Adrian Chadd b0602bec18 Move the HAL channel survey support out to be in the top-level HAL, ... rathe than private in each HAL module. Whilst here, modify ath_hal_private to always have the per-channel noisefloor stats, rather than conditionally. This just makes life easier in general (no strange ABI differences between different HAL compile options.) Add a couple of methods (clear/reset, add) rather than using hand-rolled versions of things.		2015-03-29 21:50:21 +00:00
..
ath_dfs/null	The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare	2013-10-26 17:58:36 +00:00
ath_hal	Move the HAL channel survey support out to be in the top-level HAL,	2015-03-29 21:50:21 +00:00
ath_rate	Cast everything to something longer than 32 bits so the sample mask	2015-01-28 04:44:42 +00:00
ah_osdep.c	Pull in r267961 and r267973 again. Fix for issues reported will follow.	2014-06-28 03:56:17 +00:00
ah_osdep.h
if_ath_ahb.c	Lay some groundwork for having this stuff hang off of AHB rather than	2015-03-02 02:14:44 +00:00
if_ath_alq.c	Support sending ATH_ALQ messages with no payload.	2013-05-13 21:17:27 +00:00
if_ath_alq.h	Add ALQ beacon debugging.	2013-05-13 21:18:00 +00:00
if_ath_beacon.c	Shut down RX before TX - in theory, this should make the chip less likely	2014-08-23 18:55:51 +00:00
if_ath_beacon.h	Bring over some initial power save management support, reset path	2014-04-30 02:19:41 +00:00
if_ath_btcoex.c	Until there's a full MCI implementation - just implement a placeholder	2015-01-17 00:02:18 +00:00
if_ath_btcoex.h	Bring over the initial static bluetooth coexistence configuration	2013-06-07 09:02:02 +00:00
if_ath_debug.c	Pull in r267961 and r267973 again. Fix for issues reported will follow.	2014-06-28 03:56:17 +00:00
if_ath_debug.h	Bring over some initial power save management support, reset path	2014-04-30 02:19:41 +00:00
if_ath_keycache.c	Bring over some initial power save management support, reset path	2014-04-30 02:19:41 +00:00
if_ath_keycache.h
if_ath_led.c	Bring over some initial power save management support, reset path	2014-04-30 02:19:41 +00:00
if_ath_led.h
if_ath_lna_div.c	Add initial support for the AR9485 CUS198 / CUS230 variants.	2014-09-30 03:19:29 +00:00
if_ath_lna_div.h	Initial AR9485/AR933x 1x1 LNA diversity work.	2013-06-14 03:42:10 +00:00
if_ath_misc.h	Add tracking for self-generated frames when the VAP is in sleep state.	2014-05-02 00:48:09 +00:00
if_ath_pci_devlist.h	Add a missing file from the last commit.	2014-09-30 05:50:34 +00:00
if_ath_pci.c	Move the lock destruction/creation to earlier in the process - if	2015-02-14 18:14:45 +00:00
if_ath_rx_edma.c	Fix up the EDMA RX setup path to correctly initialise and reset the RX FIFO.	2014-09-20 01:22:17 +00:00
if_ath_rx_edma.h
if_ath_rx.c	Mechanically convert to if_inc_counter().	2014-09-18 20:47:39 +00:00
if_ath_rx.h	Fix the busdma logic to work with EDMA chipsets when using bounce	2013-04-04 08:21:56 +00:00
if_ath_spectral.c	The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare	2013-10-26 17:58:36 +00:00
if_ath_spectral.h	Add a new (skeleton) spectral mode manager module.	2013-01-02 03:59:02 +00:00
if_ath_sysctl.c	Bump the valid GPIO range for rfkill up from 8 to 16.	2014-12-23 18:48:45 +00:00
if_ath_sysctl.h
if_ath_tdma.c	Add casts to have it compile on amd64 without complaining about	2014-05-07 19:07:45 +00:00
if_ath_tdma.h
if_ath_tsf.h
if_ath_tx_edma.c	Quieten the RX/TX descriptor and FIFO setup debugging.	2014-05-05 08:00:50 +00:00
if_ath_tx_edma.h
if_ath_tx_ht.c	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_ath_tx_ht.h	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_ath_tx.c	Mechanically convert to if_inc_counter().	2014-09-18 20:47:39 +00:00
if_ath_tx.h	Implement a separate hardware queue threshold for aggregate and non-aggr	2013-05-21 18:13:57 +00:00
if_ath.c	Fix more ticks wrapping bugs exposed by the ticks wrapping bug check.	2015-03-29 21:41:05 +00:00
if_athdfs.h	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
if_athioctl.h	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_athrate.h	Update the rate series setup code to use the decisions already made in	2013-04-17 07:21:30 +00:00
if_athvar.h	Add initial support for the AR9485 CUS198 / CUS230 variants.	2014-09-30 03:19:29 +00:00