fe47fb7b1c
Approved by: stas (mentor)
240 lines
6.3 KiB
C
240 lines
6.3 KiB
C
/*
|
|
* Copyright (C) 2013 Ganbold Tsagaankhuu <ganbold@freebsd.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef __IF_EMACREG_H__
|
|
#define __IF_EMACREG_H__
|
|
|
|
/*
|
|
* EMAC register definitions
|
|
*/
|
|
#define EMAC_CTL 0x00
|
|
#define EMAC_CTL_RST (1 << 0)
|
|
#define EMAC_CTL_TX_EN (1 << 1)
|
|
#define EMAC_CTL_RX_EN (1 << 2)
|
|
|
|
#define EMAC_TX_MODE 0x04
|
|
#define EMAC_TX_FLOW 0x08
|
|
#define EMAC_TX_CTL0 0x0C
|
|
#define EMAC_TX_CTL1 0x10
|
|
#define EMAC_TX_INS 0x14
|
|
#define EMAC_TX_PL0 0x18
|
|
#define EMAC_TX_PL1 0x1C
|
|
#define EMAC_TX_STA 0x20
|
|
#define EMAC_TX_IO_DATA 0x24
|
|
#define EMAC_TX_IO_DATA1 0x28
|
|
#define EMAC_TX_TSVL0 0x2C
|
|
#define EMAC_TX_TSVH0 0x30
|
|
#define EMAC_TX_TSVL1 0x34
|
|
#define EMAC_TX_TSVH1 0x38
|
|
|
|
#define EMAC_RX_CTL 0x3C
|
|
#define EMAC_RX_HASH0 0x40
|
|
#define EMAC_RX_HASH1 0x44
|
|
#define EMAC_RX_STA 0x48
|
|
#define EMAC_RX_IO_DATA 0x4C
|
|
#define EMAC_RX_FBC 0x50
|
|
|
|
#define EMAC_INT_CTL 0x54
|
|
#define EMAC_INT_STA 0x58
|
|
#define EMAC_INT_STA_TX (0x01 | 0x02)
|
|
#define EMAC_INT_STA_RX 0x100
|
|
#define EMAC_INT_EN (0xf << 0) | (1 << 8)
|
|
|
|
#define EMAC_MAC_CTL0 0x5C
|
|
#define EMAC_MAC_CTL1 0x60
|
|
#define EMAC_MAC_IPGT 0x64
|
|
#define EMAC_MAC_IPGR 0x68
|
|
#define EMAC_MAC_CLRT 0x6C
|
|
#define EMAC_MAC_MAXF 0x70
|
|
#define EMAC_MAC_SUPP 0x74
|
|
#define EMAC_MAC_TEST 0x78
|
|
#define EMAC_MAC_MCFG 0x7C
|
|
#define EMAC_MAC_MCMD 0x80
|
|
#define EMAC_MAC_MADR 0x84
|
|
#define EMAC_MAC_MWTD 0x88
|
|
#define EMAC_MAC_MRDD 0x8C
|
|
#define EMAC_MAC_MIND 0x90
|
|
#define EMAC_MAC_SSRR 0x94
|
|
#define EMAC_MAC_A0 0x98
|
|
#define EMAC_MAC_A1 0x9C
|
|
#define EMAC_MAC_A2 0xA0
|
|
|
|
#define EMAC_SAFX_L0 0xA4
|
|
#define EMAC_SAFX_H0 0xA8
|
|
#define EMAC_SAFX_L1 0xAC
|
|
#define EMAC_SAFX_H1 0xB0
|
|
#define EMAC_SAFX_L2 0xB4
|
|
#define EMAC_SAFX_H2 0xB8
|
|
#define EMAC_SAFX_L3 0xBC
|
|
#define EMAC_SAFX_H3 0xC0
|
|
|
|
#define EMAC_PHY_DUPLEX (1 << 8)
|
|
|
|
/*
|
|
* Each received packet has 8 bytes header:
|
|
* Byte 0: Packet valid flag: 0x01 valid, 0x00 not valid
|
|
* Byte 1: 0x43 -> Ascii code 'C'
|
|
* Byte 2: 0x41 -> Ascii code 'A'
|
|
* Byte 3: 0x4d -> Ascii code 'M'
|
|
* Byte 4: High byte of received packet's status
|
|
* Byte 5: Low byte of received packet's status
|
|
* Byte 6: High byte of packet size
|
|
* Byte 7: Low byte of packet size
|
|
*/
|
|
#define EMAC_PACKET_HEADER (0x0143414d)
|
|
|
|
/* Aborted frame enable */
|
|
#define EMAC_TX_AB_M (1 << 0)
|
|
|
|
/* 0: Enable CPU mode for TX, 1: DMA */
|
|
#define EMAC_TX_TM ~(1 << 1)
|
|
|
|
/* 0: DRQ asserted, 1: DRQ automatically */
|
|
#define EMAC_RX_DRQ_MODE (1 << 1)
|
|
|
|
/* 0: Enable CPU mode for RX, 1: DMA */
|
|
#define EMAC_RX_TM ~(1 << 2)
|
|
|
|
/* Pass all Frames */
|
|
#define EMAC_RX_PA (1 << 4)
|
|
|
|
/* Pass Control Frames */
|
|
#define EMAC_RX_PCF (1 << 5)
|
|
|
|
/* Pass Frames with CRC Error */
|
|
#define EMAC_RX_PCRCE (1 << 6)
|
|
|
|
/* Pass Frames with Length Error */
|
|
#define EMAC_RX_PLE (1 << 7)
|
|
|
|
/* Pass Frames length out of range */
|
|
#define EMAC_RX_POR (1 << 8)
|
|
|
|
/* Accept unicast Packets */
|
|
#define EMAC_RX_UCAD (1 << 16)
|
|
|
|
/* Enable DA Filtering */
|
|
#define EMAC_RX_DAF (1 << 17)
|
|
|
|
/* Accept multicast Packets */
|
|
#define EMAC_RX_MCO (1 << 20)
|
|
|
|
/* Enable Hash filter */
|
|
#define EMAC_RX_MHF (1 << 21)
|
|
|
|
/* Accept Broadcast Packets */
|
|
#define EMAC_RX_BCO (1 << 22)
|
|
|
|
/* Enable SA Filtering */
|
|
#define EMAC_RX_SAF (1 << 24)
|
|
|
|
/* Inverse Filtering */
|
|
#define EMAC_RX_SAIF (1 << 25)
|
|
|
|
#define EMAC_RX_SETUP (EMAC_RX_POR | EMAC_RX_UCAD | \
|
|
EMAC_RX_DAF | EMAC_RX_MCO | EMAC_RX_BCO)
|
|
|
|
/* Enable Receive Flow Control */
|
|
#define EMAC_MAC_CTL0_RFC (1 << 2)
|
|
|
|
/* Enable Transmit Flow Control */
|
|
#define EMAC_MAC_CTL0_TFC (1 << 3)
|
|
|
|
/* Enable soft reset */
|
|
#define EMAC_MAC_CTL0_SOFT_RST (1 << 15)
|
|
|
|
#define EMAC_MAC_CTL0_SETUP (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC)
|
|
|
|
/* Enable duplex */
|
|
#define EMAC_MAC_CTL1_DUP (1 << 0)
|
|
|
|
/* Enable MAC Frame Length Checking */
|
|
#define EMAC_MAC_CTL1_FLC (1 << 1)
|
|
|
|
/* Enable Huge Frame */
|
|
#define EMAC_MAC_CTL1_HF (1 << 2)
|
|
|
|
/* Enable MAC Delayed CRC */
|
|
#define EMAC_MAC_CTL1_DCRC (1 << 3)
|
|
|
|
/* Enable MAC CRC */
|
|
#define EMAC_MAC_CTL1_CRC (1 << 4)
|
|
|
|
/* Enable MAC PAD Short frames */
|
|
#define EMAC_MAC_CTL1_PC (1 << 5)
|
|
|
|
/* Enable MAC PAD Short frames and append CRC */
|
|
#define EMAC_MAC_CTL1_VC (1 << 6)
|
|
|
|
/* Enable MAC auto detect Short frames */
|
|
#define EMAC_MAC_CTL1_ADP (1 << 7)
|
|
|
|
#define EMAC_MAC_CTL1_PRE (1 << 8)
|
|
#define EMAC_MAC_CTL1_LPE (1 << 9)
|
|
|
|
/* Enable no back off */
|
|
#define EMAC_MAC_CTL1_NB (1 << 12)
|
|
|
|
#define EMAC_MAC_CTL1_BNB (1 << 13)
|
|
#define EMAC_MAC_CTL1_ED (1 << 14)
|
|
|
|
#define EMAC_MAC_CTL1_SETUP (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \
|
|
EMAC_MAC_CTL1_PC)
|
|
|
|
/* half duplex */
|
|
#define EMAC_MAC_IPGT_HD 0x12
|
|
|
|
/* full duplex */
|
|
#define EMAC_MAC_IPGT_FD 0x15
|
|
|
|
#define EMAC_MAC_NBTB_IPG1 0xC
|
|
#define EMAC_MAC_NBTB_IPG2 0x12
|
|
|
|
#define EMAC_MAC_CW 0x37
|
|
#define EMAC_MAC_RM 0xF
|
|
|
|
#define EMAC_MAC_MFL 0x0600
|
|
|
|
/* Receive status */
|
|
#define EMAC_CRCERR (1 << 4)
|
|
#define EMAC_LENERR (3 << 5)
|
|
|
|
#define EMAC_RX_FLUSH_FIFO (1 << 3)
|
|
#define EMAC_PHY_RESET (1 << 15)
|
|
#define EMAC_PHY_PWRDOWN (1 << 11)
|
|
|
|
#define EMAC_PROC_MIN 16
|
|
#define EMAC_PROC_MAX 255
|
|
#define EMAC_PROC_DEFAULT 64
|
|
|
|
#define EMAC_LOCK(cs) mtx_lock(&(sc)->emac_mtx)
|
|
#define EMAC_UNLOCK(cs) mtx_unlock(&(sc)->emac_mtx)
|
|
#define EMAC_ASSERT_LOCKED(sc) mtx_assert(&(sc)->emac_mtx, MA_OWNED);
|
|
|
|
#endif /* __IF_EMACREG_H__ */
|