d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
30b1089d33
freebsd-skq/sys/kern/vfs_aio.c
julian 5596676e6c KSE Milestone 2 
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00

2330 lines
55 KiB
C
Raw Blame History

/*
* Copyright (c) 1997 John S. Dyson. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. John S. Dyson's name may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* DISCLAIMER: This code isn't warranted to do anything useful. Anything
* bad that happens because of using this software isn't the responsibility
* of the author. This software is distributed AS-IS.
*
* $FreeBSD$
*/
/*
* This file contains support for the POSIX 1003.1B AIO/LIO facility.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bio.h>
#include <sys/buf.h>
#include <sys/sysproto.h>
#include <sys/filedesc.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/fcntl.h>
#include <sys/file.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/unistd.h>
#include <sys/proc.h>
#include <sys/resourcevar.h>
#include <sys/signalvar.h>
#include <sys/protosw.h>
#include <sys/socketvar.h>
#include <sys/sysctl.h>
#include <sys/vnode.h>
#include <sys/conf.h>
#include <sys/event.h>
#include <vm/vm.h>
#include <vm/vm_extern.h>
#include <vm/pmap.h>
#include <vm/vm_map.h>
#include <vm/vm_zone.h>
#include <sys/aio.h>
#include <machine/limits.h>
#include "opt_vfs_aio.h"
#ifdef VFS_AIO
static long jobrefid;
#define JOBST_NULL 0x0
#define JOBST_JOBQPROC 0x1
#define JOBST_JOBQGLOBAL 0x2
#define JOBST_JOBRUNNING 0x3
#define JOBST_JOBFINISHED 0x4
#define JOBST_JOBQBUF 0x5
#define JOBST_JOBBFINISHED 0x6
#ifndef MAX_AIO_PER_PROC
#define MAX_AIO_PER_PROC 32
#endif
#ifndef MAX_AIO_QUEUE_PER_PROC
#define MAX_AIO_QUEUE_PER_PROC 256 /* Bigger than AIO_LISTIO_MAX */
#endif
#ifndef MAX_AIO_PROCS
#define MAX_AIO_PROCS 32
#endif
#ifndef MAX_AIO_QUEUE
#define MAX_AIO_QUEUE 1024 /* Bigger than AIO_LISTIO_MAX */
#endif
#ifndef TARGET_AIO_PROCS
#define TARGET_AIO_PROCS 4
#endif
#ifndef MAX_BUF_AIO
#define MAX_BUF_AIO 16
#endif
#ifndef AIOD_TIMEOUT_DEFAULT
#define AIOD_TIMEOUT_DEFAULT (10 * hz)
#endif
#ifndef AIOD_LIFETIME_DEFAULT
#define AIOD_LIFETIME_DEFAULT (30 * hz)
#endif
static int max_aio_procs = MAX_AIO_PROCS;
static int num_aio_procs = 0;
static int target_aio_procs = TARGET_AIO_PROCS;
static int max_queue_count = MAX_AIO_QUEUE;
static int num_queue_count = 0;
static int num_buf_aio = 0;
static int num_aio_resv_start = 0;
static int aiod_timeout;
static int aiod_lifetime;
static int max_aio_per_proc = MAX_AIO_PER_PROC;
static int max_aio_queue_per_proc = MAX_AIO_QUEUE_PER_PROC;
static int max_buf_aio = MAX_BUF_AIO;
SYSCTL_NODE(_vfs, OID_AUTO, aio, CTLFLAG_RW, 0, "AIO mgmt");
SYSCTL_INT(_vfs_aio, OID_AUTO, max_aio_per_proc,
CTLFLAG_RW, &max_aio_per_proc, 0, "");
SYSCTL_INT(_vfs_aio, OID_AUTO, max_aio_queue_per_proc,
CTLFLAG_RW, &max_aio_queue_per_proc, 0, "");
SYSCTL_INT(_vfs_aio, OID_AUTO, max_aio_procs,
CTLFLAG_RW, &max_aio_procs, 0, "");
SYSCTL_INT(_vfs_aio, OID_AUTO, num_aio_procs,
CTLFLAG_RD, &num_aio_procs, 0, "");
SYSCTL_INT(_vfs_aio, OID_AUTO, num_queue_count,
CTLFLAG_RD, &num_queue_count, 0, "");
SYSCTL_INT(_vfs_aio, OID_AUTO, max_aio_queue,
CTLFLAG_RW, &max_queue_count, 0, "");
SYSCTL_INT(_vfs_aio, OID_AUTO, target_aio_procs,
CTLFLAG_RW, &target_aio_procs, 0, "");
SYSCTL_INT(_vfs_aio, OID_AUTO, max_buf_aio,
CTLFLAG_RW, &max_buf_aio, 0, "");
SYSCTL_INT(_vfs_aio, OID_AUTO, num_buf_aio,
CTLFLAG_RD, &num_buf_aio, 0, "");
SYSCTL_INT(_vfs_aio, OID_AUTO, aiod_lifetime,
CTLFLAG_RW, &aiod_lifetime, 0, "");
SYSCTL_INT(_vfs_aio, OID_AUTO, aiod_timeout,
CTLFLAG_RW, &aiod_timeout, 0, "");
/*
* AIO process info
*/
#define AIOP_FREE 0x1 /* proc on free queue */
#define AIOP_SCHED 0x2 /* proc explicitly scheduled */
struct aiothreadlist {
int aiothreadflags; /* AIO proc flags */
TAILQ_ENTRY(aiothreadlist) list; /* List of processes */
struct thread *aiothread; /* The AIO thread */
TAILQ_HEAD (,aiocblist) jobtorun; /* suggested job to run */
};
/*
* data-structure for lio signal management
*/
struct aio_liojob {
int lioj_flags;
int lioj_buffer_count;
int lioj_buffer_finished_count;
int lioj_queue_count;
int lioj_queue_finished_count;
struct sigevent lioj_signal; /* signal on all I/O done */
TAILQ_ENTRY (aio_liojob) lioj_list;
struct kaioinfo *lioj_ki;
};
#define LIOJ_SIGNAL 0x1 /* signal on all done (lio) */
#define LIOJ_SIGNAL_POSTED 0x2 /* signal has been posted */
/*
* per process aio data structure
*/
struct kaioinfo {
int kaio_flags; /* per process kaio flags */
int kaio_maxactive_count; /* maximum number of AIOs */
int kaio_active_count; /* number of currently used AIOs */
int kaio_qallowed_count; /* maxiumu size of AIO queue */
int kaio_queue_count; /* size of AIO queue */
int kaio_ballowed_count; /* maximum number of buffers */
int kaio_queue_finished_count; /* number of daemon jobs finished */
int kaio_buffer_count; /* number of physio buffers */
int kaio_buffer_finished_count; /* count of I/O done */
struct proc *kaio_p; /* process that uses this kaio block */
TAILQ_HEAD (,aio_liojob) kaio_liojoblist; /* list of lio jobs */
TAILQ_HEAD (,aiocblist) kaio_jobqueue; /* job queue for process */
TAILQ_HEAD (,aiocblist) kaio_jobdone; /* done queue for process */
TAILQ_HEAD (,aiocblist) kaio_bufqueue; /* buffer job queue for process */
TAILQ_HEAD (,aiocblist) kaio_bufdone; /* buffer done queue for process */
TAILQ_HEAD (,aiocblist) kaio_sockqueue; /* queue for aios waiting on sockets */
};
#define KAIO_RUNDOWN 0x1 /* process is being run down */
#define KAIO_WAKEUP 0x2 /* wakeup process when there is a significant event */
static TAILQ_HEAD(,aiothreadlist) aio_freeproc, aio_activeproc;
static TAILQ_HEAD(,aiocblist) aio_jobs; /* Async job list */
static TAILQ_HEAD(,aiocblist) aio_bufjobs; /* Phys I/O job list */
static void aio_init_aioinfo(struct proc *p);
static void aio_onceonly(void *);
static int aio_free_entry(struct aiocblist *aiocbe);
static void aio_process(struct aiocblist *aiocbe);
static int aio_newproc(void);
static int aio_aqueue(struct thread *td, struct aiocb *job, int type);
static void aio_physwakeup(struct buf *bp);
static int aio_fphysio(struct proc *p, struct aiocblist *aiocbe);
static int aio_qphysio(struct proc *p, struct aiocblist *iocb);
static void aio_daemon(void *uproc);
static void process_signal(void *aioj);
SYSINIT(aio, SI_SUB_VFS, SI_ORDER_ANY, aio_onceonly, NULL);
static vm_zone_t kaio_zone = 0, aiop_zone = 0, aiocb_zone = 0, aiol_zone = 0;
static vm_zone_t aiolio_zone = 0;
/*
* Startup initialization
*/
static void
aio_onceonly(void *na)
{
TAILQ_INIT(&aio_freeproc);
TAILQ_INIT(&aio_activeproc);
TAILQ_INIT(&aio_jobs);
TAILQ_INIT(&aio_bufjobs);
kaio_zone = zinit("AIO", sizeof (struct kaioinfo), 0, 0, 1);
aiop_zone = zinit("AIOP", sizeof (struct aiothreadlist), 0, 0, 1);
aiocb_zone = zinit("AIOCB", sizeof (struct aiocblist), 0, 0, 1);
aiol_zone = zinit("AIOL", AIO_LISTIO_MAX * sizeof (int), 0, 0, 1);
aiolio_zone = zinit("AIOLIO", AIO_LISTIO_MAX * sizeof (struct
aio_liojob), 0, 0, 1);
aiod_timeout = AIOD_TIMEOUT_DEFAULT;
aiod_lifetime = AIOD_LIFETIME_DEFAULT;
jobrefid = 1;
}
/*
* Init the per-process aioinfo structure. The aioinfo limits are set
* per-process for user limit (resource) management.
*/
static void
aio_init_aioinfo(struct proc *p)
{
struct kaioinfo *ki;
if (p->p_aioinfo == NULL) {
ki = zalloc(kaio_zone);
p->p_aioinfo = ki;
ki->kaio_flags = 0;
ki->kaio_maxactive_count = max_aio_per_proc;
ki->kaio_active_count = 0;
ki->kaio_qallowed_count = max_aio_queue_per_proc;
ki->kaio_queue_count = 0;
ki->kaio_ballowed_count = max_buf_aio;
ki->kaio_buffer_count = 0;
ki->kaio_buffer_finished_count = 0;
ki->kaio_p = p;
TAILQ_INIT(&ki->kaio_jobdone);
TAILQ_INIT(&ki->kaio_jobqueue);
TAILQ_INIT(&ki->kaio_bufdone);
TAILQ_INIT(&ki->kaio_bufqueue);
TAILQ_INIT(&ki->kaio_liojoblist);
TAILQ_INIT(&ki->kaio_sockqueue);
}
while (num_aio_procs < target_aio_procs)
aio_newproc();
}
/*
* Free a job entry. Wait for completion if it is currently active, but don't
* delay forever. If we delay, we return a flag that says that we have to
* restart the queue scan.
*/
static int
aio_free_entry(struct aiocblist *aiocbe)
{
struct kaioinfo *ki;
struct aiothreadlist *aiop;
struct aio_liojob *lj;
struct proc *p;
int error;
int s;
if (aiocbe->jobstate == JOBST_NULL)
panic("aio_free_entry: freeing already free job");
p = aiocbe->userproc;
ki = p->p_aioinfo;
lj = aiocbe->lio;
if (ki == NULL)
panic("aio_free_entry: missing p->p_aioinfo");
while (aiocbe->jobstate == JOBST_JOBRUNNING) {
if (aiocbe->jobflags & AIOCBLIST_ASYNCFREE)
return 0;
aiocbe->jobflags |= AIOCBLIST_RUNDOWN;
tsleep(aiocbe, PRIBIO, "jobwai", 0);
}
aiocbe->jobflags &= ~AIOCBLIST_ASYNCFREE;
if (aiocbe->bp == NULL) {
if (ki->kaio_queue_count <= 0)
panic("aio_free_entry: process queue size <= 0");
if (num_queue_count <= 0)
panic("aio_free_entry: system wide queue size <= 0");
if (lj) {
lj->lioj_queue_count--;
if (aiocbe->jobflags & AIOCBLIST_DONE)
lj->lioj_queue_finished_count--;
}
ki->kaio_queue_count--;
if (aiocbe->jobflags & AIOCBLIST_DONE)
ki->kaio_queue_finished_count--;
num_queue_count--;
} else {
if (lj) {
lj->lioj_buffer_count--;
if (aiocbe->jobflags & AIOCBLIST_DONE)
lj->lioj_buffer_finished_count--;
}
if (aiocbe->jobflags & AIOCBLIST_DONE)
ki->kaio_buffer_finished_count--;
ki->kaio_buffer_count--;
num_buf_aio--;
}
/* aiocbe is going away, we need to destroy any knotes */
knote_remove(&p->p_thread, &aiocbe->klist); /* XXXKSE */
/* XXXKSE Note the thread here is used to eventually find the
* owning process again, but it is also used to do a fo_close
* and that requires the thread. (but does it require the
* OWNING thread? (or maby the running thread?)
* There is a semantic problem here...
*/
if ((ki->kaio_flags & KAIO_WAKEUP) || ((ki->kaio_flags & KAIO_RUNDOWN)
&& ((ki->kaio_buffer_count == 0) && (ki->kaio_queue_count == 0)))) {
ki->kaio_flags &= ~KAIO_WAKEUP;
wakeup(p);
}
if (aiocbe->jobstate == JOBST_JOBQBUF) {
if ((error = aio_fphysio(p, aiocbe)) != 0)
return error;
if (aiocbe->jobstate != JOBST_JOBBFINISHED)
panic("aio_free_entry: invalid physio finish-up state");
s = splbio();
TAILQ_REMOVE(&ki->kaio_bufdone, aiocbe, plist);
splx(s);
} else if (aiocbe->jobstate == JOBST_JOBQPROC) {
aiop = aiocbe->jobaiothread;
TAILQ_REMOVE(&aiop->jobtorun, aiocbe, list);
} else if (aiocbe->jobstate == JOBST_JOBQGLOBAL) {
TAILQ_REMOVE(&aio_jobs, aiocbe, list);
TAILQ_REMOVE(&ki->kaio_jobqueue, aiocbe, plist);
} else if (aiocbe->jobstate == JOBST_JOBFINISHED)
TAILQ_REMOVE(&ki->kaio_jobdone, aiocbe, plist);
else if (aiocbe->jobstate == JOBST_JOBBFINISHED) {
s = splbio();
TAILQ_REMOVE(&ki->kaio_bufdone, aiocbe, plist);
splx(s);
if (aiocbe->bp) {
vunmapbuf(aiocbe->bp);
relpbuf(aiocbe->bp, NULL);
aiocbe->bp = NULL;
}
}
if (lj && (lj->lioj_buffer_count == 0) && (lj->lioj_queue_count == 0)) {
TAILQ_REMOVE(&ki->kaio_liojoblist, lj, lioj_list);
zfree(aiolio_zone, lj);
}
aiocbe->jobstate = JOBST_NULL;
untimeout(process_signal, aiocbe, aiocbe->timeouthandle);
zfree(aiocb_zone, aiocbe);
return 0;
}
#endif /* VFS_AIO */
/*
* Rundown the jobs for a given process.
*/
void
aio_proc_rundown(struct proc *p)
{
#ifndef VFS_AIO
return;
#else
int s;
struct kaioinfo *ki;
struct aio_liojob *lj, *ljn;
struct aiocblist *aiocbe, *aiocbn;
struct file *fp;
struct filedesc *fdp;
struct socket *so;
ki = p->p_aioinfo;
if (ki == NULL)
return;
ki->kaio_flags |= LIOJ_SIGNAL_POSTED;
while ((ki->kaio_active_count > 0) || (ki->kaio_buffer_count >
ki->kaio_buffer_finished_count)) {
ki->kaio_flags |= KAIO_RUNDOWN;
if (tsleep(p, PRIBIO, "kaiowt", aiod_timeout))
break;
}
/*
* Move any aio ops that are waiting on socket I/O to the normal job
* queues so they are cleaned up with any others.
*/
fdp = p->p_fd;
s = splnet();
for (aiocbe = TAILQ_FIRST(&ki->kaio_sockqueue); aiocbe; aiocbe =
aiocbn) {
aiocbn = TAILQ_NEXT(aiocbe, plist);
fp = fdp->fd_ofiles[aiocbe->uaiocb.aio_fildes];
/*
* Under some circumstances, the aio_fildes and the file
* structure don't match. This would leave aiocbe's in the
* TAILQ associated with the socket and cause a panic later.
*
* Detect and fix.
*/
if ((fp == NULL) || (fp != aiocbe->fd_file))
fp = aiocbe->fd_file;
if (fp) {
so = (struct socket *)fp->f_data;
TAILQ_REMOVE(&so->so_aiojobq, aiocbe, list);
if (TAILQ_EMPTY(&so->so_aiojobq)) {
so->so_snd.sb_flags &= ~SB_AIO;
so->so_rcv.sb_flags &= ~SB_AIO;
}
}
TAILQ_REMOVE(&ki->kaio_sockqueue, aiocbe, plist);
TAILQ_INSERT_HEAD(&aio_jobs, aiocbe, list);
TAILQ_INSERT_HEAD(&ki->kaio_jobqueue, aiocbe, plist);
}
splx(s);
restart1:
for (aiocbe = TAILQ_FIRST(&ki->kaio_jobdone); aiocbe; aiocbe = aiocbn) {
aiocbn = TAILQ_NEXT(aiocbe, plist);
if (aio_free_entry(aiocbe))
goto restart1;
}
restart2:
for (aiocbe = TAILQ_FIRST(&ki->kaio_jobqueue); aiocbe; aiocbe =
aiocbn) {
aiocbn = TAILQ_NEXT(aiocbe, plist);
if (aio_free_entry(aiocbe))
goto restart2;
}
/*
* Note the use of lots of splbio here, trying to avoid splbio for long chains
* of I/O. Probably unnecessary.
*/
restart3:
s = splbio();
while (TAILQ_FIRST(&ki->kaio_bufqueue)) {
ki->kaio_flags |= KAIO_WAKEUP;
tsleep(p, PRIBIO, "aioprn", 0);
splx(s);
goto restart3;
}
splx(s);
restart4:
s = splbio();
for (aiocbe = TAILQ_FIRST(&ki->kaio_bufdone); aiocbe; aiocbe = aiocbn) {
aiocbn = TAILQ_NEXT(aiocbe, plist);
if (aio_free_entry(aiocbe)) {
splx(s);
goto restart4;
}
}
splx(s);
/*
* If we've slept, jobs might have moved from one queue to another.
* Retry rundown if we didn't manage to empty the queues.
*/
if (TAILQ_FIRST(&ki->kaio_jobdone) != NULL ||
TAILQ_FIRST(&ki->kaio_jobqueue) != NULL ||
TAILQ_FIRST(&ki->kaio_bufqueue) != NULL ||
TAILQ_FIRST(&ki->kaio_bufdone) != NULL)
goto restart1;
for (lj = TAILQ_FIRST(&ki->kaio_liojoblist); lj; lj = ljn) {
ljn = TAILQ_NEXT(lj, lioj_list);
if ((lj->lioj_buffer_count == 0) && (lj->lioj_queue_count ==
0)) {
TAILQ_REMOVE(&ki->kaio_liojoblist, lj, lioj_list);
zfree(aiolio_zone, lj);
} else {
#ifdef DIAGNOSTIC
printf("LIO job not cleaned up: B:%d, BF:%d, Q:%d, "
"QF:%d\n", lj->lioj_buffer_count,
lj->lioj_buffer_finished_count,
lj->lioj_queue_count,
lj->lioj_queue_finished_count);
#endif
}
}
zfree(kaio_zone, ki);
p->p_aioinfo = NULL;
#endif /* VFS_AIO */
}
#ifdef VFS_AIO
/*
* Select a job to run (called by an AIO daemon).
*/
static struct aiocblist *
aio_selectjob(struct aiothreadlist *aiop)
{
int s;
struct aiocblist *aiocbe;
struct kaioinfo *ki;
struct proc *userp;
aiocbe = TAILQ_FIRST(&aiop->jobtorun);
if (aiocbe) {
TAILQ_REMOVE(&aiop->jobtorun, aiocbe, list);
return aiocbe;
}
s = splnet();
for (aiocbe = TAILQ_FIRST(&aio_jobs); aiocbe; aiocbe =
TAILQ_NEXT(aiocbe, list)) {
userp = aiocbe->userproc;
ki = userp->p_aioinfo;
if (ki->kaio_active_count < ki->kaio_maxactive_count) {
TAILQ_REMOVE(&aio_jobs, aiocbe, list);
splx(s);
return aiocbe;
}
}
splx(s);
return NULL;
}
/*
* The AIO processing activity. This is the code that does the I/O request for
* the non-physio version of the operations. The normal vn operations are used,
* and this code should work in all instances for every type of file, including
* pipes, sockets, fifos, and regular files.
*/
static void
aio_process(struct aiocblist *aiocbe)
{
struct filedesc *fdp;
struct thread *td;
struct proc *userp;
struct proc *mycp;
struct aiocb *cb;
struct file *fp;
struct uio auio;
struct iovec aiov;
unsigned int fd;
int cnt;
int error;
off_t offset;
int oublock_st, oublock_end;
int inblock_st, inblock_end;
userp = aiocbe->userproc;
td = curthread;
mycp = td->td_proc;
cb = &aiocbe->uaiocb;
fdp = mycp->p_fd;
fd = cb->aio_fildes;
fp = fdp->fd_ofiles[fd];
if ((fp == NULL) || (fp != aiocbe->fd_file)) {
cb->_aiocb_private.error = EBADF;
cb->_aiocb_private.status = -1;
return;
}
aiov.iov_base = cb->aio_buf;
aiov.iov_len = cb->aio_nbytes;
auio.uio_iov = &aiov;
auio.uio_iovcnt = 1;
auio.uio_offset = offset = cb->aio_offset;
auio.uio_resid = cb->aio_nbytes;
cnt = cb->aio_nbytes;
auio.uio_segflg = UIO_USERSPACE;
auio.uio_td = td;
inblock_st = mycp->p_stats->p_ru.ru_inblock;
oublock_st = mycp->p_stats->p_ru.ru_oublock;
/*
* Temporarily bump the ref count while reading to avoid the
* descriptor being ripped out from under us.
*/
fhold(fp);
if (cb->aio_lio_opcode == LIO_READ) {
auio.uio_rw = UIO_READ;
error = fo_read(fp, &auio, fp->f_cred, FOF_OFFSET, td);
} else {
auio.uio_rw = UIO_WRITE;
error = fo_write(fp, &auio, fp->f_cred, FOF_OFFSET, td);
}
fdrop(fp, td);
inblock_end = mycp->p_stats->p_ru.ru_inblock;
oublock_end = mycp->p_stats->p_ru.ru_oublock;
aiocbe->inputcharge = inblock_end - inblock_st;
aiocbe->outputcharge = oublock_end - oublock_st;
if ((error) && (auio.uio_resid != cnt)) {
if (error == ERESTART || error == EINTR || error == EWOULDBLOCK)
error = 0;
if ((error == EPIPE) && (cb->aio_lio_opcode == LIO_WRITE)) {
PROC_LOCK(userp);
psignal(userp, SIGPIPE);
PROC_UNLOCK(userp);
}
}
cnt -= auio.uio_resid;
cb->_aiocb_private.error = error;
cb->_aiocb_private.status = cnt;
}
/*
* The AIO daemon, most of the actual work is done in aio_process,
* but the setup (and address space mgmt) is done in this routine.
*/
static void
aio_daemon(void *uproc)
{
int s;
struct aio_liojob *lj;
struct aiocb *cb;
struct aiocblist *aiocbe;
struct aiothreadlist *aiop;
struct kaioinfo *ki;
struct proc *curcp, *mycp, *userp;
struct vmspace *myvm, *tmpvm;
struct thread *td = curthread;
mtx_lock(&Giant);
/*
* Local copies of curproc (cp) and vmspace (myvm)
*/
mycp = td->td_proc;
myvm = mycp->p_vmspace;
if (mycp->p_textvp) {
vrele(mycp->p_textvp);
mycp->p_textvp = NULL;
}
/*
* Allocate and ready the aio control info. There is one aiop structure
* per daemon.
*/
aiop = zalloc(aiop_zone);
aiop->aiothread = td;
aiop->aiothreadflags |= AIOP_FREE;
TAILQ_INIT(&aiop->jobtorun);
s = splnet();
/*
* Place thread (lightweight process) onto the AIO free thread list.
*/
if (TAILQ_EMPTY(&aio_freeproc))
wakeup(&aio_freeproc);
TAILQ_INSERT_HEAD(&aio_freeproc, aiop, list);
splx(s);
/*
* Get rid of our current filedescriptors. AIOD's don't need any
* filedescriptors, except as temporarily inherited from the client.
* Credentials are also cloned, and made equivalent to "root".
*/
fdfree(td);
mycp->p_fd = NULL;
mycp->p_ucred = crcopy(mycp->p_ucred);
mycp->p_ucred->cr_uid = 0;
uifree(mycp->p_ucred->cr_uidinfo);
mycp->p_ucred->cr_uidinfo = uifind(0);
mycp->p_ucred->cr_ngroups = 1;
mycp->p_ucred->cr_groups[0] = 1;
/* The daemon resides in its own pgrp. */
enterpgrp(mycp, mycp->p_pid, 1);
/* Mark special process type. */
mycp->p_flag |= P_SYSTEM;
/*
* Wakeup parent process. (Parent sleeps to keep from blasting away
* and creating too many daemons.)
*/
wakeup(mycp);
for (;;) {
/*
* curcp is the current daemon process context.
* userp is the current user process context.
*/
curcp = mycp;
/*
* Take daemon off of free queue
*/
if (aiop->aiothreadflags & AIOP_FREE) {
s = splnet();
TAILQ_REMOVE(&aio_freeproc, aiop, list);
TAILQ_INSERT_TAIL(&aio_activeproc, aiop, list);
aiop->aiothreadflags &= ~AIOP_FREE;
splx(s);
}
aiop->aiothreadflags &= ~AIOP_SCHED;
/*
* Check for jobs.
*/
while ((aiocbe = aio_selectjob(aiop)) != NULL) {
cb = &aiocbe->uaiocb;
userp = aiocbe->userproc;
aiocbe->jobstate = JOBST_JOBRUNNING;
/*
* Connect to process address space for user program.
*/
if (userp != curcp) {
/*
* Save the current address space that we are
* connected to.
*/
tmpvm = mycp->p_vmspace;
/*
* Point to the new user address space, and
* refer to it.
*/
mycp->p_vmspace = userp->p_vmspace;
mycp->p_vmspace->vm_refcnt++;
/* Activate the new mapping. */
pmap_activate(&mycp->p_thread);
/*
* If the old address space wasn't the daemons
* own address space, then we need to remove the
* daemon's reference from the other process
* that it was acting on behalf of.
*/
if (tmpvm != myvm) {
vmspace_free(tmpvm);
}
/*
* Disassociate from previous clients file
* descriptors, and associate to the new clients
* descriptors. Note that the daemon doesn't
* need to worry about its orginal descriptors,
* because they were originally freed.
*/
if (mycp->p_fd)
fdfree(td);
mycp->p_fd = fdshare(userp);
curcp = userp;
}
ki = userp->p_aioinfo;
lj = aiocbe->lio;
/* Account for currently active jobs. */
ki->kaio_active_count++;
/* Do the I/O function. */
aiocbe->jobaiothread = aiop;
aio_process(aiocbe);
/* Decrement the active job count. */
ki->kaio_active_count--;
/*
* Increment the completion count for wakeup/signal
* comparisons.
*/
aiocbe->jobflags |= AIOCBLIST_DONE;
ki->kaio_queue_finished_count++;
if (lj)
lj->lioj_queue_finished_count++;
if ((ki->kaio_flags & KAIO_WAKEUP) || ((ki->kaio_flags
& KAIO_RUNDOWN) && (ki->kaio_active_count == 0))) {
ki->kaio_flags &= ~KAIO_WAKEUP;
wakeup(userp);
}
s = splbio();
if (lj && (lj->lioj_flags &
(LIOJ_SIGNAL|LIOJ_SIGNAL_POSTED)) == LIOJ_SIGNAL) {
if ((lj->lioj_queue_finished_count ==
lj->lioj_queue_count) &&
(lj->lioj_buffer_finished_count ==
lj->lioj_buffer_count)) {
PROC_LOCK(userp);
psignal(userp,
lj->lioj_signal.sigev_signo);
PROC_UNLOCK(userp);
lj->lioj_flags |= LIOJ_SIGNAL_POSTED;
}
}
splx(s);
aiocbe->jobstate = JOBST_JOBFINISHED;
/*
* If the I/O request should be automatically rundown,
* do the needed cleanup. Otherwise, place the queue
* entry for the just finished I/O request into the done
* queue for the associated client.
*/
s = splnet();
if (aiocbe->jobflags & AIOCBLIST_ASYNCFREE) {
aiocbe->jobflags &= ~AIOCBLIST_ASYNCFREE;
zfree(aiocb_zone, aiocbe);
} else {
TAILQ_REMOVE(&ki->kaio_jobqueue, aiocbe, plist);
TAILQ_INSERT_TAIL(&ki->kaio_jobdone, aiocbe,
plist);
}
splx(s);
KNOTE(&aiocbe->klist, 0);
if (aiocbe->jobflags & AIOCBLIST_RUNDOWN) {
wakeup(aiocbe);
aiocbe->jobflags &= ~AIOCBLIST_RUNDOWN;
}
if (cb->aio_sigevent.sigev_notify == SIGEV_SIGNAL) {
PROC_LOCK(userp);
psignal(userp, cb->aio_sigevent.sigev_signo);
PROC_UNLOCK(userp);
}
}
/*
* Disconnect from user address space.
*/
if (curcp != mycp) {
/* Get the user address space to disconnect from. */
tmpvm = mycp->p_vmspace;
/* Get original address space for daemon. */
mycp->p_vmspace = myvm;
/* Activate the daemon's address space. */
pmap_activate(&mycp->p_thread);
#ifdef DIAGNOSTIC
if (tmpvm == myvm) {
printf("AIOD: vmspace problem -- %d\n",
mycp->p_pid);
}
#endif
/* Remove our vmspace reference. */
vmspace_free(tmpvm);
/*
* Disassociate from the user process's file
* descriptors.
*/
if (mycp->p_fd)
fdfree(td);
mycp->p_fd = NULL;
curcp = mycp;
}
/*
* If we are the first to be put onto the free queue, wakeup
* anyone waiting for a daemon.
*/
s = splnet();
TAILQ_REMOVE(&aio_activeproc, aiop, list);
if (TAILQ_EMPTY(&aio_freeproc))
wakeup(&aio_freeproc);
TAILQ_INSERT_HEAD(&aio_freeproc, aiop, list);
aiop->aiothreadflags |= AIOP_FREE;
splx(s);
/*
* If daemon is inactive for a long time, allow it to exit,
* thereby freeing resources.
*/
if (((aiop->aiothreadflags & AIOP_SCHED) == 0) && tsleep(mycp,
PRIBIO, "aiordy", aiod_lifetime)) {
s = splnet();
if ((TAILQ_FIRST(&aio_jobs) == NULL) &&
(TAILQ_FIRST(&aiop->jobtorun) == NULL)) {
if ((aiop->aiothreadflags & AIOP_FREE) &&
(num_aio_procs > target_aio_procs)) {
TAILQ_REMOVE(&aio_freeproc, aiop, list);
splx(s);
zfree(aiop_zone, aiop);
num_aio_procs--;
#ifdef DIAGNOSTIC
if (mycp->p_vmspace->vm_refcnt <= 1) {
printf("AIOD: bad vm refcnt for"
" exiting daemon: %d\n",
mycp->p_vmspace->vm_refcnt);
}
#endif
kthread_exit(0);
}
}
splx(s);
}
}
}
/*
* Create a new AIO daemon. This is mostly a kernel-thread fork routine. The
* AIO daemon modifies its environment itself.
*/
static int
aio_newproc()
{
int error;
struct proc *p;
error = kthread_create(aio_daemon, curproc, &p, RFNOWAIT, "aiod%d",
num_aio_procs);
if (error)
return error;
/*
* Wait until daemon is started, but continue on just in case to
* handle error conditions.
*/
error = tsleep(p, PZERO, "aiosta", aiod_timeout);
num_aio_procs++;
return error;
}
/*
* Try the high-performance, low-overhead physio method for eligible
* VCHR devices. This method doesn't use an aio helper thread, and
* thus has very low overhead.
*
* Assumes that the caller, _aio_aqueue(), has incremented the file
* structure's reference count, preventing its deallocation for the
* duration of this call.
*/
static int
aio_qphysio(struct proc *p, struct aiocblist *aiocbe)
{
int error;
struct aiocb *cb;
struct file *fp;
struct buf *bp;
struct vnode *vp;
struct kaioinfo *ki;
struct filedesc *fdp;
struct aio_liojob *lj;
int fd;
int s;
int notify;
cb = &aiocbe->uaiocb;
fdp = p->p_fd;
fd = cb->aio_fildes;
fp = fdp->fd_ofiles[fd];
if (fp->f_type != DTYPE_VNODE)
return (-1);
vp = (struct vnode *)fp->f_data;
/*
* If its not a disk, we don't want to return a positive error.
* It causes the aio code to not fall through to try the thread
* way when you're talking to a regular file.
*/
if (!vn_isdisk(vp, &error)) {
if (error == ENOTBLK)
return (-1);
else
return (error);
}
if (cb->aio_nbytes % vp->v_rdev->si_bsize_phys)
return (-1);
if (cb->aio_nbytes >
MAXPHYS - (((vm_offset_t) cb->aio_buf) & PAGE_MASK))
return (-1);
ki = p->p_aioinfo;
if (ki->kaio_buffer_count >= ki->kaio_ballowed_count)
return (-1);
ki->kaio_buffer_count++;
lj = aiocbe->lio;
if (lj)
lj->lioj_buffer_count++;
/* Create and build a buffer header for a transfer. */
bp = (struct buf *)getpbuf(NULL);
BUF_KERNPROC(bp);
/*
* Get a copy of the kva from the physical buffer.
*/
bp->b_caller1 = p;
bp->b_dev = vp->v_rdev;
error = bp->b_error = 0;
bp->b_bcount = cb->aio_nbytes;
bp->b_bufsize = cb->aio_nbytes;
bp->b_flags = B_PHYS;
bp->b_iodone = aio_physwakeup;
bp->b_saveaddr = bp->b_data;
bp->b_data = cb->aio_buf;
bp->b_blkno = btodb(cb->aio_offset);
if (cb->aio_lio_opcode == LIO_WRITE) {
bp->b_iocmd = BIO_WRITE;
if (!useracc(bp->b_data, bp->b_bufsize, VM_PROT_READ)) {
error = EFAULT;
goto doerror;
}
} else {
bp->b_iocmd = BIO_READ;
if (!useracc(bp->b_data, bp->b_bufsize, VM_PROT_WRITE)) {
error = EFAULT;
goto doerror;
}
}
/* Bring buffer into kernel space. */
vmapbuf(bp);
s = splbio();
aiocbe->bp = bp;
bp->b_spc = (void *)aiocbe;
TAILQ_INSERT_TAIL(&aio_bufjobs, aiocbe, list);
TAILQ_INSERT_TAIL(&ki->kaio_bufqueue, aiocbe, plist);
aiocbe->jobstate = JOBST_JOBQBUF;
cb->_aiocb_private.status = cb->aio_nbytes;
num_buf_aio++;
bp->b_error = 0;
splx(s);
/* Perform transfer. */
DEV_STRATEGY(bp, 0);
notify = 0;
s = splbio();
/*
* If we had an error invoking the request, or an error in processing
* the request before we have returned, we process it as an error in
* transfer. Note that such an I/O error is not indicated immediately,
* but is returned using the aio_error mechanism. In this case,
* aio_suspend will return immediately.
*/
if (bp->b_error || (bp->b_ioflags & BIO_ERROR)) {
struct aiocb *job = aiocbe->uuaiocb;
aiocbe->uaiocb._aiocb_private.status = 0;
suword(&job->_aiocb_private.status, 0);
aiocbe->uaiocb._aiocb_private.error = bp->b_error;
suword(&job->_aiocb_private.error, bp->b_error);
ki->kaio_buffer_finished_count++;
if (aiocbe->jobstate != JOBST_JOBBFINISHED) {
aiocbe->jobstate = JOBST_JOBBFINISHED;
aiocbe->jobflags |= AIOCBLIST_DONE;
TAILQ_REMOVE(&aio_bufjobs, aiocbe, list);
TAILQ_REMOVE(&ki->kaio_bufqueue, aiocbe, plist);
TAILQ_INSERT_TAIL(&ki->kaio_bufdone, aiocbe, plist);
notify = 1;
}
}
splx(s);
if (notify)
KNOTE(&aiocbe->klist, 0);
return 0;
doerror:
ki->kaio_buffer_count--;
if (lj)
lj->lioj_buffer_count--;
aiocbe->bp = NULL;
relpbuf(bp, NULL);
return error;
}
/*
* This waits/tests physio completion.
*/
static int
aio_fphysio(struct proc *p, struct aiocblist *iocb)
{
int s;
struct buf *bp;
int error;
bp = iocb->bp;
s = splbio();
while ((bp->b_flags & B_DONE) == 0) {
if (tsleep(bp, PRIBIO, "physstr", aiod_timeout)) {
if ((bp->b_flags & B_DONE) == 0) {
splx(s);
return EINPROGRESS;
} else
break;
}
}
splx(s);
/* Release mapping into kernel space. */
vunmapbuf(bp);
iocb->bp = 0;
error = 0;
/* Check for an error. */
if (bp->b_ioflags & BIO_ERROR)
error = bp->b_error;
relpbuf(bp, NULL);
return (error);
}
#endif /* VFS_AIO */
/*
* Wake up aio requests that may be serviceable now.
*/
void
aio_swake(struct socket *so, struct sockbuf *sb)
{
#ifndef VFS_AIO
return;
#else
struct aiocblist *cb,*cbn;
struct proc *p;
struct kaioinfo *ki = NULL;
int opcode, wakecount = 0;
struct aiothreadlist *aiop;
if (sb == &so->so_snd) {
opcode = LIO_WRITE;
so->so_snd.sb_flags &= ~SB_AIO;
} else {
opcode = LIO_READ;
so->so_rcv.sb_flags &= ~SB_AIO;
}
for (cb = TAILQ_FIRST(&so->so_aiojobq); cb; cb = cbn) {
cbn = TAILQ_NEXT(cb, list);
if (opcode == cb->uaiocb.aio_lio_opcode) {
p = cb->userproc;
ki = p->p_aioinfo;
TAILQ_REMOVE(&so->so_aiojobq, cb, list);
TAILQ_REMOVE(&ki->kaio_sockqueue, cb, plist);
TAILQ_INSERT_TAIL(&aio_jobs, cb, list);
TAILQ_INSERT_TAIL(&ki->kaio_jobqueue, cb, plist);
wakecount++;
if (cb->jobstate != JOBST_JOBQGLOBAL)
panic("invalid queue value");
}
}
while (wakecount--) {
if ((aiop = TAILQ_FIRST(&aio_freeproc)) != 0) {
TAILQ_REMOVE(&aio_freeproc, aiop, list);
TAILQ_INSERT_TAIL(&aio_activeproc, aiop, list);
aiop->aiothreadflags &= ~AIOP_FREE;
wakeup(aiop->aiothread);
}
}
#endif /* VFS_AIO */
}
#ifdef VFS_AIO
/*
* Queue a new AIO request. Choosing either the threaded or direct physio VCHR
* technique is done in this code.
*/
static int
_aio_aqueue(struct thread *td, struct aiocb *job, struct aio_liojob *lj, int type)
{
struct proc *p = td->td_proc;
struct filedesc *fdp;
struct file *fp;
unsigned int fd;
struct socket *so;
int s;
int error;
int opcode;
struct aiocblist *aiocbe;
struct aiothreadlist *aiop;
struct kaioinfo *ki;
struct kevent kev;
struct kqueue *kq;
struct file *kq_fp;
aiocbe = zalloc(aiocb_zone);
aiocbe->inputcharge = 0;
aiocbe->outputcharge = 0;
callout_handle_init(&aiocbe->timeouthandle);
SLIST_INIT(&aiocbe->klist);
suword(&job->_aiocb_private.status, -1);
suword(&job->_aiocb_private.error, 0);
suword(&job->_aiocb_private.kernelinfo, -1);
error = copyin(job, &aiocbe->uaiocb, sizeof(aiocbe->uaiocb));
if (error) {
suword(&job->_aiocb_private.error, error);
zfree(aiocb_zone, aiocbe);
return error;
}
if (aiocbe->uaiocb.aio_sigevent.sigev_notify == SIGEV_SIGNAL &&
!_SIG_VALID(aiocbe->uaiocb.aio_sigevent.sigev_signo)) {
zfree(aiocb_zone, aiocbe);
return EINVAL;
}
/* Save userspace address of the job info. */
aiocbe->uuaiocb = job;
/* Get the opcode. */
if (type != LIO_NOP)
aiocbe->uaiocb.aio_lio_opcode = type;
opcode = aiocbe->uaiocb.aio_lio_opcode;
/* Get the fd info for process. */
fdp = p->p_fd;
/*
* Range check file descriptor.
*/
fd = aiocbe->uaiocb.aio_fildes;
if (fd >= fdp->fd_nfiles) {
zfree(aiocb_zone, aiocbe);
if (type == 0)
suword(&job->_aiocb_private.error, EBADF);
return EBADF;
}
fp = aiocbe->fd_file = fdp->fd_ofiles[fd];
if ((fp == NULL) || ((opcode == LIO_WRITE) && ((fp->f_flag & FWRITE) ==
0))) {
zfree(aiocb_zone, aiocbe);
if (type == 0)
suword(&job->_aiocb_private.error, EBADF);
return EBADF;
}
if (aiocbe->uaiocb.aio_offset == -1LL) {
zfree(aiocb_zone, aiocbe);
if (type == 0)
suword(&job->_aiocb_private.error, EINVAL);
return EINVAL;
}
error = suword(&job->_aiocb_private.kernelinfo, jobrefid);
if (error) {
zfree(aiocb_zone, aiocbe);
if (type == 0)
suword(&job->_aiocb_private.error, EINVAL);
return error;
}
aiocbe->uaiocb._aiocb_private.kernelinfo = (void *)(intptr_t)jobrefid;
if (jobrefid == LONG_MAX)
jobrefid = 1;
else
jobrefid++;
if (opcode == LIO_NOP) {
zfree(aiocb_zone, aiocbe);
if (type == 0) {
suword(&job->_aiocb_private.error, 0);
suword(&job->_aiocb_private.status, 0);
suword(&job->_aiocb_private.kernelinfo, 0);
}
return 0;
}
if ((opcode != LIO_READ) && (opcode != LIO_WRITE)) {
zfree(aiocb_zone, aiocbe);
if (type == 0) {
suword(&job->_aiocb_private.status, 0);
suword(&job->_aiocb_private.error, EINVAL);
}
return EINVAL;
}
fhold(fp);
if (aiocbe->uaiocb.aio_sigevent.sigev_notify == SIGEV_KEVENT) {
kev.ident = aiocbe->uaiocb.aio_sigevent.sigev_notify_kqueue;
kev.udata = aiocbe->uaiocb.aio_sigevent.sigev_value.sigval_ptr;
}
else {
/*
* This method for requesting kevent-based notification won't
* work on the alpha, since we're passing in a pointer
* via aio_lio_opcode, which is an int. Use the SIGEV_KEVENT-
* based method instead.
*/
struct kevent *kevp;
kevp = (struct kevent *)job->aio_lio_opcode;
if (kevp == NULL)
goto no_kqueue;
error = copyin(kevp, &kev, sizeof(kev));
if (error)
goto aqueue_fail;
}
if ((u_int)kev.ident >= fdp->fd_nfiles ||
(kq_fp = fdp->fd_ofiles[kev.ident]) == NULL ||
(kq_fp->f_type != DTYPE_KQUEUE)) {
error = EBADF;
goto aqueue_fail;
}
kq = (struct kqueue *)kq_fp->f_data;
kev.ident = (uintptr_t)aiocbe;
kev.filter = EVFILT_AIO;
kev.flags = EV_ADD | EV_ENABLE | EV_FLAG1;
error = kqueue_register(kq, &kev, td);
aqueue_fail:
if (error) {
zfree(aiocb_zone, aiocbe);
if (type == 0)
suword(&job->_aiocb_private.error, error);
goto done;
}
no_kqueue:
suword(&job->_aiocb_private.error, EINPROGRESS);
aiocbe->uaiocb._aiocb_private.error = EINPROGRESS;
aiocbe->userproc = p;
aiocbe->jobflags = 0;
aiocbe->lio = lj;
ki = p->p_aioinfo;
if (fp->f_type == DTYPE_SOCKET) {
/*
* Alternate queueing for socket ops: Reach down into the
* descriptor to get the socket data. Then check to see if the
* socket is ready to be read or written (based on the requested
* operation).
*
* If it is not ready for io, then queue the aiocbe on the
* socket, and set the flags so we get a call when sbnotify()
* happens.
*/
so = (struct socket *)fp->f_data;
s = splnet();
if (((opcode == LIO_READ) && (!soreadable(so))) || ((opcode ==
LIO_WRITE) && (!sowriteable(so)))) {
TAILQ_INSERT_TAIL(&so->so_aiojobq, aiocbe, list);
TAILQ_INSERT_TAIL(&ki->kaio_sockqueue, aiocbe, plist);
if (opcode == LIO_READ)
so->so_rcv.sb_flags |= SB_AIO;
else
so->so_snd.sb_flags |= SB_AIO;
aiocbe->jobstate = JOBST_JOBQGLOBAL; /* XXX */
ki->kaio_queue_count++;
num_queue_count++;
splx(s);
error = 0;
goto done;
}
splx(s);
}
if ((error = aio_qphysio(p, aiocbe)) == 0)
goto done;
if (error > 0) {
suword(&job->_aiocb_private.status, 0);
aiocbe->uaiocb._aiocb_private.error = error;
suword(&job->_aiocb_private.error, error);
goto done;
}
/* No buffer for daemon I/O. */
aiocbe->bp = NULL;
ki->kaio_queue_count++;
if (lj)
lj->lioj_queue_count++;
s = splnet();
TAILQ_INSERT_TAIL(&ki->kaio_jobqueue, aiocbe, plist);
TAILQ_INSERT_TAIL(&aio_jobs, aiocbe, list);
splx(s);
aiocbe->jobstate = JOBST_JOBQGLOBAL;
num_queue_count++;
error = 0;
/*
* If we don't have a free AIO process, and we are below our quota, then
* start one. Otherwise, depend on the subsequent I/O completions to
* pick-up this job. If we don't sucessfully create the new process
* (thread) due to resource issues, we return an error for now (EAGAIN),
* which is likely not the correct thing to do.
*/
retryproc:
s = splnet();
if ((aiop = TAILQ_FIRST(&aio_freeproc)) != NULL) {
TAILQ_REMOVE(&aio_freeproc, aiop, list);
TAILQ_INSERT_TAIL(&aio_activeproc, aiop, list);
aiop->aiothreadflags &= ~AIOP_FREE;
wakeup(aiop->aiothread);
} else if (((num_aio_resv_start + num_aio_procs) < max_aio_procs) &&
((ki->kaio_active_count + num_aio_resv_start) <
ki->kaio_maxactive_count)) {
num_aio_resv_start++;
if ((error = aio_newproc()) == 0) {
num_aio_resv_start--;
td->td_retval[0] = 0;
goto retryproc;
}
num_aio_resv_start--;
}
splx(s);
done:
fdrop(fp, td);
return error;
}
/*
* This routine queues an AIO request, checking for quotas.
*/
static int
aio_aqueue(struct thread *td, struct aiocb *job, int type)
{
struct proc *p = td->td_proc;
struct kaioinfo *ki;
if (p->p_aioinfo == NULL)
aio_init_aioinfo(p);
if (num_queue_count >= max_queue_count)
return EAGAIN;
ki = p->p_aioinfo;
if (ki->kaio_queue_count >= ki->kaio_qallowed_count)
return EAGAIN;
return _aio_aqueue(td, job, NULL, type);
}
#endif /* VFS_AIO */
/*
* Support the aio_return system call, as a side-effect, kernel resources are
* released.
*/
int
aio_return(struct thread *td, struct aio_return_args *uap)
{
#ifndef VFS_AIO
return ENOSYS;
#else
struct proc *p = td->td_proc;
int s;
int jobref;
struct aiocblist *cb, *ncb;
struct aiocb *ujob;
struct kaioinfo *ki;
ki = p->p_aioinfo;
if (ki == NULL)
return EINVAL;
ujob = uap->aiocbp;
jobref = fuword(&ujob->_aiocb_private.kernelinfo);
if (jobref == -1 || jobref == 0)
return EINVAL;
s = splnet();
for (cb = TAILQ_FIRST(&ki->kaio_jobdone); cb; cb = TAILQ_NEXT(cb,
plist)) {
if (((intptr_t) cb->uaiocb._aiocb_private.kernelinfo) ==
jobref) {
splx(s);
if (ujob == cb->uuaiocb) {
td->td_retval[0] =
cb->uaiocb._aiocb_private.status;
} else
td->td_retval[0] = EFAULT;
if (cb->uaiocb.aio_lio_opcode == LIO_WRITE) {
curproc->p_stats->p_ru.ru_oublock +=
cb->outputcharge;
cb->outputcharge = 0;
} else if (cb->uaiocb.aio_lio_opcode == LIO_READ) {
curproc->p_stats->p_ru.ru_inblock +=
cb->inputcharge;
cb->inputcharge = 0;
}
aio_free_entry(cb);
return 0;
}
}
splx(s);
s = splbio();
for (cb = TAILQ_FIRST(&ki->kaio_bufdone); cb; cb = ncb) {
ncb = TAILQ_NEXT(cb, plist);
if (((intptr_t) cb->uaiocb._aiocb_private.kernelinfo)
== jobref) {
splx(s);
if (ujob == cb->uuaiocb) {
td->td_retval[0] =
cb->uaiocb._aiocb_private.status;
} else
td->td_retval[0] = EFAULT;
aio_free_entry(cb);
return 0;
}
}
splx(s);
return (EINVAL);
#endif /* VFS_AIO */
}
/*
* Allow a process to wakeup when any of the I/O requests are completed.
*/
int
aio_suspend(struct thread *td, struct aio_suspend_args *uap)
{
#ifndef VFS_AIO
return ENOSYS;
#else
struct proc *p = td->td_proc;
struct timeval atv;
struct timespec ts;
struct aiocb *const *cbptr, *cbp;
struct kaioinfo *ki;
struct aiocblist *cb;
int i;
int njoblist;
int error, s, timo;
int *ijoblist;
struct aiocb **ujoblist;
if (uap->nent >= AIO_LISTIO_MAX)
return EINVAL;
timo = 0;
if (uap->timeout) {
/* Get timespec struct. */
if ((error = copyin(uap->timeout, &ts, sizeof(ts))) != 0)
return error;
if (ts.tv_nsec < 0 || ts.tv_nsec >= 1000000000)
return (EINVAL);
TIMESPEC_TO_TIMEVAL(&atv, &ts);
if (itimerfix(&atv))
return (EINVAL);
timo = tvtohz(&atv);
}
ki = p->p_aioinfo;
if (ki == NULL)
return EAGAIN;
njoblist = 0;
ijoblist = zalloc(aiol_zone);
ujoblist = zalloc(aiol_zone);
cbptr = uap->aiocbp;
for (i = 0; i < uap->nent; i++) {
cbp = (struct aiocb *)(intptr_t)fuword((caddr_t)&cbptr[i]);
if (cbp == 0)
continue;
ujoblist[njoblist] = cbp;
ijoblist[njoblist] = fuword(&cbp->_aiocb_private.kernelinfo);
njoblist++;
}
if (njoblist == 0) {
zfree(aiol_zone, ijoblist);
zfree(aiol_zone, ujoblist);
return 0;
}
error = 0;
for (;;) {
for (cb = TAILQ_FIRST(&ki->kaio_jobdone); cb; cb =
TAILQ_NEXT(cb, plist)) {
for (i = 0; i < njoblist; i++) {
if (((intptr_t)
cb->uaiocb._aiocb_private.kernelinfo) ==
ijoblist[i]) {
if (ujoblist[i] != cb->uuaiocb)
error = EINVAL;
zfree(aiol_zone, ijoblist);
zfree(aiol_zone, ujoblist);
return error;
}
}
}
s = splbio();
for (cb = TAILQ_FIRST(&ki->kaio_bufdone); cb; cb =
TAILQ_NEXT(cb, plist)) {
for (i = 0; i < njoblist; i++) {
if (((intptr_t)
cb->uaiocb._aiocb_private.kernelinfo) ==
ijoblist[i]) {
splx(s);
if (ujoblist[i] != cb->uuaiocb)
error = EINVAL;
zfree(aiol_zone, ijoblist);
zfree(aiol_zone, ujoblist);
return error;
}
}
}
ki->kaio_flags |= KAIO_WAKEUP;
error = tsleep(p, PRIBIO | PCATCH, "aiospn", timo);
splx(s);
if (error == ERESTART || error == EINTR) {
zfree(aiol_zone, ijoblist);
zfree(aiol_zone, ujoblist);
return EINTR;
} else if (error == EWOULDBLOCK) {
zfree(aiol_zone, ijoblist);
zfree(aiol_zone, ujoblist);
return EAGAIN;
}
}
/* NOTREACHED */
return EINVAL;
#endif /* VFS_AIO */
}
/*
* aio_cancel cancels any non-physio aio operations not currently in
* progress.
*/
int
aio_cancel(struct thread *td, struct aio_cancel_args *uap)
{
#ifndef VFS_AIO
return ENOSYS;
#else
struct proc *p = td->td_proc;
struct kaioinfo *ki;
struct aiocblist *cbe, *cbn;
struct file *fp;
struct filedesc *fdp;
struct socket *so;
struct proc *po;
int s,error;
int cancelled=0;
int notcancelled=0;
struct vnode *vp;
fdp = p->p_fd;
fp = fdp->fd_ofiles[uap->fd];
if (fp == NULL) {
return EBADF;
}
if (fp->f_type == DTYPE_VNODE) {
vp = (struct vnode *)fp->f_data;
if (vn_isdisk(vp,&error)) {
td->td_retval[0] = AIO_NOTCANCELED;
return 0;
}
} else if (fp->f_type == DTYPE_SOCKET) {
so = (struct socket *)fp->f_data;
s = splnet();
for (cbe = TAILQ_FIRST(&so->so_aiojobq); cbe; cbe = cbn) {
cbn = TAILQ_NEXT(cbe, list);
if ((uap->aiocbp == NULL) ||
(uap->aiocbp == cbe->uuaiocb) ) {
po = cbe->userproc;
ki = po->p_aioinfo;
TAILQ_REMOVE(&so->so_aiojobq, cbe, list);
TAILQ_REMOVE(&ki->kaio_sockqueue, cbe, plist);
TAILQ_INSERT_TAIL(&ki->kaio_jobdone, cbe, plist);
if (ki->kaio_flags & KAIO_WAKEUP) {
wakeup(po);
}
cbe->jobstate = JOBST_JOBFINISHED;
cbe->uaiocb._aiocb_private.status=-1;
cbe->uaiocb._aiocb_private.error=ECANCELED;
cancelled++;
/* XXX cancelled, knote? */
if (cbe->uaiocb.aio_sigevent.sigev_notify ==
SIGEV_SIGNAL) {
PROC_LOCK(cbe->userproc);
psignal(cbe->userproc, cbe->uaiocb.aio_sigevent.sigev_signo);
PROC_UNLOCK(cbe->userproc);
}
if (uap->aiocbp)
break;
}
}
splx(s);
if ((cancelled) && (uap->aiocbp)) {
td->td_retval[0] = AIO_CANCELED;
return 0;
}
}
ki=p->p_aioinfo;
s = splnet();
for (cbe = TAILQ_FIRST(&ki->kaio_jobqueue); cbe; cbe = cbn) {
cbn = TAILQ_NEXT(cbe, plist);
if ((uap->fd == cbe->uaiocb.aio_fildes) &&
((uap->aiocbp == NULL ) ||
(uap->aiocbp == cbe->uuaiocb))) {
if (cbe->jobstate == JOBST_JOBQGLOBAL) {
TAILQ_REMOVE(&aio_jobs, cbe, list);
TAILQ_REMOVE(&ki->kaio_jobqueue, cbe, plist);
TAILQ_INSERT_TAIL(&ki->kaio_jobdone, cbe,
plist);
cancelled++;
ki->kaio_queue_finished_count++;
cbe->jobstate = JOBST_JOBFINISHED;
cbe->uaiocb._aiocb_private.status = -1;
cbe->uaiocb._aiocb_private.error = ECANCELED;
/* XXX cancelled, knote? */
if (cbe->uaiocb.aio_sigevent.sigev_notify ==
SIGEV_SIGNAL) {
PROC_LOCK(cbe->userproc);
psignal(cbe->userproc, cbe->uaiocb.aio_sigevent.sigev_signo);
PROC_UNLOCK(cbe->userproc);
}
} else {
notcancelled++;
}
}
}
splx(s);
if (notcancelled) {
td->td_retval[0] = AIO_NOTCANCELED;
return 0;
}
if (cancelled) {
td->td_retval[0] = AIO_CANCELED;
return 0;
}
td->td_retval[0] = AIO_ALLDONE;
return 0;
#endif /* VFS_AIO */
}
/*
* aio_error is implemented in the kernel level for compatibility purposes only.
* For a user mode async implementation, it would be best to do it in a userland
* subroutine.
*/
int
aio_error(struct thread *td, struct aio_error_args *uap)
{
#ifndef VFS_AIO
return ENOSYS;
#else
struct proc *p = td->td_proc;
int s;
struct aiocblist *cb;
struct kaioinfo *ki;
int jobref;
ki = p->p_aioinfo;
if (ki == NULL)
return EINVAL;
jobref = fuword(&uap->aiocbp->_aiocb_private.kernelinfo);
if ((jobref == -1) || (jobref == 0))
return EINVAL;
for (cb = TAILQ_FIRST(&ki->kaio_jobdone); cb; cb = TAILQ_NEXT(cb,
plist)) {
if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo) ==
jobref) {
td->td_retval[0] = cb->uaiocb._aiocb_private.error;
return 0;
}
}
s = splnet();
for (cb = TAILQ_FIRST(&ki->kaio_jobqueue); cb; cb = TAILQ_NEXT(cb,
plist)) {
if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo) ==
jobref) {
td->td_retval[0] = EINPROGRESS;
splx(s);
return 0;
}
}
for (cb = TAILQ_FIRST(&ki->kaio_sockqueue); cb; cb = TAILQ_NEXT(cb,
plist)) {
if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo) ==
jobref) {
td->td_retval[0] = EINPROGRESS;
splx(s);
return 0;
}
}
splx(s);
s = splbio();
for (cb = TAILQ_FIRST(&ki->kaio_bufdone); cb; cb = TAILQ_NEXT(cb,
plist)) {
if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo) ==
jobref) {
td->td_retval[0] = cb->uaiocb._aiocb_private.error;
splx(s);
return 0;
}
}
for (cb = TAILQ_FIRST(&ki->kaio_bufqueue); cb; cb = TAILQ_NEXT(cb,
plist)) {
if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo) ==
jobref) {
td->td_retval[0] = EINPROGRESS;
splx(s);
return 0;
}
}
splx(s);
#if (0)
/*
* Hack for lio.
*/
status = fuword(&uap->aiocbp->_aiocb_private.status);
if (status == -1)
return fuword(&uap->aiocbp->_aiocb_private.error);
#endif
return EINVAL;
#endif /* VFS_AIO */
}
int
aio_read(struct thread *td, struct aio_read_args *uap)
{
#ifndef VFS_AIO
return ENOSYS;
#else
return aio_aqueue(td, uap->aiocbp, LIO_READ);
#endif /* VFS_AIO */
}
int
aio_write(struct thread *td, struct aio_write_args *uap)
{
#ifndef VFS_AIO
return ENOSYS;
#else
return aio_aqueue(td, uap->aiocbp, LIO_WRITE);
#endif /* VFS_AIO */
}
int
lio_listio(struct thread *td, struct lio_listio_args *uap)
{
#ifndef VFS_AIO
return ENOSYS;
#else
struct proc *p = td->td_proc;
int nent, nentqueued;
struct aiocb *iocb, * const *cbptr;
struct aiocblist *cb;
struct kaioinfo *ki;
struct aio_liojob *lj;
int error, runningcode;
int nerror;
int i;
int s;
if ((uap->mode != LIO_NOWAIT) && (uap->mode != LIO_WAIT))
return EINVAL;
nent = uap->nent;
if (nent > AIO_LISTIO_MAX)
return EINVAL;
if (p->p_aioinfo == NULL)
aio_init_aioinfo(p);
if ((nent + num_queue_count) > max_queue_count)
return EAGAIN;
ki = p->p_aioinfo;
if ((nent + ki->kaio_queue_count) > ki->kaio_qallowed_count)
return EAGAIN;
lj = zalloc(aiolio_zone);
if (!lj)
return EAGAIN;
lj->lioj_flags = 0;
lj->lioj_buffer_count = 0;
lj->lioj_buffer_finished_count = 0;
lj->lioj_queue_count = 0;
lj->lioj_queue_finished_count = 0;
lj->lioj_ki = ki;
/*
* Setup signal.
*/
if (uap->sig && (uap->mode == LIO_NOWAIT)) {
error = copyin(uap->sig, &lj->lioj_signal,
sizeof(lj->lioj_signal));
if (error) {
zfree(aiolio_zone, lj);
return error;
}
if (!_SIG_VALID(lj->lioj_signal.sigev_signo)) {
zfree(aiolio_zone, lj);
return EINVAL;
}
lj->lioj_flags |= LIOJ_SIGNAL;
lj->lioj_flags &= ~LIOJ_SIGNAL_POSTED;
} else
lj->lioj_flags &= ~LIOJ_SIGNAL;
TAILQ_INSERT_TAIL(&ki->kaio_liojoblist, lj, lioj_list);
/*
* Get pointers to the list of I/O requests.
*/
nerror = 0;
nentqueued = 0;
cbptr = uap->acb_list;
for (i = 0; i < uap->nent; i++) {
iocb = (struct aiocb *)(intptr_t)fuword((caddr_t)&cbptr[i]);
if (((intptr_t)iocb != -1) && ((intptr_t)iocb != NULL)) {
error = _aio_aqueue(td, iocb, lj, 0);
if (error == 0)
nentqueued++;
else
nerror++;
}
}
/*
* If we haven't queued any, then just return error.
*/
if (nentqueued == 0)
return 0;
/*
* Calculate the appropriate error return.
*/
runningcode = 0;
if (nerror)
runningcode = EIO;
if (uap->mode == LIO_WAIT) {
int command, found, jobref;
for (;;) {
found = 0;
for (i = 0; i < uap->nent; i++) {
/*
* Fetch address of the control buf pointer in
* user space.
*/
iocb = (struct aiocb *)(intptr_t)fuword((caddr_t)&cbptr[i]);
if (((intptr_t)iocb == -1) || ((intptr_t)iocb
== 0))
continue;
/*
* Fetch the associated command from user space.
*/
command = fuword(&iocb->aio_lio_opcode);
if (command == LIO_NOP) {
found++;
continue;
}
jobref = fuword(&iocb->_aiocb_private.kernelinfo);
TAILQ_FOREACH(cb, &ki->kaio_jobdone, plist) {
if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo)
== jobref) {
if (cb->uaiocb.aio_lio_opcode
== LIO_WRITE) {
curproc->p_stats->p_ru.ru_oublock
+=
cb->outputcharge;
cb->outputcharge = 0;
} else if (cb->uaiocb.aio_lio_opcode
== LIO_READ) {
curproc->p_stats->p_ru.ru_inblock
+= cb->inputcharge;
cb->inputcharge = 0;
}
found++;
break;
}
}
s = splbio();
TAILQ_FOREACH(cb, &ki->kaio_bufdone, plist) {
if (((intptr_t)cb->uaiocb._aiocb_private.kernelinfo)
== jobref) {
found++;
break;
}
}
splx(s);
}
/*
* If all I/Os have been disposed of, then we can
* return.
*/
if (found == nentqueued)
return runningcode;
ki->kaio_flags |= KAIO_WAKEUP;
error = tsleep(p, PRIBIO | PCATCH, "aiospn", 0);
if (error == EINTR)
return EINTR;
else if (error == EWOULDBLOCK)
return EAGAIN;
}
}
return runningcode;
#endif /* VFS_AIO */
}
#ifdef VFS_AIO
/*
* This is a weird hack so that we can post a signal. It is safe to do so from
* a timeout routine, but *not* from an interrupt routine.
*/
static void
process_signal(void *aioj)
{
struct aiocblist *aiocbe = aioj;
struct aio_liojob *lj = aiocbe->lio;
struct aiocb *cb = &aiocbe->uaiocb;
if ((lj) && (lj->lioj_signal.sigev_notify == SIGEV_SIGNAL) &&
(lj->lioj_queue_count == lj->lioj_queue_finished_count)) {
PROC_LOCK(lj->lioj_ki->kaio_p);
psignal(lj->lioj_ki->kaio_p, lj->lioj_signal.sigev_signo);
PROC_UNLOCK(lj->lioj_ki->kaio_p);
lj->lioj_flags |= LIOJ_SIGNAL_POSTED;
}
if (cb->aio_sigevent.sigev_notify == SIGEV_SIGNAL) {
PROC_LOCK(aiocbe->userproc);
psignal(aiocbe->userproc, cb->aio_sigevent.sigev_signo);
PROC_UNLOCK(aiocbe->userproc);
}
}
/*
* Interrupt handler for physio, performs the necessary process wakeups, and
* signals.
*/
static void
aio_physwakeup(struct buf *bp)
{
struct aiocblist *aiocbe;
struct proc *p;
struct kaioinfo *ki;
struct aio_liojob *lj;
wakeup(bp);
aiocbe = (struct aiocblist *)bp->b_spc;
if (aiocbe) {
p = bp->b_caller1;
aiocbe->jobstate = JOBST_JOBBFINISHED;
aiocbe->uaiocb._aiocb_private.status -= bp->b_resid;
aiocbe->uaiocb._aiocb_private.error = 0;
aiocbe->jobflags |= AIOCBLIST_DONE;
if (bp->b_ioflags & BIO_ERROR)
aiocbe->uaiocb._aiocb_private.error = bp->b_error;
lj = aiocbe->lio;
if (lj) {
lj->lioj_buffer_finished_count++;
/*
* wakeup/signal if all of the interrupt jobs are done.
*/
if (lj->lioj_buffer_finished_count ==
lj->lioj_buffer_count) {
/*
* Post a signal if it is called for.
*/
if ((lj->lioj_flags &
(LIOJ_SIGNAL|LIOJ_SIGNAL_POSTED)) ==
LIOJ_SIGNAL) {
lj->lioj_flags |= LIOJ_SIGNAL_POSTED;
aiocbe->timeouthandle =
timeout(process_signal,
aiocbe, 0);
}
}
}
ki = p->p_aioinfo;
if (ki) {
ki->kaio_buffer_finished_count++;
TAILQ_REMOVE(&aio_bufjobs, aiocbe, list);
TAILQ_REMOVE(&ki->kaio_bufqueue, aiocbe, plist);
TAILQ_INSERT_TAIL(&ki->kaio_bufdone, aiocbe, plist);
KNOTE(&aiocbe->klist, 0);
/* Do the wakeup. */
if (ki->kaio_flags & (KAIO_RUNDOWN|KAIO_WAKEUP)) {
ki->kaio_flags &= ~KAIO_WAKEUP;
wakeup(p);
}
}
if (aiocbe->uaiocb.aio_sigevent.sigev_notify == SIGEV_SIGNAL)
aiocbe->timeouthandle =
timeout(process_signal, aiocbe, 0);
}
}
#endif /* VFS_AIO */
int
aio_waitcomplete(struct thread *td, struct aio_waitcomplete_args *uap)
{
#ifndef VFS_AIO
return ENOSYS;
#else
struct proc *p = td->td_proc;
struct timeval atv;
struct timespec ts;
struct aiocb **cbptr;
struct kaioinfo *ki;
struct aiocblist *cb = NULL;
int error, s, timo;
suword(uap->aiocbp, (int)NULL);
timo = 0;
if (uap->timeout) {
/* Get timespec struct. */
error = copyin(uap->timeout, &ts, sizeof(ts));
if (error)
return error;
if ((ts.tv_nsec < 0) || (ts.tv_nsec >= 1000000000))
return (EINVAL);
TIMESPEC_TO_TIMEVAL(&atv, &ts);
if (itimerfix(&atv))
return (EINVAL);
timo = tvtohz(&atv);
}
ki = p->p_aioinfo;
if (ki == NULL)
return EAGAIN;
cbptr = uap->aiocbp;
for (;;) {
if ((cb = TAILQ_FIRST(&ki->kaio_jobdone)) != 0) {
suword(uap->aiocbp, (int)cb->uuaiocb);
td->td_retval[0] = cb->uaiocb._aiocb_private.status;
if (cb->uaiocb.aio_lio_opcode == LIO_WRITE) {
curproc->p_stats->p_ru.ru_oublock +=
cb->outputcharge;
cb->outputcharge = 0;
} else if (cb->uaiocb.aio_lio_opcode == LIO_READ) {
curproc->p_stats->p_ru.ru_inblock +=
cb->inputcharge;
cb->inputcharge = 0;
}
aio_free_entry(cb);
return cb->uaiocb._aiocb_private.error;
}
s = splbio();
if ((cb = TAILQ_FIRST(&ki->kaio_bufdone)) != 0 ) {
splx(s);
suword(uap->aiocbp, (int)cb->uuaiocb);
td->td_retval[0] = cb->uaiocb._aiocb_private.status;
aio_free_entry(cb);
return cb->uaiocb._aiocb_private.error;
}
ki->kaio_flags |= KAIO_WAKEUP;
error = tsleep(p, PRIBIO | PCATCH, "aiowc", timo);
splx(s);
if (error == ERESTART)
return EINTR;
else if (error < 0)
return error;
else if (error == EINTR)
return EINTR;
else if (error == EWOULDBLOCK)
return EAGAIN;
}
#endif /* VFS_AIO */
}
#ifndef VFS_AIO
static int
filt_aioattach(struct knote *kn)
{
return (ENXIO);
}
struct filterops aio_filtops =
{ 0, filt_aioattach, NULL, NULL };
#else
static int
filt_aioattach(struct knote *kn)
{
struct aiocblist *aiocbe = (struct aiocblist *)kn->kn_id;
/*
* The aiocbe pointer must be validated before using it, so
* registration is restricted to the kernel; the user cannot
* set EV_FLAG1.
*/
if ((kn->kn_flags & EV_FLAG1) == 0)
return (EPERM);
kn->kn_flags &= ~EV_FLAG1;
SLIST_INSERT_HEAD(&aiocbe->klist, kn, kn_selnext);
return (0);
}
static void
filt_aiodetach(struct knote *kn)
{
struct aiocblist *aiocbe = (struct aiocblist *)kn->kn_id;
int s = splhigh(); /* XXX no clue, so overkill */
SLIST_REMOVE(&aiocbe->klist, kn, knote, kn_selnext);
splx(s);
}
/*ARGSUSED*/
static int
filt_aio(struct knote *kn, long hint)
{
struct aiocblist *aiocbe = (struct aiocblist *)kn->kn_id;
kn->kn_data = 0; /* XXX data returned? */
if (aiocbe->jobstate != JOBST_JOBFINISHED &&
aiocbe->jobstate != JOBST_JOBBFINISHED)
return (0);
kn->kn_flags |= EV_EOF;
return (1);
}
struct filterops aio_filtops =
{ 0, filt_aioattach, filt_aiodetach, filt_aio };
#endif /* VFS_AIO */
Reference in New Issue View Git Blame Copy Permalink