MASK;
val |= AMDFCH41_WDT_RES_1S;
val &= ~AMDFCH41_WDT_EN_MASK;
val |= AMDFCH41_WDT_ENABLE;
pmio_write(pmres, AMDFCH41_PM_DECODE_EN3, val);
#ifdef AMDSBWD_DEBUG
val = pmio_read(pmres, AMDFCH41_PM_DECODE_EN3);
amdsbwd_verbose_printf(dev, "AMDFCH41_PM_DECODE_EN3 value = %#04x\n",
val);
#endif
device_set_desc(dev, "AMD FCH Rev 41h+ Watchdog Timer");
}
static int
amdsbwd_probe(device_t dev)
{
struct resource *res;
device_t smb_dev;
uint32_t addr;
int rid;
int rc;
uint32_t devid;
uint8_t revid;
/* Do not claim some ISA PnP device by accident. */
if (isa_get_logicalid(dev) != 0)
return (ENXIO);
rc = bus_set_resource(dev, SYS_RES_IOPORT, 0, AMDSB_PMIO_INDEX,
AMDSB_PMIO_WIDTH);
if (rc != 0) {
device_printf(dev, "bus_set_resource for IO failed\n");
return (ENXIO);
}
rid = 0;
res = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid,
RF_ACTIVE | RF_SHAREABLE);
if (res == NULL) {
device_printf(dev, "bus_alloc_resource for IO failed\n");
return (ENXIO);
}
smb_dev = pci_find_bsf(0, 20, 0);
KASSERT(smb_dev != NULL, ("can't find SMBus PCI device\n"));
devid = pci_get_devid(smb_dev);
revid = pci_get_revid(smb_dev);
if (devid == AMDSB_SMBUS_DEVID && revid < AMDSB8_SMBUS_REVID)
amdsbwd_probe_sb7xx(dev, res, &addr);
else if (devid == AMDSB_SMBUS_DEVID ||
(devid == AMDFCH_SMBUS_DEVID && revid < AMDFCH41_SMBUS_REVID) ||
(devid == AMDCZ_SMBUS_DEVID && revid < AMDCZ49_SMBUS_REVID))
amdsbwd_probe_sb8xx(dev, res, &addr);
else
amdsbwd_probe_fch41(dev, res, &addr);
bus_release_resource(dev, SYS_RES_IOPORT, rid, res);
bus_delete_resource(dev, SYS_RES_IOPORT, rid);
amdsbwd_verbose_printf(dev, "memory base address = %#010x\n", addr);
rc = bus_set_resource(dev, SYS_RES_MEMORY, 0, addr + AMDSB_WD_CTRL,
AMDSB_WDIO_REG_WIDTH);
if (rc != 0) {
device_printf(dev, "bus_set_resource for control failed\n");
return (ENXIO);
}
rc = bus_set_resource(dev, SYS_RES_MEMORY, 1, addr + AMDSB_WD_COUNT,
AMDSB_WDIO_REG_WIDTH);
if (rc != 0) {
device_printf(dev, "bus_set_resource for count failed\n");
return (ENXIO);
}
return (0);
}
static int
amdsbwd_attach_sb(device_t dev, struct amdsbwd_softc *sc)
{
sc->max_ticks = UINT16_MAX;
sc->rid_ctrl = 0;
sc->rid_count = 1;
sc->ms_per_tick = 1000;
sc->res_ctrl = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&sc->rid_ctrl, RF_ACTIVE);
if (sc->res_ctrl == NULL) {
device_printf(dev, "bus_alloc_resource for ctrl failed\n");
return (ENXIO);
}
sc->res_count = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&sc->rid_count, RF_ACTIVE);
if (sc->res_count == NULL) {
device_printf(dev, "bus_alloc_resource for count failed\n");
return (ENXIO);
}
return (0);
}
static int
amdsbwd_attach(device_t dev)
{
struct amdsbwd_softc *sc;
int rc;
sc = device_get_softc(dev);
sc->dev = dev;
rc = amdsbwd_attach_sb(dev, sc);
if (rc != 0)
goto fail;
#ifdef AMDSBWD_DEBUG
device_printf(dev, "wd ctrl = %#04x\n", wdctrl_read(sc));
device_printf(dev, "wd count = %#04x\n", wdcount_read(sc));
#endif
/* Setup initial state of Watchdog Control. */
wdctrl_write(sc, AMDSB_WD_FIRED);
if (wdctrl_read(sc) & AMDSB_WD_DISABLE) {
device_printf(dev, "watchdog hardware is disabled\n");
goto fail;
}
sc->ev_tag = EVENTHANDLER_REGISTER(watchdog_list, amdsbwd_event, sc,
EVENTHANDLER_PRI_ANY);
return (0);
fail:
amdsbwd_detach(dev);
return (ENXIO);
}
static int
amdsbwd_detach(device_t dev)
{
struct amdsbwd_softc *sc;
sc = device_get_softc(dev);
if (sc->ev_tag != NULL)
EVENTHANDLER_DEREGISTER(watchdog_list, sc->ev_tag);
if (sc->active)
amdsbwd_tmr_disable(sc);
if (sc->res_ctrl != NULL)
bus_release_resource(dev, SYS_RES_MEMORY, sc->rid_ctrl,
sc->res_ctrl);
if (sc->res_count != NULL)
bus_release_resource(dev, SYS_RES_MEMORY, sc->rid_count,
sc->res_count);
return (0);
}
static int
amdsbwd_suspend(device_t dev)
{
struct amdsbwd_softc *sc;
uint32_t val;
sc = device_get_softc(dev);
val = wdctrl_read(sc);
val &= ~AMDSB_WD_RUN;
wdctrl_write(sc, val);
return (0);
}
static int
amdsbwd_resume(device_t dev)
{
struct amdsbwd_softc *sc;
sc = device_get_softc(dev);
wdctrl_write(sc, AMDSB_WD_FIRED);
if (sc->active) {
amdsbwd_tmr_set(sc, sc->timeout);
amdsbwd_tmr_enable(sc);
amdsbwd_tmr_reload(sc);
}
return (0);
}
Reference in New Issue View Git Blame Copy Permalink