freebsd-skq/sys/arm/ti/am335x/am335x_lcd.c
Oleksandr Tymoshenko 6f79d9e96c Somewhat improve HDMI event API
- Pass device_t for HDMI framer as an argument for event hook
- Use #define for event values, instead of opaque (and unused) 0
2015-11-14 21:01:35 +00:00

1048 lines
27 KiB
C

/*-
* Copyright 2013 Oleksandr Tymoshenko <gonzo@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_syscons.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/clock.h>
#include <sys/time.h>
#include <sys/bus.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/resource.h>
#include <sys/rman.h>
#include <sys/sysctl.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <sys/fbio.h>
#include <sys/consio.h>
#include <machine/bus.h>
#include <dev/fdt/fdt_common.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/videomode/videomode.h>
#include <dev/videomode/edidvar.h>
#include <dev/fb/fbreg.h>
#ifdef DEV_SC
#include <dev/syscons/syscons.h>
#else /* VT */
#include <dev/vt/vt.h>
#endif
#include <arm/ti/ti_prcm.h>
#include <arm/ti/ti_scm.h>
#include "am335x_lcd.h"
#include "am335x_pwm.h"
#include "fb_if.h"
#include "hdmi_if.h"
#define LCD_PID 0x00
#define LCD_CTRL 0x04
#define CTRL_DIV_MASK 0xff
#define CTRL_DIV_SHIFT 8
#define CTRL_AUTO_UFLOW_RESTART (1 << 1)
#define CTRL_RASTER_MODE 1
#define CTRL_LIDD_MODE 0
#define LCD_LIDD_CTRL 0x0C
#define LCD_LIDD_CS0_CONF 0x10
#define LCD_LIDD_CS0_ADDR 0x14
#define LCD_LIDD_CS0_DATA 0x18
#define LCD_LIDD_CS1_CONF 0x1C
#define LCD_LIDD_CS1_ADDR 0x20
#define LCD_LIDD_CS1_DATA 0x24
#define LCD_RASTER_CTRL 0x28
#define RASTER_CTRL_TFT24_UNPACKED (1 << 26)
#define RASTER_CTRL_TFT24 (1 << 25)
#define RASTER_CTRL_STN565 (1 << 24)
#define RASTER_CTRL_TFTPMAP (1 << 23)
#define RASTER_CTRL_NIBMODE (1 << 22)
#define RASTER_CTRL_PALMODE_SHIFT 20
#define PALETTE_PALETTE_AND_DATA 0x00
#define PALETTE_PALETTE_ONLY 0x01
#define PALETTE_DATA_ONLY 0x02
#define RASTER_CTRL_REQDLY_SHIFT 12
#define RASTER_CTRL_MONO8B (1 << 9)
#define RASTER_CTRL_RBORDER (1 << 8)
#define RASTER_CTRL_LCDTFT (1 << 7)
#define RASTER_CTRL_LCDBW (1 << 1)
#define RASTER_CTRL_LCDEN (1 << 0)
#define LCD_RASTER_TIMING_0 0x2C
#define RASTER_TIMING_0_HBP_SHIFT 24
#define RASTER_TIMING_0_HFP_SHIFT 16
#define RASTER_TIMING_0_HSW_SHIFT 10
#define RASTER_TIMING_0_PPLLSB_SHIFT 4
#define RASTER_TIMING_0_PPLMSB_SHIFT 3
#define LCD_RASTER_TIMING_1 0x30
#define RASTER_TIMING_1_VBP_SHIFT 24
#define RASTER_TIMING_1_VFP_SHIFT 16
#define RASTER_TIMING_1_VSW_SHIFT 10
#define RASTER_TIMING_1_LPP_SHIFT 0
#define LCD_RASTER_TIMING_2 0x34
#define RASTER_TIMING_2_HSWHI_SHIFT 27
#define RASTER_TIMING_2_LPP_B10_SHIFT 26
#define RASTER_TIMING_2_PHSVS (1 << 25)
#define RASTER_TIMING_2_PHSVS_RISE (1 << 24)
#define RASTER_TIMING_2_PHSVS_FALL (0 << 24)
#define RASTER_TIMING_2_IOE (1 << 23)
#define RASTER_TIMING_2_IPC (1 << 22)
#define RASTER_TIMING_2_IHS (1 << 21)
#define RASTER_TIMING_2_IVS (1 << 20)
#define RASTER_TIMING_2_ACBI_SHIFT 16
#define RASTER_TIMING_2_ACB_SHIFT 8
#define RASTER_TIMING_2_HBPHI_SHIFT 4
#define RASTER_TIMING_2_HFPHI_SHIFT 0
#define LCD_RASTER_SUBPANEL 0x38
#define LCD_RASTER_SUBPANEL2 0x3C
#define LCD_LCDDMA_CTRL 0x40
#define LCDDMA_CTRL_DMA_MASTER_PRIO_SHIFT 16
#define LCDDMA_CTRL_TH_FIFO_RDY_SHIFT 8
#define LCDDMA_CTRL_BURST_SIZE_SHIFT 4
#define LCDDMA_CTRL_BYTES_SWAP (1 << 3)
#define LCDDMA_CTRL_BE (1 << 1)
#define LCDDMA_CTRL_FB0_ONLY 0
#define LCDDMA_CTRL_FB0_FB1 (1 << 0)
#define LCD_LCDDMA_FB0_BASE 0x44
#define LCD_LCDDMA_FB0_CEILING 0x48
#define LCD_LCDDMA_FB1_BASE 0x4C
#define LCD_LCDDMA_FB1_CEILING 0x50
#define LCD_SYSCONFIG 0x54
#define SYSCONFIG_STANDBY_FORCE (0 << 4)
#define SYSCONFIG_STANDBY_NONE (1 << 4)
#define SYSCONFIG_STANDBY_SMART (2 << 4)
#define SYSCONFIG_IDLE_FORCE (0 << 2)
#define SYSCONFIG_IDLE_NONE (1 << 2)
#define SYSCONFIG_IDLE_SMART (2 << 2)
#define LCD_IRQSTATUS_RAW 0x58
#define LCD_IRQSTATUS 0x5C
#define LCD_IRQENABLE_SET 0x60
#define LCD_IRQENABLE_CLEAR 0x64
#define IRQ_EOF1 (1 << 9)
#define IRQ_EOF0 (1 << 8)
#define IRQ_PL (1 << 6)
#define IRQ_FUF (1 << 5)
#define IRQ_ACB (1 << 3)
#define IRQ_SYNC_LOST (1 << 2)
#define IRQ_RASTER_DONE (1 << 1)
#define IRQ_FRAME_DONE (1 << 0)
#define LCD_END_OF_INT_IND 0x68
#define LCD_CLKC_ENABLE 0x6C
#define CLKC_ENABLE_DMA (1 << 2)
#define CLKC_ENABLE_LDID (1 << 1)
#define CLKC_ENABLE_CORE (1 << 0)
#define LCD_CLKC_RESET 0x70
#define CLKC_RESET_MAIN (1 << 3)
#define CLKC_RESET_DMA (1 << 2)
#define CLKC_RESET_LDID (1 << 1)
#define CLKC_RESET_CORE (1 << 0)
#define LCD_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
#define LCD_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
#define LCD_LOCK_INIT(_sc) mtx_init(&(_sc)->sc_mtx, \
device_get_nameunit(_sc->sc_dev), "am335x_lcd", MTX_DEF)
#define LCD_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_mtx);
#define LCD_READ4(_sc, reg) bus_read_4((_sc)->sc_mem_res, reg);
#define LCD_WRITE4(_sc, reg, value) \
bus_write_4((_sc)->sc_mem_res, reg, value);
/* Backlight is controlled by eCAS interface on PWM unit 0 */
#define PWM_UNIT 0
#define PWM_PERIOD 100
#define MODE_HBP(mode) ((mode)->htotal - (mode)->hsync_end)
#define MODE_HFP(mode) ((mode)->hsync_start - (mode)->hdisplay)
#define MODE_HSW(mode) ((mode)->hsync_end - (mode)->hsync_start)
#define MODE_VBP(mode) ((mode)->vtotal - (mode)->vsync_end)
#define MODE_VFP(mode) ((mode)->vsync_start - (mode)->vdisplay)
#define MODE_VSW(mode) ((mode)->vsync_end - (mode)->vsync_start)
#define MAX_PIXEL_CLOCK 126000
#define MAX_BANDWIDTH (1280*1024*60)
struct am335x_lcd_softc {
device_t sc_dev;
struct fb_info sc_fb_info;
struct resource *sc_mem_res;
struct resource *sc_irq_res;
void *sc_intr_hl;
struct mtx sc_mtx;
int sc_backlight;
struct sysctl_oid *sc_oid;
struct panel_info sc_panel;
/* Framebuffer */
bus_dma_tag_t sc_dma_tag;
bus_dmamap_t sc_dma_map;
size_t sc_fb_size;
bus_addr_t sc_fb_phys;
uint8_t *sc_fb_base;
/* HDMI framer */
phandle_t sc_hdmi_framer;
eventhandler_tag sc_hdmi_evh;
};
static void
am335x_fb_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int err)
{
bus_addr_t *addr;
if (err)
return;
addr = (bus_addr_t*)arg;
*addr = segs[0].ds_addr;
}
static uint32_t
am335x_lcd_calc_divisor(uint32_t reference, uint32_t freq)
{
uint32_t div, i;
uint32_t delta, min_delta;
min_delta = freq;
div = 255;
/* Raster mode case: divisors are in range from 2 to 255 */
for (i = 2; i < 255; i++) {
delta = abs(reference/i - freq);
if (delta < min_delta) {
div = i;
min_delta = delta;
}
}
return (div);
}
static int
am335x_lcd_sysctl_backlight(SYSCTL_HANDLER_ARGS)
{
struct am335x_lcd_softc *sc = (struct am335x_lcd_softc*)arg1;
int error;
int backlight;
backlight = sc->sc_backlight;
error = sysctl_handle_int(oidp, &backlight, 0, req);
if (error != 0 || req->newptr == NULL)
return (error);
if (backlight < 0)
backlight = 0;
if (backlight > 100)
backlight = 100;
LCD_LOCK(sc);
error = am335x_pwm_config_ecap(PWM_UNIT, PWM_PERIOD,
backlight*PWM_PERIOD/100);
if (error == 0)
sc->sc_backlight = backlight;
LCD_UNLOCK(sc);
return (error);
}
static uint32_t
am335x_mode_vrefresh(const struct videomode *mode)
{
uint32_t refresh;
/* Calculate vertical refresh rate */
refresh = (mode->dot_clock * 1000 / mode->htotal);
refresh = (refresh + mode->vtotal / 2) / mode->vtotal;
if (mode->flags & VID_INTERLACE)
refresh *= 2;
if (mode->flags & VID_DBLSCAN)
refresh /= 2;
return refresh;
}
static int
am335x_mode_is_valid(const struct videomode *mode)
{
uint32_t hbp, hfp, hsw;
uint32_t vbp, vfp, vsw;
if (mode->dot_clock > MAX_PIXEL_CLOCK)
return (0);
if (mode->hdisplay & 0xf)
return (0);
if (mode->vdisplay > 2048)
return (0);
/* Check ranges for timing parameters */
hbp = MODE_HBP(mode) - 1;
hfp = MODE_HFP(mode) - 1;
hsw = MODE_HSW(mode) - 1;
vbp = MODE_VBP(mode);
vfp = MODE_VFP(mode);
vsw = MODE_VSW(mode) - 1;
if (hbp > 0x3ff)
return (0);
if (hfp > 0x3ff)
return (0);
if (hsw > 0x3ff)
return (0);
if (vbp > 0xff)
return (0);
if (vfp > 0xff)
return (0);
if (vsw > 0x3f)
return (0);
if (mode->vdisplay*mode->hdisplay*am335x_mode_vrefresh(mode)
> MAX_BANDWIDTH)
return (0);
return (1);
}
static void
am335x_read_hdmi_property(device_t dev)
{
phandle_t node;
phandle_t hdmi_xref;
struct am335x_lcd_softc *sc;
sc = device_get_softc(dev);
node = ofw_bus_get_node(dev);
if (OF_getencprop(node, "hdmi", &hdmi_xref, sizeof(hdmi_xref)) == -1)
sc->sc_hdmi_framer = 0;
else
sc->sc_hdmi_framer = hdmi_xref;
}
static int
am335x_read_property(device_t dev, phandle_t node, const char *name, uint32_t *val)
{
pcell_t cell;
if ((OF_getprop(node, name, &cell, sizeof(cell))) <= 0) {
device_printf(dev, "missing '%s' attribute in LCD panel info\n",
name);
return (ENXIO);
}
*val = fdt32_to_cpu(cell);
return (0);
}
static int
am335x_read_timing(device_t dev, phandle_t node, struct panel_info *panel)
{
int error;
phandle_t timings_node, timing_node, native;
timings_node = ofw_bus_find_child(node, "display-timings");
if (timings_node == 0) {
device_printf(dev, "no \"display-timings\" node\n");
return (-1);
}
if (OF_searchencprop(timings_node, "native-mode", &native,
sizeof(native)) == -1) {
device_printf(dev, "no \"native-mode\" reference in \"timings\" node\n");
return (-1);
}
timing_node = OF_node_from_xref(native);
error = 0;
if ((error = am335x_read_property(dev, timing_node,
"hactive", &panel->panel_width)))
goto out;
if ((error = am335x_read_property(dev, timing_node,
"vactive", &panel->panel_height)))
goto out;
if ((error = am335x_read_property(dev, timing_node,
"hfront-porch", &panel->panel_hfp)))
goto out;
if ((error = am335x_read_property(dev, timing_node,
"hback-porch", &panel->panel_hbp)))
goto out;
if ((error = am335x_read_property(dev, timing_node,
"hsync-len", &panel->panel_hsw)))
goto out;
if ((error = am335x_read_property(dev, timing_node,
"vfront-porch", &panel->panel_vfp)))
goto out;
if ((error = am335x_read_property(dev, timing_node,
"vback-porch", &panel->panel_vbp)))
goto out;
if ((error = am335x_read_property(dev, timing_node,
"vsync-len", &panel->panel_vsw)))
goto out;
if ((error = am335x_read_property(dev, timing_node,
"clock-frequency", &panel->panel_pxl_clk)))
goto out;
if ((error = am335x_read_property(dev, timing_node,
"pixelclk-active", &panel->pixelclk_active)))
goto out;
if ((error = am335x_read_property(dev, timing_node,
"hsync-active", &panel->hsync_active)))
goto out;
if ((error = am335x_read_property(dev, timing_node,
"vsync-active", &panel->vsync_active)))
goto out;
out:
return (error);
}
static int
am335x_read_panel_info(device_t dev, phandle_t node, struct panel_info *panel)
{
phandle_t panel_info_node;
panel_info_node = ofw_bus_find_child(node, "panel-info");
if (panel_info_node == 0)
return (-1);
am335x_read_property(dev, panel_info_node,
"ac-bias", &panel->ac_bias);
am335x_read_property(dev, panel_info_node,
"ac-bias-intrpt", &panel->ac_bias_intrpt);
am335x_read_property(dev, panel_info_node,
"dma-burst-sz", &panel->dma_burst_sz);
am335x_read_property(dev, panel_info_node,
"bpp", &panel->bpp);
am335x_read_property(dev, panel_info_node,
"fdd", &panel->fdd);
am335x_read_property(dev, panel_info_node,
"sync-edge", &panel->sync_edge);
am335x_read_property(dev, panel_info_node,
"sync-ctrl", &panel->sync_ctrl);
return (0);
}
static void
am335x_lcd_intr(void *arg)
{
struct am335x_lcd_softc *sc = arg;
uint32_t reg;
reg = LCD_READ4(sc, LCD_IRQSTATUS);
LCD_WRITE4(sc, LCD_IRQSTATUS, reg);
/* Read value back to make sure it reached the hardware */
reg = LCD_READ4(sc, LCD_IRQSTATUS);
if (reg & IRQ_SYNC_LOST) {
reg = LCD_READ4(sc, LCD_RASTER_CTRL);
reg &= ~RASTER_CTRL_LCDEN;
LCD_WRITE4(sc, LCD_RASTER_CTRL, reg);
reg = LCD_READ4(sc, LCD_RASTER_CTRL);
reg |= RASTER_CTRL_LCDEN;
LCD_WRITE4(sc, LCD_RASTER_CTRL, reg);
goto done;
}
if (reg & IRQ_PL) {
reg = LCD_READ4(sc, LCD_RASTER_CTRL);
reg &= ~RASTER_CTRL_LCDEN;
LCD_WRITE4(sc, LCD_RASTER_CTRL, reg);
reg = LCD_READ4(sc, LCD_RASTER_CTRL);
reg |= RASTER_CTRL_LCDEN;
LCD_WRITE4(sc, LCD_RASTER_CTRL, reg);
goto done;
}
if (reg & IRQ_EOF0) {
LCD_WRITE4(sc, LCD_LCDDMA_FB0_BASE, sc->sc_fb_phys);
LCD_WRITE4(sc, LCD_LCDDMA_FB0_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1);
reg &= ~IRQ_EOF0;
}
if (reg & IRQ_EOF1) {
LCD_WRITE4(sc, LCD_LCDDMA_FB1_BASE, sc->sc_fb_phys);
LCD_WRITE4(sc, LCD_LCDDMA_FB1_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1);
reg &= ~IRQ_EOF1;
}
if (reg & IRQ_FUF) {
/* TODO: Handle FUF */
}
if (reg & IRQ_ACB) {
/* TODO: Handle ACB */
}
done:
LCD_WRITE4(sc, LCD_END_OF_INT_IND, 0);
/* Read value back to make sure it reached the hardware */
reg = LCD_READ4(sc, LCD_END_OF_INT_IND);
}
static const struct videomode *
am335x_lcd_pick_mode(struct edid_info *ei)
{
const struct videomode *videomode;
const struct videomode *m;
int n;
/* Get standard VGA as default */
videomode = NULL;
/*
* Pick a mode.
*/
if (ei->edid_preferred_mode != NULL) {
if (am335x_mode_is_valid(ei->edid_preferred_mode))
videomode = ei->edid_preferred_mode;
}
if (videomode == NULL) {
m = ei->edid_modes;
sort_modes(ei->edid_modes,
&ei->edid_preferred_mode,
ei->edid_nmodes);
for (n = 0; n < ei->edid_nmodes; n++)
if (am335x_mode_is_valid(&m[n])) {
videomode = &m[n];
break;
}
}
return videomode;
}
static int
am335x_lcd_configure(struct am335x_lcd_softc *sc)
{
int div;
uint32_t reg, timing0, timing1, timing2;
uint32_t burst_log;
size_t dma_size;
uint32_t hbp, hfp, hsw;
uint32_t vbp, vfp, vsw;
uint32_t width, height;
unsigned int ref_freq;
int err;
/*
* try to adjust clock to get double of requested frequency
* HDMI/DVI displays are very sensitive to error in frequncy value
*/
if (ti_prcm_clk_set_source_freq(LCDC_CLK, sc->sc_panel.panel_pxl_clk*2)) {
device_printf(sc->sc_dev, "can't set source frequency\n");
return (ENXIO);
}
if (ti_prcm_clk_get_source_freq(LCDC_CLK, &ref_freq)) {
device_printf(sc->sc_dev, "can't get reference frequency\n");
return (ENXIO);
}
/* Panle initialization */
dma_size = round_page(sc->sc_panel.panel_width*sc->sc_panel.panel_height*sc->sc_panel.bpp/8);
/*
* Now allocate framebuffer memory
*/
err = bus_dma_tag_create(
bus_get_dma_tag(sc->sc_dev),
4, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
dma_size, 1, /* maxsize, nsegments */
dma_size, 0, /* maxsegsize, flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->sc_dma_tag);
if (err)
goto done;
err = bus_dmamem_alloc(sc->sc_dma_tag, (void **)&sc->sc_fb_base,
BUS_DMA_COHERENT, &sc->sc_dma_map);
if (err) {
device_printf(sc->sc_dev, "cannot allocate framebuffer\n");
goto done;
}
err = bus_dmamap_load(sc->sc_dma_tag, sc->sc_dma_map, sc->sc_fb_base,
dma_size, am335x_fb_dmamap_cb, &sc->sc_fb_phys, BUS_DMA_NOWAIT);
if (err) {
device_printf(sc->sc_dev, "cannot load DMA map\n");
goto done;
}
/* Make sure it's blank */
memset(sc->sc_fb_base, 0x0, dma_size);
/* Calculate actual FB Size */
sc->sc_fb_size = sc->sc_panel.panel_width*sc->sc_panel.panel_height*sc->sc_panel.bpp/8;
/* Only raster mode is supported */
reg = CTRL_RASTER_MODE;
div = am335x_lcd_calc_divisor(ref_freq, sc->sc_panel.panel_pxl_clk);
reg |= (div << CTRL_DIV_SHIFT);
LCD_WRITE4(sc, LCD_CTRL, reg);
/* Set timing */
timing0 = timing1 = timing2 = 0;
hbp = sc->sc_panel.panel_hbp - 1;
hfp = sc->sc_panel.panel_hfp - 1;
hsw = sc->sc_panel.panel_hsw - 1;
vbp = sc->sc_panel.panel_vbp;
vfp = sc->sc_panel.panel_vfp;
vsw = sc->sc_panel.panel_vsw - 1;
height = sc->sc_panel.panel_height - 1;
width = sc->sc_panel.panel_width - 1;
/* Horizontal back porch */
timing0 |= (hbp & 0xff) << RASTER_TIMING_0_HBP_SHIFT;
timing2 |= ((hbp >> 8) & 3) << RASTER_TIMING_2_HBPHI_SHIFT;
/* Horizontal front porch */
timing0 |= (hfp & 0xff) << RASTER_TIMING_0_HFP_SHIFT;
timing2 |= ((hfp >> 8) & 3) << RASTER_TIMING_2_HFPHI_SHIFT;
/* Horizontal sync width */
timing0 |= (hsw & 0x3f) << RASTER_TIMING_0_HSW_SHIFT;
timing2 |= ((hsw >> 6) & 0xf) << RASTER_TIMING_2_HSWHI_SHIFT;
/* Vertical back porch, front porch, sync width */
timing1 |= (vbp & 0xff) << RASTER_TIMING_1_VBP_SHIFT;
timing1 |= (vfp & 0xff) << RASTER_TIMING_1_VFP_SHIFT;
timing1 |= (vsw & 0x3f) << RASTER_TIMING_1_VSW_SHIFT;
/* Pixels per line */
timing0 |= ((width >> 10) & 1)
<< RASTER_TIMING_0_PPLMSB_SHIFT;
timing0 |= ((width >> 4) & 0x3f)
<< RASTER_TIMING_0_PPLLSB_SHIFT;
/* Lines per panel */
timing1 |= (height & 0x3ff)
<< RASTER_TIMING_1_LPP_SHIFT;
timing2 |= ((height >> 10 ) & 1)
<< RASTER_TIMING_2_LPP_B10_SHIFT;
/* clock signal settings */
if (sc->sc_panel.sync_ctrl)
timing2 |= RASTER_TIMING_2_PHSVS;
if (sc->sc_panel.sync_edge)
timing2 |= RASTER_TIMING_2_PHSVS_RISE;
else
timing2 |= RASTER_TIMING_2_PHSVS_FALL;
if (sc->sc_panel.hsync_active == 0)
timing2 |= RASTER_TIMING_2_IHS;
if (sc->sc_panel.vsync_active == 0)
timing2 |= RASTER_TIMING_2_IVS;
if (sc->sc_panel.pixelclk_active == 0)
timing2 |= RASTER_TIMING_2_IPC;
/* AC bias */
timing2 |= (sc->sc_panel.ac_bias << RASTER_TIMING_2_ACB_SHIFT);
timing2 |= (sc->sc_panel.ac_bias_intrpt << RASTER_TIMING_2_ACBI_SHIFT);
LCD_WRITE4(sc, LCD_RASTER_TIMING_0, timing0);
LCD_WRITE4(sc, LCD_RASTER_TIMING_1, timing1);
LCD_WRITE4(sc, LCD_RASTER_TIMING_2, timing2);
/* DMA settings */
reg = LCDDMA_CTRL_FB0_FB1;
/* Find power of 2 for current burst size */
switch (sc->sc_panel.dma_burst_sz) {
case 1:
burst_log = 0;
break;
case 2:
burst_log = 1;
break;
case 4:
burst_log = 2;
break;
case 8:
burst_log = 3;
break;
case 16:
default:
burst_log = 4;
break;
}
reg |= (burst_log << LCDDMA_CTRL_BURST_SIZE_SHIFT);
/* XXX: FIFO TH */
reg |= (0 << LCDDMA_CTRL_TH_FIFO_RDY_SHIFT);
LCD_WRITE4(sc, LCD_LCDDMA_CTRL, reg);
LCD_WRITE4(sc, LCD_LCDDMA_FB0_BASE, sc->sc_fb_phys);
LCD_WRITE4(sc, LCD_LCDDMA_FB0_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1);
LCD_WRITE4(sc, LCD_LCDDMA_FB1_BASE, sc->sc_fb_phys);
LCD_WRITE4(sc, LCD_LCDDMA_FB1_CEILING, sc->sc_fb_phys + sc->sc_fb_size - 1);
/* Enable LCD */
reg = RASTER_CTRL_LCDTFT;
reg |= (sc->sc_panel.fdd << RASTER_CTRL_REQDLY_SHIFT);
reg |= (PALETTE_DATA_ONLY << RASTER_CTRL_PALMODE_SHIFT);
if (sc->sc_panel.bpp >= 24)
reg |= RASTER_CTRL_TFT24;
if (sc->sc_panel.bpp == 32)
reg |= RASTER_CTRL_TFT24_UNPACKED;
LCD_WRITE4(sc, LCD_RASTER_CTRL, reg);
LCD_WRITE4(sc, LCD_CLKC_ENABLE,
CLKC_ENABLE_DMA | CLKC_ENABLE_LDID | CLKC_ENABLE_CORE);
LCD_WRITE4(sc, LCD_CLKC_RESET, CLKC_RESET_MAIN);
DELAY(100);
LCD_WRITE4(sc, LCD_CLKC_RESET, 0);
reg = IRQ_EOF1 | IRQ_EOF0 | IRQ_FUF | IRQ_PL |
IRQ_ACB | IRQ_SYNC_LOST | IRQ_RASTER_DONE |
IRQ_FRAME_DONE;
LCD_WRITE4(sc, LCD_IRQENABLE_SET, reg);
reg = LCD_READ4(sc, LCD_RASTER_CTRL);
reg |= RASTER_CTRL_LCDEN;
LCD_WRITE4(sc, LCD_RASTER_CTRL, reg);
LCD_WRITE4(sc, LCD_SYSCONFIG,
SYSCONFIG_STANDBY_SMART | SYSCONFIG_IDLE_SMART);
sc->sc_fb_info.fb_name = device_get_nameunit(sc->sc_dev);
sc->sc_fb_info.fb_vbase = (intptr_t)sc->sc_fb_base;
sc->sc_fb_info.fb_pbase = sc->sc_fb_phys;
sc->sc_fb_info.fb_size = sc->sc_fb_size;
sc->sc_fb_info.fb_bpp = sc->sc_fb_info.fb_depth = sc->sc_panel.bpp;
sc->sc_fb_info.fb_stride = sc->sc_panel.panel_width*sc->sc_panel.bpp / 8;
sc->sc_fb_info.fb_width = sc->sc_panel.panel_width;
sc->sc_fb_info.fb_height = sc->sc_panel.panel_height;
#ifdef DEV_SC
err = (sc_attach_unit(device_get_unit(sc->sc_dev),
device_get_flags(sc->sc_dev) | SC_AUTODETECT_KBD));
if (err) {
device_printf(sc->sc_dev, "failed to attach syscons\n");
goto fail;
}
am335x_lcd_syscons_setup((vm_offset_t)sc->sc_fb_base, sc->sc_fb_phys, &panel);
#else /* VT */
device_t fbd = device_add_child(sc->sc_dev, "fbd",
device_get_unit(sc->sc_dev));
if (fbd != NULL) {
if (device_probe_and_attach(fbd) != 0)
device_printf(sc->sc_dev, "failed to attach fbd device\n");
} else
device_printf(sc->sc_dev, "failed to add fbd child\n");
#endif
done:
return (err);
}
static void
am335x_lcd_hdmi_event(void *arg, device_t hdmi, int event)
{
struct am335x_lcd_softc *sc;
const struct videomode *videomode;
struct videomode hdmi_mode;
device_t hdmi_dev;
uint8_t *edid;
uint32_t edid_len;
struct edid_info ei;
sc = arg;
/* Nothing to work with */
if (!sc->sc_hdmi_framer) {
device_printf(sc->sc_dev, "HDMI event without HDMI framer set\n");
return;
}
hdmi_dev = OF_device_from_xref(sc->sc_hdmi_framer);
if (!hdmi_dev) {
device_printf(sc->sc_dev, "no actual device for \"hdmi\" property\n");
return;
}
edid = NULL;
edid_len = 0;
if (HDMI_GET_EDID(hdmi_dev, &edid, &edid_len) != 0) {
device_printf(sc->sc_dev, "failed to get EDID info from HDMI framer\n");
return;
}
videomode = NULL;
if (edid_parse(edid, &ei) == 0) {
edid_print(&ei);
videomode = am335x_lcd_pick_mode(&ei);
} else
device_printf(sc->sc_dev, "failed to parse EDID\n");
/* Use standard VGA as fallback */
if (videomode == NULL)
videomode = pick_mode_by_ref(640, 480, 60);
if (videomode == NULL) {
device_printf(sc->sc_dev, "failed to find usable videomode");
return;
}
device_printf(sc->sc_dev, "detected videomode: %dx%d @ %dKHz\n", videomode->hdisplay,
videomode->vdisplay, am335x_mode_vrefresh(videomode));
sc->sc_panel.panel_width = videomode->hdisplay;
sc->sc_panel.panel_height = videomode->vdisplay;
sc->sc_panel.panel_hfp = videomode->hsync_start - videomode->hdisplay;
sc->sc_panel.panel_hbp = videomode->htotal - videomode->hsync_end;
sc->sc_panel.panel_hsw = videomode->hsync_end - videomode->hsync_start;
sc->sc_panel.panel_vfp = videomode->vsync_start - videomode->vdisplay;
sc->sc_panel.panel_vbp = videomode->vtotal - videomode->vsync_end;
sc->sc_panel.panel_vsw = videomode->vsync_end - videomode->vsync_start;
sc->sc_panel.pixelclk_active = 1;
/* logic for HSYNC should be reversed */
if (videomode->flags & VID_NHSYNC)
sc->sc_panel.hsync_active = 1;
else
sc->sc_panel.hsync_active = 0;
if (videomode->flags & VID_NVSYNC)
sc->sc_panel.vsync_active = 0;
else
sc->sc_panel.vsync_active = 1;
sc->sc_panel.panel_pxl_clk = videomode->dot_clock * 1000;
am335x_lcd_configure(sc);
memcpy(&hdmi_mode, videomode, sizeof(hdmi_mode));
hdmi_mode.hskew = videomode->hsync_end - videomode->hsync_start;
hdmi_mode.flags |= VID_HSKEW;
HDMI_SET_VIDEOMODE(hdmi_dev, &hdmi_mode);
}
static int
am335x_lcd_probe(device_t dev)
{
#ifdef DEV_SC
int err;
#endif
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (!ofw_bus_is_compatible(dev, "ti,am33xx-tilcdc"))
return (ENXIO);
device_set_desc(dev, "AM335x LCD controller");
#ifdef DEV_SC
err = sc_probe_unit(device_get_unit(dev),
device_get_flags(dev) | SC_AUTODETECT_KBD);
if (err != 0)
return (err);
#endif
return (BUS_PROBE_DEFAULT);
}
static int
am335x_lcd_attach(device_t dev)
{
struct am335x_lcd_softc *sc;
int err;
int rid;
struct sysctl_ctx_list *ctx;
struct sysctl_oid *tree;
phandle_t root, panel_node;
err = 0;
sc = device_get_softc(dev);
sc->sc_dev = dev;
am335x_read_hdmi_property(dev);
root = OF_finddevice("/");
if (root == 0) {
device_printf(dev, "failed to get FDT root node\n");
return (ENXIO);
}
sc->sc_panel.ac_bias = 255;
sc->sc_panel.ac_bias_intrpt = 0;
sc->sc_panel.dma_burst_sz = 16;
sc->sc_panel.bpp = 16;
sc->sc_panel.fdd = 128;
sc->sc_panel.sync_edge = 0;
sc->sc_panel.sync_ctrl = 1;
panel_node = fdt_find_compatible(root, "ti,tilcdc,panel", 1);
if (panel_node != 0) {
device_printf(dev, "using static panel info\n");
if (am335x_read_panel_info(dev, panel_node, &sc->sc_panel)) {
device_printf(dev, "failed to read panel info\n");
return (ENXIO);
}
if (am335x_read_timing(dev, panel_node, &sc->sc_panel)) {
device_printf(dev, "failed to read timings\n");
return (ENXIO);
}
}
ti_prcm_clk_enable(LCDC_CLK);
rid = 0;
sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (!sc->sc_mem_res) {
device_printf(dev, "cannot allocate memory window\n");
return (ENXIO);
}
rid = 0;
sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_ACTIVE);
if (!sc->sc_irq_res) {
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);
device_printf(dev, "cannot allocate interrupt\n");
return (ENXIO);
}
if (bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_MISC | INTR_MPSAFE,
NULL, am335x_lcd_intr, sc,
&sc->sc_intr_hl) != 0) {
bus_release_resource(dev, SYS_RES_IRQ, rid,
sc->sc_irq_res);
bus_release_resource(dev, SYS_RES_MEMORY, rid,
sc->sc_mem_res);
device_printf(dev, "Unable to setup the irq handler.\n");
return (ENXIO);
}
LCD_LOCK_INIT(sc);
/* Init backlight interface */
ctx = device_get_sysctl_ctx(sc->sc_dev);
tree = device_get_sysctl_tree(sc->sc_dev);
sc->sc_oid = SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
"backlight", CTLTYPE_INT | CTLFLAG_RW, sc, 0,
am335x_lcd_sysctl_backlight, "I", "LCD backlight");
sc->sc_backlight = 0;
/* Check if eCAS interface is available at this point */
if (am335x_pwm_config_ecap(PWM_UNIT,
PWM_PERIOD, PWM_PERIOD) == 0)
sc->sc_backlight = 100;
if (panel_node != 0)
am335x_lcd_configure(sc);
else
sc->sc_hdmi_evh = EVENTHANDLER_REGISTER(hdmi_event,
am335x_lcd_hdmi_event, sc, EVENTHANDLER_PRI_ANY);
return (0);
}
static int
am335x_lcd_detach(device_t dev)
{
/* Do not let unload driver */
return (EBUSY);
}
static struct fb_info *
am335x_lcd_fb_getinfo(device_t dev)
{
struct am335x_lcd_softc *sc;
sc = device_get_softc(dev);
return (&sc->sc_fb_info);
}
static device_method_t am335x_lcd_methods[] = {
DEVMETHOD(device_probe, am335x_lcd_probe),
DEVMETHOD(device_attach, am335x_lcd_attach),
DEVMETHOD(device_detach, am335x_lcd_detach),
/* Framebuffer service methods */
DEVMETHOD(fb_getinfo, am335x_lcd_fb_getinfo),
DEVMETHOD_END
};
static driver_t am335x_lcd_driver = {
"fb",
am335x_lcd_methods,
sizeof(struct am335x_lcd_softc),
};
static devclass_t am335x_lcd_devclass;
DRIVER_MODULE(am335x_lcd, simplebus, am335x_lcd_driver, am335x_lcd_devclass, 0, 0);
MODULE_VERSION(am335x_lcd, 1);
MODULE_DEPEND(am335x_lcd, simplebus, 1, 1, 1);