3aa12267a5
(except in netccitt, netiso and netns) that I didn't notice when I fixed "all" such warnings before.
2287 lines
68 KiB
C
2287 lines
68 KiB
C
/*matcd.c--------------------------------------------------------------------
|
|
Matsushita(Panasonic) / Creative CD-ROM Driver (matcd)
|
|
Authored by Frank Durda IV
|
|
|
|
Copyright 1994, 1995 Frank Durda IV. All rights reserved.
|
|
"FDIV" is a trademark of Frank Durda IV.
|
|
|
|
|
|
Redistribution and use in source and binary forms, with or
|
|
without modification, are permitted provided that the following
|
|
conditions are met:
|
|
1. Redistributions of source code must retain the above copyright
|
|
notice positioned at the very beginning of this file without
|
|
modification, all copyright strings, all related programming
|
|
codes that display the copyright strings, this list of
|
|
conditions and the following disclaimer.
|
|
2. Redistributions in binary form must contain all copyright strings
|
|
and related programming code that display the copyright strings.
|
|
3. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in
|
|
the documentation and/or other materials provided with the
|
|
distribution.
|
|
4. All advertising materials mentioning features or use of this
|
|
software must display the following acknowledgement:
|
|
"The Matsushita/Panasonic CD-ROM driver was developed
|
|
by Frank Durda IV for use with "FreeBSD" and similar
|
|
operating systems."
|
|
"Similar operating systems" includes mainly non-profit oriented
|
|
systems for research and education, including but not restricted
|
|
to "NetBSD", "386BSD", and "Mach" (by CMU). The wording of the
|
|
acknowledgement (in electronic form or printed text) may not be
|
|
changed without permission from the author.
|
|
5. Absolutely no warranty of function, fitness or purpose is made
|
|
by the author Frank Durda IV.
|
|
6. Neither the name of the author nor the name "FreeBSD" may
|
|
be used to endorse or promote products derived from this software
|
|
without specific prior written permission.
|
|
(The author can be reached at bsdmail@nemesis.lonestar.org)
|
|
7. The product containing this software must meet all of these
|
|
conditions even if it is unsupported, not a complete system
|
|
and/or does not contain compiled code.
|
|
8. These conditions will be in force for the full life of the
|
|
copyright.
|
|
9. If all the above conditions are met, modifications to other
|
|
parts of this file may be freely made, although any person
|
|
or persons making changes do not receive the right to add their
|
|
name or names to the copyright strings and notices in this
|
|
software. Persons making changes are encouraged to insert edit
|
|
history in matcd.c and to put your name and details of the
|
|
change there.
|
|
10. You must have prior written permission from the author to
|
|
deviate from these terms.
|
|
|
|
Vendors who produce product(s) containing this code are encouraged
|
|
(but not required) to provide copies of the finished product(s) to
|
|
the author and to correspond with the author about development
|
|
activity relating to this code. Donations of development hardware
|
|
and/or software are also welcome. (This is one of the faster ways
|
|
to get a driver developed for a device.)
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE DEVELOPER(S) ``AS IS'' AND ANY
|
|
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE DEVELOPER(S) BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
|
|
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
|
|
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
-----------------------------------------------------------------------------
|
|
Dedicated to: My family and Max, my Golden Retriever
|
|
|
|
Thanks to: Jordan Hubbard (jkh) for getting me ramped-up to 2.x system
|
|
quickly enough to make the 2.1 release. He put up with
|
|
plenty of silly questions.
|
|
|
|
and The people who donated equipment and other material to make
|
|
development of this driver possible. Donations and
|
|
sponsors for projects are appreciated.
|
|
|
|
|
|
-----------------------------------------------------------------------------
|
|
Edit History - (should be in sync with any source control log entries)
|
|
|
|
Never seen one of these before? Ok, here is how it works.
|
|
Every time you change the code, you increment the edit number,
|
|
that number over there in the <%d> and in the (%d) in the
|
|
version string. You never set this number lower than it is.
|
|
Near, or preferably on lines that change, insert the edit
|
|
number. If there is a number there already, you can replace it
|
|
with a newer one.
|
|
|
|
In the edit history, start with the edit number, and a good
|
|
description of what changes were made. Then follow it with
|
|
the date, your name and an EMAIL address where you can be reached.
|
|
|
|
Please follow this practice; it helps leave understandable code in
|
|
your wake.
|
|
|
|
FYI, you have major and minor release codes. These are numbered
|
|
1 thru n. Major feature additions should get a new major release
|
|
number. Minor releases start with a null and then letters
|
|
A thru Z. So 3A(456) is Major release 3, Minor release 1,
|
|
Edit 456 (in Microsoft-ese that would be 03.01.456), and 5(731)
|
|
is Major release 5, Minor release 0, Edit 731. Typically only the
|
|
author will change the major and minor release codes.
|
|
|
|
EDIT edit Edit HISTORY history History
|
|
|
|
<1> This initial version is to get basic filesystem I/O working
|
|
using the SoundBlaster 16 interface. The stand-alone adapter
|
|
card doesn't work yet.
|
|
December 1994 Frank Durda IV bsdmail@nemesis.lonestar.org
|
|
|
|
<2> Corrections to resolve a race condition when multiple drives
|
|
on the same controller was active. Fixed drive 1 & 2 swap
|
|
problem. See selectdrive().
|
|
21-Jan-95 Frank Durda IV bsdmail@nemesis.lonestar.org
|
|
|
|
<3> Added automatic probing and support for all Creative Labs sound
|
|
cards with the Creative/Panasonic interface and the stand-alone
|
|
interface adapters. See AUTOHUNT and FULLCONFIG conditionals
|
|
for more information.
|
|
21-Jan-95 Frank Durda IV bsdmail@nemesis.lonestar.org
|
|
|
|
<4> Rebundled debug conditionals.
|
|
14-Feb-95 Frank Durda IV bsdmail@nemesis.lonestar.org
|
|
|
|
<5> Changes needed to work on FreeBSD 2.1. Also added draincmd
|
|
since some conditions cause the drive to produce surprise data.
|
|
See setmode and draincmd
|
|
19-Feb-95 Frank Durda IV bsdmail@nemesis.lonestar.org
|
|
|
|
<6> Got rid of some redundant error code by creating chk_error().
|
|
Also built a nice generic buss-lock function.
|
|
20-Feb-95 Frank Durda IV bsdmail@nemesis.lonestar.org
|
|
|
|
<7> Improved comments, general structuring.
|
|
Fixed a problem with disc eject not working if LOCKDRIVE was set.
|
|
Apparently the drive will reject an EJECT command if the drive
|
|
is LOCKED.
|
|
21-Feb-95 Frank Durda IV bsdmail@nemesis.lonestar.org
|
|
|
|
Edit number code marking begins here - earlier edits were during development.
|
|
|
|
<8> Final device name selected and actually made to compile under
|
|
>2.0. For newer systems, it is "matcd", for older it is "mat".
|
|
24-Feb-95 Frank Durda IV bsdmail@nemesis.lonestar.org
|
|
|
|
<9> Added some additional disk-related ioctl functions that didn't
|
|
make it into earlier versions.
|
|
26-Feb-95 Frank Durda IV bsdmail@nemesis.lonestar.org
|
|
|
|
<10> Updated some conditionals so the code will compile under
|
|
1.1.5.1, although this is not the supported platform.
|
|
Also found that some other devices probe code was changing the
|
|
settings for the port 0x302 debug board, so added code to set it
|
|
to a sane state before we use it.
|
|
26-Feb-95 Frank Durda IV bsdmail@nemesis.lonestar.org
|
|
|
|
|
|
---------------------------------------------------------------------------*/
|
|
|
|
/*Match this format: Version__dc(d)__dd-mmm-yy */
|
|
static char MATCDVERSION[]="Version 1(10) 26-Feb-95";
|
|
|
|
/* The following strings may not be changed*/
|
|
static char MATCDCOPYRIGHT[] = "Matsushita CD-ROM driver, Copr. 1994,1995 Frank Durda IV";
|
|
/* The proceeding strings may not be changed*/
|
|
|
|
|
|
/*---------------------------------------------------------------------------
|
|
Include declarations
|
|
---------------------------------------------------------------------------*/
|
|
|
|
#include "types.h"
|
|
#include "param.h"
|
|
#include "systm.h"
|
|
|
|
#include "buf.h"
|
|
#include "dkbad.h"
|
|
#include "cdio.h"
|
|
#include "conf.h"
|
|
#include "disklabel.h"
|
|
#include "errno.h"
|
|
#include "file.h"
|
|
#include "i386/isa/isa.h"
|
|
#include "i386/isa/isa_device.h"
|
|
#include "ioctl.h"
|
|
#include "proc.h"
|
|
#include "stat.h"
|
|
#include "uio.h"
|
|
|
|
#include "options.h" /*Conditional compile options and
|
|
probe port hints*/
|
|
#include "matcd.h" /*Drive-related defines and strings*/
|
|
#include "creative.h" /*Host interface related defines*/
|
|
|
|
|
|
/*---------------------------------------------------------------------------
|
|
Defines and structures
|
|
---------------------------------------------------------------------------*/
|
|
|
|
#ifdef FULLCONFIG
|
|
#define NUMCTRLRS 4 /*With modern boards, four is max*/
|
|
#else /*FULLCONFIG*/
|
|
#define NUMCTRLRS 1 /*Produces a slightly smaller kernel*/
|
|
#endif /*FULLCONFIG*/
|
|
#define DRIVESPERC 4 /*This is a constant*/
|
|
#define TOTALDRIVES NUMCTRLRS*DRIVESPERC /*Max possible drives*/
|
|
#if DIAGPORT > 0xff /*<10>*/
|
|
#define DIAGOUT outw /*<10>*/
|
|
#else /*DIAGPORT*/ /*<10>*/
|
|
#define DIAGOUT outb /*<10>*/
|
|
#endif /*DIAGPORT*/ /*<10>*/
|
|
#ifdef DIAGPORT
|
|
int diagloop; /*Used to show looping*/
|
|
#endif /*DIAGPORT*/
|
|
|
|
|
|
#define TICKRES 10 /*Our coarse timer resolution*/
|
|
#define ISABUSKHZ 8330 /*Number of IN/OUT ISA/sec*/
|
|
|
|
#ifndef FREE2
|
|
#define RAW_PART 2 /*Needs to be defined in 1.1.5.1*/
|
|
#endif /*FREE2*/
|
|
|
|
|
|
#define MATCDBLK 2048 /*Standard block size*/
|
|
#define MATCDRBLK 2352 /*Raw and/or DA block size*/
|
|
#define MATCD_RETRYS 5 /*Number of retries for read ops*/
|
|
#define MATCD_READ_1 0x80 /*Read state machine defines*/
|
|
#define MATCD_READ_2 0x90 /*Read state machine defines*/
|
|
|
|
struct matcd_volinfo {
|
|
unsigned char type; /*00 CD-DA or CD-ROM
|
|
10 CD-I
|
|
20 XA */
|
|
unsigned char trk_low; /*Normally 1*/
|
|
unsigned char trk_high; /*Highest track number*/
|
|
unsigned char vol_msf[3]; /*Size of disc in min/sec/frame*/
|
|
};
|
|
|
|
|
|
struct matcd_mbx {
|
|
short controller;
|
|
short ldrive;
|
|
short partition;
|
|
short port;
|
|
short retry;
|
|
short nblk;
|
|
int sz;
|
|
u_long skip;
|
|
struct buf *bp;
|
|
int p_offset;
|
|
short count;
|
|
};
|
|
|
|
|
|
struct matcd_data {
|
|
short config;
|
|
short drivemode; /*Last state drive was set to*/
|
|
short flags;
|
|
short status;
|
|
int blksize;
|
|
u_long disksize;
|
|
int iobase;
|
|
struct disklabel dlabel;
|
|
int partflags[MAXPARTITIONS];
|
|
int openflags;
|
|
struct matcd_volinfo volinfo;
|
|
short debug;
|
|
struct matcd_mbx mbx;
|
|
} matcd_data[TOTALDRIVES];
|
|
|
|
|
|
/* Bit equates for matcd_data.flags*/
|
|
|
|
#define MATCDINIT 0x0001 /*Probe ran on host adapter*/
|
|
#define MATCDLABEL 0x0004 /*Valid TOC exists*/
|
|
#define MATCDWARN 0x0020 /*Have reported an open disc change*/
|
|
|
|
|
|
/* Bit equates for matcd_data.partflags*/
|
|
|
|
#define MATCDOPEN 0x0001
|
|
#define MATCDREADRAW 0x0002
|
|
|
|
|
|
#define DELAY_STATUS 10000l /* 10000 * 1us */
|
|
#define DELAY_GETREPLY 200000l /* 200000 * 2us */
|
|
#define DELAY_SEEKREAD 20000l /* 20000 * 1us */
|
|
#define matcd_delay DELAY
|
|
|
|
|
|
|
|
/* Error classes returned by chk_error()*/
|
|
|
|
#define ERR_RETRY 1 /*A retry might recover this*/
|
|
#define ERR_INIT 2 /*A retry almost certainly will get this*/
|
|
#define ERR_FATAL 3 /*This cannot be recovered from*/
|
|
|
|
|
|
struct buf request_head[NUMCTRLRS]; /*A queue for each host interface*/
|
|
int nextcontroller=0; /*Number of interface units found*/
|
|
int drivepresent=0; /*Don't change this - see license*/
|
|
static struct matcd_mbx *mbxsave;
|
|
|
|
unsigned char if_state[4]={0,0,0,0}; /*State of the host I/F and buss*/
|
|
|
|
/* Flags in the if_state array
|
|
*/
|
|
|
|
#define BUSSBUSY 0x01 /*Buss is already busy*/
|
|
|
|
|
|
|
|
struct matcd_read2 {
|
|
unsigned char start_msf[3];
|
|
unsigned char end_msf[3];
|
|
};
|
|
|
|
/*---------------------------------------------------------------------------
|
|
These macros take apart the minor number and yield the
|
|
partition, drive on controller, and controller.
|
|
This must match the settings in /dev/MAKEDEV.
|
|
---------------------------------------------------------------------------*/
|
|
|
|
#define matcd_partition(dev) ((minor(dev)) & 0x07)
|
|
#define matcd_ldrive(dev) (((minor(dev)) & 0x78) >> 3)
|
|
#define matcd_cdrive(dev) (((minor(dev)) & 0x18) >> 3)
|
|
#define matcd_controller(dev) (((minor(dev)) & 0x60) >> 5)
|
|
|
|
|
|
#ifndef FREE2
|
|
/*---------------------------------------------------------------------------
|
|
This makes the long function names shorter for systems
|
|
using the older kernel config program
|
|
---------------------------------------------------------------------------*/
|
|
#define matcdopen matopen /*<8>*/
|
|
#define matcdclose matclose /*<8>*/
|
|
#define matcdstrategy matstrategy /*<8>*/
|
|
#define matcdioctl matioctl /*<8>*/
|
|
#define matcdsize matsize /*<8>*/
|
|
#define matcddriver matdriver /*<10>*/
|
|
#endif /*FREE2*/
|
|
|
|
|
|
/*---------------------------------------------------------------------------
|
|
Entry points and other connections to/from kernel - see conf.c
|
|
---------------------------------------------------------------------------*/
|
|
|
|
int matcdopen(dev_t dev);
|
|
int matcdclose(dev_t dev);
|
|
void matcdstrategy(struct buf *bp);
|
|
int matcdioctl(dev_t dev, int command, caddr_t addr, int flags);
|
|
int matcdsize(dev_t dev);
|
|
extern int hz;
|
|
extern int matcd_probe(struct isa_device *dev);
|
|
extern int matcd_attach(struct isa_device *dev);
|
|
struct isa_driver matcddriver={matcd_probe, matcd_attach,
|
|
"matcd interface "};
|
|
|
|
|
|
/*---------------------------------------------------------------------------
|
|
Internal function declarations
|
|
---------------------------------------------------------------------------*/
|
|
|
|
static int matcd_getdisklabel(int ldrive);
|
|
static void matcd_start(struct buf *dp);
|
|
static void zero_cmd(char *);
|
|
static void matcd_pread(int port, int count, unsigned char * data);
|
|
static int matcd_fastcmd(int port,int ldrive,int cdrive,
|
|
unsigned char * cp);
|
|
static void matcd_slowcmd(int port,int ldrive,int cdrive,
|
|
unsigned char * cp);
|
|
static int matcd_getstat(int ldrive, int sflg);
|
|
static void matcd_setflags(int ldrive, struct matcd_data *cd);
|
|
static int msf2hsg(unsigned char *msf);
|
|
static void matcd_blockread(int state);
|
|
static int matcd_getreply(int ldrive, int dly);
|
|
static void selectdrive(int port,int drive);
|
|
static void doreset(int port,int cdrive);
|
|
static int doprobe(int port,int cdrive);
|
|
static void watchdog(int state, char * foo);
|
|
static void lockbuss(int controller, int ldrive);
|
|
static void unlockbuss(int controller, int ldrive);
|
|
static int matcd_volinfo(int ldrive);
|
|
static void draincmd(int port,int cdrive,int ldrive);
|
|
static int get_error(int port, int ldrive, int cdrive);
|
|
static int chk_error(int errnum);
|
|
static int msf_to_blk(unsigned char * cd);
|
|
int docmd(char *cmd, int ldrive, int cdrive, int controller,
|
|
int port);
|
|
int get_stat(int port, int ldrive);
|
|
int matcd_eject(int ldrive, int cdrive, int controller);
|
|
int media_chk(struct matcd_data *cd, int errnum, int ldrive);
|
|
int waitforit(int timelimit, int state, int port, char *where);
|
|
#ifdef FULLDRIVER
|
|
static int matcd_playtracks(int ldrive, int cdrive, int controller,
|
|
struct ioc_play_track *pt);
|
|
static int matcd_playmsf(int ldrive, int cdrive, int controller,
|
|
struct ioc_play_msf *pt);
|
|
static int matcd_pause(int ldrive, int cdrive, int controller,
|
|
struct ioc_play_msf * addr,int action);
|
|
static int matcd_stop(int ldrive, int cdrive, int controller,
|
|
struct ioc_play_msf * addr);
|
|
#endif /*FULLDRIVER*/
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcdopen - Open the device
|
|
|
|
This routine actually gets called every time anybody opens
|
|
any partition on a drive. But the first call is the one that
|
|
does all the work.
|
|
|
|
If you #define LOCKDRIVE, the drive eject button will be ignored
|
|
while any partition on the drive is open.
|
|
----------------------------------------------------------------------*/
|
|
int matcdopen(dev_t dev)
|
|
{
|
|
int cdrive,ldrive,partition,controller;
|
|
struct matcd_data *cd;
|
|
int i,z,port;
|
|
unsigned char cmd[MAXCMDSIZ];
|
|
|
|
#if DIAGPORT == 0x302 /*<10>*/
|
|
DIAGOUT(0x300,0x00); /*<10>Init diag board in case some
|
|
other device probe scrambled it*/
|
|
#endif /*<10>DIAGPORT*/
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0x10); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
ldrive=matcd_ldrive(dev);
|
|
cdrive=matcd_cdrive(dev);
|
|
partition=matcd_partition(dev);
|
|
controller=matcd_controller(dev);
|
|
cd= &matcd_data[ldrive];
|
|
port=cd->iobase; /*and port#*/
|
|
|
|
if (ldrive >= TOTALDRIVES) return(ENXIO);
|
|
|
|
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d: Open: dev %x partition %x controller %x flags %x cdrive %x\n",
|
|
ldrive,dev,partition,controller,cd->flags,matcd_cdrive(dev));
|
|
#endif /*DEBUGOPEN*/
|
|
|
|
if (!(cd->flags & MATCDINIT)) { /*Did probe find this drive*/
|
|
return(ENXIO);
|
|
}
|
|
|
|
if (!(cd->flags & MATCDLABEL) &&
|
|
cd->openflags) { /*Has drive completely closed?*/
|
|
return(ENXIO); /*No, all partitions must close*/
|
|
}
|
|
|
|
|
|
/* Now, test to see if the media is ready
|
|
*/
|
|
|
|
lockbuss(controller,ldrive);
|
|
zero_cmd(cmd);
|
|
cmd[0]=NOP; /*Test drive*/
|
|
matcd_slowcmd(port,ldrive,cdrive,cmd);
|
|
i=waitforit(10*TICKRES,DTEN,port,"matcdopen");
|
|
z=get_stat(port,ldrive); /*Read and toss status byte*/
|
|
unlockbuss(controller, ldrive); /*Release buss lock*/
|
|
if ((z & MATCD_ST_DSKIN)==0) { /*Is there a disc in the drive?*/
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d: No Disc in open\n",ldrive);
|
|
#endif /*DEBUGOPEN*/
|
|
return(ENXIO);
|
|
}
|
|
if (z & MATCD_ST_ERROR) { /*Was there an error*/
|
|
i=get_error(port,ldrive,cdrive); /*Find out what it was*/
|
|
if (cd->openflags) { /*Any parts open?*/
|
|
if (media_chk(cd,i,ldrive)) { /*Was it a disc chg?*/
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d: Disc change detected i %x z %x\n",
|
|
ldrive,i,z);
|
|
#endif /*DEBUGOPEN*/
|
|
return(ENOTTY);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Here we fill in the disklabel structure although most is
|
|
hardcoded.
|
|
*/
|
|
|
|
if ((cd->flags & MATCDLABEL)==0) {
|
|
bzero(&cd->dlabel,sizeof(struct disklabel));
|
|
|
|
|
|
/* Now we query the drive for the actual size of the media.
|
|
This is where we find out of there is any media or if the
|
|
media isn't a Mode 1 or Mode 2/XA disc.
|
|
See version information about Mode 2/XA support.
|
|
*/
|
|
lockbuss(controller,ldrive);
|
|
i=matcdsize(dev);
|
|
unlockbuss(controller, ldrive); /*Release buss lock*/
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d: Buss unlocked in open\n",ldrive);
|
|
#endif /*DEBUGOPEN*/
|
|
if (i < 0) {
|
|
printf("matcd%d: Could not read the disc size\n",ldrive);
|
|
return(ENXIO);
|
|
} /*matcdsize filled in rest of dlabel*/
|
|
|
|
/* Based on the results, fill in the variable entries in the disklabel
|
|
*/
|
|
cd->dlabel.d_secsize=cd->blksize;
|
|
cd->dlabel.d_ncylinders=(cd->disksize/100)+1;
|
|
cd->dlabel.d_secperunit=cd->disksize;
|
|
cd->dlabel.d_partitions[0].p_size=cd->disksize;
|
|
cd->dlabel.d_checksum=dkcksum(&cd->dlabel);
|
|
|
|
|
|
/* Now fill in the hardcoded section
|
|
*/
|
|
/*123456789012345678*/
|
|
strncpy(cd->dlabel.d_typename,"Matsushita CDR ",16);
|
|
strncpy(cd->dlabel.d_packname,"(c) 1994, fdiv ",16);
|
|
cd->dlabel.d_magic=DISKMAGIC;
|
|
cd->dlabel.d_magic2=DISKMAGIC;
|
|
cd->dlabel.d_nsectors=100;
|
|
cd->dlabel.d_secpercyl=100;
|
|
cd->dlabel.d_ntracks=1;
|
|
cd->dlabel.d_interleave=1;
|
|
cd->dlabel.d_rpm=300;
|
|
cd->dlabel.d_npartitions=1; /*See note below*/
|
|
cd->dlabel.d_partitions[0].p_offset=0;
|
|
cd->dlabel.d_partitions[0].p_fstype=9;
|
|
cd->dlabel.d_flags=D_REMOVABLE;
|
|
|
|
/* I originally considered allowing the partition match tracks or
|
|
sessions on the media, but since you are allowed up to 99
|
|
tracks in the RedBook world, this would not fit in with the
|
|
BSD fixed partition count scheme. So ioctls are used to shift
|
|
the track to be accessed into partition 1.
|
|
*/
|
|
|
|
cd->flags |= MATCDLABEL; /*Mark drive as having TOC*/
|
|
}
|
|
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d open2: partition=%d disksize=%d blksize=%x flags=%x\n",
|
|
ldrive,partition,cd->disksize,cd->blksize,cd->flags);
|
|
#endif /*DEBUGOPEN*/
|
|
|
|
#ifdef LOCKDRIVE
|
|
if (cd->openflags==0) {
|
|
lockbuss(controller,ldrive);
|
|
zero_cmd(cmd);
|
|
cmd[0]=LOCK; /*Lock drive*/
|
|
cmd[1]=1;
|
|
matcd_slowcmd(port,ldrive,cdrive,cmd);
|
|
i=waitforit(10*TICKRES,DTEN,port,"matcdopen");
|
|
z=get_stat(port,ldrive);/*Read and toss status byte*/
|
|
unlockbuss(controller, ldrive); /*Release buss lock*/
|
|
}
|
|
#endif /*LOCKDRIVE*/
|
|
cd->openflags |= (1<<partition);/*Mark partition open*/
|
|
|
|
if (partition==RAW_PART ||
|
|
(partition < cd->dlabel.d_npartitions &&
|
|
cd->dlabel.d_partitions[partition].p_fstype != FS_UNUSED)) {
|
|
cd->partflags[partition] |= MATCDOPEN;
|
|
if (partition == RAW_PART) {
|
|
cd->partflags[partition] |= MATCDREADRAW;
|
|
}
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d: Open is complete\n",ldrive);
|
|
#endif /*DEBUGOPEN*/
|
|
return(0);
|
|
}
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d: Open FAILED\n",ldrive);
|
|
#endif /*DEBUGOPEN*/
|
|
return(ENXIO);
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcdclose - Close the device
|
|
|
|
Depending on how you compiled the driver, close may not
|
|
do much other than clear some driver settings.
|
|
Note that audio playback will continue.
|
|
|
|
If you did #define LOCKDRIVE, the drive was locked when the
|
|
matcdopen call is done. If we did that, then we unlock the
|
|
drive now.
|
|
----------------------------------------------------------------------*/
|
|
|
|
int matcdclose(dev_t dev)
|
|
{
|
|
int ldrive,cdrive,port,partition,controller,i,z;
|
|
struct matcd_data *cd;
|
|
unsigned char cmd[MAXCMDSIZ];
|
|
|
|
ldrive = matcd_ldrive(dev);
|
|
cdrive=matcd_cdrive(dev);
|
|
cd=matcd_data + ldrive;
|
|
port=cd->iobase; /*and port#*/
|
|
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0x20); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
if (ldrive >= TOTALDRIVES)
|
|
return(ENXIO);
|
|
|
|
partition = matcd_partition(dev);
|
|
controller=matcd_controller(dev);
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d: Close partition=%d\n", ldrive, partition);
|
|
#endif /*DEBUGOPEN*/
|
|
|
|
if (!(cd->flags & MATCDINIT))
|
|
return(ENXIO);
|
|
|
|
cd->partflags[partition] &= ~(MATCDOPEN|MATCDREADRAW);
|
|
cd->openflags &= ~(1<<partition);
|
|
#ifdef LOCKDRIVE
|
|
if (cd->openflags==0) {
|
|
lockbuss(controller,ldrive);
|
|
zero_cmd(cmd);
|
|
cmd[0]=LOCK; /*Unlock drive*/
|
|
matcd_slowcmd(port,ldrive,cdrive,cmd);
|
|
i=waitforit(10*TICKRES,DTEN,port,"matcdopen");
|
|
z=get_stat(port,ldrive);/*Read and toss status byte*/
|
|
unlockbuss(controller, ldrive); /*Release buss lock*/
|
|
}
|
|
#endif /*LOCKDRIVE*/
|
|
cd->flags &= ~MATCDWARN; /*Clear any warning flag*/
|
|
return(0);
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcdstrategy - Accepts I/O requests from kernel for processing
|
|
|
|
This routine accepts a read request block pointer (historically
|
|
but somewhat inaccurately called *bp for buffer pointer).
|
|
Various sanity checks are performed on the request.
|
|
When we are happy with the request and the state of the device,
|
|
the request is added to the queue of requests for the controller
|
|
that the drive is connected to. We support multiple controllers
|
|
so there are multiple queues. Once the request is added, we
|
|
call the matcd_start routine to start the device in case it isn't
|
|
doing something already. All I/O including ioctl requests
|
|
rely on the current request starting the next one before exiting.
|
|
----------------------------------------------------------------------*/
|
|
|
|
void matcdstrategy(struct buf *bp)
|
|
{
|
|
struct matcd_data *cd;
|
|
struct buf *dp;
|
|
int s;
|
|
int ldrive,controller;
|
|
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0x30); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
ldrive=matcd_ldrive(bp->b_dev);
|
|
controller=matcd_controller(bp->b_dev);
|
|
cd= &matcd_data[ldrive];
|
|
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: Strategy: buf=0x%lx, block#=%ld bcount=%ld\n",
|
|
ldrive,bp,bp->b_blkno,bp->b_bcount);
|
|
#endif /*DEBUGIO*/
|
|
|
|
|
|
if (ldrive >= TOTALDRIVES || bp->b_blkno < 0) {
|
|
printf("matcd%d: Bogus parameters received - kernel may be corrupted\n",ldrive);
|
|
bp->b_error=EINVAL;
|
|
bp->b_flags|=B_ERROR;
|
|
goto bad;
|
|
}
|
|
|
|
if (!(cd->flags & MATCDLABEL)) {
|
|
bp->b_error = EIO;
|
|
goto bad;
|
|
}
|
|
|
|
if (!(bp->b_flags & B_READ)) {
|
|
bp->b_error = EROFS;
|
|
goto bad;
|
|
}
|
|
|
|
if (bp->b_bcount==0) /*Request is zero-length - all done*/
|
|
goto done;
|
|
|
|
if (matcd_partition(bp->b_dev) != RAW_PART) {
|
|
if (!(cd->flags & MATCDLABEL)) {
|
|
bp->b_error = EIO;
|
|
goto bad;
|
|
}
|
|
if (bounds_check_with_label(bp,&cd->dlabel,1) <= 0) {
|
|
goto done;
|
|
}
|
|
} else {
|
|
bp->b_pblkno=bp->b_blkno;
|
|
bp->b_resid=0;
|
|
}
|
|
|
|
s=splbio(); /*Make sure we don't get intr'ed*/
|
|
dp=&request_head[controller]; /*Pointer to controller queue*/
|
|
disksort(dp,bp); /*Add new request (bp) to queue (dp
|
|
and sort the requests in a way that
|
|
may not be ideal for CD-ROM media*/
|
|
|
|
#ifdef DEBUGQUEUE
|
|
printf("matcd%d: Dump BP chain: -------\n",ldrive);
|
|
while (bp) {
|
|
printf("Block %d\n",bp->b_pblkno);
|
|
#ifdef FREE2
|
|
bp=bp->b_actf;
|
|
#else /*FREE2*/
|
|
bp=bp->av_forw;
|
|
#endif /*FREE2*/
|
|
}
|
|
printf("matcd%d: ---------------------\n",ldrive);
|
|
#endif /*DEBUGQUEUE*/
|
|
|
|
matcd_start(dp); /*Ok, with our newly sorted queue,
|
|
see if we can start an I/O operation
|
|
right now*/
|
|
splx(s); /*Return priorities to normal*/
|
|
return; /*All done*/
|
|
|
|
bad: bp->b_flags |= B_ERROR; /*Request bad in some way*/
|
|
done: bp->b_resid = bp->b_bcount; /*Show un read amount*/
|
|
biodone(bp); /*Signal we have done all we plan to*/
|
|
return;
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcd_start - Pull a request from the queue and consider doing it.
|
|
----------------------------------------------------------------------*/
|
|
|
|
static void matcd_start(struct buf *dp)
|
|
{
|
|
struct matcd_data *cd;
|
|
struct buf *bp;
|
|
struct partition *p;
|
|
int part,ldrive,controller;
|
|
register s;
|
|
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0x40); /*Show where we are*/
|
|
diagloop=0;
|
|
#endif /*DIAGPORT*/
|
|
if ((bp=dp->b_actf) == NULL) { /*Nothing on read queue to do?*/
|
|
wakeup((caddr_t)&matcd_data->status); /*Wakeup any blocked*/
|
|
return; /* opens, ioctls, etc*/
|
|
}
|
|
|
|
ldrive=matcd_ldrive(bp->b_dev); /*Get logical drive#*/
|
|
cd=&matcd_data[ldrive]; /*Get pointer to data for this drive*/
|
|
controller=matcd_controller(bp->b_dev); /*Also get interface #*/
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: In start controller %d\n",ldrive,controller);
|
|
#endif /*DEBUGIO*/
|
|
|
|
if (if_state[controller] & BUSSBUSY) {
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: Dropping thread in start, controller %d\n",
|
|
ldrive,controller);
|
|
#endif /*DEBUGIO*/
|
|
return;
|
|
}
|
|
|
|
#ifdef FREE2
|
|
dp->b_actf = bp->b_actf;
|
|
#else /*FREE2*/
|
|
dp->b_actf = bp->av_forw; /*Get next request from queue*/
|
|
#endif /*FREE2*/
|
|
|
|
part=matcd_partition(bp->b_dev);
|
|
p=cd->dlabel.d_partitions + part;
|
|
|
|
if_state[controller] |= BUSSBUSY;/*Mark buss as busy*/
|
|
cd->mbx.ldrive=ldrive; /*Save current logical drive*/
|
|
cd->mbx.controller=controller; /*and controller*/
|
|
cd->mbx.partition=part; /*and partition (2048 vs 2532)*/
|
|
cd->mbx.port=cd->iobase; /*and port#*/
|
|
cd->mbx.retry=MATCD_RETRYS; /*and the retry count*/
|
|
cd->mbx.bp=bp; /*and the bp*/
|
|
cd->mbx.p_offset=p->p_offset; /*and where the data will go*/
|
|
matcd_blockread(MATCD_READ_1+ldrive); /*Actually start the read*/
|
|
return; /*Dropping thread. matcd_blockread
|
|
must have scheduled a timeout or
|
|
we will go to sleep forever*/
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcdioctl - Process things that aren't block reads
|
|
|
|
In this driver, ioctls are used mainly to change
|
|
the mode the drive is running in, play audio and other
|
|
things that don't fit into the block read scheme of things.
|
|
----------------------------------------------------------------------*/
|
|
|
|
int matcdioctl(dev_t dev, int command, caddr_t addr, int flags)
|
|
{
|
|
struct matcd_data *cd;
|
|
int ldrive,cdrive,partition;
|
|
int i,z;
|
|
unsigned char * p;
|
|
int port, controller;
|
|
unsigned char zz;
|
|
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0x50); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
ldrive=matcd_ldrive(dev);
|
|
cdrive=matcd_cdrive(dev);
|
|
partition=matcd_partition(dev);
|
|
controller=ldrive>>2;
|
|
cd = &matcd_data[ldrive];
|
|
port=cd->iobase;
|
|
|
|
#ifdef DEBUGIOCTL
|
|
printf("matcd%d: ioctl %x cdrive %x parms ",ldrive,command,cdrive);
|
|
for (i=0;i<10;i++) {
|
|
zz=addr[i];
|
|
printf("%02x ",zz);
|
|
}
|
|
printf(" flags %x\n",cd->flags);
|
|
#endif /*DEBUGIOCTL*/
|
|
|
|
if (!(cd->flags & MATCDLABEL)) /*Did we read TOC OK?*/
|
|
return(EIO);
|
|
|
|
switch(command) {
|
|
case DIOCSBAD: /*<9>*/
|
|
return(EINVAL); /*<9>*/
|
|
case DIOCGDINFO: /*<9>*/
|
|
*(struct disklabel *) addr = cd->dlabel; /*<9>*/
|
|
return(0); /*<9>*/
|
|
case DIOCGPART: /*<9>*/
|
|
((struct partinfo *) addr)->disklab=&cd->dlabel;/*<9>*/
|
|
((struct partinfo *) addr)->part= /*<9>*/
|
|
&cd->dlabel.d_partitions[matcd_partition(dev)];/*<9>*/
|
|
return(0); /*<9>*/
|
|
case DIOCWDINFO: /*<9>*/
|
|
case DIOCSDINFO: /*<9>*/
|
|
#ifdef FREE2 /*<10>*/
|
|
if ((flags & FWRITE) == 0) { /*<9>*/
|
|
return(EBADF); /*<9>*/
|
|
} /*<9>*/
|
|
else { /*<9>*/
|
|
return setdisklabel(&cd->dlabel, /*<9>*/
|
|
(struct disklabel *) addr, 0);/*<9>*/
|
|
} /*<9>*/
|
|
#endif /*<10>FREE2*/
|
|
case DIOCWLABEL: /*<9>*/
|
|
return(EBADF); /*<9>*/
|
|
case CDIOCEJECT:
|
|
return(matcd_eject(ldrive, cdrive, controller));
|
|
#ifdef FULLDRIVER
|
|
case CDIOCPLAYTRACKS:
|
|
return(matcd_playtracks(ldrive, cdrive, controller,
|
|
(struct ioc_play_track *) addr));
|
|
case CDIOCPLAYMSF:
|
|
return(matcd_playmsf(ldrive, cdrive, controller,
|
|
(struct ioc_play_msf *) addr));
|
|
case CDIOCRESUME:
|
|
return(matcd_pause(ldrive, cdrive, controller,
|
|
(struct ioc_play_msf *) addr,RESUME));
|
|
case CDIOCPAUSE:
|
|
return(matcd_pause(ldrive, cdrive, controller,
|
|
(struct ioc_play_msf *) addr,0));
|
|
case CDIOCSTOP:
|
|
return(matcd_stop(ldrive, cdrive, controller,
|
|
(struct ioc_play_msf *) addr));
|
|
|
|
case CDIOCGETVOL:
|
|
case CDIOCSETVOL:
|
|
case CDIOCSETMONO:
|
|
case CDIOCSETSTERIO:
|
|
case CDIOCSETMUTE:
|
|
case CDIOCSETLEFT:
|
|
case CDIOCSETRIGHT:
|
|
#endif /*FULLDRIVER*/
|
|
|
|
case CDIOCREADSUBCHANNEL:
|
|
case CDIOREADTOCHEADER:
|
|
case CDIOREADTOCENTRYS:
|
|
|
|
case CDIOCSETPATCH:
|
|
case CDIOCSTART:
|
|
case CDIOCRESET:
|
|
return(EINVAL);
|
|
default:
|
|
return(ENOTTY);
|
|
}
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcdsize - Reports how many blocks exist on the disc.
|
|
----------------------------------------------------------------------*/
|
|
|
|
int matcdsize(dev_t dev)
|
|
{
|
|
int size,blksize;
|
|
int ldrive,part;
|
|
struct matcd_data *cd;
|
|
|
|
ldrive=matcd_ldrive(dev);
|
|
part=matcd_partition(dev);
|
|
if (part==RAW_PART)
|
|
blksize=MATCDRBLK; /*2353*/
|
|
else
|
|
blksize=MATCDBLK; /*2048*/
|
|
|
|
cd = &matcd_data[ldrive];
|
|
|
|
if (matcd_volinfo(ldrive) >= 0) {
|
|
cd->blksize=blksize;
|
|
size=msf_to_blk((char * )&cd->volinfo.vol_msf);
|
|
|
|
cd->disksize=size*(blksize/DEV_BSIZE);
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d: Media size %d\n",ldrive,size);
|
|
#endif /*DEBUGOPEN*/
|
|
return(0);
|
|
}
|
|
return(-1);
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcd_probe - Search for host interface/adapters
|
|
|
|
The probe routine hunts for the first drive on the interface since
|
|
there is no way to locate just the adapter. It also resets the
|
|
entire drive chain while it is there. matcd_attach() takes care of
|
|
the rest of the initialization.
|
|
|
|
The probe routine can be compiled two ways. In AUTOHUNT mode,
|
|
the kernel config file can say "port?" and we will check all ports
|
|
listed in the port_hint array (see above).
|
|
|
|
Without AUTOHUNT set, the config file must list a specific port
|
|
address to check.
|
|
|
|
Note that specifying the explicit addresses makes boot-up a lot
|
|
faster.
|
|
|
|
The probe will locate Panasonic/Creative interface on the following
|
|
Creative adapter boards:
|
|
#1730 Sound Blaster 16
|
|
#1740 Sound Blaster 16 (cost reduced)
|
|
#1810 omniCD upgrade kit adapter card (stand-alone CD)
|
|
#3100 PhoneBlaster SB16 + Sierra 14.4K modem combo
|
|
Creative releases a newer and cheaper-to-make Sound Blaster
|
|
board every few months, so by the original release date of this
|
|
software, there are probably 8 different board models called
|
|
Sound Blaster 16. These include "Vibra", "Value", etc.
|
|
|
|
Please report additional part numbers and board descriptions
|
|
and new port numbers that work to the author.
|
|
|
|
----------------------------------------------------------------------*/
|
|
|
|
int matcd_probe(struct isa_device *dev)
|
|
{
|
|
int i,cdrive;
|
|
unsigned char y,z,drive;
|
|
int level;
|
|
int port = dev->id_iobase; /*Take port hint from config file*/
|
|
cdrive=nextcontroller; /*Controller defined by pass for now*/
|
|
|
|
#if DIAGPORT == 0x302 /*<10>*/
|
|
DIAGOUT(0x300,0x00); /*<10>Init diag board in case some
|
|
other device probe scrambled it*/
|
|
#endif /*<10>DIAGPORT*/
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0x60); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
if (nextcontroller==NUMCTRLRS) {
|
|
printf("matcdc%d: - Too many interfaces specified in config\n",
|
|
nextcontroller);
|
|
return(0);
|
|
}
|
|
if (nextcontroller==0) { /*Very first time to be called*/
|
|
for (i=0; i<TOTALDRIVES; i++) {
|
|
matcd_data[i].drivemode=MODE_UNKNOWN;
|
|
matcd_data[i].flags=0;
|
|
}
|
|
}
|
|
|
|
i=nextcontroller*DRIVESPERC; /*Precompute controller offset*/
|
|
for (y=0; y<DRIVESPERC; y++) {
|
|
matcd_data[i+y].flags=0;
|
|
matcd_data[i+y].config=0;
|
|
}
|
|
|
|
#ifdef DEBUGPROBE
|
|
printf("matcdc%d: In probe i %d y %d port %x\n",
|
|
nextcontroller,i,y,port);
|
|
#endif /*DEBUGPROBE*/
|
|
#ifdef AUTOHUNT
|
|
#ifdef DEBUGPROBE
|
|
printf("matcd%d: size of port_hints %d\n",
|
|
nextcontroller,sizeof(port_hints));
|
|
#endif /*DEBUGPROBE*/
|
|
if (port==-1) {
|
|
for(i=0;i<(sizeof(port_hints)/sizeof(short));i++) {
|
|
port=port_hints[i];
|
|
#ifdef DEBUGPROBE
|
|
printf("matcdc%d: Port hint %x\n",nextcontroller,port);
|
|
#endif /*DEBUGPROBE*/
|
|
if (port==-1) {
|
|
dev->id_iobase=-1; /*Put port ? back*/
|
|
return(0);/*Nothing left to try*/
|
|
}
|
|
if (port!=0) { /*Unused port found*/
|
|
dev->id_iobase=port;
|
|
port_hints[i]=0;/*Don't use that port again*/
|
|
if (doprobe(port,cdrive)==0) return(NUMPORTS);
|
|
}
|
|
}
|
|
dev->id_iobase=-1; /*Put port ? back as it was*/
|
|
return(0); /*Interface not found*/
|
|
|
|
} else { /*Config specified a port*/
|
|
i=0; /*so eliminate it from the hint list*/
|
|
for(i=0;;i++) { /*or we might try to assign it again*/
|
|
if (port_hints[i]== -1) break; /*End of list*/
|
|
if (port_hints[i]==port) {
|
|
port_hints[i]=0; /*Clear duplicate*/
|
|
break;
|
|
}
|
|
}
|
|
if (doprobe(port,cdrive)==0) return(NUMPORTS);
|
|
else return(0);
|
|
}
|
|
#else /*AUTOHUNT*/
|
|
if (port==-1) {
|
|
printf("matcd%d: AUTOHUNT disabled but port? specified in config\n",
|
|
nextcontroller);
|
|
return(0);
|
|
}
|
|
if (doprobe(port,cdrive)==0) return(NUMPORTS);
|
|
else return(0);
|
|
#endif /*AUTOHUNT*/
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
doprobe - Common probe code that actually checks the ports we
|
|
have decided to test.
|
|
----------------------------------------------------------------------*/
|
|
|
|
int doprobe(int port,int cdrive)
|
|
{
|
|
unsigned char cmd[MAXCMDSIZ];
|
|
|
|
#ifdef RESETONBOOT
|
|
doreset(port,cdrive); /*Reset what might be our device*/
|
|
#endif /*RESETONBOOT*/
|
|
|
|
zero_cmd(cmd);
|
|
cmd[0]=NOP; /*A reasonably harmless command.
|
|
This command will fail after
|
|
power-up or after reset. That's OK*/
|
|
if (matcd_fastcmd(port,0,0,cmd)==0) {/*Issue command*/
|
|
inb(port+CMD); /*Read status byte*/
|
|
#ifdef DEBUGPROBE
|
|
printf("matcdc%d: Probe found something\n",nextcontroller);
|
|
#endif /*DEBUGPROBE*/
|
|
if (drivepresent==0) { /*Don't change this - see license*/
|
|
printf("matcd - Matsushita (Panasonic) CD-ROM Driver by FDIV, %s\n",MATCDVERSION);
|
|
/*Don't change this - see license*/
|
|
drivepresent++; /*Don't change this - see license*/
|
|
} /*Don't change this - see license*/
|
|
return(0); /*Drive 0 detected*/
|
|
}
|
|
#ifdef DEBUGPROBE
|
|
printf("matcdc%d: Probe DID NOT find something\n",nextcontroller);
|
|
#endif /*DEBUGPROBE*/
|
|
return(1); /*Nothing detected*/
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcd_attach - Locates drives on the adapters that were located.
|
|
If we got here, we located a interface and at least one
|
|
drive. Now we figure out how many drives are under that
|
|
interface. The Panasonic interface is too simple to call
|
|
it a controller, but in the existing PDP model, that is
|
|
what it would be.
|
|
----------------------------------------------------------------------*/
|
|
|
|
int matcd_attach(struct isa_device *dev)
|
|
{
|
|
int i;
|
|
unsigned char y,z,cdrive;
|
|
int level;
|
|
unsigned char cmd[MAXCMDSIZ];
|
|
unsigned char data[12];
|
|
struct matcd_data *cd;
|
|
int port = dev->id_iobase; /*Take port ID selected in probe()*/
|
|
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0x70); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
#ifdef DEBUGPROBE
|
|
printf("matcdc: Attach dev %x id_unit %d\n",dev,dev->id_unit);
|
|
#endif /*DEBUGPROBE*/
|
|
for (cdrive=0; cdrive<4; cdrive++) { /*We're hunting drives...*/
|
|
zero_cmd(cmd);
|
|
cmd[0]=NOP; /*A reasonably harmless command.
|
|
This command will fail after
|
|
power-up or after reset. It's OK*/
|
|
i=cdrive+(DRIVESPERC*nextcontroller);
|
|
if (matcd_fastcmd(port,i,cdrive,cmd)==0) { /*Issue command*/
|
|
z=get_stat(port,cdrive);/*Read and toss status byte*/
|
|
if ((z & MATCD_ST_ERROR)) { /*If there was an error,
|
|
we must ask for error info
|
|
or subsequent cmds fail*/
|
|
zero_cmd(cmd);
|
|
cmd[0]=READERROR; /*Inquire*/
|
|
matcd_fastcmd(port,i,cdrive,cmd);
|
|
matcd_pread(port,8,data);/*Read data returned*/
|
|
z=get_stat(port,i);/*Read and toss status byte*/
|
|
#ifdef DEBUGPROBE
|
|
printf("matcd%d: Status byte %x ",i,z);
|
|
#endif /*DEBUGPROBE*/
|
|
}
|
|
zero_cmd(cmd);
|
|
cmd[0]=READID; /*Get drive ID*/
|
|
matcd_fastcmd(port,i,cdrive,cmd);
|
|
matcd_pread(port,10,data);/*Read Drive Parm*/
|
|
z=get_stat(port,i); /*Read and toss status byte*/
|
|
data[10]=0; /*Build ASCIZ string*/
|
|
printf("matcd%d: [%s] ",i,data);
|
|
cd=&matcd_data[i];
|
|
cd->flags |= MATCDINIT;
|
|
cd->iobase=dev->id_iobase;
|
|
cd->openflags=0;
|
|
for (i=0; i<MAXPARTITIONS; i++) {
|
|
cd->partflags[i]=0;
|
|
}
|
|
}
|
|
}
|
|
nextcontroller++; /*Bump ctlr assign to next number*/
|
|
printf("\n"); /*End line of drive reports*/
|
|
return(1);
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
zero_cmd - Initialize command buffer
|
|
----------------------------------------------------------------------*/
|
|
|
|
void zero_cmd(char * lcmd)
|
|
{
|
|
int i;
|
|
for (i=0; i<MAXCMDSIZ; lcmd[i++]=0);
|
|
return;
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
doreset - Resets all the drives connected to a interface
|
|
----------------------------------------------------------------------*/
|
|
|
|
void doreset(int port,int cdrive)
|
|
{
|
|
register int i,z;
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0x80); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
outb(port+RESET,0); /*Reset what might be our device*/
|
|
/*Although this ensures a known
|
|
state, it does close the drive
|
|
door (if open) and aborts any
|
|
audio playback in progress. */
|
|
for (i=0;i<(125*ISABUSKHZ);i++){/*DELAY 500msec minimum. Worst
|
|
case is door open and none or
|
|
unreadable media */
|
|
z=inb(port+CMD); /*This makes the loop run at a
|
|
known speed. This value is ok
|
|
for 8.33MHz bus*/
|
|
}
|
|
for (i=0;i<4;i++) {
|
|
matcd_data[(cdrive*4)+i].drivemode=MODE_UNKNOWN;
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcd_fastcmd - Send a command to a drive
|
|
|
|
This routine executed commands that return instantly (or reasonably
|
|
quick), such as RESET, NOP, READ ERROR, etc. The only difference
|
|
between it and handling for slower commands, is the slower commands
|
|
will invoke a timeout/sleep if they don't get an instant response.
|
|
|
|
Fastcmd is mainly used in probe(), attach() and error related
|
|
functions. Every attempt should be made to NOT use this
|
|
function for any command that might be executed when the system
|
|
is up.
|
|
----------------------------------------------------------------------*/
|
|
|
|
int matcd_fastcmd(int port,int ldrive,int cdrive,unsigned char * cp)
|
|
{
|
|
unsigned int i;
|
|
unsigned char z;
|
|
int level;
|
|
#ifdef DEBUGCMD
|
|
unsigned char *cx;
|
|
#endif /*DEBUGCMD*/
|
|
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0x90); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
|
|
|
|
draincmd(port,cdrive,ldrive); /*Make sure buss is really idle*/
|
|
#ifdef DEBUGCMD
|
|
cx=cp;
|
|
printf("matcd%d: Fast Send port %x sel %d command %x %x %x %x %x %x %x\n",
|
|
ldrive,port,cdrive,cx[0],cx[1],cx[2],cx[3],cx[4],cx[5],cx[6]);
|
|
#endif /*DEBUGCMD*/
|
|
selectdrive(port,cdrive); /*Enable the desired target drive*/
|
|
level=splhigh(); /*----------------------------------------*/
|
|
for (i=0; i<7; i++) { /*The seven bytes of the command*/
|
|
outb(port+CMD,*cp++); /*must be sent within 10msec or*/
|
|
} /*the drive will ignore the cmd*/
|
|
splx(level); /*------------------------------------------------*/
|
|
|
|
/* Now we wait a maximum of 240msec for a response.
|
|
Only in a few rare cases does it take this long.
|
|
If it is longer, the command should probably be slept on
|
|
rather than increasing the timing value
|
|
*/
|
|
|
|
for (i=0; i<(60*ISABUSKHZ); i++) {
|
|
z = (inb(port+STATUS)) & (DTEN|STEN);
|
|
if (z != (DTEN|STEN)) break;
|
|
}
|
|
|
|
/* We are now either in a data or status phase, OR we timed-out.*/
|
|
|
|
if (z == (DTEN|STEN)) {
|
|
#ifdef DEBUGCMD
|
|
printf("matcd%d: Command time-out\n",ldrive);
|
|
#endif /*DEBUGCMD*/
|
|
return(-1);
|
|
}
|
|
if (z != DTEN) {
|
|
return(1);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcd_slowcmd - Issue a command to the drive
|
|
|
|
This routine is for commands that might take a long time, such
|
|
as a read or seek. The caller must determine if the command
|
|
completes instantly or schedule a poll later on.
|
|
----------------------------------------------------------------------*/
|
|
|
|
void matcd_slowcmd(int port,int ldrive,int cdrive,unsigned char * cp)
|
|
{
|
|
unsigned int i;
|
|
unsigned char z;
|
|
int level,size;
|
|
#ifdef DEBUGCMD
|
|
unsigned char *cx;
|
|
#endif /*DEBUGCMD*/
|
|
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0xa0); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
|
|
draincmd(port,cdrive,ldrive); /*Make sure buss is really idle*/
|
|
|
|
#ifdef DEBUGCMD
|
|
cx=cp;
|
|
printf("matcd%d: Slow Send port %x sel %d command %x %x %x %x %x %x %x\n",
|
|
ldrive,port,cdrive,cx[0],cx[1],cx[2],cx[3],cx[4],cx[5],cx[6]);
|
|
#endif /*DEBUGCMD*/
|
|
selectdrive(port,cdrive); /*Enable the desired target drive*/
|
|
if (*cp==ABORT) size=1;
|
|
else size=7;
|
|
level=splhigh(); /*----------------------------------------*/
|
|
for (i=0; i<size; i++) { /*The seven bytes of the command*/
|
|
outb(port+CMD,*cp++); /*must be sent within 10msec or*/
|
|
} /*the drive will ignore the cmd*/
|
|
splx(level); /*------------------------------------------------*/
|
|
return;
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
draincmd - Makes certain the buss is idle and throws away
|
|
any residual data from the drive if there is any.
|
|
Called as preface to most commands.
|
|
Added in Edit 5.
|
|
|
|
This was added because switching drive modes causes
|
|
the drive to emit buffers that were meant to be sent
|
|
to the D-to-A to be sent to the host. See setmode.
|
|
----------------------------------------------------------------------*/
|
|
void draincmd(int port,int cdrive,int ldrive)
|
|
{
|
|
int i,z;
|
|
|
|
i=inb(port+STATUS);
|
|
if (i==0xff) return;
|
|
|
|
printf("matcd%d: in draincmd: buss not idle %x - trying to fix\n",
|
|
ldrive,inb(port+STATUS));
|
|
if ((i & DTEN|STEN) == STEN) {
|
|
#ifdef DEBUGCMD
|
|
printf("matcd%d: Data present READING - ",ldrive);
|
|
#endif /*DEBUGCMD*/
|
|
i=0;
|
|
outb(port+STATUS,1); /*Enable data read*/
|
|
while ((inb(port+STATUS) & (DTEN|STEN)) == STEN) {
|
|
inb(port+DATA);
|
|
i++;
|
|
}
|
|
outb(port+STATUS,0);
|
|
#ifdef DEBUGCMD
|
|
printf("%d bytes read\n",i);
|
|
#endif /*DEBUGCMD*/
|
|
}
|
|
#ifdef DEBUGCMD
|
|
printf("matcd%d: Now read status: ",ldrive);
|
|
#endif /*DEBUGCMD*/
|
|
i=get_stat(port,ldrive); /*Read and toss status byte*/
|
|
z=inb(port+STATUS); /*Read buss status*/
|
|
#ifdef DEBUGCMD
|
|
printf("Data byte %x and status is now %x\n",i,z);
|
|
#endif /*DEBUGCMD*/
|
|
if (z!=0xff) {
|
|
printf("matcd%d: Buss not idle %x - resetting\n",
|
|
cdrive,inb(port+STATUS));
|
|
doreset(port,cdrive);
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
selectdrive - Swaps drive select bits
|
|
|
|
On Creative SB/SB16/stand-alone adapters, possibly to make them
|
|
to reverse engineer. On these boards, the drive select signals
|
|
are swapped.
|
|
----------------------------------------------------------------------*/
|
|
|
|
void selectdrive(int port,int drive)
|
|
{
|
|
switch(drive) {
|
|
case 0: /*0x00 -> 0x00*/
|
|
outb(port+SELECT,CRDRIVE0);
|
|
break;
|
|
case 1: /*0x01 -> 0x02*/
|
|
outb(port+SELECT,CRDRIVE1);
|
|
break;
|
|
case 2: /*0x02 -> 0x01*/
|
|
outb(port+SELECT,CRDRIVE2);
|
|
break;
|
|
case 3: /*0x03 -> 0x03*/
|
|
outb(port+SELECT,CRDRIVE3);
|
|
break;
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcd_pread - Read small blocks of control data from a drive
|
|
----------------------------------------------------------------------*/
|
|
|
|
void matcd_pread(int port, int count, unsigned char * data)
|
|
{
|
|
int i;
|
|
|
|
for (i=0; i<count; i++) {
|
|
*data++ = inb(port+CMD);
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcd_setmode - Configures disc to run in the desired data mode
|
|
|
|
This routine assumes the drive is already idle.
|
|
|
|
NOTE - Undocumented action of hardware: If you change (or reaffirm) data
|
|
modes with MODESELECT + BLOCKPARAM immediately after a command was
|
|
issued that aborted a DA play operation, the drive will unexpectedly
|
|
return 2532 bytes of data in a data phase on the first or second
|
|
subsequent command.
|
|
|
|
Original Symptom: drive will refuse to go idle after reading data
|
|
and status expected for a command. State mechanics for this are
|
|
not fully understood.
|
|
----------------------------------------------------------------------*/
|
|
|
|
int matcd_setmode(int ldrive, int mode)
|
|
{
|
|
struct matcd_data *cd;
|
|
int retries;
|
|
int i,z,port,cdrive;
|
|
unsigned char cmd[MAXCMDSIZ];
|
|
|
|
cd = matcd_data + ldrive;
|
|
retries=3;
|
|
cdrive=ldrive&0x03;
|
|
port=cd->iobase;
|
|
if (cd->drivemode==mode) {
|
|
return(0); /*Drive already set*/
|
|
}
|
|
|
|
/* The drive is not in the right mode, so we need to set it.
|
|
*/
|
|
|
|
zero_cmd(cmd);
|
|
cmd[0]=MODESELECT; /*Set drive transfer modes*/
|
|
/* cmd[1]=BLOCKPARAM; BLOCKPARAM==0*/
|
|
cmd[2]=mode;
|
|
switch(mode) {
|
|
case MODE_DATA:
|
|
cmd[3]=0x08; /*2048 bytes*/
|
|
break;
|
|
case MODE_USER:
|
|
cmd[3]=0x09; /*2352 bytes*/
|
|
cmd[4]=0x30;
|
|
break;
|
|
case MODE_DA:
|
|
cmd[3]=0x09; /*2352 bytes*/
|
|
cmd[4]=0x30;
|
|
break;
|
|
}
|
|
i=0;
|
|
while(retries-- > 0) {
|
|
i=matcd_fastcmd(port,ldrive,cdrive,cmd);
|
|
z=get_stat(port,ldrive);/*Read and toss status byte*/
|
|
if (i==0) {
|
|
cd->drivemode=mode; /*Set new mode*/
|
|
return(i);
|
|
}
|
|
get_error(port,ldrive,cdrive);
|
|
}
|
|
cd->drivemode=MODE_UNKNOWN; /*We failed*/
|
|
return(i);
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcd_volinfo - Read information from disc Table of Contents
|
|
----------------------------------------------------------------------*/
|
|
|
|
static int matcd_volinfo(int ldrive)
|
|
{
|
|
struct matcd_data *cd;
|
|
int port,i;
|
|
int z,cdrive;
|
|
int retry;
|
|
unsigned char cmd[MAXCMDSIZ];
|
|
unsigned char data[12];
|
|
|
|
retry=5;
|
|
cd = &matcd_data[ldrive];
|
|
cdrive=ldrive&0x03;
|
|
port=cd->iobase;
|
|
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d: In volinfo, port %x\n",ldrive,port);
|
|
#endif /*DEBUGOPEN*/
|
|
|
|
while(retry>0) {
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0xB0); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
zero_cmd(cmd);
|
|
cmd[0]=READDINFO; /*Read Disc Info*/
|
|
matcd_slowcmd(port,ldrive,cdrive,cmd);
|
|
i=waitforit(10*TICKRES,DTEN,port,"volinfo");
|
|
if (i) { /*THIS SHOULD NOT HAPPEN*/
|
|
z=get_stat(port,ldrive);/*Read and toss status byte*/
|
|
printf("matcd%d: command failed, status %x\n",
|
|
ldrive,z);
|
|
return(-1);
|
|
}
|
|
matcd_pread(port, 6, data); /*Read data returned*/
|
|
z=get_stat(port,ldrive);/*Read and toss status byte*/
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d: Data got was %x %x %x %x %x %x ",ldrive,
|
|
data[0],data[1],data[2], data[3],data[4],data[5]);
|
|
printf("status byte %x\n",z);
|
|
#endif /*DEBUGOPEN*/
|
|
if ((z & MATCD_ST_ERROR)==0)
|
|
break; /*No Error*/
|
|
|
|
/* If media change or other error, you have to read error data or
|
|
the drive will reject subsequent commands.
|
|
*/
|
|
|
|
if (chk_error(get_error(port, ldrive, cdrive))==ERR_FATAL) {
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d: command failed, status %x\n",
|
|
ldrive,z);
|
|
#endif /*DEBUGOPEN*/
|
|
return(-1);
|
|
}
|
|
if ((--retry)==0) return(-1);
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d: Retrying",ldrive);
|
|
#endif /*DEBUGOPEN*/
|
|
}
|
|
#ifdef DEBUGOPEN
|
|
printf("matcd%d: Status port %x \n",ldrive,inb(port+STATUS));
|
|
#endif /*DEBUGOPEN*/
|
|
|
|
cd->volinfo.type=data[0];
|
|
cd->volinfo.trk_high=data[2];
|
|
cd->volinfo.trk_low=data[1];
|
|
cd->volinfo.vol_msf[0]=data[3];
|
|
cd->volinfo.vol_msf[1]=data[4];
|
|
cd->volinfo.vol_msf[2]=data[5];
|
|
|
|
if (cd->volinfo.trk_low + cd->volinfo.trk_high) {
|
|
cd->flags |= MATCDLABEL;
|
|
return(0);
|
|
}
|
|
return(-1);
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
blk_to_msf - Convert block numbers into CD disk block ids
|
|
----------------------------------------------------------------------*/
|
|
|
|
static void blk_to_msf(int blk, unsigned char *msf)
|
|
{
|
|
blk += 150; /*2 seconds skip required to
|
|
reach ISO data*/
|
|
msf[0] = blk/4500;
|
|
blk %= 4500;
|
|
msf[1] = blk / 75;
|
|
msf[2] = blk % 75;
|
|
return;
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
msf_to_blk - Convert CD disk block ids into block numbers
|
|
----------------------------------------------------------------------*/
|
|
|
|
static int msf_to_blk(unsigned char * cd)
|
|
{
|
|
return(((cd[0]*60) /*Convert MSF to*/
|
|
+cd[1])*75 /*Blocks minus 2*/
|
|
+cd[2]-150); /*seconds*/
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcd_blockread - Performs actual background disc I/O operations
|
|
|
|
This routine is handed the block number to read, issues the
|
|
command to the drive, waits for it to complete, reads the
|
|
data or error, retries if needed, and returns the results
|
|
to the host.
|
|
----------------------------------------------------------------------*/
|
|
|
|
static void matcd_blockread(int state)
|
|
{
|
|
struct matcd_mbx *mbx;
|
|
int ldrive,cdrive;
|
|
int port;
|
|
struct buf *bp;
|
|
struct buf *dp;
|
|
struct matcd_data *cd;
|
|
int i,k,z;
|
|
int l,m;
|
|
struct matcd_read2 rbuf;
|
|
int blknum;
|
|
caddr_t addr;
|
|
int status;
|
|
int errtyp;
|
|
int phase;
|
|
unsigned char cmd[MAXCMDSIZ];
|
|
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0xC0 + (diagloop * 0x100));/*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
mbx = &matcd_data[state & 0x0f].mbx;
|
|
ldrive=mbx->ldrive; /*ldrive is logical drive #*/
|
|
cdrive=ldrive & 0x03; /*cdrive is drive # on a controller*/
|
|
port=mbx->port; /*port is base port for i/f*/
|
|
bp= mbx->bp;
|
|
cd=&matcd_data[ldrive];
|
|
|
|
dp=&request_head[mbx->controller];
|
|
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: Show state %x cdrive %d partition %d\n",
|
|
ldrive,state,cdrive,mbx->partition);
|
|
#endif /*DEBUGIO*/
|
|
|
|
loop:
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: Top dp %x\n",ldrive,dp);
|
|
#endif /*DEBUGIO*/
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0xCF + (diagloop * 0x100));/*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
switch (state & 0xf0) {
|
|
case MATCD_READ_1:
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: State 1 cd->flags %x\n",ldrive,cd->flags);
|
|
#endif /*DEBUGIO*/
|
|
#ifdef DIAGPORT
|
|
diagloop=0;
|
|
DIAGOUT(DIAGPORT,0xC1); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
/* to check for raw/cooked mode */
|
|
if (cd->partflags[mbx->partition] & MATCDREADRAW) {
|
|
mbx->sz = MATCDRBLK;
|
|
i=matcd_setmode(ldrive, MODE_DA);
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: Set MODE_DA result %d\n",ldrive,i);
|
|
#endif /*DEBUGIO*/
|
|
} else {
|
|
mbx->sz = cd->blksize;
|
|
i=matcd_setmode(ldrive, MODE_DATA);
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: Set MODE_DATA result %d\n",ldrive,i);
|
|
#endif /*DEBUGIO*/
|
|
}
|
|
/*for first block*/
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: A mbx %x bp %x b_bcount %x sz %x\n",
|
|
ldrive,mbx,bp,bp->b_bcount,mbx->sz);
|
|
#endif /*DEBUGIO*/
|
|
mbx->nblk = (bp->b_bcount + (mbx->sz-1)) / mbx->sz;
|
|
mbx->skip=0;
|
|
nextblock:
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: at Nextblock b_blkno %d\n",
|
|
ldrive,bp->b_blkno);
|
|
#endif /*DEBUGIO*/
|
|
|
|
blknum=(bp->b_blkno / (mbx->sz/DEV_BSIZE))
|
|
+ mbx->p_offset + mbx->skip/mbx->sz;
|
|
|
|
blk_to_msf(blknum,rbuf.start_msf);
|
|
|
|
zero_cmd(cmd);
|
|
cmd[0]=READ; /*Get drive ID*/
|
|
cmd[1]=rbuf.start_msf[0];
|
|
cmd[2]=rbuf.start_msf[1];
|
|
cmd[3]=rbuf.start_msf[2];
|
|
cmd[6]=1;
|
|
matcd_slowcmd(port,ldrive,cdrive,cmd);
|
|
|
|
/* Now that we have issued the command, check immediately to
|
|
see if data is ready. The drive has read-ahead caching, so
|
|
it is possible the data is already in the drive buffer.
|
|
|
|
If the data is not ready, schedule a wakeup and later on this
|
|
code will run again to see if the data is ready then.
|
|
*/
|
|
|
|
case MATCD_READ_2:
|
|
state=MATCD_READ_2+ldrive;
|
|
phase = (inb(port+STATUS)) & (DTEN|STEN);
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: In state 2 status %x ",ldrive,phase);
|
|
#endif /*DEBUGIO*/
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0xC2 + (diagloop++ * 0x100));/*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
switch(phase) {
|
|
case (DTEN|STEN): /*DTEN==H STEN==H*/
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: Sleeping\n",ldrive);
|
|
#endif /*DEBUGIO*/
|
|
timeout((timeout_func_t)matcd_blockread,
|
|
(caddr_t)MATCD_READ_2+ldrive,hz/100);
|
|
return;
|
|
|
|
|
|
case STEN: /*DTEN=L STEN=H*/
|
|
case 0: /*DTEN=L STEN=L*/
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: Data Phase\n",ldrive);
|
|
#endif /*DEBUGIO*/
|
|
outb(port+STATUS,1); /*Enable data read*/
|
|
addr=bp->b_un.b_addr + mbx->skip;
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: Xfer Addr %x size %x",
|
|
ldrive,addr,mbx->sz);
|
|
#endif /*DEBUGIO*/
|
|
i=0;
|
|
while(inb(port+STATUS)==0xfd) {
|
|
*addr++=inb(port+DATA);
|
|
i++;
|
|
}
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: Read %d bytes\n",ldrive,i);
|
|
#endif /*DEBUGIO*/
|
|
outb(port+STATUS,0); /*Disable data read*/
|
|
|
|
|
|
/* Now, wait for the Status phase to arrive. This will also
|
|
tell us if any went wrong with the request.
|
|
*/
|
|
while((inb(port+STATUS)&(DTEN|STEN)) != DTEN);
|
|
status=get_stat(port,ldrive); /*Read and toss status byte*/
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: Status port %x byte %x ",
|
|
ldrive,i,status);
|
|
#endif /*DEBUGIO*/
|
|
if (status & MATCD_ST_ERROR) {
|
|
i=get_error(port,ldrive,cdrive);
|
|
printf("matcd%d: %s while reading block %d [Soft]\n",
|
|
ldrive,matcderrors[i],bp->b_blkno);
|
|
}
|
|
media_chk(cd,i,ldrive);
|
|
|
|
if (--mbx->nblk > 0) {
|
|
mbx->skip += mbx->sz;
|
|
goto nextblock; /*Oooooh, you flunk the course*/
|
|
}
|
|
bp->b_resid=0;
|
|
biodone(bp);
|
|
|
|
unlockbuss(ldrive>>2, ldrive); /*Release buss lock*/
|
|
matcd_start(dp);
|
|
return;
|
|
|
|
/* Here we skipped the data phase and went directly to status.
|
|
This indicates a hard error.
|
|
*/
|
|
|
|
case DTEN: /*DTEN=H STEN=L*/
|
|
status=get_stat(port,ldrive); /*Read and toss status byte*/
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: error, status was %x\n",
|
|
ldrive,status);
|
|
#endif /*DEBUGIO*/
|
|
|
|
/* Ok, we need more details, so read error. This is needed to issue
|
|
any further commands anyway
|
|
*/
|
|
|
|
errtyp=get_error(port,ldrive,cdrive);
|
|
printf("matcd%d: %s while reading block %d\n",
|
|
ldrive,matcderrors[errtyp],bp->b_blkno);
|
|
|
|
if (media_chk(cd,errtyp,ldrive))
|
|
goto giveup;
|
|
|
|
errtyp=chk_error(errtyp);
|
|
switch(errtyp) {
|
|
case ERR_RETRY: /*We can retry this error, but the
|
|
drive probably has already*/
|
|
if (mbx->retry-- > 0 ) {
|
|
state=MATCD_READ_1+ldrive;
|
|
#ifdef DEBUGIO
|
|
printf("matcd%d: Attempting retry\n",
|
|
ldrive);
|
|
#endif /*DEBUGIO*/
|
|
goto loop;
|
|
}
|
|
goto giveup;
|
|
|
|
/* These errors usually indicate the user took the media from the
|
|
drive while the dev was open. We will invalidate the unit
|
|
until it closes when we see this.
|
|
*/
|
|
case ERR_INIT:/*Media probably was removed
|
|
while the dev was open.
|
|
Invalidate the unit until
|
|
it is closed.*/
|
|
|
|
case ERR_FATAL:/*This type of error is so
|
|
bad we will never recover
|
|
even if we retry.*/
|
|
default:
|
|
giveup:
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0xCE + (diagloop * 0x100));/*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
bp->b_flags |= B_ERROR;
|
|
bp->b_resid = bp->b_bcount;
|
|
biodone(bp);
|
|
unlockbuss(ldrive>>2, ldrive);
|
|
matcd_start(dp);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcd_eject - Open drive tray
|
|
----------------------------------------------------------------------*/
|
|
|
|
int matcd_eject(int ldrive, int cdrive, int controller)
|
|
{
|
|
int retries,i,z,port;
|
|
struct matcd_data *cd;
|
|
unsigned char cmd[MAXCMDSIZ];
|
|
|
|
cd=&matcd_data[ldrive];
|
|
port=cd->iobase; /*Get I/O port base*/
|
|
|
|
zero_cmd(cmd); /*Initialize command buffer*/
|
|
#ifdef LOCKDRIVE
|
|
cmd[0]=LOCK; /*Unlock drive*/
|
|
i=docmd(cmd,ldrive,cdrive,controller,port); /*Issue command*/
|
|
#endif /*LOCKDRIVE*/
|
|
cmd[0]=DOOROPEN; /*Open Door*/
|
|
i=docmd(cmd,ldrive,cdrive,controller,port); /*Issue command*/
|
|
cd->flags &= ~MATCDLABEL; /*Mark volume info invalid*/
|
|
return(i); /*Return result we got*/
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
docmd - Get the buss, do the command, wait for completion,
|
|
attempt retries, give up the buss.
|
|
For commands that do not return data.
|
|
----------------------------------------------------------------------*/
|
|
|
|
int docmd(char * cmd, int ldrive, int cdrive, int controller, int port)
|
|
{
|
|
int retries,i,z;
|
|
|
|
lockbuss(controller, ldrive); /*Request buss*/
|
|
retries=3;
|
|
while(retries-- > 0) {
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0xD0); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
matcd_slowcmd(port,ldrive,cdrive,cmd);
|
|
i=waitforit(80*TICKRES,DTEN,port,"cmd");
|
|
z=get_stat(port,ldrive);/*Read and toss status byte*/
|
|
if ((z & MATCD_ST_ERROR)==0) break;
|
|
i=chk_error(get_error(port,ldrive,cdrive));
|
|
if (i!=ERR_INIT) {
|
|
unlockbuss(controller, ldrive); /*Release buss*/
|
|
return(EFAULT);
|
|
}
|
|
}
|
|
unlockbuss(controller, ldrive); /*Release buss*/
|
|
return(i);
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
get_error - Read the error that aborted a command.
|
|
Created in Edit 6
|
|
----------------------------------------------------------------------*/
|
|
|
|
int get_error(int port, int ldrive, int cdrive)
|
|
{
|
|
int status,errnum;
|
|
unsigned char cmd1[MAXCMDSIZ];
|
|
unsigned char data[12];
|
|
|
|
zero_cmd(cmd1);
|
|
cmd1[0]=READERROR; /*Enquire*/
|
|
matcd_fastcmd(port,ldrive,cdrive,cmd1);
|
|
matcd_pread(port, 8, data); /*Read data returned*/
|
|
errnum=data[2]; /*Caller wants it classified*/
|
|
status=get_stat(port,ldrive); /*Read and toss status byte*/
|
|
|
|
#ifdef DEBUGCMD
|
|
printf("matcd%d: Chkerror found %x on command %x addrval %x statusdata %x statusport %x\n",
|
|
ldrive,errnum,data[1],data[0],status,inb(port+STATUS));
|
|
#endif /*DEBUGCMD*/
|
|
return(errnum);
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
chk_error - Classify the error that the drive reported
|
|
Created in Edit 6
|
|
----------------------------------------------------------------------*/
|
|
|
|
int chk_error(int errnum)
|
|
{
|
|
switch(errnum) {
|
|
/* These are errors we can attempt a retry for, although the drive
|
|
has already done so.
|
|
*/
|
|
case UNRECV_ERROR:
|
|
case SEEK_ERROR:
|
|
case TRACK_ERROR:
|
|
case FOCUS_ERROR:
|
|
case CLV_ERROR:
|
|
case DATA_ERROR:
|
|
return(ERR_RETRY);
|
|
|
|
/* These errors usually indicate the user took the media from the
|
|
drive while the dev was open. We will invalidate the unit
|
|
until it closes when we see this.
|
|
*/
|
|
case NOT_READY:
|
|
case MEDIA_CHANGED:
|
|
case DISC_OUT:
|
|
case HARD_RESET:
|
|
return (ERR_INIT);
|
|
|
|
/* These errors indicate the system is confused about the drive
|
|
or media, and point to bugs in the driver or OS. These errors
|
|
cannot be retried since you will always get the same error.
|
|
*/
|
|
|
|
case RAM_ERROR:
|
|
case DIAG_ERROR:
|
|
case CDB_ERROR:
|
|
case END_ADDRESS:
|
|
case MODE_ERROR:
|
|
case ILLEGAL_REQ:
|
|
case ADDRESS_ERROR:
|
|
default:
|
|
return (ERR_FATAL);
|
|
}
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
get_stat - Reads status byte
|
|
|
|
This routine should be totally unnecessary, performing the
|
|
task with a single line of in-line code. However in special
|
|
cases, the drives return blocks of data that are not associated
|
|
with the command in question. This appears to be a firmware
|
|
error and the rest of the driver makes an effort to avoid
|
|
triggering the fault. However, reading and throwing this
|
|
bogus data is faster and less destructive than resetting all
|
|
the drives on a given controller, plus it leaves the other drives
|
|
unaffected.
|
|
----------------------------------------------------------------------*/
|
|
|
|
int get_stat(int port,int ldrive)
|
|
{
|
|
int status;
|
|
status=inb(port+DATA); /*Read the status byte, last step of cmd*/
|
|
while ((inb(port+STATUS))!=0xff) {
|
|
printf("matcd%d: get_stat: After reading status byte, buss didn't go idle\n",ldrive);
|
|
if (( status & DTEN|STEN) == STEN) {
|
|
int k;
|
|
k=0;
|
|
#ifdef DEBUGCMD
|
|
printf("matcd%d: DATA PRESENT!!!! DISCARDING\n",ldrive);
|
|
#endif /*DEBUGCMD*/
|
|
outb(port+STATUS,1); /*Enable data read*/
|
|
while ((inb(port+STATUS) & (DTEN|STEN)) == STEN) {
|
|
inb(port+DATA);
|
|
/* printf("%2x ",inb(port+DATA));*/
|
|
k++;
|
|
}
|
|
outb(port+STATUS,0);
|
|
#ifdef DEBUGCMD
|
|
printf("\nmatcd%d: BYTES READ IN DATA was %d\n",
|
|
ldrive,k);
|
|
#endif /*DEBUGCMD*/
|
|
}
|
|
status=inb(port+DATA); /*Read the status byte again*/
|
|
#ifdef DEBUGCMD
|
|
printf("matcd%d: Next status byte is %x\n",ldrive,status);
|
|
#endif /*DEBUGCMD*/
|
|
}
|
|
return(status);
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
waitforit - Waits for a command started by slowcmd to complete.
|
|
----------------------------------------------------------------------*/
|
|
|
|
int waitforit(int timelimit, int state, int port, char * where)
|
|
{
|
|
int i,j;
|
|
|
|
j=i=0;
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0xE0); /*Show where we are*/
|
|
diagloop=0;
|
|
#endif /*DIAGPORT*/
|
|
#ifdef DEBUGCMD
|
|
printf("matcd: waitforit port %x timelimit %x hz %x\n",
|
|
port,timelimit,hz);
|
|
#endif /*DEBUGCMD*/
|
|
while (i<timelimit) {
|
|
j=inb(port+STATUS) & (STEN|DTEN); /*Read status*/
|
|
if (j!=(STEN|DTEN)) break;
|
|
timeout((timeout_func_t)watchdog, (caddr_t)0,hz/100);
|
|
tsleep((caddr_t)&port_hints, PRIBIO, where, 0);
|
|
i++;
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0xE1+(diagloop++ * 0x100)); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
}
|
|
#ifdef DEBUGCMD
|
|
printf("matcd: Count was %d\n",i);
|
|
#endif /*DEBUGCMD*/
|
|
if (j==state) return(0); /*Command complete*/
|
|
#ifdef DEBUGCMD
|
|
printf("matcd: Timeout!");
|
|
#endif /*DEBUGCMD*/
|
|
return(1); /*Timeout occurred*/
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
watchdog - Gives us a heartbeat for things we are waiting on
|
|
----------------------------------------------------------------------*/
|
|
|
|
static void watchdog(int state, char * foo)
|
|
{
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0xF0); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
wakeup((caddr_t)&port_hints);
|
|
return;
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
lockbuss - Wait for the buss on the requested driver interface
|
|
to go idle and acquire it.
|
|
Created in Edit 6
|
|
----------------------------------------------------------------------*/
|
|
|
|
void lockbuss(int controller, int ldrive)
|
|
{
|
|
while ((if_state[controller] & BUSSBUSY)) {
|
|
#ifdef DEBUGSLEEP
|
|
printf("matcd%d: Can't do it now - going to sleep\n,
|
|
ldrive");
|
|
#endif /*DEBUGSLEEP*/
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0xF1); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
tsleep((caddr_t)&matcd_data->status, PRIBIO,
|
|
"matcdopen", 0);
|
|
}
|
|
if_state[controller] |= BUSSBUSY; /*It's ours NOW*/
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0xF2); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
#ifdef DEBUGSLEEP
|
|
printf("matcd%d: BUSS locked in lockbuss\n",ldrive);
|
|
#endif /*DEBUGSLEEP*/
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
lockbuss - Wait for the buss on the requested driver interface
|
|
to go idle and acquire it.
|
|
Created in Edit 6
|
|
----------------------------------------------------------------------*/
|
|
|
|
void unlockbuss(int controller, int ldrive)
|
|
{
|
|
#ifdef DIAGPORT
|
|
DIAGOUT(DIAGPORT,0xF4); /*Show where we are*/
|
|
#endif /*DIAGPORT*/
|
|
if_state[controller] &= ~BUSSBUSY;
|
|
#ifdef DEBUGSLEEP
|
|
printf("matcd%d: bussunlocked\n",ldrive);
|
|
#endif /*DEBUGSLEEP*/
|
|
wakeup((caddr_t)&matcd_data->status); /*Wakeup other users*/
|
|
matcd_start(&request_head[controller]); /*Wake up any block I/O*/
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
media_chk - Checks error for types related to media
|
|
changes.
|
|
----------------------------------------------------------------------*/
|
|
|
|
int media_chk(struct matcd_data *cd,int errnum,int ldrive)
|
|
{
|
|
if (errnum==NOT_READY ||
|
|
errnum==MEDIA_CHANGED ||
|
|
errnum==HARD_RESET ||
|
|
errnum==DISC_OUT) {
|
|
cd->flags &= ~MATCDLABEL; /*Mark label as invalid*/
|
|
|
|
if ((cd->flags & MATCDWARN)==0) { /*Have we said this*/
|
|
printf("matcd%d: Media changed - Further I/O aborted until device closed\n",ldrive);
|
|
cd->flags |= MATCDWARN;
|
|
}
|
|
return(1);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
The following functions are related to the audio playback
|
|
capabilities of the drive. They can be omitted from the
|
|
finished driver using the FULLDRIVER conditional.
|
|
|
|
The full set of features the drive is capable of are currently
|
|
not implemented but will be added in an upcoming release.
|
|
----------------------------------------------------------------------*/
|
|
#ifdef FULLDRIVER
|
|
/*----------------------------------------------------------------------
|
|
matcd_playtracks - Plays one or more audio tracks
|
|
----------------------------------------------------------------------*/
|
|
|
|
static int matcd_playtracks(int ldrive, int cdrive, int controller,
|
|
struct ioc_play_track *pt)
|
|
{
|
|
struct matcd_data *cd;
|
|
int start,end;
|
|
int i,port;
|
|
unsigned char cmd[MAXCMDSIZ];
|
|
|
|
cd=&matcd_data[ldrive];
|
|
port=cd->iobase;
|
|
|
|
if ((cd->flags & MATCDLABEL)==0)
|
|
return(EIO); /*Refuse after chg error*/
|
|
|
|
start=pt->start_track;
|
|
end=pt->end_track;
|
|
|
|
if (start < 1 || /*Starting track valid?*/
|
|
end < 1 || /*Ending track valid?*/
|
|
start > end || /*Start higher than end?*/
|
|
end > cd->volinfo.trk_high) /*End track higher than disc size?*/
|
|
return(ESPIPE); /*Track out of range*/
|
|
|
|
lockbuss(controller, ldrive); /*Request buss*/
|
|
i=matcd_setmode(ldrive, MODE_DA);/*Force drive into audio mode*/
|
|
unlockbuss(controller, ldrive); /*Release buss*/
|
|
if (i!=0) {
|
|
return(i); /*Not legal for this media?*/
|
|
}
|
|
zero_cmd(cmd);
|
|
cmd[0]=PLAYTRKS; /*Play Audio Track/Index*/
|
|
cmd[1]=start;
|
|
cmd[2]=pt->start_index;
|
|
cmd[3]=end;
|
|
cmd[4]=pt->end_index;
|
|
i=docmd(cmd,ldrive,cdrive,controller,port); /*Issue command*/
|
|
#ifdef DEBUGIOCTL
|
|
printf("matcd%d: Play track results %d \n",ldrive,i);
|
|
#endif /*DEBUGIOCTL*/
|
|
return(i);
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcd_playmsf - Plays between a range of blocks
|
|
----------------------------------------------------------------------*/
|
|
|
|
static int matcd_playmsf(int ldrive, int cdrive, int controller,
|
|
struct ioc_play_msf *pt)
|
|
{
|
|
struct matcd_data *cd;
|
|
int i,port;
|
|
unsigned char cmd[MAXCMDSIZ];
|
|
|
|
cd=&matcd_data[ldrive];
|
|
port=cd->iobase;
|
|
|
|
#ifdef DEBUGIOCTL
|
|
printf("matcd%d: playmsf %2x %2x %2x -> %2x %2x %2x\n",
|
|
ldrive,pt->start_m, pt->start_s, pt->start_f, pt->end_m,
|
|
pt->end_s,pt->end_f);
|
|
#endif /*DEBUGIOCTL*/
|
|
|
|
if ((cd->flags & MATCDLABEL)==0)
|
|
return(EIO); /*Refuse after chg error*/
|
|
|
|
if ((cd->volinfo.vol_msf[0]==0 &&
|
|
cd->volinfo.vol_msf[1]<2) || /*Must be after 0'1"75F*/
|
|
msf_to_blk((char *)&pt->start_m) >
|
|
msf_to_blk((char *)&cd->volinfo.vol_msf)) {
|
|
#ifdef DEBUGIOCTL
|
|
printf("matcd%d: Invalid block combination\n",ldrive);
|
|
#endif /*DEBUGIOCTL*/
|
|
return(ESPIPE); /*Track out of range*/
|
|
}
|
|
|
|
|
|
lockbuss(controller, ldrive); /*Request buss*/
|
|
i=matcd_setmode(ldrive, MODE_DA);/*Force drive into audio mode*/
|
|
unlockbuss(controller, ldrive); /*Release buss*/
|
|
if (i!=0) {
|
|
return(i); /*Not legal for this media?*/
|
|
}
|
|
zero_cmd(cmd);
|
|
cmd[0]=PLAYBLOCKS; /*Play Audio Blocks*/
|
|
cmd[1]=pt->start_m;
|
|
cmd[2]=pt->start_s;
|
|
cmd[3]=pt->start_f;
|
|
cmd[4]=pt->end_m;
|
|
cmd[5]=pt->end_s;
|
|
cmd[6]=pt->end_f;
|
|
i=docmd(cmd,ldrive,cdrive,controller,port); /*Issue command*/
|
|
return(i);
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcd_pause - Pause or Resume audio playback
|
|
----------------------------------------------------------------------*/
|
|
|
|
static int matcd_pause(int ldrive, int cdrive, int controller,
|
|
struct ioc_play_msf * addr,int action)
|
|
{
|
|
struct matcd_data *cd;
|
|
int i,port;
|
|
unsigned char cmd[MAXCMDSIZ];
|
|
|
|
cd=&matcd_data[ldrive];
|
|
port=cd->iobase;
|
|
|
|
if ((cd->flags & MATCDLABEL)==0)
|
|
return(EIO); /*Refuse after chg error*/
|
|
|
|
zero_cmd(cmd);
|
|
cmd[0]=PAUSE; /*Pause or Resume playing audio*/
|
|
cmd[1]=action;
|
|
i=docmd(cmd,ldrive,cdrive,controller,port); /*Issue command*/
|
|
#ifdef DEBUGIOCTL
|
|
printf("matcd%d: Pause / Resume results %d \n",ldrive,i);
|
|
#endif /*DEBUGIOCTL*/
|
|
return(i);
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
matcd_stop - Stop audio playback
|
|
----------------------------------------------------------------------*/
|
|
|
|
static int matcd_stop(int ldrive, int cdrive, int controller,
|
|
struct ioc_play_msf * addr)
|
|
{
|
|
struct matcd_data *cd;
|
|
int i,port;
|
|
unsigned char cmd[MAXCMDSIZ];
|
|
|
|
cd=&matcd_data[ldrive];
|
|
port=cd->iobase;
|
|
|
|
if ((cd->flags & MATCDLABEL)==0)
|
|
return(EIO); /*Refuse after chg error*/
|
|
|
|
zero_cmd(cmd);
|
|
cmd[0]=ABORT; /*Abort playing audio*/
|
|
i=docmd(cmd,ldrive,cdrive,controller,port); /*Issue command*/
|
|
#ifdef DEBUGIOCTL
|
|
printf("matcd%d: Abort results %d \n",ldrive,i);
|
|
#endif /*DEBUGIOCTL*/
|
|
return(i);
|
|
}
|
|
|
|
#endif /*FULLDRIVER*/
|
|
|
|
/*End of matcd.c*/
|
|
|