d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2e3fd37d45
freebsd-skq/sys/mips/conf
History
Adrian Chadd 2e3fd37d45 Add the AR8327 bits to the DB120 config file. 
There's plenty of hints that I haven't yet fleshed out and are hardcoded
in arswitch_8327.c.  They're listed here (from OpenWRT) for completeness.

This is enough to get the thing up, running and pinging.

Note that the mdiobus for the on-switch switch changes - the AR8327
probes first, which exposes mdio1, and thus the arge1 mdiobus will probe
and attach as mdio2.  That is what the AR9344 on-chip switch has to
attach to.

Tested:

* Qualcomm Atheros DB120
2014-02-24 04:48:46 +00:00
..
ADM5120
ADM5120.hints
ALCHEMY
ALFA_HORNET_UB Add a configuration file and hints file for the Alfa Networks Hornet UB 2013-10-25 04:06:54 +00:00
ALFA_HORNET_UB.hints Add a configuration file and hints file for the Alfa Networks Hornet UB 2013-10-25 04:06:54 +00:00
AP91 Bring over a configuration for the Atheros AP91 reference board. 2012-08-29 01:08:36 +00:00
AP91.hints Hint miibus to attach arswitch on AP91, AP93 and RSPRO boards. 2012-11-07 22:46:30 +00:00
AP93 Convert AP93 to use the new AR724X_BASE configuration file. 2012-08-27 21:59:52 +00:00
AP93.hints Add the missing link back to the EEPROM firmware name. 2013-07-04 08:09:54 +00:00
AP94 * Enable ATH_EEPROM_FIRMWARE, now that it's a compile time option 2012-04-13 18:01:53 +00:00
AP94.hints Introduce configuration files for AP94 and AP96. 2012-04-13 08:52:25 +00:00
AP96 Convert to using ulzma. 2012-08-27 21:49:37 +00:00
AP96.hints Update AP96 to directly attach an arswitch. 2012-11-07 23:50:28 +00:00
AP121 Add AP121 ethernet / switch PHY support. 2013-04-05 01:38:13 +00:00
AP121.hints Add the basic GPIO pin mapping to the hints file. 2013-04-05 02:15:10 +00:00
AR71XX_BASE Back out r253779 & r253786. 2013-07-31 17:21:18 +00:00
AR71XX_BASE.hints Break out the AR71XX config file into _BASE and board specific 2011-12-29 05:51:48 +00:00
AR91XX_BASE Back out r253779 & r253786. 2013-07-31 17:21:18 +00:00
AR91XX_BASE.hints * Add in the gpio/gpioled drivers into AR91XX_BASE. 2011-12-15 01:05:38 +00:00
AR724X_BASE Back out r253779 & r253786. 2013-07-31 17:21:18 +00:00
AR724X_BASE.hints Create a skeleton AR724x SoC board configuration for use by AR724x devices. 2012-08-26 04:36:59 +00:00
AR933X_BASE Back out r253779 & r253786. 2013-07-31 17:21:18 +00:00
AR933X_BASE.hints Add in the vendor / device id so the ath_ahb glue works. 2013-06-26 05:02:47 +00:00
AR934X_BASE Enable use of the PCIe connected wifi on the DB120 (AR9344) board. 2014-02-14 05:25:15 +00:00
AR934X_BASE.hints Enable use of the PCIe connected wifi on the DB120 (AR9344) board. 2014-02-14 05:25:15 +00:00
BERI_DE4_BASE Enable ATSE_CFI_HACK in BERI configs, stable MAC addresses are useful. 2013-10-22 20:50:41 +00:00
BERI_DE4_MDROOT Sync BERI kernel configs with P4: 2013-10-22 15:45:31 +00:00
BERI_DE4_SDROOT Sync BERI kernel configs with P4: 2013-10-22 15:45:31 +00:00
BERI_DE4.hints Sync BERI kernel configs with P4: 2013-10-22 15:45:31 +00:00
BERI_NETFPGA_MDROOT Add an FDT DTS and MDROOT kernel configuration for BERI on NetFPGA. 2013-12-12 18:08:31 +00:00
BERI_SIM_BASE Sync BERI kernel configs with P4: 2013-10-22 15:45:31 +00:00
BERI_SIM_MDROOT Sync BERI kernel configs with P4: 2013-10-22 15:45:31 +00:00
BERI_SIM_SDROOT Sync BERI kernel configs with P4: 2013-10-22 15:45:31 +00:00
BERI_TEMPLATE Sync BERI kernel configs with P4: 2013-10-22 15:45:31 +00:00
BERI_TPAD.hints Add reference kernel configurations for FreeBSD/beri in simulation, on the 2012-08-25 12:02:13 +00:00
CARAMBOLA2 Add 8devices CARAMBOLA2 support. 2013-06-08 20:21:17 +00:00
CARAMBOLA2.hints Add the EEPROM start offset and size in so ath_ahb will use the 2013-06-26 05:03:47 +00:00
DB120 Enable use of the PCIe connected wifi on the DB120 (AR9344) board. 2014-02-14 05:25:15 +00:00
DB120.hints Add the AR8327 bits to the DB120 config file. 2014-02-24 04:48:46 +00:00
DEFAULTS Disable the option VFS_ALLOW_NONMPSAFE by default on all the supported 2012-03-06 20:01:25 +00:00
DIR-825 Add options GEOM_PART_GPT and options MSDOSFS to the DIR-825 2013-09-03 22:33:06 +00:00
DIR-825.hints Some vendors store the mac addresses of arge(4) as a literal sring in the 2013-08-23 13:14:18 +00:00
ENH200 Add in a configuration file and hints for the Engenius ENH-200. 2013-07-04 08:13:14 +00:00
ENH200.hints Oops - fix bad hint numbering for the ART section. 2013-07-04 08:42:20 +00:00
GXEMUL Back out r253779 & r253786. 2013-07-31 17:21:18 +00:00
GXEMUL32 Add 32-bit support for Gxemul's oldtestmips machine emulation 2013-09-04 20:34:36 +00:00
GXEMUL.hints Merge a rudimentary gxemul "oldtestmips" port. This consists almost 2012-05-02 08:10:15 +00:00
IDT
IDT.hints
MALTA set ROOTDEVNAME to ada0 with no paritions. This makes it much more functional 2013-10-02 14:43:17 +00:00
MALTA64 - Set proper KERNLOADADDR 2013-08-31 01:30:01 +00:00
MALTA.hints
OCTEON1 Retire the nve(4) driver; nfe(4) has been the default driver for NVIDIA 2014-02-16 12:22:43 +00:00
OCTEON1.hints
PB47 Remove duplicated GEOM_PART_* options. 2012-08-23 22:23:56 +00:00
PB47.hints Add a configuration file for the Atheros PB47 reference board. 2011-12-30 09:48:35 +00:00
PB92 Back out r253779 & r253786. 2013-07-31 17:21:18 +00:00
PB92.hints
PICOSTATION_M2HP Add device PicoStation M2HP support. 2013-08-30 20:46:01 +00:00
PICOSTATION_M2HP.hints Add device PicoStation M2HP support. 2013-08-30 20:46:01 +00:00
QEMU
ROUTERSTATION Modify the routerstation config to use ukswitch for now. 2013-05-08 20:57:37 +00:00
ROUTERSTATION_MFS Break out the AR71XX config file into _BASE and board specific 2011-12-29 05:51:48 +00:00
ROUTERSTATION.hints Add the default hints to make the GPIO pins, rf led and reset switch work 2013-08-28 14:43:04 +00:00
RSPRO Remove duplicated GEOM_PART_* options. 2012-08-23 22:23:56 +00:00
RSPRO_MFS Break out the AR71XX config file into _BASE and board specific 2011-12-29 05:51:48 +00:00
RSPRO_STANDALONE Remove duplicated GEOM_PART_* options. 2012-08-23 22:23:56 +00:00
RSPRO.hints Hint miibus to attach arswitch on AP91, AP93 and RSPRO boards. 2012-11-07 22:46:30 +00:00
RT305X Back out r253779 & r253786. 2013-07-31 17:21:18 +00:00
RT305X.hints Include device rt in RT305X config. 2011-07-14 11:53:23 +00:00
SENTRY5
SENTRY5.hints
std.SWARM Back out r253779 & r253786. 2013-07-31 17:21:18 +00:00
std.XLP Back out r253779 & r253786. 2013-07-31 17:21:18 +00:00
SWARM Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. 2012-03-29 02:54:35 +00:00
SWARM64 Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. 2012-03-29 02:54:35 +00:00
SWARM64_SMP Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. 2012-03-29 02:54:35 +00:00
SWARM_SMP Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. 2012-03-29 02:54:35 +00:00
SWARM.hints
TP-WN1043ND We have grown a bit too big lately. Shrinking the kernel for TP-Link 2013-09-17 20:33:42 +00:00
TP-WN1043ND.hints Fix the geom mappings for WR1043ND. 2014-01-07 13:09:35 +00:00
WZR-300HP Bring in configuration for Buffalo Airstation WZR-300HP, Atheros based 2013-09-17 22:26:07 +00:00
WZR-300HP.hints Bring in configuration for Buffalo Airstation WZR-300HP, Atheros based 2013-09-17 22:26:07 +00:00
XLP Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. 2012-03-29 02:54:35 +00:00
XLP64 Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. 2012-03-29 02:54:35 +00:00
XLP.hints I2C support for XLP, add hints for I2C devices and update PCI resource 2012-03-27 11:17:04 +00:00
XLPN32 Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH. 2012-03-29 02:54:35 +00:00
XLR Remove all legacy ATA code parts, not used since options ATA_CAM enabled in 2013-04-04 07:12:24 +00:00
XLR64 Back out r253779 & r253786. 2013-07-31 17:21:18 +00:00
XLRN32 Back out r253779 & r253786. 2013-07-31 17:21:18 +00:00