3918bafb69
require the addition of flag 0x80000 to their config line in pccard.conf(5). This flag is not optional. These Linksys cards will not be recognized without it. Reviewed by: imp, iwasaki
346 lines
9.2 KiB
C
346 lines
9.2 KiB
C
/*
|
|
* Copyright (c) 1995, David Greenman
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/uio.h>
|
|
#include <sys/select.h>
|
|
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <net/ethernet.h>
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/if_mib.h>
|
|
|
|
#include <dev/ed/if_edreg.h>
|
|
#include <dev/ed/if_edvar.h>
|
|
#include <dev/pccard/pccardvar.h>
|
|
#include <dev/pccard/pccarddevs.h>
|
|
|
|
#include "card_if.h"
|
|
|
|
/*
|
|
* PC-Card (PCMCIA) specific code.
|
|
*/
|
|
static int ed_pccard_match(device_t);
|
|
static int ed_pccard_probe(device_t);
|
|
static int ed_pccard_attach(device_t);
|
|
static int ed_pccard_detach(device_t);
|
|
|
|
static void ax88190_geteprom(struct ed_softc *);
|
|
static int ed_pccard_memwrite(device_t dev, off_t offset, u_char byte);
|
|
static int ed_pccard_Linksys(device_t dev);
|
|
static int linksys;
|
|
|
|
static device_method_t ed_pccard_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, pccard_compat_probe),
|
|
DEVMETHOD(device_attach, pccard_compat_attach),
|
|
DEVMETHOD(device_detach, ed_pccard_detach),
|
|
|
|
/* Card interface */
|
|
DEVMETHOD(card_compat_match, ed_pccard_match),
|
|
DEVMETHOD(card_compat_probe, ed_pccard_probe),
|
|
DEVMETHOD(card_compat_attach, ed_pccard_attach),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t ed_pccard_driver = {
|
|
"ed",
|
|
ed_pccard_methods,
|
|
sizeof(struct ed_softc)
|
|
};
|
|
|
|
static devclass_t ed_pccard_devclass;
|
|
|
|
DRIVER_MODULE(if_ed, pccard, ed_pccard_driver, ed_pccard_devclass, 0, 0);
|
|
|
|
/*
|
|
* ed_pccard_detach - unload the driver and clear the table.
|
|
* XXX TODO:
|
|
* This is usually called when the card is ejected, but
|
|
* can be caused by a modunload of a controller driver.
|
|
* The idea is to reset the driver's view of the device
|
|
* and ensure that any driver entry points such as
|
|
* read and write do not hang.
|
|
*/
|
|
static int
|
|
ed_pccard_detach(device_t dev)
|
|
{
|
|
struct ed_softc *sc = device_get_softc(dev);
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
|
|
if (sc->gone) {
|
|
device_printf(dev, "already unloaded\n");
|
|
return (0);
|
|
}
|
|
ed_stop(sc);
|
|
ifp->if_flags &= ~IFF_RUNNING;
|
|
ether_ifdetach(ifp, ETHER_BPF_SUPPORTED);
|
|
sc->gone = 1;
|
|
bus_teardown_intr(dev, sc->irq_res, sc->irq_handle);
|
|
ed_release_resources(dev);
|
|
return (0);
|
|
}
|
|
|
|
static const struct pccard_product ed_pccard_products[] = {
|
|
{ PCCARD_STR_KINGSTON_KNE2, PCCARD_VENDOR_KINGSTON,
|
|
PCCARD_PRODUCT_KINGSTON_KNE2, 0, NULL, NULL },
|
|
{ NULL }
|
|
};
|
|
|
|
static int
|
|
ed_pccard_match(device_t dev)
|
|
{
|
|
const struct pccard_product *pp;
|
|
|
|
if ((pp = pccard_product_lookup(dev, ed_pccard_products,
|
|
sizeof(ed_pccard_products[0]), NULL)) != NULL) {
|
|
device_set_desc(dev, pp->pp_name);
|
|
return 0;
|
|
}
|
|
return EIO;
|
|
}
|
|
|
|
/*
|
|
* Probe framework for pccards. Replicates the standard framework,
|
|
* minus the pccard driver registration and ignores the ether address
|
|
* supplied (from the CIS), relying on the probe to find it instead.
|
|
*/
|
|
static int
|
|
ed_pccard_probe(device_t dev)
|
|
{
|
|
struct ed_softc *sc = device_get_softc(dev);
|
|
int flags = device_get_flags(dev);
|
|
int error;
|
|
|
|
if (ED_FLAGS_GETTYPE(flags) == ED_FLAGS_AX88190) {
|
|
/* Special setup for AX88190 */
|
|
int iobase;
|
|
|
|
/* Allocate the port resource during setup. */
|
|
error = ed_alloc_port(dev, 0, ED_NOVELL_IO_PORTS);
|
|
if (error)
|
|
return (error);
|
|
|
|
sc->asic_offset = ED_NOVELL_ASIC_OFFSET;
|
|
sc->nic_offset = ED_NOVELL_NIC_OFFSET;
|
|
sc->chip_type = ED_CHIP_TYPE_AX88190;
|
|
|
|
/*
|
|
* Set Attribute Memory IOBASE Register
|
|
*/
|
|
iobase = rman_get_start(sc->port_res);
|
|
ed_pccard_memwrite(dev, ED_AX88190_IOBASE0,
|
|
iobase & 0xff);
|
|
ed_pccard_memwrite(dev, ED_AX88190_IOBASE1,
|
|
(iobase >> 8) & 0xff);
|
|
ax88190_geteprom(sc);
|
|
|
|
ed_release_resources(dev);
|
|
error = ed_probe_Novell(dev, 0, flags);
|
|
goto end2;
|
|
}
|
|
|
|
error = ed_probe_Novell(dev, 0, flags);
|
|
if (error == 0)
|
|
goto end;
|
|
ed_release_resources(dev);
|
|
|
|
error = ed_probe_WD80x3(dev, 0, flags);
|
|
if (error == 0)
|
|
goto end;
|
|
ed_release_resources(dev);
|
|
goto end2;
|
|
|
|
end:
|
|
if (ED_FLAGS_GETTYPE(flags) & ED_FLAGS_LINKSYS) {
|
|
linksys = ed_pccard_Linksys(dev);
|
|
} else {
|
|
linksys = 0;
|
|
}
|
|
end2:
|
|
if (error == 0)
|
|
error = ed_alloc_irq(dev, 0, 0);
|
|
|
|
ed_release_resources(dev);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
ed_pccard_attach(device_t dev)
|
|
{
|
|
struct ed_softc *sc = device_get_softc(dev);
|
|
int flags = device_get_flags(dev);
|
|
int error;
|
|
int i;
|
|
u_char sum;
|
|
u_char ether_addr[ETHER_ADDR_LEN];
|
|
|
|
if (sc->port_used > 0)
|
|
ed_alloc_port(dev, sc->port_rid, sc->port_used);
|
|
if (sc->mem_used)
|
|
ed_alloc_memory(dev, sc->mem_rid, sc->mem_used);
|
|
ed_alloc_irq(dev, sc->irq_rid, 0);
|
|
|
|
error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET,
|
|
edintr, sc, &sc->irq_handle);
|
|
if (error) {
|
|
printf("setup intr failed %d \n", error);
|
|
ed_release_resources(dev);
|
|
return (error);
|
|
}
|
|
|
|
if (linksys == 0) {
|
|
pccard_get_ether(dev, ether_addr);
|
|
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
|
|
sum |= ether_addr[i];
|
|
if (sum)
|
|
bcopy(ether_addr, sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
|
|
}
|
|
|
|
error = ed_attach(sc, device_get_unit(dev), flags);
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
ax88190_geteprom(struct ed_softc *sc)
|
|
{
|
|
int prom[16],i;
|
|
u_char tmp;
|
|
struct {
|
|
unsigned char offset, value;
|
|
} pg_seq[] = {
|
|
{ED_P0_CR, ED_CR_RD2|ED_CR_STP}, /* Select Page0 */
|
|
{ED_P0_DCR, 0x01},
|
|
{ED_P0_RBCR0, 0x00}, /* Clear the count regs. */
|
|
{ED_P0_RBCR1, 0x00},
|
|
{ED_P0_IMR, 0x00}, /* Mask completion irq. */
|
|
{ED_P0_ISR, 0xff},
|
|
{ED_P0_RCR, ED_RCR_MON | ED_RCR_INTT}, /* Set To Monitor */
|
|
{ED_P0_TCR, ED_TCR_LB0}, /* loopback mode. */
|
|
{ED_P0_RBCR0, 32},
|
|
{ED_P0_RBCR1, 0x00},
|
|
{ED_P0_RSAR0, 0x00},
|
|
{ED_P0_RSAR1, 0x04},
|
|
{ED_P0_CR ,ED_CR_RD0 | ED_CR_STA},
|
|
};
|
|
|
|
/* Reset Card */
|
|
tmp = ed_asic_inb(sc, ED_NOVELL_RESET);
|
|
ed_asic_outb(sc, ED_NOVELL_RESET, tmp);
|
|
DELAY(5000);
|
|
ed_asic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STP);
|
|
DELAY(5000);
|
|
|
|
/* Card Settings */
|
|
for (i = 0; i < sizeof(pg_seq) / sizeof(pg_seq[0]); i++)
|
|
ed_nic_outb(sc, pg_seq[i].offset, pg_seq[i].value);
|
|
|
|
/* Get Data */
|
|
for (i = 0; i < 16; i++)
|
|
prom[i] = ed_asic_inb(sc, 0);
|
|
/*
|
|
for (i = 0; i < 16; i++)
|
|
printf("ax88190 eprom [%02d] %02x %02x\n",
|
|
i,prom[i] & 0xff,prom[i] >> 8);
|
|
*/
|
|
sc->arpcom.ac_enaddr[0] = prom[0] & 0xff;
|
|
sc->arpcom.ac_enaddr[1] = prom[0] >> 8;
|
|
sc->arpcom.ac_enaddr[2] = prom[1] & 0xff;
|
|
sc->arpcom.ac_enaddr[3] = prom[1] >> 8;
|
|
sc->arpcom.ac_enaddr[4] = prom[2] & 0xff;
|
|
sc->arpcom.ac_enaddr[5] = prom[2] >> 8;
|
|
}
|
|
|
|
static int
|
|
ed_pccard_memwrite(device_t dev, off_t offset, u_char byte)
|
|
{
|
|
int cis_rid;
|
|
struct resource *cis;
|
|
|
|
cis_rid = 0;
|
|
cis = bus_alloc_resource(dev, SYS_RES_MEMORY, &cis_rid, 0, ~0, 4 << 10, RF_ACTIVE | RF_SHAREABLE);
|
|
if (cis == NULL)
|
|
return (ENXIO);
|
|
CARD_SET_RES_FLAGS(device_get_parent(dev), dev, SYS_RES_MEMORY, cis_rid, PCCARD_A_MEM_ATTR);
|
|
|
|
bus_space_write_1(rman_get_bustag(cis), rman_get_bushandle(cis), offset, byte);
|
|
|
|
bus_deactivate_resource(dev, SYS_RES_MEMORY, cis_rid, cis);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, cis_rid, cis);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Probe the Ethernet MAC addrees for PCMCIA Linksys EtherFast 10/100
|
|
* and compatible cards (DL10019C Ethernet controller).
|
|
*
|
|
* Note: The PAO patches try to use more memory for the card, but that
|
|
* seems to fail for my card. A future optimization would add this back
|
|
* conditionally.
|
|
*/
|
|
static int
|
|
ed_pccard_Linksys(device_t dev)
|
|
{
|
|
struct ed_softc *sc = device_get_softc(dev);
|
|
u_char sum;
|
|
int i;
|
|
|
|
/*
|
|
* Linksys registers(offset from ASIC base)
|
|
*
|
|
* 0x04-0x09 : Physical Address Register 0-5 (PAR0-PAR5)
|
|
* 0x0A : Card ID Register (CIR)
|
|
* 0x0B : Check Sum Register (SR)
|
|
*/
|
|
for (sum = 0, i = 0x04; i < 0x0c; i++)
|
|
sum += ed_asic_inb(sc, i);
|
|
if (sum != 0xff)
|
|
return (0); /* invalid DL10019C */
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++) {
|
|
sc->arpcom.ac_enaddr[i] = ed_asic_inb(sc, 0x04 + i);
|
|
}
|
|
|
|
ed_nic_outb(sc, ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS);
|
|
sc->isa16bit = 1;
|
|
sc->type = ED_TYPE_NE2000;
|
|
sc->type_str = "Linksys";
|
|
return (1);
|
|
}
|