a2ff3c9268
Tested with RTL8188EU, IBSS and STA modes. Reviewed by: kevlo Approved by: adrian (mentor) Differential Revision: https://reviews.freebsd.org/D4038
3939 lines
102 KiB
C
3939 lines
102 KiB
C
/* $OpenBSD: if_urtwn.c,v 1.16 2011/02/10 17:26:40 jakemsr Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 2010 Damien Bergamini <damien.bergamini@free.fr>
|
|
* Copyright (c) 2014 Kevin Lo <kevlo@FreeBSD.org>
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* Driver for Realtek RTL8188CE-VAU/RTL8188CUS/RTL8188EU/RTL8188RU/RTL8192CU.
|
|
*/
|
|
|
|
#include "opt_wlan.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/linker.h>
|
|
#include <sys/firmware.h>
|
|
#include <sys/kdb.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <net/bpf.h>
|
|
#include <net/if.h>
|
|
#include <net/if_var.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
|
|
#include <netinet/in.h>
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in_var.h>
|
|
#include <netinet/if_ether.h>
|
|
#include <netinet/ip.h>
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
#include <net80211/ieee80211_input.h>
|
|
#include <net80211/ieee80211_regdomain.h>
|
|
#include <net80211/ieee80211_radiotap.h>
|
|
#include <net80211/ieee80211_ratectl.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include "usbdevs.h"
|
|
|
|
#define USB_DEBUG_VAR urtwn_debug
|
|
#include <dev/usb/usb_debug.h>
|
|
|
|
#include <dev/usb/wlan/if_urtwnreg.h>
|
|
#include <dev/usb/wlan/if_urtwnvar.h>
|
|
|
|
#ifdef USB_DEBUG
|
|
static int urtwn_debug = 0;
|
|
|
|
SYSCTL_NODE(_hw_usb, OID_AUTO, urtwn, CTLFLAG_RW, 0, "USB urtwn");
|
|
SYSCTL_INT(_hw_usb_urtwn, OID_AUTO, debug, CTLFLAG_RWTUN, &urtwn_debug, 0,
|
|
"Debug level");
|
|
#endif
|
|
|
|
#define IEEE80211_HAS_ADDR4(wh) IEEE80211_IS_DSTODS(wh)
|
|
|
|
/* various supported device vendors/products */
|
|
static const STRUCT_USB_HOST_ID urtwn_devs[] = {
|
|
#define URTWN_DEV(v,p) { USB_VP(USB_VENDOR_##v, USB_PRODUCT_##v##_##p) }
|
|
#define URTWN_RTL8188E_DEV(v,p) \
|
|
{ USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, URTWN_RTL8188E) }
|
|
#define URTWN_RTL8188E 1
|
|
URTWN_DEV(ABOCOM, RTL8188CU_1),
|
|
URTWN_DEV(ABOCOM, RTL8188CU_2),
|
|
URTWN_DEV(ABOCOM, RTL8192CU),
|
|
URTWN_DEV(ASUS, RTL8192CU),
|
|
URTWN_DEV(ASUS, USBN10NANO),
|
|
URTWN_DEV(AZUREWAVE, RTL8188CE_1),
|
|
URTWN_DEV(AZUREWAVE, RTL8188CE_2),
|
|
URTWN_DEV(AZUREWAVE, RTL8188CU),
|
|
URTWN_DEV(BELKIN, F7D2102),
|
|
URTWN_DEV(BELKIN, RTL8188CU),
|
|
URTWN_DEV(BELKIN, RTL8192CU),
|
|
URTWN_DEV(CHICONY, RTL8188CUS_1),
|
|
URTWN_DEV(CHICONY, RTL8188CUS_2),
|
|
URTWN_DEV(CHICONY, RTL8188CUS_3),
|
|
URTWN_DEV(CHICONY, RTL8188CUS_4),
|
|
URTWN_DEV(CHICONY, RTL8188CUS_5),
|
|
URTWN_DEV(COREGA, RTL8192CU),
|
|
URTWN_DEV(DLINK, RTL8188CU),
|
|
URTWN_DEV(DLINK, RTL8192CU_1),
|
|
URTWN_DEV(DLINK, RTL8192CU_2),
|
|
URTWN_DEV(DLINK, RTL8192CU_3),
|
|
URTWN_DEV(DLINK, DWA131B),
|
|
URTWN_DEV(EDIMAX, EW7811UN),
|
|
URTWN_DEV(EDIMAX, RTL8192CU),
|
|
URTWN_DEV(FEIXUN, RTL8188CU),
|
|
URTWN_DEV(FEIXUN, RTL8192CU),
|
|
URTWN_DEV(GUILLEMOT, HWNUP150),
|
|
URTWN_DEV(HAWKING, RTL8192CU),
|
|
URTWN_DEV(HP3, RTL8188CU),
|
|
URTWN_DEV(NETGEAR, WNA1000M),
|
|
URTWN_DEV(NETGEAR, RTL8192CU),
|
|
URTWN_DEV(NETGEAR4, RTL8188CU),
|
|
URTWN_DEV(NOVATECH, RTL8188CU),
|
|
URTWN_DEV(PLANEX2, RTL8188CU_1),
|
|
URTWN_DEV(PLANEX2, RTL8188CU_2),
|
|
URTWN_DEV(PLANEX2, RTL8188CU_3),
|
|
URTWN_DEV(PLANEX2, RTL8188CU_4),
|
|
URTWN_DEV(PLANEX2, RTL8188CUS),
|
|
URTWN_DEV(PLANEX2, RTL8192CU),
|
|
URTWN_DEV(REALTEK, RTL8188CE_0),
|
|
URTWN_DEV(REALTEK, RTL8188CE_1),
|
|
URTWN_DEV(REALTEK, RTL8188CTV),
|
|
URTWN_DEV(REALTEK, RTL8188CU_0),
|
|
URTWN_DEV(REALTEK, RTL8188CU_1),
|
|
URTWN_DEV(REALTEK, RTL8188CU_2),
|
|
URTWN_DEV(REALTEK, RTL8188CU_3),
|
|
URTWN_DEV(REALTEK, RTL8188CU_COMBO),
|
|
URTWN_DEV(REALTEK, RTL8188CUS),
|
|
URTWN_DEV(REALTEK, RTL8188RU_1),
|
|
URTWN_DEV(REALTEK, RTL8188RU_2),
|
|
URTWN_DEV(REALTEK, RTL8188RU_3),
|
|
URTWN_DEV(REALTEK, RTL8191CU),
|
|
URTWN_DEV(REALTEK, RTL8192CE),
|
|
URTWN_DEV(REALTEK, RTL8192CU),
|
|
URTWN_DEV(SITECOMEU, RTL8188CU_1),
|
|
URTWN_DEV(SITECOMEU, RTL8188CU_2),
|
|
URTWN_DEV(SITECOMEU, RTL8192CU),
|
|
URTWN_DEV(TRENDNET, RTL8188CU),
|
|
URTWN_DEV(TRENDNET, RTL8192CU),
|
|
URTWN_DEV(ZYXEL, RTL8192CU),
|
|
/* URTWN_RTL8188E */
|
|
URTWN_RTL8188E_DEV(DLINK, DWA123D1),
|
|
URTWN_RTL8188E_DEV(DLINK, DWA125D1),
|
|
URTWN_RTL8188E_DEV(ELECOM, WDC150SU2M),
|
|
URTWN_RTL8188E_DEV(REALTEK, RTL8188ETV),
|
|
URTWN_RTL8188E_DEV(REALTEK, RTL8188EU),
|
|
#undef URTWN_RTL8188E_DEV
|
|
#undef URTWN_DEV
|
|
};
|
|
|
|
static device_probe_t urtwn_match;
|
|
static device_attach_t urtwn_attach;
|
|
static device_detach_t urtwn_detach;
|
|
|
|
static usb_callback_t urtwn_bulk_tx_callback;
|
|
static usb_callback_t urtwn_bulk_rx_callback;
|
|
|
|
static void urtwn_drain_mbufq(struct urtwn_softc *sc);
|
|
static usb_error_t urtwn_do_request(struct urtwn_softc *,
|
|
struct usb_device_request *, void *);
|
|
static struct ieee80211vap *urtwn_vap_create(struct ieee80211com *,
|
|
const char [IFNAMSIZ], int, enum ieee80211_opmode, int,
|
|
const uint8_t [IEEE80211_ADDR_LEN],
|
|
const uint8_t [IEEE80211_ADDR_LEN]);
|
|
static void urtwn_vap_delete(struct ieee80211vap *);
|
|
static struct mbuf * urtwn_rx_frame(struct urtwn_softc *, uint8_t *, int,
|
|
int *);
|
|
static struct mbuf * urtwn_rxeof(struct usb_xfer *, struct urtwn_data *,
|
|
int *, int8_t *);
|
|
static void urtwn_txeof(struct urtwn_softc *, struct urtwn_data *,
|
|
int);
|
|
static int urtwn_alloc_list(struct urtwn_softc *,
|
|
struct urtwn_data[], int, int);
|
|
static int urtwn_alloc_rx_list(struct urtwn_softc *);
|
|
static int urtwn_alloc_tx_list(struct urtwn_softc *);
|
|
static void urtwn_free_list(struct urtwn_softc *,
|
|
struct urtwn_data data[], int);
|
|
static void urtwn_free_rx_list(struct urtwn_softc *);
|
|
static void urtwn_free_tx_list(struct urtwn_softc *);
|
|
static struct urtwn_data * _urtwn_getbuf(struct urtwn_softc *);
|
|
static struct urtwn_data * urtwn_getbuf(struct urtwn_softc *);
|
|
static int urtwn_write_region_1(struct urtwn_softc *, uint16_t,
|
|
uint8_t *, int);
|
|
static void urtwn_write_1(struct urtwn_softc *, uint16_t, uint8_t);
|
|
static void urtwn_write_2(struct urtwn_softc *, uint16_t, uint16_t);
|
|
static void urtwn_write_4(struct urtwn_softc *, uint16_t, uint32_t);
|
|
static int urtwn_read_region_1(struct urtwn_softc *, uint16_t,
|
|
uint8_t *, int);
|
|
static uint8_t urtwn_read_1(struct urtwn_softc *, uint16_t);
|
|
static uint16_t urtwn_read_2(struct urtwn_softc *, uint16_t);
|
|
static uint32_t urtwn_read_4(struct urtwn_softc *, uint16_t);
|
|
static int urtwn_fw_cmd(struct urtwn_softc *, uint8_t,
|
|
const void *, int);
|
|
static void urtwn_r92c_rf_write(struct urtwn_softc *, int,
|
|
uint8_t, uint32_t);
|
|
static void urtwn_r88e_rf_write(struct urtwn_softc *, int,
|
|
uint8_t, uint32_t);
|
|
static uint32_t urtwn_rf_read(struct urtwn_softc *, int, uint8_t);
|
|
static int urtwn_llt_write(struct urtwn_softc *, uint32_t,
|
|
uint32_t);
|
|
static uint8_t urtwn_efuse_read_1(struct urtwn_softc *, uint16_t);
|
|
static void urtwn_efuse_read(struct urtwn_softc *);
|
|
static void urtwn_efuse_switch_power(struct urtwn_softc *);
|
|
static int urtwn_read_chipid(struct urtwn_softc *);
|
|
static void urtwn_read_rom(struct urtwn_softc *);
|
|
static void urtwn_r88e_read_rom(struct urtwn_softc *);
|
|
static int urtwn_ra_init(struct urtwn_softc *);
|
|
static void urtwn_init_beacon(struct urtwn_softc *,
|
|
struct urtwn_vap *);
|
|
static int urtwn_setup_beacon(struct urtwn_softc *,
|
|
struct ieee80211_node *);
|
|
static void urtwn_update_beacon(struct ieee80211vap *, int);
|
|
static int urtwn_tx_beacon(struct urtwn_softc *sc,
|
|
struct urtwn_vap *);
|
|
static void urtwn_tsf_task_adhoc(void *, int);
|
|
static void urtwn_tsf_sync_enable(struct urtwn_softc *,
|
|
struct ieee80211vap *);
|
|
static void urtwn_set_led(struct urtwn_softc *, int, int);
|
|
static void urtwn_set_mode(struct urtwn_softc *, uint8_t);
|
|
static void urtwn_ibss_recv_mgmt(struct ieee80211_node *,
|
|
struct mbuf *, int,
|
|
const struct ieee80211_rx_stats *, int, int);
|
|
static int urtwn_newstate(struct ieee80211vap *,
|
|
enum ieee80211_state, int);
|
|
static void urtwn_watchdog(void *);
|
|
static void urtwn_update_avgrssi(struct urtwn_softc *, int, int8_t);
|
|
static int8_t urtwn_get_rssi(struct urtwn_softc *, int, void *);
|
|
static int8_t urtwn_r88e_get_rssi(struct urtwn_softc *, int, void *);
|
|
static int urtwn_tx_data(struct urtwn_softc *,
|
|
struct ieee80211_node *, struct mbuf *,
|
|
struct urtwn_data *);
|
|
static void urtwn_tx_start(struct urtwn_softc *, struct mbuf *,
|
|
uint8_t, struct urtwn_data *);
|
|
static int urtwn_transmit(struct ieee80211com *, struct mbuf *);
|
|
static void urtwn_start(struct urtwn_softc *);
|
|
static void urtwn_parent(struct ieee80211com *);
|
|
static int urtwn_r92c_power_on(struct urtwn_softc *);
|
|
static int urtwn_r88e_power_on(struct urtwn_softc *);
|
|
static int urtwn_llt_init(struct urtwn_softc *);
|
|
static void urtwn_fw_reset(struct urtwn_softc *);
|
|
static void urtwn_r88e_fw_reset(struct urtwn_softc *);
|
|
static int urtwn_fw_loadpage(struct urtwn_softc *, int,
|
|
const uint8_t *, int);
|
|
static int urtwn_load_firmware(struct urtwn_softc *);
|
|
static int urtwn_r92c_dma_init(struct urtwn_softc *);
|
|
static int urtwn_r88e_dma_init(struct urtwn_softc *);
|
|
static void urtwn_mac_init(struct urtwn_softc *);
|
|
static void urtwn_bb_init(struct urtwn_softc *);
|
|
static void urtwn_rf_init(struct urtwn_softc *);
|
|
static void urtwn_cam_init(struct urtwn_softc *);
|
|
static void urtwn_pa_bias_init(struct urtwn_softc *);
|
|
static void urtwn_rxfilter_init(struct urtwn_softc *);
|
|
static void urtwn_edca_init(struct urtwn_softc *);
|
|
static void urtwn_write_txpower(struct urtwn_softc *, int,
|
|
uint16_t[]);
|
|
static void urtwn_get_txpower(struct urtwn_softc *, int,
|
|
struct ieee80211_channel *,
|
|
struct ieee80211_channel *, uint16_t[]);
|
|
static void urtwn_r88e_get_txpower(struct urtwn_softc *, int,
|
|
struct ieee80211_channel *,
|
|
struct ieee80211_channel *, uint16_t[]);
|
|
static void urtwn_set_txpower(struct urtwn_softc *,
|
|
struct ieee80211_channel *,
|
|
struct ieee80211_channel *);
|
|
static void urtwn_set_rx_bssid_all(struct urtwn_softc *, int);
|
|
static void urtwn_set_gain(struct urtwn_softc *, uint8_t);
|
|
static void urtwn_scan_start(struct ieee80211com *);
|
|
static void urtwn_scan_end(struct ieee80211com *);
|
|
static void urtwn_set_channel(struct ieee80211com *);
|
|
static void urtwn_set_promisc(struct urtwn_softc *);
|
|
static void urtwn_update_promisc(struct ieee80211com *);
|
|
static void urtwn_update_mcast(struct ieee80211com *);
|
|
static void urtwn_set_chan(struct urtwn_softc *,
|
|
struct ieee80211_channel *,
|
|
struct ieee80211_channel *);
|
|
static void urtwn_iq_calib(struct urtwn_softc *);
|
|
static void urtwn_lc_calib(struct urtwn_softc *);
|
|
static void urtwn_init(struct urtwn_softc *);
|
|
static void urtwn_stop(struct urtwn_softc *);
|
|
static void urtwn_abort_xfers(struct urtwn_softc *);
|
|
static int urtwn_raw_xmit(struct ieee80211_node *, struct mbuf *,
|
|
const struct ieee80211_bpf_params *);
|
|
static void urtwn_ms_delay(struct urtwn_softc *);
|
|
|
|
/* Aliases. */
|
|
#define urtwn_bb_write urtwn_write_4
|
|
#define urtwn_bb_read urtwn_read_4
|
|
|
|
static const struct usb_config urtwn_config[URTWN_N_TRANSFER] = {
|
|
[URTWN_BULK_RX] = {
|
|
.type = UE_BULK,
|
|
.endpoint = UE_ADDR_ANY,
|
|
.direction = UE_DIR_IN,
|
|
.bufsize = URTWN_RXBUFSZ,
|
|
.flags = {
|
|
.pipe_bof = 1,
|
|
.short_xfer_ok = 1
|
|
},
|
|
.callback = urtwn_bulk_rx_callback,
|
|
},
|
|
[URTWN_BULK_TX_BE] = {
|
|
.type = UE_BULK,
|
|
.endpoint = 0x03,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = URTWN_TXBUFSZ,
|
|
.flags = {
|
|
.ext_buffer = 1,
|
|
.pipe_bof = 1,
|
|
.force_short_xfer = 1
|
|
},
|
|
.callback = urtwn_bulk_tx_callback,
|
|
.timeout = URTWN_TX_TIMEOUT, /* ms */
|
|
},
|
|
[URTWN_BULK_TX_BK] = {
|
|
.type = UE_BULK,
|
|
.endpoint = 0x03,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = URTWN_TXBUFSZ,
|
|
.flags = {
|
|
.ext_buffer = 1,
|
|
.pipe_bof = 1,
|
|
.force_short_xfer = 1,
|
|
},
|
|
.callback = urtwn_bulk_tx_callback,
|
|
.timeout = URTWN_TX_TIMEOUT, /* ms */
|
|
},
|
|
[URTWN_BULK_TX_VI] = {
|
|
.type = UE_BULK,
|
|
.endpoint = 0x02,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = URTWN_TXBUFSZ,
|
|
.flags = {
|
|
.ext_buffer = 1,
|
|
.pipe_bof = 1,
|
|
.force_short_xfer = 1
|
|
},
|
|
.callback = urtwn_bulk_tx_callback,
|
|
.timeout = URTWN_TX_TIMEOUT, /* ms */
|
|
},
|
|
[URTWN_BULK_TX_VO] = {
|
|
.type = UE_BULK,
|
|
.endpoint = 0x02,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = URTWN_TXBUFSZ,
|
|
.flags = {
|
|
.ext_buffer = 1,
|
|
.pipe_bof = 1,
|
|
.force_short_xfer = 1
|
|
},
|
|
.callback = urtwn_bulk_tx_callback,
|
|
.timeout = URTWN_TX_TIMEOUT, /* ms */
|
|
},
|
|
};
|
|
|
|
static int
|
|
urtwn_match(device_t self)
|
|
{
|
|
struct usb_attach_arg *uaa = device_get_ivars(self);
|
|
|
|
if (uaa->usb_mode != USB_MODE_HOST)
|
|
return (ENXIO);
|
|
if (uaa->info.bConfigIndex != URTWN_CONFIG_INDEX)
|
|
return (ENXIO);
|
|
if (uaa->info.bIfaceIndex != URTWN_IFACE_INDEX)
|
|
return (ENXIO);
|
|
|
|
return (usbd_lookup_id_by_uaa(urtwn_devs, sizeof(urtwn_devs), uaa));
|
|
}
|
|
|
|
static int
|
|
urtwn_attach(device_t self)
|
|
{
|
|
struct usb_attach_arg *uaa = device_get_ivars(self);
|
|
struct urtwn_softc *sc = device_get_softc(self);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint8_t iface_index, bands;
|
|
int error;
|
|
|
|
device_set_usb_desc(self);
|
|
sc->sc_udev = uaa->device;
|
|
sc->sc_dev = self;
|
|
if (USB_GET_DRIVER_INFO(uaa) == URTWN_RTL8188E)
|
|
sc->chip |= URTWN_CHIP_88E;
|
|
|
|
mtx_init(&sc->sc_mtx, device_get_nameunit(self),
|
|
MTX_NETWORK_LOCK, MTX_DEF);
|
|
callout_init(&sc->sc_watchdog_ch, 0);
|
|
mbufq_init(&sc->sc_snd, ifqmaxlen);
|
|
|
|
iface_index = URTWN_IFACE_INDEX;
|
|
error = usbd_transfer_setup(uaa->device, &iface_index, sc->sc_xfer,
|
|
urtwn_config, URTWN_N_TRANSFER, sc, &sc->sc_mtx);
|
|
if (error) {
|
|
device_printf(self, "could not allocate USB transfers, "
|
|
"err=%s\n", usbd_errstr(error));
|
|
goto detach;
|
|
}
|
|
|
|
URTWN_LOCK(sc);
|
|
|
|
error = urtwn_read_chipid(sc);
|
|
if (error) {
|
|
device_printf(sc->sc_dev, "unsupported test chip\n");
|
|
URTWN_UNLOCK(sc);
|
|
goto detach;
|
|
}
|
|
|
|
/* Determine number of Tx/Rx chains. */
|
|
if (sc->chip & URTWN_CHIP_92C) {
|
|
sc->ntxchains = (sc->chip & URTWN_CHIP_92C_1T2R) ? 1 : 2;
|
|
sc->nrxchains = 2;
|
|
} else {
|
|
sc->ntxchains = 1;
|
|
sc->nrxchains = 1;
|
|
}
|
|
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
urtwn_r88e_read_rom(sc);
|
|
else
|
|
urtwn_read_rom(sc);
|
|
|
|
device_printf(sc->sc_dev, "MAC/BB RTL%s, RF 6052 %dT%dR\n",
|
|
(sc->chip & URTWN_CHIP_92C) ? "8192CU" :
|
|
(sc->chip & URTWN_CHIP_88E) ? "8188EU" :
|
|
(sc->board_type == R92C_BOARD_TYPE_HIGHPA) ? "8188RU" :
|
|
(sc->board_type == R92C_BOARD_TYPE_MINICARD) ? "8188CE-VAU" :
|
|
"8188CUS", sc->ntxchains, sc->nrxchains);
|
|
|
|
URTWN_UNLOCK(sc);
|
|
|
|
ic->ic_softc = sc;
|
|
ic->ic_name = device_get_nameunit(self);
|
|
ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
|
|
ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */
|
|
|
|
/* set device capabilities */
|
|
ic->ic_caps =
|
|
IEEE80211_C_STA /* station mode */
|
|
| IEEE80211_C_MONITOR /* monitor mode */
|
|
| IEEE80211_C_IBSS /* adhoc mode */
|
|
| IEEE80211_C_HOSTAP /* hostap mode */
|
|
| IEEE80211_C_SHPREAMBLE /* short preamble supported */
|
|
| IEEE80211_C_SHSLOT /* short slot time supported */
|
|
| IEEE80211_C_BGSCAN /* capable of bg scanning */
|
|
| IEEE80211_C_WPA /* 802.11i */
|
|
;
|
|
|
|
bands = 0;
|
|
setbit(&bands, IEEE80211_MODE_11B);
|
|
setbit(&bands, IEEE80211_MODE_11G);
|
|
ieee80211_init_channels(ic, NULL, &bands);
|
|
|
|
ieee80211_ifattach(ic);
|
|
ic->ic_raw_xmit = urtwn_raw_xmit;
|
|
ic->ic_scan_start = urtwn_scan_start;
|
|
ic->ic_scan_end = urtwn_scan_end;
|
|
ic->ic_set_channel = urtwn_set_channel;
|
|
ic->ic_transmit = urtwn_transmit;
|
|
ic->ic_parent = urtwn_parent;
|
|
ic->ic_vap_create = urtwn_vap_create;
|
|
ic->ic_vap_delete = urtwn_vap_delete;
|
|
ic->ic_update_promisc = urtwn_update_promisc;
|
|
ic->ic_update_mcast = urtwn_update_mcast;
|
|
|
|
ieee80211_radiotap_attach(ic, &sc->sc_txtap.wt_ihdr,
|
|
sizeof(sc->sc_txtap), URTWN_TX_RADIOTAP_PRESENT,
|
|
&sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap),
|
|
URTWN_RX_RADIOTAP_PRESENT);
|
|
|
|
if (bootverbose)
|
|
ieee80211_announce(ic);
|
|
|
|
return (0);
|
|
|
|
detach:
|
|
urtwn_detach(self);
|
|
return (ENXIO); /* failure */
|
|
}
|
|
|
|
static int
|
|
urtwn_detach(device_t self)
|
|
{
|
|
struct urtwn_softc *sc = device_get_softc(self);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
unsigned int x;
|
|
|
|
/* Prevent further ioctls. */
|
|
URTWN_LOCK(sc);
|
|
sc->sc_flags |= URTWN_DETACHED;
|
|
urtwn_stop(sc);
|
|
URTWN_UNLOCK(sc);
|
|
|
|
callout_drain(&sc->sc_watchdog_ch);
|
|
|
|
/* stop all USB transfers */
|
|
usbd_transfer_unsetup(sc->sc_xfer, URTWN_N_TRANSFER);
|
|
|
|
/* Prevent further allocations from RX/TX data lists. */
|
|
URTWN_LOCK(sc);
|
|
STAILQ_INIT(&sc->sc_tx_active);
|
|
STAILQ_INIT(&sc->sc_tx_inactive);
|
|
STAILQ_INIT(&sc->sc_tx_pending);
|
|
|
|
STAILQ_INIT(&sc->sc_rx_active);
|
|
STAILQ_INIT(&sc->sc_rx_inactive);
|
|
URTWN_UNLOCK(sc);
|
|
|
|
/* drain USB transfers */
|
|
for (x = 0; x != URTWN_N_TRANSFER; x++)
|
|
usbd_transfer_drain(sc->sc_xfer[x]);
|
|
|
|
/* Free data buffers. */
|
|
URTWN_LOCK(sc);
|
|
urtwn_free_tx_list(sc);
|
|
urtwn_free_rx_list(sc);
|
|
URTWN_UNLOCK(sc);
|
|
|
|
ieee80211_ifdetach(ic);
|
|
mtx_destroy(&sc->sc_mtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
urtwn_drain_mbufq(struct urtwn_softc *sc)
|
|
{
|
|
struct mbuf *m;
|
|
struct ieee80211_node *ni;
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) {
|
|
ni = (struct ieee80211_node *)m->m_pkthdr.rcvif;
|
|
m->m_pkthdr.rcvif = NULL;
|
|
ieee80211_free_node(ni);
|
|
m_freem(m);
|
|
}
|
|
}
|
|
|
|
static usb_error_t
|
|
urtwn_do_request(struct urtwn_softc *sc, struct usb_device_request *req,
|
|
void *data)
|
|
{
|
|
usb_error_t err;
|
|
int ntries = 10;
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
|
|
while (ntries--) {
|
|
err = usbd_do_request_flags(sc->sc_udev, &sc->sc_mtx,
|
|
req, data, 0, NULL, 250 /* ms */);
|
|
if (err == 0)
|
|
break;
|
|
|
|
DPRINTFN(1, "Control request failed, %s (retrying)\n",
|
|
usbd_errstr(err));
|
|
usb_pause_mtx(&sc->sc_mtx, hz / 100);
|
|
}
|
|
return (err);
|
|
}
|
|
|
|
static struct ieee80211vap *
|
|
urtwn_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit,
|
|
enum ieee80211_opmode opmode, int flags,
|
|
const uint8_t bssid[IEEE80211_ADDR_LEN],
|
|
const uint8_t mac[IEEE80211_ADDR_LEN])
|
|
{
|
|
struct urtwn_softc *sc = ic->ic_softc;
|
|
struct urtwn_vap *uvp;
|
|
struct ieee80211vap *vap;
|
|
|
|
if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */
|
|
return (NULL);
|
|
|
|
uvp = malloc(sizeof(struct urtwn_vap), M_80211_VAP, M_WAITOK | M_ZERO);
|
|
vap = &uvp->vap;
|
|
/* enable s/w bmiss handling for sta mode */
|
|
|
|
if (ieee80211_vap_setup(ic, vap, name, unit, opmode,
|
|
flags | IEEE80211_CLONE_NOBEACONS, bssid) != 0) {
|
|
/* out of memory */
|
|
free(uvp, M_80211_VAP);
|
|
return (NULL);
|
|
}
|
|
|
|
if (opmode == IEEE80211_M_HOSTAP || opmode == IEEE80211_M_IBSS)
|
|
urtwn_init_beacon(sc, uvp);
|
|
|
|
/* override state transition machine */
|
|
uvp->newstate = vap->iv_newstate;
|
|
vap->iv_newstate = urtwn_newstate;
|
|
vap->iv_update_beacon = urtwn_update_beacon;
|
|
if (opmode == IEEE80211_M_IBSS) {
|
|
uvp->recv_mgmt = vap->iv_recv_mgmt;
|
|
vap->iv_recv_mgmt = urtwn_ibss_recv_mgmt;
|
|
TASK_INIT(&uvp->tsf_task_adhoc, 0, urtwn_tsf_task_adhoc, vap);
|
|
}
|
|
|
|
/* complete setup */
|
|
ieee80211_vap_attach(vap, ieee80211_media_change,
|
|
ieee80211_media_status, mac);
|
|
ic->ic_opmode = opmode;
|
|
return (vap);
|
|
}
|
|
|
|
static void
|
|
urtwn_vap_delete(struct ieee80211vap *vap)
|
|
{
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
struct urtwn_vap *uvp = URTWN_VAP(vap);
|
|
|
|
if (uvp->bcn_mbuf != NULL)
|
|
m_freem(uvp->bcn_mbuf);
|
|
if (vap->iv_opmode == IEEE80211_M_IBSS)
|
|
ieee80211_draintask(ic, &uvp->tsf_task_adhoc);
|
|
ieee80211_vap_detach(vap);
|
|
free(uvp, M_80211_VAP);
|
|
}
|
|
|
|
static struct mbuf *
|
|
urtwn_rx_frame(struct urtwn_softc *sc, uint8_t *buf, int pktlen, int *rssi_p)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211_frame *wh;
|
|
struct mbuf *m;
|
|
struct r92c_rx_stat *stat;
|
|
uint32_t rxdw0, rxdw3;
|
|
uint8_t rate;
|
|
int8_t rssi = 0;
|
|
int infosz;
|
|
|
|
/*
|
|
* don't pass packets to the ieee80211 framework if the driver isn't
|
|
* RUNNING.
|
|
*/
|
|
if (!(sc->sc_flags & URTWN_RUNNING))
|
|
return (NULL);
|
|
|
|
stat = (struct r92c_rx_stat *)buf;
|
|
rxdw0 = le32toh(stat->rxdw0);
|
|
rxdw3 = le32toh(stat->rxdw3);
|
|
|
|
if (rxdw0 & (R92C_RXDW0_CRCERR | R92C_RXDW0_ICVERR)) {
|
|
/*
|
|
* This should not happen since we setup our Rx filter
|
|
* to not receive these frames.
|
|
*/
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
return (NULL);
|
|
}
|
|
if (pktlen < sizeof(struct ieee80211_frame_ack) ||
|
|
pktlen > MCLBYTES) {
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
return (NULL);
|
|
}
|
|
|
|
rate = MS(rxdw3, R92C_RXDW3_RATE);
|
|
infosz = MS(rxdw0, R92C_RXDW0_INFOSZ) * 8;
|
|
|
|
/* Get RSSI from PHY status descriptor if present. */
|
|
if (infosz != 0 && (rxdw0 & R92C_RXDW0_PHYST)) {
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
rssi = urtwn_r88e_get_rssi(sc, rate, &stat[1]);
|
|
else
|
|
rssi = urtwn_get_rssi(sc, rate, &stat[1]);
|
|
/* Update our average RSSI. */
|
|
urtwn_update_avgrssi(sc, rate, rssi);
|
|
}
|
|
|
|
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
|
|
if (m == NULL) {
|
|
device_printf(sc->sc_dev, "could not create RX mbuf\n");
|
|
return (NULL);
|
|
}
|
|
|
|
/* Finalize mbuf. */
|
|
wh = (struct ieee80211_frame *)((uint8_t *)&stat[1] + infosz);
|
|
memcpy(mtod(m, uint8_t *), wh, pktlen);
|
|
m->m_pkthdr.len = m->m_len = pktlen;
|
|
|
|
if (ieee80211_radiotap_active(ic)) {
|
|
struct urtwn_rx_radiotap_header *tap = &sc->sc_rxtap;
|
|
|
|
tap->wr_flags = 0;
|
|
/* Map HW rate index to 802.11 rate. */
|
|
if (!(rxdw3 & R92C_RXDW3_HT)) {
|
|
tap->wr_rate = ridx2rate[rate];
|
|
} else if (rate >= 12) { /* MCS0~15. */
|
|
/* Bit 7 set means HT MCS instead of rate. */
|
|
tap->wr_rate = 0x80 | (rate - 12);
|
|
}
|
|
tap->wr_dbm_antsignal = rssi;
|
|
tap->wr_dbm_antnoise = URTWN_NOISE_FLOOR;
|
|
tap->wr_chan_freq = htole16(ic->ic_curchan->ic_freq);
|
|
tap->wr_chan_flags = htole16(ic->ic_curchan->ic_flags);
|
|
}
|
|
|
|
*rssi_p = rssi;
|
|
|
|
return (m);
|
|
}
|
|
|
|
static struct mbuf *
|
|
urtwn_rxeof(struct usb_xfer *xfer, struct urtwn_data *data, int *rssi,
|
|
int8_t *nf)
|
|
{
|
|
struct urtwn_softc *sc = data->sc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct r92c_rx_stat *stat;
|
|
struct mbuf *m, *m0 = NULL, *prevm = NULL;
|
|
uint32_t rxdw0;
|
|
uint8_t *buf;
|
|
int len, totlen, pktlen, infosz, npkts;
|
|
|
|
usbd_xfer_status(xfer, &len, NULL, NULL, NULL);
|
|
|
|
if (len < sizeof(*stat)) {
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
return (NULL);
|
|
}
|
|
|
|
buf = data->buf;
|
|
/* Get the number of encapsulated frames. */
|
|
stat = (struct r92c_rx_stat *)buf;
|
|
npkts = MS(le32toh(stat->rxdw2), R92C_RXDW2_PKTCNT);
|
|
DPRINTFN(6, "Rx %d frames in one chunk\n", npkts);
|
|
|
|
/* Process all of them. */
|
|
while (npkts-- > 0) {
|
|
if (len < sizeof(*stat))
|
|
break;
|
|
stat = (struct r92c_rx_stat *)buf;
|
|
rxdw0 = le32toh(stat->rxdw0);
|
|
|
|
pktlen = MS(rxdw0, R92C_RXDW0_PKTLEN);
|
|
if (pktlen == 0)
|
|
break;
|
|
|
|
infosz = MS(rxdw0, R92C_RXDW0_INFOSZ) * 8;
|
|
|
|
/* Make sure everything fits in xfer. */
|
|
totlen = sizeof(*stat) + infosz + pktlen;
|
|
if (totlen > len)
|
|
break;
|
|
|
|
m = urtwn_rx_frame(sc, buf, pktlen, rssi);
|
|
if (m0 == NULL)
|
|
m0 = m;
|
|
if (prevm == NULL)
|
|
prevm = m;
|
|
else {
|
|
prevm->m_next = m;
|
|
prevm = m;
|
|
}
|
|
|
|
/* Next chunk is 128-byte aligned. */
|
|
totlen = (totlen + 127) & ~127;
|
|
buf += totlen;
|
|
len -= totlen;
|
|
}
|
|
|
|
return (m0);
|
|
}
|
|
|
|
static void
|
|
urtwn_bulk_rx_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct urtwn_softc *sc = usbd_xfer_softc(xfer);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211_frame_min *wh;
|
|
struct ieee80211_node *ni;
|
|
struct mbuf *m = NULL, *next;
|
|
struct urtwn_data *data;
|
|
int8_t nf;
|
|
int rssi = 1;
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_TRANSFERRED:
|
|
data = STAILQ_FIRST(&sc->sc_rx_active);
|
|
if (data == NULL)
|
|
goto tr_setup;
|
|
STAILQ_REMOVE_HEAD(&sc->sc_rx_active, next);
|
|
m = urtwn_rxeof(xfer, data, &rssi, &nf);
|
|
STAILQ_INSERT_TAIL(&sc->sc_rx_inactive, data, next);
|
|
/* FALLTHROUGH */
|
|
case USB_ST_SETUP:
|
|
tr_setup:
|
|
data = STAILQ_FIRST(&sc->sc_rx_inactive);
|
|
if (data == NULL) {
|
|
KASSERT(m == NULL, ("mbuf isn't NULL"));
|
|
return;
|
|
}
|
|
STAILQ_REMOVE_HEAD(&sc->sc_rx_inactive, next);
|
|
STAILQ_INSERT_TAIL(&sc->sc_rx_active, data, next);
|
|
usbd_xfer_set_frame_data(xfer, 0, data->buf,
|
|
usbd_xfer_max_len(xfer));
|
|
usbd_transfer_submit(xfer);
|
|
|
|
/*
|
|
* To avoid LOR we should unlock our private mutex here to call
|
|
* ieee80211_input() because here is at the end of a USB
|
|
* callback and safe to unlock.
|
|
*/
|
|
URTWN_UNLOCK(sc);
|
|
while (m != NULL) {
|
|
next = m->m_next;
|
|
m->m_next = NULL;
|
|
wh = mtod(m, struct ieee80211_frame_min *);
|
|
if (m->m_len >= sizeof(*wh))
|
|
ni = ieee80211_find_rxnode(ic, wh);
|
|
else
|
|
ni = NULL;
|
|
nf = URTWN_NOISE_FLOOR;
|
|
if (ni != NULL) {
|
|
(void)ieee80211_input(ni, m, rssi - nf, nf);
|
|
ieee80211_free_node(ni);
|
|
} else {
|
|
(void)ieee80211_input_all(ic, m, rssi - nf,
|
|
nf);
|
|
}
|
|
m = next;
|
|
}
|
|
URTWN_LOCK(sc);
|
|
break;
|
|
default:
|
|
/* needs it to the inactive queue due to a error. */
|
|
data = STAILQ_FIRST(&sc->sc_rx_active);
|
|
if (data != NULL) {
|
|
STAILQ_REMOVE_HEAD(&sc->sc_rx_active, next);
|
|
STAILQ_INSERT_TAIL(&sc->sc_rx_inactive, data, next);
|
|
}
|
|
if (error != USB_ERR_CANCELLED) {
|
|
usbd_xfer_set_stall(xfer);
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
goto tr_setup;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_txeof(struct urtwn_softc *sc, struct urtwn_data *data, int status)
|
|
{
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
|
|
if (data->ni != NULL) /* not a beacon frame */
|
|
ieee80211_tx_complete(data->ni, data->m, status);
|
|
|
|
data->ni = NULL;
|
|
data->m = NULL;
|
|
|
|
sc->sc_txtimer = 0;
|
|
|
|
STAILQ_INSERT_TAIL(&sc->sc_tx_inactive, data, next);
|
|
}
|
|
|
|
static int
|
|
urtwn_alloc_list(struct urtwn_softc *sc, struct urtwn_data data[],
|
|
int ndata, int maxsz)
|
|
{
|
|
int i, error;
|
|
|
|
for (i = 0; i < ndata; i++) {
|
|
struct urtwn_data *dp = &data[i];
|
|
dp->sc = sc;
|
|
dp->m = NULL;
|
|
dp->buf = malloc(maxsz, M_USBDEV, M_NOWAIT);
|
|
if (dp->buf == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"could not allocate buffer\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
dp->ni = NULL;
|
|
}
|
|
|
|
return (0);
|
|
fail:
|
|
urtwn_free_list(sc, data, ndata);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
urtwn_alloc_rx_list(struct urtwn_softc *sc)
|
|
{
|
|
int error, i;
|
|
|
|
error = urtwn_alloc_list(sc, sc->sc_rx, URTWN_RX_LIST_COUNT,
|
|
URTWN_RXBUFSZ);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
STAILQ_INIT(&sc->sc_rx_active);
|
|
STAILQ_INIT(&sc->sc_rx_inactive);
|
|
|
|
for (i = 0; i < URTWN_RX_LIST_COUNT; i++)
|
|
STAILQ_INSERT_HEAD(&sc->sc_rx_inactive, &sc->sc_rx[i], next);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
urtwn_alloc_tx_list(struct urtwn_softc *sc)
|
|
{
|
|
int error, i;
|
|
|
|
error = urtwn_alloc_list(sc, sc->sc_tx, URTWN_TX_LIST_COUNT,
|
|
URTWN_TXBUFSZ);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
STAILQ_INIT(&sc->sc_tx_active);
|
|
STAILQ_INIT(&sc->sc_tx_inactive);
|
|
STAILQ_INIT(&sc->sc_tx_pending);
|
|
|
|
for (i = 0; i < URTWN_TX_LIST_COUNT; i++)
|
|
STAILQ_INSERT_HEAD(&sc->sc_tx_inactive, &sc->sc_tx[i], next);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
urtwn_free_list(struct urtwn_softc *sc, struct urtwn_data data[], int ndata)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ndata; i++) {
|
|
struct urtwn_data *dp = &data[i];
|
|
|
|
if (dp->buf != NULL) {
|
|
free(dp->buf, M_USBDEV);
|
|
dp->buf = NULL;
|
|
}
|
|
if (dp->ni != NULL) {
|
|
ieee80211_free_node(dp->ni);
|
|
dp->ni = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_free_rx_list(struct urtwn_softc *sc)
|
|
{
|
|
urtwn_free_list(sc, sc->sc_rx, URTWN_RX_LIST_COUNT);
|
|
}
|
|
|
|
static void
|
|
urtwn_free_tx_list(struct urtwn_softc *sc)
|
|
{
|
|
urtwn_free_list(sc, sc->sc_tx, URTWN_TX_LIST_COUNT);
|
|
}
|
|
|
|
static void
|
|
urtwn_bulk_tx_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct urtwn_softc *sc = usbd_xfer_softc(xfer);
|
|
struct urtwn_data *data;
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
|
|
switch (USB_GET_STATE(xfer)){
|
|
case USB_ST_TRANSFERRED:
|
|
data = STAILQ_FIRST(&sc->sc_tx_active);
|
|
if (data == NULL)
|
|
goto tr_setup;
|
|
STAILQ_REMOVE_HEAD(&sc->sc_tx_active, next);
|
|
urtwn_txeof(sc, data, 0);
|
|
/* FALLTHROUGH */
|
|
case USB_ST_SETUP:
|
|
tr_setup:
|
|
data = STAILQ_FIRST(&sc->sc_tx_pending);
|
|
if (data == NULL) {
|
|
DPRINTF("%s: empty pending queue\n", __func__);
|
|
goto finish;
|
|
}
|
|
STAILQ_REMOVE_HEAD(&sc->sc_tx_pending, next);
|
|
STAILQ_INSERT_TAIL(&sc->sc_tx_active, data, next);
|
|
usbd_xfer_set_frame_data(xfer, 0, data->buf, data->buflen);
|
|
usbd_transfer_submit(xfer);
|
|
break;
|
|
default:
|
|
data = STAILQ_FIRST(&sc->sc_tx_active);
|
|
if (data == NULL)
|
|
goto tr_setup;
|
|
STAILQ_REMOVE_HEAD(&sc->sc_tx_active, next);
|
|
urtwn_txeof(sc, data, 1);
|
|
if (error != USB_ERR_CANCELLED) {
|
|
usbd_xfer_set_stall(xfer);
|
|
goto tr_setup;
|
|
}
|
|
break;
|
|
}
|
|
finish:
|
|
/* Kick-start more transmit */
|
|
urtwn_start(sc);
|
|
}
|
|
|
|
static struct urtwn_data *
|
|
_urtwn_getbuf(struct urtwn_softc *sc)
|
|
{
|
|
struct urtwn_data *bf;
|
|
|
|
bf = STAILQ_FIRST(&sc->sc_tx_inactive);
|
|
if (bf != NULL)
|
|
STAILQ_REMOVE_HEAD(&sc->sc_tx_inactive, next);
|
|
else
|
|
DPRINTF("%s: %s\n", __func__, "out of xmit buffers");
|
|
return (bf);
|
|
}
|
|
|
|
static struct urtwn_data *
|
|
urtwn_getbuf(struct urtwn_softc *sc)
|
|
{
|
|
struct urtwn_data *bf;
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
|
|
bf = _urtwn_getbuf(sc);
|
|
if (bf == NULL)
|
|
DPRINTF("%s: stop queue\n", __func__);
|
|
return (bf);
|
|
}
|
|
|
|
static int
|
|
urtwn_write_region_1(struct urtwn_softc *sc, uint16_t addr, uint8_t *buf,
|
|
int len)
|
|
{
|
|
usb_device_request_t req;
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = R92C_REQ_REGS;
|
|
USETW(req.wValue, addr);
|
|
USETW(req.wIndex, 0);
|
|
USETW(req.wLength, len);
|
|
return (urtwn_do_request(sc, &req, buf));
|
|
}
|
|
|
|
static void
|
|
urtwn_write_1(struct urtwn_softc *sc, uint16_t addr, uint8_t val)
|
|
{
|
|
urtwn_write_region_1(sc, addr, &val, 1);
|
|
}
|
|
|
|
|
|
static void
|
|
urtwn_write_2(struct urtwn_softc *sc, uint16_t addr, uint16_t val)
|
|
{
|
|
val = htole16(val);
|
|
urtwn_write_region_1(sc, addr, (uint8_t *)&val, 2);
|
|
}
|
|
|
|
static void
|
|
urtwn_write_4(struct urtwn_softc *sc, uint16_t addr, uint32_t val)
|
|
{
|
|
val = htole32(val);
|
|
urtwn_write_region_1(sc, addr, (uint8_t *)&val, 4);
|
|
}
|
|
|
|
static int
|
|
urtwn_read_region_1(struct urtwn_softc *sc, uint16_t addr, uint8_t *buf,
|
|
int len)
|
|
{
|
|
usb_device_request_t req;
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = R92C_REQ_REGS;
|
|
USETW(req.wValue, addr);
|
|
USETW(req.wIndex, 0);
|
|
USETW(req.wLength, len);
|
|
return (urtwn_do_request(sc, &req, buf));
|
|
}
|
|
|
|
static uint8_t
|
|
urtwn_read_1(struct urtwn_softc *sc, uint16_t addr)
|
|
{
|
|
uint8_t val;
|
|
|
|
if (urtwn_read_region_1(sc, addr, &val, 1) != 0)
|
|
return (0xff);
|
|
return (val);
|
|
}
|
|
|
|
static uint16_t
|
|
urtwn_read_2(struct urtwn_softc *sc, uint16_t addr)
|
|
{
|
|
uint16_t val;
|
|
|
|
if (urtwn_read_region_1(sc, addr, (uint8_t *)&val, 2) != 0)
|
|
return (0xffff);
|
|
return (le16toh(val));
|
|
}
|
|
|
|
static uint32_t
|
|
urtwn_read_4(struct urtwn_softc *sc, uint16_t addr)
|
|
{
|
|
uint32_t val;
|
|
|
|
if (urtwn_read_region_1(sc, addr, (uint8_t *)&val, 4) != 0)
|
|
return (0xffffffff);
|
|
return (le32toh(val));
|
|
}
|
|
|
|
static int
|
|
urtwn_fw_cmd(struct urtwn_softc *sc, uint8_t id, const void *buf, int len)
|
|
{
|
|
struct r92c_fw_cmd cmd;
|
|
int ntries;
|
|
|
|
/* Wait for current FW box to be empty. */
|
|
for (ntries = 0; ntries < 100; ntries++) {
|
|
if (!(urtwn_read_1(sc, R92C_HMETFR) & (1 << sc->fwcur)))
|
|
break;
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
if (ntries == 100) {
|
|
device_printf(sc->sc_dev,
|
|
"could not send firmware command\n");
|
|
return (ETIMEDOUT);
|
|
}
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.id = id;
|
|
if (len > 3)
|
|
cmd.id |= R92C_CMD_FLAG_EXT;
|
|
KASSERT(len <= sizeof(cmd.msg), ("urtwn_fw_cmd\n"));
|
|
memcpy(cmd.msg, buf, len);
|
|
|
|
/* Write the first word last since that will trigger the FW. */
|
|
urtwn_write_region_1(sc, R92C_HMEBOX_EXT(sc->fwcur),
|
|
(uint8_t *)&cmd + 4, 2);
|
|
urtwn_write_region_1(sc, R92C_HMEBOX(sc->fwcur),
|
|
(uint8_t *)&cmd + 0, 4);
|
|
|
|
sc->fwcur = (sc->fwcur + 1) % R92C_H2C_NBOX;
|
|
return (0);
|
|
}
|
|
|
|
static __inline void
|
|
urtwn_rf_write(struct urtwn_softc *sc, int chain, uint8_t addr, uint32_t val)
|
|
{
|
|
|
|
sc->sc_rf_write(sc, chain, addr, val);
|
|
}
|
|
|
|
static void
|
|
urtwn_r92c_rf_write(struct urtwn_softc *sc, int chain, uint8_t addr,
|
|
uint32_t val)
|
|
{
|
|
urtwn_bb_write(sc, R92C_LSSI_PARAM(chain),
|
|
SM(R92C_LSSI_PARAM_ADDR, addr) |
|
|
SM(R92C_LSSI_PARAM_DATA, val));
|
|
}
|
|
|
|
static void
|
|
urtwn_r88e_rf_write(struct urtwn_softc *sc, int chain, uint8_t addr,
|
|
uint32_t val)
|
|
{
|
|
urtwn_bb_write(sc, R92C_LSSI_PARAM(chain),
|
|
SM(R88E_LSSI_PARAM_ADDR, addr) |
|
|
SM(R92C_LSSI_PARAM_DATA, val));
|
|
}
|
|
|
|
static uint32_t
|
|
urtwn_rf_read(struct urtwn_softc *sc, int chain, uint8_t addr)
|
|
{
|
|
uint32_t reg[R92C_MAX_CHAINS], val;
|
|
|
|
reg[0] = urtwn_bb_read(sc, R92C_HSSI_PARAM2(0));
|
|
if (chain != 0)
|
|
reg[chain] = urtwn_bb_read(sc, R92C_HSSI_PARAM2(chain));
|
|
|
|
urtwn_bb_write(sc, R92C_HSSI_PARAM2(0),
|
|
reg[0] & ~R92C_HSSI_PARAM2_READ_EDGE);
|
|
urtwn_ms_delay(sc);
|
|
|
|
urtwn_bb_write(sc, R92C_HSSI_PARAM2(chain),
|
|
RW(reg[chain], R92C_HSSI_PARAM2_READ_ADDR, addr) |
|
|
R92C_HSSI_PARAM2_READ_EDGE);
|
|
urtwn_ms_delay(sc);
|
|
|
|
urtwn_bb_write(sc, R92C_HSSI_PARAM2(0),
|
|
reg[0] | R92C_HSSI_PARAM2_READ_EDGE);
|
|
urtwn_ms_delay(sc);
|
|
|
|
if (urtwn_bb_read(sc, R92C_HSSI_PARAM1(chain)) & R92C_HSSI_PARAM1_PI)
|
|
val = urtwn_bb_read(sc, R92C_HSPI_READBACK(chain));
|
|
else
|
|
val = urtwn_bb_read(sc, R92C_LSSI_READBACK(chain));
|
|
return (MS(val, R92C_LSSI_READBACK_DATA));
|
|
}
|
|
|
|
static int
|
|
urtwn_llt_write(struct urtwn_softc *sc, uint32_t addr, uint32_t data)
|
|
{
|
|
int ntries;
|
|
|
|
urtwn_write_4(sc, R92C_LLT_INIT,
|
|
SM(R92C_LLT_INIT_OP, R92C_LLT_INIT_OP_WRITE) |
|
|
SM(R92C_LLT_INIT_ADDR, addr) |
|
|
SM(R92C_LLT_INIT_DATA, data));
|
|
/* Wait for write operation to complete. */
|
|
for (ntries = 0; ntries < 20; ntries++) {
|
|
if (MS(urtwn_read_4(sc, R92C_LLT_INIT), R92C_LLT_INIT_OP) ==
|
|
R92C_LLT_INIT_OP_NO_ACTIVE)
|
|
return (0);
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
return (ETIMEDOUT);
|
|
}
|
|
|
|
static uint8_t
|
|
urtwn_efuse_read_1(struct urtwn_softc *sc, uint16_t addr)
|
|
{
|
|
uint32_t reg;
|
|
int ntries;
|
|
|
|
reg = urtwn_read_4(sc, R92C_EFUSE_CTRL);
|
|
reg = RW(reg, R92C_EFUSE_CTRL_ADDR, addr);
|
|
reg &= ~R92C_EFUSE_CTRL_VALID;
|
|
urtwn_write_4(sc, R92C_EFUSE_CTRL, reg);
|
|
/* Wait for read operation to complete. */
|
|
for (ntries = 0; ntries < 100; ntries++) {
|
|
reg = urtwn_read_4(sc, R92C_EFUSE_CTRL);
|
|
if (reg & R92C_EFUSE_CTRL_VALID)
|
|
return (MS(reg, R92C_EFUSE_CTRL_DATA));
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
device_printf(sc->sc_dev,
|
|
"could not read efuse byte at address 0x%x\n", addr);
|
|
return (0xff);
|
|
}
|
|
|
|
static void
|
|
urtwn_efuse_read(struct urtwn_softc *sc)
|
|
{
|
|
uint8_t *rom = (uint8_t *)&sc->rom;
|
|
uint16_t addr = 0;
|
|
uint32_t reg;
|
|
uint8_t off, msk;
|
|
int i;
|
|
|
|
urtwn_efuse_switch_power(sc);
|
|
|
|
memset(&sc->rom, 0xff, sizeof(sc->rom));
|
|
while (addr < 512) {
|
|
reg = urtwn_efuse_read_1(sc, addr);
|
|
if (reg == 0xff)
|
|
break;
|
|
addr++;
|
|
off = reg >> 4;
|
|
msk = reg & 0xf;
|
|
for (i = 0; i < 4; i++) {
|
|
if (msk & (1 << i))
|
|
continue;
|
|
rom[off * 8 + i * 2 + 0] =
|
|
urtwn_efuse_read_1(sc, addr);
|
|
addr++;
|
|
rom[off * 8 + i * 2 + 1] =
|
|
urtwn_efuse_read_1(sc, addr);
|
|
addr++;
|
|
}
|
|
}
|
|
#ifdef URTWN_DEBUG
|
|
if (urtwn_debug >= 2) {
|
|
/* Dump ROM content. */
|
|
printf("\n");
|
|
for (i = 0; i < sizeof(sc->rom); i++)
|
|
printf("%02x:", rom[i]);
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
urtwn_write_1(sc, R92C_EFUSE_ACCESS, R92C_EFUSE_ACCESS_OFF);
|
|
}
|
|
|
|
static void
|
|
urtwn_efuse_switch_power(struct urtwn_softc *sc)
|
|
{
|
|
uint32_t reg;
|
|
|
|
urtwn_write_1(sc, R92C_EFUSE_ACCESS, R92C_EFUSE_ACCESS_ON);
|
|
|
|
reg = urtwn_read_2(sc, R92C_SYS_ISO_CTRL);
|
|
if (!(reg & R92C_SYS_ISO_CTRL_PWC_EV12V)) {
|
|
urtwn_write_2(sc, R92C_SYS_ISO_CTRL,
|
|
reg | R92C_SYS_ISO_CTRL_PWC_EV12V);
|
|
}
|
|
reg = urtwn_read_2(sc, R92C_SYS_FUNC_EN);
|
|
if (!(reg & R92C_SYS_FUNC_EN_ELDR)) {
|
|
urtwn_write_2(sc, R92C_SYS_FUNC_EN,
|
|
reg | R92C_SYS_FUNC_EN_ELDR);
|
|
}
|
|
reg = urtwn_read_2(sc, R92C_SYS_CLKR);
|
|
if ((reg & (R92C_SYS_CLKR_LOADER_EN | R92C_SYS_CLKR_ANA8M)) !=
|
|
(R92C_SYS_CLKR_LOADER_EN | R92C_SYS_CLKR_ANA8M)) {
|
|
urtwn_write_2(sc, R92C_SYS_CLKR,
|
|
reg | R92C_SYS_CLKR_LOADER_EN | R92C_SYS_CLKR_ANA8M);
|
|
}
|
|
}
|
|
|
|
static int
|
|
urtwn_read_chipid(struct urtwn_softc *sc)
|
|
{
|
|
uint32_t reg;
|
|
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
return (0);
|
|
|
|
reg = urtwn_read_4(sc, R92C_SYS_CFG);
|
|
if (reg & R92C_SYS_CFG_TRP_VAUX_EN)
|
|
return (EIO);
|
|
|
|
if (reg & R92C_SYS_CFG_TYPE_92C) {
|
|
sc->chip |= URTWN_CHIP_92C;
|
|
/* Check if it is a castrated 8192C. */
|
|
if (MS(urtwn_read_4(sc, R92C_HPON_FSM),
|
|
R92C_HPON_FSM_CHIP_BONDING_ID) ==
|
|
R92C_HPON_FSM_CHIP_BONDING_ID_92C_1T2R)
|
|
sc->chip |= URTWN_CHIP_92C_1T2R;
|
|
}
|
|
if (reg & R92C_SYS_CFG_VENDOR_UMC) {
|
|
sc->chip |= URTWN_CHIP_UMC;
|
|
if (MS(reg, R92C_SYS_CFG_CHIP_VER_RTL) == 0)
|
|
sc->chip |= URTWN_CHIP_UMC_A_CUT;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
urtwn_read_rom(struct urtwn_softc *sc)
|
|
{
|
|
struct r92c_rom *rom = &sc->rom;
|
|
|
|
/* Read full ROM image. */
|
|
urtwn_efuse_read(sc);
|
|
|
|
/* XXX Weird but this is what the vendor driver does. */
|
|
sc->pa_setting = urtwn_efuse_read_1(sc, 0x1fa);
|
|
DPRINTF("PA setting=0x%x\n", sc->pa_setting);
|
|
|
|
sc->board_type = MS(rom->rf_opt1, R92C_ROM_RF1_BOARD_TYPE);
|
|
|
|
sc->regulatory = MS(rom->rf_opt1, R92C_ROM_RF1_REGULATORY);
|
|
DPRINTF("regulatory type=%d\n", sc->regulatory);
|
|
IEEE80211_ADDR_COPY(sc->sc_ic.ic_macaddr, rom->macaddr);
|
|
|
|
sc->sc_rf_write = urtwn_r92c_rf_write;
|
|
sc->sc_power_on = urtwn_r92c_power_on;
|
|
sc->sc_dma_init = urtwn_r92c_dma_init;
|
|
}
|
|
|
|
static void
|
|
urtwn_r88e_read_rom(struct urtwn_softc *sc)
|
|
{
|
|
uint8_t *rom = sc->r88e_rom;
|
|
uint16_t addr = 0;
|
|
uint32_t reg;
|
|
uint8_t off, msk, tmp;
|
|
int i;
|
|
|
|
off = 0;
|
|
urtwn_efuse_switch_power(sc);
|
|
|
|
/* Read full ROM image. */
|
|
memset(&sc->r88e_rom, 0xff, sizeof(sc->r88e_rom));
|
|
while (addr < 512) {
|
|
reg = urtwn_efuse_read_1(sc, addr);
|
|
if (reg == 0xff)
|
|
break;
|
|
addr++;
|
|
if ((reg & 0x1f) == 0x0f) {
|
|
tmp = (reg & 0xe0) >> 5;
|
|
reg = urtwn_efuse_read_1(sc, addr);
|
|
if ((reg & 0x0f) != 0x0f)
|
|
off = ((reg & 0xf0) >> 1) | tmp;
|
|
addr++;
|
|
} else
|
|
off = reg >> 4;
|
|
msk = reg & 0xf;
|
|
for (i = 0; i < 4; i++) {
|
|
if (msk & (1 << i))
|
|
continue;
|
|
rom[off * 8 + i * 2 + 0] =
|
|
urtwn_efuse_read_1(sc, addr);
|
|
addr++;
|
|
rom[off * 8 + i * 2 + 1] =
|
|
urtwn_efuse_read_1(sc, addr);
|
|
addr++;
|
|
}
|
|
}
|
|
|
|
urtwn_write_1(sc, R92C_EFUSE_ACCESS, R92C_EFUSE_ACCESS_OFF);
|
|
|
|
addr = 0x10;
|
|
for (i = 0; i < 6; i++)
|
|
sc->cck_tx_pwr[i] = sc->r88e_rom[addr++];
|
|
for (i = 0; i < 5; i++)
|
|
sc->ht40_tx_pwr[i] = sc->r88e_rom[addr++];
|
|
sc->bw20_tx_pwr_diff = (sc->r88e_rom[addr] & 0xf0) >> 4;
|
|
if (sc->bw20_tx_pwr_diff & 0x08)
|
|
sc->bw20_tx_pwr_diff |= 0xf0;
|
|
sc->ofdm_tx_pwr_diff = (sc->r88e_rom[addr] & 0xf);
|
|
if (sc->ofdm_tx_pwr_diff & 0x08)
|
|
sc->ofdm_tx_pwr_diff |= 0xf0;
|
|
sc->regulatory = MS(sc->r88e_rom[0xc1], R92C_ROM_RF1_REGULATORY);
|
|
IEEE80211_ADDR_COPY(sc->sc_ic.ic_macaddr, &sc->r88e_rom[0xd7]);
|
|
|
|
sc->sc_rf_write = urtwn_r88e_rf_write;
|
|
sc->sc_power_on = urtwn_r88e_power_on;
|
|
sc->sc_dma_init = urtwn_r88e_dma_init;
|
|
}
|
|
|
|
/*
|
|
* Initialize rate adaptation in firmware.
|
|
*/
|
|
static int
|
|
urtwn_ra_init(struct urtwn_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
|
|
struct ieee80211_node *ni;
|
|
struct ieee80211_rateset *rs;
|
|
struct r92c_fw_cmd_macid_cfg cmd;
|
|
uint32_t rates, basicrates;
|
|
uint8_t mode;
|
|
int maxrate, maxbasicrate, error, i, j;
|
|
|
|
ni = ieee80211_ref_node(vap->iv_bss);
|
|
rs = &ni->ni_rates;
|
|
|
|
/* Get normal and basic rates mask. */
|
|
rates = basicrates = 0;
|
|
maxrate = maxbasicrate = 0;
|
|
for (i = 0; i < rs->rs_nrates; i++) {
|
|
/* Convert 802.11 rate to HW rate index. */
|
|
for (j = 0; j < nitems(ridx2rate); j++)
|
|
if ((rs->rs_rates[i] & IEEE80211_RATE_VAL) ==
|
|
ridx2rate[j])
|
|
break;
|
|
if (j == nitems(ridx2rate)) /* Unknown rate, skip. */
|
|
continue;
|
|
rates |= 1 << j;
|
|
if (j > maxrate)
|
|
maxrate = j;
|
|
if (rs->rs_rates[i] & IEEE80211_RATE_BASIC) {
|
|
basicrates |= 1 << j;
|
|
if (j > maxbasicrate)
|
|
maxbasicrate = j;
|
|
}
|
|
}
|
|
if (ic->ic_curmode == IEEE80211_MODE_11B)
|
|
mode = R92C_RAID_11B;
|
|
else
|
|
mode = R92C_RAID_11BG;
|
|
DPRINTF("mode=0x%x rates=0x%08x, basicrates=0x%08x\n",
|
|
mode, rates, basicrates);
|
|
|
|
/* Set rates mask for group addressed frames. */
|
|
cmd.macid = URTWN_MACID_BC | URTWN_MACID_VALID;
|
|
cmd.mask = htole32(mode << 28 | basicrates);
|
|
error = urtwn_fw_cmd(sc, R92C_CMD_MACID_CONFIG, &cmd, sizeof(cmd));
|
|
if (error != 0) {
|
|
ieee80211_free_node(ni);
|
|
device_printf(sc->sc_dev,
|
|
"could not add broadcast station\n");
|
|
return (error);
|
|
}
|
|
/* Set initial MRR rate. */
|
|
DPRINTF("maxbasicrate=%d\n", maxbasicrate);
|
|
urtwn_write_1(sc, R92C_INIDATA_RATE_SEL(URTWN_MACID_BC),
|
|
maxbasicrate);
|
|
|
|
/* Set rates mask for unicast frames. */
|
|
cmd.macid = URTWN_MACID_BSS | URTWN_MACID_VALID;
|
|
cmd.mask = htole32(mode << 28 | rates);
|
|
error = urtwn_fw_cmd(sc, R92C_CMD_MACID_CONFIG, &cmd, sizeof(cmd));
|
|
if (error != 0) {
|
|
ieee80211_free_node(ni);
|
|
device_printf(sc->sc_dev, "could not add BSS station\n");
|
|
return (error);
|
|
}
|
|
/* Set initial MRR rate. */
|
|
DPRINTF("maxrate=%d\n", maxrate);
|
|
urtwn_write_1(sc, R92C_INIDATA_RATE_SEL(URTWN_MACID_BSS),
|
|
maxrate);
|
|
|
|
/* Indicate highest supported rate. */
|
|
ni->ni_txrate = rs->rs_rates[rs->rs_nrates - 1];
|
|
ieee80211_free_node(ni);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
urtwn_init_beacon(struct urtwn_softc *sc, struct urtwn_vap *uvp)
|
|
{
|
|
struct r92c_tx_desc *txd = &uvp->bcn_desc;
|
|
|
|
txd->txdw0 = htole32(
|
|
SM(R92C_TXDW0_OFFSET, sizeof(*txd)) | R92C_TXDW0_BMCAST |
|
|
R92C_TXDW0_OWN | R92C_TXDW0_FSG | R92C_TXDW0_LSG);
|
|
txd->txdw1 = htole32(
|
|
SM(R92C_TXDW1_QSEL, R92C_TXDW1_QSEL_BEACON) |
|
|
SM(R92C_TXDW1_RAID, R92C_RAID_11B));
|
|
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
txd->txdw1 |= htole32(SM(R88E_TXDW1_MACID, URTWN_MACID_BC));
|
|
else
|
|
txd->txdw1 |= htole32(SM(R92C_TXDW1_MACID, URTWN_MACID_BC));
|
|
|
|
txd->txdw4 = htole32(R92C_TXDW4_DRVRATE);
|
|
txd->txdw5 = htole32(SM(R92C_TXDW5_DATARATE, URTWN_RIDX_CCK1));
|
|
txd->txdseq = htole16(R92C_TXDSEQ_HWSEQ_EN);
|
|
}
|
|
|
|
static int
|
|
urtwn_setup_beacon(struct urtwn_softc *sc, struct ieee80211_node *ni)
|
|
{
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
struct urtwn_vap *uvp = URTWN_VAP(vap);
|
|
struct mbuf *m;
|
|
int error;
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
|
|
if (ni->ni_chan == IEEE80211_CHAN_ANYC)
|
|
return (EINVAL);
|
|
|
|
m = ieee80211_beacon_alloc(ni);
|
|
if (m == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"%s: could not allocate beacon frame\n", __func__);
|
|
return (ENOMEM);
|
|
}
|
|
|
|
if (uvp->bcn_mbuf != NULL)
|
|
m_freem(uvp->bcn_mbuf);
|
|
|
|
uvp->bcn_mbuf = m;
|
|
|
|
if ((error = urtwn_tx_beacon(sc, uvp)) != 0)
|
|
return (error);
|
|
|
|
/* XXX bcnq stuck workaround */
|
|
if ((error = urtwn_tx_beacon(sc, uvp)) != 0)
|
|
return (error);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
urtwn_update_beacon(struct ieee80211vap *vap, int item)
|
|
{
|
|
struct urtwn_softc *sc = vap->iv_ic->ic_softc;
|
|
struct urtwn_vap *uvp = URTWN_VAP(vap);
|
|
struct ieee80211_beacon_offsets *bo = &vap->iv_bcn_off;
|
|
struct ieee80211_node *ni = vap->iv_bss;
|
|
int mcast = 0;
|
|
|
|
URTWN_LOCK(sc);
|
|
if (uvp->bcn_mbuf == NULL) {
|
|
uvp->bcn_mbuf = ieee80211_beacon_alloc(ni);
|
|
if (uvp->bcn_mbuf == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"%s: could not allocate beacon frame\n", __func__);
|
|
URTWN_UNLOCK(sc);
|
|
return;
|
|
}
|
|
}
|
|
URTWN_UNLOCK(sc);
|
|
|
|
if (item == IEEE80211_BEACON_TIM)
|
|
mcast = 1; /* XXX */
|
|
|
|
setbit(bo->bo_flags, item);
|
|
ieee80211_beacon_update(ni, uvp->bcn_mbuf, mcast);
|
|
|
|
URTWN_LOCK(sc);
|
|
urtwn_tx_beacon(sc, uvp);
|
|
URTWN_UNLOCK(sc);
|
|
}
|
|
|
|
/*
|
|
* Push a beacon frame into the chip. Beacon will
|
|
* be repeated by the chip every R92C_BCN_INTERVAL.
|
|
*/
|
|
static int
|
|
urtwn_tx_beacon(struct urtwn_softc *sc, struct urtwn_vap *uvp)
|
|
{
|
|
struct r92c_tx_desc *desc = &uvp->bcn_desc;
|
|
struct urtwn_data *bf;
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
|
|
bf = urtwn_getbuf(sc);
|
|
if (bf == NULL)
|
|
return (ENOMEM);
|
|
|
|
memcpy(bf->buf, desc, sizeof(*desc));
|
|
urtwn_tx_start(sc, uvp->bcn_mbuf, IEEE80211_FC0_TYPE_MGT, bf);
|
|
|
|
sc->sc_txtimer = 5;
|
|
callout_reset(&sc->sc_watchdog_ch, hz, urtwn_watchdog, sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
urtwn_tsf_task_adhoc(void *arg, int pending)
|
|
{
|
|
struct ieee80211vap *vap = arg;
|
|
struct urtwn_softc *sc = vap->iv_ic->ic_softc;
|
|
struct ieee80211_node *ni;
|
|
uint32_t reg;
|
|
|
|
URTWN_LOCK(sc);
|
|
ni = ieee80211_ref_node(vap->iv_bss);
|
|
reg = urtwn_read_1(sc, R92C_BCN_CTRL);
|
|
|
|
/* Accept beacons with the same BSSID. */
|
|
urtwn_set_rx_bssid_all(sc, 0);
|
|
|
|
/* Enable synchronization. */
|
|
reg &= ~R92C_BCN_CTRL_DIS_TSF_UDT0;
|
|
urtwn_write_1(sc, R92C_BCN_CTRL, reg);
|
|
|
|
/* Synchronize. */
|
|
usb_pause_mtx(&sc->sc_mtx, hz * ni->ni_intval * 5 / 1000);
|
|
|
|
/* Disable synchronization. */
|
|
reg |= R92C_BCN_CTRL_DIS_TSF_UDT0;
|
|
urtwn_write_1(sc, R92C_BCN_CTRL, reg);
|
|
|
|
/* Remove beacon filter. */
|
|
urtwn_set_rx_bssid_all(sc, 1);
|
|
|
|
/* Enable beaconing. */
|
|
urtwn_write_1(sc, R92C_MBID_NUM,
|
|
urtwn_read_1(sc, R92C_MBID_NUM) | R92C_MBID_TXBCN_RPT0);
|
|
reg |= R92C_BCN_CTRL_EN_BCN;
|
|
|
|
urtwn_write_1(sc, R92C_BCN_CTRL, reg);
|
|
ieee80211_free_node(ni);
|
|
URTWN_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
urtwn_tsf_sync_enable(struct urtwn_softc *sc, struct ieee80211vap *vap)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct urtwn_vap *uvp = URTWN_VAP(vap);
|
|
|
|
/* Reset TSF. */
|
|
urtwn_write_1(sc, R92C_DUAL_TSF_RST, R92C_DUAL_TSF_RST0);
|
|
|
|
switch (vap->iv_opmode) {
|
|
case IEEE80211_M_STA:
|
|
/* Enable TSF synchronization. */
|
|
urtwn_write_1(sc, R92C_BCN_CTRL,
|
|
urtwn_read_1(sc, R92C_BCN_CTRL) &
|
|
~R92C_BCN_CTRL_DIS_TSF_UDT0);
|
|
break;
|
|
case IEEE80211_M_IBSS:
|
|
ieee80211_runtask(ic, &uvp->tsf_task_adhoc);
|
|
break;
|
|
case IEEE80211_M_HOSTAP:
|
|
/* Enable beaconing. */
|
|
urtwn_write_1(sc, R92C_MBID_NUM,
|
|
urtwn_read_1(sc, R92C_MBID_NUM) | R92C_MBID_TXBCN_RPT0);
|
|
urtwn_write_1(sc, R92C_BCN_CTRL,
|
|
urtwn_read_1(sc, R92C_BCN_CTRL) | R92C_BCN_CTRL_EN_BCN);
|
|
break;
|
|
default:
|
|
device_printf(sc->sc_dev, "undefined opmode %d\n",
|
|
vap->iv_opmode);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_set_led(struct urtwn_softc *sc, int led, int on)
|
|
{
|
|
uint8_t reg;
|
|
|
|
if (led == URTWN_LED_LINK) {
|
|
if (sc->chip & URTWN_CHIP_88E) {
|
|
reg = urtwn_read_1(sc, R92C_LEDCFG2) & 0xf0;
|
|
urtwn_write_1(sc, R92C_LEDCFG2, reg | 0x60);
|
|
if (!on) {
|
|
reg = urtwn_read_1(sc, R92C_LEDCFG2) & 0x90;
|
|
urtwn_write_1(sc, R92C_LEDCFG2,
|
|
reg | R92C_LEDCFG0_DIS);
|
|
urtwn_write_1(sc, R92C_MAC_PINMUX_CFG,
|
|
urtwn_read_1(sc, R92C_MAC_PINMUX_CFG) &
|
|
0xfe);
|
|
}
|
|
} else {
|
|
reg = urtwn_read_1(sc, R92C_LEDCFG0) & 0x70;
|
|
if (!on)
|
|
reg |= R92C_LEDCFG0_DIS;
|
|
urtwn_write_1(sc, R92C_LEDCFG0, reg);
|
|
}
|
|
sc->ledlink = on; /* Save LED state. */
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_set_mode(struct urtwn_softc *sc, uint8_t mode)
|
|
{
|
|
uint8_t reg;
|
|
|
|
reg = urtwn_read_1(sc, R92C_MSR);
|
|
reg = (reg & ~R92C_MSR_MASK) | mode;
|
|
urtwn_write_1(sc, R92C_MSR, reg);
|
|
}
|
|
|
|
static void
|
|
urtwn_ibss_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m, int subtype,
|
|
const struct ieee80211_rx_stats *rxs,
|
|
int rssi, int nf)
|
|
{
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
struct urtwn_softc *sc = vap->iv_ic->ic_softc;
|
|
struct urtwn_vap *uvp = URTWN_VAP(vap);
|
|
uint64_t ni_tstamp, curr_tstamp;
|
|
|
|
uvp->recv_mgmt(ni, m, subtype, rxs, rssi, nf);
|
|
|
|
if (vap->iv_state == IEEE80211_S_RUN &&
|
|
(subtype == IEEE80211_FC0_SUBTYPE_BEACON ||
|
|
subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP)) {
|
|
ni_tstamp = le64toh(ni->ni_tstamp.tsf);
|
|
#ifdef D3831
|
|
URTWN_LOCK(sc);
|
|
urtwn_get_tsf(sc, &curr_tstamp);
|
|
URTWN_UNLOCK(sc);
|
|
curr_tstamp = le64toh(curr_tstamp);
|
|
|
|
if (ni_tstamp >= curr_tstamp)
|
|
(void) ieee80211_ibss_merge(ni);
|
|
#else
|
|
(void) sc;
|
|
(void) curr_tstamp;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
static int
|
|
urtwn_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
|
|
{
|
|
struct urtwn_vap *uvp = URTWN_VAP(vap);
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
struct urtwn_softc *sc = ic->ic_softc;
|
|
struct ieee80211_node *ni;
|
|
enum ieee80211_state ostate;
|
|
uint32_t reg;
|
|
uint8_t mode;
|
|
int error = 0;
|
|
|
|
ostate = vap->iv_state;
|
|
DPRINTF("%s -> %s\n", ieee80211_state_name[ostate],
|
|
ieee80211_state_name[nstate]);
|
|
|
|
IEEE80211_UNLOCK(ic);
|
|
URTWN_LOCK(sc);
|
|
callout_stop(&sc->sc_watchdog_ch);
|
|
|
|
if (ostate == IEEE80211_S_RUN) {
|
|
/* Turn link LED off. */
|
|
urtwn_set_led(sc, URTWN_LED_LINK, 0);
|
|
|
|
/* Set media status to 'No Link'. */
|
|
urtwn_set_mode(sc, R92C_MSR_NOLINK);
|
|
|
|
/* Stop Rx of data frames. */
|
|
urtwn_write_2(sc, R92C_RXFLTMAP2, 0);
|
|
|
|
/* Disable TSF synchronization. */
|
|
urtwn_write_1(sc, R92C_BCN_CTRL,
|
|
(urtwn_read_1(sc, R92C_BCN_CTRL) & ~R92C_BCN_CTRL_EN_BCN) |
|
|
R92C_BCN_CTRL_DIS_TSF_UDT0);
|
|
|
|
/* Disable beaconing. */
|
|
urtwn_write_1(sc, R92C_MBID_NUM,
|
|
urtwn_read_1(sc, R92C_MBID_NUM) & ~R92C_MBID_TXBCN_RPT0);
|
|
|
|
/* Reset TSF. */
|
|
urtwn_write_1(sc, R92C_DUAL_TSF_RST, R92C_DUAL_TSF_RST0);
|
|
|
|
/* Reset EDCA parameters. */
|
|
urtwn_write_4(sc, R92C_EDCA_VO_PARAM, 0x002f3217);
|
|
urtwn_write_4(sc, R92C_EDCA_VI_PARAM, 0x005e4317);
|
|
urtwn_write_4(sc, R92C_EDCA_BE_PARAM, 0x00105320);
|
|
urtwn_write_4(sc, R92C_EDCA_BK_PARAM, 0x0000a444);
|
|
}
|
|
|
|
switch (nstate) {
|
|
case IEEE80211_S_INIT:
|
|
/* Turn link LED off. */
|
|
urtwn_set_led(sc, URTWN_LED_LINK, 0);
|
|
break;
|
|
case IEEE80211_S_SCAN:
|
|
/* Pause AC Tx queues. */
|
|
urtwn_write_1(sc, R92C_TXPAUSE,
|
|
urtwn_read_1(sc, R92C_TXPAUSE) | 0x0f);
|
|
break;
|
|
case IEEE80211_S_AUTH:
|
|
urtwn_set_chan(sc, ic->ic_curchan, NULL);
|
|
break;
|
|
case IEEE80211_S_RUN:
|
|
if (vap->iv_opmode == IEEE80211_M_MONITOR) {
|
|
/* Turn link LED on. */
|
|
urtwn_set_led(sc, URTWN_LED_LINK, 1);
|
|
break;
|
|
}
|
|
|
|
ni = ieee80211_ref_node(vap->iv_bss);
|
|
|
|
if (ic->ic_bsschan == IEEE80211_CHAN_ANYC ||
|
|
ni->ni_chan == IEEE80211_CHAN_ANYC) {
|
|
device_printf(sc->sc_dev,
|
|
"%s: could not move to RUN state\n", __func__);
|
|
error = EINVAL;
|
|
goto end_run;
|
|
}
|
|
|
|
switch (vap->iv_opmode) {
|
|
case IEEE80211_M_STA:
|
|
mode = R92C_MSR_INFRA;
|
|
break;
|
|
case IEEE80211_M_IBSS:
|
|
mode = R92C_MSR_ADHOC;
|
|
break;
|
|
case IEEE80211_M_HOSTAP:
|
|
mode = R92C_MSR_AP;
|
|
break;
|
|
default:
|
|
device_printf(sc->sc_dev, "undefined opmode %d\n",
|
|
vap->iv_opmode);
|
|
error = EINVAL;
|
|
goto end_run;
|
|
}
|
|
|
|
/* Set media status to 'Associated'. */
|
|
urtwn_set_mode(sc, mode);
|
|
|
|
/* Set BSSID. */
|
|
urtwn_write_4(sc, R92C_BSSID + 0, LE_READ_4(&ni->ni_bssid[0]));
|
|
urtwn_write_4(sc, R92C_BSSID + 4, LE_READ_2(&ni->ni_bssid[4]));
|
|
|
|
if (ic->ic_curmode == IEEE80211_MODE_11B)
|
|
urtwn_write_1(sc, R92C_INIRTS_RATE_SEL, 0);
|
|
else /* 802.11b/g */
|
|
urtwn_write_1(sc, R92C_INIRTS_RATE_SEL, 3);
|
|
|
|
/* Enable Rx of data frames. */
|
|
urtwn_write_2(sc, R92C_RXFLTMAP2, 0xffff);
|
|
|
|
/* Flush all AC queues. */
|
|
urtwn_write_1(sc, R92C_TXPAUSE, 0);
|
|
|
|
/* Set beacon interval. */
|
|
urtwn_write_2(sc, R92C_BCN_INTERVAL, ni->ni_intval);
|
|
|
|
/* Allow Rx from our BSSID only. */
|
|
if (ic->ic_promisc == 0) {
|
|
reg = urtwn_read_4(sc, R92C_RCR);
|
|
|
|
if (vap->iv_opmode != IEEE80211_M_HOSTAP)
|
|
reg |= R92C_RCR_CBSSID_DATA;
|
|
if (vap->iv_opmode != IEEE80211_M_IBSS)
|
|
reg |= R92C_RCR_CBSSID_BCN;
|
|
|
|
urtwn_write_4(sc, R92C_RCR, reg);
|
|
}
|
|
|
|
if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
|
|
vap->iv_opmode == IEEE80211_M_IBSS) {
|
|
error = urtwn_setup_beacon(sc, ni);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"unable to push beacon into the chip, "
|
|
"error %d\n", error);
|
|
goto end_run;
|
|
}
|
|
}
|
|
|
|
/* Enable TSF synchronization. */
|
|
urtwn_tsf_sync_enable(sc, vap);
|
|
|
|
urtwn_write_1(sc, R92C_SIFS_CCK + 1, 10);
|
|
urtwn_write_1(sc, R92C_SIFS_OFDM + 1, 10);
|
|
urtwn_write_1(sc, R92C_SPEC_SIFS + 1, 10);
|
|
urtwn_write_1(sc, R92C_MAC_SPEC_SIFS + 1, 10);
|
|
urtwn_write_1(sc, R92C_R2T_SIFS + 1, 10);
|
|
urtwn_write_1(sc, R92C_T2T_SIFS + 1, 10);
|
|
|
|
/* Intialize rate adaptation. */
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
ni->ni_txrate =
|
|
ni->ni_rates.rs_rates[ni->ni_rates.rs_nrates-1];
|
|
else
|
|
urtwn_ra_init(sc);
|
|
/* Turn link LED on. */
|
|
urtwn_set_led(sc, URTWN_LED_LINK, 1);
|
|
|
|
sc->avg_pwdb = -1; /* Reset average RSSI. */
|
|
/* Reset temperature calibration state machine. */
|
|
sc->thcal_state = 0;
|
|
sc->thcal_lctemp = 0;
|
|
|
|
end_run:
|
|
ieee80211_free_node(ni);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
URTWN_UNLOCK(sc);
|
|
IEEE80211_LOCK(ic);
|
|
return (error != 0 ? error : uvp->newstate(vap, nstate, arg));
|
|
}
|
|
|
|
static void
|
|
urtwn_watchdog(void *arg)
|
|
{
|
|
struct urtwn_softc *sc = arg;
|
|
|
|
if (sc->sc_txtimer > 0) {
|
|
if (--sc->sc_txtimer == 0) {
|
|
device_printf(sc->sc_dev, "device timeout\n");
|
|
counter_u64_add(sc->sc_ic.ic_oerrors, 1);
|
|
return;
|
|
}
|
|
callout_reset(&sc->sc_watchdog_ch, hz, urtwn_watchdog, sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_update_avgrssi(struct urtwn_softc *sc, int rate, int8_t rssi)
|
|
{
|
|
int pwdb;
|
|
|
|
/* Convert antenna signal to percentage. */
|
|
if (rssi <= -100 || rssi >= 20)
|
|
pwdb = 0;
|
|
else if (rssi >= 0)
|
|
pwdb = 100;
|
|
else
|
|
pwdb = 100 + rssi;
|
|
if (!(sc->chip & URTWN_CHIP_88E)) {
|
|
if (rate <= URTWN_RIDX_CCK11) {
|
|
/* CCK gain is smaller than OFDM/MCS gain. */
|
|
pwdb += 6;
|
|
if (pwdb > 100)
|
|
pwdb = 100;
|
|
if (pwdb <= 14)
|
|
pwdb -= 4;
|
|
else if (pwdb <= 26)
|
|
pwdb -= 8;
|
|
else if (pwdb <= 34)
|
|
pwdb -= 6;
|
|
else if (pwdb <= 42)
|
|
pwdb -= 2;
|
|
}
|
|
}
|
|
if (sc->avg_pwdb == -1) /* Init. */
|
|
sc->avg_pwdb = pwdb;
|
|
else if (sc->avg_pwdb < pwdb)
|
|
sc->avg_pwdb = ((sc->avg_pwdb * 19 + pwdb) / 20) + 1;
|
|
else
|
|
sc->avg_pwdb = ((sc->avg_pwdb * 19 + pwdb) / 20);
|
|
DPRINTFN(4, "PWDB=%d EMA=%d\n", pwdb, sc->avg_pwdb);
|
|
}
|
|
|
|
static int8_t
|
|
urtwn_get_rssi(struct urtwn_softc *sc, int rate, void *physt)
|
|
{
|
|
static const int8_t cckoff[] = { 16, -12, -26, -46 };
|
|
struct r92c_rx_phystat *phy;
|
|
struct r92c_rx_cck *cck;
|
|
uint8_t rpt;
|
|
int8_t rssi;
|
|
|
|
if (rate <= URTWN_RIDX_CCK11) {
|
|
cck = (struct r92c_rx_cck *)physt;
|
|
if (sc->sc_flags & URTWN_FLAG_CCK_HIPWR) {
|
|
rpt = (cck->agc_rpt >> 5) & 0x3;
|
|
rssi = (cck->agc_rpt & 0x1f) << 1;
|
|
} else {
|
|
rpt = (cck->agc_rpt >> 6) & 0x3;
|
|
rssi = cck->agc_rpt & 0x3e;
|
|
}
|
|
rssi = cckoff[rpt] - rssi;
|
|
} else { /* OFDM/HT. */
|
|
phy = (struct r92c_rx_phystat *)physt;
|
|
rssi = ((le32toh(phy->phydw1) >> 1) & 0x7f) - 110;
|
|
}
|
|
return (rssi);
|
|
}
|
|
|
|
static int8_t
|
|
urtwn_r88e_get_rssi(struct urtwn_softc *sc, int rate, void *physt)
|
|
{
|
|
struct r92c_rx_phystat *phy;
|
|
struct r88e_rx_cck *cck;
|
|
uint8_t cck_agc_rpt, lna_idx, vga_idx;
|
|
int8_t rssi;
|
|
|
|
rssi = 0;
|
|
if (rate <= URTWN_RIDX_CCK11) {
|
|
cck = (struct r88e_rx_cck *)physt;
|
|
cck_agc_rpt = cck->agc_rpt;
|
|
lna_idx = (cck_agc_rpt & 0xe0) >> 5;
|
|
vga_idx = cck_agc_rpt & 0x1f;
|
|
switch (lna_idx) {
|
|
case 7:
|
|
if (vga_idx <= 27)
|
|
rssi = -100 + 2* (27 - vga_idx);
|
|
else
|
|
rssi = -100;
|
|
break;
|
|
case 6:
|
|
rssi = -48 + 2 * (2 - vga_idx);
|
|
break;
|
|
case 5:
|
|
rssi = -42 + 2 * (7 - vga_idx);
|
|
break;
|
|
case 4:
|
|
rssi = -36 + 2 * (7 - vga_idx);
|
|
break;
|
|
case 3:
|
|
rssi = -24 + 2 * (7 - vga_idx);
|
|
break;
|
|
case 2:
|
|
rssi = -12 + 2 * (5 - vga_idx);
|
|
break;
|
|
case 1:
|
|
rssi = 8 - (2 * vga_idx);
|
|
break;
|
|
case 0:
|
|
rssi = 14 - (2 * vga_idx);
|
|
break;
|
|
}
|
|
rssi += 6;
|
|
} else { /* OFDM/HT. */
|
|
phy = (struct r92c_rx_phystat *)physt;
|
|
rssi = ((le32toh(phy->phydw1) >> 1) & 0x7f) - 110;
|
|
}
|
|
return (rssi);
|
|
}
|
|
|
|
static int
|
|
urtwn_tx_data(struct urtwn_softc *sc, struct ieee80211_node *ni,
|
|
struct mbuf *m, struct urtwn_data *data)
|
|
{
|
|
struct ieee80211_frame *wh;
|
|
struct ieee80211_key *k = NULL;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
struct r92c_tx_desc *txd;
|
|
uint8_t macid, raid, ridx, subtype, type, qsel;
|
|
int ismcast;
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
|
|
/*
|
|
* Software crypto.
|
|
*/
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
|
|
subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK;
|
|
ismcast = IEEE80211_IS_MULTICAST(wh->i_addr1);
|
|
|
|
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
|
|
k = ieee80211_crypto_encap(ni, m);
|
|
if (k == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"ieee80211_crypto_encap returns NULL.\n");
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
/* in case packet header moved, reset pointer */
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
}
|
|
|
|
/* Fill Tx descriptor. */
|
|
txd = (struct r92c_tx_desc *)data->buf;
|
|
memset(txd, 0, sizeof(*txd));
|
|
|
|
txd->txdw0 |= htole32(
|
|
SM(R92C_TXDW0_OFFSET, sizeof(*txd)) |
|
|
R92C_TXDW0_OWN | R92C_TXDW0_FSG | R92C_TXDW0_LSG);
|
|
if (ismcast)
|
|
txd->txdw0 |= htole32(R92C_TXDW0_BMCAST);
|
|
|
|
raid = R92C_RAID_11B; /* by default */
|
|
ridx = URTWN_RIDX_CCK1;
|
|
if (!ismcast) {
|
|
macid = URTWN_MACID_BSS;
|
|
|
|
if (type == IEEE80211_FC0_TYPE_DATA) {
|
|
qsel = R92C_TXDW1_QSEL_BE;
|
|
|
|
if (!(m->m_flags & M_EAPOL)) {
|
|
if (ic->ic_curmode != IEEE80211_MODE_11B) {
|
|
raid = R92C_RAID_11BG;
|
|
ridx = URTWN_RIDX_OFDM54;
|
|
} else
|
|
ridx = URTWN_RIDX_CCK11;
|
|
}
|
|
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
txd->txdw2 |= htole32(R88E_TXDW2_AGGBK);
|
|
else
|
|
txd->txdw1 |= htole32(R92C_TXDW1_AGGBK);
|
|
|
|
if (ic->ic_flags & IEEE80211_F_USEPROT) {
|
|
switch (ic->ic_protmode) {
|
|
case IEEE80211_PROT_CTSONLY:
|
|
txd->txdw4 |= htole32(
|
|
R92C_TXDW4_CTS2SELF |
|
|
R92C_TXDW4_HWRTSEN);
|
|
break;
|
|
case IEEE80211_PROT_RTSCTS:
|
|
txd->txdw4 |= htole32(
|
|
R92C_TXDW4_RTSEN |
|
|
R92C_TXDW4_HWRTSEN);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
txd->txdw4 |= htole32(SM(R92C_TXDW4_RTSRATE,
|
|
URTWN_RIDX_OFDM24));
|
|
txd->txdw5 |= htole32(0x0001ff00);
|
|
} else /* IEEE80211_FC0_TYPE_MGT */
|
|
qsel = R92C_TXDW1_QSEL_MGNT;
|
|
} else {
|
|
macid = URTWN_MACID_BC;
|
|
qsel = R92C_TXDW1_QSEL_MGNT;
|
|
}
|
|
|
|
txd->txdw1 |= htole32(
|
|
SM(R92C_TXDW1_QSEL, qsel) |
|
|
SM(R92C_TXDW1_RAID, raid));
|
|
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
txd->txdw1 |= htole32(SM(R88E_TXDW1_MACID, macid));
|
|
else
|
|
txd->txdw1 |= htole32(SM(R92C_TXDW1_MACID, macid));
|
|
|
|
txd->txdw5 |= htole32(SM(R92C_TXDW5_DATARATE, ridx));
|
|
/* not sure here */
|
|
if (ridx <= URTWN_RIDX_CCK11)
|
|
txd->txdw4 |= htole32(R92C_TXDW4_DRVRATE);
|
|
|
|
if (!IEEE80211_QOS_HAS_SEQ(wh)) {
|
|
/* Use HW sequence numbering for non-QoS frames. */
|
|
txd->txdseq = htole16(R92C_TXDSEQ_HWSEQ_EN);
|
|
} else {
|
|
/* Set sequence number. */
|
|
txd->txdseq = htole16(M_SEQNO_GET(m) % IEEE80211_SEQ_RANGE);
|
|
}
|
|
|
|
if (ieee80211_radiotap_active_vap(vap)) {
|
|
struct urtwn_tx_radiotap_header *tap = &sc->sc_txtap;
|
|
|
|
tap->wt_flags = 0;
|
|
tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq);
|
|
tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags);
|
|
if (k != NULL)
|
|
tap->wt_flags |= IEEE80211_RADIOTAP_F_WEP;
|
|
ieee80211_radiotap_tx(vap, m);
|
|
}
|
|
|
|
data->ni = ni;
|
|
|
|
urtwn_tx_start(sc, m, type, data);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
urtwn_tx_start(struct urtwn_softc *sc, struct mbuf *m, uint8_t type,
|
|
struct urtwn_data *data)
|
|
{
|
|
struct usb_xfer *xfer;
|
|
struct r92c_tx_desc *txd;
|
|
uint16_t ac, sum;
|
|
int i, xferlen;
|
|
struct usb_xfer *urtwn_pipes[WME_NUM_AC] = {
|
|
sc->sc_xfer[URTWN_BULK_TX_BE],
|
|
sc->sc_xfer[URTWN_BULK_TX_BK],
|
|
sc->sc_xfer[URTWN_BULK_TX_VI],
|
|
sc->sc_xfer[URTWN_BULK_TX_VO]
|
|
};
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
|
|
ac = M_WME_GETAC(m);
|
|
|
|
switch (type) {
|
|
case IEEE80211_FC0_TYPE_CTL:
|
|
case IEEE80211_FC0_TYPE_MGT:
|
|
xfer = sc->sc_xfer[URTWN_BULK_TX_VO];
|
|
break;
|
|
default:
|
|
xfer = urtwn_pipes[ac];
|
|
break;
|
|
}
|
|
|
|
txd = (struct r92c_tx_desc *)data->buf;
|
|
txd->txdw0 |= htole32(SM(R92C_TXDW0_PKTLEN, m->m_pkthdr.len));
|
|
|
|
/* Compute Tx descriptor checksum. */
|
|
sum = 0;
|
|
for (i = 0; i < sizeof(*txd) / 2; i++)
|
|
sum ^= ((uint16_t *)txd)[i];
|
|
txd->txdsum = sum; /* NB: already little endian. */
|
|
|
|
xferlen = sizeof(*txd) + m->m_pkthdr.len;
|
|
m_copydata(m, 0, m->m_pkthdr.len, (caddr_t)&txd[1]);
|
|
|
|
data->buflen = xferlen;
|
|
data->m = m;
|
|
|
|
STAILQ_INSERT_TAIL(&sc->sc_tx_pending, data, next);
|
|
usbd_transfer_start(xfer);
|
|
}
|
|
|
|
static int
|
|
urtwn_transmit(struct ieee80211com *ic, struct mbuf *m)
|
|
{
|
|
struct urtwn_softc *sc = ic->ic_softc;
|
|
int error;
|
|
|
|
URTWN_LOCK(sc);
|
|
if ((sc->sc_flags & URTWN_RUNNING) == 0) {
|
|
URTWN_UNLOCK(sc);
|
|
return (ENXIO);
|
|
}
|
|
error = mbufq_enqueue(&sc->sc_snd, m);
|
|
if (error) {
|
|
URTWN_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
urtwn_start(sc);
|
|
URTWN_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
urtwn_start(struct urtwn_softc *sc)
|
|
{
|
|
struct ieee80211_node *ni;
|
|
struct mbuf *m;
|
|
struct urtwn_data *bf;
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) {
|
|
bf = urtwn_getbuf(sc);
|
|
if (bf == NULL) {
|
|
mbufq_prepend(&sc->sc_snd, m);
|
|
break;
|
|
}
|
|
ni = (struct ieee80211_node *)m->m_pkthdr.rcvif;
|
|
m->m_pkthdr.rcvif = NULL;
|
|
if (urtwn_tx_data(sc, ni, m, bf) != 0) {
|
|
if_inc_counter(ni->ni_vap->iv_ifp,
|
|
IFCOUNTER_OERRORS, 1);
|
|
STAILQ_INSERT_HEAD(&sc->sc_tx_inactive, bf, next);
|
|
m_freem(m);
|
|
ieee80211_free_node(ni);
|
|
break;
|
|
}
|
|
sc->sc_txtimer = 5;
|
|
callout_reset(&sc->sc_watchdog_ch, hz, urtwn_watchdog, sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_parent(struct ieee80211com *ic)
|
|
{
|
|
struct urtwn_softc *sc = ic->ic_softc;
|
|
int startall = 0;
|
|
|
|
URTWN_LOCK(sc);
|
|
if (sc->sc_flags & URTWN_DETACHED) {
|
|
URTWN_UNLOCK(sc);
|
|
return;
|
|
}
|
|
if (ic->ic_nrunning > 0) {
|
|
if ((sc->sc_flags & URTWN_RUNNING) == 0) {
|
|
urtwn_init(sc);
|
|
startall = 1;
|
|
}
|
|
} else if (sc->sc_flags & URTWN_RUNNING)
|
|
urtwn_stop(sc);
|
|
URTWN_UNLOCK(sc);
|
|
|
|
if (startall)
|
|
ieee80211_start_all(ic);
|
|
}
|
|
|
|
static __inline int
|
|
urtwn_power_on(struct urtwn_softc *sc)
|
|
{
|
|
|
|
return sc->sc_power_on(sc);
|
|
}
|
|
|
|
static int
|
|
urtwn_r92c_power_on(struct urtwn_softc *sc)
|
|
{
|
|
uint32_t reg;
|
|
int ntries;
|
|
|
|
/* Wait for autoload done bit. */
|
|
for (ntries = 0; ntries < 1000; ntries++) {
|
|
if (urtwn_read_1(sc, R92C_APS_FSMCO) & R92C_APS_FSMCO_PFM_ALDN)
|
|
break;
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
if (ntries == 1000) {
|
|
device_printf(sc->sc_dev,
|
|
"timeout waiting for chip autoload\n");
|
|
return (ETIMEDOUT);
|
|
}
|
|
|
|
/* Unlock ISO/CLK/Power control register. */
|
|
urtwn_write_1(sc, R92C_RSV_CTRL, 0);
|
|
/* Move SPS into PWM mode. */
|
|
urtwn_write_1(sc, R92C_SPS0_CTRL, 0x2b);
|
|
urtwn_ms_delay(sc);
|
|
|
|
reg = urtwn_read_1(sc, R92C_LDOV12D_CTRL);
|
|
if (!(reg & R92C_LDOV12D_CTRL_LDV12_EN)) {
|
|
urtwn_write_1(sc, R92C_LDOV12D_CTRL,
|
|
reg | R92C_LDOV12D_CTRL_LDV12_EN);
|
|
urtwn_ms_delay(sc);
|
|
urtwn_write_1(sc, R92C_SYS_ISO_CTRL,
|
|
urtwn_read_1(sc, R92C_SYS_ISO_CTRL) &
|
|
~R92C_SYS_ISO_CTRL_MD2PP);
|
|
}
|
|
|
|
/* Auto enable WLAN. */
|
|
urtwn_write_2(sc, R92C_APS_FSMCO,
|
|
urtwn_read_2(sc, R92C_APS_FSMCO) | R92C_APS_FSMCO_APFM_ONMAC);
|
|
for (ntries = 0; ntries < 1000; ntries++) {
|
|
if (!(urtwn_read_2(sc, R92C_APS_FSMCO) &
|
|
R92C_APS_FSMCO_APFM_ONMAC))
|
|
break;
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
if (ntries == 1000) {
|
|
device_printf(sc->sc_dev,
|
|
"timeout waiting for MAC auto ON\n");
|
|
return (ETIMEDOUT);
|
|
}
|
|
|
|
/* Enable radio, GPIO and LED functions. */
|
|
urtwn_write_2(sc, R92C_APS_FSMCO,
|
|
R92C_APS_FSMCO_AFSM_HSUS |
|
|
R92C_APS_FSMCO_PDN_EN |
|
|
R92C_APS_FSMCO_PFM_ALDN);
|
|
/* Release RF digital isolation. */
|
|
urtwn_write_2(sc, R92C_SYS_ISO_CTRL,
|
|
urtwn_read_2(sc, R92C_SYS_ISO_CTRL) & ~R92C_SYS_ISO_CTRL_DIOR);
|
|
|
|
/* Initialize MAC. */
|
|
urtwn_write_1(sc, R92C_APSD_CTRL,
|
|
urtwn_read_1(sc, R92C_APSD_CTRL) & ~R92C_APSD_CTRL_OFF);
|
|
for (ntries = 0; ntries < 200; ntries++) {
|
|
if (!(urtwn_read_1(sc, R92C_APSD_CTRL) &
|
|
R92C_APSD_CTRL_OFF_STATUS))
|
|
break;
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
if (ntries == 200) {
|
|
device_printf(sc->sc_dev,
|
|
"timeout waiting for MAC initialization\n");
|
|
return (ETIMEDOUT);
|
|
}
|
|
|
|
/* Enable MAC DMA/WMAC/SCHEDULE/SEC blocks. */
|
|
reg = urtwn_read_2(sc, R92C_CR);
|
|
reg |= R92C_CR_HCI_TXDMA_EN | R92C_CR_HCI_RXDMA_EN |
|
|
R92C_CR_TXDMA_EN | R92C_CR_RXDMA_EN | R92C_CR_PROTOCOL_EN |
|
|
R92C_CR_SCHEDULE_EN | R92C_CR_MACTXEN | R92C_CR_MACRXEN |
|
|
R92C_CR_ENSEC;
|
|
urtwn_write_2(sc, R92C_CR, reg);
|
|
|
|
urtwn_write_1(sc, 0xfe10, 0x19);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
urtwn_r88e_power_on(struct urtwn_softc *sc)
|
|
{
|
|
uint32_t reg;
|
|
int ntries;
|
|
|
|
/* Wait for power ready bit. */
|
|
for (ntries = 0; ntries < 5000; ntries++) {
|
|
if (urtwn_read_4(sc, R92C_APS_FSMCO) & R92C_APS_FSMCO_SUS_HOST)
|
|
break;
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
if (ntries == 5000) {
|
|
device_printf(sc->sc_dev,
|
|
"timeout waiting for chip power up\n");
|
|
return (ETIMEDOUT);
|
|
}
|
|
|
|
/* Reset BB. */
|
|
urtwn_write_1(sc, R92C_SYS_FUNC_EN,
|
|
urtwn_read_1(sc, R92C_SYS_FUNC_EN) & ~(R92C_SYS_FUNC_EN_BBRSTB |
|
|
R92C_SYS_FUNC_EN_BB_GLB_RST));
|
|
|
|
urtwn_write_1(sc, R92C_AFE_XTAL_CTRL + 2,
|
|
urtwn_read_1(sc, R92C_AFE_XTAL_CTRL + 2) | 0x80);
|
|
|
|
/* Disable HWPDN. */
|
|
urtwn_write_2(sc, R92C_APS_FSMCO,
|
|
urtwn_read_2(sc, R92C_APS_FSMCO) & ~R92C_APS_FSMCO_APDM_HPDN);
|
|
|
|
/* Disable WL suspend. */
|
|
urtwn_write_2(sc, R92C_APS_FSMCO,
|
|
urtwn_read_2(sc, R92C_APS_FSMCO) &
|
|
~(R92C_APS_FSMCO_AFSM_HSUS | R92C_APS_FSMCO_AFSM_PCIE));
|
|
|
|
urtwn_write_2(sc, R92C_APS_FSMCO,
|
|
urtwn_read_2(sc, R92C_APS_FSMCO) | R92C_APS_FSMCO_APFM_ONMAC);
|
|
for (ntries = 0; ntries < 5000; ntries++) {
|
|
if (!(urtwn_read_2(sc, R92C_APS_FSMCO) &
|
|
R92C_APS_FSMCO_APFM_ONMAC))
|
|
break;
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
if (ntries == 5000)
|
|
return (ETIMEDOUT);
|
|
|
|
/* Enable LDO normal mode. */
|
|
urtwn_write_1(sc, R92C_LPLDO_CTRL,
|
|
urtwn_read_1(sc, R92C_LPLDO_CTRL) & ~0x10);
|
|
|
|
/* Enable MAC DMA/WMAC/SCHEDULE/SEC blocks. */
|
|
urtwn_write_2(sc, R92C_CR, 0);
|
|
reg = urtwn_read_2(sc, R92C_CR);
|
|
reg |= R92C_CR_HCI_TXDMA_EN | R92C_CR_HCI_RXDMA_EN |
|
|
R92C_CR_TXDMA_EN | R92C_CR_RXDMA_EN | R92C_CR_PROTOCOL_EN |
|
|
R92C_CR_SCHEDULE_EN | R92C_CR_ENSEC | R92C_CR_CALTMR_EN;
|
|
urtwn_write_2(sc, R92C_CR, reg);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
urtwn_llt_init(struct urtwn_softc *sc)
|
|
{
|
|
int i, error, page_count, pktbuf_count;
|
|
|
|
page_count = (sc->chip & URTWN_CHIP_88E) ?
|
|
R88E_TX_PAGE_COUNT : R92C_TX_PAGE_COUNT;
|
|
pktbuf_count = (sc->chip & URTWN_CHIP_88E) ?
|
|
R88E_TXPKTBUF_COUNT : R92C_TXPKTBUF_COUNT;
|
|
|
|
/* Reserve pages [0; page_count]. */
|
|
for (i = 0; i < page_count; i++) {
|
|
if ((error = urtwn_llt_write(sc, i, i + 1)) != 0)
|
|
return (error);
|
|
}
|
|
/* NB: 0xff indicates end-of-list. */
|
|
if ((error = urtwn_llt_write(sc, i, 0xff)) != 0)
|
|
return (error);
|
|
/*
|
|
* Use pages [page_count + 1; pktbuf_count - 1]
|
|
* as ring buffer.
|
|
*/
|
|
for (++i; i < pktbuf_count - 1; i++) {
|
|
if ((error = urtwn_llt_write(sc, i, i + 1)) != 0)
|
|
return (error);
|
|
}
|
|
/* Make the last page point to the beginning of the ring buffer. */
|
|
error = urtwn_llt_write(sc, i, page_count + 1);
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
urtwn_fw_reset(struct urtwn_softc *sc)
|
|
{
|
|
uint16_t reg;
|
|
int ntries;
|
|
|
|
/* Tell 8051 to reset itself. */
|
|
urtwn_write_1(sc, R92C_HMETFR + 3, 0x20);
|
|
|
|
/* Wait until 8051 resets by itself. */
|
|
for (ntries = 0; ntries < 100; ntries++) {
|
|
reg = urtwn_read_2(sc, R92C_SYS_FUNC_EN);
|
|
if (!(reg & R92C_SYS_FUNC_EN_CPUEN))
|
|
return;
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
/* Force 8051 reset. */
|
|
urtwn_write_2(sc, R92C_SYS_FUNC_EN, reg & ~R92C_SYS_FUNC_EN_CPUEN);
|
|
}
|
|
|
|
static void
|
|
urtwn_r88e_fw_reset(struct urtwn_softc *sc)
|
|
{
|
|
uint16_t reg;
|
|
|
|
reg = urtwn_read_2(sc, R92C_SYS_FUNC_EN);
|
|
urtwn_write_2(sc, R92C_SYS_FUNC_EN, reg & ~R92C_SYS_FUNC_EN_CPUEN);
|
|
urtwn_write_2(sc, R92C_SYS_FUNC_EN, reg | R92C_SYS_FUNC_EN_CPUEN);
|
|
}
|
|
|
|
static int
|
|
urtwn_fw_loadpage(struct urtwn_softc *sc, int page, const uint8_t *buf, int len)
|
|
{
|
|
uint32_t reg;
|
|
int off, mlen, error = 0;
|
|
|
|
reg = urtwn_read_4(sc, R92C_MCUFWDL);
|
|
reg = RW(reg, R92C_MCUFWDL_PAGE, page);
|
|
urtwn_write_4(sc, R92C_MCUFWDL, reg);
|
|
|
|
off = R92C_FW_START_ADDR;
|
|
while (len > 0) {
|
|
if (len > 196)
|
|
mlen = 196;
|
|
else if (len > 4)
|
|
mlen = 4;
|
|
else
|
|
mlen = 1;
|
|
/* XXX fix this deconst */
|
|
error = urtwn_write_region_1(sc, off,
|
|
__DECONST(uint8_t *, buf), mlen);
|
|
if (error != 0)
|
|
break;
|
|
off += mlen;
|
|
buf += mlen;
|
|
len -= mlen;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
urtwn_load_firmware(struct urtwn_softc *sc)
|
|
{
|
|
const struct firmware *fw;
|
|
const struct r92c_fw_hdr *hdr;
|
|
const char *imagename;
|
|
const u_char *ptr;
|
|
size_t len;
|
|
uint32_t reg;
|
|
int mlen, ntries, page, error;
|
|
|
|
URTWN_UNLOCK(sc);
|
|
/* Read firmware image from the filesystem. */
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
imagename = "urtwn-rtl8188eufw";
|
|
else if ((sc->chip & (URTWN_CHIP_UMC_A_CUT | URTWN_CHIP_92C)) ==
|
|
URTWN_CHIP_UMC_A_CUT)
|
|
imagename = "urtwn-rtl8192cfwU";
|
|
else
|
|
imagename = "urtwn-rtl8192cfwT";
|
|
|
|
fw = firmware_get(imagename);
|
|
URTWN_LOCK(sc);
|
|
if (fw == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"failed loadfirmware of file %s\n", imagename);
|
|
return (ENOENT);
|
|
}
|
|
|
|
len = fw->datasize;
|
|
|
|
if (len < sizeof(*hdr)) {
|
|
device_printf(sc->sc_dev, "firmware too short\n");
|
|
error = EINVAL;
|
|
goto fail;
|
|
}
|
|
ptr = fw->data;
|
|
hdr = (const struct r92c_fw_hdr *)ptr;
|
|
/* Check if there is a valid FW header and skip it. */
|
|
if ((le16toh(hdr->signature) >> 4) == 0x88c ||
|
|
(le16toh(hdr->signature) >> 4) == 0x88e ||
|
|
(le16toh(hdr->signature) >> 4) == 0x92c) {
|
|
DPRINTF("FW V%d.%d %02d-%02d %02d:%02d\n",
|
|
le16toh(hdr->version), le16toh(hdr->subversion),
|
|
hdr->month, hdr->date, hdr->hour, hdr->minute);
|
|
ptr += sizeof(*hdr);
|
|
len -= sizeof(*hdr);
|
|
}
|
|
|
|
if (urtwn_read_1(sc, R92C_MCUFWDL) & R92C_MCUFWDL_RAM_DL_SEL) {
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
urtwn_r88e_fw_reset(sc);
|
|
else
|
|
urtwn_fw_reset(sc);
|
|
urtwn_write_1(sc, R92C_MCUFWDL, 0);
|
|
}
|
|
|
|
if (!(sc->chip & URTWN_CHIP_88E)) {
|
|
urtwn_write_2(sc, R92C_SYS_FUNC_EN,
|
|
urtwn_read_2(sc, R92C_SYS_FUNC_EN) |
|
|
R92C_SYS_FUNC_EN_CPUEN);
|
|
}
|
|
urtwn_write_1(sc, R92C_MCUFWDL,
|
|
urtwn_read_1(sc, R92C_MCUFWDL) | R92C_MCUFWDL_EN);
|
|
urtwn_write_1(sc, R92C_MCUFWDL + 2,
|
|
urtwn_read_1(sc, R92C_MCUFWDL + 2) & ~0x08);
|
|
|
|
/* Reset the FWDL checksum. */
|
|
urtwn_write_1(sc, R92C_MCUFWDL,
|
|
urtwn_read_1(sc, R92C_MCUFWDL) | R92C_MCUFWDL_CHKSUM_RPT);
|
|
|
|
for (page = 0; len > 0; page++) {
|
|
mlen = min(len, R92C_FW_PAGE_SIZE);
|
|
error = urtwn_fw_loadpage(sc, page, ptr, mlen);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"could not load firmware page\n");
|
|
goto fail;
|
|
}
|
|
ptr += mlen;
|
|
len -= mlen;
|
|
}
|
|
urtwn_write_1(sc, R92C_MCUFWDL,
|
|
urtwn_read_1(sc, R92C_MCUFWDL) & ~R92C_MCUFWDL_EN);
|
|
urtwn_write_1(sc, R92C_MCUFWDL + 1, 0);
|
|
|
|
/* Wait for checksum report. */
|
|
for (ntries = 0; ntries < 1000; ntries++) {
|
|
if (urtwn_read_4(sc, R92C_MCUFWDL) & R92C_MCUFWDL_CHKSUM_RPT)
|
|
break;
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
if (ntries == 1000) {
|
|
device_printf(sc->sc_dev,
|
|
"timeout waiting for checksum report\n");
|
|
error = ETIMEDOUT;
|
|
goto fail;
|
|
}
|
|
|
|
reg = urtwn_read_4(sc, R92C_MCUFWDL);
|
|
reg = (reg & ~R92C_MCUFWDL_WINTINI_RDY) | R92C_MCUFWDL_RDY;
|
|
urtwn_write_4(sc, R92C_MCUFWDL, reg);
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
urtwn_r88e_fw_reset(sc);
|
|
/* Wait for firmware readiness. */
|
|
for (ntries = 0; ntries < 1000; ntries++) {
|
|
if (urtwn_read_4(sc, R92C_MCUFWDL) & R92C_MCUFWDL_WINTINI_RDY)
|
|
break;
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
if (ntries == 1000) {
|
|
device_printf(sc->sc_dev,
|
|
"timeout waiting for firmware readiness\n");
|
|
error = ETIMEDOUT;
|
|
goto fail;
|
|
}
|
|
fail:
|
|
firmware_put(fw, FIRMWARE_UNLOAD);
|
|
return (error);
|
|
}
|
|
|
|
static __inline int
|
|
urtwn_dma_init(struct urtwn_softc *sc)
|
|
{
|
|
|
|
return sc->sc_dma_init(sc);
|
|
}
|
|
|
|
static int
|
|
urtwn_r92c_dma_init(struct urtwn_softc *sc)
|
|
{
|
|
int hashq, hasnq, haslq, nqueues, nqpages, nrempages;
|
|
uint32_t reg;
|
|
int error;
|
|
|
|
/* Initialize LLT table. */
|
|
error = urtwn_llt_init(sc);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
/* Get Tx queues to USB endpoints mapping. */
|
|
hashq = hasnq = haslq = 0;
|
|
reg = urtwn_read_2(sc, R92C_USB_EP + 1);
|
|
DPRINTFN(2, "USB endpoints mapping 0x%x\n", reg);
|
|
if (MS(reg, R92C_USB_EP_HQ) != 0)
|
|
hashq = 1;
|
|
if (MS(reg, R92C_USB_EP_NQ) != 0)
|
|
hasnq = 1;
|
|
if (MS(reg, R92C_USB_EP_LQ) != 0)
|
|
haslq = 1;
|
|
nqueues = hashq + hasnq + haslq;
|
|
if (nqueues == 0)
|
|
return (EIO);
|
|
/* Get the number of pages for each queue. */
|
|
nqpages = (R92C_TX_PAGE_COUNT - R92C_PUBQ_NPAGES) / nqueues;
|
|
/* The remaining pages are assigned to the high priority queue. */
|
|
nrempages = (R92C_TX_PAGE_COUNT - R92C_PUBQ_NPAGES) % nqueues;
|
|
|
|
/* Set number of pages for normal priority queue. */
|
|
urtwn_write_1(sc, R92C_RQPN_NPQ, hasnq ? nqpages : 0);
|
|
urtwn_write_4(sc, R92C_RQPN,
|
|
/* Set number of pages for public queue. */
|
|
SM(R92C_RQPN_PUBQ, R92C_PUBQ_NPAGES) |
|
|
/* Set number of pages for high priority queue. */
|
|
SM(R92C_RQPN_HPQ, hashq ? nqpages + nrempages : 0) |
|
|
/* Set number of pages for low priority queue. */
|
|
SM(R92C_RQPN_LPQ, haslq ? nqpages : 0) |
|
|
/* Load values. */
|
|
R92C_RQPN_LD);
|
|
|
|
urtwn_write_1(sc, R92C_TXPKTBUF_BCNQ_BDNY, R92C_TX_PAGE_BOUNDARY);
|
|
urtwn_write_1(sc, R92C_TXPKTBUF_MGQ_BDNY, R92C_TX_PAGE_BOUNDARY);
|
|
urtwn_write_1(sc, R92C_TXPKTBUF_WMAC_LBK_BF_HD, R92C_TX_PAGE_BOUNDARY);
|
|
urtwn_write_1(sc, R92C_TRXFF_BNDY, R92C_TX_PAGE_BOUNDARY);
|
|
urtwn_write_1(sc, R92C_TDECTRL + 1, R92C_TX_PAGE_BOUNDARY);
|
|
|
|
/* Set queue to USB pipe mapping. */
|
|
reg = urtwn_read_2(sc, R92C_TRXDMA_CTRL);
|
|
reg &= ~R92C_TRXDMA_CTRL_QMAP_M;
|
|
if (nqueues == 1) {
|
|
if (hashq)
|
|
reg |= R92C_TRXDMA_CTRL_QMAP_HQ;
|
|
else if (hasnq)
|
|
reg |= R92C_TRXDMA_CTRL_QMAP_NQ;
|
|
else
|
|
reg |= R92C_TRXDMA_CTRL_QMAP_LQ;
|
|
} else if (nqueues == 2) {
|
|
/* All 2-endpoints configs have a high priority queue. */
|
|
if (!hashq)
|
|
return (EIO);
|
|
if (hasnq)
|
|
reg |= R92C_TRXDMA_CTRL_QMAP_HQ_NQ;
|
|
else
|
|
reg |= R92C_TRXDMA_CTRL_QMAP_HQ_LQ;
|
|
} else
|
|
reg |= R92C_TRXDMA_CTRL_QMAP_3EP;
|
|
urtwn_write_2(sc, R92C_TRXDMA_CTRL, reg);
|
|
|
|
/* Set Tx/Rx transfer page boundary. */
|
|
urtwn_write_2(sc, R92C_TRXFF_BNDY + 2, 0x27ff);
|
|
|
|
/* Set Tx/Rx transfer page size. */
|
|
urtwn_write_1(sc, R92C_PBP,
|
|
SM(R92C_PBP_PSRX, R92C_PBP_128) |
|
|
SM(R92C_PBP_PSTX, R92C_PBP_128));
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
urtwn_r88e_dma_init(struct urtwn_softc *sc)
|
|
{
|
|
struct usb_interface *iface;
|
|
uint32_t reg;
|
|
int nqueues;
|
|
int error;
|
|
|
|
/* Initialize LLT table. */
|
|
error = urtwn_llt_init(sc);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
/* Get Tx queues to USB endpoints mapping. */
|
|
iface = usbd_get_iface(sc->sc_udev, 0);
|
|
nqueues = iface->idesc->bNumEndpoints - 1;
|
|
if (nqueues == 0)
|
|
return (EIO);
|
|
|
|
/* Set number of pages for normal priority queue. */
|
|
urtwn_write_2(sc, R92C_RQPN_NPQ, 0x000d);
|
|
urtwn_write_4(sc, R92C_RQPN, 0x808e000d);
|
|
|
|
urtwn_write_1(sc, R92C_TXPKTBUF_BCNQ_BDNY, R88E_TX_PAGE_BOUNDARY);
|
|
urtwn_write_1(sc, R92C_TXPKTBUF_MGQ_BDNY, R88E_TX_PAGE_BOUNDARY);
|
|
urtwn_write_1(sc, R92C_TXPKTBUF_WMAC_LBK_BF_HD, R88E_TX_PAGE_BOUNDARY);
|
|
urtwn_write_1(sc, R92C_TRXFF_BNDY, R88E_TX_PAGE_BOUNDARY);
|
|
urtwn_write_1(sc, R92C_TDECTRL + 1, R88E_TX_PAGE_BOUNDARY);
|
|
|
|
/* Set queue to USB pipe mapping. */
|
|
reg = urtwn_read_2(sc, R92C_TRXDMA_CTRL);
|
|
reg &= ~R92C_TRXDMA_CTRL_QMAP_M;
|
|
if (nqueues == 1)
|
|
reg |= R92C_TRXDMA_CTRL_QMAP_LQ;
|
|
else if (nqueues == 2)
|
|
reg |= R92C_TRXDMA_CTRL_QMAP_HQ_NQ;
|
|
else
|
|
reg |= R92C_TRXDMA_CTRL_QMAP_3EP;
|
|
urtwn_write_2(sc, R92C_TRXDMA_CTRL, reg);
|
|
|
|
/* Set Tx/Rx transfer page boundary. */
|
|
urtwn_write_2(sc, R92C_TRXFF_BNDY + 2, 0x23ff);
|
|
|
|
/* Set Tx/Rx transfer page size. */
|
|
urtwn_write_1(sc, R92C_PBP,
|
|
SM(R92C_PBP_PSRX, R92C_PBP_128) |
|
|
SM(R92C_PBP_PSTX, R92C_PBP_128));
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
urtwn_mac_init(struct urtwn_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
/* Write MAC initialization values. */
|
|
if (sc->chip & URTWN_CHIP_88E) {
|
|
for (i = 0; i < nitems(rtl8188eu_mac); i++) {
|
|
urtwn_write_1(sc, rtl8188eu_mac[i].reg,
|
|
rtl8188eu_mac[i].val);
|
|
}
|
|
urtwn_write_1(sc, R92C_MAX_AGGR_NUM, 0x07);
|
|
} else {
|
|
for (i = 0; i < nitems(rtl8192cu_mac); i++)
|
|
urtwn_write_1(sc, rtl8192cu_mac[i].reg,
|
|
rtl8192cu_mac[i].val);
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_bb_init(struct urtwn_softc *sc)
|
|
{
|
|
const struct urtwn_bb_prog *prog;
|
|
uint32_t reg;
|
|
uint8_t crystalcap;
|
|
int i;
|
|
|
|
/* Enable BB and RF. */
|
|
urtwn_write_2(sc, R92C_SYS_FUNC_EN,
|
|
urtwn_read_2(sc, R92C_SYS_FUNC_EN) |
|
|
R92C_SYS_FUNC_EN_BBRSTB | R92C_SYS_FUNC_EN_BB_GLB_RST |
|
|
R92C_SYS_FUNC_EN_DIO_RF);
|
|
|
|
if (!(sc->chip & URTWN_CHIP_88E))
|
|
urtwn_write_2(sc, R92C_AFE_PLL_CTRL, 0xdb83);
|
|
|
|
urtwn_write_1(sc, R92C_RF_CTRL,
|
|
R92C_RF_CTRL_EN | R92C_RF_CTRL_RSTB | R92C_RF_CTRL_SDMRSTB);
|
|
urtwn_write_1(sc, R92C_SYS_FUNC_EN,
|
|
R92C_SYS_FUNC_EN_USBA | R92C_SYS_FUNC_EN_USBD |
|
|
R92C_SYS_FUNC_EN_BB_GLB_RST | R92C_SYS_FUNC_EN_BBRSTB);
|
|
|
|
if (!(sc->chip & URTWN_CHIP_88E)) {
|
|
urtwn_write_1(sc, R92C_LDOHCI12_CTRL, 0x0f);
|
|
urtwn_write_1(sc, 0x15, 0xe9);
|
|
urtwn_write_1(sc, R92C_AFE_XTAL_CTRL + 1, 0x80);
|
|
}
|
|
|
|
/* Select BB programming based on board type. */
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
prog = &rtl8188eu_bb_prog;
|
|
else if (!(sc->chip & URTWN_CHIP_92C)) {
|
|
if (sc->board_type == R92C_BOARD_TYPE_MINICARD)
|
|
prog = &rtl8188ce_bb_prog;
|
|
else if (sc->board_type == R92C_BOARD_TYPE_HIGHPA)
|
|
prog = &rtl8188ru_bb_prog;
|
|
else
|
|
prog = &rtl8188cu_bb_prog;
|
|
} else {
|
|
if (sc->board_type == R92C_BOARD_TYPE_MINICARD)
|
|
prog = &rtl8192ce_bb_prog;
|
|
else
|
|
prog = &rtl8192cu_bb_prog;
|
|
}
|
|
/* Write BB initialization values. */
|
|
for (i = 0; i < prog->count; i++) {
|
|
urtwn_bb_write(sc, prog->regs[i], prog->vals[i]);
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
|
|
if (sc->chip & URTWN_CHIP_92C_1T2R) {
|
|
/* 8192C 1T only configuration. */
|
|
reg = urtwn_bb_read(sc, R92C_FPGA0_TXINFO);
|
|
reg = (reg & ~0x00000003) | 0x2;
|
|
urtwn_bb_write(sc, R92C_FPGA0_TXINFO, reg);
|
|
|
|
reg = urtwn_bb_read(sc, R92C_FPGA1_TXINFO);
|
|
reg = (reg & ~0x00300033) | 0x00200022;
|
|
urtwn_bb_write(sc, R92C_FPGA1_TXINFO, reg);
|
|
|
|
reg = urtwn_bb_read(sc, R92C_CCK0_AFESETTING);
|
|
reg = (reg & ~0xff000000) | 0x45 << 24;
|
|
urtwn_bb_write(sc, R92C_CCK0_AFESETTING, reg);
|
|
|
|
reg = urtwn_bb_read(sc, R92C_OFDM0_TRXPATHENA);
|
|
reg = (reg & ~0x000000ff) | 0x23;
|
|
urtwn_bb_write(sc, R92C_OFDM0_TRXPATHENA, reg);
|
|
|
|
reg = urtwn_bb_read(sc, R92C_OFDM0_AGCPARAM1);
|
|
reg = (reg & ~0x00000030) | 1 << 4;
|
|
urtwn_bb_write(sc, R92C_OFDM0_AGCPARAM1, reg);
|
|
|
|
reg = urtwn_bb_read(sc, 0xe74);
|
|
reg = (reg & ~0x0c000000) | 2 << 26;
|
|
urtwn_bb_write(sc, 0xe74, reg);
|
|
reg = urtwn_bb_read(sc, 0xe78);
|
|
reg = (reg & ~0x0c000000) | 2 << 26;
|
|
urtwn_bb_write(sc, 0xe78, reg);
|
|
reg = urtwn_bb_read(sc, 0xe7c);
|
|
reg = (reg & ~0x0c000000) | 2 << 26;
|
|
urtwn_bb_write(sc, 0xe7c, reg);
|
|
reg = urtwn_bb_read(sc, 0xe80);
|
|
reg = (reg & ~0x0c000000) | 2 << 26;
|
|
urtwn_bb_write(sc, 0xe80, reg);
|
|
reg = urtwn_bb_read(sc, 0xe88);
|
|
reg = (reg & ~0x0c000000) | 2 << 26;
|
|
urtwn_bb_write(sc, 0xe88, reg);
|
|
}
|
|
|
|
/* Write AGC values. */
|
|
for (i = 0; i < prog->agccount; i++) {
|
|
urtwn_bb_write(sc, R92C_OFDM0_AGCRSSITABLE,
|
|
prog->agcvals[i]);
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
|
|
if (sc->chip & URTWN_CHIP_88E) {
|
|
urtwn_bb_write(sc, R92C_OFDM0_AGCCORE1(0), 0x69553422);
|
|
urtwn_ms_delay(sc);
|
|
urtwn_bb_write(sc, R92C_OFDM0_AGCCORE1(0), 0x69553420);
|
|
urtwn_ms_delay(sc);
|
|
|
|
crystalcap = sc->r88e_rom[0xb9];
|
|
if (crystalcap == 0xff)
|
|
crystalcap = 0x20;
|
|
crystalcap &= 0x3f;
|
|
reg = urtwn_bb_read(sc, R92C_AFE_XTAL_CTRL);
|
|
urtwn_bb_write(sc, R92C_AFE_XTAL_CTRL,
|
|
RW(reg, R92C_AFE_XTAL_CTRL_ADDR,
|
|
crystalcap | crystalcap << 6));
|
|
} else {
|
|
if (urtwn_bb_read(sc, R92C_HSSI_PARAM2(0)) &
|
|
R92C_HSSI_PARAM2_CCK_HIPWR)
|
|
sc->sc_flags |= URTWN_FLAG_CCK_HIPWR;
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_rf_init(struct urtwn_softc *sc)
|
|
{
|
|
const struct urtwn_rf_prog *prog;
|
|
uint32_t reg, type;
|
|
int i, j, idx, off;
|
|
|
|
/* Select RF programming based on board type. */
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
prog = rtl8188eu_rf_prog;
|
|
else if (!(sc->chip & URTWN_CHIP_92C)) {
|
|
if (sc->board_type == R92C_BOARD_TYPE_MINICARD)
|
|
prog = rtl8188ce_rf_prog;
|
|
else if (sc->board_type == R92C_BOARD_TYPE_HIGHPA)
|
|
prog = rtl8188ru_rf_prog;
|
|
else
|
|
prog = rtl8188cu_rf_prog;
|
|
} else
|
|
prog = rtl8192ce_rf_prog;
|
|
|
|
for (i = 0; i < sc->nrxchains; i++) {
|
|
/* Save RF_ENV control type. */
|
|
idx = i / 2;
|
|
off = (i % 2) * 16;
|
|
reg = urtwn_bb_read(sc, R92C_FPGA0_RFIFACESW(idx));
|
|
type = (reg >> off) & 0x10;
|
|
|
|
/* Set RF_ENV enable. */
|
|
reg = urtwn_bb_read(sc, R92C_FPGA0_RFIFACEOE(i));
|
|
reg |= 0x100000;
|
|
urtwn_bb_write(sc, R92C_FPGA0_RFIFACEOE(i), reg);
|
|
urtwn_ms_delay(sc);
|
|
/* Set RF_ENV output high. */
|
|
reg = urtwn_bb_read(sc, R92C_FPGA0_RFIFACEOE(i));
|
|
reg |= 0x10;
|
|
urtwn_bb_write(sc, R92C_FPGA0_RFIFACEOE(i), reg);
|
|
urtwn_ms_delay(sc);
|
|
/* Set address and data lengths of RF registers. */
|
|
reg = urtwn_bb_read(sc, R92C_HSSI_PARAM2(i));
|
|
reg &= ~R92C_HSSI_PARAM2_ADDR_LENGTH;
|
|
urtwn_bb_write(sc, R92C_HSSI_PARAM2(i), reg);
|
|
urtwn_ms_delay(sc);
|
|
reg = urtwn_bb_read(sc, R92C_HSSI_PARAM2(i));
|
|
reg &= ~R92C_HSSI_PARAM2_DATA_LENGTH;
|
|
urtwn_bb_write(sc, R92C_HSSI_PARAM2(i), reg);
|
|
urtwn_ms_delay(sc);
|
|
|
|
/* Write RF initialization values for this chain. */
|
|
for (j = 0; j < prog[i].count; j++) {
|
|
if (prog[i].regs[j] >= 0xf9 &&
|
|
prog[i].regs[j] <= 0xfe) {
|
|
/*
|
|
* These are fake RF registers offsets that
|
|
* indicate a delay is required.
|
|
*/
|
|
usb_pause_mtx(&sc->sc_mtx, hz / 20); /* 50ms */
|
|
continue;
|
|
}
|
|
urtwn_rf_write(sc, i, prog[i].regs[j],
|
|
prog[i].vals[j]);
|
|
urtwn_ms_delay(sc);
|
|
}
|
|
|
|
/* Restore RF_ENV control type. */
|
|
reg = urtwn_bb_read(sc, R92C_FPGA0_RFIFACESW(idx));
|
|
reg &= ~(0x10 << off) | (type << off);
|
|
urtwn_bb_write(sc, R92C_FPGA0_RFIFACESW(idx), reg);
|
|
|
|
/* Cache RF register CHNLBW. */
|
|
sc->rf_chnlbw[i] = urtwn_rf_read(sc, i, R92C_RF_CHNLBW);
|
|
}
|
|
|
|
if ((sc->chip & (URTWN_CHIP_UMC_A_CUT | URTWN_CHIP_92C)) ==
|
|
URTWN_CHIP_UMC_A_CUT) {
|
|
urtwn_rf_write(sc, 0, R92C_RF_RX_G1, 0x30255);
|
|
urtwn_rf_write(sc, 0, R92C_RF_RX_G2, 0x50a00);
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_cam_init(struct urtwn_softc *sc)
|
|
{
|
|
/* Invalidate all CAM entries. */
|
|
urtwn_write_4(sc, R92C_CAMCMD,
|
|
R92C_CAMCMD_POLLING | R92C_CAMCMD_CLR);
|
|
}
|
|
|
|
static void
|
|
urtwn_pa_bias_init(struct urtwn_softc *sc)
|
|
{
|
|
uint8_t reg;
|
|
int i;
|
|
|
|
for (i = 0; i < sc->nrxchains; i++) {
|
|
if (sc->pa_setting & (1 << i))
|
|
continue;
|
|
urtwn_rf_write(sc, i, R92C_RF_IPA, 0x0f406);
|
|
urtwn_rf_write(sc, i, R92C_RF_IPA, 0x4f406);
|
|
urtwn_rf_write(sc, i, R92C_RF_IPA, 0x8f406);
|
|
urtwn_rf_write(sc, i, R92C_RF_IPA, 0xcf406);
|
|
}
|
|
if (!(sc->pa_setting & 0x10)) {
|
|
reg = urtwn_read_1(sc, 0x16);
|
|
reg = (reg & ~0xf0) | 0x90;
|
|
urtwn_write_1(sc, 0x16, reg);
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_rxfilter_init(struct urtwn_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
|
|
uint32_t rcr;
|
|
uint16_t filter;
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
|
|
/* Accept all multicast frames. */
|
|
urtwn_write_4(sc, R92C_MAR + 0, 0xffffffff);
|
|
urtwn_write_4(sc, R92C_MAR + 4, 0xffffffff);
|
|
|
|
/* Filter for management frames. */
|
|
filter = 0x7f3f;
|
|
switch (vap->iv_opmode) {
|
|
case IEEE80211_M_STA:
|
|
filter &= ~(
|
|
R92C_RXFLTMAP_SUBTYPE(IEEE80211_FC0_SUBTYPE_ASSOC_REQ) |
|
|
R92C_RXFLTMAP_SUBTYPE(IEEE80211_FC0_SUBTYPE_REASSOC_REQ) |
|
|
R92C_RXFLTMAP_SUBTYPE(IEEE80211_FC0_SUBTYPE_PROBE_REQ));
|
|
break;
|
|
case IEEE80211_M_HOSTAP:
|
|
filter &= ~(
|
|
R92C_RXFLTMAP_SUBTYPE(IEEE80211_FC0_SUBTYPE_ASSOC_RESP) |
|
|
R92C_RXFLTMAP_SUBTYPE(IEEE80211_FC0_SUBTYPE_REASSOC_RESP) |
|
|
R92C_RXFLTMAP_SUBTYPE(IEEE80211_FC0_SUBTYPE_BEACON));
|
|
break;
|
|
case IEEE80211_M_MONITOR:
|
|
case IEEE80211_M_IBSS:
|
|
break;
|
|
default:
|
|
device_printf(sc->sc_dev, "%s: undefined opmode %d\n",
|
|
__func__, vap->iv_opmode);
|
|
break;
|
|
}
|
|
urtwn_write_2(sc, R92C_RXFLTMAP0, filter);
|
|
|
|
/* Reject all control frames. */
|
|
urtwn_write_2(sc, R92C_RXFLTMAP1, 0x0000);
|
|
|
|
/* Reject all data frames. */
|
|
urtwn_write_2(sc, R92C_RXFLTMAP2, 0x0000);
|
|
|
|
rcr = R92C_RCR_AM | R92C_RCR_AB | R92C_RCR_APM |
|
|
R92C_RCR_HTC_LOC_CTRL | R92C_RCR_APP_PHYSTS |
|
|
R92C_RCR_APP_ICV | R92C_RCR_APP_MIC;
|
|
|
|
if (vap->iv_opmode == IEEE80211_M_MONITOR) {
|
|
/* Accept all frames. */
|
|
rcr |= R92C_RCR_ACF | R92C_RCR_ADF | R92C_RCR_AMF |
|
|
R92C_RCR_AAP;
|
|
}
|
|
|
|
/* Set Rx filter. */
|
|
urtwn_write_4(sc, R92C_RCR, rcr);
|
|
|
|
if (ic->ic_promisc != 0) {
|
|
/* Update Rx filter. */
|
|
urtwn_set_promisc(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_edca_init(struct urtwn_softc *sc)
|
|
{
|
|
urtwn_write_2(sc, R92C_SPEC_SIFS, 0x100a);
|
|
urtwn_write_2(sc, R92C_MAC_SPEC_SIFS, 0x100a);
|
|
urtwn_write_2(sc, R92C_SIFS_CCK, 0x100a);
|
|
urtwn_write_2(sc, R92C_SIFS_OFDM, 0x100a);
|
|
urtwn_write_4(sc, R92C_EDCA_BE_PARAM, 0x005ea42b);
|
|
urtwn_write_4(sc, R92C_EDCA_BK_PARAM, 0x0000a44f);
|
|
urtwn_write_4(sc, R92C_EDCA_VI_PARAM, 0x005ea324);
|
|
urtwn_write_4(sc, R92C_EDCA_VO_PARAM, 0x002fa226);
|
|
}
|
|
|
|
static void
|
|
urtwn_write_txpower(struct urtwn_softc *sc, int chain,
|
|
uint16_t power[URTWN_RIDX_COUNT])
|
|
{
|
|
uint32_t reg;
|
|
|
|
/* Write per-CCK rate Tx power. */
|
|
if (chain == 0) {
|
|
reg = urtwn_bb_read(sc, R92C_TXAGC_A_CCK1_MCS32);
|
|
reg = RW(reg, R92C_TXAGC_A_CCK1, power[0]);
|
|
urtwn_bb_write(sc, R92C_TXAGC_A_CCK1_MCS32, reg);
|
|
reg = urtwn_bb_read(sc, R92C_TXAGC_B_CCK11_A_CCK2_11);
|
|
reg = RW(reg, R92C_TXAGC_A_CCK2, power[1]);
|
|
reg = RW(reg, R92C_TXAGC_A_CCK55, power[2]);
|
|
reg = RW(reg, R92C_TXAGC_A_CCK11, power[3]);
|
|
urtwn_bb_write(sc, R92C_TXAGC_B_CCK11_A_CCK2_11, reg);
|
|
} else {
|
|
reg = urtwn_bb_read(sc, R92C_TXAGC_B_CCK1_55_MCS32);
|
|
reg = RW(reg, R92C_TXAGC_B_CCK1, power[0]);
|
|
reg = RW(reg, R92C_TXAGC_B_CCK2, power[1]);
|
|
reg = RW(reg, R92C_TXAGC_B_CCK55, power[2]);
|
|
urtwn_bb_write(sc, R92C_TXAGC_B_CCK1_55_MCS32, reg);
|
|
reg = urtwn_bb_read(sc, R92C_TXAGC_B_CCK11_A_CCK2_11);
|
|
reg = RW(reg, R92C_TXAGC_B_CCK11, power[3]);
|
|
urtwn_bb_write(sc, R92C_TXAGC_B_CCK11_A_CCK2_11, reg);
|
|
}
|
|
/* Write per-OFDM rate Tx power. */
|
|
urtwn_bb_write(sc, R92C_TXAGC_RATE18_06(chain),
|
|
SM(R92C_TXAGC_RATE06, power[ 4]) |
|
|
SM(R92C_TXAGC_RATE09, power[ 5]) |
|
|
SM(R92C_TXAGC_RATE12, power[ 6]) |
|
|
SM(R92C_TXAGC_RATE18, power[ 7]));
|
|
urtwn_bb_write(sc, R92C_TXAGC_RATE54_24(chain),
|
|
SM(R92C_TXAGC_RATE24, power[ 8]) |
|
|
SM(R92C_TXAGC_RATE36, power[ 9]) |
|
|
SM(R92C_TXAGC_RATE48, power[10]) |
|
|
SM(R92C_TXAGC_RATE54, power[11]));
|
|
/* Write per-MCS Tx power. */
|
|
urtwn_bb_write(sc, R92C_TXAGC_MCS03_MCS00(chain),
|
|
SM(R92C_TXAGC_MCS00, power[12]) |
|
|
SM(R92C_TXAGC_MCS01, power[13]) |
|
|
SM(R92C_TXAGC_MCS02, power[14]) |
|
|
SM(R92C_TXAGC_MCS03, power[15]));
|
|
urtwn_bb_write(sc, R92C_TXAGC_MCS07_MCS04(chain),
|
|
SM(R92C_TXAGC_MCS04, power[16]) |
|
|
SM(R92C_TXAGC_MCS05, power[17]) |
|
|
SM(R92C_TXAGC_MCS06, power[18]) |
|
|
SM(R92C_TXAGC_MCS07, power[19]));
|
|
urtwn_bb_write(sc, R92C_TXAGC_MCS11_MCS08(chain),
|
|
SM(R92C_TXAGC_MCS08, power[20]) |
|
|
SM(R92C_TXAGC_MCS09, power[21]) |
|
|
SM(R92C_TXAGC_MCS10, power[22]) |
|
|
SM(R92C_TXAGC_MCS11, power[23]));
|
|
urtwn_bb_write(sc, R92C_TXAGC_MCS15_MCS12(chain),
|
|
SM(R92C_TXAGC_MCS12, power[24]) |
|
|
SM(R92C_TXAGC_MCS13, power[25]) |
|
|
SM(R92C_TXAGC_MCS14, power[26]) |
|
|
SM(R92C_TXAGC_MCS15, power[27]));
|
|
}
|
|
|
|
static void
|
|
urtwn_get_txpower(struct urtwn_softc *sc, int chain,
|
|
struct ieee80211_channel *c, struct ieee80211_channel *extc,
|
|
uint16_t power[URTWN_RIDX_COUNT])
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct r92c_rom *rom = &sc->rom;
|
|
uint16_t cckpow, ofdmpow, htpow, diff, max;
|
|
const struct urtwn_txpwr *base;
|
|
int ridx, chan, group;
|
|
|
|
/* Determine channel group. */
|
|
chan = ieee80211_chan2ieee(ic, c); /* XXX center freq! */
|
|
if (chan <= 3)
|
|
group = 0;
|
|
else if (chan <= 9)
|
|
group = 1;
|
|
else
|
|
group = 2;
|
|
|
|
/* Get original Tx power based on board type and RF chain. */
|
|
if (!(sc->chip & URTWN_CHIP_92C)) {
|
|
if (sc->board_type == R92C_BOARD_TYPE_HIGHPA)
|
|
base = &rtl8188ru_txagc[chain];
|
|
else
|
|
base = &rtl8192cu_txagc[chain];
|
|
} else
|
|
base = &rtl8192cu_txagc[chain];
|
|
|
|
memset(power, 0, URTWN_RIDX_COUNT * sizeof(power[0]));
|
|
if (sc->regulatory == 0) {
|
|
for (ridx = URTWN_RIDX_CCK1; ridx <= URTWN_RIDX_CCK11; ridx++)
|
|
power[ridx] = base->pwr[0][ridx];
|
|
}
|
|
for (ridx = URTWN_RIDX_OFDM6; ridx < URTWN_RIDX_COUNT; ridx++) {
|
|
if (sc->regulatory == 3) {
|
|
power[ridx] = base->pwr[0][ridx];
|
|
/* Apply vendor limits. */
|
|
if (extc != NULL)
|
|
max = rom->ht40_max_pwr[group];
|
|
else
|
|
max = rom->ht20_max_pwr[group];
|
|
max = (max >> (chain * 4)) & 0xf;
|
|
if (power[ridx] > max)
|
|
power[ridx] = max;
|
|
} else if (sc->regulatory == 1) {
|
|
if (extc == NULL)
|
|
power[ridx] = base->pwr[group][ridx];
|
|
} else if (sc->regulatory != 2)
|
|
power[ridx] = base->pwr[0][ridx];
|
|
}
|
|
|
|
/* Compute per-CCK rate Tx power. */
|
|
cckpow = rom->cck_tx_pwr[chain][group];
|
|
for (ridx = URTWN_RIDX_CCK1; ridx <= URTWN_RIDX_CCK11; ridx++) {
|
|
power[ridx] += cckpow;
|
|
if (power[ridx] > R92C_MAX_TX_PWR)
|
|
power[ridx] = R92C_MAX_TX_PWR;
|
|
}
|
|
|
|
htpow = rom->ht40_1s_tx_pwr[chain][group];
|
|
if (sc->ntxchains > 1) {
|
|
/* Apply reduction for 2 spatial streams. */
|
|
diff = rom->ht40_2s_tx_pwr_diff[group];
|
|
diff = (diff >> (chain * 4)) & 0xf;
|
|
htpow = (htpow > diff) ? htpow - diff : 0;
|
|
}
|
|
|
|
/* Compute per-OFDM rate Tx power. */
|
|
diff = rom->ofdm_tx_pwr_diff[group];
|
|
diff = (diff >> (chain * 4)) & 0xf;
|
|
ofdmpow = htpow + diff; /* HT->OFDM correction. */
|
|
for (ridx = URTWN_RIDX_OFDM6; ridx <= URTWN_RIDX_OFDM54; ridx++) {
|
|
power[ridx] += ofdmpow;
|
|
if (power[ridx] > R92C_MAX_TX_PWR)
|
|
power[ridx] = R92C_MAX_TX_PWR;
|
|
}
|
|
|
|
/* Compute per-MCS Tx power. */
|
|
if (extc == NULL) {
|
|
diff = rom->ht20_tx_pwr_diff[group];
|
|
diff = (diff >> (chain * 4)) & 0xf;
|
|
htpow += diff; /* HT40->HT20 correction. */
|
|
}
|
|
for (ridx = 12; ridx <= 27; ridx++) {
|
|
power[ridx] += htpow;
|
|
if (power[ridx] > R92C_MAX_TX_PWR)
|
|
power[ridx] = R92C_MAX_TX_PWR;
|
|
}
|
|
#ifdef URTWN_DEBUG
|
|
if (urtwn_debug >= 4) {
|
|
/* Dump per-rate Tx power values. */
|
|
printf("Tx power for chain %d:\n", chain);
|
|
for (ridx = URTWN_RIDX_CCK1; ridx < URTWN_RIDX_COUNT; ridx++)
|
|
printf("Rate %d = %u\n", ridx, power[ridx]);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
urtwn_r88e_get_txpower(struct urtwn_softc *sc, int chain,
|
|
struct ieee80211_channel *c, struct ieee80211_channel *extc,
|
|
uint16_t power[URTWN_RIDX_COUNT])
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint16_t cckpow, ofdmpow, bw20pow, htpow;
|
|
const struct urtwn_r88e_txpwr *base;
|
|
int ridx, chan, group;
|
|
|
|
/* Determine channel group. */
|
|
chan = ieee80211_chan2ieee(ic, c); /* XXX center freq! */
|
|
if (chan <= 2)
|
|
group = 0;
|
|
else if (chan <= 5)
|
|
group = 1;
|
|
else if (chan <= 8)
|
|
group = 2;
|
|
else if (chan <= 11)
|
|
group = 3;
|
|
else if (chan <= 13)
|
|
group = 4;
|
|
else
|
|
group = 5;
|
|
|
|
/* Get original Tx power based on board type and RF chain. */
|
|
base = &rtl8188eu_txagc[chain];
|
|
|
|
memset(power, 0, URTWN_RIDX_COUNT * sizeof(power[0]));
|
|
if (sc->regulatory == 0) {
|
|
for (ridx = URTWN_RIDX_CCK1; ridx <= URTWN_RIDX_CCK11; ridx++)
|
|
power[ridx] = base->pwr[0][ridx];
|
|
}
|
|
for (ridx = URTWN_RIDX_OFDM6; ridx < URTWN_RIDX_COUNT; ridx++) {
|
|
if (sc->regulatory == 3)
|
|
power[ridx] = base->pwr[0][ridx];
|
|
else if (sc->regulatory == 1) {
|
|
if (extc == NULL)
|
|
power[ridx] = base->pwr[group][ridx];
|
|
} else if (sc->regulatory != 2)
|
|
power[ridx] = base->pwr[0][ridx];
|
|
}
|
|
|
|
/* Compute per-CCK rate Tx power. */
|
|
cckpow = sc->cck_tx_pwr[group];
|
|
for (ridx = URTWN_RIDX_CCK1; ridx <= URTWN_RIDX_CCK11; ridx++) {
|
|
power[ridx] += cckpow;
|
|
if (power[ridx] > R92C_MAX_TX_PWR)
|
|
power[ridx] = R92C_MAX_TX_PWR;
|
|
}
|
|
|
|
htpow = sc->ht40_tx_pwr[group];
|
|
|
|
/* Compute per-OFDM rate Tx power. */
|
|
ofdmpow = htpow + sc->ofdm_tx_pwr_diff;
|
|
for (ridx = URTWN_RIDX_OFDM6; ridx <= URTWN_RIDX_OFDM54; ridx++) {
|
|
power[ridx] += ofdmpow;
|
|
if (power[ridx] > R92C_MAX_TX_PWR)
|
|
power[ridx] = R92C_MAX_TX_PWR;
|
|
}
|
|
|
|
bw20pow = htpow + sc->bw20_tx_pwr_diff;
|
|
for (ridx = 12; ridx <= 27; ridx++) {
|
|
power[ridx] += bw20pow;
|
|
if (power[ridx] > R92C_MAX_TX_PWR)
|
|
power[ridx] = R92C_MAX_TX_PWR;
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_set_txpower(struct urtwn_softc *sc, struct ieee80211_channel *c,
|
|
struct ieee80211_channel *extc)
|
|
{
|
|
uint16_t power[URTWN_RIDX_COUNT];
|
|
int i;
|
|
|
|
for (i = 0; i < sc->ntxchains; i++) {
|
|
/* Compute per-rate Tx power values. */
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
urtwn_r88e_get_txpower(sc, i, c, extc, power);
|
|
else
|
|
urtwn_get_txpower(sc, i, c, extc, power);
|
|
/* Write per-rate Tx power values to hardware. */
|
|
urtwn_write_txpower(sc, i, power);
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_set_rx_bssid_all(struct urtwn_softc *sc, int enable)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = urtwn_read_4(sc, R92C_RCR);
|
|
if (enable)
|
|
reg &= ~R92C_RCR_CBSSID_BCN;
|
|
else
|
|
reg |= R92C_RCR_CBSSID_BCN;
|
|
urtwn_write_4(sc, R92C_RCR, reg);
|
|
}
|
|
|
|
static void
|
|
urtwn_set_gain(struct urtwn_softc *sc, uint8_t gain)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = urtwn_bb_read(sc, R92C_OFDM0_AGCCORE1(0));
|
|
reg = RW(reg, R92C_OFDM0_AGCCORE1_GAIN, gain);
|
|
urtwn_bb_write(sc, R92C_OFDM0_AGCCORE1(0), reg);
|
|
|
|
if (!(sc->chip & URTWN_CHIP_88E)) {
|
|
reg = urtwn_bb_read(sc, R92C_OFDM0_AGCCORE1(1));
|
|
reg = RW(reg, R92C_OFDM0_AGCCORE1_GAIN, gain);
|
|
urtwn_bb_write(sc, R92C_OFDM0_AGCCORE1(1), reg);
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_scan_start(struct ieee80211com *ic)
|
|
{
|
|
struct urtwn_softc *sc = ic->ic_softc;
|
|
|
|
URTWN_LOCK(sc);
|
|
/* Receive beacons / probe responses from any BSSID. */
|
|
if (ic->ic_opmode != IEEE80211_M_IBSS)
|
|
urtwn_set_rx_bssid_all(sc, 1);
|
|
|
|
/* Set gain for scanning. */
|
|
urtwn_set_gain(sc, 0x20);
|
|
URTWN_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
urtwn_scan_end(struct ieee80211com *ic)
|
|
{
|
|
struct urtwn_softc *sc = ic->ic_softc;
|
|
|
|
URTWN_LOCK(sc);
|
|
/* Restore limitations. */
|
|
if (ic->ic_promisc == 0 && ic->ic_opmode != IEEE80211_M_IBSS)
|
|
urtwn_set_rx_bssid_all(sc, 0);
|
|
|
|
/* Set gain under link. */
|
|
urtwn_set_gain(sc, 0x32);
|
|
URTWN_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
urtwn_set_channel(struct ieee80211com *ic)
|
|
{
|
|
struct urtwn_softc *sc = ic->ic_softc;
|
|
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
|
|
|
|
URTWN_LOCK(sc);
|
|
if (vap->iv_state == IEEE80211_S_SCAN) {
|
|
/* Make link LED blink during scan. */
|
|
urtwn_set_led(sc, URTWN_LED_LINK, !sc->ledlink);
|
|
}
|
|
urtwn_set_chan(sc, ic->ic_curchan, NULL);
|
|
URTWN_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
urtwn_set_promisc(struct urtwn_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
|
|
uint32_t rcr, mask1, mask2;
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
|
|
if (vap->iv_opmode == IEEE80211_M_MONITOR)
|
|
return;
|
|
|
|
mask1 = R92C_RCR_ACF | R92C_RCR_ADF | R92C_RCR_AMF | R92C_RCR_AAP;
|
|
mask2 = R92C_RCR_APM;
|
|
|
|
if (vap->iv_state == IEEE80211_S_RUN) {
|
|
switch (vap->iv_opmode) {
|
|
case IEEE80211_M_STA:
|
|
mask2 |= R92C_RCR_CBSSID_DATA;
|
|
/* FALLTHROUGH */
|
|
case IEEE80211_M_HOSTAP:
|
|
mask2 |= R92C_RCR_CBSSID_BCN;
|
|
break;
|
|
case IEEE80211_M_IBSS:
|
|
mask2 |= R92C_RCR_CBSSID_DATA;
|
|
break;
|
|
default:
|
|
device_printf(sc->sc_dev, "%s: undefined opmode %d\n",
|
|
__func__, vap->iv_opmode);
|
|
return;
|
|
}
|
|
}
|
|
|
|
rcr = urtwn_read_4(sc, R92C_RCR);
|
|
if (ic->ic_promisc == 0)
|
|
rcr = (rcr & ~mask1) | mask2;
|
|
else
|
|
rcr = (rcr & ~mask2) | mask1;
|
|
urtwn_write_4(sc, R92C_RCR, rcr);
|
|
}
|
|
|
|
static void
|
|
urtwn_update_promisc(struct ieee80211com *ic)
|
|
{
|
|
struct urtwn_softc *sc = ic->ic_softc;
|
|
|
|
URTWN_LOCK(sc);
|
|
if (sc->sc_flags & URTWN_RUNNING)
|
|
urtwn_set_promisc(sc);
|
|
URTWN_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
urtwn_update_mcast(struct ieee80211com *ic)
|
|
{
|
|
/* XXX do nothing? */
|
|
}
|
|
|
|
static void
|
|
urtwn_set_chan(struct urtwn_softc *sc, struct ieee80211_channel *c,
|
|
struct ieee80211_channel *extc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint32_t reg;
|
|
u_int chan;
|
|
int i;
|
|
|
|
chan = ieee80211_chan2ieee(ic, c); /* XXX center freq! */
|
|
if (chan == 0 || chan == IEEE80211_CHAN_ANY) {
|
|
device_printf(sc->sc_dev,
|
|
"%s: invalid channel %x\n", __func__, chan);
|
|
return;
|
|
}
|
|
|
|
/* Set Tx power for this new channel. */
|
|
urtwn_set_txpower(sc, c, extc);
|
|
|
|
for (i = 0; i < sc->nrxchains; i++) {
|
|
urtwn_rf_write(sc, i, R92C_RF_CHNLBW,
|
|
RW(sc->rf_chnlbw[i], R92C_RF_CHNLBW_CHNL, chan));
|
|
}
|
|
#ifndef IEEE80211_NO_HT
|
|
if (extc != NULL) {
|
|
/* Is secondary channel below or above primary? */
|
|
int prichlo = c->ic_freq < extc->ic_freq;
|
|
|
|
urtwn_write_1(sc, R92C_BWOPMODE,
|
|
urtwn_read_1(sc, R92C_BWOPMODE) & ~R92C_BWOPMODE_20MHZ);
|
|
|
|
reg = urtwn_read_1(sc, R92C_RRSR + 2);
|
|
reg = (reg & ~0x6f) | (prichlo ? 1 : 2) << 5;
|
|
urtwn_write_1(sc, R92C_RRSR + 2, reg);
|
|
|
|
urtwn_bb_write(sc, R92C_FPGA0_RFMOD,
|
|
urtwn_bb_read(sc, R92C_FPGA0_RFMOD) | R92C_RFMOD_40MHZ);
|
|
urtwn_bb_write(sc, R92C_FPGA1_RFMOD,
|
|
urtwn_bb_read(sc, R92C_FPGA1_RFMOD) | R92C_RFMOD_40MHZ);
|
|
|
|
/* Set CCK side band. */
|
|
reg = urtwn_bb_read(sc, R92C_CCK0_SYSTEM);
|
|
reg = (reg & ~0x00000010) | (prichlo ? 0 : 1) << 4;
|
|
urtwn_bb_write(sc, R92C_CCK0_SYSTEM, reg);
|
|
|
|
reg = urtwn_bb_read(sc, R92C_OFDM1_LSTF);
|
|
reg = (reg & ~0x00000c00) | (prichlo ? 1 : 2) << 10;
|
|
urtwn_bb_write(sc, R92C_OFDM1_LSTF, reg);
|
|
|
|
urtwn_bb_write(sc, R92C_FPGA0_ANAPARAM2,
|
|
urtwn_bb_read(sc, R92C_FPGA0_ANAPARAM2) &
|
|
~R92C_FPGA0_ANAPARAM2_CBW20);
|
|
|
|
reg = urtwn_bb_read(sc, 0x818);
|
|
reg = (reg & ~0x0c000000) | (prichlo ? 2 : 1) << 26;
|
|
urtwn_bb_write(sc, 0x818, reg);
|
|
|
|
/* Select 40MHz bandwidth. */
|
|
urtwn_rf_write(sc, 0, R92C_RF_CHNLBW,
|
|
(sc->rf_chnlbw[0] & ~0xfff) | chan);
|
|
} else
|
|
#endif
|
|
{
|
|
urtwn_write_1(sc, R92C_BWOPMODE,
|
|
urtwn_read_1(sc, R92C_BWOPMODE) | R92C_BWOPMODE_20MHZ);
|
|
|
|
urtwn_bb_write(sc, R92C_FPGA0_RFMOD,
|
|
urtwn_bb_read(sc, R92C_FPGA0_RFMOD) & ~R92C_RFMOD_40MHZ);
|
|
urtwn_bb_write(sc, R92C_FPGA1_RFMOD,
|
|
urtwn_bb_read(sc, R92C_FPGA1_RFMOD) & ~R92C_RFMOD_40MHZ);
|
|
|
|
if (!(sc->chip & URTWN_CHIP_88E)) {
|
|
urtwn_bb_write(sc, R92C_FPGA0_ANAPARAM2,
|
|
urtwn_bb_read(sc, R92C_FPGA0_ANAPARAM2) |
|
|
R92C_FPGA0_ANAPARAM2_CBW20);
|
|
}
|
|
|
|
/* Select 20MHz bandwidth. */
|
|
urtwn_rf_write(sc, 0, R92C_RF_CHNLBW,
|
|
(sc->rf_chnlbw[0] & ~0xfff) | chan |
|
|
((sc->chip & URTWN_CHIP_88E) ? R88E_RF_CHNLBW_BW20 :
|
|
R92C_RF_CHNLBW_BW20));
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_iq_calib(struct urtwn_softc *sc)
|
|
{
|
|
/* TODO */
|
|
}
|
|
|
|
static void
|
|
urtwn_lc_calib(struct urtwn_softc *sc)
|
|
{
|
|
uint32_t rf_ac[2];
|
|
uint8_t txmode;
|
|
int i;
|
|
|
|
txmode = urtwn_read_1(sc, R92C_OFDM1_LSTF + 3);
|
|
if ((txmode & 0x70) != 0) {
|
|
/* Disable all continuous Tx. */
|
|
urtwn_write_1(sc, R92C_OFDM1_LSTF + 3, txmode & ~0x70);
|
|
|
|
/* Set RF mode to standby mode. */
|
|
for (i = 0; i < sc->nrxchains; i++) {
|
|
rf_ac[i] = urtwn_rf_read(sc, i, R92C_RF_AC);
|
|
urtwn_rf_write(sc, i, R92C_RF_AC,
|
|
RW(rf_ac[i], R92C_RF_AC_MODE,
|
|
R92C_RF_AC_MODE_STANDBY));
|
|
}
|
|
} else {
|
|
/* Block all Tx queues. */
|
|
urtwn_write_1(sc, R92C_TXPAUSE, 0xff);
|
|
}
|
|
/* Start calibration. */
|
|
urtwn_rf_write(sc, 0, R92C_RF_CHNLBW,
|
|
urtwn_rf_read(sc, 0, R92C_RF_CHNLBW) | R92C_RF_CHNLBW_LCSTART);
|
|
|
|
/* Give calibration the time to complete. */
|
|
usb_pause_mtx(&sc->sc_mtx, hz / 10); /* 100ms */
|
|
|
|
/* Restore configuration. */
|
|
if ((txmode & 0x70) != 0) {
|
|
/* Restore Tx mode. */
|
|
urtwn_write_1(sc, R92C_OFDM1_LSTF + 3, txmode);
|
|
/* Restore RF mode. */
|
|
for (i = 0; i < sc->nrxchains; i++)
|
|
urtwn_rf_write(sc, i, R92C_RF_AC, rf_ac[i]);
|
|
} else {
|
|
/* Unblock all Tx queues. */
|
|
urtwn_write_1(sc, R92C_TXPAUSE, 0x00);
|
|
}
|
|
}
|
|
|
|
static void
|
|
urtwn_init(struct urtwn_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
|
|
uint8_t macaddr[IEEE80211_ADDR_LEN];
|
|
uint32_t reg;
|
|
int error;
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
|
|
if (sc->sc_flags & URTWN_RUNNING)
|
|
urtwn_stop(sc);
|
|
|
|
/* Init firmware commands ring. */
|
|
sc->fwcur = 0;
|
|
|
|
/* Allocate Tx/Rx buffers. */
|
|
error = urtwn_alloc_rx_list(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
error = urtwn_alloc_tx_list(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
/* Power on adapter. */
|
|
error = urtwn_power_on(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
/* Initialize DMA. */
|
|
error = urtwn_dma_init(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
/* Set info size in Rx descriptors (in 64-bit words). */
|
|
urtwn_write_1(sc, R92C_RX_DRVINFO_SZ, 4);
|
|
|
|
/* Init interrupts. */
|
|
if (sc->chip & URTWN_CHIP_88E) {
|
|
urtwn_write_4(sc, R88E_HISR, 0xffffffff);
|
|
urtwn_write_4(sc, R88E_HIMR, R88E_HIMR_CPWM | R88E_HIMR_CPWM2 |
|
|
R88E_HIMR_TBDER | R88E_HIMR_PSTIMEOUT);
|
|
urtwn_write_4(sc, R88E_HIMRE, R88E_HIMRE_RXFOVW |
|
|
R88E_HIMRE_TXFOVW | R88E_HIMRE_RXERR | R88E_HIMRE_TXERR);
|
|
urtwn_write_1(sc, R92C_USB_SPECIAL_OPTION,
|
|
urtwn_read_1(sc, R92C_USB_SPECIAL_OPTION) |
|
|
R92C_USB_SPECIAL_OPTION_INT_BULK_SEL);
|
|
} else {
|
|
urtwn_write_4(sc, R92C_HISR, 0xffffffff);
|
|
urtwn_write_4(sc, R92C_HIMR, 0xffffffff);
|
|
}
|
|
|
|
/* Set MAC address. */
|
|
IEEE80211_ADDR_COPY(macaddr, vap ? vap->iv_myaddr : ic->ic_macaddr);
|
|
urtwn_write_region_1(sc, R92C_MACID, macaddr, IEEE80211_ADDR_LEN);
|
|
|
|
/* Set initial network type. */
|
|
urtwn_set_mode(sc, R92C_MSR_INFRA);
|
|
|
|
/* Initialize Rx filter. */
|
|
urtwn_rxfilter_init(sc);
|
|
|
|
/* Set response rate. */
|
|
reg = urtwn_read_4(sc, R92C_RRSR);
|
|
reg = RW(reg, R92C_RRSR_RATE_BITMAP, R92C_RRSR_RATE_CCK_ONLY_1M);
|
|
urtwn_write_4(sc, R92C_RRSR, reg);
|
|
|
|
/* Set short/long retry limits. */
|
|
urtwn_write_2(sc, R92C_RL,
|
|
SM(R92C_RL_SRL, 0x30) | SM(R92C_RL_LRL, 0x30));
|
|
|
|
/* Initialize EDCA parameters. */
|
|
urtwn_edca_init(sc);
|
|
|
|
/* Setup rate fallback. */
|
|
if (!(sc->chip & URTWN_CHIP_88E)) {
|
|
urtwn_write_4(sc, R92C_DARFRC + 0, 0x00000000);
|
|
urtwn_write_4(sc, R92C_DARFRC + 4, 0x10080404);
|
|
urtwn_write_4(sc, R92C_RARFRC + 0, 0x04030201);
|
|
urtwn_write_4(sc, R92C_RARFRC + 4, 0x08070605);
|
|
}
|
|
|
|
urtwn_write_1(sc, R92C_FWHW_TXQ_CTRL,
|
|
urtwn_read_1(sc, R92C_FWHW_TXQ_CTRL) |
|
|
R92C_FWHW_TXQ_CTRL_AMPDU_RTY_NEW);
|
|
/* Set ACK timeout. */
|
|
urtwn_write_1(sc, R92C_ACKTO, 0x40);
|
|
|
|
/* Setup USB aggregation. */
|
|
reg = urtwn_read_4(sc, R92C_TDECTRL);
|
|
reg = RW(reg, R92C_TDECTRL_BLK_DESC_NUM, 6);
|
|
urtwn_write_4(sc, R92C_TDECTRL, reg);
|
|
urtwn_write_1(sc, R92C_TRXDMA_CTRL,
|
|
urtwn_read_1(sc, R92C_TRXDMA_CTRL) |
|
|
R92C_TRXDMA_CTRL_RXDMA_AGG_EN);
|
|
urtwn_write_1(sc, R92C_RXDMA_AGG_PG_TH, 48);
|
|
if (sc->chip & URTWN_CHIP_88E)
|
|
urtwn_write_1(sc, R92C_RXDMA_AGG_PG_TH + 1, 4);
|
|
else {
|
|
urtwn_write_1(sc, R92C_USB_DMA_AGG_TO, 4);
|
|
urtwn_write_1(sc, R92C_USB_SPECIAL_OPTION,
|
|
urtwn_read_1(sc, R92C_USB_SPECIAL_OPTION) |
|
|
R92C_USB_SPECIAL_OPTION_AGG_EN);
|
|
urtwn_write_1(sc, R92C_USB_AGG_TH, 8);
|
|
urtwn_write_1(sc, R92C_USB_AGG_TO, 6);
|
|
}
|
|
|
|
/* Initialize beacon parameters. */
|
|
urtwn_write_2(sc, R92C_BCN_CTRL, 0x1010);
|
|
urtwn_write_2(sc, R92C_TBTT_PROHIBIT, 0x6404);
|
|
urtwn_write_1(sc, R92C_DRVERLYINT, 0x05);
|
|
urtwn_write_1(sc, R92C_BCNDMATIM, 0x02);
|
|
urtwn_write_2(sc, R92C_BCNTCFG, 0x660f);
|
|
|
|
if (!(sc->chip & URTWN_CHIP_88E)) {
|
|
/* Setup AMPDU aggregation. */
|
|
urtwn_write_4(sc, R92C_AGGLEN_LMT, 0x99997631); /* MCS7~0 */
|
|
urtwn_write_1(sc, R92C_AGGR_BREAK_TIME, 0x16);
|
|
urtwn_write_2(sc, R92C_MAX_AGGR_NUM, 0x0708);
|
|
|
|
urtwn_write_1(sc, R92C_BCN_MAX_ERR, 0xff);
|
|
}
|
|
|
|
/* Load 8051 microcode. */
|
|
error = urtwn_load_firmware(sc);
|
|
if (error != 0)
|
|
goto fail;
|
|
|
|
/* Initialize MAC/BB/RF blocks. */
|
|
urtwn_mac_init(sc);
|
|
urtwn_bb_init(sc);
|
|
urtwn_rf_init(sc);
|
|
|
|
/* Reinitialize Rx filter (D3845 is not committed yet). */
|
|
urtwn_rxfilter_init(sc);
|
|
|
|
if (sc->chip & URTWN_CHIP_88E) {
|
|
urtwn_write_2(sc, R92C_CR,
|
|
urtwn_read_2(sc, R92C_CR) | R92C_CR_MACTXEN |
|
|
R92C_CR_MACRXEN);
|
|
}
|
|
|
|
/* Turn CCK and OFDM blocks on. */
|
|
reg = urtwn_bb_read(sc, R92C_FPGA0_RFMOD);
|
|
reg |= R92C_RFMOD_CCK_EN;
|
|
urtwn_bb_write(sc, R92C_FPGA0_RFMOD, reg);
|
|
reg = urtwn_bb_read(sc, R92C_FPGA0_RFMOD);
|
|
reg |= R92C_RFMOD_OFDM_EN;
|
|
urtwn_bb_write(sc, R92C_FPGA0_RFMOD, reg);
|
|
|
|
/* Clear per-station keys table. */
|
|
urtwn_cam_init(sc);
|
|
|
|
/* Enable hardware sequence numbering. */
|
|
urtwn_write_1(sc, R92C_HWSEQ_CTRL, 0xff);
|
|
|
|
/* Perform LO and IQ calibrations. */
|
|
urtwn_iq_calib(sc);
|
|
/* Perform LC calibration. */
|
|
urtwn_lc_calib(sc);
|
|
|
|
/* Fix USB interference issue. */
|
|
if (!(sc->chip & URTWN_CHIP_88E)) {
|
|
urtwn_write_1(sc, 0xfe40, 0xe0);
|
|
urtwn_write_1(sc, 0xfe41, 0x8d);
|
|
urtwn_write_1(sc, 0xfe42, 0x80);
|
|
|
|
urtwn_pa_bias_init(sc);
|
|
}
|
|
|
|
/* Initialize GPIO setting. */
|
|
urtwn_write_1(sc, R92C_GPIO_MUXCFG,
|
|
urtwn_read_1(sc, R92C_GPIO_MUXCFG) & ~R92C_GPIO_MUXCFG_ENBT);
|
|
|
|
/* Fix for lower temperature. */
|
|
if (!(sc->chip & URTWN_CHIP_88E))
|
|
urtwn_write_1(sc, 0x15, 0xe9);
|
|
|
|
usbd_transfer_start(sc->sc_xfer[URTWN_BULK_RX]);
|
|
|
|
sc->sc_flags |= URTWN_RUNNING;
|
|
|
|
callout_reset(&sc->sc_watchdog_ch, hz, urtwn_watchdog, sc);
|
|
fail:
|
|
return;
|
|
}
|
|
|
|
static void
|
|
urtwn_stop(struct urtwn_softc *sc)
|
|
{
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
sc->sc_flags &= ~URTWN_RUNNING;
|
|
callout_stop(&sc->sc_watchdog_ch);
|
|
urtwn_abort_xfers(sc);
|
|
|
|
urtwn_drain_mbufq(sc);
|
|
}
|
|
|
|
static void
|
|
urtwn_abort_xfers(struct urtwn_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
URTWN_ASSERT_LOCKED(sc);
|
|
|
|
/* abort any pending transfers */
|
|
for (i = 0; i < URTWN_N_TRANSFER; i++)
|
|
usbd_transfer_stop(sc->sc_xfer[i]);
|
|
}
|
|
|
|
static int
|
|
urtwn_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
|
|
const struct ieee80211_bpf_params *params)
|
|
{
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
struct urtwn_softc *sc = ic->ic_softc;
|
|
struct urtwn_data *bf;
|
|
int error;
|
|
|
|
/* prevent management frames from being sent if we're not ready */
|
|
URTWN_LOCK(sc);
|
|
if (!(sc->sc_flags & URTWN_RUNNING)) {
|
|
error = ENETDOWN;
|
|
goto end;
|
|
}
|
|
|
|
bf = urtwn_getbuf(sc);
|
|
if (bf == NULL) {
|
|
error = ENOBUFS;
|
|
goto end;
|
|
}
|
|
|
|
if ((error = urtwn_tx_data(sc, ni, m, bf)) != 0) {
|
|
STAILQ_INSERT_HEAD(&sc->sc_tx_inactive, bf, next);
|
|
goto end;
|
|
}
|
|
|
|
sc->sc_txtimer = 5;
|
|
callout_reset(&sc->sc_watchdog_ch, hz, urtwn_watchdog, sc);
|
|
|
|
end:
|
|
if (error != 0)
|
|
m_freem(m);
|
|
|
|
URTWN_UNLOCK(sc);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
urtwn_ms_delay(struct urtwn_softc *sc)
|
|
{
|
|
usb_pause_mtx(&sc->sc_mtx, hz / 1000);
|
|
}
|
|
|
|
static device_method_t urtwn_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, urtwn_match),
|
|
DEVMETHOD(device_attach, urtwn_attach),
|
|
DEVMETHOD(device_detach, urtwn_detach),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t urtwn_driver = {
|
|
"urtwn",
|
|
urtwn_methods,
|
|
sizeof(struct urtwn_softc)
|
|
};
|
|
|
|
static devclass_t urtwn_devclass;
|
|
|
|
DRIVER_MODULE(urtwn, uhub, urtwn_driver, urtwn_devclass, NULL, NULL);
|
|
MODULE_DEPEND(urtwn, usb, 1, 1, 1);
|
|
MODULE_DEPEND(urtwn, wlan, 1, 1, 1);
|
|
MODULE_DEPEND(urtwn, firmware, 1, 1, 1);
|
|
MODULE_VERSION(urtwn, 1);
|