d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2d88da2f06
freebsd-skq/sys/arm/at91/board_sam9260ek.c

263 lines
6.9 KiB
C
Raw Blame History

/*-
* Copyright (c) 2012 Marius Strobl <marius@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Ethernut 5 board support
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <machine/board.h>
#include <arm/at91/at91_pioreg.h>
#include <arm/at91/at91_piovar.h>
#include <arm/at91/at91board.h>
#include <arm/at91/at91sam9260reg.h>
#include <arm/at91/at91_smc.h>
#include <arm/at91/at91_gpio.h>
#include <dev/nand/nfc_at91.h>
static struct at91_smc_init nand_smc = {
.ncs_rd_setup = 0,
.nrd_setup = 1,
.ncs_wr_setup = 0,
.nwe_setup = 1,
.ncs_rd_pulse = 3,
.nrd_pulse = 3,
.ncs_wr_pulse = 3,
.nwe_pulse = 3,
.nrd_cycle = 5,
.nwe_cycle = 5,
.mode = SMC_MODE_READ | SMC_MODE_WRITE | SMC_MODE_EXNW_DISABLED,
.tdf_cycles = 2,
};
static struct at91_nand_params nand_param = {
.ale = 1u << 21,
.cle = 1u << 22,
.width = 8,
.rnb_pin = AT91_PIN_PC13,
.nce_pin = AT91_PIN_PC14,
.cs = 3,
};
static void
bi_dbgu(void)
{
/*
* DBGU
*/
/* DRXD */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB14, 0);
/* DTXD */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB15, 1);
}
static void
bi_emac(void)
{
/*
* EMAC
*/
/* ETX0 */
at91_pio_use_periph_a(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA12, 0);
/* ETX1 */
at91_pio_use_periph_a(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA13, 0);
/* ERX0 */
at91_pio_use_periph_a(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA14, 0);
/* ERX1 */
at91_pio_use_periph_a(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA15, 0);
/* ETXEN */
at91_pio_use_periph_a(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA16, 0);
/* ERXDV */
at91_pio_use_periph_a(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA17, 0);
/* ERXER */
at91_pio_use_periph_a(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA18, 0);
/* ETXCK */
at91_pio_use_periph_a(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA19, 0);
/* EMDC */
at91_pio_use_periph_a(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA20, 0);
/* EMDIO */
at91_pio_use_periph_a(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA21, 0);
/* Not RMII */
/* ETX2 */
at91_pio_use_periph_b(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA10, 0);
/* ETX3 */
at91_pio_use_periph_b(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA11, 0);
/* ETXER */
at91_pio_use_periph_b(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA22, 0);
/* ERX2 */
at91_pio_use_periph_b(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA25, 0);
/* ERX3 */
at91_pio_use_periph_b(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA26, 0);
/* ERXCK */
at91_pio_use_periph_b(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA27, 0);
/* ECRS */
at91_pio_use_periph_b(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA28, 0);
/* ECOL */
at91_pio_use_periph_b(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA29, 0);
}
static void
bi_mmc(void)
{
/*
* MMC, wired to socket B.
*/
/* MCDB0 */
at91_pio_use_periph_b(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA0, 1);
/* MCCDB */
at91_pio_use_periph_b(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA1, 1);
/* MCDB3 */
at91_pio_use_periph_b(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA3, 1);
/* MCDB2 */
at91_pio_use_periph_b(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA4, 1);
/* MCDB1 */
at91_pio_use_periph_b(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA5, 1);
/* MCCK */
at91_pio_use_periph_a(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA8, 1);
/*
* SPI0 and MMC are wired together, since we don't support sharing
* don't support the dataflash. But if you did, you'd have to
* use CS0 and CS1.
*/
}
static void
bi_iic(void)
{
/*
* TWI. Only one child on the iic bus, which we take care of
* via hints.
*/
/* TWD */
at91_pio_use_periph_a(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA23, 1);
/* TWCK */
at91_pio_use_periph_a(AT91SAM9260_PIOA_BASE, AT91C_PIO_PA24, 1);
}
static void
bi_usart0(void)
{
/*
* USART0
*/
/* TXD0 */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB4, 1);
/* RXD0 */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB5, 0);
/* DSR0 */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB22, 0);
/* DCD0 */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB23, 0);
/* DTR0 */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB24, 1);
/* RI0 */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB25, 0);
/* RTS0 */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB26, 1);
/* CTS0 */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB27, 0);
}
static void
bi_usart1(void)
{
/*
* USART1
*/
/* RTS1 */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB28, 1);
/* CTS1 */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB29, 0);
/* TXD1 */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB6, 1);
/* RXD1 */
at91_pio_use_periph_a(AT91SAM9260_PIOB_BASE, AT91C_PIO_PB7, 0);
}
static void
bi_nand(void)
{
/* Samsung 256MB SLC Flash */
/* Setup Static Memory Controller */
at91_smc_setup(0, 3, &nand_smc);
at91_enable_nand(&nand_param);
/*
* This assumes
* - RNB is on pin PC13
* - CE is on pin PC14
*
* Nothing actually uses RNB right now.
*
* For CE, this currently asserts it during board setup and leaves it
* that way forever.
*
* All this can go away when the gpio pin-renumbering happens...
*/
at91_pio_use_gpio(AT91SAM9260_PIOC_BASE, AT91C_PIO_PC13 | AT91C_PIO_PC14);
at91_pio_gpio_input(AT91SAM9260_PIOC_BASE, AT91C_PIO_PC13); /* RNB */
at91_pio_gpio_output(AT91SAM9260_PIOC_BASE, AT91C_PIO_PC14, 0); /* nCS */
at91_pio_gpio_clear(AT91SAM9260_PIOC_BASE, AT91C_PIO_PC14); /* Assert nCS */
}
BOARD_INIT long
board_init(void)
{
bi_dbgu();
bi_emac();
bi_mmc();
/*
* SPI1 is wired to a audio CODEC that we don't support, so
* give it a pass.
*/
bi_iic();
bi_usart0();
bi_usart1();
/* USART2 - USART5 aren't wired up, except via PIO pins, ignore them. */
bi_nand();
return (at91_ramsize());
}
ARM_BOARD(AT91SAM9260EK, "Atmel SMA9260-EK")
Reference in New Issue View Git Blame Copy Permalink