freebsd-skq/sys/kern/subr_disklabel.c
sos 304d831859 This update adds the support for != 512 byte sector SCSI devices to
the sd & od drivers. There is also slight changes to fdisk & newfs
in order to comply with different sectorsizes.
Currently sectors of size 512, 1024 & 2048 are supported, the only
restriction beeing in fdisk, which hunts for the sectorsize of
the device.
This is based on patches to od.c and the other system files by
John Gumb & Barry Scott, minor changes and the sd.c patches by
me.
There also exist some patches for the msdos filesys code, but I
havn't been able to test those (yet).

	John Gumb (john@talisker.demon.co.uk)
	Barry Scott (barry@scottb.demon.co.uk)
1996-12-01 11:25:38 +00:00

415 lines
12 KiB
C

/*
* Copyright (c) 1982, 1986, 1988, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)ufs_disksubr.c 8.5 (Berkeley) 1/21/94
* $Id: ufs_disksubr.c,v 1.26 1996/09/20 17:39:44 bde Exp $
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/buf.h>
#include <sys/conf.h>
#include <sys/disklabel.h>
#include <sys/diskslice.h>
#include <sys/syslog.h>
/*
* Seek sort for disks.
*
* The argument ap structure holds a b_actf activity chain pointer on which we
* keep two queues, sorted in ascending block order. The first queue holds
* those requests which are positioned after the current block (in the first
* request); the second holds requests which came in after their block number
* was passed. Thus we implement a one way scan, retracting after reaching the
* end of the drive to the first request on the second queue, at which time it
* becomes the first queue.
*
* A one-way scan is natural because of the way UNIX read-ahead blocks are
* allocated.
*/
/*
* For portability with historic industry practice, the
* cylinder number has to be maintained in the `b_resid'
* field.
*/
#define b_cylinder b_resid
void
tqdisksort(ap, bp)
struct buf_queue_head *ap;
register struct buf *bp;
{
register struct buf *bq;
struct buf *bn;
/* If the queue is empty, then it's easy. */
if ((bq = ap->tqh_first) == NULL) {
TAILQ_INSERT_HEAD(ap, bp, b_act);
return;
}
#if 1
/* Put new writes after all reads */
if ((bp->b_flags & B_READ) == 0) {
while (bn = bq->b_act.tqe_next) {
if ((bq->b_flags & B_READ) == 0)
break;
bq = bn;
}
} else {
while (bn = bq->b_act.tqe_next) {
if ((bq->b_flags & B_READ) == 0) {
if (ap->tqh_first != bq) {
bq = *bq->b_act.tqe_prev;
}
break;
}
bq = bn;
}
goto insert;
}
#endif
/*
* If we lie after the first (currently active) request, then we
* must locate the second request list and add ourselves to it.
*/
if (bp->b_pblkno < bq->b_pblkno) {
while (bn = bq->b_act.tqe_next) {
/*
* Check for an ``inversion'' in the normally ascending
* cylinder numbers, indicating the start of the second
* request list.
*/
if (bn->b_pblkno < bq->b_pblkno) {
/*
* Search the second request list for the first
* request at a larger cylinder number. We go
* before that; if there is no such request, we
* go at end.
*/
do {
if (bp->b_pblkno < bn->b_pblkno)
goto insert;
bq = bn;
} while (bn = bq->b_act.tqe_next);
goto insert; /* after last */
}
bq = bn;
}
/*
* No inversions... we will go after the last, and
* be the first request in the second request list.
*/
goto insert;
}
/*
* Request is at/after the current request...
* sort in the first request list.
*/
while (bn = bq->b_act.tqe_next) {
/*
* We want to go after the current request if there is an
* inversion after it (i.e. it is the end of the first
* request list), or if the next request is a larger cylinder
* than our request.
*/
if (bn->b_pblkno < bq->b_pblkno ||
bp->b_pblkno < bn->b_pblkno)
goto insert;
bq = bn;
}
/*
* Neither a second list nor a larger request... we go at the end of
* the first list, which is the same as the end of the whole schebang.
*/
insert:
TAILQ_INSERT_AFTER(ap, bq, bp, b_act);
}
/*
* Attempt to read a disk label from a device using the indicated strategy
* routine. The label must be partly set up before this: secpercyl, secsize
* and anything required in the strategy routine (e.g., dummy bounds for the
* partition containing the label) must be * filled in before calling us.
* Returns NULL on success and an error string on failure.
*/
char *
readdisklabel(dev, strat, lp)
dev_t dev;
d_strategy_t *strat;
register struct disklabel *lp;
{
register struct buf *bp;
struct disklabel *dlp;
char *msg = NULL;
bp = geteblk((int)lp->d_secsize);
bp->b_dev = dev;
bp->b_blkno = LABELSECTOR * ((int)lp->d_secsize/DEV_BSIZE);
bp->b_bcount = lp->d_secsize;
bp->b_flags &= ~B_INVAL;
bp->b_flags |= B_BUSY | B_READ;
bp->b_cylinder = LABELSECTOR / lp->d_secpercyl;
(*strat)(bp);
if (biowait(bp))
msg = "I/O error";
else for (dlp = (struct disklabel *)bp->b_data;
dlp <= (struct disklabel *)((char *)bp->b_data +
DEV_BSIZE - sizeof(*dlp));
dlp = (struct disklabel *)((char *)dlp + sizeof(long))) {
if (dlp->d_magic != DISKMAGIC || dlp->d_magic2 != DISKMAGIC) {
if (msg == NULL)
msg = "no disk label";
} else if (dlp->d_npartitions > MAXPARTITIONS ||
dkcksum(dlp) != 0)
msg = "disk label corrupted";
else {
*lp = *dlp;
msg = NULL;
break;
}
}
bp->b_flags |= B_INVAL | B_AGE;
brelse(bp);
return (msg);
}
/*
* Check new disk label for sensibility before setting it.
*/
int
setdisklabel(olp, nlp, openmask)
register struct disklabel *olp, *nlp;
u_long openmask;
{
register i;
register struct partition *opp, *npp;
/*
* Check it is actually a disklabel we are looking at.
*/
if (nlp->d_magic != DISKMAGIC || nlp->d_magic2 != DISKMAGIC ||
dkcksum(nlp) != 0)
return (EINVAL);
/*
* For each partition that we think is open,
*/
while ((i = ffs((long)openmask)) != 0) {
i--;
/*
* Check it is not changing....
*/
openmask &= ~(1 << i);
if (nlp->d_npartitions <= i)
return (EBUSY);
opp = &olp->d_partitions[i];
npp = &nlp->d_partitions[i];
if (npp->p_offset != opp->p_offset || npp->p_size < opp->p_size)
return (EBUSY);
/*
* Copy internally-set partition information
* if new label doesn't include it. XXX
* (If we are using it then we had better stay the same type)
* This is possibly dubious, as someone else noted (XXX)
*/
if (npp->p_fstype == FS_UNUSED && opp->p_fstype != FS_UNUSED) {
npp->p_fstype = opp->p_fstype;
npp->p_fsize = opp->p_fsize;
npp->p_frag = opp->p_frag;
npp->p_cpg = opp->p_cpg;
}
}
nlp->d_checksum = 0;
nlp->d_checksum = dkcksum(nlp);
*olp = *nlp;
return (0);
}
/*
* Write disk label back to device after modification.
*/
int
writedisklabel(dev, strat, lp)
dev_t dev;
d_strategy_t *strat;
register struct disklabel *lp;
{
struct buf *bp;
struct disklabel *dlp;
int labelpart;
int error = 0;
labelpart = dkpart(dev);
if (lp->d_partitions[labelpart].p_offset != 0) {
if (lp->d_partitions[0].p_offset != 0)
return (EXDEV); /* not quite right */
labelpart = 0;
}
bp = geteblk((int)lp->d_secsize);
bp->b_dev = dkmodpart(dev, labelpart);
bp->b_blkno = LABELSECTOR * ((int)lp->d_secsize/DEV_BSIZE);
bp->b_bcount = lp->d_secsize;
#if 1
/*
* We read the label first to see if it's there,
* in which case we will put ours at the same offset into the block..
* (I think this is stupid [Julian])
* Note that you can't write a label out over a corrupted label!
* (also stupid.. how do you write the first one? by raw writes?)
*/
bp->b_flags &= ~B_INVAL;
bp->b_flags |= B_BUSY | B_READ;
(*strat)(bp);
error = biowait(bp);
if (error)
goto done;
for (dlp = (struct disklabel *)bp->b_data;
dlp <= (struct disklabel *)
((char *)bp->b_data + lp->d_secsize - sizeof(*dlp));
dlp = (struct disklabel *)((char *)dlp + sizeof(long))) {
if (dlp->d_magic == DISKMAGIC && dlp->d_magic2 == DISKMAGIC &&
dkcksum(dlp) == 0) {
*dlp = *lp;
bp->b_flags &= ~(B_DONE | B_READ);
bp->b_flags |= B_BUSY | B_WRITE;
(*strat)(bp);
error = biowait(bp);
goto done;
}
}
error = ESRCH;
done:
#else
bzero(bp->b_data, lp->d_secsize);
dlp = (struct disklabel *)bp->b_data;
*dlp = *lp;
bp->b_flags &= ~B_INVAL;
bp->b_flags |= B_BUSY | B_WRITE;
(*strat)(bp);
error = biowait(bp);
#endif
bp->b_flags |= B_INVAL | B_AGE;
brelse(bp);
return (error);
}
/*
* Compute checksum for disk label.
*/
u_int
dkcksum(lp)
register struct disklabel *lp;
{
register u_short *start, *end;
register u_short sum = 0;
start = (u_short *)lp;
end = (u_short *)&lp->d_partitions[lp->d_npartitions];
while (start < end)
sum ^= *start++;
return (sum);
}
/*
* Disk error is the preface to plaintive error messages
* about failing disk transfers. It prints messages of the form
hp0g: hard error reading fsbn 12345 of 12344-12347 (hp0 bn %d cn %d tn %d sn %d)
* if the offset of the error in the transfer and a disk label
* are both available. blkdone should be -1 if the position of the error
* is unknown; the disklabel pointer may be null from drivers that have not
* been converted to use them. The message is printed with printf
* if pri is LOG_PRINTF, otherwise it uses log at the specified priority.
* The message should be completed (with at least a newline) with printf
* or addlog, respectively. There is no trailing space.
*/
void
diskerr(bp, dname, what, pri, blkdone, lp)
register struct buf *bp;
char *dname, *what;
int pri, blkdone;
register struct disklabel *lp;
{
int unit = dkunit(bp->b_dev);
int slice = dkslice(bp->b_dev);
int part = dkpart(bp->b_dev);
register int (*pr) __P((const char *, ...));
char partname[2];
char *sname;
int sn;
if (pri != LOG_PRINTF) {
log(pri, "");
pr = addlog;
} else
pr = printf;
sname = dsname(dname, unit, slice, part, partname);
(*pr)("%s%s: %s %sing fsbn ", sname, partname, what,
bp->b_flags & B_READ ? "read" : "writ");
sn = bp->b_blkno;
if (bp->b_bcount <= DEV_BSIZE)
(*pr)("%d", sn);
else {
if (blkdone >= 0) {
sn += blkdone;
(*pr)("%d of ", sn);
}
(*pr)("%d-%d", bp->b_blkno,
bp->b_blkno + (bp->b_bcount - 1) / DEV_BSIZE);
}
if (lp && (blkdone >= 0 || bp->b_bcount <= lp->d_secsize)) {
#ifdef tahoe
sn *= DEV_BSIZE / lp->d_secsize; /* XXX */
#endif
sn += lp->d_partitions[part].p_offset;
/*
* XXX should add slice offset and not print the slice,
* but we don't know the slice pointer.
* XXX should print bp->b_pblkno so that this will work
* independent of slices, labels and bad sector remapping,
* but some drivers don't set bp->b_pblkno.
*/
(*pr)(" (%s bn %d; cn %d", sname, sn, sn / lp->d_secpercyl);
sn %= lp->d_secpercyl;
(*pr)(" tn %d sn %d)", sn / lp->d_nsectors, sn % lp->d_nsectors);
}
}