freebsd-skq/sys/sparc64/pci/ofw_pci.h
Thomas Moestl 1d80cb1b37 Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI
for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI
bridge driver. By utilizing these, the PCI handling is much more elegant
now.

The advantages of the new approach are:
- Device enumeration should hopefully be more like on Solaris now,
  so unit numbers should match what's printed on the box more
  closely.
- Real interrupt routing is implemented now, so cardbus bridges
  etc. have at least a chance to work.
- The quirk tables are gone and have been replaced by (hopefully
  sufficient) heuristics.
- Much cleaner code.

There was also a report that previously bogus interrupt assignments
are fixed now, which can be attributed to the new heuristics.

A pitfall, and the reason why this is not the default yet, is that
it changes device enumeration, as mentioned above, which can make
it necessary to change the system configuration if more than one
unit of a device type is present (on a system with two hme cars,
for example, it is possible that hme0 becomes hme1 and vice versa
after enabling the option). Systems with multiple disk controllers
may need to be booted into single user (and require manual specification
of the root file system on boot) to adjust the fstab.
Nevertheless, I would like to encourage users to use this option,
so that it can be made the default soon.

In detail, the changes are:
- Introduce an OFW PCI bus driver; it inherits most methods from the
  generic PCI bus driver, but uses the firmware for enumeration,
  performs additional initialization for devices and firmware-specific
  interrupt routing. It also implements an OFW-specific method to allow
  child devices to get their firmware nodes.
- Introduce an OFW PCI-PCI bridge driver; again, it inherits most
  of the generic PCI-PCI bridge driver; it has it's own method for
  interrupt routing, as well as some sparc64-specific methods (one to
  get the node again, and one to adjust the bridge bus range, since
  we need to reenumerate all PCI buses).
- Convert the apb driver to the new way of handling things.
- Provide a common framework for OFW bridge drivers, used be the two
  drivers above.
- Provide a small common framework for interrupt routing (for all
  bridge types).
- Convert the psycho driver to the new framework; this gets rid of a
  bunch of old kludges in pci_read_config(), and the whole
  preinitialization  (ofw_pci_init()).
- Convert the ISA MD part and the EBus driver to the new way
  interrupts and nodes are handled.
- Introduce types for firmware interrupt properties.
- Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only
  required for PCI), and move it to a more correct location (new
  support methodsx were also added, and an old one was deprecated).
- Fix a bunch of minor bugs, perform some cleanups.

In some cases, I introduced some minor code duplication to keep the
new code clean, in hopes that the old code will be unifdef'ed soon.

Reviewed in part by:	imp
Tested by:	jake, Marius Strobl <marius@alchemy.franken.de>,
		Sergey Mokryshev <mokr@mokr.net>,
		Chris Jackman <cjackNOSPAM@klatsch.org>
Info on u30 firmware provided by:	kris
2003-07-01 14:52:47 +00:00

99 lines
2.9 KiB
C

/*
* Copyright (c) 1999, 2000 Matthew R. Green
* Copyright (c) 2001, 2003 by Thomas Moestl <tmm@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: NetBSD: psychoreg.h,v 1.8 2001/09/10 16:17:06 eeh Exp
*
* $FreeBSD$
*/
#ifndef _SPARC64_PCI_OFW_PCI_H_
#define _SPARC64_PCI_OFW_PCI_H_
#include <machine/ofw_bus.h>
typedef u_int32_t ofw_pci_intr_t;
#include "ofw_pci_if.h"
/* PCI range child spaces. XXX: are these MI? */
#define PCI_CS_CONFIG 0x00
#define PCI_CS_IO 0x01
#define PCI_CS_MEM32 0x02
#define PCI_CS_MEM64 0x03
struct ofw_pci_imap {
u_int32_t phys_hi;
u_int32_t phys_mid;
u_int32_t phys_lo;
ofw_pci_intr_t intr;
phandle_t child_node;
phandle_t child_intr;
};
struct ofw_pci_imap_msk {
u_int32_t phys_hi;
u_int32_t phys_mid;
u_int32_t phys_lo;
ofw_pci_intr_t intr;
};
u_int8_t ofw_pci_alloc_busno(phandle_t);
#ifdef OFW_NEWPCI
static __inline phandle_t
ofw_pci_get_node(device_t dev)
{
return (OFW_PCI_GET_NODE(device_get_parent(dev), dev));
}
#else
struct ofw_pci_bdesc;
typedef void ofw_pci_binit_t(device_t, struct ofw_pci_bdesc *);
struct ofw_pci_bdesc {
u_int obd_bus;
u_int obd_slot;
u_int obd_func;
u_int obd_secbus;
u_int obd_subbus;
ofw_pci_binit_t *obd_init;
struct ofw_pci_bdesc *obd_super;
};
obr_callback_t ofw_pci_orb_callback;
ofw_pci_binit_t ofw_pci_binit;
void ofw_pci_init(device_t, phandle_t, ofw_pci_intr_t, struct ofw_pci_bdesc *);
phandle_t ofw_pci_find_node(int, int, int);
phandle_t ofw_pci_node(device_t);
#endif
#endif /* ! _SPARC64_PCI_OFW_PCI_H_ */