freebsd-skq/sys/pci/pci.c
dfr 37dec27558 Add support for SYS_RES_DENSE and SYS_RES_BWX resource types. These are
equivalent to SYS_RES_MEMORY for x86 but for alpha, the rman_get_virtual()
address of the resource is initialised to point into either dense-mapped
or bwx-mapped space respectively, allowing direct memory pointers to be
used to device memory.

Reviewed by: Andrew Gallatin <gallatin@cs.duke.edu>
1999-07-28 07:57:48 +00:00

1512 lines
36 KiB
C

/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: pci.c,v 1.112 1999/07/27 05:08:36 mdodd Exp $
*
*/
#include "opt_bus.h"
#include "opt_devfs.h"
#include "opt_simos.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/fcntl.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/buf.h>
#ifdef DEVFS
#include <sys/devfsext.h>
#endif /* DEVFS */
#include <vm/vm.h>
#include <vm/pmap.h>
#include <vm/vm_extern.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <machine/md_var.h> /* For the Alpha */
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#include <pci/pci_ioctl.h>
#ifdef APIC_IO
#include <machine/smp.h>
#endif /* APIC_IO */
static STAILQ_HEAD(devlist, pci_devinfo) pci_devq;
u_int32_t pci_numdevs = 0;
static u_int32_t pci_generation = 0;
#define PCI_MFCTR_CHAR0(ID) (char)(((ID>>10) & 0x1F) | '@') /* Bits 10-14 */
#define PCI_MFCTR_CHAR1(ID) (char)(((ID>>5 ) & 0x1F) | '@') /* Bits 5-9 */
#define PCI_MFCTR_CHAR2(ID) (char)(( ID & 0x1F) | '@') /* Bits 0-4 */
/* return base address of memory or port map */
static int
pci_mapbase(unsigned mapreg)
{
int mask = 0x03;
if ((mapreg & 0x01) == 0)
mask = 0x0f;
return (mapreg & ~mask);
}
/* return map type of memory or port map */
static int
pci_maptype(unsigned mapreg)
{
static u_int8_t maptype[0x10] = {
PCI_MAPMEM, PCI_MAPPORT,
PCI_MAPMEM, 0,
PCI_MAPMEM, PCI_MAPPORT,
0, 0,
PCI_MAPMEM|PCI_MAPMEMP, PCI_MAPPORT,
PCI_MAPMEM|PCI_MAPMEMP, 0,
PCI_MAPMEM|PCI_MAPMEMP, PCI_MAPPORT,
0, 0,
};
return maptype[mapreg & 0x0f];
}
/* return log2 of map size decoded for memory or port map */
static int
pci_mapsize(unsigned testval)
{
int ln2size;
testval = pci_mapbase(testval);
ln2size = 0;
if (testval != 0) {
while ((testval & 1) == 0)
{
ln2size++;
testval >>= 1;
}
}
return (ln2size);
}
/* return log2 of address range supported by map register */
static int
pci_maprange(unsigned mapreg)
{
int ln2range = 0;
switch (mapreg & 0x07) {
case 0x00:
case 0x01:
case 0x05:
ln2range = 32;
break;
case 0x02:
ln2range = 20;
break;
case 0x04:
ln2range = 64;
break;
}
return (ln2range);
}
/* extract map parameters into newly allocated array of pcimap structures */
static pcimap *
pci_readmaps(pcicfgregs *cfg, int maxmaps)
{
int i, j = 0;
pcimap *map;
int map64 = 0;
int reg = PCIR_MAPS;
for (i = 0; i < maxmaps; i++) {
int reg = PCIR_MAPS + i*4;
u_int32_t base;
u_int32_t ln2range;
base = pci_cfgread(cfg, reg, 4);
ln2range = pci_maprange(base);
if (base == 0 || ln2range == 0 || base == 0xffffffff)
continue; /* skip invalid entry */
else {
j++;
if (ln2range > 32) {
i++;
j++;
}
}
}
map = malloc(j * sizeof (pcimap), M_DEVBUF, M_WAITOK);
if (map != NULL) {
bzero(map, sizeof(pcimap) * j);
cfg->nummaps = j;
for (i = 0, j = 0; i < maxmaps; i++, reg += 4) {
u_int32_t base;
u_int32_t testval;
base = pci_cfgread(cfg, reg, 4);
if (map64 == 0) {
if (base == 0 || base == 0xffffffff)
continue; /* skip invalid entry */
pci_cfgwrite(cfg, reg, 0xffffffff, 4);
testval = pci_cfgread(cfg, reg, 4);
pci_cfgwrite(cfg, reg, base, 4);
map[j].reg = reg;
map[j].base = pci_mapbase(base);
map[j].type = pci_maptype(base);
map[j].ln2size = pci_mapsize(testval);
map[j].ln2range = pci_maprange(testval);
map64 = map[j].ln2range == 64;
} else {
/* only fill in base, other fields are 0 */
map[j].base = base;
map64 = 0;
}
#ifdef __alpha__
/*
* XXX: encode hose number in the base addr,
* This will go away once the bus_space functions
* can deal with multiple hoses
*/
if(cfg->hose){
if(map[j].base & 0x80000000){
printf("base addr = 0x%x\n", map[j].base);
printf("hacked addr = 0x%x\n",
map[j].base | (cfg->hose << 31));
panic("hose encoding hack would clobber base addr");
}
if(cfg->hose > 1 )
panic("only one hose supported!");
map[j].base |= (cfg->hose << 31);
}
#endif
j++;
}
}
return (map);
}
/* adjust some values from PCI 1.0 devices to match 2.0 standards ... */
static void
pci_fixancient(pcicfgregs *cfg)
{
if (cfg->hdrtype != 0)
return;
/* PCI to PCI bridges use header type 1 */
if (cfg->baseclass == PCIC_BRIDGE && cfg->subclass == PCIS_BRIDGE_PCI)
cfg->hdrtype = 1;
}
/* read config data specific to header type 1 device (PCI to PCI bridge) */
static void *
pci_readppb(pcicfgregs *cfg)
{
pcih1cfgregs *p;
p = malloc(sizeof (pcih1cfgregs), M_DEVBUF, M_WAITOK);
if (p == NULL)
return (NULL);
bzero(p, sizeof *p);
p->secstat = pci_cfgread(cfg, PCIR_SECSTAT_1, 2);
p->bridgectl = pci_cfgread(cfg, PCIR_BRIDGECTL_1, 2);
p->seclat = pci_cfgread(cfg, PCIR_SECLAT_1, 1);
p->iobase = PCI_PPBIOBASE (pci_cfgread(cfg, PCIR_IOBASEH_1, 2),
pci_cfgread(cfg, PCIR_IOBASEL_1, 1));
p->iolimit = PCI_PPBIOLIMIT (pci_cfgread(cfg, PCIR_IOLIMITH_1, 2),
pci_cfgread(cfg, PCIR_IOLIMITL_1, 1));
p->membase = PCI_PPBMEMBASE (0,
pci_cfgread(cfg, PCIR_MEMBASE_1, 2));
p->memlimit = PCI_PPBMEMLIMIT (0,
pci_cfgread(cfg, PCIR_MEMLIMIT_1, 2));
p->pmembase = PCI_PPBMEMBASE (
(pci_addr_t)pci_cfgread(cfg, PCIR_PMBASEH_1, 4),
pci_cfgread(cfg, PCIR_PMBASEL_1, 2));
p->pmemlimit = PCI_PPBMEMLIMIT (
(pci_addr_t)pci_cfgread(cfg, PCIR_PMLIMITH_1, 4),
pci_cfgread(cfg, PCIR_PMLIMITL_1, 2));
return (p);
}
/* read config data specific to header type 2 device (PCI to CardBus bridge) */
static void *
pci_readpcb(pcicfgregs *cfg)
{
pcih2cfgregs *p;
p = malloc(sizeof (pcih2cfgregs), M_DEVBUF, M_WAITOK);
if (p == NULL)
return (NULL);
bzero(p, sizeof *p);
p->secstat = pci_cfgread(cfg, PCIR_SECSTAT_2, 2);
p->bridgectl = pci_cfgread(cfg, PCIR_BRIDGECTL_2, 2);
p->seclat = pci_cfgread(cfg, PCIR_SECLAT_2, 1);
p->membase0 = pci_cfgread(cfg, PCIR_MEMBASE0_2, 4);
p->memlimit0 = pci_cfgread(cfg, PCIR_MEMLIMIT0_2, 4);
p->membase1 = pci_cfgread(cfg, PCIR_MEMBASE1_2, 4);
p->memlimit1 = pci_cfgread(cfg, PCIR_MEMLIMIT1_2, 4);
p->iobase0 = pci_cfgread(cfg, PCIR_IOBASE0_2, 4);
p->iolimit0 = pci_cfgread(cfg, PCIR_IOLIMIT0_2, 4);
p->iobase1 = pci_cfgread(cfg, PCIR_IOBASE1_2, 4);
p->iolimit1 = pci_cfgread(cfg, PCIR_IOLIMIT1_2, 4);
p->pccardif = pci_cfgread(cfg, PCIR_PCCARDIF_2, 4);
return p;
}
/* extract header type specific config data */
static void
pci_hdrtypedata(pcicfgregs *cfg)
{
switch (cfg->hdrtype) {
case 0:
cfg->subvendor = pci_cfgread(cfg, PCIR_SUBVEND_0, 2);
cfg->subdevice = pci_cfgread(cfg, PCIR_SUBDEV_0, 2);
cfg->map = pci_readmaps(cfg, PCI_MAXMAPS_0);
break;
case 1:
cfg->subvendor = pci_cfgread(cfg, PCIR_SUBVEND_1, 2);
cfg->subdevice = pci_cfgread(cfg, PCIR_SUBDEV_1, 2);
cfg->secondarybus = pci_cfgread(cfg, PCIR_SECBUS_1, 1);
cfg->subordinatebus = pci_cfgread(cfg, PCIR_SUBBUS_1, 1);
cfg->map = pci_readmaps(cfg, PCI_MAXMAPS_1);
cfg->hdrspec = pci_readppb(cfg);
break;
case 2:
cfg->subvendor = pci_cfgread(cfg, PCIR_SUBVEND_2, 2);
cfg->subdevice = pci_cfgread(cfg, PCIR_SUBDEV_2, 2);
cfg->secondarybus = pci_cfgread(cfg, PCIR_SECBUS_2, 1);
cfg->subordinatebus = pci_cfgread(cfg, PCIR_SUBBUS_2, 1);
cfg->map = pci_readmaps(cfg, PCI_MAXMAPS_2);
cfg->hdrspec = pci_readpcb(cfg);
break;
}
}
/* read configuration header into pcicfgrect structure */
static struct pci_devinfo *
pci_readcfg(pcicfgregs *probe)
{
pcicfgregs *cfg = NULL;
struct pci_devinfo *devlist_entry;
struct devlist *devlist_head;
devlist_head = &pci_devq;
devlist_entry = NULL;
if (pci_cfgread(probe, PCIR_DEVVENDOR, 4) != -1) {
devlist_entry = malloc(sizeof(struct pci_devinfo),
M_DEVBUF, M_WAITOK);
if (devlist_entry == NULL)
return (NULL);
bzero(devlist_entry, sizeof *devlist_entry);
cfg = &devlist_entry->cfg;
cfg->hose = probe->hose;
cfg->bus = probe->bus;
cfg->slot = probe->slot;
cfg->func = probe->func;
cfg->vendor = pci_cfgread(cfg, PCIR_VENDOR, 2);
cfg->device = pci_cfgread(cfg, PCIR_DEVICE, 2);
cfg->cmdreg = pci_cfgread(cfg, PCIR_COMMAND, 2);
cfg->statreg = pci_cfgread(cfg, PCIR_STATUS, 2);
cfg->baseclass = pci_cfgread(cfg, PCIR_CLASS, 1);
cfg->subclass = pci_cfgread(cfg, PCIR_SUBCLASS, 1);
cfg->progif = pci_cfgread(cfg, PCIR_PROGIF, 1);
cfg->revid = pci_cfgread(cfg, PCIR_REVID, 1);
cfg->hdrtype = pci_cfgread(cfg, PCIR_HEADERTYPE, 1);
cfg->cachelnsz = pci_cfgread(cfg, PCIR_CACHELNSZ, 1);
cfg->lattimer = pci_cfgread(cfg, PCIR_LATTIMER, 1);
cfg->intpin = pci_cfgread(cfg, PCIR_INTPIN, 1);
cfg->intline = pci_cfgread(cfg, PCIR_INTLINE, 1);
#ifdef __alpha__
alpha_platform_assign_pciintr(cfg);
#endif
#ifdef APIC_IO
if (cfg->intpin != 0) {
int airq;
airq = pci_apic_irq(cfg->bus, cfg->slot, cfg->intpin);
if (airq >= 0) {
/* PCI specific entry found in MP table */
if (airq != cfg->intline) {
undirect_pci_irq(cfg->intline);
cfg->intline = airq;
}
} else {
/*
* PCI interrupts might be redirected to the
* ISA bus according to some MP tables. Use the
* same methods as used by the ISA devices
* devices to find the proper IOAPIC int pin.
*/
airq = isa_apic_irq(cfg->intline);
if ((airq >= 0) && (airq != cfg->intline)) {
/* XXX: undirect_pci_irq() ? */
undirect_isa_irq(cfg->intline);
cfg->intline = airq;
}
}
}
#endif /* APIC_IO */
cfg->mingnt = pci_cfgread(cfg, PCIR_MINGNT, 1);
cfg->maxlat = pci_cfgread(cfg, PCIR_MAXLAT, 1);
cfg->mfdev = (cfg->hdrtype & PCIM_MFDEV) != 0;
cfg->hdrtype &= ~PCIM_MFDEV;
pci_fixancient(cfg);
pci_hdrtypedata(cfg);
STAILQ_INSERT_TAIL(devlist_head, devlist_entry, pci_links);
devlist_entry->conf.pc_sel.pc_bus = cfg->bus;
devlist_entry->conf.pc_sel.pc_dev = cfg->slot;
devlist_entry->conf.pc_sel.pc_func = cfg->func;
devlist_entry->conf.pc_hdr = cfg->hdrtype;
devlist_entry->conf.pc_subvendor = cfg->subvendor;
devlist_entry->conf.pc_subdevice = cfg->subdevice;
devlist_entry->conf.pc_vendor = cfg->vendor;
devlist_entry->conf.pc_device = cfg->device;
devlist_entry->conf.pc_class = cfg->baseclass;
devlist_entry->conf.pc_subclass = cfg->subclass;
devlist_entry->conf.pc_progif = cfg->progif;
devlist_entry->conf.pc_revid = cfg->revid;
pci_numdevs++;
pci_generation++;
}
return (devlist_entry);
}
#if 0
/* free pcicfgregs structure and all depending data structures */
static int
pci_freecfg(struct pci_devinfo *dinfo)
{
struct devlist *devlist_head;
devlist_head = &pci_devq;
if (dinfo->cfg.hdrspec != NULL)
free(dinfo->cfg.hdrspec, M_DEVBUF);
if (dinfo->cfg.map != NULL)
free(dinfo->cfg.map, M_DEVBUF);
/* XXX this hasn't been tested */
STAILQ_REMOVE(devlist_head, dinfo, pci_devinfo, pci_links);
free(dinfo, M_DEVBUF);
/* increment the generation count */
pci_generation++;
/* we're losing one device */
pci_numdevs--;
return (0);
}
#endif
/*
* This is the user interface to PCI configuration space.
*/
static int
pci_open(dev_t dev, int oflags, int devtype, struct proc *p)
{
if ((oflags & FWRITE) && securelevel > 0) {
return EPERM;
}
return 0;
}
static int
pci_close(dev_t dev, int flag, int devtype, struct proc *p)
{
return 0;
}
/*
* Match a single pci_conf structure against an array of pci_match_conf
* structures. The first argument, 'matches', is an array of num_matches
* pci_match_conf structures. match_buf is a pointer to the pci_conf
* structure that will be compared to every entry in the matches array.
* This function returns 1 on failure, 0 on success.
*/
static int
pci_conf_match(struct pci_match_conf *matches, int num_matches,
struct pci_conf *match_buf)
{
int i;
if ((matches == NULL) || (match_buf == NULL) || (num_matches <= 0))
return(1);
for (i = 0; i < num_matches; i++) {
/*
* I'm not sure why someone would do this...but...
*/
if (matches[i].flags == PCI_GETCONF_NO_MATCH)
continue;
/*
* Look at each of the match flags. If it's set, do the
* comparison. If the comparison fails, we don't have a
* match, go on to the next item if there is one.
*/
if (((matches[i].flags & PCI_GETCONF_MATCH_BUS) != 0)
&& (match_buf->pc_sel.pc_bus != matches[i].pc_sel.pc_bus))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_DEV) != 0)
&& (match_buf->pc_sel.pc_dev != matches[i].pc_sel.pc_dev))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_FUNC) != 0)
&& (match_buf->pc_sel.pc_func != matches[i].pc_sel.pc_func))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_VENDOR) != 0)
&& (match_buf->pc_vendor != matches[i].pc_vendor))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_DEVICE) != 0)
&& (match_buf->pc_device != matches[i].pc_device))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_CLASS) != 0)
&& (match_buf->pc_class != matches[i].pc_class))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_UNIT) != 0)
&& (match_buf->pd_unit != matches[i].pd_unit))
continue;
if (((matches[i].flags & PCI_GETCONF_MATCH_NAME) != 0)
&& (strncmp(matches[i].pd_name, match_buf->pd_name,
sizeof(match_buf->pd_name)) != 0))
continue;
return(0);
}
return(1);
}
/*
* Locate the parent of a PCI device by scanning the PCI devlist
* and return the entry for the parent.
* For devices on PCI Bus 0 (the host bus), this is the PCI Host.
* For devices on secondary PCI busses, this is that bus' PCI-PCI Bridge.
*/
pcicfgregs *
pci_devlist_get_parent(pcicfgregs *cfg)
{
struct devlist *devlist_head;
struct pci_devinfo *dinfo;
pcicfgregs *bridge_cfg;
int i;
dinfo = STAILQ_FIRST(devlist_head = &pci_devq);
/* If the device is on PCI bus 0, look for the host */
if (cfg->bus == 0) {
for (i = 0; (dinfo != NULL) && (i < pci_numdevs);
dinfo = STAILQ_NEXT(dinfo, pci_links), i++) {
bridge_cfg = &dinfo->cfg;
if (bridge_cfg->baseclass == PCIC_BRIDGE
&& bridge_cfg->subclass == PCIS_BRIDGE_HOST
&& bridge_cfg->bus == cfg->bus) {
return bridge_cfg;
}
}
}
/* If the device is not on PCI bus 0, look for the PCI-PCI bridge */
if (cfg->bus > 0) {
for (i = 0; (dinfo != NULL) && (i < pci_numdevs);
dinfo = STAILQ_NEXT(dinfo, pci_links), i++) {
bridge_cfg = &dinfo->cfg;
if (bridge_cfg->baseclass == PCIC_BRIDGE
&& bridge_cfg->subclass == PCIS_BRIDGE_PCI
&& bridge_cfg->secondarybus == cfg->bus) {
return bridge_cfg;
}
}
}
return NULL;
}
static int
pci_ioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p)
{
struct pci_io *io;
const char *name;
int error;
if (!(flag & FWRITE))
return EPERM;
switch(cmd) {
case PCIOCGETCONF:
{
struct pci_devinfo *dinfo;
struct pci_conf_io *cio;
struct devlist *devlist_head;
struct pci_match_conf *pattern_buf;
int num_patterns;
size_t iolen;
int ionum, i;
cio = (struct pci_conf_io *)data;
num_patterns = 0;
dinfo = NULL;
/*
* Hopefully the user won't pass in a null pointer, but it
* can't hurt to check.
*/
if (cio == NULL) {
error = EINVAL;
break;
}
/*
* If the user specified an offset into the device list,
* but the list has changed since they last called this
* ioctl, tell them that the list has changed. They will
* have to get the list from the beginning.
*/
if ((cio->offset != 0)
&& (cio->generation != pci_generation)){
cio->num_matches = 0;
cio->status = PCI_GETCONF_LIST_CHANGED;
error = 0;
break;
}
/*
* Check to see whether the user has asked for an offset
* past the end of our list.
*/
if (cio->offset >= pci_numdevs) {
cio->num_matches = 0;
cio->status = PCI_GETCONF_LAST_DEVICE;
error = 0;
break;
}
/* get the head of the device queue */
devlist_head = &pci_devq;
/*
* Determine how much room we have for pci_conf structures.
* Round the user's buffer size down to the nearest
* multiple of sizeof(struct pci_conf) in case the user
* didn't specify a multiple of that size.
*/
iolen = min(cio->match_buf_len -
(cio->match_buf_len % sizeof(struct pci_conf)),
pci_numdevs * sizeof(struct pci_conf));
/*
* Since we know that iolen is a multiple of the size of
* the pciconf union, it's okay to do this.
*/
ionum = iolen / sizeof(struct pci_conf);
/*
* If this test is true, the user wants the pci_conf
* structures returned to match the supplied entries.
*/
if ((cio->num_patterns > 0)
&& (cio->pat_buf_len > 0)) {
/*
* pat_buf_len needs to be:
* num_patterns * sizeof(struct pci_match_conf)
* While it is certainly possible the user just
* allocated a large buffer, but set the number of
* matches correctly, it is far more likely that
* their kernel doesn't match the userland utility
* they're using. It's also possible that the user
* forgot to initialize some variables. Yes, this
* may be overly picky, but I hazard to guess that
* it's far more likely to just catch folks that
* updated their kernel but not their userland.
*/
if ((cio->num_patterns *
sizeof(struct pci_match_conf)) != cio->pat_buf_len){
/* The user made a mistake, return an error*/
cio->status = PCI_GETCONF_ERROR;
printf("pci_ioctl: pat_buf_len %d != "
"num_patterns (%d) * sizeof(struct "
"pci_match_conf) (%d)\npci_ioctl: "
"pat_buf_len should be = %d\n",
cio->pat_buf_len, cio->num_patterns,
(int)sizeof(struct pci_match_conf),
(int)sizeof(struct pci_match_conf) *
cio->num_patterns);
printf("pci_ioctl: do your headers match your "
"kernel?\n");
cio->num_matches = 0;
error = EINVAL;
break;
}
/*
* Check the user's buffer to make sure it's readable.
*/
if ((error = useracc((caddr_t)cio->patterns,
cio->pat_buf_len, B_READ)) != 1){
printf("pci_ioctl: pattern buffer %p, "
"length %u isn't user accessible for"
" READ\n", cio->patterns,
cio->pat_buf_len);
error = EACCES;
break;
}
/*
* Allocate a buffer to hold the patterns.
*/
pattern_buf = malloc(cio->pat_buf_len, M_TEMP,
M_WAITOK);
error = copyin(cio->patterns, pattern_buf,
cio->pat_buf_len);
if (error != 0)
break;
num_patterns = cio->num_patterns;
} else if ((cio->num_patterns > 0)
|| (cio->pat_buf_len > 0)) {
/*
* The user made a mistake, spit out an error.
*/
cio->status = PCI_GETCONF_ERROR;
cio->num_matches = 0;
printf("pci_ioctl: invalid GETCONF arguments\n");
error = EINVAL;
break;
} else
pattern_buf = NULL;
/*
* Make sure we can write to the match buffer.
*/
if ((error = useracc((caddr_t)cio->matches, cio->match_buf_len,
B_WRITE)) != 1) {
printf("pci_ioctl: match buffer %p, length %u "
"isn't user accessible for WRITE\n",
cio->matches, cio->match_buf_len);
error = EACCES;
break;
}
/*
* Go through the list of devices and copy out the devices
* that match the user's criteria.
*/
for (cio->num_matches = 0, error = 0, i = 0,
dinfo = STAILQ_FIRST(devlist_head);
(dinfo != NULL) && (cio->num_matches < ionum)
&& (error == 0) && (i < pci_numdevs);
dinfo = STAILQ_NEXT(dinfo, pci_links), i++) {
if (i < cio->offset)
continue;
/* Populate pd_name and pd_unit */
name = NULL;
if (dinfo->cfg.dev && dinfo->conf.pd_name[0] == '\0')
name = device_get_name(dinfo->cfg.dev);
if (name) {
strncpy(dinfo->conf.pd_name, name,
sizeof(dinfo->conf.pd_name));
dinfo->conf.pd_name[PCI_MAXNAMELEN] = 0;
dinfo->conf.pd_unit =
device_get_unit(dinfo->cfg.dev);
}
if ((pattern_buf == NULL) ||
(pci_conf_match(pattern_buf, num_patterns,
&dinfo->conf) == 0)) {
/*
* If we've filled up the user's buffer,
* break out at this point. Since we've
* got a match here, we'll pick right back
* up at the matching entry. We can also
* tell the user that there are more matches
* left.
*/
if (cio->num_matches >= ionum)
break;
error = copyout(&dinfo->conf,
&cio->matches[cio->num_matches],
sizeof(struct pci_conf));
cio->num_matches++;
}
}
/*
* Set the pointer into the list, so if the user is getting
* n records at a time, where n < pci_numdevs,
*/
cio->offset = i;
/*
* Set the generation, the user will need this if they make
* another ioctl call with offset != 0.
*/
cio->generation = pci_generation;
/*
* If this is the last device, inform the user so he won't
* bother asking for more devices. If dinfo isn't NULL, we
* know that there are more matches in the list because of
* the way the traversal is done.
*/
if (dinfo == NULL)
cio->status = PCI_GETCONF_LAST_DEVICE;
else
cio->status = PCI_GETCONF_MORE_DEVS;
if (pattern_buf != NULL)
free(pattern_buf, M_TEMP);
break;
}
case PCIOCREAD:
io = (struct pci_io *)data;
switch(io->pi_width) {
pcicfgregs probe;
case 4:
case 2:
case 1:
probe.bus = io->pi_sel.pc_bus;
probe.slot = io->pi_sel.pc_dev;
probe.func = io->pi_sel.pc_func;
io->pi_data = pci_cfgread(&probe,
io->pi_reg, io->pi_width);
error = 0;
break;
default:
error = ENODEV;
break;
}
break;
case PCIOCWRITE:
io = (struct pci_io *)data;
switch(io->pi_width) {
pcicfgregs probe;
case 4:
case 2:
case 1:
probe.bus = io->pi_sel.pc_bus;
probe.slot = io->pi_sel.pc_dev;
probe.func = io->pi_sel.pc_func;
pci_cfgwrite(&probe,
io->pi_reg, io->pi_data, io->pi_width);
error = 0;
break;
default:
error = ENODEV;
break;
}
break;
default:
error = ENOTTY;
break;
}
return (error);
}
#define PCI_CDEV 78
static struct cdevsw pcicdev = {
/* open */ pci_open,
/* close */ pci_close,
/* read */ noread,
/* write */ nowrite,
/* ioctl */ pci_ioctl,
/* stop */ nostop,
/* reset */ noreset,
/* devtotty */ nodevtotty,
/* poll */ nopoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ "pci",
/* parms */ noparms,
/* maj */ PCI_CDEV,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ 0,
/* maxio */ 0,
/* bmaj */ -1
};
#ifdef DEVFS
static void *pci_devfs_token;
#endif
static void
pci_cdevinit(void *dummy)
{
cdevsw_add(&pcicdev);
#ifdef DEVFS
pci_devfs_token = devfs_add_devswf(&pcicdev, 0, DV_CHR,
UID_ROOT, GID_WHEEL, 0644, "pci");
#endif
}
SYSINIT(pcidev, SI_SUB_DRIVERS, SI_ORDER_MIDDLE+PCI_CDEV, pci_cdevinit, NULL);
#include "pci_if.h"
/*
* A simple driver to wrap the old pci driver mechanism for back-compat.
*/
static int
pci_compat_probe(device_t dev)
{
struct pci_device *dvp;
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
const char *name;
int error;
dinfo = device_get_ivars(dev);
cfg = &dinfo->cfg;
dvp = device_get_driver(dev)->priv;
/*
* Do the wrapped probe.
*/
error = ENXIO;
if (dvp && dvp->pd_probe) {
name = dvp->pd_probe(cfg, (cfg->device << 16) + cfg->vendor);
if (name) {
device_set_desc_copy(dev, name);
error = 0;
}
}
return error;
}
static int
pci_compat_attach(device_t dev)
{
struct pci_device *dvp;
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
int unit;
dinfo = device_get_ivars(dev);
cfg = &dinfo->cfg;
dvp = device_get_driver(dev)->priv;
unit = device_get_unit(dev);
if (unit > *dvp->pd_count)
*dvp->pd_count = unit;
if (dvp->pd_attach)
dvp->pd_attach(cfg, unit);
return 0;
}
static device_method_t pci_compat_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, pci_compat_probe),
DEVMETHOD(device_attach, pci_compat_attach),
{ 0, 0 }
};
static devclass_t pci_devclass;
/*
* Create a new style driver around each old pci driver.
*/
int
compat_pci_handler(module_t mod, int type, void *data)
{
struct pci_device *dvp = (struct pci_device *)data;
driver_t *driver;
switch (type) {
case MOD_LOAD:
driver = malloc(sizeof(driver_t), M_DEVBUF, M_NOWAIT);
if (!driver)
return ENOMEM;
bzero(driver, sizeof(driver_t));
driver->name = dvp->pd_name;
driver->methods = pci_compat_methods;
driver->softc = sizeof(struct pci_devinfo *);
driver->priv = dvp;
devclass_add_driver(pci_devclass, driver);
break;
case MOD_UNLOAD:
printf("%s: module unload not supported!\n", dvp->pd_name);
return EOPNOTSUPP;
default:
break;
}
return 0;
}
/*
* New style pci driver. Parent device is either a pci-host-bridge or a
* pci-pci-bridge. Both kinds are represented by instances of pcib.
*/
static void
pci_print_verbose(struct pci_devinfo *dinfo)
{
if (bootverbose) {
int i;
pcicfgregs *cfg = &dinfo->cfg;
printf("found->\tvendor=0x%04x, dev=0x%04x, revid=0x%02x\n",
cfg->vendor, cfg->device, cfg->revid);
printf("\tclass=%02x-%02x-%02x, hdrtype=0x%02x, mfdev=%d\n",
cfg->baseclass, cfg->subclass, cfg->progif,
cfg->hdrtype, cfg->mfdev);
printf("\tsubordinatebus=%x \tsecondarybus=%x\n",
cfg->subordinatebus, cfg->secondarybus);
#ifdef PCI_DEBUG
printf("\tcmdreg=0x%04x, statreg=0x%04x, cachelnsz=%d (dwords)\n",
cfg->cmdreg, cfg->statreg, cfg->cachelnsz);
printf("\tlattimer=0x%02x (%d ns), mingnt=0x%02x (%d ns), maxlat=0x%02x (%d ns)\n",
cfg->lattimer, cfg->lattimer * 30,
cfg->mingnt, cfg->mingnt * 250, cfg->maxlat, cfg->maxlat * 250);
#endif /* PCI_DEBUG */
if (cfg->intpin > 0)
printf("\tintpin=%c, irq=%d\n", cfg->intpin +'a' -1, cfg->intline);
for (i = 0; i < cfg->nummaps; i++) {
pcimap *m = &cfg->map[i];
printf("\tmap[%d]: type %x, range %2d, base %08x, size %2d\n",
i, m->type, m->ln2range, m->base, m->ln2size);
}
}
}
static int
pci_add_children(device_t dev, int busno)
{
pcicfgregs probe;
int bushigh = busno;
#ifdef SIMOS
#undef PCI_SLOTMAX
#define PCI_SLOTMAX 0
#endif
bzero(&probe, sizeof probe);
#ifdef __alpha__
probe.hose = pcib_get_hose(dev);
#endif
#ifdef __i386__
probe.hose = 0;
#endif
probe.bus = busno;
for (probe.slot = 0; probe.slot <= PCI_SLOTMAX; probe.slot++) {
int pcifunchigh = 0;
for (probe.func = 0; probe.func <= pcifunchigh; probe.func++) {
struct pci_devinfo *dinfo = pci_readcfg(&probe);
if (dinfo != NULL) {
if (dinfo->cfg.mfdev)
pcifunchigh = 7;
pci_print_verbose(dinfo);
dinfo->cfg.dev =
device_add_child(dev, NULL, -1, dinfo);
if (bushigh < dinfo->cfg.subordinatebus)
bushigh = dinfo->cfg.subordinatebus;
if (bushigh < dinfo->cfg.secondarybus)
bushigh = dinfo->cfg.secondarybus;
}
}
}
return bushigh;
}
static int
pci_new_probe(device_t dev)
{
device_set_desc(dev, "PCI bus");
pci_add_children(dev, device_get_unit(dev));
return 0;
}
static void
pci_print_child(device_t dev, device_t child)
{
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
dinfo = device_get_ivars(child);
cfg = &dinfo->cfg;
if (cfg->intpin > 0 && cfg->intline != 255)
printf(" irq %d", cfg->intline);
printf(" at device %d.%d", pci_get_slot(child), pci_get_function(child));
printf(" on %s%d", device_get_name(dev), device_get_unit(dev));
}
static void
pci_probe_nomatch(device_t dev, device_t child)
{
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
dinfo = device_get_ivars(child);
cfg = &dinfo->cfg;
device_printf(dev, "unknown card %c%c%c%04x (vendor=0x%04x, dev=0x%04x) at %d.%d",
PCI_MFCTR_CHAR0(cfg->vendor),
PCI_MFCTR_CHAR1(cfg->vendor),
PCI_MFCTR_CHAR2(cfg->vendor),
cfg->device,
cfg->vendor,
cfg->device,
pci_get_slot(child),
pci_get_function(child));
if (cfg->intpin > 0 && cfg->intline != 255) {
printf(" irq %d", cfg->intline);
}
printf("\n");
return;
}
static int
pci_read_ivar(device_t dev, device_t child, int which, u_long *result)
{
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
dinfo = device_get_ivars(child);
cfg = &dinfo->cfg;
switch (which) {
case PCI_IVAR_SUBVENDOR:
*result = cfg->subvendor;
break;
case PCI_IVAR_SUBDEVICE:
*result = cfg->subdevice;
break;
case PCI_IVAR_VENDOR:
*result = cfg->vendor;
break;
case PCI_IVAR_DEVICE:
*result = cfg->device;
break;
case PCI_IVAR_DEVID:
*result = (cfg->device << 16) | cfg->vendor;
break;
case PCI_IVAR_CLASS:
*result = cfg->baseclass;
break;
case PCI_IVAR_SUBCLASS:
*result = cfg->subclass;
break;
case PCI_IVAR_PROGIF:
*result = cfg->progif;
break;
case PCI_IVAR_REVID:
*result = cfg->revid;
break;
case PCI_IVAR_INTPIN:
*result = cfg->intpin;
break;
case PCI_IVAR_IRQ:
*result = cfg->intline;
break;
case PCI_IVAR_BUS:
*result = cfg->bus;
break;
case PCI_IVAR_SLOT:
*result = cfg->slot;
break;
case PCI_IVAR_FUNCTION:
*result = cfg->func;
break;
case PCI_IVAR_SECONDARYBUS:
*result = cfg->secondarybus;
break;
case PCI_IVAR_SUBORDINATEBUS:
*result = cfg->subordinatebus;
break;
case PCI_IVAR_HOSE:
/*
* Pass up to parent bridge.
*/
*result = pcib_get_hose(dev);
break;
default:
return ENOENT;
}
return 0;
}
static int
pci_write_ivar(device_t dev, device_t child, int which, uintptr_t value)
{
struct pci_devinfo *dinfo;
pcicfgregs *cfg;
dinfo = device_get_ivars(child);
cfg = &dinfo->cfg;
switch (which) {
case PCI_IVAR_SUBVENDOR:
case PCI_IVAR_SUBDEVICE:
case PCI_IVAR_VENDOR:
case PCI_IVAR_DEVICE:
case PCI_IVAR_DEVID:
case PCI_IVAR_CLASS:
case PCI_IVAR_SUBCLASS:
case PCI_IVAR_PROGIF:
case PCI_IVAR_REVID:
case PCI_IVAR_INTPIN:
case PCI_IVAR_IRQ:
case PCI_IVAR_BUS:
case PCI_IVAR_SLOT:
case PCI_IVAR_FUNCTION:
return EINVAL; /* disallow for now */
case PCI_IVAR_SECONDARYBUS:
cfg->secondarybus = value;
break;
case PCI_IVAR_SUBORDINATEBUS:
cfg->subordinatebus = value;
break;
default:
return ENOENT;
}
return 0;
}
static int
pci_mapno(pcicfgregs *cfg, int reg)
{
int i, nummaps;
pcimap *map;
nummaps = cfg->nummaps;
map = cfg->map;
for (i = 0; i < nummaps; i++)
if (map[i].reg == reg)
return (i);
return (-1);
}
static int
pci_porten(pcicfgregs *cfg)
{
return ((cfg->cmdreg & PCIM_CMD_PORTEN) != 0);
}
static int
pci_isportmap(pcicfgregs *cfg, int map)
{
return ((unsigned)map < cfg->nummaps
&& (cfg->map[map].type & PCI_MAPPORT) != 0);
}
static int
pci_memen(pcicfgregs *cfg)
{
return ((cfg->cmdreg & PCIM_CMD_MEMEN) != 0);
}
static int
pci_ismemmap(pcicfgregs *cfg, int map)
{
return ((unsigned)map < cfg->nummaps
&& (cfg->map[map].type & PCI_MAPMEM) != 0);
}
static struct resource *
pci_alloc_resource(device_t dev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
int isdefault;
struct pci_devinfo *dinfo = device_get_ivars(child);
pcicfgregs *cfg = &dinfo->cfg;
struct resource *rv, **rvp = 0;
int map;
isdefault = (device_get_parent(child) == dev
&& start == 0UL && end == ~0UL);
switch (type) {
case SYS_RES_IRQ:
if (*rid != 0)
return 0;
if (isdefault && cfg->intline != 255) {
start = cfg->intline;
end = cfg->intline;
count = 1;
}
break;
case SYS_RES_DRQ: /* passthru for child isa */
break;
#ifdef __alpha__
case SYS_RES_DENSE:
case SYS_RES_BWX:
#endif
case SYS_RES_MEMORY:
if (isdefault) {
map = pci_mapno(cfg, *rid);
if (pci_memen(cfg) && pci_ismemmap(cfg, map)) {
start = cfg->map[map].base;
count = 1 << cfg->map[map].ln2size;
end = start + count;
rvp = &cfg->map[map].res;
} else
return 0;
}
break;
case SYS_RES_IOPORT:
if (isdefault) {
map = pci_mapno(cfg, *rid);
if (pci_porten(cfg) && pci_isportmap(cfg, map)) {
start = cfg->map[map].base;
count = 1 << cfg->map[map].ln2size;
end = start + count;
rvp = &cfg->map[map].res;
} else
return 0;
}
break;
default:
return 0;
}
rv = BUS_ALLOC_RESOURCE(device_get_parent(dev), child,
type, rid, start, end, count, flags);
if (rvp)
*rvp = rv;
return rv;
}
static int
pci_release_resource(device_t dev, device_t child, int type, int rid,
struct resource *r)
{
int rv;
struct pci_devinfo *dinfo = device_get_ivars(child);
pcicfgregs *cfg = &dinfo->cfg;
int map = 0;
switch (type) {
case SYS_RES_IRQ:
if (rid != 0)
return EINVAL;
break;
case SYS_RES_DRQ: /* passthru for child isa */
break;
#ifdef __alpha__
case SYS_RES_DENSE:
case SYS_RES_BWX:
#endif
case SYS_RES_MEMORY:
case SYS_RES_IOPORT:
/*
* Only check the map registers if this is a direct
* descendant.
*/
if (device_get_parent(child) == dev)
map = pci_mapno(cfg, rid);
else
map = -1;
break;
default:
return (ENOENT);
}
rv = BUS_RELEASE_RESOURCE(device_get_parent(dev), child, type, rid, r);
if (rv == 0) {
switch (type) {
case SYS_RES_IRQ:
cfg->irqres = 0;
break;
case SYS_RES_DRQ: /* passthru for child isa */
break;
#ifdef __alpha__
case SYS_RES_DENSE:
case SYS_RES_BWX:
#endif
case SYS_RES_MEMORY:
case SYS_RES_IOPORT:
if (map != -1)
cfg->map[map].res = 0;
break;
default:
return ENOENT;
}
}
return rv;
}
static u_int32_t
pci_read_config_method(device_t dev, device_t child, int reg, int width)
{
struct pci_devinfo *dinfo = device_get_ivars(child);
pcicfgregs *cfg = &dinfo->cfg;
return pci_cfgread(cfg, reg, width);
}
static void
pci_write_config_method(device_t dev, device_t child, int reg,
u_int32_t val, int width)
{
struct pci_devinfo *dinfo = device_get_ivars(child);
pcicfgregs *cfg = &dinfo->cfg;
pci_cfgwrite(cfg, reg, val, width);
}
static int
pci_modevent(module_t mod, int what, void *arg)
{
switch (what) {
case MOD_LOAD:
STAILQ_INIT(&pci_devq);
break;
case MOD_UNLOAD:
break;
}
return 0;
}
static device_method_t pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, pci_new_probe),
DEVMETHOD(device_attach, bus_generic_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* Bus interface */
DEVMETHOD(bus_print_child, pci_print_child),
DEVMETHOD(bus_probe_nomatch, pci_probe_nomatch),
DEVMETHOD(bus_read_ivar, pci_read_ivar),
DEVMETHOD(bus_write_ivar, pci_write_ivar),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
DEVMETHOD(bus_alloc_resource, pci_alloc_resource),
DEVMETHOD(bus_release_resource, pci_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
/* PCI interface */
DEVMETHOD(pci_read_config, pci_read_config_method),
DEVMETHOD(pci_write_config, pci_write_config_method),
{ 0, 0 }
};
static driver_t pci_driver = {
"pci",
pci_methods,
1, /* no softc */
};
DRIVER_MODULE(pci, pcib, pci_driver, pci_devclass, pci_modevent, 0);