718cf2ccb9
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
182 lines
8.3 KiB
C
182 lines
8.3 KiB
C
/* $NetBSD: nsphyterreg.h,v 1.4 2005/12/11 12:22:42 christos Exp $ */
|
|
|
|
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause-NetBSD
|
|
*
|
|
* Copyright (c) 1999, 2001 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
|
|
* NASA Ames Research Center.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _DEV_MII_NSPHYTERREG_H_
|
|
#define _DEV_MII_NSPHYTERREG_H_
|
|
|
|
/*
|
|
* DP83843 registers; We also have the MacPHYTER (DP83815) internal
|
|
* PHY register definitions here, since the two are, for our purposes,
|
|
* compatible.
|
|
*/
|
|
|
|
#define MII_NSPHYTER_PHYSTS 0x10 /* PHY status */
|
|
#define PHYSTS_REL 0x8000 /* receive error latch */
|
|
#define PHYSTS_CIML 0x4000 /* CIM latch */
|
|
#define PHYSTS_FCSL 0x2000 /* false carrier sense latch */
|
|
#define PHYSTS_DEVRDY 0x0800 /* device ready */
|
|
#define PHYSTS_PGRX 0x0400 /* page received */
|
|
#define PHYSTS_ANEGEN 0x0200 /* autoneg. enabled */
|
|
#define PHYSTS_MIIINTR 0x0100 /* MII interrupt */
|
|
#define PHYSTS_REMFAULT 0x0080 /* remote fault */
|
|
#define PHYSTS_JABBER 0x0040 /* jabber detect */
|
|
#define PHYSTS_NWAYCOMP 0x0020 /* NWAY complete */
|
|
#define PHYSTS_RESETSTAT 0x0010 /* reset status */
|
|
#define PHYSTS_LOOPBACK 0x0008 /* loopback status */
|
|
#define PHYSTS_DUPLEX 0x0004 /* full duplex */
|
|
#define PHYSTS_SPEED10 0x0002 /* speed == 10Mb/s */
|
|
#define PHYSTS_LINK 0x0001 /* link up */
|
|
/* Below are the MacPHYTER bits that are different. */
|
|
#define PHYSTS_MP_REL 0x2000 /* receive error latch */
|
|
#define PHYSTS_MP_POLARITY 0x1000 /* polarity inverted */
|
|
#define PHYSTS_MP_FCSL 0x0800 /* false carrier sense latch */
|
|
#define PHYSTS_MP_SIGNAL 0x0400 /* signal detect */
|
|
#define PHYSTS_MP_DESCRLK 0x0200 /* de-scrambler lock */
|
|
#define PHYSTS_MP_PGRX 0x0100 /* page received */
|
|
#define PHYSTS_MP_MIIINTR 0x0080 /* MII interrupt */
|
|
#define PHYSTS_MP_REMFAULT 0x0040 /* remote fault */
|
|
#define PHYSTS_MP_JABBER 0x0020 /* jabber detect */
|
|
#define PHYSTS_MP_NWAYCOMP 0x0010 /* NWAY complete */
|
|
|
|
|
|
#define MII_NSPHYTER_MIPSCR 0x11 /* MII interrupt PHY specific
|
|
control */
|
|
|
|
#define MIPSCR_INTEN 0x0002 /* interrupt enable */
|
|
#define MIPSCR_TINT 0x0001 /* test interrupt */
|
|
|
|
|
|
#define MII_NSPHYTER_MIPGSR 0x12 /* MII interrupt PHY generic
|
|
status */
|
|
#define MIPGSR_MINT 0x8000 /* MII interrupt pending */
|
|
/* The bits below are MacPHYTER only. */
|
|
#define MIPGSR_MSK_LINK 0x4000 /* mask link status event */
|
|
#define MIPGSR_MSK_JAB 0x2000 /* mask jabber event */
|
|
#define MIPGSR_MSK_RF 0x1000 /* mask remote fault event */
|
|
#define MIPGSR_MSK_ANC 0x0800 /* mask auto-neg complete event */
|
|
#define MIPGSR_MSK_FHF 0x0400 /* mask false carrier half full event */
|
|
#define MIPGSR_MSK_RHF 0x0200 /* mask RX error half full event */
|
|
|
|
#define MII_NSPHYTER_DCR 0x13 /* Disconnect counter */
|
|
|
|
#define MII_NSPHYTER_FCSCR 0x14 /* False carrier sense counter */
|
|
|
|
#define MII_NSPHYTER_RECR 0x15 /* Receive error counter */
|
|
|
|
|
|
#define MII_NSPHYTER_PCSR 0x16 /* PCS configuration and status */
|
|
#define PCSR_SINGLE_SD 0x8000 /* single-ended SD mode */
|
|
#define PCSR_FEFI_EN 0x4000 /* far end fault indication mode */
|
|
#define PCSR_DESCR_TO_RST 0x2000 /* reset descrambler timeout counter */
|
|
#define PCSR_DESCR_TO_SEL 0x1000 /* descrambler timer mode */
|
|
#define PCSR_DESCR_TO_DIS 0x0800 /* descrambler timer disable */
|
|
#define PCSR_LD_SCR_SD 0x0400 /* load scrambler seed */
|
|
#define PCSR_TX_QUIET 0x0200 /* 100Mb/s transmit true quiet mode */
|
|
#define PCSR_TX_PATTERN 0x0180 /* 100Mb/s transmit test pattern */
|
|
#define PCSR_F_LINK_100 0x0040 /* force good link in 100Mb/s */
|
|
#define PCSR_CIM_DIS 0x0020 /* carrier integrity monitor disable */
|
|
#define PCSR_CIM_STATUS 0x0010 /* carrier integrity monitor status */
|
|
#define PCSR_CODE_ERR 0x0008 /* code errors */
|
|
#define PCSR_PME_ERR 0x0004 /* premature end errors */
|
|
#define PCSR_LINK_ERR 0x0002 /* link errors */
|
|
#define PCSR_PKT_ERR 0x0001 /* packet errors */
|
|
/* Below are the MacPHYTER bits that are different. */
|
|
#define PCSR_MP_BYP_4B5B 0x1000 /* bypass encoder */
|
|
#define PCSR_MP_FREE_CLK 0x0800 /* free funning RX clock */
|
|
#define PCSR_MP_TQ_EN 0x0400 /* enable True Quiet mode */
|
|
#define PCSR_MP_SD_FORCE_B 0x0200 /* force signal detection */
|
|
#define PCSR_MP_SD_OPTION 0x0100 /* enhanced signal detection alg. */
|
|
#define PCSR_MP_NRZI_BYPASS 0x0004 /* NRZI bypass enabled */
|
|
|
|
|
|
/* The bits below are not on MacPHYTER. */
|
|
#define MII_NSPHYTER_LBR 0x17 /* loopback and bypass */
|
|
#define LBR_BP_STRETCH 0x4000 /* bypass LED stretching */
|
|
#define LBR_BP_4B5B 0x2000 /* bypass encoding/decoding */
|
|
#define LBR_BP_SCR 0x1000 /* bypass scrambler/descrambler */
|
|
#define LBR_BP_RX 0x0800 /* bypass receive function */
|
|
#define LBR_BP_TX 0x0400 /* bypass transmit function */
|
|
#define LBR_100_DP_CTL 0x0380 /* 100Mb/s data patch control */
|
|
#define LBR_TW_LBEN 0x0020 /* TWISTER loopback enable */
|
|
#define LBR_10_ENDEC_LB 0x0010 /* 10Mb/s ENDEC loopback */
|
|
|
|
|
|
/* The bits below are not on MacPHYTER. */
|
|
#define MII_NSPHYTER_10BTSCR 0x18 /* 10baseT status and control */
|
|
#define BTSCR_AUI_TPI 0x2000 /* TREX operating mode */
|
|
#define BTSCR_RX_SERIAL 0x1000 /* 10baseT RX serial mode */
|
|
#define BTSCR_TX_SERIAL 0x0800 /* 10baseT TX serial mode */
|
|
#define BTSCR_POL_DS 0x0400 /* polarity detection and correction
|
|
disable */
|
|
#define BTSCR_AUTOSW_EN 0x0200 /* AUI/TPI autoswitch */
|
|
#define BTSCR_LP_DS 0x0100 /* link pulse disable */
|
|
#define BTSCR_HB_DS 0x0080 /* heartbeat disabled */
|
|
#define BTSCR_LS_SEL 0x0040 /* low squelch select */
|
|
#define BTSCR_AUI_SEL 0x0020 /* AUI select */
|
|
#define BTSCR_JAB_DS 0x0010 /* jabber disable */
|
|
#define BTSCR_THIN_SEL 0x0008 /* thin ethernet select */
|
|
#define BTSCR_TX_FILT_DS 0x0004 /* TPI receive filter disable */
|
|
|
|
|
|
#define MII_NSPHYTER_PHYCTRL 0x19 /* PHY control */
|
|
#define PHYCTRL_TW_EQSEL 0x3000 /* TWISTER e.q. select */
|
|
#define PHYCTRL_BLW_DS 0x0800 /* TWISTER base line wander disable */
|
|
#define PHYCTRL_REPEATER 0x0200 /* repeater mode */
|
|
#define PHYCTRL_LED_TXRX_MODE 0x0180 /* LED TX/RX mode */
|
|
#define PHYCTRL_LED_DUP_MODE 0x0040 /* LED DUP mode */
|
|
#define PHYCTRL_FX_EN 0x0020 /* Fiber mode enable */
|
|
#define PHYCTRL_PHYADDR 0x001f /* PHY address */
|
|
/* Below are the MacPHYTER bits that are different. */
|
|
#define PHYCRTL_MP_PSR_15 0x0800 /* BIST sequence select */
|
|
#define PHYCTRL_MP_BIST_STAT 0x0400 /* BIST passed */
|
|
#define PHYCTRL_MP_BIST_START 0x0200 /* start BIST */
|
|
#define PHYCTRL_MP_BP_STRETCH 0x0100 /* bypass LED stretching */
|
|
#define PHYCTRL_MP_PAUSE_STS 0x0080 /* pause status */
|
|
|
|
|
|
/* The bits below are MacPHYTER only. */
|
|
#define MII_MACPHYTER_TBTCTL 0x1a /* 10baseT Control */
|
|
#define TBTCTL_LOOPBACK_10_DIS 0x0100 /* loopback 10Mb/s disable */
|
|
#define TBTCTL_LP_DIS 0x0080 /* link pulse disable */
|
|
#define TBTCTL_FORCE_LINK_10 0x0040 /* force 10Mb/s link good */
|
|
#define TBTCTL_FORCE_POL_COR 0x0020 /* force polarity correction */
|
|
#define TBTCTL_INV_POLARITY 0x0010 /* inverted polarity */
|
|
#define TBTCTL_AUTOPOL_DIS 0x0008 /* auto-polarity disable */
|
|
#define TBTCTL_HEARTBEAT_DIS 0x0002 /* heartbeat disable */
|
|
#define TBTCTL_JABBER_DIS 0x0001 /* jabber disable */
|
|
|
|
#endif /* _DEV_MII_NSPHYTERREG_H_ */
|