freebsd-skq/sys/dev/ath/ath_hal/ah_eeprom.h
Adrian Chadd 7239f9f75b Introduce the FRAC_5G EEPROM parameter.
This seems to indicate whether to program the NIC for fractional 5ghz
mode (ie, 5mhz spaced channels, rather than 10 or 20mhz spacing) or not.
The default (0) seems to mean "only program fractional mode if needed".
A different value (eg 1) seems to always enable fractional 5ghz mode
regardless of the frequency.

Obtained from:	Atheros
Approved by:	re (kib)
2011-07-30 13:45:12 +00:00

141 lines
5.1 KiB
C

/*
* Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
* Copyright (c) 2002-2008 Atheros Communications, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* $FreeBSD$
*/
#ifndef _ATH_AH_EEPROM_H_
#define _ATH_AH_EEPROM_H_
#define AR_EEPROM_VER1 0x1000 /* Version 1.0; 5210 only */
/*
* Version 3 EEPROMs are all 16K.
* 3.1 adds turbo limit, antenna gain, 16 CTL's, 11g info,
* and 2.4Ghz ob/db for B & G
* 3.2 has more accurate pcdac intercepts and analog chip
* calibration.
* 3.3 adds ctl in-band limit, 32 ctl's, and frequency
* expansion
* 3.4 adds xr power, gainI, and 2.4 turbo params
*/
#define AR_EEPROM_VER3 0x3000 /* Version 3.0; start of 16k EEPROM */
#define AR_EEPROM_VER3_1 0x3001 /* Version 3.1 */
#define AR_EEPROM_VER3_2 0x3002 /* Version 3.2 */
#define AR_EEPROM_VER3_3 0x3003 /* Version 3.3 */
#define AR_EEPROM_VER3_4 0x3004 /* Version 3.4 */
#define AR_EEPROM_VER4 0x4000 /* Version 4.x */
#define AR_EEPROM_VER4_0 0x4000 /* Version 4.0 */
#define AR_EEPROM_VER4_1 0x4001 /* Version 4.0 */
#define AR_EEPROM_VER4_2 0x4002 /* Version 4.0 */
#define AR_EEPROM_VER4_3 0x4003 /* Version 4.0 */
#define AR_EEPROM_VER4_6 0x4006 /* Version 4.0 */
#define AR_EEPROM_VER4_7 0x3007 /* Version 4.7 */
#define AR_EEPROM_VER4_9 0x4009 /* EEPROM EAR futureproofing */
#define AR_EEPROM_VER5 0x5000 /* Version 5.x */
#define AR_EEPROM_VER5_0 0x5000 /* Adds new 2413 cal powers and added params */
#define AR_EEPROM_VER5_1 0x5001 /* Adds capability values */
#define AR_EEPROM_VER5_3 0x5003 /* Adds spur mitigation table */
#define AR_EEPROM_VER5_4 0x5004
/*
* Version 14 EEPROMs came in with AR5416.
* 14.2 adds txFrameToPaOn, txFrameToDataStart, ht40PowerInc
* 14.3 adds bswAtten, bswMargin, swSettle, and base OpFlags for HT20/40
*/
#define AR_EEPROM_VER14 0xE000 /* Version 14.x */
#define AR_EEPROM_VER14_1 0xE001 /* Adds 11n support */
#define AR_EEPROM_VER14_2 0xE002
#define AR_EEPROM_VER14_3 0xE003
#define AR_EEPROM_VER14_7 0xE007
#define AR_EEPROM_VER14_9 0xE009
#define AR_EEPROM_VER14_16 0xE010
#define AR_EEPROM_VER14_17 0xE011
#define AR_EEPROM_VER14_19 0xE013
enum {
AR_EEP_RFKILL, /* use ath_hal_eepromGetFlag */
AR_EEP_AMODE, /* use ath_hal_eepromGetFlag */
AR_EEP_BMODE, /* use ath_hal_eepromGetFlag */
AR_EEP_GMODE, /* use ath_hal_eepromGetFlag */
AR_EEP_TURBO5DISABLE, /* use ath_hal_eepromGetFlag */
AR_EEP_TURBO2DISABLE, /* use ath_hal_eepromGetFlag */
AR_EEP_ISTALON, /* use ath_hal_eepromGetFlag */
AR_EEP_32KHZCRYSTAL, /* use ath_hal_eepromGetFlag */
AR_EEP_MACADDR, /* uint8_t* */
AR_EEP_COMPRESS, /* use ath_hal_eepromGetFlag */
AR_EEP_FASTFRAME, /* use ath_hal_eepromGetFlag */
AR_EEP_AES, /* use ath_hal_eepromGetFlag */
AR_EEP_BURST, /* use ath_hal_eepromGetFlag */
AR_EEP_MAXQCU, /* uint16_t* */
AR_EEP_KCENTRIES, /* uint16_t* */
AR_EEP_NFTHRESH_5, /* int16_t* */
AR_EEP_NFTHRESH_2, /* int16_t* */
AR_EEP_REGDMN_0, /* uint16_t* */
AR_EEP_REGDMN_1, /* uint16_t* */
AR_EEP_OPCAP, /* uint16_t* */
AR_EEP_OPMODE, /* uint16_t* */
AR_EEP_RFSILENT, /* uint16_t* */
AR_EEP_OB_5, /* uint8_t* */
AR_EEP_DB_5, /* uint8_t* */
AR_EEP_OB_2, /* uint8_t* */
AR_EEP_DB_2, /* uint8_t* */
AR_EEP_TXMASK, /* uint8_t* */
AR_EEP_RXMASK, /* uint8_t* */
AR_EEP_RXGAIN_TYPE, /* uint8_t* */
AR_EEP_TXGAIN_TYPE, /* uint8_t* */
AR_EEP_DAC_HPWR_5G, /* uint8_t* */
AR_EEP_OL_PWRCTRL, /* use ath_hal_eepromGetFlag */
AR_EEP_FSTCLK_5G, /* use ath_hal_eepromGetFlag */
AR_EEP_ANTGAINMAX_5, /* int8_t* */
AR_EEP_ANTGAINMAX_2, /* int8_t* */
AR_EEP_WRITEPROTECT, /* use ath_hal_eepromGetFlag */
AR_EEP_PWR_TABLE_OFFSET,/* int8_t* */
AR_EEP_PWDCLKIND, /* uint8_t* */
AR_EEP_TEMPSENSE_SLOPE, /* int8_t* */
AR_EEP_TEMPSENSE_SLOPE_PAL_ON, /* int8_t* */
AR_EEP_FRAC_N_5G, /* uint8_t* */
};
typedef struct {
uint16_t rdEdge;
uint16_t twice_rdEdgePower;
HAL_BOOL flag;
} RD_EDGES_POWER;
/* XXX should probably be version-dependent */
#define SD_NO_CTL 0xf0
#define NO_CTL 0xff
#define CTL_MODE_M 0x0f
#define CTL_11A 0
#define CTL_11B 1
#define CTL_11G 2
#define CTL_TURBO 3
#define CTL_108G 4
#define CTL_2GHT20 5
#define CTL_5GHT20 6
#define CTL_2GHT40 7
#define CTL_5GHT40 8
#define AR_NO_SPUR 0x8000
/* XXX exposed to chip code */
#define MAX_RATE_POWER 63
HAL_STATUS ath_hal_v1EepromAttach(struct ath_hal *ah);
HAL_STATUS ath_hal_legacyEepromAttach(struct ath_hal *ah);
HAL_STATUS ath_hal_v14EepromAttach(struct ath_hal *ah);
HAL_STATUS ath_hal_v4kEepromAttach(struct ath_hal *ah);
HAL_STATUS ath_hal_9287EepromAttach(struct ath_hal *ah);
#endif /* _ATH_AH_EEPROM_H_ */