| .. |
|
at91_aic.c
|
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
|
2014-05-17 00:53:12 +00:00 |
|
at91_aicreg.h
|
|
|
|
at91_cfata.c
|
|
|
|
at91_gpio.h
|
MFC r260695, r260696, r260884, r260885, r260886, r260887
|
2014-05-14 20:31:54 +00:00 |
|
at91_machdep.c
|
MFC 265852: Map device memory using PTE_DEVICE rather than PTE_NOCACHE.
|
2014-05-18 00:32:35 +00:00 |
|
at91_mci.c
|
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
|
2014-05-15 21:21:47 +00:00 |
|
at91_mcireg.h
|
- Add support for MCI1 revision 2xx controllers and a work-around for their
|
2012-04-22 00:43:32 +00:00 |
|
at91_pdcreg.h
|
|
|
|
at91_pinctrl.c
|
MFC r270945:
|
2014-10-26 01:30:46 +00:00 |
|
at91_pio_sam9g20.h
|
|
|
|
at91_pio_sam9g45.h
|
Add support for the Atmel AT91SAM9G45 CPU.
|
2012-07-26 08:01:25 +00:00 |
|
at91_pio.c
|
MFC r270025:
|
2014-10-26 01:26:53 +00:00 |
|
at91_pioreg.h
|
MFC r258820: Add definitions for the PIO pins found on recent AT91 SoCs.
|
2013-12-14 01:14:38 +00:00 |
|
at91_piovar.h
|
MFC r270025:
|
2014-10-26 01:26:53 +00:00 |
|
at91_pit.c
|
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
|
2014-05-15 21:21:47 +00:00 |
|
at91_pitreg.h
|
at91pit->at91_pit for consistnecy with other drivers.
|
2012-07-11 17:11:54 +00:00 |
|
at91_pmc.c
|
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
|
2014-05-15 21:21:47 +00:00 |
|
at91_pmcreg.h
|
Add charge pump current register.
|
2012-08-10 04:47:20 +00:00 |
|
at91_pmcvar.h
|
Correct the PLLA setting functions and centralize.
|
2012-08-11 05:45:19 +00:00 |
|
at91_reset.S
|
Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way
|
2012-07-10 02:14:50 +00:00 |
|
at91_rst.c
|
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
|
2014-05-15 21:21:47 +00:00 |
|
at91_rstreg.h
|
at91$DEV->at91_$DEV to match other Atmel drivers. Also, export
|
2012-07-11 17:11:07 +00:00 |
|
at91_rtc.c
|
Loop reading the RTC registers until the same values are obtained
|
2012-10-07 20:36:46 +00:00 |
|
at91_rtcreg.h
|
Use the RTC unit to get the time. This works on all known AT91SAM9*
|
2012-10-07 01:58:32 +00:00 |
|
at91_sdramc.c
|
MFC r262591, r262592, r262593, r262597, r262598, r262599, r262600, r262601,
|
2014-05-16 12:43:45 +00:00 |
|
at91_shdwc.c
|
MFC r262591, r262592, r262593, r262597, r262598, r262599, r262600, r262601,
|
2014-05-16 12:43:45 +00:00 |
|
at91_smc.c
|
MFC r260695, r260696, r260884, r260885, r260886, r260887
|
2014-05-14 20:31:54 +00:00 |
|
at91_smc.h
|
MFC r260695, r260696, r260884, r260885, r260886, r260887
|
2014-05-14 20:31:54 +00:00 |
|
at91_spi.c
|
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
|
2014-05-15 21:21:47 +00:00 |
|
at91_spireg.h
|
- Prepend the device description with "AT91" to reflect its nature. [1]
|
2012-06-03 00:54:10 +00:00 |
|
at91_ssc.c
|
Strip trailing whitespace before other changes.
|
2012-06-13 04:52:19 +00:00 |
|
at91_sscreg.h
|
|
|
|
at91_st.c
|
Make the SoC stuff a little more modular, and start to move away from
|
2012-07-11 20:17:14 +00:00 |
|
at91_streg.h
|
Make the SoC stuff a little more modular, and start to move away from
|
2012-07-11 20:17:14 +00:00 |
|
at91_tcb.c
|
MFC r262591, r262592, r262593, r262597, r262598, r262599, r262600, r262601,
|
2014-05-16 12:43:45 +00:00 |
|
at91_twi.c
|
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
|
2014-05-15 21:21:47 +00:00 |
|
at91_twiio.h
|
|
|
|
at91_twireg.h
|
Add support for the Atmel SAM9XE familiy of microcontrollers, which
|
2012-04-14 17:09:38 +00:00 |
|
at91_usartreg.h
|
|
|
|
at91_wdt.c
|
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
|
2014-05-15 21:21:47 +00:00 |
|
at91_wdtreg.h
|
Strip trailing whitespace before other changes.
|
2012-06-13 04:52:19 +00:00 |
|
at91.c
|
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
|
2014-05-17 00:53:12 +00:00 |
|
at91board.h
|
Create a generic way to support multiple boards within an
|
2012-07-07 05:02:39 +00:00 |
|
at91reg.h
|
The system IRQ is always IRQ 1. Make it so.
|
2012-07-10 02:39:03 +00:00 |
|
at91rm92reg.h
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
at91rm9200_devices.c
|
Fix a typo: the RXD0 pin is PA18, not PA19.
|
2013-03-29 18:06:54 +00:00 |
|
at91rm9200.c
|
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
|
2014-05-17 00:53:12 +00:00 |
|
at91rm9200var.h
|
Configure the peripheral pins for MCI devices. Eliminate the now-unused
|
2012-07-15 05:41:43 +00:00 |
|
at91sam9g20.c
|
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
|
2014-05-17 00:53:12 +00:00 |
|
at91sam9g20reg.h
|
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
|
2014-05-17 00:53:12 +00:00 |
|
at91sam9g45.c
|
MFC r260695, r260696, r260884, r260885, r260886, r260887
|
2014-05-14 20:31:54 +00:00 |
|
at91sam9g45reg.h
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
at91sam9x5.c
|
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
|
2014-05-17 00:53:12 +00:00 |
|
at91sam9x5reg.h
|
These files will support the whole at91sam9x5 family when done,
|
2012-07-30 21:30:43 +00:00 |
|
at91sam9260.c
|
MFC r260695, r260696, r260884, r260885, r260886, r260887
|
2014-05-14 20:31:54 +00:00 |
|
at91sam9260reg.h
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
at91soc.c
|
Make the SoC stuff a little more modular, and start to move away from
|
2012-07-11 20:17:14 +00:00 |
|
at91soc.h
|
Make the SoC stuff a little more modular, and start to move away from
|
2012-07-11 20:17:14 +00:00 |
|
at91var.h
|
MFC r260695, r260696, r260884, r260885, r260886, r260887
|
2014-05-14 20:31:54 +00:00 |
|
board_bwct.c
|
Configure the peripheral pins for MCI devices. Eliminate the now-unused
|
2012-07-15 05:41:43 +00:00 |
|
board_eb9200.c
|
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
|
2014-05-15 21:21:47 +00:00 |
|
board_ethernut5.c
|
uboot should be telling us it is an ETHERNUT5 for this board. Tag it
|
2012-07-14 06:00:37 +00:00 |
|
board_hl200.c
|
Configure the peripheral pins for MCI devices. Eliminate the now-unused
|
2012-07-15 05:41:43 +00:00 |
|
board_hl201.c
|
Create a generic way to support multiple boards within an
|
2012-07-07 05:02:39 +00:00 |
|
board_kb920x.c
|
Configure the peripheral pins for MCI devices. Eliminate the now-unused
|
2012-07-15 05:41:43 +00:00 |
|
board_qila9g20.c
|
Create a generic way to support multiple boards within an
|
2012-07-07 05:02:39 +00:00 |
|
board_sam9g20ek.c
|
Create a generic way to support multiple boards within an
|
2012-07-07 05:02:39 +00:00 |
|
board_sam9x25ek.c
|
Create a generic way to support multiple boards within an
|
2012-07-07 05:02:39 +00:00 |
|
board_sam9260ek.c
|
MFC r260886, r261165, r261171, r261172, r261214
|
2014-05-14 23:51:07 +00:00 |
|
board_sn9g45.c
|
Add new at91sam9g45 support and sn9g45 board to the ATMEL kernel.
|
2012-07-27 16:38:02 +00:00 |
|
board_tsc4370.c
|
Configure the peripheral pins for MCI devices. Eliminate the now-unused
|
2012-07-15 05:41:43 +00:00 |
|
files.at91
|
MFC 262952, 262958, 262966, 262979, 262980, 262986, 262987, 262995, 262997,
|
2014-05-17 13:53:38 +00:00 |
|
if_ate.c
|
MFC r261681, r261682, r261683, r261684, r261685, r261686, r261687, r261688,
|
2014-05-15 21:21:47 +00:00 |
|
if_atereg.h
|
|
|
|
if_macb.c
|
Mechanically substitute flags from historic mbuf allocator with
|
2012-12-05 08:04:20 +00:00 |
|
if_macbreg.h
|
|
|
|
if_macbvar.h
|
MFC r258779,r258780,r258787,r258822:
|
2014-02-04 03:36:42 +00:00 |
|
std.at91
|
Set machine correctly on ARM. This allows universe to use the correct world
|
2012-08-18 05:48:19 +00:00 |
|
std.at91sam9
|
Set machine correctly on ARM. This allows universe to use the correct world
|
2012-08-18 05:48:19 +00:00 |
|
std.at91sam9g45
|
Set machine correctly on ARM. This allows universe to use the correct world
|
2012-08-18 05:48:19 +00:00 |
|
std.atmel
|
Set machine correctly on ARM. This allows universe to use the correct world
|
2012-08-18 05:48:19 +00:00 |
|
std.bwct
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
std.eb9200
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
std.ethernut5
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
std.hl200
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
std.hl201
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
std.kb920x
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
std.qila9g20
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
std.sam9g20ek
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
std.sam9x25ek
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
std.sam9260ek
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
std.sn9g45
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
std.tsc4370
|
MFC r261252, r261279, r261304, r261305, r261322, r261336, r261337, r261338,
|
2014-05-15 02:41:23 +00:00 |
|
uart_bus_at91usart.c
|
MFC r261083, r261092, r261126, r261127, r261128, r261129, r261130, r261131
|
2014-05-14 23:17:33 +00:00 |
|
uart_cpu_at91usart.c
|
MFC r261083, r261092, r261126, r261127, r261128, r261129, r261130, r261131
|
2014-05-14 23:17:33 +00:00 |
|
uart_dev_at91usart.c
|
MFC r262534, r262548, r262549, r262552, r262568, r262581, r262583, r262584,
|
2014-05-16 02:21:51 +00:00 |
1c8cde378e