jhb 2d6dc5656d Add support for the BCM5906[M] adapters. These adapters only support ...

10/100 operation and place the mailbox registers at a different offset.
They also do not have an EEPROM, so the MAC address must be read from
NVRAM instead.

MFC after:	1 month
PR:		kern/118975
Submitted by:	benjsc, Thomas Nyström  thn at saeab dot se
Submitted by:	sephe (original patch for DragonflyBSD)

2008-04-29 19:47:13 +00:00

..

acphy.c

Set MIIF_HAVE_FIBER and add IFM_100_FX media when the AC_MCTL_FX_SEL

2007-01-12 22:59:38 +00:00

acphyreg.h

- Correct the AC_MCTL_BYP_PCS constant.

2007-01-12 22:58:04 +00:00

amphy.c

Fix a typo in a comment.

2008-01-27 01:11:57 +00:00

amphyreg.h

…

bmtphy.c

…

bmtphyreg.h

…

brgphy.c

Add support for the BCM5906[M] adapters. These adapters only support

2008-04-29 19:47:13 +00:00

brgphyreg.h

Add support for the BCM5906[M] adapters. These adapters only support

2008-04-29 19:47:13 +00:00

ciphy.c

Recognize Cicada CS8244 phy chip (among others, can be found on MPC8572DS

2008-04-26 18:07:24 +00:00

ciphyreg.h

Add support Vitesse VSC8601 PHY that is found on nVidia network

2007-06-06 06:55:49 +00:00

e1000phy.c

Reset autonegotation timer if media option is not IFM_AUTO.

2007-11-16 10:39:18 +00:00

e1000phyreg.h

Add 88E1116/88E1116R PHY support code that takes the PHY out of

2007-10-29 05:50:22 +00:00

exphy.c

- Take advantage of mii_phy_dev_probe().

2007-01-12 23:17:43 +00:00

gentbi.c

- Remove MIIF_NOISOLATE; there's generally no reason to let gentbi(4)

2007-10-29 21:11:55 +00:00

icsphy.c

Add icsphy(4), Integrated Circuit Systems PHY driver, ported from

2007-06-11 02:04:50 +00:00

icsphyreg.h

Add icsphy(4), Integrated Circuit Systems PHY driver, ported from

2007-06-11 02:04:50 +00:00

inphy.c

Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table

2007-01-12 22:27:46 +00:00

inphyreg.h

…

ip1000phy.c

Add support for IC Plus IP1001 PHY.

2008-04-05 00:52:07 +00:00

ip1000phyreg.h

Add support for IC Plus IP1001 PHY.

2008-04-05 00:52:07 +00:00

lxtphy.c

Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table

2007-01-12 22:27:46 +00:00

lxtphyreg.h

…

mii_physubr.c

Remove mii_media_from_bmcr(); all previous users have been converted to

2007-01-13 00:14:45 +00:00

mii.c

Define the miibus ivars as a structure, instead of as a vector of

2007-05-01 18:21:24 +00:00

mii.h

…

miibus_if.m

…

miidevs

Add support for the BCM5906[M] adapters. These adapters only support

2008-04-29 19:47:13 +00:00

miivar.h

Remove mii_media_from_bmcr(); all previous users have been converted to

2007-01-13 00:14:45 +00:00

mlphy.c

…

nsgphy.c

…

nsgphyreg.h

…

nsphy.c

- Fix a typo in a comment.

2008-01-27 01:30:02 +00:00

nsphyreg.h

…

nsphyter.c

Add a driver for the National Semiconductor DP83815, DP83843 and

2008-01-27 01:10:41 +00:00

nsphyterreg.h

Add a driver for the National Semiconductor DP83815, DP83843 and

2008-01-27 01:10:41 +00:00

pnaphy.c

…

qsphy.c

…

qsphyreg.h

…

rgephy.c

Add detection of isolation state.

2008-03-05 01:15:10 +00:00

rgephyreg.h

Add support for RealTek RTL8211B(L) PHY. It's based on the patch

2007-10-29 02:17:07 +00:00

rlphy.c

IEEE 802.3 Annex 28B.3 explicitly specifies the following relative

2007-11-16 10:25:36 +00:00

rlswitch.c

MFp4: add basic driver for RTL8305SC switch in PHY emulation

2007-01-05 01:46:26 +00:00

ruephy.c

- Take advantage of mii_phy_dev_probe() and mii_phy_setmedia().

2007-01-13 00:06:41 +00:00

ruephyreg.h

…

tdkphy.c

IEEE 802.3 Annex 28B.3 explicitly specifies the following relative

2007-11-16 10:25:36 +00:00

tdkphyreg.h

…

tlphy.c

…

tlphyreg.h

…

ukphy_subr.c

IEEE 802.3 Annex 28B.3 explicitly specifies the following relative

2007-11-16 10:25:36 +00:00

ukphy.c

- Don't set MIIF_NOISOLATE so ukphy(4) can be used in configurations with

2007-01-20 00:52:29 +00:00

xmphy.c

…

xmphyreg.h

…