6c43e10684
Reviewed by: bde
1057 lines
24 KiB
C
1057 lines
24 KiB
C
/*
|
|
* Copyright (c) 1996 John S. Dyson
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice immediately at the beginning of the file, without modification,
|
|
* this list of conditions, and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Absolutely no warranty of function or purpose is made by the author
|
|
* John S. Dyson.
|
|
* 4. Modifications may be freely made to this file if the above conditions
|
|
* are met.
|
|
*
|
|
* $Id: sys_pipe.c,v 1.17 1996/06/17 05:15:01 dyson Exp $
|
|
*/
|
|
|
|
#ifndef OLD_PIPE
|
|
|
|
/*
|
|
* This file contains a high-performance replacement for the socket-based
|
|
* pipes scheme originally used in FreeBSD/4.4Lite. It does not support
|
|
* all features of sockets, but does do everything that pipes normally
|
|
* do.
|
|
*/
|
|
|
|
/*
|
|
* This code has two modes of operation, a small write mode and a large
|
|
* write mode. The small write mode acts like conventional pipes with
|
|
* a kernel buffer. If the buffer is less than PIPE_MINDIRECT, then the
|
|
* "normal" pipe buffering is done. If the buffer is between PIPE_MINDIRECT
|
|
* and PIPE_SIZE in size, it is fully mapped and wired into the kernel, and
|
|
* the receiving process can copy it directly from the pages in the sending
|
|
* process.
|
|
*
|
|
* If the sending process receives a signal, it is possible that it will
|
|
* go away, and certainly its address space can change, because control
|
|
* is returned back to the user-mode side. In that case, the pipe code
|
|
* arranges to copy the buffer supplied by the user process, to a pageable
|
|
* kernel buffer, and the receiving process will grab the data from the
|
|
* pageable kernel buffer. Since signals don't happen all that often,
|
|
* the copy operation is normally eliminated.
|
|
*
|
|
* The constant PIPE_MINDIRECT is chosen to make sure that buffering will
|
|
* happen for small transfers so that the system will not spend all of
|
|
* its time context switching. PIPE_SIZE is constrained by the
|
|
* amount of kernel virtual memory.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/file.h>
|
|
#include <sys/protosw.h>
|
|
#include <sys/stat.h>
|
|
#include <sys/filedesc.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/stat.h>
|
|
#include <sys/select.h>
|
|
#include <sys/signalvar.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/vmmeter.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/sysproto.h>
|
|
#include <sys/pipe.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_prot.h>
|
|
#include <vm/vm_param.h>
|
|
#include <vm/lock.h>
|
|
#include <vm/vm_object.h>
|
|
#include <vm/vm_kern.h>
|
|
#include <vm/vm_extern.h>
|
|
#include <vm/pmap.h>
|
|
#include <vm/vm_map.h>
|
|
#include <vm/vm_page.h>
|
|
|
|
/*
|
|
* Use this define if you want to disable *fancy* VM things. Expect an
|
|
* approx 30% decrease in transfer rate. This could be useful for
|
|
* NetBSD or OpenBSD.
|
|
*/
|
|
/* #define PIPE_NODIRECT */
|
|
|
|
/*
|
|
* interfaces to the outside world
|
|
*/
|
|
static int pipe_read __P((struct file *fp, struct uio *uio,
|
|
struct ucred *cred));
|
|
static int pipe_write __P((struct file *fp, struct uio *uio,
|
|
struct ucred *cred));
|
|
static int pipe_close __P((struct file *fp, struct proc *p));
|
|
static int pipe_select __P((struct file *fp, int which, struct proc *p));
|
|
static int pipe_ioctl __P((struct file *fp, int cmd, caddr_t data, struct proc *p));
|
|
|
|
static struct fileops pipeops =
|
|
{ pipe_read, pipe_write, pipe_ioctl, pipe_select, pipe_close };
|
|
|
|
/*
|
|
* Default pipe buffer size(s), this can be kind-of large now because pipe
|
|
* space is pageable. The pipe code will try to maintain locality of
|
|
* reference for performance reasons, so small amounts of outstanding I/O
|
|
* will not wipe the cache.
|
|
*/
|
|
#define MINPIPESIZE (PIPE_SIZE/3)
|
|
#define MAXPIPESIZE (2*PIPE_SIZE/3)
|
|
|
|
/*
|
|
* Maximum amount of kva for pipes -- this is kind-of a soft limit, but
|
|
* is there so that on large systems, we don't exhaust it.
|
|
*/
|
|
#define MAXPIPEKVA (8*1024*1024)
|
|
|
|
/*
|
|
* Limit for direct transfers, we cannot, of course limit
|
|
* the amount of kva for pipes in general though.
|
|
*/
|
|
#define LIMITPIPEKVA (16*1024*1024)
|
|
int amountpipekva;
|
|
|
|
static void pipeclose __P((struct pipe *cpipe));
|
|
static void pipeinit __P((struct pipe *cpipe));
|
|
static __inline int pipelock __P((struct pipe *cpipe, int catch));
|
|
static __inline void pipeunlock __P((struct pipe *cpipe));
|
|
static __inline void pipeselwakeup __P((struct pipe *cpipe));
|
|
#ifndef PIPE_NODIRECT
|
|
static int pipe_build_write_buffer __P((struct pipe *wpipe, struct uio *uio));
|
|
static void pipe_destroy_write_buffer __P((struct pipe *wpipe));
|
|
static int pipe_direct_write __P((struct pipe *wpipe, struct uio *uio));
|
|
static void pipe_clone_write_buffer __P((struct pipe *wpipe));
|
|
#endif
|
|
static void pipespace __P((struct pipe *cpipe));
|
|
|
|
/*
|
|
* The pipe system call for the DTYPE_PIPE type of pipes
|
|
*/
|
|
|
|
/* ARGSUSED */
|
|
int
|
|
pipe(p, uap, retval)
|
|
struct proc *p;
|
|
struct pipe_args /* {
|
|
int dummy;
|
|
} */ *uap;
|
|
int retval[];
|
|
{
|
|
register struct filedesc *fdp = p->p_fd;
|
|
struct file *rf, *wf;
|
|
struct pipe *rpipe, *wpipe;
|
|
int fd, error;
|
|
|
|
rpipe = malloc( sizeof (*rpipe), M_TEMP, M_WAITOK);
|
|
pipeinit(rpipe);
|
|
rpipe->pipe_state |= PIPE_DIRECTOK;
|
|
wpipe = malloc( sizeof (*wpipe), M_TEMP, M_WAITOK);
|
|
pipeinit(wpipe);
|
|
wpipe->pipe_state |= PIPE_DIRECTOK;
|
|
|
|
error = falloc(p, &rf, &fd);
|
|
if (error)
|
|
goto free2;
|
|
retval[0] = fd;
|
|
rf->f_flag = FREAD | FWRITE;
|
|
rf->f_type = DTYPE_PIPE;
|
|
rf->f_ops = &pipeops;
|
|
rf->f_data = (caddr_t)rpipe;
|
|
error = falloc(p, &wf, &fd);
|
|
if (error)
|
|
goto free3;
|
|
wf->f_flag = FREAD | FWRITE;
|
|
wf->f_type = DTYPE_PIPE;
|
|
wf->f_ops = &pipeops;
|
|
wf->f_data = (caddr_t)wpipe;
|
|
retval[1] = fd;
|
|
|
|
rpipe->pipe_peer = wpipe;
|
|
wpipe->pipe_peer = rpipe;
|
|
|
|
return (0);
|
|
free3:
|
|
ffree(rf);
|
|
fdp->fd_ofiles[retval[0]] = 0;
|
|
free2:
|
|
(void)pipeclose(wpipe);
|
|
(void)pipeclose(rpipe);
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Allocate kva for pipe circular buffer, the space is pageable
|
|
*/
|
|
static void
|
|
pipespace(cpipe)
|
|
struct pipe *cpipe;
|
|
{
|
|
int npages, error;
|
|
|
|
npages = round_page(cpipe->pipe_buffer.size)/PAGE_SIZE;
|
|
/*
|
|
* Create an object, I don't like the idea of paging to/from
|
|
* kernel_object.
|
|
* XXX -- minor change needed here for NetBSD/OpenBSD VM systems.
|
|
*/
|
|
cpipe->pipe_buffer.object = vm_object_allocate(OBJT_DEFAULT, npages);
|
|
cpipe->pipe_buffer.buffer = (caddr_t) vm_map_min(kernel_map);
|
|
|
|
/*
|
|
* Insert the object into the kernel map, and allocate kva for it.
|
|
* The map entry is, by default, pageable.
|
|
* XXX -- minor change needed here for NetBSD/OpenBSD VM systems.
|
|
*/
|
|
error = vm_map_find(kernel_map, cpipe->pipe_buffer.object, 0,
|
|
(vm_offset_t *) &cpipe->pipe_buffer.buffer,
|
|
cpipe->pipe_buffer.size, 1,
|
|
VM_PROT_ALL, VM_PROT_ALL, 0);
|
|
|
|
if (error != KERN_SUCCESS)
|
|
panic("pipeinit: cannot allocate pipe -- out of kvm -- code = %d", error);
|
|
amountpipekva += cpipe->pipe_buffer.size;
|
|
}
|
|
|
|
/*
|
|
* initialize and allocate VM and memory for pipe
|
|
*/
|
|
static void
|
|
pipeinit(cpipe)
|
|
struct pipe *cpipe;
|
|
{
|
|
int s;
|
|
|
|
cpipe->pipe_buffer.in = 0;
|
|
cpipe->pipe_buffer.out = 0;
|
|
cpipe->pipe_buffer.cnt = 0;
|
|
cpipe->pipe_buffer.size = PIPE_SIZE;
|
|
/* Buffer kva gets dynamically allocated */
|
|
cpipe->pipe_buffer.buffer = NULL;
|
|
|
|
cpipe->pipe_state = 0;
|
|
cpipe->pipe_peer = NULL;
|
|
cpipe->pipe_busy = 0;
|
|
s = splhigh();
|
|
cpipe->pipe_ctime = time;
|
|
cpipe->pipe_atime = time;
|
|
cpipe->pipe_mtime = time;
|
|
splx(s);
|
|
bzero(&cpipe->pipe_sel, sizeof cpipe->pipe_sel);
|
|
|
|
#ifndef PIPE_NODIRECT
|
|
/*
|
|
* pipe data structure initializations to support direct pipe I/O
|
|
*/
|
|
cpipe->pipe_map.cnt = 0;
|
|
cpipe->pipe_map.kva = 0;
|
|
cpipe->pipe_map.pos = 0;
|
|
cpipe->pipe_map.npages = 0;
|
|
#endif
|
|
}
|
|
|
|
|
|
/*
|
|
* lock a pipe for I/O, blocking other access
|
|
*/
|
|
static __inline int
|
|
pipelock(cpipe, catch)
|
|
struct pipe *cpipe;
|
|
int catch;
|
|
{
|
|
int error;
|
|
while (cpipe->pipe_state & PIPE_LOCK) {
|
|
cpipe->pipe_state |= PIPE_LWANT;
|
|
if (error = tsleep( cpipe,
|
|
catch?(PRIBIO|PCATCH):PRIBIO, "pipelk", 0)) {
|
|
return error;
|
|
}
|
|
}
|
|
cpipe->pipe_state |= PIPE_LOCK;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* unlock a pipe I/O lock
|
|
*/
|
|
static __inline void
|
|
pipeunlock(cpipe)
|
|
struct pipe *cpipe;
|
|
{
|
|
cpipe->pipe_state &= ~PIPE_LOCK;
|
|
if (cpipe->pipe_state & PIPE_LWANT) {
|
|
cpipe->pipe_state &= ~PIPE_LWANT;
|
|
wakeup(cpipe);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static __inline void
|
|
pipeselwakeup(cpipe)
|
|
struct pipe *cpipe;
|
|
{
|
|
if (cpipe->pipe_state & PIPE_SEL) {
|
|
cpipe->pipe_state &= ~PIPE_SEL;
|
|
selwakeup(&cpipe->pipe_sel);
|
|
}
|
|
}
|
|
|
|
#ifndef PIPE_NODIRECT
|
|
#if 0
|
|
static void
|
|
pipe_mark_pages_clean(cpipe)
|
|
struct pipe *cpipe;
|
|
{
|
|
vm_size_t off;
|
|
vm_page_t m;
|
|
|
|
for(off = 0; off < cpipe->pipe_buffer.object->size; off += 1) {
|
|
m = vm_page_lookup(cpipe->pipe_buffer.object, off);
|
|
if ((m != NULL) && (m->busy == 0) && (m->flags & PG_BUSY) == 0) {
|
|
m->dirty = 0;
|
|
pmap_clear_modify(VM_PAGE_TO_PHYS(m));
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
#endif
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
pipe_read(fp, uio, cred)
|
|
struct file *fp;
|
|
struct uio *uio;
|
|
struct ucred *cred;
|
|
{
|
|
|
|
struct pipe *rpipe = (struct pipe *) fp->f_data;
|
|
int error = 0;
|
|
int nread = 0;
|
|
int size;
|
|
|
|
++rpipe->pipe_busy;
|
|
while (uio->uio_resid) {
|
|
/*
|
|
* normal pipe buffer receive
|
|
*/
|
|
if (rpipe->pipe_buffer.cnt > 0) {
|
|
int size = rpipe->pipe_buffer.size - rpipe->pipe_buffer.out;
|
|
if (size > rpipe->pipe_buffer.cnt)
|
|
size = rpipe->pipe_buffer.cnt;
|
|
if (size > uio->uio_resid)
|
|
size = uio->uio_resid;
|
|
if ((error = pipelock(rpipe,1)) == 0) {
|
|
error = uiomove( &rpipe->pipe_buffer.buffer[rpipe->pipe_buffer.out],
|
|
size, uio);
|
|
pipeunlock(rpipe);
|
|
}
|
|
if (error) {
|
|
break;
|
|
}
|
|
rpipe->pipe_buffer.out += size;
|
|
if (rpipe->pipe_buffer.out >= rpipe->pipe_buffer.size)
|
|
rpipe->pipe_buffer.out = 0;
|
|
|
|
rpipe->pipe_buffer.cnt -= size;
|
|
nread += size;
|
|
#ifndef PIPE_NODIRECT
|
|
/*
|
|
* Direct copy, bypassing a kernel buffer.
|
|
*/
|
|
} else if ((size = rpipe->pipe_map.cnt) &&
|
|
(rpipe->pipe_state & PIPE_DIRECTW)) {
|
|
caddr_t va;
|
|
if (size > uio->uio_resid)
|
|
size = uio->uio_resid;
|
|
if ((error = pipelock(rpipe,1)) == 0) {
|
|
va = (caddr_t) rpipe->pipe_map.kva + rpipe->pipe_map.pos;
|
|
error = uiomove(va, size, uio);
|
|
pipeunlock(rpipe);
|
|
}
|
|
if (error)
|
|
break;
|
|
nread += size;
|
|
rpipe->pipe_map.pos += size;
|
|
rpipe->pipe_map.cnt -= size;
|
|
if (rpipe->pipe_map.cnt == 0) {
|
|
rpipe->pipe_state &= ~PIPE_DIRECTW;
|
|
wakeup(rpipe);
|
|
}
|
|
#endif
|
|
} else {
|
|
/*
|
|
* detect EOF condition
|
|
*/
|
|
if (rpipe->pipe_state & PIPE_EOF) {
|
|
/* XXX error = ? */
|
|
break;
|
|
}
|
|
/*
|
|
* If the "write-side" has been blocked, wake it up now.
|
|
*/
|
|
if (rpipe->pipe_state & PIPE_WANTW) {
|
|
rpipe->pipe_state &= ~PIPE_WANTW;
|
|
wakeup(rpipe);
|
|
}
|
|
if (nread > 0)
|
|
break;
|
|
|
|
if (fp->f_flag & FNONBLOCK) {
|
|
error = EAGAIN;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* If there is no more to read in the pipe, reset
|
|
* its pointers to the beginning. This improves
|
|
* cache hit stats.
|
|
*/
|
|
|
|
if ((error = pipelock(rpipe,1)) == 0) {
|
|
if (rpipe->pipe_buffer.cnt == 0) {
|
|
rpipe->pipe_buffer.in = 0;
|
|
rpipe->pipe_buffer.out = 0;
|
|
}
|
|
pipeunlock(rpipe);
|
|
} else {
|
|
break;
|
|
}
|
|
|
|
if (rpipe->pipe_state & PIPE_WANTW) {
|
|
rpipe->pipe_state &= ~PIPE_WANTW;
|
|
wakeup(rpipe);
|
|
}
|
|
|
|
rpipe->pipe_state |= PIPE_WANTR;
|
|
if (error = tsleep(rpipe, PRIBIO|PCATCH, "piperd", 0)) {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (error == 0) {
|
|
int s = splhigh();
|
|
rpipe->pipe_atime = time;
|
|
splx(s);
|
|
}
|
|
|
|
--rpipe->pipe_busy;
|
|
if ((rpipe->pipe_busy == 0) && (rpipe->pipe_state & PIPE_WANT)) {
|
|
rpipe->pipe_state &= ~(PIPE_WANT|PIPE_WANTW);
|
|
wakeup(rpipe);
|
|
} else if (rpipe->pipe_buffer.cnt < MINPIPESIZE) {
|
|
/*
|
|
* If there is no more to read in the pipe, reset
|
|
* its pointers to the beginning. This improves
|
|
* cache hit stats.
|
|
*/
|
|
if ((error == 0) && (error = pipelock(rpipe,1)) == 0) {
|
|
if (rpipe->pipe_buffer.cnt == 0) {
|
|
#if 0
|
|
pipe_mark_pages_clean(rpipe);
|
|
#endif
|
|
rpipe->pipe_buffer.in = 0;
|
|
rpipe->pipe_buffer.out = 0;
|
|
}
|
|
pipeunlock(rpipe);
|
|
}
|
|
|
|
/*
|
|
* If the "write-side" has been blocked, wake it up now.
|
|
*/
|
|
if (rpipe->pipe_state & PIPE_WANTW) {
|
|
rpipe->pipe_state &= ~PIPE_WANTW;
|
|
wakeup(rpipe);
|
|
}
|
|
}
|
|
|
|
if ((rpipe->pipe_buffer.size - rpipe->pipe_buffer.cnt) >= PIPE_BUF)
|
|
pipeselwakeup(rpipe);
|
|
|
|
return error;
|
|
}
|
|
|
|
#ifndef PIPE_NODIRECT
|
|
/*
|
|
* Map the sending processes' buffer into kernel space and wire it.
|
|
* This is similar to a physical write operation.
|
|
*/
|
|
static int
|
|
pipe_build_write_buffer(wpipe, uio)
|
|
struct pipe *wpipe;
|
|
struct uio *uio;
|
|
{
|
|
int size;
|
|
int i;
|
|
vm_offset_t addr, endaddr, paddr;
|
|
|
|
size = uio->uio_iov->iov_len;
|
|
if (size > wpipe->pipe_buffer.size)
|
|
size = wpipe->pipe_buffer.size;
|
|
|
|
endaddr = round_page(uio->uio_iov->iov_base + size);
|
|
for(i = 0, addr = trunc_page(uio->uio_iov->iov_base);
|
|
addr < endaddr;
|
|
addr += PAGE_SIZE, i+=1) {
|
|
|
|
vm_page_t m;
|
|
|
|
vm_fault_quick( (caddr_t) addr, VM_PROT_READ);
|
|
paddr = pmap_kextract(addr);
|
|
if (!paddr) {
|
|
int j;
|
|
for(j=0;j<i;j++)
|
|
vm_page_unwire(wpipe->pipe_map.ms[j]);
|
|
return EFAULT;
|
|
}
|
|
|
|
m = PHYS_TO_VM_PAGE(paddr);
|
|
vm_page_wire(m);
|
|
wpipe->pipe_map.ms[i] = m;
|
|
}
|
|
|
|
/*
|
|
* set up the control block
|
|
*/
|
|
wpipe->pipe_map.npages = i;
|
|
wpipe->pipe_map.pos = ((vm_offset_t) uio->uio_iov->iov_base) & PAGE_MASK;
|
|
wpipe->pipe_map.cnt = size;
|
|
|
|
/*
|
|
* and map the buffer
|
|
*/
|
|
if (wpipe->pipe_map.kva == 0) {
|
|
/*
|
|
* We need to allocate space for an extra page because the
|
|
* address range might (will) span pages at times.
|
|
*/
|
|
wpipe->pipe_map.kva = kmem_alloc_pageable(kernel_map,
|
|
wpipe->pipe_buffer.size + PAGE_SIZE);
|
|
amountpipekva += wpipe->pipe_buffer.size + PAGE_SIZE;
|
|
}
|
|
pmap_qenter(wpipe->pipe_map.kva, wpipe->pipe_map.ms,
|
|
wpipe->pipe_map.npages);
|
|
|
|
/*
|
|
* and update the uio data
|
|
*/
|
|
|
|
uio->uio_iov->iov_len -= size;
|
|
uio->uio_iov->iov_base += size;
|
|
if (uio->uio_iov->iov_len == 0)
|
|
uio->uio_iov++;
|
|
uio->uio_resid -= size;
|
|
uio->uio_offset += size;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* unmap and unwire the process buffer
|
|
*/
|
|
static void
|
|
pipe_destroy_write_buffer(wpipe)
|
|
struct pipe *wpipe;
|
|
{
|
|
int i;
|
|
pmap_qremove(wpipe->pipe_map.kva, wpipe->pipe_map.npages);
|
|
|
|
if (wpipe->pipe_map.kva) {
|
|
if (amountpipekva > MAXPIPEKVA) {
|
|
vm_offset_t kva = wpipe->pipe_map.kva;
|
|
wpipe->pipe_map.kva = 0;
|
|
kmem_free(kernel_map, kva,
|
|
wpipe->pipe_buffer.size + PAGE_SIZE);
|
|
amountpipekva -= wpipe->pipe_buffer.size + PAGE_SIZE;
|
|
}
|
|
}
|
|
for (i=0;i<wpipe->pipe_map.npages;i++)
|
|
vm_page_unwire(wpipe->pipe_map.ms[i]);
|
|
}
|
|
|
|
/*
|
|
* In the case of a signal, the writing process might go away. This
|
|
* code copies the data into the circular buffer so that the source
|
|
* pages can be freed without loss of data.
|
|
*/
|
|
static void
|
|
pipe_clone_write_buffer(wpipe)
|
|
struct pipe *wpipe;
|
|
{
|
|
int size;
|
|
int pos;
|
|
|
|
size = wpipe->pipe_map.cnt;
|
|
pos = wpipe->pipe_map.pos;
|
|
bcopy((caddr_t) wpipe->pipe_map.kva+pos,
|
|
(caddr_t) wpipe->pipe_buffer.buffer,
|
|
size);
|
|
|
|
wpipe->pipe_buffer.in = size;
|
|
wpipe->pipe_buffer.out = 0;
|
|
wpipe->pipe_buffer.cnt = size;
|
|
wpipe->pipe_state &= ~PIPE_DIRECTW;
|
|
|
|
pipe_destroy_write_buffer(wpipe);
|
|
}
|
|
|
|
/*
|
|
* This implements the pipe buffer write mechanism. Note that only
|
|
* a direct write OR a normal pipe write can be pending at any given time.
|
|
* If there are any characters in the pipe buffer, the direct write will
|
|
* be deferred until the receiving process grabs all of the bytes from
|
|
* the pipe buffer. Then the direct mapping write is set-up.
|
|
*/
|
|
static int
|
|
pipe_direct_write(wpipe, uio)
|
|
struct pipe *wpipe;
|
|
struct uio *uio;
|
|
{
|
|
int error;
|
|
retry:
|
|
while (wpipe->pipe_state & PIPE_DIRECTW) {
|
|
if ( wpipe->pipe_state & PIPE_WANTR) {
|
|
wpipe->pipe_state &= ~PIPE_WANTR;
|
|
wakeup(wpipe);
|
|
}
|
|
wpipe->pipe_state |= PIPE_WANTW;
|
|
error = tsleep(wpipe,
|
|
PRIBIO|PCATCH, "pipdww", 0);
|
|
if (error)
|
|
goto error1;
|
|
if (wpipe->pipe_state & PIPE_EOF) {
|
|
error = EPIPE;
|
|
goto error1;
|
|
}
|
|
}
|
|
wpipe->pipe_map.cnt = 0; /* transfer not ready yet */
|
|
if (wpipe->pipe_buffer.cnt > 0) {
|
|
if ( wpipe->pipe_state & PIPE_WANTR) {
|
|
wpipe->pipe_state &= ~PIPE_WANTR;
|
|
wakeup(wpipe);
|
|
}
|
|
|
|
wpipe->pipe_state |= PIPE_WANTW;
|
|
error = tsleep(wpipe,
|
|
PRIBIO|PCATCH, "pipdwc", 0);
|
|
if (error)
|
|
goto error1;
|
|
if (wpipe->pipe_state & PIPE_EOF) {
|
|
error = EPIPE;
|
|
goto error1;
|
|
}
|
|
goto retry;
|
|
}
|
|
|
|
wpipe->pipe_state |= PIPE_DIRECTW;
|
|
|
|
error = pipe_build_write_buffer(wpipe, uio);
|
|
if (error) {
|
|
wpipe->pipe_state &= ~PIPE_DIRECTW;
|
|
goto error1;
|
|
}
|
|
|
|
error = 0;
|
|
while (!error && (wpipe->pipe_state & PIPE_DIRECTW)) {
|
|
if (wpipe->pipe_state & PIPE_EOF) {
|
|
pipelock(wpipe, 0);
|
|
pipe_destroy_write_buffer(wpipe);
|
|
pipeunlock(wpipe);
|
|
pipeselwakeup(wpipe);
|
|
error = EPIPE;
|
|
goto error1;
|
|
}
|
|
if (wpipe->pipe_state & PIPE_WANTR) {
|
|
wpipe->pipe_state &= ~PIPE_WANTR;
|
|
wakeup(wpipe);
|
|
}
|
|
pipeselwakeup(wpipe);
|
|
error = tsleep(wpipe, PRIBIO|PCATCH, "pipdwt", 0);
|
|
}
|
|
|
|
pipelock(wpipe,0);
|
|
if (wpipe->pipe_state & PIPE_DIRECTW) {
|
|
/*
|
|
* this bit of trickery substitutes a kernel buffer for
|
|
* the process that might be going away.
|
|
*/
|
|
pipe_clone_write_buffer(wpipe);
|
|
} else {
|
|
pipe_destroy_write_buffer(wpipe);
|
|
}
|
|
pipeunlock(wpipe);
|
|
return error;
|
|
|
|
error1:
|
|
wakeup(wpipe);
|
|
return error;
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
pipe_write(fp, uio, cred)
|
|
struct file *fp;
|
|
struct uio *uio;
|
|
struct ucred *cred;
|
|
{
|
|
int error = 0;
|
|
int orig_resid;
|
|
|
|
struct pipe *wpipe, *rpipe;
|
|
|
|
rpipe = (struct pipe *) fp->f_data;
|
|
wpipe = rpipe->pipe_peer;
|
|
|
|
/*
|
|
* detect loss of pipe read side, issue SIGPIPE if lost.
|
|
*/
|
|
if ((wpipe == NULL) || (wpipe->pipe_state & PIPE_EOF)) {
|
|
return EPIPE;
|
|
}
|
|
|
|
if( wpipe->pipe_buffer.buffer == NULL) {
|
|
if ((error = pipelock(wpipe,1)) == 0) {
|
|
pipespace(wpipe);
|
|
pipeunlock(wpipe);
|
|
} else {
|
|
return error;
|
|
}
|
|
}
|
|
|
|
++wpipe->pipe_busy;
|
|
orig_resid = uio->uio_resid;
|
|
while (uio->uio_resid) {
|
|
int space;
|
|
#ifndef PIPE_NODIRECT
|
|
/*
|
|
* If the transfer is large, we can gain performance if
|
|
* we do process-to-process copies directly.
|
|
* If the write is non-blocking, we don't use the
|
|
* direct write mechanism.
|
|
*/
|
|
if ((fp->f_flag & FNONBLOCK) == 0 &&
|
|
(amountpipekva < LIMITPIPEKVA) &&
|
|
(uio->uio_iov->iov_len >= PIPE_MINDIRECT)) {
|
|
error = pipe_direct_write( wpipe, uio);
|
|
if (error) {
|
|
break;
|
|
}
|
|
continue;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Pipe buffered writes cannot be coincidental with
|
|
* direct writes. We wait until the currently executing
|
|
* direct write is completed before we start filling the
|
|
* pipe buffer.
|
|
*/
|
|
retrywrite:
|
|
while (wpipe->pipe_state & PIPE_DIRECTW) {
|
|
if (wpipe->pipe_state & PIPE_WANTR) {
|
|
wpipe->pipe_state &= ~PIPE_WANTR;
|
|
wakeup(wpipe);
|
|
}
|
|
error = tsleep(wpipe,
|
|
PRIBIO|PCATCH, "pipbww", 0);
|
|
if (error)
|
|
break;
|
|
}
|
|
|
|
space = wpipe->pipe_buffer.size - wpipe->pipe_buffer.cnt;
|
|
|
|
/* Writes of size <= PIPE_BUF must be atomic. */
|
|
/* XXX perhaps they need to be contiguous to be atomic? */
|
|
if ((space < uio->uio_resid) && (orig_resid <= PIPE_BUF))
|
|
space = 0;
|
|
|
|
if (space > 0) {
|
|
int size = wpipe->pipe_buffer.size - wpipe->pipe_buffer.in;
|
|
if (size > space)
|
|
size = space;
|
|
if (size > uio->uio_resid)
|
|
size = uio->uio_resid;
|
|
if ((error = pipelock(wpipe,1)) == 0) {
|
|
/*
|
|
* It is possible for a direct write to
|
|
* slip in on us... handle it here...
|
|
*/
|
|
if (wpipe->pipe_state & PIPE_DIRECTW) {
|
|
pipeunlock(wpipe);
|
|
goto retrywrite;
|
|
}
|
|
error = uiomove( &wpipe->pipe_buffer.buffer[wpipe->pipe_buffer.in],
|
|
size, uio);
|
|
pipeunlock(wpipe);
|
|
}
|
|
if (error)
|
|
break;
|
|
|
|
wpipe->pipe_buffer.in += size;
|
|
if (wpipe->pipe_buffer.in >= wpipe->pipe_buffer.size)
|
|
wpipe->pipe_buffer.in = 0;
|
|
|
|
wpipe->pipe_buffer.cnt += size;
|
|
} else {
|
|
/*
|
|
* If the "read-side" has been blocked, wake it up now.
|
|
*/
|
|
if (wpipe->pipe_state & PIPE_WANTR) {
|
|
wpipe->pipe_state &= ~PIPE_WANTR;
|
|
wakeup(wpipe);
|
|
}
|
|
|
|
/*
|
|
* don't block on non-blocking I/O
|
|
*/
|
|
if (fp->f_flag & FNONBLOCK) {
|
|
error = EAGAIN;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* We have no more space and have something to offer,
|
|
* wake up selects.
|
|
*/
|
|
pipeselwakeup(wpipe);
|
|
|
|
wpipe->pipe_state |= PIPE_WANTW;
|
|
if (error = tsleep(wpipe, (PRIBIO+1)|PCATCH, "pipewr", 0)) {
|
|
break;
|
|
}
|
|
/*
|
|
* If read side wants to go away, we just issue a signal
|
|
* to ourselves.
|
|
*/
|
|
if (wpipe->pipe_state & PIPE_EOF) {
|
|
error = EPIPE;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
--wpipe->pipe_busy;
|
|
if ((wpipe->pipe_busy == 0) &&
|
|
(wpipe->pipe_state & PIPE_WANT)) {
|
|
wpipe->pipe_state &= ~(PIPE_WANT|PIPE_WANTR);
|
|
wakeup(wpipe);
|
|
} else if (wpipe->pipe_buffer.cnt > 0) {
|
|
/*
|
|
* If we have put any characters in the buffer, we wake up
|
|
* the reader.
|
|
*/
|
|
if (wpipe->pipe_state & PIPE_WANTR) {
|
|
wpipe->pipe_state &= ~PIPE_WANTR;
|
|
wakeup(wpipe);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Don't return EPIPE if I/O was successful
|
|
*/
|
|
if ((wpipe->pipe_buffer.cnt == 0) &&
|
|
(uio->uio_resid == 0) &&
|
|
(error == EPIPE))
|
|
error = 0;
|
|
|
|
if (error == 0) {
|
|
int s = splhigh();
|
|
wpipe->pipe_mtime = time;
|
|
splx(s);
|
|
}
|
|
/*
|
|
* We have something to offer,
|
|
* wake up select.
|
|
*/
|
|
if (wpipe->pipe_buffer.cnt)
|
|
pipeselwakeup(wpipe);
|
|
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* we implement a very minimal set of ioctls for compatibility with sockets.
|
|
*/
|
|
int
|
|
pipe_ioctl(fp, cmd, data, p)
|
|
struct file *fp;
|
|
int cmd;
|
|
register caddr_t data;
|
|
struct proc *p;
|
|
{
|
|
register struct pipe *mpipe = (struct pipe *)fp->f_data;
|
|
|
|
switch (cmd) {
|
|
|
|
case FIONBIO:
|
|
return (0);
|
|
|
|
case FIOASYNC:
|
|
if (*(int *)data) {
|
|
mpipe->pipe_state |= PIPE_ASYNC;
|
|
} else {
|
|
mpipe->pipe_state &= ~PIPE_ASYNC;
|
|
}
|
|
return (0);
|
|
|
|
case FIONREAD:
|
|
if (mpipe->pipe_state & PIPE_DIRECTW)
|
|
*(int *)data = mpipe->pipe_map.cnt;
|
|
else
|
|
*(int *)data = mpipe->pipe_buffer.cnt;
|
|
return (0);
|
|
|
|
case SIOCSPGRP:
|
|
mpipe->pipe_pgid = *(int *)data;
|
|
return (0);
|
|
|
|
case SIOCGPGRP:
|
|
*(int *)data = mpipe->pipe_pgid;
|
|
return (0);
|
|
|
|
}
|
|
return ENOSYS;
|
|
}
|
|
|
|
int
|
|
pipe_select(fp, which, p)
|
|
struct file *fp;
|
|
int which;
|
|
struct proc *p;
|
|
{
|
|
register struct pipe *rpipe = (struct pipe *)fp->f_data;
|
|
struct pipe *wpipe;
|
|
|
|
wpipe = rpipe->pipe_peer;
|
|
switch (which) {
|
|
|
|
case FREAD:
|
|
if ( (rpipe->pipe_state & PIPE_DIRECTW) ||
|
|
(rpipe->pipe_buffer.cnt > 0) ||
|
|
(rpipe->pipe_state & PIPE_EOF)) {
|
|
return (1);
|
|
}
|
|
selrecord(p, &rpipe->pipe_sel);
|
|
rpipe->pipe_state |= PIPE_SEL;
|
|
break;
|
|
|
|
case FWRITE:
|
|
if ((wpipe == NULL) ||
|
|
(wpipe->pipe_state & PIPE_EOF) ||
|
|
(((wpipe->pipe_state & PIPE_DIRECTW) == 0) &&
|
|
(wpipe->pipe_buffer.size - wpipe->pipe_buffer.cnt) >= PIPE_BUF)) {
|
|
return (1);
|
|
}
|
|
selrecord(p, &wpipe->pipe_sel);
|
|
wpipe->pipe_state |= PIPE_SEL;
|
|
break;
|
|
|
|
case 0:
|
|
if ((rpipe->pipe_state & PIPE_EOF) ||
|
|
(wpipe == NULL) ||
|
|
(wpipe->pipe_state & PIPE_EOF)) {
|
|
return (1);
|
|
}
|
|
|
|
selrecord(p, &rpipe->pipe_sel);
|
|
rpipe->pipe_state |= PIPE_SEL;
|
|
break;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
pipe_stat(pipe, ub)
|
|
register struct pipe *pipe;
|
|
register struct stat *ub;
|
|
{
|
|
bzero((caddr_t)ub, sizeof (*ub));
|
|
ub->st_mode = S_IFSOCK;
|
|
ub->st_blksize = pipe->pipe_buffer.size;
|
|
ub->st_size = pipe->pipe_buffer.cnt;
|
|
ub->st_blocks = (ub->st_size + ub->st_blksize - 1) / ub->st_blksize;
|
|
TIMEVAL_TO_TIMESPEC(&pipe->pipe_atime, &ub->st_atimespec);
|
|
TIMEVAL_TO_TIMESPEC(&pipe->pipe_mtime, &ub->st_mtimespec);
|
|
TIMEVAL_TO_TIMESPEC(&pipe->pipe_ctime, &ub->st_ctimespec);
|
|
return 0;
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
pipe_close(fp, p)
|
|
struct file *fp;
|
|
struct proc *p;
|
|
{
|
|
struct pipe *cpipe = (struct pipe *)fp->f_data;
|
|
|
|
pipeclose(cpipe);
|
|
fp->f_data = NULL;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* shutdown the pipe
|
|
*/
|
|
static void
|
|
pipeclose(cpipe)
|
|
struct pipe *cpipe;
|
|
{
|
|
struct pipe *ppipe;
|
|
if (cpipe) {
|
|
|
|
pipeselwakeup(cpipe);
|
|
|
|
/*
|
|
* If the other side is blocked, wake it up saying that
|
|
* we want to close it down.
|
|
*/
|
|
while (cpipe->pipe_busy) {
|
|
wakeup(cpipe);
|
|
cpipe->pipe_state |= PIPE_WANT|PIPE_EOF;
|
|
tsleep(cpipe, PRIBIO, "pipecl", 0);
|
|
}
|
|
|
|
/*
|
|
* Disconnect from peer
|
|
*/
|
|
if (ppipe = cpipe->pipe_peer) {
|
|
pipeselwakeup(ppipe);
|
|
|
|
ppipe->pipe_state |= PIPE_EOF;
|
|
wakeup(ppipe);
|
|
ppipe->pipe_peer = NULL;
|
|
}
|
|
|
|
/*
|
|
* free resources
|
|
*/
|
|
if (cpipe->pipe_buffer.buffer) {
|
|
amountpipekva -= cpipe->pipe_buffer.size;
|
|
kmem_free(kernel_map,
|
|
(vm_offset_t)cpipe->pipe_buffer.buffer,
|
|
cpipe->pipe_buffer.size);
|
|
}
|
|
#ifndef PIPE_NODIRECT
|
|
if (cpipe->pipe_map.kva) {
|
|
amountpipekva -= cpipe->pipe_buffer.size + PAGE_SIZE;
|
|
kmem_free(kernel_map,
|
|
cpipe->pipe_map.kva,
|
|
cpipe->pipe_buffer.size + PAGE_SIZE);
|
|
}
|
|
#endif
|
|
free(cpipe, M_TEMP);
|
|
}
|
|
}
|
|
#endif
|