e18e95605f
close or assert the bug that it is clear when leaving. Remove an unrelated rotted comment that was attached to the buggy clearing. Since draining is not done in more cases, flushing is needed in more cases, so start fixing flushing: - do a full flush in ttydisc_close(). State what POSIX requires more clearly. This was missing ttydevsw_pktnotify() calls to tell the devsw layer to flush. Hardware tty drivers don't actually flush since they don't understand this API. - fix 2 missing wakeups in tty_flush(). Most of the wakeups here are unnecessary for last close. But ttydisc_close() did one of the missing ones. This flow control bug ameliorated the design bug of requiring potentially unbounded waits in draining. Software flow control is the easiest way to get an unbounded wait, and a long wait is sometimes actually useful. Users can type the xoff character on the receiver and (if ixon is set on the sender) expect the output to be held until the user is ready for more. Hardware flow control can also give the unbounded wait, and this bug didn't affect hardware flow control. Unbounded waits from hardware flow control take a more unusual configuration. E.g., a terminal program that controls the modem status lines, or unplugging the cable in a configuration where this doesn't break the connection. The design bug is still ameliorated by a newer bug in draining for last close -- the 1 second timeout. E.g., if the user types the xoff character and the sender reaches last close, then output is not resumed and the wait times out after just 1 second. This is broken, but preferable to an unbounded wait. Before this change, the output was resumed immediately and usually completed. Submitted by: bde MFC after: 2 weeks
1266 lines
28 KiB
C
1266 lines
28 KiB
C
/*-
|
|
* Copyright (c) 2008 Ed Schouten <ed@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Portions of this software were developed under sponsorship from Snow
|
|
* B.V., the Netherlands.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/filio.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/signal.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/tty.h>
|
|
#include <sys/ttycom.h>
|
|
#include <sys/ttydefaults.h>
|
|
#include <sys/uio.h>
|
|
#include <sys/vnode.h>
|
|
|
|
/*
|
|
* Standard TTYDISC `termios' line discipline.
|
|
*/
|
|
|
|
/* Statistics. */
|
|
static unsigned long tty_nin = 0;
|
|
SYSCTL_ULONG(_kern, OID_AUTO, tty_nin, CTLFLAG_RD,
|
|
&tty_nin, 0, "Total amount of bytes received");
|
|
static unsigned long tty_nout = 0;
|
|
SYSCTL_ULONG(_kern, OID_AUTO, tty_nout, CTLFLAG_RD,
|
|
&tty_nout, 0, "Total amount of bytes transmitted");
|
|
|
|
/* termios comparison macro's. */
|
|
#define CMP_CC(v,c) (tp->t_termios.c_cc[v] != _POSIX_VDISABLE && \
|
|
tp->t_termios.c_cc[v] == (c))
|
|
#define CMP_FLAG(field,opt) (tp->t_termios.c_ ## field ## flag & (opt))
|
|
|
|
/* Characters that cannot be modified through c_cc. */
|
|
#define CTAB '\t'
|
|
#define CNL '\n'
|
|
#define CCR '\r'
|
|
|
|
/* Character is a control character. */
|
|
#define CTL_VALID(c) ((c) == 0x7f || (unsigned char)(c) < 0x20)
|
|
/* Control character should be processed on echo. */
|
|
#define CTL_ECHO(c,q) (!(q) && ((c) == CERASE2 || (c) == CTAB || \
|
|
(c) == CNL || (c) == CCR))
|
|
/* Control character should be printed using ^X notation. */
|
|
#define CTL_PRINT(c,q) ((c) == 0x7f || ((unsigned char)(c) < 0x20 && \
|
|
((q) || ((c) != CTAB && (c) != CNL))))
|
|
/* Character is whitespace. */
|
|
#define CTL_WHITE(c) ((c) == ' ' || (c) == CTAB)
|
|
/* Character is alphanumeric. */
|
|
#define CTL_ALNUM(c) (((c) >= '0' && (c) <= '9') || \
|
|
((c) >= 'a' && (c) <= 'z') || ((c) >= 'A' && (c) <= 'Z'))
|
|
|
|
#define TTY_STACKBUF 256
|
|
|
|
void
|
|
ttydisc_open(struct tty *tp)
|
|
{
|
|
ttydisc_optimize(tp);
|
|
}
|
|
|
|
void
|
|
ttydisc_close(struct tty *tp)
|
|
{
|
|
|
|
/* Clean up our flags when leaving the discipline. */
|
|
tp->t_flags &= ~(TF_STOPPED|TF_HIWAT|TF_ZOMBIE);
|
|
|
|
/*
|
|
* POSIX states that we must drain output and flush input on
|
|
* last close. Draining has already been done if possible.
|
|
*/
|
|
tty_flush(tp, FREAD | FWRITE);
|
|
|
|
if (ttyhook_hashook(tp, close))
|
|
ttyhook_close(tp);
|
|
}
|
|
|
|
static int
|
|
ttydisc_read_canonical(struct tty *tp, struct uio *uio, int ioflag)
|
|
{
|
|
char breakc[4] = { CNL }; /* enough to hold \n, VEOF and VEOL. */
|
|
int error;
|
|
size_t clen, flen = 0, n = 1;
|
|
unsigned char lastc = _POSIX_VDISABLE;
|
|
|
|
#define BREAK_ADD(c) do { \
|
|
if (tp->t_termios.c_cc[c] != _POSIX_VDISABLE) \
|
|
breakc[n++] = tp->t_termios.c_cc[c]; \
|
|
} while (0)
|
|
/* Determine which characters we should trigger on. */
|
|
BREAK_ADD(VEOF);
|
|
BREAK_ADD(VEOL);
|
|
#undef BREAK_ADD
|
|
breakc[n] = '\0';
|
|
|
|
do {
|
|
error = tty_wait_background(tp, curthread, SIGTTIN);
|
|
if (error)
|
|
return (error);
|
|
|
|
/*
|
|
* Quite a tricky case: unlike the old TTY
|
|
* implementation, this implementation copies data back
|
|
* to userspace in large chunks. Unfortunately, we can't
|
|
* calculate the line length on beforehand if it crosses
|
|
* ttyinq_block boundaries, because multiple reads could
|
|
* then make this code read beyond the newline.
|
|
*
|
|
* This is why we limit the read to:
|
|
* - The size the user has requested
|
|
* - The blocksize (done in tty_inq.c)
|
|
* - The amount of bytes until the newline
|
|
*
|
|
* This causes the line length to be recalculated after
|
|
* each block has been copied to userspace. This will
|
|
* cause the TTY layer to return data in chunks using
|
|
* the blocksize (except the first and last blocks).
|
|
*/
|
|
clen = ttyinq_findchar(&tp->t_inq, breakc, uio->uio_resid,
|
|
&lastc);
|
|
|
|
/* No more data. */
|
|
if (clen == 0) {
|
|
if (tp->t_flags & TF_ZOMBIE)
|
|
return (0);
|
|
else if (ioflag & IO_NDELAY)
|
|
return (EWOULDBLOCK);
|
|
|
|
error = tty_wait(tp, &tp->t_inwait);
|
|
if (error)
|
|
return (error);
|
|
continue;
|
|
}
|
|
|
|
/* Don't send the EOF char back to userspace. */
|
|
if (CMP_CC(VEOF, lastc))
|
|
flen = 1;
|
|
|
|
MPASS(flen <= clen);
|
|
|
|
/* Read and throw away the EOF character. */
|
|
error = ttyinq_read_uio(&tp->t_inq, tp, uio, clen, flen);
|
|
if (error)
|
|
return (error);
|
|
|
|
} while (uio->uio_resid > 0 && lastc == _POSIX_VDISABLE);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ttydisc_read_raw_no_timer(struct tty *tp, struct uio *uio, int ioflag)
|
|
{
|
|
size_t vmin = tp->t_termios.c_cc[VMIN];
|
|
ssize_t oresid = uio->uio_resid;
|
|
int error;
|
|
|
|
MPASS(tp->t_termios.c_cc[VTIME] == 0);
|
|
|
|
/*
|
|
* This routine implements the easy cases of read()s while in
|
|
* non-canonical mode, namely case B and D, where we don't have
|
|
* any timers at all.
|
|
*/
|
|
|
|
for (;;) {
|
|
error = tty_wait_background(tp, curthread, SIGTTIN);
|
|
if (error)
|
|
return (error);
|
|
|
|
error = ttyinq_read_uio(&tp->t_inq, tp, uio,
|
|
uio->uio_resid, 0);
|
|
if (error)
|
|
return (error);
|
|
if (uio->uio_resid == 0 || (oresid - uio->uio_resid) >= vmin)
|
|
return (0);
|
|
|
|
/* We have to wait for more. */
|
|
if (tp->t_flags & TF_ZOMBIE)
|
|
return (0);
|
|
else if (ioflag & IO_NDELAY)
|
|
return (EWOULDBLOCK);
|
|
|
|
error = tty_wait(tp, &tp->t_inwait);
|
|
if (error)
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
static int
|
|
ttydisc_read_raw_read_timer(struct tty *tp, struct uio *uio, int ioflag,
|
|
int oresid)
|
|
{
|
|
size_t vmin = MAX(tp->t_termios.c_cc[VMIN], 1);
|
|
unsigned int vtime = tp->t_termios.c_cc[VTIME];
|
|
struct timeval end, now, left;
|
|
int error, hz;
|
|
|
|
MPASS(tp->t_termios.c_cc[VTIME] != 0);
|
|
|
|
/* Determine when the read should be expired. */
|
|
end.tv_sec = vtime / 10;
|
|
end.tv_usec = (vtime % 10) * 100000;
|
|
getmicrotime(&now);
|
|
timevaladd(&end, &now);
|
|
|
|
for (;;) {
|
|
error = tty_wait_background(tp, curthread, SIGTTIN);
|
|
if (error)
|
|
return (error);
|
|
|
|
error = ttyinq_read_uio(&tp->t_inq, tp, uio,
|
|
uio->uio_resid, 0);
|
|
if (error)
|
|
return (error);
|
|
if (uio->uio_resid == 0 || (oresid - uio->uio_resid) >= vmin)
|
|
return (0);
|
|
|
|
/* Calculate how long we should wait. */
|
|
getmicrotime(&now);
|
|
if (timevalcmp(&now, &end, >))
|
|
return (0);
|
|
left = end;
|
|
timevalsub(&left, &now);
|
|
hz = tvtohz(&left);
|
|
|
|
/*
|
|
* We have to wait for more. If the timer expires, we
|
|
* should return a 0-byte read.
|
|
*/
|
|
if (tp->t_flags & TF_ZOMBIE)
|
|
return (0);
|
|
else if (ioflag & IO_NDELAY)
|
|
return (EWOULDBLOCK);
|
|
|
|
error = tty_timedwait(tp, &tp->t_inwait, hz);
|
|
if (error)
|
|
return (error == EWOULDBLOCK ? 0 : error);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ttydisc_read_raw_interbyte_timer(struct tty *tp, struct uio *uio, int ioflag)
|
|
{
|
|
size_t vmin = tp->t_termios.c_cc[VMIN];
|
|
ssize_t oresid = uio->uio_resid;
|
|
int error;
|
|
|
|
MPASS(tp->t_termios.c_cc[VMIN] != 0);
|
|
MPASS(tp->t_termios.c_cc[VTIME] != 0);
|
|
|
|
/*
|
|
* When using the interbyte timer, the timer should be started
|
|
* after the first byte has been received. We just call into the
|
|
* generic read timer code after we've received the first byte.
|
|
*/
|
|
|
|
for (;;) {
|
|
error = tty_wait_background(tp, curthread, SIGTTIN);
|
|
if (error)
|
|
return (error);
|
|
|
|
error = ttyinq_read_uio(&tp->t_inq, tp, uio,
|
|
uio->uio_resid, 0);
|
|
if (error)
|
|
return (error);
|
|
if (uio->uio_resid == 0 || (oresid - uio->uio_resid) >= vmin)
|
|
return (0);
|
|
|
|
/*
|
|
* Not enough data, but we did receive some, which means
|
|
* we'll now start using the interbyte timer.
|
|
*/
|
|
if (oresid != uio->uio_resid)
|
|
break;
|
|
|
|
/* We have to wait for more. */
|
|
if (tp->t_flags & TF_ZOMBIE)
|
|
return (0);
|
|
else if (ioflag & IO_NDELAY)
|
|
return (EWOULDBLOCK);
|
|
|
|
error = tty_wait(tp, &tp->t_inwait);
|
|
if (error)
|
|
return (error);
|
|
}
|
|
|
|
return ttydisc_read_raw_read_timer(tp, uio, ioflag, oresid);
|
|
}
|
|
|
|
int
|
|
ttydisc_read(struct tty *tp, struct uio *uio, int ioflag)
|
|
{
|
|
int error;
|
|
|
|
tty_lock_assert(tp, MA_OWNED);
|
|
|
|
if (uio->uio_resid == 0)
|
|
return (0);
|
|
|
|
if (CMP_FLAG(l, ICANON))
|
|
error = ttydisc_read_canonical(tp, uio, ioflag);
|
|
else if (tp->t_termios.c_cc[VTIME] == 0)
|
|
error = ttydisc_read_raw_no_timer(tp, uio, ioflag);
|
|
else if (tp->t_termios.c_cc[VMIN] == 0)
|
|
error = ttydisc_read_raw_read_timer(tp, uio, ioflag,
|
|
uio->uio_resid);
|
|
else
|
|
error = ttydisc_read_raw_interbyte_timer(tp, uio, ioflag);
|
|
|
|
if (ttyinq_bytesleft(&tp->t_inq) >= tp->t_inlow ||
|
|
ttyinq_bytescanonicalized(&tp->t_inq) == 0) {
|
|
/* Unset the input watermark when we've got enough space. */
|
|
tty_hiwat_in_unblock(tp);
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static __inline unsigned int
|
|
ttydisc_findchar(const char *obstart, unsigned int oblen)
|
|
{
|
|
const char *c = obstart;
|
|
|
|
while (oblen--) {
|
|
if (CTL_VALID(*c))
|
|
break;
|
|
c++;
|
|
}
|
|
|
|
return (c - obstart);
|
|
}
|
|
|
|
static int
|
|
ttydisc_write_oproc(struct tty *tp, char c)
|
|
{
|
|
unsigned int scnt, error;
|
|
|
|
MPASS(CMP_FLAG(o, OPOST));
|
|
MPASS(CTL_VALID(c));
|
|
|
|
#define PRINT_NORMAL() ttyoutq_write_nofrag(&tp->t_outq, &c, 1)
|
|
switch (c) {
|
|
case CEOF:
|
|
/* End-of-text dropping. */
|
|
if (CMP_FLAG(o, ONOEOT))
|
|
return (0);
|
|
return PRINT_NORMAL();
|
|
|
|
case CERASE2:
|
|
/* Handle backspace to fix tab expansion. */
|
|
if (PRINT_NORMAL() != 0)
|
|
return (-1);
|
|
if (tp->t_column > 0)
|
|
tp->t_column--;
|
|
return (0);
|
|
|
|
case CTAB:
|
|
/* Tab expansion. */
|
|
scnt = 8 - (tp->t_column & 7);
|
|
if (CMP_FLAG(o, TAB3)) {
|
|
error = ttyoutq_write_nofrag(&tp->t_outq,
|
|
" ", scnt);
|
|
} else {
|
|
error = PRINT_NORMAL();
|
|
}
|
|
if (error)
|
|
return (-1);
|
|
|
|
tp->t_column += scnt;
|
|
MPASS((tp->t_column % 8) == 0);
|
|
return (0);
|
|
|
|
case CNL:
|
|
/* Newline conversion. */
|
|
if (CMP_FLAG(o, ONLCR)) {
|
|
/* Convert \n to \r\n. */
|
|
error = ttyoutq_write_nofrag(&tp->t_outq, "\r\n", 2);
|
|
} else {
|
|
error = PRINT_NORMAL();
|
|
}
|
|
if (error)
|
|
return (-1);
|
|
|
|
if (CMP_FLAG(o, ONLCR|ONLRET)) {
|
|
tp->t_column = tp->t_writepos = 0;
|
|
ttyinq_reprintpos_set(&tp->t_inq);
|
|
}
|
|
return (0);
|
|
|
|
case CCR:
|
|
/* Carriage return to newline conversion. */
|
|
if (CMP_FLAG(o, OCRNL))
|
|
c = CNL;
|
|
/* Omit carriage returns on column 0. */
|
|
if (CMP_FLAG(o, ONOCR) && tp->t_column == 0)
|
|
return (0);
|
|
if (PRINT_NORMAL() != 0)
|
|
return (-1);
|
|
|
|
tp->t_column = tp->t_writepos = 0;
|
|
ttyinq_reprintpos_set(&tp->t_inq);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Invisible control character. Print it, but don't
|
|
* increase the column count.
|
|
*/
|
|
return PRINT_NORMAL();
|
|
#undef PRINT_NORMAL
|
|
}
|
|
|
|
/*
|
|
* Just like the old TTY implementation, we need to copy data in chunks
|
|
* into a temporary buffer. One of the reasons why we need to do this,
|
|
* is because output processing (only TAB3 though) may allow the buffer
|
|
* to grow eight times.
|
|
*/
|
|
int
|
|
ttydisc_write(struct tty *tp, struct uio *uio, int ioflag)
|
|
{
|
|
char ob[TTY_STACKBUF];
|
|
char *obstart;
|
|
int error = 0;
|
|
unsigned int oblen = 0;
|
|
|
|
tty_lock_assert(tp, MA_OWNED);
|
|
|
|
if (tp->t_flags & TF_ZOMBIE)
|
|
return (EIO);
|
|
|
|
/*
|
|
* We don't need to check whether the process is the foreground
|
|
* process group or if we have a carrier. This is already done
|
|
* in ttydev_write().
|
|
*/
|
|
|
|
while (uio->uio_resid > 0) {
|
|
unsigned int nlen;
|
|
|
|
MPASS(oblen == 0);
|
|
|
|
/* Step 1: read data. */
|
|
obstart = ob;
|
|
nlen = MIN(uio->uio_resid, sizeof ob);
|
|
tty_unlock(tp);
|
|
error = uiomove(ob, nlen, uio);
|
|
tty_lock(tp);
|
|
if (error != 0)
|
|
break;
|
|
oblen = nlen;
|
|
|
|
if (tty_gone(tp)) {
|
|
error = ENXIO;
|
|
break;
|
|
}
|
|
|
|
MPASS(oblen > 0);
|
|
|
|
/* Step 2: process data. */
|
|
do {
|
|
unsigned int plen, wlen;
|
|
|
|
/* Search for special characters for post processing. */
|
|
if (CMP_FLAG(o, OPOST)) {
|
|
plen = ttydisc_findchar(obstart, oblen);
|
|
} else {
|
|
plen = oblen;
|
|
}
|
|
|
|
if (plen == 0) {
|
|
/*
|
|
* We're going to process a character
|
|
* that needs processing
|
|
*/
|
|
if (ttydisc_write_oproc(tp, *obstart) == 0) {
|
|
obstart++;
|
|
oblen--;
|
|
|
|
tp->t_writepos = tp->t_column;
|
|
ttyinq_reprintpos_set(&tp->t_inq);
|
|
continue;
|
|
}
|
|
} else {
|
|
/* We're going to write regular data. */
|
|
wlen = ttyoutq_write(&tp->t_outq, obstart, plen);
|
|
obstart += wlen;
|
|
oblen -= wlen;
|
|
tp->t_column += wlen;
|
|
|
|
tp->t_writepos = tp->t_column;
|
|
ttyinq_reprintpos_set(&tp->t_inq);
|
|
|
|
if (wlen == plen)
|
|
continue;
|
|
}
|
|
|
|
/* Watermark reached. Try to sleep. */
|
|
tp->t_flags |= TF_HIWAT_OUT;
|
|
|
|
if (ioflag & IO_NDELAY) {
|
|
error = EWOULDBLOCK;
|
|
goto done;
|
|
}
|
|
|
|
/*
|
|
* The driver may write back the data
|
|
* synchronously. Be sure to check the high
|
|
* water mark before going to sleep.
|
|
*/
|
|
ttydevsw_outwakeup(tp);
|
|
if ((tp->t_flags & TF_HIWAT_OUT) == 0)
|
|
continue;
|
|
|
|
error = tty_wait(tp, &tp->t_outwait);
|
|
if (error)
|
|
goto done;
|
|
|
|
if (tp->t_flags & TF_ZOMBIE) {
|
|
error = EIO;
|
|
goto done;
|
|
}
|
|
} while (oblen > 0);
|
|
}
|
|
|
|
done:
|
|
if (!tty_gone(tp))
|
|
ttydevsw_outwakeup(tp);
|
|
|
|
/*
|
|
* Add the amount of bytes that we didn't process back to the
|
|
* uio counters. We need to do this to make sure write() doesn't
|
|
* count the bytes we didn't store in the queue.
|
|
*/
|
|
uio->uio_resid += oblen;
|
|
return (error);
|
|
}
|
|
|
|
void
|
|
ttydisc_optimize(struct tty *tp)
|
|
{
|
|
tty_lock_assert(tp, MA_OWNED);
|
|
|
|
if (ttyhook_hashook(tp, rint_bypass)) {
|
|
tp->t_flags |= TF_BYPASS;
|
|
} else if (ttyhook_hashook(tp, rint)) {
|
|
tp->t_flags &= ~TF_BYPASS;
|
|
} else if (!CMP_FLAG(i, ICRNL|IGNCR|IMAXBEL|INLCR|ISTRIP|IXON) &&
|
|
(!CMP_FLAG(i, BRKINT) || CMP_FLAG(i, IGNBRK)) &&
|
|
(!CMP_FLAG(i, PARMRK) ||
|
|
CMP_FLAG(i, IGNPAR|IGNBRK) == (IGNPAR|IGNBRK)) &&
|
|
!CMP_FLAG(l, ECHO|ICANON|IEXTEN|ISIG|PENDIN)) {
|
|
tp->t_flags |= TF_BYPASS;
|
|
} else {
|
|
tp->t_flags &= ~TF_BYPASS;
|
|
}
|
|
}
|
|
|
|
void
|
|
ttydisc_modem(struct tty *tp, int open)
|
|
{
|
|
|
|
tty_lock_assert(tp, MA_OWNED);
|
|
|
|
if (open)
|
|
cv_broadcast(&tp->t_dcdwait);
|
|
|
|
/*
|
|
* Ignore modem status lines when CLOCAL is turned on, but don't
|
|
* enter the zombie state when the TTY isn't opened, because
|
|
* that would cause the TTY to be in zombie state after being
|
|
* opened.
|
|
*/
|
|
if (!tty_opened(tp) || CMP_FLAG(c, CLOCAL))
|
|
return;
|
|
|
|
if (open == 0) {
|
|
/*
|
|
* Lost carrier.
|
|
*/
|
|
tp->t_flags |= TF_ZOMBIE;
|
|
|
|
tty_signal_sessleader(tp, SIGHUP);
|
|
tty_flush(tp, FREAD|FWRITE);
|
|
} else {
|
|
/*
|
|
* Carrier is back again.
|
|
*/
|
|
|
|
/* XXX: what should we do here? */
|
|
}
|
|
}
|
|
|
|
static int
|
|
ttydisc_echo_force(struct tty *tp, char c, int quote)
|
|
{
|
|
|
|
if (CMP_FLAG(o, OPOST) && CTL_ECHO(c, quote)) {
|
|
/*
|
|
* Only perform postprocessing when OPOST is turned on
|
|
* and the character is an unquoted BS/TB/NL/CR.
|
|
*/
|
|
return ttydisc_write_oproc(tp, c);
|
|
} else if (CMP_FLAG(l, ECHOCTL) && CTL_PRINT(c, quote)) {
|
|
/*
|
|
* Only use ^X notation when ECHOCTL is turned on and
|
|
* we've got an quoted control character.
|
|
*
|
|
* Print backspaces when echoing an end-of-file.
|
|
*/
|
|
char ob[4] = "^?\b\b";
|
|
|
|
/* Print ^X notation. */
|
|
if (c != 0x7f)
|
|
ob[1] = c + 'A' - 1;
|
|
|
|
if (!quote && CMP_CC(VEOF, c)) {
|
|
return ttyoutq_write_nofrag(&tp->t_outq, ob, 4);
|
|
} else {
|
|
tp->t_column += 2;
|
|
return ttyoutq_write_nofrag(&tp->t_outq, ob, 2);
|
|
}
|
|
} else {
|
|
/* Can just be printed. */
|
|
tp->t_column++;
|
|
return ttyoutq_write_nofrag(&tp->t_outq, &c, 1);
|
|
}
|
|
}
|
|
|
|
static int
|
|
ttydisc_echo(struct tty *tp, char c, int quote)
|
|
{
|
|
|
|
/*
|
|
* Only echo characters when ECHO is turned on, or ECHONL when
|
|
* the character is an unquoted newline.
|
|
*/
|
|
if (!CMP_FLAG(l, ECHO) &&
|
|
(!CMP_FLAG(l, ECHONL) || c != CNL || quote))
|
|
return (0);
|
|
|
|
return ttydisc_echo_force(tp, c, quote);
|
|
}
|
|
|
|
static void
|
|
ttydisc_reprint_char(void *d, char c, int quote)
|
|
{
|
|
struct tty *tp = d;
|
|
|
|
ttydisc_echo(tp, c, quote);
|
|
}
|
|
|
|
static void
|
|
ttydisc_reprint(struct tty *tp)
|
|
{
|
|
cc_t c;
|
|
|
|
/* Print ^R\n, followed by the line. */
|
|
c = tp->t_termios.c_cc[VREPRINT];
|
|
if (c != _POSIX_VDISABLE)
|
|
ttydisc_echo(tp, c, 0);
|
|
ttydisc_echo(tp, CNL, 0);
|
|
ttyinq_reprintpos_reset(&tp->t_inq);
|
|
|
|
ttyinq_line_iterate_from_linestart(&tp->t_inq, ttydisc_reprint_char, tp);
|
|
}
|
|
|
|
struct ttydisc_recalc_length {
|
|
struct tty *tp;
|
|
unsigned int curlen;
|
|
};
|
|
|
|
static void
|
|
ttydisc_recalc_charlength(void *d, char c, int quote)
|
|
{
|
|
struct ttydisc_recalc_length *data = d;
|
|
struct tty *tp = data->tp;
|
|
|
|
if (CTL_PRINT(c, quote)) {
|
|
if (CMP_FLAG(l, ECHOCTL))
|
|
data->curlen += 2;
|
|
} else if (c == CTAB) {
|
|
data->curlen += 8 - (data->curlen & 7);
|
|
} else {
|
|
data->curlen++;
|
|
}
|
|
}
|
|
|
|
static unsigned int
|
|
ttydisc_recalc_linelength(struct tty *tp)
|
|
{
|
|
struct ttydisc_recalc_length data = { tp, tp->t_writepos };
|
|
|
|
ttyinq_line_iterate_from_reprintpos(&tp->t_inq,
|
|
ttydisc_recalc_charlength, &data);
|
|
return (data.curlen);
|
|
}
|
|
|
|
static int
|
|
ttydisc_rubchar(struct tty *tp)
|
|
{
|
|
char c;
|
|
int quote;
|
|
unsigned int prevpos, tablen;
|
|
|
|
if (ttyinq_peekchar(&tp->t_inq, &c, "e) != 0)
|
|
return (-1);
|
|
ttyinq_unputchar(&tp->t_inq);
|
|
|
|
if (CMP_FLAG(l, ECHO)) {
|
|
/*
|
|
* Remove the character from the screen. This is even
|
|
* safe for characters that span multiple characters
|
|
* (tabs, quoted, etc).
|
|
*/
|
|
if (tp->t_writepos >= tp->t_column) {
|
|
/* Retype the sentence. */
|
|
ttydisc_reprint(tp);
|
|
} else if (CMP_FLAG(l, ECHOE)) {
|
|
if (CTL_PRINT(c, quote)) {
|
|
/* Remove ^X formatted chars. */
|
|
if (CMP_FLAG(l, ECHOCTL)) {
|
|
tp->t_column -= 2;
|
|
ttyoutq_write_nofrag(&tp->t_outq,
|
|
"\b\b \b\b", 6);
|
|
}
|
|
} else if (c == ' ') {
|
|
/* Space character needs no rubbing. */
|
|
tp->t_column -= 1;
|
|
ttyoutq_write_nofrag(&tp->t_outq, "\b", 1);
|
|
} else if (c == CTAB) {
|
|
/*
|
|
* Making backspace work with tabs is
|
|
* quite hard. Recalculate the length of
|
|
* this character and remove it.
|
|
*
|
|
* Because terminal settings could be
|
|
* changed while the line is being
|
|
* inserted, the calculations don't have
|
|
* to be correct. Make sure we keep the
|
|
* tab length within proper bounds.
|
|
*/
|
|
prevpos = ttydisc_recalc_linelength(tp);
|
|
if (prevpos >= tp->t_column)
|
|
tablen = 1;
|
|
else
|
|
tablen = tp->t_column - prevpos;
|
|
if (tablen > 8)
|
|
tablen = 8;
|
|
|
|
tp->t_column = prevpos;
|
|
ttyoutq_write_nofrag(&tp->t_outq,
|
|
"\b\b\b\b\b\b\b\b", tablen);
|
|
return (0);
|
|
} else {
|
|
/*
|
|
* Remove a regular character by
|
|
* punching a space over it.
|
|
*/
|
|
tp->t_column -= 1;
|
|
ttyoutq_write_nofrag(&tp->t_outq, "\b \b", 3);
|
|
}
|
|
} else {
|
|
/* Don't print spaces. */
|
|
ttydisc_echo(tp, tp->t_termios.c_cc[VERASE], 0);
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ttydisc_rubword(struct tty *tp)
|
|
{
|
|
char c;
|
|
int quote, alnum;
|
|
|
|
/* Strip whitespace first. */
|
|
for (;;) {
|
|
if (ttyinq_peekchar(&tp->t_inq, &c, "e) != 0)
|
|
return;
|
|
if (!CTL_WHITE(c))
|
|
break;
|
|
ttydisc_rubchar(tp);
|
|
}
|
|
|
|
/*
|
|
* Record whether the last character from the previous iteration
|
|
* was alphanumeric or not. We need this to implement ALTWERASE.
|
|
*/
|
|
alnum = CTL_ALNUM(c);
|
|
for (;;) {
|
|
ttydisc_rubchar(tp);
|
|
|
|
if (ttyinq_peekchar(&tp->t_inq, &c, "e) != 0)
|
|
return;
|
|
if (CTL_WHITE(c))
|
|
return;
|
|
if (CMP_FLAG(l, ALTWERASE) && CTL_ALNUM(c) != alnum)
|
|
return;
|
|
}
|
|
}
|
|
|
|
int
|
|
ttydisc_rint(struct tty *tp, char c, int flags)
|
|
{
|
|
int signal, quote = 0;
|
|
char ob[3] = { 0xff, 0x00 };
|
|
size_t ol;
|
|
|
|
tty_lock_assert(tp, MA_OWNED);
|
|
|
|
atomic_add_long(&tty_nin, 1);
|
|
|
|
if (ttyhook_hashook(tp, rint))
|
|
return ttyhook_rint(tp, c, flags);
|
|
|
|
if (tp->t_flags & TF_BYPASS)
|
|
goto processed;
|
|
|
|
if (flags) {
|
|
if (flags & TRE_BREAK) {
|
|
if (CMP_FLAG(i, IGNBRK)) {
|
|
/* Ignore break characters. */
|
|
return (0);
|
|
} else if (CMP_FLAG(i, BRKINT)) {
|
|
/* Generate SIGINT on break. */
|
|
tty_flush(tp, FREAD|FWRITE);
|
|
tty_signal_pgrp(tp, SIGINT);
|
|
return (0);
|
|
} else {
|
|
/* Just print it. */
|
|
goto parmrk;
|
|
}
|
|
} else if (flags & TRE_FRAMING ||
|
|
(flags & TRE_PARITY && CMP_FLAG(i, INPCK))) {
|
|
if (CMP_FLAG(i, IGNPAR)) {
|
|
/* Ignore bad characters. */
|
|
return (0);
|
|
} else {
|
|
/* Just print it. */
|
|
goto parmrk;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Allow any character to perform a wakeup. */
|
|
if (CMP_FLAG(i, IXANY))
|
|
tp->t_flags &= ~TF_STOPPED;
|
|
|
|
/* Remove the top bit. */
|
|
if (CMP_FLAG(i, ISTRIP))
|
|
c &= ~0x80;
|
|
|
|
/* Skip input processing when we want to print it literally. */
|
|
if (tp->t_flags & TF_LITERAL) {
|
|
tp->t_flags &= ~TF_LITERAL;
|
|
quote = 1;
|
|
goto processed;
|
|
}
|
|
|
|
/* Special control characters that are implementation dependent. */
|
|
if (CMP_FLAG(l, IEXTEN)) {
|
|
/* Accept the next character as literal. */
|
|
if (CMP_CC(VLNEXT, c)) {
|
|
if (CMP_FLAG(l, ECHO)) {
|
|
if (CMP_FLAG(l, ECHOE))
|
|
ttyoutq_write_nofrag(&tp->t_outq, "^\b", 2);
|
|
else
|
|
ttydisc_echo(tp, c, 0);
|
|
}
|
|
tp->t_flags |= TF_LITERAL;
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle signal processing.
|
|
*/
|
|
if (CMP_FLAG(l, ISIG)) {
|
|
if (CMP_FLAG(l, ICANON|IEXTEN) == (ICANON|IEXTEN)) {
|
|
if (CMP_CC(VSTATUS, c)) {
|
|
tty_signal_pgrp(tp, SIGINFO);
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* When compared to the old implementation, this
|
|
* implementation also flushes the output queue. POSIX
|
|
* is really brief about this, but does makes us assume
|
|
* we have to do so.
|
|
*/
|
|
signal = 0;
|
|
if (CMP_CC(VINTR, c)) {
|
|
signal = SIGINT;
|
|
} else if (CMP_CC(VQUIT, c)) {
|
|
signal = SIGQUIT;
|
|
} else if (CMP_CC(VSUSP, c)) {
|
|
signal = SIGTSTP;
|
|
}
|
|
|
|
if (signal != 0) {
|
|
/*
|
|
* Echo the character before signalling the
|
|
* processes.
|
|
*/
|
|
if (!CMP_FLAG(l, NOFLSH))
|
|
tty_flush(tp, FREAD|FWRITE);
|
|
ttydisc_echo(tp, c, 0);
|
|
tty_signal_pgrp(tp, signal);
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle start/stop characters.
|
|
*/
|
|
if (CMP_FLAG(i, IXON)) {
|
|
if (CMP_CC(VSTOP, c)) {
|
|
/* Stop it if we aren't stopped yet. */
|
|
if ((tp->t_flags & TF_STOPPED) == 0) {
|
|
tp->t_flags |= TF_STOPPED;
|
|
return (0);
|
|
}
|
|
/*
|
|
* Fallthrough:
|
|
* When VSTART == VSTOP, we should make this key
|
|
* toggle it.
|
|
*/
|
|
if (!CMP_CC(VSTART, c))
|
|
return (0);
|
|
}
|
|
if (CMP_CC(VSTART, c)) {
|
|
tp->t_flags &= ~TF_STOPPED;
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
/* Conversion of CR and NL. */
|
|
switch (c) {
|
|
case CCR:
|
|
if (CMP_FLAG(i, IGNCR))
|
|
return (0);
|
|
if (CMP_FLAG(i, ICRNL))
|
|
c = CNL;
|
|
break;
|
|
case CNL:
|
|
if (CMP_FLAG(i, INLCR))
|
|
c = CCR;
|
|
break;
|
|
}
|
|
|
|
/* Canonical line editing. */
|
|
if (CMP_FLAG(l, ICANON)) {
|
|
if (CMP_CC(VERASE, c) || CMP_CC(VERASE2, c)) {
|
|
ttydisc_rubchar(tp);
|
|
return (0);
|
|
} else if (CMP_CC(VKILL, c)) {
|
|
while (ttydisc_rubchar(tp) == 0);
|
|
return (0);
|
|
} else if (CMP_FLAG(l, IEXTEN)) {
|
|
if (CMP_CC(VWERASE, c)) {
|
|
ttydisc_rubword(tp);
|
|
return (0);
|
|
} else if (CMP_CC(VREPRINT, c)) {
|
|
ttydisc_reprint(tp);
|
|
return (0);
|
|
}
|
|
}
|
|
}
|
|
|
|
processed:
|
|
if (CMP_FLAG(i, PARMRK) && (unsigned char)c == 0xff) {
|
|
/* Print 0xff 0xff. */
|
|
ob[1] = 0xff;
|
|
ol = 2;
|
|
quote = 1;
|
|
} else {
|
|
ob[0] = c;
|
|
ol = 1;
|
|
}
|
|
|
|
goto print;
|
|
|
|
parmrk:
|
|
if (CMP_FLAG(i, PARMRK)) {
|
|
/* Prepend 0xff 0x00 0x.. */
|
|
ob[2] = c;
|
|
ol = 3;
|
|
quote = 1;
|
|
} else {
|
|
ob[0] = c;
|
|
ol = 1;
|
|
}
|
|
|
|
print:
|
|
/* See if we can store this on the input queue. */
|
|
if (ttyinq_write_nofrag(&tp->t_inq, ob, ol, quote) != 0) {
|
|
if (CMP_FLAG(i, IMAXBEL))
|
|
ttyoutq_write_nofrag(&tp->t_outq, "\a", 1);
|
|
|
|
/*
|
|
* Prevent a deadlock here. It may be possible that a
|
|
* user has entered so much data, there is no data
|
|
* available to read(), but the buffers are full anyway.
|
|
*
|
|
* Only enter the high watermark if the device driver
|
|
* can actually transmit something.
|
|
*/
|
|
if (ttyinq_bytescanonicalized(&tp->t_inq) == 0)
|
|
return (0);
|
|
|
|
tty_hiwat_in_block(tp);
|
|
return (-1);
|
|
}
|
|
|
|
/*
|
|
* In raw mode, we canonicalize after receiving a single
|
|
* character. Otherwise, we canonicalize when we receive a
|
|
* newline, VEOL or VEOF, but only when it isn't quoted.
|
|
*/
|
|
if (!CMP_FLAG(l, ICANON) ||
|
|
(!quote && (c == CNL || CMP_CC(VEOL, c) || CMP_CC(VEOF, c)))) {
|
|
ttyinq_canonicalize(&tp->t_inq);
|
|
}
|
|
|
|
ttydisc_echo(tp, c, quote);
|
|
|
|
return (0);
|
|
}
|
|
|
|
size_t
|
|
ttydisc_rint_simple(struct tty *tp, const void *buf, size_t len)
|
|
{
|
|
const char *cbuf;
|
|
|
|
if (ttydisc_can_bypass(tp))
|
|
return (ttydisc_rint_bypass(tp, buf, len));
|
|
|
|
for (cbuf = buf; len-- > 0; cbuf++) {
|
|
if (ttydisc_rint(tp, *cbuf, 0) != 0)
|
|
break;
|
|
}
|
|
|
|
return (cbuf - (const char *)buf);
|
|
}
|
|
|
|
size_t
|
|
ttydisc_rint_bypass(struct tty *tp, const void *buf, size_t len)
|
|
{
|
|
size_t ret;
|
|
|
|
tty_lock_assert(tp, MA_OWNED);
|
|
|
|
MPASS(tp->t_flags & TF_BYPASS);
|
|
|
|
atomic_add_long(&tty_nin, len);
|
|
|
|
if (ttyhook_hashook(tp, rint_bypass))
|
|
return ttyhook_rint_bypass(tp, buf, len);
|
|
|
|
ret = ttyinq_write(&tp->t_inq, buf, len, 0);
|
|
ttyinq_canonicalize(&tp->t_inq);
|
|
if (ret < len)
|
|
tty_hiwat_in_block(tp);
|
|
|
|
return (ret);
|
|
}
|
|
|
|
void
|
|
ttydisc_rint_done(struct tty *tp)
|
|
{
|
|
|
|
tty_lock_assert(tp, MA_OWNED);
|
|
|
|
if (ttyhook_hashook(tp, rint_done))
|
|
ttyhook_rint_done(tp);
|
|
|
|
/* Wake up readers. */
|
|
tty_wakeup(tp, FREAD);
|
|
/* Wake up driver for echo. */
|
|
ttydevsw_outwakeup(tp);
|
|
}
|
|
|
|
size_t
|
|
ttydisc_rint_poll(struct tty *tp)
|
|
{
|
|
size_t l;
|
|
|
|
tty_lock_assert(tp, MA_OWNED);
|
|
|
|
if (ttyhook_hashook(tp, rint_poll))
|
|
return ttyhook_rint_poll(tp);
|
|
|
|
/*
|
|
* XXX: Still allow character input when there's no space in the
|
|
* buffers, but we haven't entered the high watermark. This is
|
|
* to allow backspace characters to be inserted when in
|
|
* canonical mode.
|
|
*/
|
|
l = ttyinq_bytesleft(&tp->t_inq);
|
|
if (l == 0 && (tp->t_flags & TF_HIWAT_IN) == 0)
|
|
return (1);
|
|
|
|
return (l);
|
|
}
|
|
|
|
static void
|
|
ttydisc_wakeup_watermark(struct tty *tp)
|
|
{
|
|
size_t c;
|
|
|
|
c = ttyoutq_bytesleft(&tp->t_outq);
|
|
if (tp->t_flags & TF_HIWAT_OUT) {
|
|
/* Only allow us to run when we're below the watermark. */
|
|
if (c < tp->t_outlow)
|
|
return;
|
|
|
|
/* Reset the watermark. */
|
|
tp->t_flags &= ~TF_HIWAT_OUT;
|
|
} else {
|
|
/* Only run when we have data at all. */
|
|
if (c == 0)
|
|
return;
|
|
}
|
|
tty_wakeup(tp, FWRITE);
|
|
}
|
|
|
|
size_t
|
|
ttydisc_getc(struct tty *tp, void *buf, size_t len)
|
|
{
|
|
|
|
tty_lock_assert(tp, MA_OWNED);
|
|
|
|
if (tp->t_flags & TF_STOPPED)
|
|
return (0);
|
|
|
|
if (ttyhook_hashook(tp, getc_inject))
|
|
return ttyhook_getc_inject(tp, buf, len);
|
|
|
|
len = ttyoutq_read(&tp->t_outq, buf, len);
|
|
|
|
if (ttyhook_hashook(tp, getc_capture))
|
|
ttyhook_getc_capture(tp, buf, len);
|
|
|
|
ttydisc_wakeup_watermark(tp);
|
|
atomic_add_long(&tty_nout, len);
|
|
|
|
return (len);
|
|
}
|
|
|
|
int
|
|
ttydisc_getc_uio(struct tty *tp, struct uio *uio)
|
|
{
|
|
int error = 0;
|
|
ssize_t obytes = uio->uio_resid;
|
|
size_t len;
|
|
char buf[TTY_STACKBUF];
|
|
|
|
tty_lock_assert(tp, MA_OWNED);
|
|
|
|
if (tp->t_flags & TF_STOPPED)
|
|
return (0);
|
|
|
|
/*
|
|
* When a TTY hook is attached, we cannot perform unbuffered
|
|
* copying to userspace. Just call ttydisc_getc() and
|
|
* temporarily store data in a shadow buffer.
|
|
*/
|
|
if (ttyhook_hashook(tp, getc_capture) ||
|
|
ttyhook_hashook(tp, getc_inject)) {
|
|
while (uio->uio_resid > 0) {
|
|
/* Read to shadow buffer. */
|
|
len = ttydisc_getc(tp, buf,
|
|
MIN(uio->uio_resid, sizeof buf));
|
|
if (len == 0)
|
|
break;
|
|
|
|
/* Copy to userspace. */
|
|
tty_unlock(tp);
|
|
error = uiomove(buf, len, uio);
|
|
tty_lock(tp);
|
|
|
|
if (error != 0)
|
|
break;
|
|
}
|
|
} else {
|
|
error = ttyoutq_read_uio(&tp->t_outq, tp, uio);
|
|
|
|
ttydisc_wakeup_watermark(tp);
|
|
atomic_add_long(&tty_nout, obytes - uio->uio_resid);
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
size_t
|
|
ttydisc_getc_poll(struct tty *tp)
|
|
{
|
|
|
|
tty_lock_assert(tp, MA_OWNED);
|
|
|
|
if (tp->t_flags & TF_STOPPED)
|
|
return (0);
|
|
|
|
if (ttyhook_hashook(tp, getc_poll))
|
|
return ttyhook_getc_poll(tp);
|
|
|
|
return ttyoutq_bytesused(&tp->t_outq);
|
|
}
|
|
|
|
/*
|
|
* XXX: not really related to the TTYDISC, but we'd better put
|
|
* tty_putchar() here, because we need to perform proper output
|
|
* processing.
|
|
*/
|
|
|
|
int
|
|
tty_putchar(struct tty *tp, char c)
|
|
{
|
|
tty_lock_assert(tp, MA_OWNED);
|
|
|
|
if (tty_gone(tp))
|
|
return (-1);
|
|
|
|
ttydisc_echo_force(tp, c, 0);
|
|
tp->t_writepos = tp->t_column;
|
|
ttyinq_reprintpos_set(&tp->t_inq);
|
|
|
|
ttydevsw_outwakeup(tp);
|
|
return (0);
|
|
}
|