freebsd-skq/sys/pci/uhci_pci.c
Nick Hibma 25519565df 1) rename dev->self to be consistent
2) use device_printf
3) properly tear down and disable interrupts when init fails
1999-08-18 10:24:59 +00:00

272 lines
7.7 KiB
C

/* $FreeBSD$ */
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (augustss@carlstedt.se) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/* Universal Host Controller Interface
*
* UHCI spec: http://www.intel.com/
*/
/* The low level controller code for UHCI has been split into
* PCI probes and UHCI specific code. This was done to facilitate the
* sharing of code between *BSD's
*/
#include "opt_bus.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/device.h>
#include <sys/proc.h>
#include <sys/queue.h>
#if defined(__FreeBSD__)
#include <machine/bus_pio.h>
#endif
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <pci/pcivar.h>
#include <pci/pcireg.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usb_mem.h>
#include <dev/usb/uhcireg.h>
#include <dev/usb/uhcivar.h>
#define PCI_UHCI_VENDORID_INTEL 0x8086
#define PCI_UHCI_VENDORID_VIA 0x1106
#define PCI_UHCI_DEVICEID_PIIX3 0x70208086
static const char *uhci_device_piix3 = "Intel 82371SB (PIIX3) USB controller";
#define PCI_UHCI_DEVICEID_PIIX4 0x71128086
#define PCI_UHCI_DEVICEID_PIIX4E 0x71128086 /* no separate stepping */
static const char *uhci_device_piix4 = "Intel 82371AB/EB (PIIX4) USB controller";
#define PCI_UHCI_DEVICEID_VT83C572 0x30381106
static const char *uhci_device_vt83c572 = "VIA 83C572 USB controller";
static const char *uhci_device_generic = "UHCI (generic) USB controller";
#define PCI_UHCI_BASE_REG 0x20
static const char *
uhci_pci_match(device_t self)
{
u_int32_t device_id = pci_get_devid(self);
if (device_id == PCI_UHCI_DEVICEID_PIIX3) {
return (uhci_device_piix3);
} else if (device_id == PCI_UHCI_DEVICEID_PIIX4) {
return (uhci_device_piix4);
} else if (device_id == PCI_UHCI_DEVICEID_VT83C572) {
return (uhci_device_vt83c572);
} else {
if ( pci_get_class(self) == PCIC_SERIALBUS
&& pci_get_subclass(self) == PCIS_SERIALBUS_USB
&& pci_get_progif(self) == PCI_INTERFACE_UHCI) {
return (uhci_device_generic);
}
}
return NULL; /* dunno... */
}
static int
uhci_pci_probe(device_t self)
{
const char *desc = uhci_pci_match(self);
if (desc) {
device_set_desc(self, desc);
return 0;
} else {
return ENXIO;
}
}
static int
uhci_pci_attach(device_t self)
{
uhci_softc_t *sc = device_get_softc(self);
device_t parent = device_get_parent(self);
int rid;
void *ih;
struct resource *res;
device_t usbus;
char *typestr;
int legsup;
int err;
rid = PCI_UHCI_BASE_REG;
res = bus_alloc_resource(self, SYS_RES_IOPORT, &rid,
0, ~0, 1, RF_ACTIVE);
if (!res) {
device_printf(self, "could not map ports\n");
return ENXIO;
}
sc->iot = rman_get_bustag(res);
sc->ioh = rman_get_bushandle(res);
bus_space_write_2(sc->iot, sc->ioh, UHCI_INTR, 0); /* disable interrupts */
rid = 0;
res = bus_alloc_resource(self, SYS_RES_IRQ, &rid, 0, ~0, 1,
RF_SHAREABLE | RF_ACTIVE);
if (res == NULL) {
device_printf(self, "could not allocate irq\n");
return ENOMEM;
}
usbus = device_add_child(self, "usb", -1, sc);
if (!usbus) {
device_printf(self, "could not add USB device\n");
return ENOMEM;
}
switch (pci_get_devid(self)) {
case PCI_UHCI_DEVICEID_PIIX3:
device_set_desc(usbus, uhci_device_piix3);
sprintf(sc->sc_vendor, "Intel");
break;
case PCI_UHCI_DEVICEID_PIIX4:
device_set_desc(usbus, uhci_device_piix4);
sprintf(sc->sc_vendor, "Intel");
break;
case PCI_UHCI_DEVICEID_VT83C572:
device_set_desc(usbus, uhci_device_vt83c572);
sprintf(sc->sc_vendor, "VIA");
break;
default:
device_printf(self, "(New UHCI DeviceId=0x%08x)\n",
pci_get_devid(self));
device_set_desc(usbus, uhci_device_generic);
sprintf(sc->sc_vendor, "(0x%08x)", pci_get_devid(self));
}
if (bootverbose) {
switch(pci_read_config(self, PCI_USBREV, 4) & PCI_USBREV_MASK) {
case PCI_USBREV_PRE_1_0:
typestr = "pre 1.0";
break;
case PCI_USBREV_1_0:
typestr = "1.0";
break;
default:
typestr = "unknown";
break;
}
device_printf(self, "USB version %s, chip rev. %d\n",
typestr, pci_get_revid(self));
}
err = BUS_SETUP_INTR(parent, self, res, INTR_TYPE_BIO,
(driver_intr_t *) uhci_intr, sc, &ih);
if (err) {
device_printf(self, "could not setup irq, %d\n", err);
device_delete_child(self, usbus);
return err;
}
legsup = pci_read_config(self, PCI_LEGSUP, 4);
if ( !(legsup & PCI_LEGSUP_USBPIRQDEN) ) {
#ifndef USB_DEBUG
if (bootverbose)
#endif
device_printf(self, "PIRQD enable not set\n");
legsup |= PCI_LEGSUP_USBPIRQDEN;
pci_write_config(self, PCI_LEGSUP, legsup, 4);
}
sc->sc_bus.bdev = usbus;
err = uhci_init(sc);
if (!err)
err = device_probe_and_attach(sc->sc_bus.bdev);
if (err) {
device_printf(self, "init failed\n");
/* disable interrupts */
bus_space_write_2(sc->iot, sc->ioh, UHCI_INTR, 0);
err = BUS_TEARDOWN_INTR(parent, self, res, ih);
if (err)
/* XXX or should we panic? */
device_printf(self, "could not tear down irq, %d\n",
err);
device_delete_child(self, usbus);
return EIO; /* XXX arbitrary value */
}
return 0;
}
static device_method_t uhci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, uhci_pci_probe),
DEVMETHOD(device_attach, uhci_pci_attach),
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_alloc_resource, bus_generic_alloc_resource),
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
{ 0, 0 }
};
static driver_t uhci_driver = {
"uhci",
uhci_methods,
sizeof(uhci_softc_t),
};
static devclass_t uhci_devclass;
DRIVER_MODULE(uhci, pci, uhci_driver, uhci_devclass, 0, 0);