d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
31eb438886
freebsd-skq/sys/net80211/ieee80211_node.c
Jung-uk Kim fd90e2ed54 CALLOUT_MPSAFE has lost its meaning since r141428, i.e., for more than ten 
years for head.  However, it is continuously misused as the mpsafe argument
for callout_init(9).  Deprecate the flag and clean up callout_init() calls
to make them more consistent.

Differential Revision:	https://reviews.freebsd.org/D2613
Reviewed by:	jhb
MFC after:	2 weeks
2015-05-22 17:05:21 +00:00

2828 lines
80 KiB
C
Raw Blame History

/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_media.h>
#include <net/ethernet.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_input.h>
#ifdef IEEE80211_SUPPORT_SUPERG
#include <net80211/ieee80211_superg.h>
#endif
#ifdef IEEE80211_SUPPORT_TDMA
#include <net80211/ieee80211_tdma.h>
#endif
#include <net80211/ieee80211_wds.h>
#include <net80211/ieee80211_mesh.h>
#include <net80211/ieee80211_ratectl.h>
#include <net/bpf.h>
/*
* IEEE80211_NODE_HASHSIZE must be a power of 2.
*/
CTASSERT((IEEE80211_NODE_HASHSIZE & (IEEE80211_NODE_HASHSIZE-1)) == 0);
/*
* Association id's are managed with a bit vector.
*/
#define IEEE80211_AID_SET(_vap, b) \
((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] |= \
(1 << (IEEE80211_AID(b) % 32)))
#define IEEE80211_AID_CLR(_vap, b) \
((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] &= \
~(1 << (IEEE80211_AID(b) % 32)))
#define IEEE80211_AID_ISSET(_vap, b) \
((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] & (1 << (IEEE80211_AID(b) % 32)))
#ifdef IEEE80211_DEBUG_REFCNT
#define REFCNT_LOC "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line
#else
#define REFCNT_LOC "%s %p<%s> refcnt %d\n", __func__
#endif
static int ieee80211_sta_join1(struct ieee80211_node *);
static struct ieee80211_node *node_alloc(struct ieee80211vap *,
const uint8_t [IEEE80211_ADDR_LEN]);
static void node_cleanup(struct ieee80211_node *);
static void node_free(struct ieee80211_node *);
static void node_age(struct ieee80211_node *);
static int8_t node_getrssi(const struct ieee80211_node *);
static void node_getsignal(const struct ieee80211_node *, int8_t *, int8_t *);
static void node_getmimoinfo(const struct ieee80211_node *,
struct ieee80211_mimo_info *);
static void _ieee80211_free_node(struct ieee80211_node *);
static void node_reclaim(struct ieee80211_node_table *nt,
struct ieee80211_node *ni);
static void ieee80211_node_table_init(struct ieee80211com *ic,
struct ieee80211_node_table *nt, const char *name,
int inact, int keymaxix);
static void ieee80211_node_table_reset(struct ieee80211_node_table *,
struct ieee80211vap *);
static void ieee80211_node_table_cleanup(struct ieee80211_node_table *nt);
static void ieee80211_erp_timeout(struct ieee80211com *);
MALLOC_DEFINE(M_80211_NODE, "80211node", "802.11 node state");
MALLOC_DEFINE(M_80211_NODE_IE, "80211nodeie", "802.11 node ie");
void
ieee80211_node_attach(struct ieee80211com *ic)
{
/* XXX really want maxlen enforced per-sta */
ieee80211_ageq_init(&ic->ic_stageq, ic->ic_max_keyix * 8,
"802.11 staging q");
ieee80211_node_table_init(ic, &ic->ic_sta, "station",
IEEE80211_INACT_INIT, ic->ic_max_keyix);
callout_init(&ic->ic_inact, 1);
callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz,
ieee80211_node_timeout, ic);
ic->ic_node_alloc = node_alloc;
ic->ic_node_free = node_free;
ic->ic_node_cleanup = node_cleanup;
ic->ic_node_age = node_age;
ic->ic_node_drain = node_age; /* NB: same as age */
ic->ic_node_getrssi = node_getrssi;
ic->ic_node_getsignal = node_getsignal;
ic->ic_node_getmimoinfo = node_getmimoinfo;
/*
* Set flags to be propagated to all vap's;
* these define default behaviour/configuration.
*/
ic->ic_flags_ext |= IEEE80211_FEXT_INACT; /* inactivity processing */
}
void
ieee80211_node_detach(struct ieee80211com *ic)
{
callout_drain(&ic->ic_inact);
ieee80211_node_table_cleanup(&ic->ic_sta);
ieee80211_ageq_cleanup(&ic->ic_stageq);
}
void
ieee80211_node_vattach(struct ieee80211vap *vap)
{
/* NB: driver can override */
vap->iv_max_aid = IEEE80211_AID_DEF;
/* default station inactivity timer setings */
vap->iv_inact_init = IEEE80211_INACT_INIT;
vap->iv_inact_auth = IEEE80211_INACT_AUTH;
vap->iv_inact_run = IEEE80211_INACT_RUN;
vap->iv_inact_probe = IEEE80211_INACT_PROBE;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_INACT,
"%s: init %u auth %u run %u probe %u\n", __func__,
vap->iv_inact_init, vap->iv_inact_auth,
vap->iv_inact_run, vap->iv_inact_probe);
}
void
ieee80211_node_latevattach(struct ieee80211vap *vap)
{
if (vap->iv_opmode == IEEE80211_M_HOSTAP) {
/* XXX should we allow max aid to be zero? */
if (vap->iv_max_aid < IEEE80211_AID_MIN) {
vap->iv_max_aid = IEEE80211_AID_MIN;
if_printf(vap->iv_ifp,
"WARNING: max aid too small, changed to %d\n",
vap->iv_max_aid);
}
vap->iv_aid_bitmap = (uint32_t *) malloc(
howmany(vap->iv_max_aid, 32) * sizeof(uint32_t),
M_80211_NODE, M_NOWAIT | M_ZERO);
if (vap->iv_aid_bitmap == NULL) {
/* XXX no way to recover */
printf("%s: no memory for AID bitmap, max aid %d!\n",
__func__, vap->iv_max_aid);
vap->iv_max_aid = 0;
}
}
ieee80211_reset_bss(vap);
vap->iv_auth = ieee80211_authenticator_get(vap->iv_bss->ni_authmode);
}
void
ieee80211_node_vdetach(struct ieee80211vap *vap)
{
struct ieee80211com *ic = vap->iv_ic;
ieee80211_node_table_reset(&ic->ic_sta, vap);
if (vap->iv_bss != NULL) {
ieee80211_free_node(vap->iv_bss);
vap->iv_bss = NULL;
}
if (vap->iv_aid_bitmap != NULL) {
free(vap->iv_aid_bitmap, M_80211_NODE);
vap->iv_aid_bitmap = NULL;
}
}
/*
* Port authorize/unauthorize interfaces for use by an authenticator.
*/
void
ieee80211_node_authorize(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
ni->ni_flags |= IEEE80211_NODE_AUTH;
ni->ni_inact_reload = vap->iv_inact_run;
ni->ni_inact = ni->ni_inact_reload;
IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni,
"%s: inact_reload %u", __func__, ni->ni_inact_reload);
}
void
ieee80211_node_unauthorize(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
ni->ni_flags &= ~IEEE80211_NODE_AUTH;
ni->ni_inact_reload = vap->iv_inact_auth;
if (ni->ni_inact > ni->ni_inact_reload)
ni->ni_inact = ni->ni_inact_reload;
IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni,
"%s: inact_reload %u inact %u", __func__,
ni->ni_inact_reload, ni->ni_inact);
}
/*
* Fix tx parameters for a node according to ``association state''.
*/
void
ieee80211_node_setuptxparms(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
enum ieee80211_phymode mode;
if (ni->ni_flags & IEEE80211_NODE_HT) {
if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan))
mode = IEEE80211_MODE_11NA;
else
mode = IEEE80211_MODE_11NG;
} else { /* legacy rate handling */
if (IEEE80211_IS_CHAN_ST(ni->ni_chan))
mode = IEEE80211_MODE_STURBO_A;
else if (IEEE80211_IS_CHAN_HALF(ni->ni_chan))
mode = IEEE80211_MODE_HALF;
else if (IEEE80211_IS_CHAN_QUARTER(ni->ni_chan))
mode = IEEE80211_MODE_QUARTER;
/* NB: 108A should be handled as 11a */
else if (IEEE80211_IS_CHAN_A(ni->ni_chan))
mode = IEEE80211_MODE_11A;
else if (IEEE80211_IS_CHAN_108G(ni->ni_chan) ||
(ni->ni_flags & IEEE80211_NODE_ERP))
mode = IEEE80211_MODE_11G;
else
mode = IEEE80211_MODE_11B;
}
ni->ni_txparms = &vap->iv_txparms[mode];
}
/*
* Set/change the channel. The rate set is also updated as
* to insure a consistent view by drivers.
* XXX should be private but hostap needs it to deal with CSA
*/
void
ieee80211_node_set_chan(struct ieee80211_node *ni,
struct ieee80211_channel *chan)
{
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211vap *vap = ni->ni_vap;
enum ieee80211_phymode mode;
KASSERT(chan != IEEE80211_CHAN_ANYC, ("no channel"));
ni->ni_chan = chan;
mode = ieee80211_chan2mode(chan);
if (IEEE80211_IS_CHAN_HT(chan)) {
/*
* We must install the legacy rate est in ni_rates and the
* HT rate set in ni_htrates.
*/
ni->ni_htrates = *ieee80211_get_suphtrates(ic, chan);
/*
* Setup bss tx parameters based on operating mode. We
* use legacy rates when operating in a mixed HT+non-HT bss
* and non-ERP rates in 11g for mixed ERP+non-ERP bss.
*/
if (mode == IEEE80211_MODE_11NA &&
(vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0)
mode = IEEE80211_MODE_11A;
else if (mode == IEEE80211_MODE_11NG &&
(vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0)
mode = IEEE80211_MODE_11G;
if (mode == IEEE80211_MODE_11G &&
(vap->iv_flags & IEEE80211_F_PUREG) == 0)
mode = IEEE80211_MODE_11B;
}
ni->ni_txparms = &vap->iv_txparms[mode];
ni->ni_rates = *ieee80211_get_suprates(ic, chan);
}
static __inline void
copy_bss(struct ieee80211_node *nbss, const struct ieee80211_node *obss)
{
/* propagate useful state */
nbss->ni_authmode = obss->ni_authmode;
nbss->ni_txpower = obss->ni_txpower;
nbss->ni_vlan = obss->ni_vlan;
/* XXX statistics? */
/* XXX legacy WDS bssid? */
}
void
ieee80211_create_ibss(struct ieee80211vap* vap, struct ieee80211_channel *chan)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN,
"%s: creating %s on channel %u\n", __func__,
ieee80211_opmode_name[vap->iv_opmode],
ieee80211_chan2ieee(ic, chan));
ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr);
if (ni == NULL) {
/* XXX recovery? */
return;
}
IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr);
ni->ni_esslen = vap->iv_des_ssid[0].len;
memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen);
if (vap->iv_bss != NULL)
copy_bss(ni, vap->iv_bss);
ni->ni_intval = ic->ic_bintval;
if (vap->iv_flags & IEEE80211_F_PRIVACY)
ni->ni_capinfo |= IEEE80211_CAPINFO_PRIVACY;
if (ic->ic_phytype == IEEE80211_T_FH) {
ni->ni_fhdwell = 200; /* XXX */
ni->ni_fhindex = 1;
}
if (vap->iv_opmode == IEEE80211_M_IBSS) {
vap->iv_flags |= IEEE80211_F_SIBSS;
ni->ni_capinfo |= IEEE80211_CAPINFO_IBSS; /* XXX */
if (vap->iv_flags & IEEE80211_F_DESBSSID)
IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid);
else {
get_random_bytes(ni->ni_bssid, IEEE80211_ADDR_LEN);
/* clear group bit, add local bit */
ni->ni_bssid[0] = (ni->ni_bssid[0] &~ 0x01) | 0x02;
}
} else if (vap->iv_opmode == IEEE80211_M_AHDEMO) {
if (vap->iv_flags & IEEE80211_F_DESBSSID)
IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid);
else
#ifdef IEEE80211_SUPPORT_TDMA
if ((vap->iv_caps & IEEE80211_C_TDMA) == 0)
#endif
memset(ni->ni_bssid, 0, IEEE80211_ADDR_LEN);
#ifdef IEEE80211_SUPPORT_MESH
} else if (vap->iv_opmode == IEEE80211_M_MBSS) {
ni->ni_meshidlen = vap->iv_mesh->ms_idlen;
memcpy(ni->ni_meshid, vap->iv_mesh->ms_id, ni->ni_meshidlen);
#endif
}
/*
* Fix the channel and related attributes.
*/
/* clear DFS CAC state on previous channel */
if (ic->ic_bsschan != IEEE80211_CHAN_ANYC &&
ic->ic_bsschan->ic_freq != chan->ic_freq &&
IEEE80211_IS_CHAN_CACDONE(ic->ic_bsschan))
ieee80211_dfs_cac_clear(ic, ic->ic_bsschan);
ic->ic_bsschan = chan;
ieee80211_node_set_chan(ni, chan);
ic->ic_curmode = ieee80211_chan2mode(chan);
/*
* Do mode-specific setup.
*/
if (IEEE80211_IS_CHAN_FULL(chan)) {
if (IEEE80211_IS_CHAN_ANYG(chan)) {
/*
* Use a mixed 11b/11g basic rate set.
*/
ieee80211_setbasicrates(&ni->ni_rates,
IEEE80211_MODE_11G);
if (vap->iv_flags & IEEE80211_F_PUREG) {
/*
* Also mark OFDM rates basic so 11b
* stations do not join (WiFi compliance).
*/
ieee80211_addbasicrates(&ni->ni_rates,
IEEE80211_MODE_11A);
}
} else if (IEEE80211_IS_CHAN_B(chan)) {
/*
* Force pure 11b rate set.
*/
ieee80211_setbasicrates(&ni->ni_rates,
IEEE80211_MODE_11B);
}
}
(void) ieee80211_sta_join1(ieee80211_ref_node(ni));
}
/*
* Reset bss state on transition to the INIT state.
* Clear any stations from the table (they have been
* deauth'd) and reset the bss node (clears key, rate
* etc. state).
*/
void
ieee80211_reset_bss(struct ieee80211vap *vap)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni, *obss;
ieee80211_node_table_reset(&ic->ic_sta, vap);
/* XXX multi-bss: wrong */
ieee80211_reset_erp(ic);
ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr);
KASSERT(ni != NULL, ("unable to setup initial BSS node"));
obss = vap->iv_bss;
vap->iv_bss = ieee80211_ref_node(ni);
if (obss != NULL) {
copy_bss(ni, obss);
ni->ni_intval = ic->ic_bintval;
ieee80211_free_node(obss);
} else
IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr);
}
static int
match_ssid(const struct ieee80211_node *ni,
int nssid, const struct ieee80211_scan_ssid ssids[])
{
int i;
for (i = 0; i < nssid; i++) {
if (ni->ni_esslen == ssids[i].len &&
memcmp(ni->ni_essid, ssids[i].ssid, ni->ni_esslen) == 0)
return 1;
}
return 0;
}
/*
* Test a node for suitability/compatibility.
*/
static int
check_bss(struct ieee80211vap *vap, struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
uint8_t rate;
if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan)))
return 0;
if (vap->iv_opmode == IEEE80211_M_IBSS) {
if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0)
return 0;
} else {
if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0)
return 0;
}
if (vap->iv_flags & IEEE80211_F_PRIVACY) {
if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0)
return 0;
} else {
/* XXX does this mean privacy is supported or required? */
if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY)
return 0;
}
rate = ieee80211_fix_rate(ni, &ni->ni_rates,
IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE);
if (rate & IEEE80211_RATE_BASIC)
return 0;
if (vap->iv_des_nssid != 0 &&
!match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid))
return 0;
if ((vap->iv_flags & IEEE80211_F_DESBSSID) &&
!IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid))
return 0;
return 1;
}
#ifdef IEEE80211_DEBUG
/*
* Display node suitability/compatibility.
*/
static void
check_bss_debug(struct ieee80211vap *vap, struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
uint8_t rate;
int fail;
fail = 0;
if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan)))
fail |= 0x01;
if (vap->iv_opmode == IEEE80211_M_IBSS) {
if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0)
fail |= 0x02;
} else {
if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0)
fail |= 0x02;
}
if (vap->iv_flags & IEEE80211_F_PRIVACY) {
if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0)
fail |= 0x04;
} else {
/* XXX does this mean privacy is supported or required? */
if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY)
fail |= 0x04;
}
rate = ieee80211_fix_rate(ni, &ni->ni_rates,
IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE);
if (rate & IEEE80211_RATE_BASIC)
fail |= 0x08;
if (vap->iv_des_nssid != 0 &&
!match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid))
fail |= 0x10;
if ((vap->iv_flags & IEEE80211_F_DESBSSID) &&
!IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid))
fail |= 0x20;
printf(" %c %s", fail ? '-' : '+', ether_sprintf(ni->ni_macaddr));
printf(" %s%c", ether_sprintf(ni->ni_bssid), fail & 0x20 ? '!' : ' ');
printf(" %3d%c",
ieee80211_chan2ieee(ic, ni->ni_chan), fail & 0x01 ? '!' : ' ');
printf(" %2dM%c", (rate & IEEE80211_RATE_VAL) / 2,
fail & 0x08 ? '!' : ' ');
printf(" %4s%c",
(ni->ni_capinfo & IEEE80211_CAPINFO_ESS) ? "ess" :
(ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) ? "ibss" :
"????",
fail & 0x02 ? '!' : ' ');
printf(" %3s%c ",
(ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) ? "wep" : "no",
fail & 0x04 ? '!' : ' ');
ieee80211_print_essid(ni->ni_essid, ni->ni_esslen);
printf("%s\n", fail & 0x10 ? "!" : "");
}
#endif /* IEEE80211_DEBUG */
/*
* Handle 802.11 ad hoc network merge. The
* convention, set by the Wireless Ethernet Compatibility Alliance
* (WECA), is that an 802.11 station will change its BSSID to match
* the "oldest" 802.11 ad hoc network, on the same channel, that
* has the station's desired SSID. The "oldest" 802.11 network
* sends beacons with the greatest TSF timestamp.
*
* The caller is assumed to validate TSF's before attempting a merge.
*
* Return !0 if the BSSID changed, 0 otherwise.
*/
int
ieee80211_ibss_merge(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
#ifdef IEEE80211_DEBUG
struct ieee80211com *ic = ni->ni_ic;
#endif
if (ni == vap->iv_bss ||
IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid)) {
/* unchanged, nothing to do */
return 0;
}
if (!check_bss(vap, ni)) {
/* capabilities mismatch */
IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC,
"%s: merge failed, capabilities mismatch\n", __func__);
#ifdef IEEE80211_DEBUG
if (ieee80211_msg_assoc(vap))
check_bss_debug(vap, ni);
#endif
vap->iv_stats.is_ibss_capmismatch++;
return 0;
}
IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC,
"%s: new bssid %s: %s preamble, %s slot time%s\n", __func__,
ether_sprintf(ni->ni_bssid),
ic->ic_flags&IEEE80211_F_SHPREAMBLE ? "short" : "long",
ic->ic_flags&IEEE80211_F_SHSLOT ? "short" : "long",
ic->ic_flags&IEEE80211_F_USEPROT ? ", protection" : ""
);
return ieee80211_sta_join1(ieee80211_ref_node(ni));
}
/*
* Calculate HT channel promotion flags for all vaps.
* This assumes ni_chan have been setup for each vap.
*/
static int
gethtadjustflags(struct ieee80211com *ic)
{
struct ieee80211vap *vap;
int flags;
flags = 0;
/* XXX locking */
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) {
if (vap->iv_state < IEEE80211_S_RUN)
continue;
switch (vap->iv_opmode) {
case IEEE80211_M_WDS:
case IEEE80211_M_STA:
case IEEE80211_M_AHDEMO:
case IEEE80211_M_HOSTAP:
case IEEE80211_M_IBSS:
case IEEE80211_M_MBSS:
flags |= ieee80211_htchanflags(vap->iv_bss->ni_chan);
break;
default:
break;
}
}
return flags;
}
/*
* Check if the current channel needs to change based on whether
* any vap's are using HT20/HT40. This is used to sync the state
* of ic_curchan after a channel width change on a running vap.
*/
void
ieee80211_sync_curchan(struct ieee80211com *ic)
{
struct ieee80211_channel *c;
c = ieee80211_ht_adjust_channel(ic, ic->ic_curchan, gethtadjustflags(ic));
if (c != ic->ic_curchan) {
ic->ic_curchan = c;
ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan);
ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan);
IEEE80211_UNLOCK(ic);
ic->ic_set_channel(ic);
ieee80211_radiotap_chan_change(ic);
IEEE80211_LOCK(ic);
}
}
/*
* Setup the current channel. The request channel may be
* promoted if other vap's are operating with HT20/HT40.
*/
void
ieee80211_setupcurchan(struct ieee80211com *ic, struct ieee80211_channel *c)
{
if (ic->ic_htcaps & IEEE80211_HTC_HT) {
int flags = gethtadjustflags(ic);
/*
* Check for channel promotion required to support the
* set of running vap's. This assumes we are called
* after ni_chan is setup for each vap.
*/
/* NB: this assumes IEEE80211_FHT_USEHT40 > IEEE80211_FHT_HT */
if (flags > ieee80211_htchanflags(c))
c = ieee80211_ht_adjust_channel(ic, c, flags);
}
ic->ic_bsschan = ic->ic_curchan = c;
ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan);
ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan);
}
/*
* Change the current channel. The channel change is guaranteed to have
* happened before the next state change.
*/
void
ieee80211_setcurchan(struct ieee80211com *ic, struct ieee80211_channel *c)
{
ieee80211_setupcurchan(ic, c);
ieee80211_runtask(ic, &ic->ic_chan_task);
}
void
ieee80211_update_chw(struct ieee80211com *ic)
{
ieee80211_setupcurchan(ic, ic->ic_curchan);
ieee80211_runtask(ic, &ic->ic_chw_task);
}
/*
* Join the specified IBSS/BSS network. The node is assumed to
* be passed in with a held reference.
*/
static int
ieee80211_sta_join1(struct ieee80211_node *selbs)
{
struct ieee80211vap *vap = selbs->ni_vap;
struct ieee80211com *ic = selbs->ni_ic;
struct ieee80211_node *obss;
int canreassoc;
/*
* Committed to selbs, setup state.
*/
obss = vap->iv_bss;
/*
* Check if old+new node have the same address in which
* case we can reassociate when operating in sta mode.
*/
canreassoc = (obss != NULL &&
vap->iv_state == IEEE80211_S_RUN &&
IEEE80211_ADDR_EQ(obss->ni_macaddr, selbs->ni_macaddr));
vap->iv_bss = selbs; /* NB: caller assumed to bump refcnt */
if (obss != NULL) {
struct ieee80211_node_table *nt = obss->ni_table;
copy_bss(selbs, obss);
ieee80211_node_decref(obss); /* iv_bss reference */
IEEE80211_NODE_LOCK(nt);
node_reclaim(nt, obss); /* station table reference */
IEEE80211_NODE_UNLOCK(nt);
obss = NULL; /* NB: guard against later use */
}
/*
* Delete unusable rates; we've already checked
* that the negotiated rate set is acceptable.
*/
ieee80211_fix_rate(vap->iv_bss, &vap->iv_bss->ni_rates,
IEEE80211_F_DODEL | IEEE80211_F_JOIN);
ieee80211_setcurchan(ic, selbs->ni_chan);
/*
* Set the erp state (mostly the slot time) to deal with
* the auto-select case; this should be redundant if the
* mode is locked.
*/
ieee80211_reset_erp(ic);
ieee80211_wme_initparams(vap);
if (vap->iv_opmode == IEEE80211_M_STA) {
if (canreassoc) {
/* Reassociate */
ieee80211_new_state(vap, IEEE80211_S_ASSOC, 1);
} else {
/*
* Act as if we received a DEAUTH frame in case we
* are invoked from the RUN state. This will cause
* us to try to re-authenticate if we are operating
* as a station.
*/
ieee80211_new_state(vap, IEEE80211_S_AUTH,
IEEE80211_FC0_SUBTYPE_DEAUTH);
}
} else
ieee80211_new_state(vap, IEEE80211_S_RUN, -1);
return 1;
}
int
ieee80211_sta_join(struct ieee80211vap *vap, struct ieee80211_channel *chan,
const struct ieee80211_scan_entry *se)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
ni = ieee80211_alloc_node(&ic->ic_sta, vap, se->se_macaddr);
if (ni == NULL) {
/* XXX msg */
return 0;
}
/*
* Expand scan state into node's format.
* XXX may not need all this stuff
*/
IEEE80211_ADDR_COPY(ni->ni_bssid, se->se_bssid);
ni->ni_esslen = se->se_ssid[1];
memcpy(ni->ni_essid, se->se_ssid+2, ni->ni_esslen);
ni->ni_tstamp.tsf = se->se_tstamp.tsf;
ni->ni_intval = se->se_intval;
ni->ni_capinfo = se->se_capinfo;
ni->ni_chan = chan;
ni->ni_timoff = se->se_timoff;
ni->ni_fhdwell = se->se_fhdwell;
ni->ni_fhindex = se->se_fhindex;
ni->ni_erp = se->se_erp;
IEEE80211_RSSI_LPF(ni->ni_avgrssi, se->se_rssi);
ni->ni_noise = se->se_noise;
if (vap->iv_opmode == IEEE80211_M_STA) {
/* NB: only infrastructure mode requires an associd */
ni->ni_flags |= IEEE80211_NODE_ASSOCID;
}
if (ieee80211_ies_init(&ni->ni_ies, se->se_ies.data, se->se_ies.len)) {
ieee80211_ies_expand(&ni->ni_ies);
#ifdef IEEE80211_SUPPORT_SUPERG
if (ni->ni_ies.ath_ie != NULL)
ieee80211_parse_ath(ni, ni->ni_ies.ath_ie);
#endif
if (ni->ni_ies.htcap_ie != NULL)
ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie);
if (ni->ni_ies.htinfo_ie != NULL)
ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie);
#ifdef IEEE80211_SUPPORT_MESH
if (ni->ni_ies.meshid_ie != NULL)
ieee80211_parse_meshid(ni, ni->ni_ies.meshid_ie);
#endif
#ifdef IEEE80211_SUPPORT_TDMA
if (ni->ni_ies.tdma_ie != NULL)
ieee80211_parse_tdma(ni, ni->ni_ies.tdma_ie);
#endif
}
vap->iv_dtim_period = se->se_dtimperiod;
vap->iv_dtim_count = 0;
/* NB: must be after ni_chan is setup */
ieee80211_setup_rates(ni, se->se_rates, se->se_xrates,
IEEE80211_F_DOSORT);
if (ieee80211_iserp_rateset(&ni->ni_rates))
ni->ni_flags |= IEEE80211_NODE_ERP;
/*
* Setup HT state for this node if it's available, otherwise
* non-STA modes won't pick this state up.
*
* For IBSS and related modes that don't go through an
* association request/response, the only appropriate place
* to setup the HT state is here.
*/
if (ni->ni_ies.htinfo_ie != NULL &&
ni->ni_ies.htcap_ie != NULL &&
vap->iv_flags_ht & IEEE80211_FHT_HT) {
ieee80211_ht_node_init(ni);
ieee80211_ht_updateparams(ni,
ni->ni_ies.htcap_ie,
ni->ni_ies.htinfo_ie);
ieee80211_setup_htrates(ni, ni->ni_ies.htcap_ie,
IEEE80211_F_JOIN | IEEE80211_F_DOBRS);
ieee80211_setup_basic_htrates(ni, ni->ni_ies.htinfo_ie);
}
/* XXX else check for ath FF? */
/* XXX QoS? Difficult given that WME config is specific to a master */
ieee80211_node_setuptxparms(ni);
ieee80211_ratectl_node_init(ni);
return ieee80211_sta_join1(ieee80211_ref_node(ni));
}
/*
* Leave the specified IBSS/BSS network. The node is assumed to
* be passed in with a held reference.
*/
void
ieee80211_sta_leave(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
ic->ic_node_cleanup(ni);
ieee80211_notify_node_leave(ni);
}
/*
* Send a deauthenticate frame and drop the station.
*/
void
ieee80211_node_deauth(struct ieee80211_node *ni, int reason)
{
/* NB: bump the refcnt to be sure temporary nodes are not reclaimed */
ieee80211_ref_node(ni);
if (ni->ni_associd != 0)
IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DEAUTH, reason);
ieee80211_node_leave(ni);
ieee80211_free_node(ni);
}
static struct ieee80211_node *
node_alloc(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN])
{
struct ieee80211_node *ni;
ni = (struct ieee80211_node *) malloc(sizeof(struct ieee80211_node),
M_80211_NODE, M_NOWAIT | M_ZERO);
return ni;
}
/*
* Initialize an ie blob with the specified data. If previous
* data exists re-use the data block. As a side effect we clear
* all references to specific ie's; the caller is required to
* recalculate them.
*/
int
ieee80211_ies_init(struct ieee80211_ies *ies, const uint8_t *data, int len)
{
/* NB: assumes data+len are the last fields */
memset(ies, 0, offsetof(struct ieee80211_ies, data));
if (ies->data != NULL && ies->len != len) {
/* data size changed */
free(ies->data, M_80211_NODE_IE);
ies->data = NULL;
}
if (ies->data == NULL) {
ies->data = (uint8_t *) malloc(len, M_80211_NODE_IE, M_NOWAIT);
if (ies->data == NULL) {
ies->len = 0;
/* NB: pointers have already been zero'd above */
return 0;
}
}
memcpy(ies->data, data, len);
ies->len = len;
return 1;
}
/*
* Reclaim storage for an ie blob.
*/
void
ieee80211_ies_cleanup(struct ieee80211_ies *ies)
{
if (ies->data != NULL)
free(ies->data, M_80211_NODE_IE);
}
/*
* Expand an ie blob data contents and to fillin individual
* ie pointers. The data blob is assumed to be well-formed;
* we don't do any validity checking of ie lengths.
*/
void
ieee80211_ies_expand(struct ieee80211_ies *ies)
{
uint8_t *ie;
int ielen;
ie = ies->data;
ielen = ies->len;
while (ielen > 0) {
switch (ie[0]) {
case IEEE80211_ELEMID_VENDOR:
if (iswpaoui(ie))
ies->wpa_ie = ie;
else if (iswmeoui(ie))
ies->wme_ie = ie;
#ifdef IEEE80211_SUPPORT_SUPERG
else if (isatherosoui(ie))
ies->ath_ie = ie;
#endif
#ifdef IEEE80211_SUPPORT_TDMA
else if (istdmaoui(ie))
ies->tdma_ie = ie;
#endif
break;
case IEEE80211_ELEMID_RSN:
ies->rsn_ie = ie;
break;
case IEEE80211_ELEMID_HTCAP:
ies->htcap_ie = ie;
break;
case IEEE80211_ELEMID_HTINFO:
ies->htinfo_ie = ie;
break;
#ifdef IEEE80211_SUPPORT_MESH
case IEEE80211_ELEMID_MESHID:
ies->meshid_ie = ie;
break;
#endif
}
ielen -= 2 + ie[1];
ie += 2 + ie[1];
}
}
/*
* Reclaim any resources in a node and reset any critical
* state. Typically nodes are free'd immediately after,
* but in some cases the storage may be reused so we need
* to insure consistent state (should probably fix that).
*/
static void
node_cleanup(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
int i;
/* NB: preserve ni_table */
if (ni->ni_flags & IEEE80211_NODE_PWR_MGT) {
if (vap->iv_opmode != IEEE80211_M_STA)
vap->iv_ps_sta--;
ni->ni_flags &= ~IEEE80211_NODE_PWR_MGT;
IEEE80211_NOTE(vap, IEEE80211_MSG_POWER, ni,
"power save mode off, %u sta's in ps mode", vap->iv_ps_sta);
}
/*
* Cleanup any HT-related state.
*/
if (ni->ni_flags & IEEE80211_NODE_HT)
ieee80211_ht_node_cleanup(ni);
#ifdef IEEE80211_SUPPORT_SUPERG
else if (ni->ni_ath_flags & IEEE80211_NODE_ATH)
ieee80211_ff_node_cleanup(ni);
#endif
#ifdef IEEE80211_SUPPORT_MESH
/*
* Cleanup any mesh-related state.
*/
if (vap->iv_opmode == IEEE80211_M_MBSS)
ieee80211_mesh_node_cleanup(ni);
#endif
/*
* Clear any staging queue entries.
*/
ieee80211_ageq_drain_node(&ic->ic_stageq, ni);
/*
* Clear AREF flag that marks the authorization refcnt bump
* has happened. This is probably not needed as the node
* should always be removed from the table so not found but
* do it just in case.
* Likewise clear the ASSOCID flag as these flags are intended
* to be managed in tandem.
*/
ni->ni_flags &= ~(IEEE80211_NODE_AREF | IEEE80211_NODE_ASSOCID);
/*
* Drain power save queue and, if needed, clear TIM.
*/
if (ieee80211_node_psq_drain(ni) != 0 && vap->iv_set_tim != NULL)
vap->iv_set_tim(ni, 0);
ni->ni_associd = 0;
if (ni->ni_challenge != NULL) {
free(ni->ni_challenge, M_80211_NODE);
ni->ni_challenge = NULL;
}
/*
* Preserve SSID, WPA, and WME ie's so the bss node is
* reusable during a re-auth/re-assoc state transition.
* If we remove these data they will not be recreated
* because they come from a probe-response or beacon frame
* which cannot be expected prior to the association-response.
* This should not be an issue when operating in other modes
* as stations leaving always go through a full state transition
* which will rebuild this state.
*
* XXX does this leave us open to inheriting old state?
*/
for (i = 0; i < nitems(ni->ni_rxfrag); i++)
if (ni->ni_rxfrag[i] != NULL) {
m_freem(ni->ni_rxfrag[i]);
ni->ni_rxfrag[i] = NULL;
}
/*
* Must be careful here to remove any key map entry w/o a LOR.
*/
ieee80211_node_delucastkey(ni);
}
static void
node_free(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
ieee80211_ratectl_node_deinit(ni);
ic->ic_node_cleanup(ni);
ieee80211_ies_cleanup(&ni->ni_ies);
ieee80211_psq_cleanup(&ni->ni_psq);
free(ni, M_80211_NODE);
}
static void
node_age(struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
IEEE80211_NODE_LOCK_ASSERT(&vap->iv_ic->ic_sta);
/*
* Age frames on the power save queue.
*/
if (ieee80211_node_psq_age(ni) != 0 &&
ni->ni_psq.psq_len == 0 && vap->iv_set_tim != NULL)
vap->iv_set_tim(ni, 0);
/*
* Age out HT resources (e.g. frames on the
* A-MPDU reorder queues).
*/
if (ni->ni_associd != 0 && (ni->ni_flags & IEEE80211_NODE_HT))
ieee80211_ht_node_age(ni);
}
static int8_t
node_getrssi(const struct ieee80211_node *ni)
{
uint32_t avgrssi = ni->ni_avgrssi;
int32_t rssi;
if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER)
return 0;
rssi = IEEE80211_RSSI_GET(avgrssi);
return rssi < 0 ? 0 : rssi > 127 ? 127 : rssi;
}
static void
node_getsignal(const struct ieee80211_node *ni, int8_t *rssi, int8_t *noise)
{
*rssi = node_getrssi(ni);
*noise = ni->ni_noise;
}
static void
node_getmimoinfo(const struct ieee80211_node *ni,
struct ieee80211_mimo_info *info)
{
int i;
uint32_t avgrssi;
int32_t rssi;
bzero(info, sizeof(*info));
for (i = 0; i < ni->ni_mimo_chains; i++) {
avgrssi = ni->ni_mimo_rssi_ctl[i];
if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER) {
info->rssi[i] = 0;
} else {
rssi = IEEE80211_RSSI_GET(avgrssi);
info->rssi[i] = rssi < 0 ? 0 : rssi > 127 ? 127 : rssi;
}
info->noise[i] = ni->ni_mimo_noise_ctl[i];
}
/* XXX ext radios? */
/* XXX EVM? */
}
struct ieee80211_node *
ieee80211_alloc_node(struct ieee80211_node_table *nt,
struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN])
{
struct ieee80211com *ic = nt->nt_ic;
struct ieee80211_node *ni;
int hash;
ni = ic->ic_node_alloc(vap, macaddr);
if (ni == NULL) {
vap->iv_stats.is_rx_nodealloc++;
return NULL;
}
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
"%s %p<%s> in %s table\n", __func__, ni,
ether_sprintf(macaddr), nt->nt_name);
IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr);
hash = IEEE80211_NODE_HASH(ic, macaddr);
ieee80211_node_initref(ni); /* mark referenced */
ni->ni_chan = IEEE80211_CHAN_ANYC;
ni->ni_authmode = IEEE80211_AUTH_OPEN;
ni->ni_txpower = ic->ic_txpowlimit; /* max power */
ni->ni_txparms = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)];
ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey, IEEE80211_KEYIX_NONE);
ni->ni_avgrssi = IEEE80211_RSSI_DUMMY_MARKER;
ni->ni_inact_reload = nt->nt_inact_init;
ni->ni_inact = ni->ni_inact_reload;
ni->ni_ath_defkeyix = 0x7fff;
ieee80211_psq_init(&ni->ni_psq, "unknown");
#ifdef IEEE80211_SUPPORT_MESH
if (vap->iv_opmode == IEEE80211_M_MBSS)
ieee80211_mesh_node_init(vap, ni);
#endif
IEEE80211_NODE_LOCK(nt);
TAILQ_INSERT_TAIL(&nt->nt_node, ni, ni_list);
LIST_INSERT_HEAD(&nt->nt_hash[hash], ni, ni_hash);
ni->ni_table = nt;
ni->ni_vap = vap;
ni->ni_ic = ic;
IEEE80211_NODE_UNLOCK(nt);
IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni,
"%s: inact_reload %u", __func__, ni->ni_inact_reload);
ieee80211_ratectl_node_init(ni);
return ni;
}
/*
* Craft a temporary node suitable for sending a management frame
* to the specified station. We craft only as much state as we
* need to do the work since the node will be immediately reclaimed
* once the send completes.
*/
struct ieee80211_node *
ieee80211_tmp_node(struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
ni = ic->ic_node_alloc(vap, macaddr);
if (ni != NULL) {
struct ieee80211_node *bss = vap->iv_bss;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
"%s %p<%s>\n", __func__, ni, ether_sprintf(macaddr));
ni->ni_table = NULL; /* NB: pedantic */
ni->ni_ic = ic; /* NB: needed to set channel */
ni->ni_vap = vap;
IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr);
IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid);
ieee80211_node_initref(ni); /* mark referenced */
/* NB: required by ieee80211_fix_rate */
ieee80211_node_set_chan(ni, bss->ni_chan);
ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey,
IEEE80211_KEYIX_NONE);
ni->ni_txpower = bss->ni_txpower;
/* XXX optimize away */
ieee80211_psq_init(&ni->ni_psq, "unknown");
ieee80211_ratectl_node_init(ni);
} else {
/* XXX msg */
vap->iv_stats.is_rx_nodealloc++;
}
return ni;
}
struct ieee80211_node *
ieee80211_dup_bss(struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
ni = ieee80211_alloc_node(&ic->ic_sta, vap, macaddr);
if (ni != NULL) {
struct ieee80211_node *bss = vap->iv_bss;
/*
* Inherit from iv_bss.
*/
copy_bss(ni, bss);
IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid);
ieee80211_node_set_chan(ni, bss->ni_chan);
}
return ni;
}
/*
* Create a bss node for a legacy WDS vap. The far end does
* not associate so we just create create a new node and
* simulate an association. The caller is responsible for
* installing the node as the bss node and handling any further
* setup work like authorizing the port.
*/
struct ieee80211_node *
ieee80211_node_create_wds(struct ieee80211vap *vap,
const uint8_t bssid[IEEE80211_ADDR_LEN], struct ieee80211_channel *chan)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni;
/* XXX check if node already in sta table? */
ni = ieee80211_alloc_node(&ic->ic_sta, vap, bssid);
if (ni != NULL) {
ni->ni_wdsvap = vap;
IEEE80211_ADDR_COPY(ni->ni_bssid, bssid);
/*
* Inherit any manually configured settings.
*/
copy_bss(ni, vap->iv_bss);
ieee80211_node_set_chan(ni, chan);
/* NB: propagate ssid so available to WPA supplicant */
ni->ni_esslen = vap->iv_des_ssid[0].len;
memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen);
/* NB: no associd for peer */
/*
* There are no management frames to use to
* discover neighbor capabilities, so blindly
* propagate the local configuration.
*/
if (vap->iv_flags & IEEE80211_F_WME)
ni->ni_flags |= IEEE80211_NODE_QOS;
#ifdef IEEE80211_SUPPORT_SUPERG
if (vap->iv_flags & IEEE80211_F_FF)
ni->ni_flags |= IEEE80211_NODE_FF;
#endif
if ((ic->ic_htcaps & IEEE80211_HTC_HT) &&
(vap->iv_flags_ht & IEEE80211_FHT_HT)) {
/*
* Device is HT-capable and HT is enabled for
* the vap; setup HT operation. On return
* ni_chan will be adjusted to an HT channel.
*/
ieee80211_ht_wds_init(ni);
} else {
struct ieee80211_channel *c = ni->ni_chan;
/*
* Force a legacy channel to be used.
*/
c = ieee80211_find_channel(ic,
c->ic_freq, c->ic_flags &~ IEEE80211_CHAN_HT);
KASSERT(c != NULL, ("no legacy channel, %u/%x",
ni->ni_chan->ic_freq, ni->ni_chan->ic_flags));
ni->ni_chan = c;
}
}
return ni;
}
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_node_locked_debug(struct ieee80211_node_table *nt,
const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line)
#else
ieee80211_find_node_locked(struct ieee80211_node_table *nt,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
#endif
{
struct ieee80211_node *ni;
int hash;
IEEE80211_NODE_LOCK_ASSERT(nt);
hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr);
LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) {
if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
ieee80211_ref_node(ni); /* mark referenced */
#ifdef IEEE80211_DEBUG_REFCNT
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
"%s (%s:%u) %p<%s> refcnt %d\n", __func__,
func, line,
ni, ether_sprintf(ni->ni_macaddr),
ieee80211_node_refcnt(ni));
#endif
return ni;
}
}
return NULL;
}
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_node_debug(struct ieee80211_node_table *nt,
const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line)
#else
ieee80211_find_node(struct ieee80211_node_table *nt,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
#endif
{
struct ieee80211_node *ni;
IEEE80211_NODE_LOCK(nt);
ni = ieee80211_find_node_locked(nt, macaddr);
IEEE80211_NODE_UNLOCK(nt);
return ni;
}
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_vap_node_locked_debug(struct ieee80211_node_table *nt,
const struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line)
#else
ieee80211_find_vap_node_locked(struct ieee80211_node_table *nt,
const struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
#endif
{
struct ieee80211_node *ni;
int hash;
IEEE80211_NODE_LOCK_ASSERT(nt);
hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr);
LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) {
if (ni->ni_vap == vap &&
IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
ieee80211_ref_node(ni); /* mark referenced */
#ifdef IEEE80211_DEBUG_REFCNT
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
"%s (%s:%u) %p<%s> refcnt %d\n", __func__,
func, line,
ni, ether_sprintf(ni->ni_macaddr),
ieee80211_node_refcnt(ni));
#endif
return ni;
}
}
return NULL;
}
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_vap_node_debug(struct ieee80211_node_table *nt,
const struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line)
#else
ieee80211_find_vap_node(struct ieee80211_node_table *nt,
const struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
#endif
{
struct ieee80211_node *ni;
IEEE80211_NODE_LOCK(nt);
ni = ieee80211_find_vap_node_locked(nt, vap, macaddr);
IEEE80211_NODE_UNLOCK(nt);
return ni;
}
/*
* Fake up a node; this handles node discovery in adhoc mode.
* Note that for the driver's benefit we we treat this like
* an association so the driver has an opportunity to setup
* it's private state.
*/
struct ieee80211_node *
ieee80211_fakeup_adhoc_node(struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
{
struct ieee80211_node *ni;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE | IEEE80211_MSG_ASSOC,
"%s: mac<%s>\n", __func__, ether_sprintf(macaddr));
ni = ieee80211_dup_bss(vap, macaddr);
if (ni != NULL) {
struct ieee80211com *ic = vap->iv_ic;
/* XXX no rate negotiation; just dup */
ni->ni_rates = vap->iv_bss->ni_rates;
if (ieee80211_iserp_rateset(&ni->ni_rates))
ni->ni_flags |= IEEE80211_NODE_ERP;
if (vap->iv_opmode == IEEE80211_M_AHDEMO) {
/*
* In adhoc demo mode there are no management
* frames to use to discover neighbor capabilities,
* so blindly propagate the local configuration
* so we can do interesting things (e.g. use
* WME to disable ACK's).
*/
if (vap->iv_flags & IEEE80211_F_WME)
ni->ni_flags |= IEEE80211_NODE_QOS;
#ifdef IEEE80211_SUPPORT_SUPERG
if (vap->iv_flags & IEEE80211_F_FF)
ni->ni_flags |= IEEE80211_NODE_FF;
#endif
}
ieee80211_node_setuptxparms(ni);
ieee80211_ratectl_node_init(ni);
if (ic->ic_newassoc != NULL)
ic->ic_newassoc(ni, 1);
/* XXX not right for 802.1x/WPA */
ieee80211_node_authorize(ni);
}
return ni;
}
void
ieee80211_init_neighbor(struct ieee80211_node *ni,
const struct ieee80211_frame *wh,
const struct ieee80211_scanparams *sp)
{
int do_ht_setup = 0;
ni->ni_esslen = sp->ssid[1];
memcpy(ni->ni_essid, sp->ssid + 2, sp->ssid[1]);
IEEE80211_ADDR_COPY(ni->ni_bssid, wh->i_addr3);
memcpy(ni->ni_tstamp.data, sp->tstamp, sizeof(ni->ni_tstamp));
ni->ni_intval = sp->bintval;
ni->ni_capinfo = sp->capinfo;
ni->ni_chan = ni->ni_ic->ic_curchan;
ni->ni_fhdwell = sp->fhdwell;
ni->ni_fhindex = sp->fhindex;
ni->ni_erp = sp->erp;
ni->ni_timoff = sp->timoff;
#ifdef IEEE80211_SUPPORT_MESH
if (ni->ni_vap->iv_opmode == IEEE80211_M_MBSS)
ieee80211_mesh_init_neighbor(ni, wh, sp);
#endif
if (ieee80211_ies_init(&ni->ni_ies, sp->ies, sp->ies_len)) {
ieee80211_ies_expand(&ni->ni_ies);
if (ni->ni_ies.wme_ie != NULL)
ni->ni_flags |= IEEE80211_NODE_QOS;
else
ni->ni_flags &= ~IEEE80211_NODE_QOS;
#ifdef IEEE80211_SUPPORT_SUPERG
if (ni->ni_ies.ath_ie != NULL)
ieee80211_parse_ath(ni, ni->ni_ies.ath_ie);
#endif
if (ni->ni_ies.htcap_ie != NULL)
ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie);
if (ni->ni_ies.htinfo_ie != NULL)
ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie);
if ((ni->ni_ies.htcap_ie != NULL) &&
(ni->ni_ies.htinfo_ie != NULL) &&
(ni->ni_vap->iv_flags_ht & IEEE80211_FHT_HT)) {
do_ht_setup = 1;
}
}
/* NB: must be after ni_chan is setup */
ieee80211_setup_rates(ni, sp->rates, sp->xrates,
IEEE80211_F_DOSORT | IEEE80211_F_DOFRATE |
IEEE80211_F_DONEGO | IEEE80211_F_DODEL);
/*
* If the neighbor is HT compatible, flip that on.
*/
if (do_ht_setup) {
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC,
"%s: doing HT setup\n", __func__);
ieee80211_ht_node_init(ni);
ieee80211_ht_updateparams(ni,
ni->ni_ies.htcap_ie,
ni->ni_ies.htinfo_ie);
ieee80211_setup_htrates(ni,
ni->ni_ies.htcap_ie,
IEEE80211_F_JOIN | IEEE80211_F_DOBRS);
ieee80211_setup_basic_htrates(ni,
ni->ni_ies.htinfo_ie);
ieee80211_node_setuptxparms(ni);
ieee80211_ratectl_node_init(ni);
}
}
/*
* Do node discovery in adhoc mode on receipt of a beacon
* or probe response frame. Note that for the driver's
* benefit we we treat this like an association so the
* driver has an opportunity to setup it's private state.
*/
struct ieee80211_node *
ieee80211_add_neighbor(struct ieee80211vap *vap,
const struct ieee80211_frame *wh,
const struct ieee80211_scanparams *sp)
{
struct ieee80211_node *ni;
IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC,
"%s: mac<%s>\n", __func__, ether_sprintf(wh->i_addr2));
ni = ieee80211_dup_bss(vap, wh->i_addr2);/* XXX alloc_node? */
if (ni != NULL) {
struct ieee80211com *ic = vap->iv_ic;
ieee80211_init_neighbor(ni, wh, sp);
if (ieee80211_iserp_rateset(&ni->ni_rates))
ni->ni_flags |= IEEE80211_NODE_ERP;
ieee80211_node_setuptxparms(ni);
ieee80211_ratectl_node_init(ni);
if (ic->ic_newassoc != NULL)
ic->ic_newassoc(ni, 1);
/* XXX not right for 802.1x/WPA */
ieee80211_node_authorize(ni);
}
return ni;
}
#define IS_PROBEREQ(wh) \
((wh->i_fc[0] & (IEEE80211_FC0_TYPE_MASK|IEEE80211_FC0_SUBTYPE_MASK)) \
== (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ))
#define IS_BCAST_PROBEREQ(wh) \
(IS_PROBEREQ(wh) && IEEE80211_IS_MULTICAST( \
((const struct ieee80211_frame *)(wh))->i_addr3))
static __inline struct ieee80211_node *
_find_rxnode(struct ieee80211_node_table *nt,
const struct ieee80211_frame_min *wh)
{
if (IS_BCAST_PROBEREQ(wh))
return NULL; /* spam bcast probe req to all vap's */
return ieee80211_find_node_locked(nt, wh->i_addr2);
}
/*
* Locate the node for sender, track state, and then pass the
* (referenced) node up to the 802.11 layer for its use. Note
* we can return NULL if the sender is not in the table.
*/
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_rxnode_debug(struct ieee80211com *ic,
const struct ieee80211_frame_min *wh, const char *func, int line)
#else
ieee80211_find_rxnode(struct ieee80211com *ic,
const struct ieee80211_frame_min *wh)
#endif
{
struct ieee80211_node_table *nt;
struct ieee80211_node *ni;
nt = &ic->ic_sta;
IEEE80211_NODE_LOCK(nt);
ni = _find_rxnode(nt, wh);
IEEE80211_NODE_UNLOCK(nt);
return ni;
}
/*
* Like ieee80211_find_rxnode but use the supplied h/w
* key index as a hint to locate the node in the key
* mapping table. If an entry is present at the key
* index we return it; otherwise do a normal lookup and
* update the mapping table if the station has a unicast
* key assigned to it.
*/
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_rxnode_withkey_debug(struct ieee80211com *ic,
const struct ieee80211_frame_min *wh, ieee80211_keyix keyix,
const char *func, int line)
#else
ieee80211_find_rxnode_withkey(struct ieee80211com *ic,
const struct ieee80211_frame_min *wh, ieee80211_keyix keyix)
#endif
{
struct ieee80211_node_table *nt;
struct ieee80211_node *ni;
nt = &ic->ic_sta;
IEEE80211_NODE_LOCK(nt);
if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax)
ni = nt->nt_keyixmap[keyix];
else
ni = NULL;
if (ni == NULL) {
ni = _find_rxnode(nt, wh);
if (ni != NULL && nt->nt_keyixmap != NULL) {
/*
* If the station has a unicast key cache slot
* assigned update the key->node mapping table.
*/
keyix = ni->ni_ucastkey.wk_rxkeyix;
/* XXX can keyixmap[keyix] != NULL? */
if (keyix < nt->nt_keyixmax &&
nt->nt_keyixmap[keyix] == NULL) {
IEEE80211_DPRINTF(ni->ni_vap,
IEEE80211_MSG_NODE,
"%s: add key map entry %p<%s> refcnt %d\n",
__func__, ni, ether_sprintf(ni->ni_macaddr),
ieee80211_node_refcnt(ni)+1);
nt->nt_keyixmap[keyix] = ieee80211_ref_node(ni);
}
}
} else {
if (IS_BCAST_PROBEREQ(wh))
ni = NULL; /* spam bcast probe req to all vap's */
else
ieee80211_ref_node(ni);
}
IEEE80211_NODE_UNLOCK(nt);
return ni;
}
#undef IS_BCAST_PROBEREQ
#undef IS_PROBEREQ
/*
* Return a reference to the appropriate node for sending
* a data frame. This handles node discovery in adhoc networks.
*/
struct ieee80211_node *
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_find_txnode_debug(struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN],
const char *func, int line)
#else
ieee80211_find_txnode(struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN])
#endif
{
struct ieee80211_node_table *nt = &vap->iv_ic->ic_sta;
struct ieee80211_node *ni;
/*
* The destination address should be in the node table
* unless this is a multicast/broadcast frame. We can
* also optimize station mode operation, all frames go
* to the bss node.
*/
/* XXX can't hold lock across dup_bss 'cuz of recursive locking */
IEEE80211_NODE_LOCK(nt);
if (vap->iv_opmode == IEEE80211_M_STA ||
vap->iv_opmode == IEEE80211_M_WDS ||
IEEE80211_IS_MULTICAST(macaddr))
ni = ieee80211_ref_node(vap->iv_bss);
else
ni = ieee80211_find_node_locked(nt, macaddr);
IEEE80211_NODE_UNLOCK(nt);
if (ni == NULL) {
if (vap->iv_opmode == IEEE80211_M_IBSS ||
vap->iv_opmode == IEEE80211_M_AHDEMO) {
/*
* In adhoc mode cons up a node for the destination.
* Note that we need an additional reference for the
* caller to be consistent with
* ieee80211_find_node_locked.
*/
ni = ieee80211_fakeup_adhoc_node(vap, macaddr);
if (ni != NULL)
(void) ieee80211_ref_node(ni);
} else {
IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_OUTPUT, macaddr,
"no node, discard frame (%s)", __func__);
vap->iv_stats.is_tx_nonode++;
}
}
return ni;
}
static void
_ieee80211_free_node(struct ieee80211_node *ni)
{
struct ieee80211_node_table *nt = ni->ni_table;
/*
* NB: careful about referencing the vap as it may be
* gone if the last reference was held by a driver.
* We know the com will always be present so it's safe
* to use ni_ic below to reclaim resources.
*/
#if 0
IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE,
"%s %p<%s> in %s table\n", __func__, ni,
ether_sprintf(ni->ni_macaddr),
nt != NULL ? nt->nt_name : "<gone>");
#endif
if (ni->ni_associd != 0) {
struct ieee80211vap *vap = ni->ni_vap;
if (vap->iv_aid_bitmap != NULL)
IEEE80211_AID_CLR(vap, ni->ni_associd);
}
if (nt != NULL) {
TAILQ_REMOVE(&nt->nt_node, ni, ni_list);
LIST_REMOVE(ni, ni_hash);
}
ni->ni_ic->ic_node_free(ni);
}
/*
* Clear any entry in the unicast key mapping table.
*/
static int
node_clear_keyixmap(struct ieee80211_node_table *nt, struct ieee80211_node *ni)
{
ieee80211_keyix keyix;
keyix = ni->ni_ucastkey.wk_rxkeyix;
if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax &&
nt->nt_keyixmap[keyix] == ni) {
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
"%s: %p<%s> clear key map entry %u\n",
__func__, ni, ether_sprintf(ni->ni_macaddr), keyix);
nt->nt_keyixmap[keyix] = NULL;
ieee80211_node_decref(ni);
return 1;
}
return 0;
}
void
#ifdef IEEE80211_DEBUG_REFCNT
ieee80211_free_node_debug(struct ieee80211_node *ni, const char *func, int line)
#else
ieee80211_free_node(struct ieee80211_node *ni)
#endif
{
struct ieee80211_node_table *nt = ni->ni_table;
#ifdef IEEE80211_DEBUG_REFCNT
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
"%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni,
ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)-1);
#endif
if (nt != NULL) {
IEEE80211_NODE_LOCK(nt);
if (ieee80211_node_dectestref(ni)) {
/*
* Last reference, reclaim state.
*/
_ieee80211_free_node(ni);
} else if (ieee80211_node_refcnt(ni) == 1)
if (node_clear_keyixmap(nt, ni))
_ieee80211_free_node(ni);
IEEE80211_NODE_UNLOCK(nt);
} else {
if (ieee80211_node_dectestref(ni))
_ieee80211_free_node(ni);
}
}
/*
* Reclaim a unicast key and clear any key cache state.
*/
int
ieee80211_node_delucastkey(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_node_table *nt = &ic->ic_sta;
struct ieee80211_node *nikey;
ieee80211_keyix keyix;
int isowned, status;
/*
* NB: We must beware of LOR here; deleting the key
* can cause the crypto layer to block traffic updates
* which can generate a LOR against the node table lock;
* grab it here and stash the key index for our use below.
*
* Must also beware of recursion on the node table lock.
* When called from node_cleanup we may already have
* the node table lock held. Unfortunately there's no
* way to separate out this path so we must do this
* conditionally.
*/
isowned = IEEE80211_NODE_IS_LOCKED(nt);
if (!isowned)
IEEE80211_NODE_LOCK(nt);
nikey = NULL;
status = 1; /* NB: success */
if (ni->ni_ucastkey.wk_keyix != IEEE80211_KEYIX_NONE) {
keyix = ni->ni_ucastkey.wk_rxkeyix;
status = ieee80211_crypto_delkey(ni->ni_vap, &ni->ni_ucastkey);
if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax) {
nikey = nt->nt_keyixmap[keyix];
nt->nt_keyixmap[keyix] = NULL;
}
}
if (!isowned)
IEEE80211_NODE_UNLOCK(nt);
if (nikey != NULL) {
KASSERT(nikey == ni,
("key map out of sync, ni %p nikey %p", ni, nikey));
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
"%s: delete key map entry %p<%s> refcnt %d\n",
__func__, ni, ether_sprintf(ni->ni_macaddr),
ieee80211_node_refcnt(ni)-1);
ieee80211_free_node(ni);
}
return status;
}
/*
* Reclaim a node. If this is the last reference count then
* do the normal free work. Otherwise remove it from the node
* table and mark it gone by clearing the back-reference.
*/
static void
node_reclaim(struct ieee80211_node_table *nt, struct ieee80211_node *ni)
{
IEEE80211_NODE_LOCK_ASSERT(nt);
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE,
"%s: remove %p<%s> from %s table, refcnt %d\n",
__func__, ni, ether_sprintf(ni->ni_macaddr),
nt->nt_name, ieee80211_node_refcnt(ni)-1);
/*
* Clear any entry in the unicast key mapping table.
* We need to do it here so rx lookups don't find it
* in the mapping table even if it's not in the hash
* table. We cannot depend on the mapping table entry
* being cleared because the node may not be free'd.
*/
(void)node_clear_keyixmap(nt, ni);
if (!ieee80211_node_dectestref(ni)) {
/*
* Other references are present, just remove the
* node from the table so it cannot be found. When
* the references are dropped storage will be
* reclaimed.
*/
TAILQ_REMOVE(&nt->nt_node, ni, ni_list);
LIST_REMOVE(ni, ni_hash);
ni->ni_table = NULL; /* clear reference */
} else
_ieee80211_free_node(ni);
}
/*
* Node table support.
*/
static void
ieee80211_node_table_init(struct ieee80211com *ic,
struct ieee80211_node_table *nt,
const char *name, int inact, int keyixmax)
{
struct ifnet *ifp = ic->ic_ifp;
nt->nt_ic = ic;
IEEE80211_NODE_LOCK_INIT(nt, ifp->if_xname);
IEEE80211_NODE_ITERATE_LOCK_INIT(nt, ifp->if_xname);
TAILQ_INIT(&nt->nt_node);
nt->nt_name = name;
nt->nt_scangen = 1;
nt->nt_inact_init = inact;
nt->nt_keyixmax = keyixmax;
if (nt->nt_keyixmax > 0) {
nt->nt_keyixmap = (struct ieee80211_node **) malloc(
keyixmax * sizeof(struct ieee80211_node *),
M_80211_NODE, M_NOWAIT | M_ZERO);
if (nt->nt_keyixmap == NULL)
if_printf(ic->ic_ifp,
"Cannot allocate key index map with %u entries\n",
keyixmax);
} else
nt->nt_keyixmap = NULL;
}
static void
ieee80211_node_table_reset(struct ieee80211_node_table *nt,
struct ieee80211vap *match)
{
struct ieee80211_node *ni, *next;
IEEE80211_NODE_LOCK(nt);
TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next) {
if (match != NULL && ni->ni_vap != match)
continue;
/* XXX can this happen? if so need's work */
if (ni->ni_associd != 0) {
struct ieee80211vap *vap = ni->ni_vap;
if (vap->iv_auth->ia_node_leave != NULL)
vap->iv_auth->ia_node_leave(ni);
if (vap->iv_aid_bitmap != NULL)
IEEE80211_AID_CLR(vap, ni->ni_associd);
}
ni->ni_wdsvap = NULL; /* clear reference */
node_reclaim(nt, ni);
}
if (match != NULL && match->iv_opmode == IEEE80211_M_WDS) {
/*
* Make a separate pass to clear references to this vap
* held by DWDS entries. They will not be matched above
* because ni_vap will point to the ap vap but we still
* need to clear ni_wdsvap when the WDS vap is destroyed
* and/or reset.
*/
TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next)
if (ni->ni_wdsvap == match)
ni->ni_wdsvap = NULL;
}
IEEE80211_NODE_UNLOCK(nt);
}
static void
ieee80211_node_table_cleanup(struct ieee80211_node_table *nt)
{
ieee80211_node_table_reset(nt, NULL);
if (nt->nt_keyixmap != NULL) {
#ifdef DIAGNOSTIC
/* XXX verify all entries are NULL */
int i;
for (i = 0; i < nt->nt_keyixmax; i++)
if (nt->nt_keyixmap[i] != NULL)
printf("%s: %s[%u] still active\n", __func__,
nt->nt_name, i);
#endif
free(nt->nt_keyixmap, M_80211_NODE);
nt->nt_keyixmap = NULL;
}
IEEE80211_NODE_ITERATE_LOCK_DESTROY(nt);
IEEE80211_NODE_LOCK_DESTROY(nt);
}
/*
* Timeout inactive stations and do related housekeeping.
* Note that we cannot hold the node lock while sending a
* frame as this would lead to a LOR. Instead we use a
* generation number to mark nodes that we've scanned and
* drop the lock and restart a scan if we have to time out
* a node. Since we are single-threaded by virtue of
* controlling the inactivity timer we can be sure this will
* process each node only once.
*/
static void
ieee80211_timeout_stations(struct ieee80211com *ic)
{
struct ieee80211_node_table *nt = &ic->ic_sta;
struct ieee80211vap *vap;
struct ieee80211_node *ni;
int gen = 0;
IEEE80211_NODE_ITERATE_LOCK(nt);
gen = ++nt->nt_scangen;
restart:
IEEE80211_NODE_LOCK(nt);
TAILQ_FOREACH(ni, &nt->nt_node, ni_list) {
if (ni->ni_scangen == gen) /* previously handled */
continue;
ni->ni_scangen = gen;
/*
* Ignore entries for which have yet to receive an
* authentication frame. These are transient and
* will be reclaimed when the last reference to them
* goes away (when frame xmits complete).
*/
vap = ni->ni_vap;
/*
* Only process stations when in RUN state. This
* insures, for example, that we don't timeout an
* inactive station during CAC. Note that CSA state
* is actually handled in ieee80211_node_timeout as
* it applies to more than timeout processing.
*/
if (vap->iv_state != IEEE80211_S_RUN)
continue;
/* XXX can vap be NULL? */
if ((vap->iv_opmode == IEEE80211_M_HOSTAP ||
vap->iv_opmode == IEEE80211_M_STA) &&
(ni->ni_flags & IEEE80211_NODE_AREF) == 0)
continue;
/*
* Free fragment if not needed anymore
* (last fragment older than 1s).
* XXX doesn't belong here, move to node_age
*/
if (ni->ni_rxfrag[0] != NULL &&
ticks > ni->ni_rxfragstamp + hz) {
m_freem(ni->ni_rxfrag[0]);
ni->ni_rxfrag[0] = NULL;
}
if (ni->ni_inact > 0) {
ni->ni_inact--;
IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni,
"%s: inact %u inact_reload %u nrates %u",
__func__, ni->ni_inact, ni->ni_inact_reload,
ni->ni_rates.rs_nrates);
}
/*
* Special case ourself; we may be idle for extended periods
* of time and regardless reclaiming our state is wrong.
* XXX run ic_node_age
*/
if (ni == vap->iv_bss)
continue;
if (ni->ni_associd != 0 ||
(vap->iv_opmode == IEEE80211_M_IBSS ||
vap->iv_opmode == IEEE80211_M_AHDEMO)) {
/*
* Age/drain resources held by the station.
*/
ic->ic_node_age(ni);
/*
* Probe the station before time it out. We
* send a null data frame which may not be
* universally supported by drivers (need it
* for ps-poll support so it should be...).
*
* XXX don't probe the station unless we've
* received a frame from them (and have
* some idea of the rates they are capable
* of); this will get fixed more properly
* soon with better handling of the rate set.
*/
if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) &&
(0 < ni->ni_inact &&
ni->ni_inact <= vap->iv_inact_probe) &&
ni->ni_rates.rs_nrates != 0) {
IEEE80211_NOTE(vap,
IEEE80211_MSG_INACT | IEEE80211_MSG_NODE,
ni, "%s",
"probe station due to inactivity");
/*
* Grab a reference before unlocking the table
* so the node cannot be reclaimed before we
* send the frame. ieee80211_send_nulldata
* understands we've done this and reclaims the
* ref for us as needed.
*/
ieee80211_ref_node(ni);
IEEE80211_NODE_UNLOCK(nt);
ieee80211_send_nulldata(ni);
/* XXX stat? */
goto restart;
}
}
if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) &&
ni->ni_inact <= 0) {
IEEE80211_NOTE(vap,
IEEE80211_MSG_INACT | IEEE80211_MSG_NODE, ni,
"station timed out due to inactivity "
"(refcnt %u)", ieee80211_node_refcnt(ni));
/*
* Send a deauthenticate frame and drop the station.
* This is somewhat complicated due to reference counts
* and locking. At this point a station will typically
* have a reference count of 1. ieee80211_node_leave
* will do a "free" of the node which will drop the
* reference count. But in the meantime a reference
* wil be held by the deauth frame. The actual reclaim
* of the node will happen either after the tx is
* completed or by ieee80211_node_leave.
*
* Separately we must drop the node lock before sending
* in case the driver takes a lock, as this can result
* in a LOR between the node lock and the driver lock.
*/
ieee80211_ref_node(ni);
IEEE80211_NODE_UNLOCK(nt);
if (ni->ni_associd != 0) {
IEEE80211_SEND_MGMT(ni,
IEEE80211_FC0_SUBTYPE_DEAUTH,
IEEE80211_REASON_AUTH_EXPIRE);
}
ieee80211_node_leave(ni);
ieee80211_free_node(ni);
vap->iv_stats.is_node_timeout++;
goto restart;
}
}
IEEE80211_NODE_UNLOCK(nt);
IEEE80211_NODE_ITERATE_UNLOCK(nt);
}
/*
* Aggressively reclaim resources. This should be used
* only in a critical situation to reclaim mbuf resources.
*/
void
ieee80211_drain(struct ieee80211com *ic)
{
struct ieee80211_node_table *nt = &ic->ic_sta;
struct ieee80211vap *vap;
struct ieee80211_node *ni;
IEEE80211_NODE_LOCK(nt);
TAILQ_FOREACH(ni, &nt->nt_node, ni_list) {
/*
* Ignore entries for which have yet to receive an
* authentication frame. These are transient and
* will be reclaimed when the last reference to them
* goes away (when frame xmits complete).
*/
vap = ni->ni_vap;
/*
* Only process stations when in RUN state. This
* insures, for example, that we don't timeout an
* inactive station during CAC. Note that CSA state
* is actually handled in ieee80211_node_timeout as
* it applies to more than timeout processing.
*/
if (vap->iv_state != IEEE80211_S_RUN)
continue;
/* XXX can vap be NULL? */
if ((vap->iv_opmode == IEEE80211_M_HOSTAP ||
vap->iv_opmode == IEEE80211_M_STA) &&
(ni->ni_flags & IEEE80211_NODE_AREF) == 0)
continue;
/*
* Free fragments.
* XXX doesn't belong here, move to node_drain
*/
if (ni->ni_rxfrag[0] != NULL) {
m_freem(ni->ni_rxfrag[0]);
ni->ni_rxfrag[0] = NULL;
}
/*
* Drain resources held by the station.
*/
ic->ic_node_drain(ni);
}
IEEE80211_NODE_UNLOCK(nt);
}
/*
* Per-ieee80211com inactivity timer callback.
*/
void
ieee80211_node_timeout(void *arg)
{
struct ieee80211com *ic = arg;
/*
* Defer timeout processing if a channel switch is pending.
* We typically need to be mute so not doing things that
* might generate frames is good to handle in one place.
* Supressing the station timeout processing may extend the
* lifetime of inactive stations (by not decrementing their
* idle counters) but this should be ok unless the CSA is
* active for an unusually long time.
*/
if ((ic->ic_flags & IEEE80211_F_CSAPENDING) == 0) {
ieee80211_scan_timeout(ic);
ieee80211_timeout_stations(ic);
ieee80211_ageq_age(&ic->ic_stageq, IEEE80211_INACT_WAIT);
IEEE80211_LOCK(ic);
ieee80211_erp_timeout(ic);
ieee80211_ht_timeout(ic);
IEEE80211_UNLOCK(ic);
}
callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz,
ieee80211_node_timeout, ic);
}
/*
* Iterate over the node table and return an array of ref'ed nodes.
*
* This is separated out from calling the actual node function so that
* no LORs will occur.
*
* If there are too many nodes (ie, the number of nodes doesn't fit
* within 'max_aid' entries) then the node references will be freed
* and an error will be returned.
*
* The responsibility of allocating and freeing "ni_arr" is up to
* the caller.
*/
int
ieee80211_iterate_nt(struct ieee80211_node_table *nt,
struct ieee80211_node **ni_arr, uint16_t max_aid)
{
u_int gen;
int i, j, ret;
struct ieee80211_node *ni;
IEEE80211_NODE_ITERATE_LOCK(nt);
IEEE80211_NODE_LOCK(nt);
gen = ++nt->nt_scangen;
i = ret = 0;
/*
* We simply assume here that since the node
* scan generation doesn't change (as
* we are holding both the node table and
* node table iteration locks), we can simply
* assign it to the node here.
*/
TAILQ_FOREACH(ni, &nt->nt_node, ni_list) {
if (i >= max_aid) {
ret = E2BIG;
if_printf(nt->nt_ic->ic_ifp,
"Node array overflow: max=%u", max_aid);
break;
}
ni_arr[i] = ieee80211_ref_node(ni);
ni_arr[i]->ni_scangen = gen;
i++;
}
/*
* It's safe to unlock here.
*
* If we're successful, the list is returned.
* If we're unsuccessful, the list is ignored
* and we remove our references.
*
* This avoids any potential LOR with
* ieee80211_free_node().
*/
IEEE80211_NODE_UNLOCK(nt);
IEEE80211_NODE_ITERATE_UNLOCK(nt);
/*
* If ret is non-zero, we hit some kind of error.
* Rather than walking some nodes, we'll walk none
* of them.
*/
if (ret) {
for (j = 0; j < i; j++) {
/* ieee80211_free_node() locks by itself */
ieee80211_free_node(ni_arr[j]);
}
}
return (ret);
}
/*
* Just a wrapper, so we don't have to change every ieee80211_iterate_nodes()
* reference in the source.
*
* Note that this fetches 'max_aid' from the first VAP, rather than finding
* the largest max_aid from all VAPs.
*/
void
ieee80211_iterate_nodes(struct ieee80211_node_table *nt,
ieee80211_iter_func *f, void *arg)
{
struct ieee80211_node **ni_arr;
size_t size;
int i;
uint16_t max_aid;
struct ieee80211vap *vap;
/* Overdoing it default */
max_aid = IEEE80211_AID_MAX;
/* Handle the case of there being no vaps just yet */
vap = TAILQ_FIRST(&nt->nt_ic->ic_vaps);
if (vap != NULL)
max_aid = vap->iv_max_aid;
size = max_aid * sizeof(struct ieee80211_node *);
ni_arr = (struct ieee80211_node **) malloc(size, M_80211_NODE,
M_NOWAIT | M_ZERO);
if (ni_arr == NULL)
return;
/*
* If this fails, the node table won't have any
* valid entries - ieee80211_iterate_nt() frees
* the references to them. So don't try walking
* the table; just skip to the end and free the
* temporary memory.
*/
if (ieee80211_iterate_nt(nt, ni_arr, max_aid) != 0)
goto done;
for (i = 0; i < max_aid; i++) {
if (ni_arr[i] == NULL) /* end of the list */
break;
(*f)(arg, ni_arr[i]);
/* ieee80211_free_node() locks by itself */
ieee80211_free_node(ni_arr[i]);
}
done:
free(ni_arr, M_80211_NODE);
}
void
ieee80211_dump_node(struct ieee80211_node_table *nt, struct ieee80211_node *ni)
{
printf("0x%p: mac %s refcnt %d\n", ni,
ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni));
printf("\tscangen %u authmode %u flags 0x%x\n",
ni->ni_scangen, ni->ni_authmode, ni->ni_flags);
printf("\tassocid 0x%x txpower %u vlan %u\n",
ni->ni_associd, ni->ni_txpower, ni->ni_vlan);
printf("\ttxseq %u rxseq %u fragno %u rxfragstamp %u\n",
ni->ni_txseqs[IEEE80211_NONQOS_TID],
ni->ni_rxseqs[IEEE80211_NONQOS_TID] >> IEEE80211_SEQ_SEQ_SHIFT,
ni->ni_rxseqs[IEEE80211_NONQOS_TID] & IEEE80211_SEQ_FRAG_MASK,
ni->ni_rxfragstamp);
printf("\trssi %d noise %d intval %u capinfo 0x%x\n",
node_getrssi(ni), ni->ni_noise,
ni->ni_intval, ni->ni_capinfo);
printf("\tbssid %s essid \"%.*s\" channel %u:0x%x\n",
ether_sprintf(ni->ni_bssid),
ni->ni_esslen, ni->ni_essid,
ni->ni_chan->ic_freq, ni->ni_chan->ic_flags);
printf("\tinact %u inact_reload %u txrate %u\n",
ni->ni_inact, ni->ni_inact_reload, ni->ni_txrate);
printf("\thtcap %x htparam %x htctlchan %u ht2ndchan %u\n",
ni->ni_htcap, ni->ni_htparam,
ni->ni_htctlchan, ni->ni_ht2ndchan);
printf("\thtopmode %x htstbc %x chw %u\n",
ni->ni_htopmode, ni->ni_htstbc, ni->ni_chw);
}
void
ieee80211_dump_nodes(struct ieee80211_node_table *nt)
{
ieee80211_iterate_nodes(nt,
(ieee80211_iter_func *) ieee80211_dump_node, nt);
}
static void
ieee80211_notify_erp_locked(struct ieee80211com *ic)
{
struct ieee80211vap *vap;
IEEE80211_LOCK_ASSERT(ic);
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next)
if (vap->iv_opmode == IEEE80211_M_HOSTAP)
ieee80211_beacon_notify(vap, IEEE80211_BEACON_ERP);
}
void
ieee80211_notify_erp(struct ieee80211com *ic)
{
IEEE80211_LOCK(ic);
ieee80211_notify_erp_locked(ic);
IEEE80211_UNLOCK(ic);
}
/*
* Handle a station joining an 11g network.
*/
static void
ieee80211_node_join_11g(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
IEEE80211_LOCK_ASSERT(ic);
/*
* Station isn't capable of short slot time. Bump
* the count of long slot time stations and disable
* use of short slot time. Note that the actual switch
* over to long slot time use may not occur until the
* next beacon transmission (per sec. 7.3.1.4 of 11g).
*/
if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) {
ic->ic_longslotsta++;
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
"station needs long slot time, count %d",
ic->ic_longslotsta);
/* XXX vap's w/ conflicting needs won't work */
if (!IEEE80211_IS_CHAN_108G(ic->ic_bsschan)) {
/*
* Don't force slot time when switched to turbo
* mode as non-ERP stations won't be present; this
* need only be done when on the normal G channel.
*/
ieee80211_set_shortslottime(ic, 0);
}
}
/*
* If the new station is not an ERP station
* then bump the counter and enable protection
* if configured.
*/
if (!ieee80211_iserp_rateset(&ni->ni_rates)) {
ic->ic_nonerpsta++;
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
"station is !ERP, %d non-ERP stations associated",
ic->ic_nonerpsta);
/*
* If station does not support short preamble
* then we must enable use of Barker preamble.
*/
if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE) == 0) {
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
"%s", "station needs long preamble");
ic->ic_flags |= IEEE80211_F_USEBARKER;
ic->ic_flags &= ~IEEE80211_F_SHPREAMBLE;
}
/*
* If protection is configured and this is the first
* indication we should use protection, enable it.
*/
if (ic->ic_protmode != IEEE80211_PROT_NONE &&
ic->ic_nonerpsta == 1 &&
(ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) {
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC,
"%s: enable use of protection\n", __func__);
ic->ic_flags |= IEEE80211_F_USEPROT;
ieee80211_notify_erp_locked(ic);
}
} else
ni->ni_flags |= IEEE80211_NODE_ERP;
}
void
ieee80211_node_join(struct ieee80211_node *ni, int resp)
{
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211vap *vap = ni->ni_vap;
int newassoc;
if (ni->ni_associd == 0) {
uint16_t aid;
KASSERT(vap->iv_aid_bitmap != NULL, ("no aid bitmap"));
/*
* It would be good to search the bitmap
* more efficiently, but this will do for now.
*/
for (aid = 1; aid < vap->iv_max_aid; aid++) {
if (!IEEE80211_AID_ISSET(vap, aid))
break;
}
if (aid >= vap->iv_max_aid) {
IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_TOOMANY);
ieee80211_node_leave(ni);
return;
}
ni->ni_associd = aid | 0xc000;
ni->ni_jointime = time_uptime;
IEEE80211_LOCK(ic);
IEEE80211_AID_SET(vap, ni->ni_associd);
vap->iv_sta_assoc++;
ic->ic_sta_assoc++;
if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan))
ieee80211_ht_node_join(ni);
if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) &&
IEEE80211_IS_CHAN_FULL(ic->ic_bsschan))
ieee80211_node_join_11g(ni);
IEEE80211_UNLOCK(ic);
newassoc = 1;
} else
newassoc = 0;
IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni,
"station associated at aid %d: %s preamble, %s slot time%s%s%s%s%s%s%s%s",
IEEE80211_NODE_AID(ni),
ic->ic_flags & IEEE80211_F_SHPREAMBLE ? "short" : "long",
ic->ic_flags & IEEE80211_F_SHSLOT ? "short" : "long",
ic->ic_flags & IEEE80211_F_USEPROT ? ", protection" : "",
ni->ni_flags & IEEE80211_NODE_QOS ? ", QoS" : "",
ni->ni_flags & IEEE80211_NODE_HT ?
(ni->ni_chw == 40 ? ", HT40" : ", HT20") : "",
ni->ni_flags & IEEE80211_NODE_AMPDU ? " (+AMPDU)" : "",
ni->ni_flags & IEEE80211_NODE_MIMO_RTS ? " (+SMPS-DYN)" :
ni->ni_flags & IEEE80211_NODE_MIMO_PS ? " (+SMPS)" : "",
ni->ni_flags & IEEE80211_NODE_RIFS ? " (+RIFS)" : "",
IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF) ?
", fast-frames" : "",
IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_TURBOP) ?
", turbo" : ""
);
ieee80211_node_setuptxparms(ni);
ieee80211_ratectl_node_init(ni);
/* give driver a chance to setup state like ni_txrate */
if (ic->ic_newassoc != NULL)
ic->ic_newassoc(ni, newassoc);
IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_SUCCESS);
/* tell the authenticator about new station */
if (vap->iv_auth->ia_node_join != NULL)
vap->iv_auth->ia_node_join(ni);
ieee80211_notify_node_join(ni,
resp == IEEE80211_FC0_SUBTYPE_ASSOC_RESP);
}
static void
disable_protection(struct ieee80211com *ic)
{
KASSERT(ic->ic_nonerpsta == 0 &&
(ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0,
("%d non ERP stations, flags 0x%x", ic->ic_nonerpsta,
ic->ic_flags_ext));
ic->ic_flags &= ~IEEE80211_F_USEPROT;
/* XXX verify mode? */
if (ic->ic_caps & IEEE80211_C_SHPREAMBLE) {
ic->ic_flags |= IEEE80211_F_SHPREAMBLE;
ic->ic_flags &= ~IEEE80211_F_USEBARKER;
}
ieee80211_notify_erp_locked(ic);
}
/*
* Handle a station leaving an 11g network.
*/
static void
ieee80211_node_leave_11g(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
IEEE80211_LOCK_ASSERT(ic);
KASSERT(IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan),
("not in 11g, bss %u:0x%x", ic->ic_bsschan->ic_freq,
ic->ic_bsschan->ic_flags));
/*
* If a long slot station do the slot time bookkeeping.
*/
if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) {
KASSERT(ic->ic_longslotsta > 0,
("bogus long slot station count %d", ic->ic_longslotsta));
ic->ic_longslotsta--;
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
"long slot time station leaves, count now %d",
ic->ic_longslotsta);
if (ic->ic_longslotsta == 0) {
/*
* Re-enable use of short slot time if supported
* and not operating in IBSS mode (per spec).
*/
if ((ic->ic_caps & IEEE80211_C_SHSLOT) &&
ic->ic_opmode != IEEE80211_M_IBSS) {
IEEE80211_DPRINTF(ni->ni_vap,
IEEE80211_MSG_ASSOC,
"%s: re-enable use of short slot time\n",
__func__);
ieee80211_set_shortslottime(ic, 1);
}
}
}
/*
* If a non-ERP station do the protection-related bookkeeping.
*/
if ((ni->ni_flags & IEEE80211_NODE_ERP) == 0) {
KASSERT(ic->ic_nonerpsta > 0,
("bogus non-ERP station count %d", ic->ic_nonerpsta));
ic->ic_nonerpsta--;
IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni,
"non-ERP station leaves, count now %d%s", ic->ic_nonerpsta,
(ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) ?
" (non-ERP sta present)" : "");
if (ic->ic_nonerpsta == 0 &&
(ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) {
IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC,
"%s: disable use of protection\n", __func__);
disable_protection(ic);
}
}
}
/*
* Time out presence of an overlapping bss with non-ERP
* stations. When operating in hostap mode we listen for
* beacons from other stations and if we identify a non-ERP
* station is present we enable protection. To identify
* when all non-ERP stations are gone we time out this
* condition.
*/
static void
ieee80211_erp_timeout(struct ieee80211com *ic)
{
IEEE80211_LOCK_ASSERT(ic);
if ((ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) &&
time_after(ticks, ic->ic_lastnonerp + IEEE80211_NONERP_PRESENT_AGE)) {
#if 0
IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC, ni,
"%s", "age out non-ERP sta present on channel");
#endif
ic->ic_flags_ext &= ~IEEE80211_FEXT_NONERP_PR;
if (ic->ic_nonerpsta == 0)
disable_protection(ic);
}
}
/*
* Handle bookkeeping for station deauthentication/disassociation
* when operating as an ap.
*/
void
ieee80211_node_leave(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211_node_table *nt = ni->ni_table;
IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni,
"station with aid %d leaves", IEEE80211_NODE_AID(ni));
KASSERT(vap->iv_opmode != IEEE80211_M_STA,
("unexpected operating mode %u", vap->iv_opmode));
/*
* If node wasn't previously associated all
* we need to do is reclaim the reference.
*/
/* XXX ibss mode bypasses 11g and notification */
if (ni->ni_associd == 0)
goto done;
/*
* Tell the authenticator the station is leaving.
* Note that we must do this before yanking the
* association id as the authenticator uses the
* associd to locate it's state block.
*/
if (vap->iv_auth->ia_node_leave != NULL)
vap->iv_auth->ia_node_leave(ni);
IEEE80211_LOCK(ic);
IEEE80211_AID_CLR(vap, ni->ni_associd);
ni->ni_associd = 0;
vap->iv_sta_assoc--;
ic->ic_sta_assoc--;
if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan))
ieee80211_ht_node_leave(ni);
if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) &&
IEEE80211_IS_CHAN_FULL(ic->ic_bsschan))
ieee80211_node_leave_11g(ni);
IEEE80211_UNLOCK(ic);
/*
* Cleanup station state. In particular clear various
* state that might otherwise be reused if the node
* is reused before the reference count goes to zero
* (and memory is reclaimed).
*/
ieee80211_sta_leave(ni);
done:
/*
* Remove the node from any table it's recorded in and
* drop the caller's reference. Removal from the table
* is important to insure the node is not reprocessed
* for inactivity.
*/
if (nt != NULL) {
IEEE80211_NODE_LOCK(nt);
node_reclaim(nt, ni);
IEEE80211_NODE_UNLOCK(nt);
} else
ieee80211_free_node(ni);
}
struct rssiinfo {
struct ieee80211vap *vap;
int rssi_samples;
uint32_t rssi_total;
};
static void
get_hostap_rssi(void *arg, struct ieee80211_node *ni)
{
struct rssiinfo *info = arg;
struct ieee80211vap *vap = ni->ni_vap;
int8_t rssi;
if (info->vap != vap)
return;
/* only associated stations */
if (ni->ni_associd == 0)
return;
rssi = vap->iv_ic->ic_node_getrssi(ni);
if (rssi != 0) {
info->rssi_samples++;
info->rssi_total += rssi;
}
}
static void
get_adhoc_rssi(void *arg, struct ieee80211_node *ni)
{
struct rssiinfo *info = arg;
struct ieee80211vap *vap = ni->ni_vap;
int8_t rssi;
if (info->vap != vap)
return;
/* only neighbors */
/* XXX check bssid */
if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0)
return;
rssi = vap->iv_ic->ic_node_getrssi(ni);
if (rssi != 0) {
info->rssi_samples++;
info->rssi_total += rssi;
}
}
#ifdef IEEE80211_SUPPORT_MESH
static void
get_mesh_rssi(void *arg, struct ieee80211_node *ni)
{
struct rssiinfo *info = arg;
struct ieee80211vap *vap = ni->ni_vap;
int8_t rssi;
if (info->vap != vap)
return;
/* only neighbors that peered successfully */
if (ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED)
return;
rssi = vap->iv_ic->ic_node_getrssi(ni);
if (rssi != 0) {
info->rssi_samples++;
info->rssi_total += rssi;
}
}
#endif /* IEEE80211_SUPPORT_MESH */
int8_t
ieee80211_getrssi(struct ieee80211vap *vap)
{
#define NZ(x) ((x) == 0 ? 1 : (x))
struct ieee80211com *ic = vap->iv_ic;
struct rssiinfo info;
info.rssi_total = 0;
info.rssi_samples = 0;
info.vap = vap;
switch (vap->iv_opmode) {
case IEEE80211_M_IBSS: /* average of all ibss neighbors */
case IEEE80211_M_AHDEMO: /* average of all neighbors */
ieee80211_iterate_nodes(&ic->ic_sta, get_adhoc_rssi, &info);
break;
case IEEE80211_M_HOSTAP: /* average of all associated stations */
ieee80211_iterate_nodes(&ic->ic_sta, get_hostap_rssi, &info);
break;
#ifdef IEEE80211_SUPPORT_MESH
case IEEE80211_M_MBSS: /* average of all mesh neighbors */
ieee80211_iterate_nodes(&ic->ic_sta, get_mesh_rssi, &info);
break;
#endif
case IEEE80211_M_MONITOR: /* XXX */
case IEEE80211_M_STA: /* use stats from associated ap */
default:
if (vap->iv_bss != NULL)
info.rssi_total = ic->ic_node_getrssi(vap->iv_bss);
info.rssi_samples = 1;
break;
}
return info.rssi_total / NZ(info.rssi_samples);
#undef NZ
}
void
ieee80211_getsignal(struct ieee80211vap *vap, int8_t *rssi, int8_t *noise)
{
if (vap->iv_bss == NULL) /* NB: shouldn't happen */
return;
vap->iv_ic->ic_node_getsignal(vap->iv_bss, rssi, noise);
/* for non-station mode return avg'd rssi accounting */
if (vap->iv_opmode != IEEE80211_M_STA)
*rssi = ieee80211_getrssi(vap);
}
Reference in New Issue View Git Blame Copy Permalink