freebsd-skq/sys/dev/pdq/if_fpa.c
Peter Wemm e6de111aca Newbusify the PCI PDQ (fddi) attachment. This isn't as clean as
the EISA attachment and has not been tested (no hardware!), but at least
it stands a chance at working.  At least it compiles now.
2001-01-02 09:30:48 +00:00

159 lines
4.3 KiB
C

/*-
* Copyright (c) 1995, 1996 Matt Thomas <matt@3am-software.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software withough specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*
*/
/*
* DEC PDQ FDDI Controller; code for BSD derived operating systems
*
* This module supports the DEC DEFPA PCI FDDI Controller
*/
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/ethernet.h>
#include <net/if_arp.h>
#include <dev/pdq/pdqvar.h>
#include <dev/pdq/pdqreg.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <pci/pcivar.h>
#include <pci/pcireg.h>
#define DEC_VENDORID 0x1011
#define DEFPA_CHIPID 0x000F
#define DEFPA_LATENCY 0x88
#define PCI_CFLT 0x0C /* Configuration Latency */
#define PCI_CBMA 0x10 /* Configuration Base Memory Address */
#define PCI_CBIO 0x14 /* Configuration Base I/O Address */
static void
pdq_pci_ifintr(void *arg)
{
pdq_softc_t *sc;
sc = device_get_softc(arg);
(void) pdq_interrupt(sc->sc_pdq);
}
/*
* This is the PCI configuration support.
*/
static int
pdq_pci_probe(device_t dev)
{
if (pci_get_vendor(dev) == DEC_VENDORID &&
pci_get_device(dev) == DEFPA_CHIPID) {
device_set_desc(dev, "Digital DEFPA PCI FDDI Controller");
return 0;
}
return ENXIO;
}
static int
pdq_pci_attach(device_t dev)
{
pdq_softc_t *sc;
int data;
struct resource *memres, *irqres;
int rid;
void *ih;
memres = NULL;
irqres = NULL;
sc = device_get_softc(dev);
data = pci_read_config(dev, PCIR_LATTIMER, 1);
if (data < DEFPA_LATENCY) {
data = DEFPA_LATENCY;
pci_write_config(dev, PCIR_LATTIMER, data, 1);
}
rid = PCI_CBMA;
memres = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, 0, ~0, 1, RF_ACTIVE);
if (!memres)
goto bad;
sc->sc_if.if_name = "fpa";
sc->sc_if.if_unit = device_get_unit(dev);
sc->sc_membase = (pdq_bus_memaddr_t) rman_get_virtual(memres);
sc->sc_pdq = pdq_initialize(PDQ_BUS_PCI, sc->sc_membase,
sc->sc_if.if_name, sc->sc_if.if_unit,
(void *) sc, PDQ_DEFPA);
if (sc->sc_pdq == NULL)
goto bad;
bcopy((caddr_t) sc->sc_pdq->pdq_hwaddr.lanaddr_bytes, sc->sc_ac.ac_enaddr, 6);
pdq_ifattach(sc, NULL);
rid = 0;
irqres = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
RF_SHAREABLE | RF_ACTIVE);
if (!irqres)
goto bad;
if (bus_setup_intr(dev, irqres, INTR_TYPE_NET, pdq_pci_ifintr,
(void *)dev, &ih))
goto bad;
return 0;
bad:
if (memres)
bus_release_resource(dev, SYS_RES_MEMORY, PCI_CBMA, memres);
if (irqres)
bus_release_resource(dev, SYS_RES_IRQ, 0, irqres);
return ENXIO;
}
static void
pdq_pci_shutdown(device_t dev)
{
pdq_softc_t *sc;
sc = device_get_softc(dev);
pdq_hwreset(sc->sc_pdq);
}
static device_method_t pdq_pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, pdq_pci_probe),
DEVMETHOD(device_attach, pdq_pci_attach),
DEVMETHOD(device_shutdown, pdq_pci_shutdown),
{ 0, 0 }
};
static driver_t pdq_pci_driver = {
"fpa",
pdq_pci_methods,
sizeof(pdq_softc_t),
};
static devclass_t pdq_devclass;
DRIVER_MODULE(if_fpa, pci, pdq_pci_driver, pdq_devclass, 0, 0);