d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
38618bf430
freebsd-skq/sys/cam/cam_xpt.h
Kenneth D. Merry a9934668aa Add asynchronous command support to the pass(4) driver, and the new 
camdd(8) utility.

CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and
completed CCBs may be retrieved via the CAMIOGET ioctl.  User
processes can use poll(2) or kevent(2) to get notification when
I/O has completed.

While the existing CAMIOCOMMAND blocking ioctl interface only
supports user virtual data pointers in a CCB (generally only
one per CCB), the new CAMIOQUEUE ioctl supports user virtual and
physical address pointers, as well as user virtual and physical
scatter/gather lists.  This allows user applications to have more
flexibility in their data handling operations.

Kernel memory for data transferred via the queued interface is
allocated from the zone allocator in MAXPHYS sized chunks, and user
data is copied in and out.  This is likely faster than the
vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in
configurations with many processors (there are more TLB shootdowns
caused by the mapping/unmapping operation) but may not be as fast
as running with unmapped I/O.

The new memory handling model for user requests also allows
applications to send CCBs with request sizes that are larger than
MAXPHYS.  The pass(4) driver now limits queued requests to the I/O
size listed by the SIM driver in the maxio field in the Path
Inquiry (XPT_PATH_INQ) CCB.

There are some things things would be good to add:

1. Come up with a way to do unmapped I/O on multiple buffers.
   Currently the unmapped I/O interface operates on a struct bio,
   which includes only one address and length.  It would be nice
   to be able to send an unmapped scatter/gather list down to
   busdma.  This would allow eliminating the copy we currently do
   for data.

2. Add an ioctl to list currently outstanding CCBs in the various
   queues.

3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do
   that.

4. Test physical address support.  Virtual pointers and scatter
   gather lists have been tested, but I have not yet tested
   physical addresses or scatter/gather lists.

5. Investigate multiple queue support.  At the moment there is one
   queue of commands per pass(4) device.  If multiple processes
   open the device, they will submit I/O into the same queue and
   get events for the same completions.  This is probably the right
   model for most applications, but it is something that could be
   changed later on.

Also, add a new utility, camdd(8) that uses the asynchronous pass(4)
driver interface.

This utility is intended to be a basic data transfer/copy utility,
a simple benchmark utility, and an example of how to use the
asynchronous pass(4) interface.

It can copy data to and from pass(4) devices using any target queue
depth, starting offset and blocksize for the input and ouptut devices.
It currently only supports SCSI devices, but could be easily extended
to support ATA devices.

It can also copy data to and from regular files, block devices, tape
devices, pipes, stdin, and stdout.  It does not support queueing
multiple commands to any of those targets, since it uses the standard
read(2)/write(2)/writev(2)/readv(2) system calls.

The I/O is done by two threads, one for the reader and one for the
writer.  The reader thread sends completed read requests to the
writer thread in strictly sequential order, even if they complete
out of order.  That could be modified later on for random I/O patterns
or slightly out of order I/O.

camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from
the pass(4) driver and also to send request notifications internally.

For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR)
per CAM CCB on the reading side, and a scatter/gather list
(CAM_DATA_SG) on the writing side.  In addition to testing both
interfaces, this makes any potential reblocking of I/O easier.  No
data is copied between the reader and the writer, but rather the
reader's buffers are split into multiple I/O requests or combined
into a single I/O request depending on the input and output blocksize.

For the file I/O path, camdd(8) also uses a single buffer (read(2),
write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list
(readv(2), writev(2), preadv(2), pwritev(2)) on writes.

Things that would be nice to do for camdd(8) eventually:

1.  Add support for I/O pattern generation.  Patterns like all
    zeros, all ones, LBA-based patterns, random patterns, etc. Right
    Now you can always use /dev/zero, /dev/random, etc.

2.  Add support for a "sink" mode, so we do only reads with no
    writes.  Right now, you can use /dev/null.

3.  Add support for automatic queue depth probing, so that we can
    figure out the right queue depth on the input and output side
    for maximum throughput.  At the moment it defaults to 6.

4.  Add support for SATA device passthrough I/O.

5.  Add support for random LBAs and/or lengths on the input and
    output sides.

6.  Track average per-I/O latency and busy time.  The busy time
    and latency could also feed in to the automatic queue depth
    determination.

sys/cam/scsi/scsi_pass.h:
	Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue
	and fetch asynchronous CAM CCBs respectively.

	Although these ioctls do not have a declared argument, they
	both take a union ccb pointer.  If we declare a size here,
	the ioctl code in sys/kern/sys_generic.c will malloc and free
	a buffer for either the CCB or the CCB pointer (depending on
	how it is declared).  Since we have to keep a copy of the
	CCB (which is fairly large) anyway, having the ioctl malloc
	and free a CCB for each call is wasteful.

sys/cam/scsi/scsi_pass.c:
	Add asynchronous CCB support.

	Add two new ioctls, CAMIOQUEUE and CAMIOGET.

	CAMIOQUEUE adds a CCB to the incoming queue.  The CCB is
	executed immediately (and moved to the active queue) if it
	is an immediate CCB, but otherwise it will be executed
	in passstart() when a CCB is available from the transport layer.

	When CCBs are completed (because they are immediate or
	passdone() if they are queued), they are put on the done
	queue.

	If we get the final close on the device before all pending
	I/O is complete, all active I/O is moved to the abandoned
	queue and we increment the peripheral reference count so
	that the peripheral driver instance doesn't go away before
	all pending I/O is done.

	The new passcreatezone() function is called on the first
	call to the CAMIOQUEUE ioctl on a given device to allocate
	the UMA zones for I/O requests and S/G list buffers.  This
	may be good to move off to a taskqueue at some point.
	The new passmemsetup() function allocates memory and
	scatter/gather lists to hold the user's data, and copies
	in any data that needs to be written.  For virtual pointers
	(CAM_DATA_VADDR), the kernel buffer is malloced from the
	new pass(4) driver malloc bucket.  For virtual
	scatter/gather lists (CAM_DATA_SG), buffers are allocated
	from a new per-pass(9) UMA zone in MAXPHYS-sized chunks.
	Physical pointers are passed in unchanged.  We have support
	for up to 16 scatter/gather segments (for the user and
	kernel S/G lists) in the default struct pass_io_req, so
	requests with longer S/G lists require an extra kernel malloc.

	The new passcopysglist() function copies a user scatter/gather
	list to a kernel scatter/gather list.  The number of elements
	in each list may be different, but (obviously) the amount of data
	stored has to be identical.

	The new passmemdone() function copies data out for the
	CAM_DATA_VADDR and CAM_DATA_SG cases.

	The new passiocleanup() function restores data pointers in
	user CCBs and frees memory.

	Add new functions to support kqueue(2)/kevent(2):

	passreadfilt() tells kevent whether or not the done
	queue is empty.

	passkqfilter() adds a knote to our list.

	passreadfiltdetach() removes a knote from our list.

	Add a new function, passpoll(), for poll(2)/select(2)
	to use.

	Add devstat(9) support for the queued CCB path.

sys/cam/ata/ata_da.c:
	Add support for the BIO_VLIST bio type.

sys/cam/cam_ccb.h:
	Add a new enumeration for the xflags field in the CCB header.
	(This doesn't change the CCB header, just adds an enumeration to
	use.)

sys/cam/cam_xpt.c:
	Add a new function, xpt_setup_ccb_flags(), that allows specifying
	CCB flags.

sys/cam/cam_xpt.h:
	Add a prototype for xpt_setup_ccb_flags().

sys/cam/scsi/scsi_da.c:
	Add support for BIO_VLIST.

sys/dev/md/md.c:
	Add BIO_VLIST support to md(4).

sys/geom/geom_disk.c:
	Add BIO_VLIST support to the GEOM disk class.  Re-factor the I/O size
	limiting code in g_disk_start() a bit.

sys/kern/subr_bus_dma.c:
	Change _bus_dmamap_load_vlist() to take a starting offset and
	length.

	Add a new function, _bus_dmamap_load_pages(), that will load a list
	of physical pages starting at an offset.

	Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios.
	Allow unmapped I/O to start at an offset.

sys/kern/subr_uio.c:
	Add two new functions, physcopyin_vlist() and physcopyout_vlist().

sys/pc98/include/bus.h:
	Guard kernel-only parts of the pc98 machine/bus.h header with
	#ifdef _KERNEL.

	This allows userland programs to include <machine/bus.h> to get the
	definition of bus_addr_t and bus_size_t.

sys/sys/bio.h:
	Add a new bio flag, BIO_VLIST.

sys/sys/uio.h:
	Add prototypes for physcopyin_vlist() and physcopyout_vlist().

share/man/man4/pass.4:
	Document the CAMIOQUEUE and CAMIOGET ioctls.

usr.sbin/Makefile:
	Add camdd.

usr.sbin/camdd/Makefile:
	Add a makefile for camdd(8).

usr.sbin/camdd/camdd.8:
	Man page for camdd(8).

usr.sbin/camdd/camdd.c:
	The new camdd(8) utility.

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-12-03 20:54:55 +00:00

141 lines
5.2 KiB
C
Raw Blame History

/*-
* Data structures and definitions for dealing with the
* Common Access Method Transport (xpt) layer.
*
* Copyright (c) 1997 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _CAM_CAM_XPT_H
#define _CAM_CAM_XPT_H 1
/* Forward Declarations */
union ccb;
struct cam_periph;
struct cam_ed;
struct cam_sim;
/*
* Definition of a CAM path. Paths are created from bus, target, and lun ids
* via xpt_create_path and allow for reference to devices without recurring
* lookups in the edt.
*/
struct cam_path;
/* Path functions */
#ifdef _KERNEL
/*
* Definition of an async handler callback block. These are used to add
* SIMs and peripherals to the async callback lists.
*/
struct async_node {
SLIST_ENTRY(async_node) links;
u_int32_t event_enable; /* Async Event enables */
u_int32_t event_lock; /* Take SIM lock for handlers. */
void (*callback)(void *arg, u_int32_t code,
struct cam_path *path, void *args);
void *callback_arg;
};
SLIST_HEAD(async_list, async_node);
SLIST_HEAD(periph_list, cam_periph);
void xpt_action(union ccb *new_ccb);
void xpt_action_default(union ccb *new_ccb);
union ccb *xpt_alloc_ccb(void);
union ccb *xpt_alloc_ccb_nowait(void);
void xpt_free_ccb(union ccb *free_ccb);
void xpt_setup_ccb_flags(struct ccb_hdr *ccb_h,
struct cam_path *path,
u_int32_t priority,
u_int32_t flags);
void xpt_setup_ccb(struct ccb_hdr *ccb_h,
struct cam_path *path,
u_int32_t priority);
void xpt_merge_ccb(union ccb *master_ccb,
union ccb *slave_ccb);
cam_status xpt_create_path(struct cam_path **new_path_ptr,
struct cam_periph *perph,
path_id_t path_id,
target_id_t target_id, lun_id_t lun_id);
cam_status xpt_create_path_unlocked(struct cam_path **new_path_ptr,
struct cam_periph *perph,
path_id_t path_id,
target_id_t target_id, lun_id_t lun_id);
int xpt_getattr(char *buf, size_t len, const char *attr,
struct cam_path *path);
void xpt_free_path(struct cam_path *path);
void xpt_path_counts(struct cam_path *path, uint32_t *bus_ref,
uint32_t *periph_ref, uint32_t *target_ref,
uint32_t *device_ref);
int xpt_path_comp(struct cam_path *path1,
struct cam_path *path2);
int xpt_path_comp_dev(struct cam_path *path,
struct cam_ed *dev);
void xpt_print_path(struct cam_path *path);
void xpt_print_device(struct cam_ed *device);
void xpt_print(struct cam_path *path, const char *fmt, ...);
int xpt_path_string(struct cam_path *path, char *str,
size_t str_len);
path_id_t xpt_path_path_id(struct cam_path *path);
target_id_t xpt_path_target_id(struct cam_path *path);
lun_id_t xpt_path_lun_id(struct cam_path *path);
struct cam_sim *xpt_path_sim(struct cam_path *path);
struct cam_periph *xpt_path_periph(struct cam_path *path);
void xpt_async(u_int32_t async_code, struct cam_path *path,
void *async_arg);
void xpt_rescan(union ccb *ccb);
void xpt_hold_boot(void);
void xpt_release_boot(void);
void xpt_lock_buses(void);
void xpt_unlock_buses(void);
struct mtx * xpt_path_mtx(struct cam_path *path);
#define xpt_path_lock(path) mtx_lock(xpt_path_mtx(path))
#define xpt_path_unlock(path) mtx_unlock(xpt_path_mtx(path))
#define xpt_path_assert(path, what) mtx_assert(xpt_path_mtx(path), (what))
#define xpt_path_owned(path) mtx_owned(xpt_path_mtx(path))
#define xpt_path_sleep(path, chan, priority, wmesg, timo) \
msleep((chan), xpt_path_mtx(path), (priority), (wmesg), (timo))
cam_status xpt_register_async(int event, ac_callback_t *cbfunc,
void *cbarg, struct cam_path *path);
cam_status xpt_compile_path(struct cam_path *new_path,
struct cam_periph *perph,
path_id_t path_id,
target_id_t target_id,
lun_id_t lun_id);
cam_status xpt_clone_path(struct cam_path **new_path,
struct cam_path *path);
void xpt_copy_path(struct cam_path *new_path,
struct cam_path *path);
void xpt_release_path(struct cam_path *path);
#endif /* _KERNEL */
#endif /* _CAM_CAM_XPT_H */
Reference in New Issue View Git Blame Copy Permalink