Remko Lodder ecf815ecf0 Add support for the Alcor Card Reader (9361) ... PR: 124656 Submitted by: Vincent Francois <vincentfrancois dot pro at gmail dot com> Approved by: imp (mentor, implicit) MFC after: 1 week		2008-08-21 20:37:38 +00:00
..
dsbr100io.h
ehci_pci.c	Use single byte read and write operations to toggle the BIOS and OS	2008-07-30 19:16:53 +00:00
ehci.c	Fix compile	2008-08-18 10:39:59 +00:00
ehcireg.h	Add isochronous transfer support for USB 2.0	2008-08-18 04:49:58 +00:00
ehcivar.h	Add isochronous transfer support for USB 2.0	2008-08-18 04:49:58 +00:00
FILES
hid.c	Fix a typo: According to the hid spec, Global item #3	2008-08-18 17:05:59 +00:00
hid.h
if_aue.c	Replace callout_init(..., 1) with callout_init(..., CALLOUT_MPSAFE) for	2008-04-16 16:47:14 +00:00
if_auereg.h
if_axe.c	From the OpenBSD commit log :	2008-05-13 14:00:09 +00:00
if_axereg.h	Add private tx/rx buffer management to support large frame sizes	2007-11-10 16:23:38 +00:00
if_cdce.c	Fix two more PRs:	2007-06-30 20:18:44 +00:00
if_cdcereg.h
if_cue.c	Note the Belkin F5U111 Adapter is covered by NETMATE entry.	2007-06-23 06:29:19 +00:00
if_cuereg.h
if_kue.c	Add a boatload of devices from OpenBSD and NetBSD to kue and cdce.	2007-06-23 06:47:43 +00:00
if_kuereg.h
if_rue.c	When all the other drivers were converted to scheduling a taskqueue to	2007-07-09 16:58:07 +00:00
if_ruereg.h	Missed in last commit: add usb task for rue to use for its ticks.	2007-07-09 20:56:39 +00:00
if_rum.c	Add the D-Link DWA-110	2008-08-19 01:44:56 +00:00
if_rumreg.h
if_rumvar.h	Multi-bss (aka vap) support for 802.11 devices.	2008-04-20 20:35:46 +00:00
if_udav.c	Add support for the Davicom DM9601.	2008-04-26 05:46:28 +00:00
if_udavreg.h
if_upgt.c	Add Conexant/Intersil PrismGT SoftMAC wireless USB driver - upgt(4).	2008-08-11 03:57:31 +00:00
if_upgtvar.h	Add Conexant/Intersil PrismGT SoftMAC wireless USB driver - upgt(4).	2008-08-11 03:57:31 +00:00
if_ural.c	Free the correct buffer list on failure.	2008-07-30 00:38:10 +00:00
if_uralreg.h
if_uralvar.h	Multi-bss (aka vap) support for 802.11 devices.	2008-04-20 20:35:46 +00:00
if_zyd.c	Change the calling convention for ic_node_alloc to deal with	2008-06-07 18:38:02 +00:00
if_zydfw.h	upgrade zd1211b firmware for the zyd driver. This solves a hardware	2007-11-03 19:24:51 +00:00
if_zydreg.h	Multi-bss (aka vap) support for 802.11 devices.	2008-04-20 20:35:46 +00:00
kue_fw.h
ohci_pci.c
ohci.c	Fix a benign typo that would give out an incorrect warning message.	2008-07-17 22:40:23 +00:00
ohcireg.h
ohcivar.h
rio500_usb.h
rt2573_ucode.h
sl811hs.c
sl811hsreg.h
sl811hsvar.h
slhci_pccard.c
uark.c	Allow arbitrary baud rates, not just the standard ones.	2008-01-26 04:30:48 +00:00
ubsa.c	Bring in support for the MC8755 Sierra UMTS card.	2008-08-20 13:14:58 +00:00
ubser.c	Prefer device_printf to printf("%s: ...", device_get_nameunit()). On	2007-07-05 06:42:14 +00:00
ubser.h
uchcom.c	Add Winchiphead (or Nanjin QinHeng Electronics) USB Serial converter driver.	2007-10-18 10:51:06 +00:00
ucom.c	Integrate the new MPSAFE TTY layer to the FreeBSD operating system.	2008-08-20 08:31:58 +00:00
ucomvar.h	Integrate the new MPSAFE TTY layer to the FreeBSD operating system.	2008-08-20 08:31:58 +00:00
ucycom.c
udbp.c	Prefer device_printf to printf + device_get_nameunit. This saves	2007-07-05 15:25:32 +00:00
udbp.h
ufm.c
ufoma.c	Make it easy to comment out the part that use current tty layer directly.	2008-08-18 11:56:13 +00:00
uftdi.c	Integrate the new MPSAFE TTY layer to the FreeBSD operating system.	2008-08-20 08:31:58 +00:00
uftdireg.h	Calculate baud rate divisor instead of allowing only a fixed set of	2008-01-25 02:41:44 +00:00
ugen.c	Don't include <sys/tty.h> in non-TTY drivers.	2008-07-24 09:54:10 +00:00
ugraphire_rdesc.h
uhci_pci.c	Identify ICH9 USB controllers.	2008-04-11 05:50:53 +00:00
uhci.c
uhcireg.h
uhcivar.h
uhid.c	Don't include <sys/tty.h> in non-TTY drivers.	2008-07-24 09:54:10 +00:00
uhub.c	Fix two more PRs:	2007-06-30 20:18:44 +00:00
uipaq.c	Add support for the ASUS P535 PDA	2008-08-02 12:15:18 +00:00
ukbd.c	Remove explicit calls to keyboard methods with their respective variants	2007-12-29 21:55:25 +00:00
ulpt.c
umass.c	Add support for the Alcor Card Reader (9361)	2008-08-21 20:37:38 +00:00
umct.c
umodem.c	Integrate the new MPSAFE TTY layer to the FreeBSD operating system.	2008-08-20 08:31:58 +00:00
ums.c	sc->sc_ibuf should be malloc'ed after quirks applied, as	2008-08-18 17:13:23 +00:00
uplcom.c	Add Belkin F5U257 to the mix.	2008-06-10 19:31:09 +00:00
urio.c
usb_ethersubr.c	Remove NETISR_MPSAFE, which allows specific netisr handlers to be directly	2008-07-04 00:21:38 +00:00
usb_ethersubr.h
usb_if.m
usb_mem.c
usb_mem.h
usb_port.h	Rename the kthread_xxx (e.g. kthread_create()) calls	2007-10-20 23:23:23 +00:00
usb_quirks.c	Add quirks for making uhid(4) ignore the Apple iPhone and iPhone 3G.	2008-08-09 22:25:13 +00:00
usb_quirks.h	Add support for various MS Wirless usb mice. the patch is from	2007-06-29 21:07:41 +00:00
usb_subr.c	Fix two more PRs:	2007-06-30 20:18:44 +00:00
usb.c	Drop Giant before calling kproc_exit(), so we don't trigger assertion in	2008-05-20 12:34:30 +00:00
usb.h	Add isochronous transfer support for USB 2.0	2008-08-18 04:49:58 +00:00
usbcdc.h
usbdevs	Add support for the Alcor Card Reader (9361)	2008-08-21 20:37:38 +00:00
usbdi_util.c
usbdi_util.h
usbdi.c	Correct cache handling for xfer requests marked URQ_REQUEST: many (if not	2008-03-20 16:04:13 +00:00
usbdi.h	add support for %b printing of request + xfer flags	2008-03-20 03:09:59 +00:00
usbdivar.h	add support for %b printing of request + xfer flags	2008-03-20 03:09:59 +00:00
usbhid.h
uscanner.c	Add USB ids for the Epson DX7400 / CX7300 multifunction scanner printer	2008-06-27 10:30:08 +00:00
uslcom.c	Oops, I accidently concatenated uslcom.[c4] multiple times before the	2008-03-05 14:18:29 +00:00
uvisor.c	Prefer device_printf to printf("%s:...", device_get_nameunit(),...);	2007-07-05 06:28:46 +00:00
uvscom.c	Prefer device_printf to printf("%s:...", device_get_nameunit(),...);	2007-07-05 06:28:46 +00:00
uxb360gp_rdesc.h	Change my email address to the one from the FreeBSD project.	2008-05-24 18:35:55 +00:00