freebsd-skq/sys/net/if_edsc.c
Gleb Smirnoff 76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00

355 lines
9.5 KiB
C

/*-
* Copyright (c) 1982, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following edsclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following edsclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE EDSCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* From: @(#)if_loop.c 8.1 (Berkeley) 6/10/93
* $FreeBSD$
*/
/*
* Discard interface driver for protocol testing and timing.
* Mimics an Ethernet device so that VLANs can be attached to it etc.
*/
#include <sys/param.h> /* types, important constants */
#include <sys/kernel.h> /* SYSINIT for load-time initializations */
#include <sys/malloc.h> /* malloc(9) */
#include <sys/module.h> /* module(9) */
#include <sys/mbuf.h> /* mbuf(9) */
#include <sys/socket.h> /* struct ifreq */
#include <sys/sockio.h> /* socket ioctl's */
/* #include <sys/systm.h> if you need printf(9) or other all-purpose globals */
#include <net/bpf.h> /* bpf(9) */
#include <net/ethernet.h> /* Ethernet related constants and types */
#include <net/if.h>
#include <net/if_var.h> /* basic part of ifnet(9) */
#include <net/if_clone.h> /* network interface cloning */
#include <net/if_types.h> /* IFT_ETHER and friends */
#include <net/if_var.h> /* kernel-only part of ifnet(9) */
static const char edscname[] = "edsc";
/*
* Software configuration of an interface specific to this device type.
*/
struct edsc_softc {
struct ifnet *sc_ifp; /* ptr to generic interface configuration */
/*
* A non-null driver can keep various things here, for instance,
* the hardware revision, cached values of write-only registers, etc.
*/
};
/*
* Attach to the interface cloning framework.
*/
static struct if_clone *edsc_cloner;
static int edsc_clone_create(struct if_clone *, int, caddr_t);
static void edsc_clone_destroy(struct ifnet *);
/*
* Interface driver methods.
*/
static void edsc_init(void *dummy);
/* static void edsc_input(struct ifnet *ifp, struct mbuf *m); would be here */
static int edsc_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data);
static void edsc_start(struct ifnet *ifp);
/*
* We'll allocate softc instances from this.
*/
static MALLOC_DEFINE(M_EDSC, edscname, "Ethernet discard interface");
/*
* Create an interface instance.
*/
static int
edsc_clone_create(struct if_clone *ifc, int unit, caddr_t params)
{
struct edsc_softc *sc;
struct ifnet *ifp;
static u_char eaddr[ETHER_ADDR_LEN]; /* 0:0:0:0:0:0 */
/*
* Allocate soft and ifnet structures. Link each to the other.
*/
sc = malloc(sizeof(struct edsc_softc), M_EDSC, M_WAITOK | M_ZERO);
ifp = sc->sc_ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
free(sc, M_EDSC);
return (ENOSPC);
}
ifp->if_softc = sc;
/*
* Get a name for this particular interface in its ifnet structure.
*/
if_initname(ifp, edscname, unit);
/*
* Typical Ethernet interface flags: we can do broadcast and
* multicast but can't hear our own broadcasts or multicasts.
*/
ifp->if_flags = IFF_BROADCAST | IFF_MULTICAST | IFF_SIMPLEX;
/*
* We can pretent we have the whole set of hardware features
* because we just discard all packets we get from the upper layer.
* However, the features are disabled initially. They can be
* enabled via edsc_ioctl() when needed.
*/
ifp->if_capabilities =
IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_HWCSUM |
IFCAP_HWCSUM | IFCAP_TSO |
IFCAP_JUMBO_MTU;
ifp->if_capenable = 0;
/*
* Set the interface driver methods.
*/
ifp->if_init = edsc_init;
/* ifp->if_input = edsc_input; */
ifp->if_ioctl = edsc_ioctl;
ifp->if_start = edsc_start;
/*
* Set the maximum output queue length from the global parameter.
*/
ifp->if_snd.ifq_maxlen = ifqmaxlen;
/*
* Do ifnet initializations common to all Ethernet drivers
* and attach to the network interface framework.
* TODO: Pick a non-zero link level address.
*/
ether_ifattach(ifp, eaddr);
/*
* Now we can mark the interface as running, i.e., ready
* for operation.
*/
ifp->if_drv_flags |= IFF_DRV_RUNNING;
return (0);
}
/*
* Destroy an interface instance.
*/
static void
edsc_clone_destroy(struct ifnet *ifp)
{
struct edsc_softc *sc = ifp->if_softc;
/*
* Detach from the network interface framework.
*/
ether_ifdetach(ifp);
/*
* Free memory occupied by ifnet and softc.
*/
if_free(ifp);
free(sc, M_EDSC);
}
/*
* This method is invoked from ether_ioctl() when it's time
* to bring up the hardware.
*/
static void
edsc_init(void *dummy)
{
#if 0 /* what a hardware driver would do here... */
struct edsc_soft *sc = (struct edsc_softc *)dummy;
struct ifnet *ifp = sc->sc_ifp;
/* blah-blah-blah */
#endif
}
/*
* Network interfaces are controlled via the ioctl(2) syscall.
*/
static int
edsc_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct ifreq *ifr = (struct ifreq *)data;
switch (cmd) {
case SIOCSIFCAP:
#if 1
/*
* Just turn on any capabilities requested.
* The generic ifioctl() function has already made sure
* that they are supported, i.e., set in if_capabilities.
*/
ifp->if_capenable = ifr->ifr_reqcap;
#else
/*
* A h/w driver would need to analyze the requested
* bits and program the hardware, e.g.:
*/
mask = ifp->if_capenable ^ ifr->ifr_reqcap;
if (mask & IFCAP_VLAN_HWTAGGING) {
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING)
/* blah-blah-blah */
else
/* etc-etc-etc */
}
#endif
break;
default:
/*
* Offload the rest onto the common Ethernet handler.
*/
return (ether_ioctl(ifp, cmd, data));
}
return (0);
}
/*
* Process the output queue.
*/
static void
edsc_start(struct ifnet *ifp)
{
struct mbuf *m;
/*
* A hardware interface driver can set IFF_DRV_OACTIVE
* in ifp->if_drv_flags:
*
* ifp->if_drv_flags |= IFF_DRV_OACTIVE;
*
* to prevent if_start from being invoked again while the
* transmission is under way. The flag is to protect the
* device's transmitter, not the method itself. The output
* queue is locked and several threads can process it in
* parallel safely, so the driver can use other means to
* serialize access to the transmitter.
*
* If using IFF_DRV_OACTIVE, the driver should clear the flag
* not earlier than the current transmission is complete, e.g.,
* upon an interrupt from the device, not just before returning
* from if_start. This method merely starts the transmission,
* which may proceed asynchronously.
*/
/*
* We loop getting packets from the queue until it's empty.
* A h/w driver would loop until the device can accept more
* data into its buffer, or while there are free transmit
* descriptors, or whatever.
*/
for (;;) {
/*
* Try to dequeue one packet. Stop if the queue is empty.
* Use IF_DEQUEUE() here if ALTQ(9) support is unneeded.
*/
IFQ_DEQUEUE(&ifp->if_snd, m);
if (m == NULL)
break;
/*
* Let bpf(9) at the packet.
*/
BPF_MTAP(ifp, m);
/*
* Update the interface counters.
*/
ifp->if_obytes += m->m_pkthdr.len;
ifp->if_opackets++;
/*
* Finally, just drop the packet.
* TODO: Reply to ARP requests unless IFF_NOARP is set.
*/
m_freem(m);
}
/*
* ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
* would be here only if the transmission were synchronous.
*/
}
/*
* This function provides handlers for module events, namely load and unload.
*/
static int
edsc_modevent(module_t mod, int type, void *data)
{
switch (type) {
case MOD_LOAD:
/*
* Connect to the network interface cloning framework.
* The last argument is the number of units to be created
* from the outset. It's also the minimum number of units
* allowed. We don't want any units created as soon as the
* driver is loaded.
*/
edsc_cloner = if_clone_simple(edscname, edsc_clone_create,
edsc_clone_destroy, 0);
break;
case MOD_UNLOAD:
/*
* Disconnect from the cloning framework.
* Existing interfaces will be disposed of properly.
*/
if_clone_detach(edsc_cloner);
break;
default:
/*
* There are other event types, but we don't handle them.
* See module(9).
*/
return (EOPNOTSUPP);
}
return (0);
}
static moduledata_t edsc_mod = {
"if_edsc", /* name */
edsc_modevent, /* event handler */
NULL /* additional data */
};
DECLARE_MODULE(if_edsc, edsc_mod, SI_SUB_PSEUDO, SI_ORDER_ANY);