freebsd-skq

History

se 364b813321 Add consistency check to the functions that map port or memory ranges: Return failure, if the enable bit corresponding to the map type has not been set in the command register. This feature was requested by Justin Gibbs, who pointed out that some early PCI to PCI bridges do not correctly support memory windows (I assume because of the risk of deadlocks that have been taken care of in the PCI 2.2 spec) and that some BIOS clears the memory address decode enable bit in the command register of the PCI device, if it finds them behind such a bridge.		1997-05-28 10:10:02 +00:00
..
aic7870.c
brktree_reg.h	1.15 4/18/97 John-Mark Gurney <gurney_j@resnet.uoregon.edu>	1997-05-01 00:16:31 +00:00
brooktree848.c	use frames instead of fields, and restore full meteor compatibility for	1997-05-05 20:54:54 +00:00
bt9xx.c
cy_pci.c
cy_pcireg.h
dc21040.h
if_de.c
if_ed_p.c
if_en_pci.c	import Chuck Cranor's ATM driver	1997-05-09 07:48:14 +00:00
if_fpa.c
if_fxp.c
if_fxpreg.h
if_lnc_p.c
if_sr_p.c
if_vx_pci.c
locate.pl
meteor_reg.h
meteor.c
ncr.c
ncrreg.h	Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not	1997-02-22 09:48:43 +00:00
pci_compat.c	Add consistency check to the functions that map port or memory ranges:	1997-05-28 10:10:02 +00:00
pci_ioctl.h
pci.c	Two minor changes to the code that builds the pci map array:	1997-05-28 10:01:03 +00:00
pcireg.h	Completely replace the PCI bus driver code to make it better reflect	1997-05-26 15:08:43 +00:00
pcisupport.c	Completely replace the PCI bus driver code to make it better reflect	1997-05-26 15:08:43 +00:00
pcivar.h	Completely replace the PCI bus driver code to make it better reflect	1997-05-26 15:08:43 +00:00
README.bt848	Fixed omission of reference to ioctl_bt848.h when installing on 2.2.	1997-05-01 00:42:54 +00:00
README.de
README.de-le
scsiiom.c
tek390.c	Completely replace the PCI bus driver code to make it better reflect	1997-05-26 15:08:43 +00:00
tek390.h
wd82371.c
wd82371reg.h
wdc_p.c

README.de-le

$Id$

----------------

The enclosed drivers should be considered beta-test software.  These
drivers are in no way supported by Digital Equipment.  See the
disclaimers in the sources for more information.  Please be aware that
Digital does not employee me to write drivers for FreeBSD.

This kit contains one driver:

	de	DEC DE435 PCI NIC or compatible

See README.de for information and installation instruction specific to this
driver.

Could you please send me the startup messages in the boot
long along with the type of your PC once the driver configures?  

If you have any problems, comments, suggestions, rant or raves, don't
hesitate to send me mail @ thomas@lkg.dec.com.

Lastly, if you change or modify the code, I want context diffs of your
changes.  I want this to the canonical DEC EtherWORKS driver kit for
FreeBSD, NetBSD, BSD/386, and any other BSD based O/S.  Please make
sure your diffs are approriate conditionalized.

Thanks,
Matt Thomas
--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/