freebsd-skq/sys/dev/cxgbe
np 371b2159dd cxgbe(4): Update T5 and T4 firmwares bundled with the driver to 1.14.4.0. The
changes in the firmwares since 1.11.27.0 are listed here (straight copy-paste
from the "Release Notes.txt" accompanying the Chelsio Unified Wire 2.11.1.0
release on the website).

22.1. T5 Firmware
+++++++++++++++++++++++++++++++++

Version : 1.14.4.0
Date    : 08/05/2015
================================================================================

FIXES
-----

BASE:
- Fixes a potential data path hang by properly programming PMTX congestion
  threshold settings.
- Fixes a potential initialization error when accessing a configuration file
  stored on the flash.
- Fixes a regression where SGE resources can be miss-sized if iWARP is disabled.

ETH:
- Fixes a timing issue that would prevent CR4 links from coming up with some
  switches.

FOFCoE:
- Defers fcoe linkdown mailbox command handling till LOGO is sent.
- Updates vlan prio for all outstanding IOs during dcbx update.

ENHANCEMENTS
------------

BASE:
- Adds support for PAUSE OFF watchdog.
- Reports devlog access information in PCIE_FW_PF register 7.

ETH:
- Enhances segmentation offload to include VxLAN and Geneve.
- Adds PTP support.
- Adds new interface to allow the driver to query the VI rss table base
  addresses.
- Allows the driver to program the SGE ingrext contxt CongDrop field.

OFLD:
- Adds new interface for the driver to specify offloaded connections TCP snd
  and rcv scale factors.

iSCSI:
- Adds support for iscsi segmentatation offload (ISO).
- Adds support for iscsi t10-dif offload.

FOiSCSI:
- Sets FORCE_BIT for cut through processing for FOiSCSI.

FOFCoE:
- Adds support for FCoE BB6.
- Improves WRITE performance.

================================================================================
================================================================================

Version : 1.13.32.0
Date    : 03/25/2015
================================================================================

FIXES
-----

BASE:
- Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of
   negative)
- Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain
   adapter configurations)
- Fixes config file based PL_TIMEOUT register programming

ETH:
- Fixes a potential EO UDP SEG header corruption
- Fixes an issue where 1000Base-X was not enabled correctly when using QSA
   modules

OFLD:
- Fixes timeout issue with half-open connections
- Fixes FW_FLOWC_WR processing when state is set to finwait1

FOFCoE:
- Fixes fcoe xchg leaks in linkdown/peer down path
- Fixes cleanup in FCoE linkdown and fixed buf timer flowid abuse
- Fixes fw crash by clearing fcf flowc during bye

FOiSCSI:
- Don't create a new tcp socket if ERL0 attempt has timed out.

ENHANCEMENTS
------------

BASE:
- Adds support for VFs on PFs 4 to 7
- Adds support for QPs/CQs on any physical and virtual function

ETH:
- Stops sending LACP frames on loopback interface
- Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE
- Adds support for CR4 links (BEAN/AEC on 40G TwinAx cables)

OFLD:
- Improves default settings of LAN and CLUSTER TCP timer settings
- Sends Negative Advice CPLs to software

FOISCSI:
- Adds IPv6 support for foiscsi. Keeps backward compatibility with
   old foiscsi drivers which doesn't support ipv6.

FOFCoE:
- Added fcoe debug support in flowc dump

================================================================================
================================================================================

Version : 1.12.25.0
Date    : 10/22/2014
================================================================================

FIXES
-----

BASE:
- Improves precision of the Weight Round Robing Traffic Management Algorithm
- Fixes an issue where the link would intermittently fail to come up
- Fixes an issue where adapters with an external PHY couldn't run at 100Mbps
- Fixes an issue where active optical cables were not recognized
- Fixes link advertising issues on T520-BT (speed and pause frames) that would
  cause the link to negotiate unexpected settings
- Forces link restart when auto-negotiation is disabled
- Fix an issue where pause frames wouldn't be fully disabled even if requested

ETH:
- Fixes NVGRE Segmentation Offload network header generation.

DCBX:
- Fixes an issue where some settings were not being sent to the switch
  correctly
- Fixes an issue where back-to-back DCBX port updates could get overwritten by
  FW
- Fixes a firmware crash on DCBX APP information request before link up

FOiSCSI:
- Fixes abort task leak in tmf response handling
- Fixes TCP RST handling while in iSCSI ERL0
- Fixes a firmware crash on BYE without INIT

ENHANCEMENTS
-------------

BASE:
- Adds link partner settings reporting when available
- Adds QSA support (in conjunction with QSA VPD)
- Adds T520-BT LED support
- Reports NOTSUPPORTED for modules with an unhandled identifier

DCBX:
- Adds version reporting (indicating which version FW is trying to negotiate)
- Adds IEEE support
- Reports LLDP time outs

FOiSCSI:
- Add support for multiple iSCSI DDP client
- Sends DHCP renew request when lease expires

================================================================================

22.2. T4 Firmware
+++++++++++++++++

Version : 1.14.4.0
Date    : 08/05/2015
================================================================================

FIXES
-----

BASE:
- Fixes a potential initialization error when accessing a configuration file
  stored on the flash.
- Initialize PCIE_DBG_INDIR_REQ.Enable to 0, as hardware failed to do so and
  register dumps could result in errors.

ETH:
- Fixes an issue that sometimes prevented the link from coming up in CR adapters.

ENHANCEMENTS
------------

BASE:
- Adds support for PAUSE OFF watchdog.
- Reports devlog access information in PCIE_FW_PF register 7.

ETH:
- Adds new interface to allow the driver to query the VI rss table base
  addresses.

OFLD:
- Adds new interface for the driver to specify offloaded connections TCP snd
  and rcv scale factors.

================================================================================
================================================================================

Version : 1.13.32.0
Date    : 03/25/2015
================================================================================

FIXES
-----

BASE:
- Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of
    negative)
- Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain
    adapter configurations)
- Fixes config file based PL_TIMEOUT register programming

ETH:
- Fixes a potential EO UDP SEG header corruption

OFLD:
- Fixes timeout issue with half-open connections
- Fixes FW_FLOWC_WR processing when state is set to finwait1

FOiSCSI:
- Don't create a new tcp socket if ERL0 attempt has timed out.

ENHANCEMENTS
------------

ETH:
- Stops sending LACP frames on loopback interface
- Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE

OFLD:
- Improves default settings of LAN and CLUSTER TCP timer settings
- Sends Negative Advice CPLs to software

================================================================================
================================================================================

Version : 1.12.25.0
Date    : 10/22/2014
================================================================================

FIXES
-----

BASE:
- Improves precision of the Weight Round Robing Traffic Management Algorithm
- Forces link restart when auto-negotiation is disabled
- Fix an issue where pause frames wouldn't be fully disabled even if requested

DCBX:
- Fixes an issue where some settings were not being sent to the switch
  correctly
- Fixes an issue where back-to-back DCBX port updates could get overwritten by
  FW
- Fixes a firmware crash on DCBX APP information request before link up

FOiSCSI:
- Fixes abort task leak in tmf response handling
- Fixes TCP RST handling while in iSCSI ERL0
- Fixes a firmware crash on BYE without INIT

ENHANCEMENTS
------------

BASE:
- Adds link partner settings reporting when available
- Firmware now reports NOTSUPPORTED for modules with an unhandled identifier

DCBX:
- Adds version reporting (indicating which version FW is trying to negotiate)
- Adds IEEE support
- Reports LLDP time outs

FOiSCSI:
- Adds support for multiple iSCSI DDP clients
- Sends DHCP renew request when lease expires

================================================================================

Obtained from:	Chelsio Communications
MFC after:	2 weeks
Sponsored by:	Chelsio Communications
2015-08-05 19:45:11 +00:00
..
common cxgbe(4): Ask the firmware for the start of the RSS slice for a port and 2015-07-17 06:46:18 +00:00
firmware cxgbe(4): Update T5 and T4 firmwares bundled with the driver to 1.14.4.0. The 2015-08-05 19:45:11 +00:00
iw_cxgbe Update the infiniband stack to Mellanox's OFED version 2.1. 2015-02-17 08:40:27 +00:00
tom Decompose TCP INP_INFO lock to increase short-lived TCP connections scalability: 2015-08-03 12:13:54 +00:00
adapter.h cxgbe(4): Ask the firmware for the start of the RSS slice for a port and 2015-07-17 06:46:18 +00:00
if_cxl.c cxgbe(4): Add a minimal if_cxl module that pulls in the real driver as 2015-02-06 01:10:04 +00:00
offload.h cxgbe(4): tidy up some of the interaction between the Upper Layer 2015-02-08 09:28:55 +00:00
osdep.h Add hooks in base cxgbe(4) for the iWARP upper-layer driver. Update a 2013-08-28 20:45:45 +00:00
t4_ioctl.h cxgbe(4): T4_SET_SCHED_CLASS and T4_SET_SCHED_QUEUE ioctls to program 2013-12-03 18:34:52 +00:00
t4_l2t.c Revert r279934, r279938; this is going to be fixed in sbuf instead. 2015-03-14 13:04:39 +00:00
t4_l2t.h cxgbe(4): Updates to the hardware L2 table management code. 2013-01-14 20:36:22 +00:00
t4_main.c cxgbe(4): initialize debug_flags from the kernel environment. 2015-07-31 04:50:47 +00:00
t4_mp_ring.c Allow cxgbe(4) to be built on i386. Driver attach will succeed only on a subset 2015-01-16 01:32:40 +00:00
t4_mp_ring.h cxgbe(4): major tx rework. 2014-12-31 23:19:16 +00:00
t4_netmap.c Sync netmap sources with the version in our private tree. 2015-07-10 05:51:36 +00:00
t4_sge.c cxgbe(4): Add a new knob that controls the congestion response of netmap 2015-07-06 20:56:59 +00:00
t4_tracer.c cxgbe(4): Remove stray if_up from the code that creates the tracing ifnet. 2014-05-23 01:45:44 +00:00