freebsd-skq/sys/dev/isp/ispvar.h

504 lines
14 KiB
C

/* $FreeBSD$ */
/*
* Soft Definitions for for Qlogic ISP SCSI adapters.
*
* Copyright (c) 1997, 1998, 1999 by Matthew Jacob
* NASA/Ames Research Center
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#ifndef _ISPVAR_H
#define _ISPVAR_H
#if defined(__NetBSD__) || defined(__OpenBSD__)
#include <dev/ic/ispmbox.h>
#ifdef ISP_TARGET_MODE
#include <dev/ic/isp_target.h>
#include <dev/ic/isp_tpublic.h>
#endif
#endif
#ifdef __FreeBSD__
#include <dev/isp/ispmbox.h>
#ifdef ISP_TARGET_MODE
#include <dev/isp/isp_target.h>
#include <dev/isp/isp_tpublic.h>
#endif
#endif
#ifdef __linux__
#include "ispmbox.h"
#ifdef ISP_TARGET_MODE
#include "isp_target.h"
#include "isp_tpublic.h"
#endif
#endif
#define ISP_CORE_VERSION_MAJOR 1
#define ISP_CORE_VERSION_MINOR 13
/*
* Vector for bus specific code to provide specific services.
*/
struct ispsoftc;
struct ispmdvec {
u_int16_t (*dv_rd_reg) __P((struct ispsoftc *, int));
void (*dv_wr_reg) __P((struct ispsoftc *, int, u_int16_t));
int (*dv_mbxdma) __P((struct ispsoftc *));
int (*dv_dmaset) __P((struct ispsoftc *,
ISP_SCSI_XFER_T *, ispreq_t *, u_int16_t *, u_int16_t));
void (*dv_dmaclr)
__P((struct ispsoftc *, ISP_SCSI_XFER_T *, u_int32_t));
void (*dv_reset0) __P((struct ispsoftc *));
void (*dv_reset1) __P((struct ispsoftc *));
void (*dv_dregs) __P((struct ispsoftc *));
const u_int16_t *dv_ispfw; /* ptr to f/w */
u_int16_t dv_fwlen; /* length of f/w */
u_int16_t dv_codeorg; /* code ORG for f/w */
u_int32_t dv_fwrev; /* f/w revision */
/*
* Initial values for conf1 register
*/
u_int16_t dv_conf1;
u_int16_t dv_clock; /* clock frequency */
};
#define MAX_TARGETS 16
#ifdef ISP2100_FABRIC
#define MAX_FC_TARG 256
#else
#define MAX_FC_TARG 126
#endif
#define ISP_MAX_TARGETS(isp) (IS_FC(isp)? MAX_FC_TARG : MAX_TARGETS)
#ifdef ISP2100_SCCLUN
#define _ISP_FC_LUN(isp) 65536
#else
#define _ISP_FC_LUN(isp) 16
#endif
#define _ISP_SCSI_LUN(isp) \
((ISP_FW_REVX(isp->isp_fwrev) >= ISP_FW_REV(7, 55, 0))? 32 : 8)
#define ISP_MAX_LUNS(isp) \
(IS_FC(isp)? _ISP_FC_LUN(isp) : _ISP_SCSI_LUN(isp))
/*
* Macros to read, write ISP registers through bus specific code.
*/
#define ISP_READ(isp, reg) \
(*(isp)->isp_mdvec->dv_rd_reg)((isp), (reg))
#define ISP_WRITE(isp, reg, val) \
(*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), (val))
#define ISP_MBOXDMASETUP(isp) \
(*(isp)->isp_mdvec->dv_mbxdma)((isp))
#define ISP_DMASETUP(isp, xs, req, iptrp, optr) \
(*(isp)->isp_mdvec->dv_dmaset)((isp), (xs), (req), (iptrp), (optr))
#define ISP_DMAFREE(isp, xs, hndl) \
if ((isp)->isp_mdvec->dv_dmaclr) \
(*(isp)->isp_mdvec->dv_dmaclr)((isp), (xs), (hndl))
#define ISP_RESET0(isp) \
if ((isp)->isp_mdvec->dv_reset0) (*(isp)->isp_mdvec->dv_reset0)((isp))
#define ISP_RESET1(isp) \
if ((isp)->isp_mdvec->dv_reset1) (*(isp)->isp_mdvec->dv_reset1)((isp))
#define ISP_DUMPREGS(isp) \
if ((isp)->isp_mdvec->dv_dregs) (*(isp)->isp_mdvec->dv_dregs)((isp))
#define ISP_SETBITS(isp, reg, val) \
(*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) | (val))
#define ISP_CLRBITS(isp, reg, val) \
(*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) & ~(val))
/* this is the size of a queue entry (request and response) */
#define QENTRY_LEN 64
/* both request and result queue length must be a power of two */
#define RQUEST_QUEUE_LEN MAXISPREQUEST
/* I've seen wierdnesses with the result queue < 64 */
#if MAXISPREQUEST > 64
#define RESULT_QUEUE_LEN (MAXISPREQUEST/2)
#else
#define RESULT_QUEUE_LEN MAXISPREQUEST
#endif
#define ISP_QUEUE_ENTRY(q, idx) ((q) + ((idx) * QENTRY_LEN))
#define ISP_QUEUE_SIZE(n) ((n) * QENTRY_LEN)
#define ISP_NXT_QENTRY(idx, qlen) (((idx) + 1) & ((qlen)-1))
#define ISP_QAVAIL(in, out, qlen) \
((in == out)? (qlen - 1) : ((in > out)? \
((qlen - 1) - (in - out)) : (out - in - 1)))
#define ISP_ADD_REQUEST(isp, iptr) \
ISP_WRITE(isp, INMAILBOX4, iptr), isp->isp_reqidx = iptr
/*
* SCSI Specific Host Adapter Parameters- per bus, per target
*/
typedef struct {
u_int isp_gotdparms : 1,
isp_req_ack_active_neg : 1,
isp_data_line_active_neg: 1,
isp_cmd_dma_burst_enable: 1,
isp_data_dma_burst_enabl: 1,
isp_fifo_threshold : 3,
isp_ultramode : 1,
isp_diffmode : 1,
isp_lvdmode : 1,
: 1,
isp_initiator_id : 4,
isp_async_data_setup : 4;
u_int16_t isp_selection_timeout;
u_int16_t isp_max_queue_depth;
u_int8_t isp_tag_aging;
u_int8_t isp_bus_reset_delay;
u_int8_t isp_retry_count;
u_int8_t isp_retry_delay;
struct {
u_int dev_enable : 1, /* ignored */
: 1,
dev_update : 1,
dev_refresh : 1,
exc_throttle : 8,
cur_offset : 4,
sync_offset : 4;
u_int8_t cur_period; /* current sync period */
u_int8_t sync_period; /* goal sync period */
u_int16_t dev_flags; /* goal device flags */
u_int16_t cur_dflags; /* current device flags */
} isp_devparam[MAX_TARGETS];
} sdparam;
/*
* Device Flags
*/
#define DPARM_DISC 0x8000
#define DPARM_PARITY 0x4000
#define DPARM_WIDE 0x2000
#define DPARM_SYNC 0x1000
#define DPARM_TQING 0x0800
#define DPARM_ARQ 0x0400
#define DPARM_QFRZ 0x0200
#define DPARM_RENEG 0x0100
#define DPARM_NARROW 0x0080 /* Possibly only available with >= 7.55 fw */
#define DPARM_ASYNC 0x0040 /* Possibly only available with >= 7.55 fw */
#define DPARM_DEFAULT (0xFF00 & ~DPARM_QFRZ)
#define DPARM_SAFE_DFLT (DPARM_DEFAULT & ~(DPARM_WIDE|DPARM_SYNC|DPARM_TQING))
/* technically, not really correct, as they need to be rated based upon clock */
#define ISP_40M_SYNCPARMS 0x080a
#define ISP_20M_SYNCPARMS 0x080c
#define ISP_10M_SYNCPARMS 0x0c19
#define ISP_08M_SYNCPARMS 0x0c25
#define ISP_05M_SYNCPARMS 0x0c32
#define ISP_04M_SYNCPARMS 0x0c41
/*
* Fibre Channel Specifics
*/
#define FL_PORT_ID 0x7e /* FL_Port Special ID */
#define FC_PORT_ID 0x7f /* Fabric Controller Special ID */
#define FC_SNS_ID 0x80 /* SNS Server Special ID */
typedef struct {
u_int32_t isp_fwoptions : 16,
: 4,
loop_seen_once : 1,
isp_loopstate : 3, /* Current Loop State */
isp_fwstate : 3, /* ISP F/W state */
isp_gotdparms : 1,
isp_topo : 3,
isp_onfabric : 1;
u_int8_t isp_loopid; /* hard loop id */
u_int8_t isp_alpa; /* ALPA */
volatile u_int16_t isp_lipseq; /* LIP sequence # */
u_int32_t isp_portid;
u_int8_t isp_execthrottle;
u_int8_t isp_retry_delay;
u_int8_t isp_retry_count;
u_int8_t isp_reserved;
u_int16_t isp_maxalloc;
u_int16_t isp_maxfrmlen;
u_int64_t isp_nodewwn;
u_int64_t isp_portwwn;
/*
* Port Data Base. This is indexed by 'target', which is invariate.
* However, elements within can move around due to loop changes,
* so the actual loop ID passed to the F/W is in this structure.
* The first time the loop is seen up, loopid will match the index
* (except for fabric nodes which are above mapped above FC_SNS_ID
* and are completely virtual), but subsequent LIPs can cause things
* to move around.
*/
struct lportdb {
u_int
loopid : 8,
: 4,
fabdev : 1,
roles : 2,
valid : 1;
u_int32_t portid;
u_int64_t node_wwn;
u_int64_t port_wwn;
} portdb[MAX_FC_TARG], tport[FL_PORT_ID];
/*
* Scratch DMA mapped in area to fetch Port Database stuff, etc.
*/
caddr_t isp_scratch;
u_int32_t isp_scdma;
} fcparam;
#define FW_CONFIG_WAIT 0
#define FW_WAIT_AL_PA 1
#define FW_WAIT_LOGIN 2
#define FW_READY 3
#define FW_LOSS_OF_SYNC 4
#define FW_ERROR 5
#define FW_REINIT 6
#define FW_NON_PART 7
#define LOOP_NIL 0
#define LOOP_LIP_RCVD 1
#define LOOP_PDB_RCVD 2
#define LOOP_READY 7
#define TOPO_NL_PORT 0
#define TOPO_FL_PORT 1
#define TOPO_N_PORT 2
#define TOPO_F_PORT 3
#define TOPO_PTP_STUB 4
/*
* Soft Structure per host adapter
*/
struct ispsoftc {
/*
* Platform (OS) specific data
*/
struct isposinfo isp_osinfo;
/*
* Pointer to bus specific functions and data
*/
struct ispmdvec * isp_mdvec;
/*
* (Mostly) nonvolatile state. Board specific parameters
* may contain some volatile state (e.g., current loop state).
*/
void * isp_param; /* type specific */
u_int16_t isp_fwrev[3]; /* Loaded F/W revision */
u_int16_t isp_romfw_rev[3]; /* PROM F/W revision */
u_int16_t isp_maxcmds; /* max possible I/O cmds */
u_int8_t isp_type; /* HBA Chip Type */
u_int8_t isp_revision; /* HBA Chip H/W Revision */
u_int32_t : 4,
isp_touched : 1, /* board ever seen? */
isp_fast_mttr : 1, /* fast sram */
isp_bustype : 1, /* SBus or PCI */
isp_dogactive : 1, /* watchdog running */
isp_dblev : 8, /* debug level */
isp_clock : 8, /* input clock */
isp_confopts : 8; /* config options */
/*
* Volatile state
*/
volatile u_int32_t : 9,
isp_state : 3,
isp_sendmarker : 2, /* send a marker entry */
isp_update : 2, /* update parameters */
isp_nactive : 16; /* how many commands active */
volatile u_int16_t isp_reqodx; /* index of last ISP pickup */
volatile u_int16_t isp_reqidx; /* index of next request */
volatile u_int16_t isp_residx; /* index of next result */
volatile u_int16_t isp_lasthdls; /* last handle seed */
/*
* Active commands are stored here, indexed by handle functions.
*/
ISP_SCSI_XFER_T **isp_xflist;
/*
* request/result queue pointers and dma handles for them.
*/
caddr_t isp_rquest;
caddr_t isp_result;
u_int32_t isp_rquest_dma;
u_int32_t isp_result_dma;
};
#define SDPARAM(isp) ((sdparam *) (isp)->isp_param)
#define FCPARAM(isp) ((fcparam *) (isp)->isp_param)
/*
* ISP States
*/
#define ISP_NILSTATE 0
#define ISP_RESETSTATE 1
#define ISP_INITSTATE 2
#define ISP_RUNSTATE 3
/*
* ISP Configuration Options
*/
#define ISP_CFG_NORELOAD 0x80 /* don't download f/w */
#define ISP_CFG_NONVRAM 0x40 /* ignore NVRAM */
#define ISP_CFG_FULL_DUPLEX 0x01 /* Full Duplex (Fibre Channel only) */
#define ISP_CFG_OWNWWN 0x02 /* override NVRAM wwn */
#define ISP_CFG_NPORT 0x04 /* try to force N- instead of L-Port */
#define ISP_FW_REV(maj, min, mic) ((maj << 24) | (min << 16) | mic)
#define ISP_FW_REVX(xp) ((xp[0]<<24) | (xp[1] << 16) | xp[2])
/*
* Bus (implementation) types
*/
#define ISP_BT_PCI 0 /* PCI Implementations */
#define ISP_BT_SBUS 1 /* SBus Implementations */
/*
* Chip Types
*/
#define ISP_HA_SCSI 0xf
#define ISP_HA_SCSI_UNKNOWN 0x1
#define ISP_HA_SCSI_1020 0x2
#define ISP_HA_SCSI_1020A 0x3
#define ISP_HA_SCSI_1040 0x4
#define ISP_HA_SCSI_1040A 0x5
#define ISP_HA_SCSI_1040B 0x6
#define ISP_HA_SCSI_1040C 0x7
#define ISP_HA_SCSI_1240 0x8
#define ISP_HA_SCSI_1080 0x9
#define ISP_HA_SCSI_1280 0xa
#define ISP_HA_SCSI_12160 0xb
#define ISP_HA_FC 0xf0
#define ISP_HA_FC_2100 0x10
#define ISP_HA_FC_2200 0x20
#define IS_SCSI(isp) (isp->isp_type & ISP_HA_SCSI)
#define IS_1240(isp) (isp->isp_type == ISP_HA_SCSI_1240)
#define IS_1080(isp) (isp->isp_type == ISP_HA_SCSI_1080)
#define IS_1280(isp) (isp->isp_type == ISP_HA_SCSI_1280)
#define IS_12160(isp) (isp->isp_type == ISP_HA_SCSI_12160)
#define IS_12X0(isp) (IS_1240(isp) || IS_1280(isp))
#define IS_DUALBUS(isp) (IS_12X0(isp) || IS_12160(isp))
#define IS_ULTRA2(isp) (IS_1080(isp) || IS_1280(isp) || IS_12160(isp))
#define IS_ULTRA3(isp) (IS_12160(isp))
#define IS_FC(isp) (isp->isp_type & ISP_HA_FC)
#define IS_2100(isp) (isp->isp_type == ISP_HA_FC_2100)
#define IS_2200(isp) (isp->isp_type == ISP_HA_FC_2200)
/*
* Function Prototypes
*/
/*
* Reset Hardware. Totally. Assumes that you'll follow this with
* a call to isp_init.
*/
void isp_reset __P((struct ispsoftc *));
/*
* Initialize Hardware to known state
*/
void isp_init __P((struct ispsoftc *));
/*
* Reset the ISP and call completion for any orphaned commands.
*/
void isp_restart __P((struct ispsoftc *));
/*
* Interrupt Service Routine
*/
int isp_intr __P((void *));
/*
* Command Entry Point
*/
int32_t ispscsicmd __P((ISP_SCSI_XFER_T *));
/*
* Platform Dependent to External to Internal Control Function
*
* Assumes all locks are held and that no reentrancy issues need be dealt with.
*
*/
typedef enum {
ISPCTL_RESET_BUS, /* Reset Bus */
ISPCTL_RESET_DEV, /* Reset Device */
ISPCTL_ABORT_CMD, /* Abort Command */
ISPCTL_UPDATE_PARAMS, /* Update Operating Parameters */
ISPCTL_FCLINK_TEST, /* Test FC Link Status */
ISPCTL_PDB_SYNC, /* Synchronize Port Database */
ISPCTL_TOGGLE_TMODE /* toggle target mode */
} ispctl_t;
int isp_control __P((struct ispsoftc *, ispctl_t, void *));
/*
* Platform Dependent to Internal to External Control Function
* (each platform must provide such a function)
*
* Assumes all locks are held and that no reentrancy issues need be dealt with.
*
*/
typedef enum {
ISPASYNC_NEW_TGT_PARAMS,
ISPASYNC_BUS_RESET, /* Bus Was Reset */
ISPASYNC_LOOP_DOWN, /* FC Loop Down */
ISPASYNC_LOOP_UP, /* FC Loop Up */
ISPASYNC_PDB_CHANGED, /* FC Port Data Base Changed */
ISPASYNC_CHANGE_NOTIFY, /* FC SNS Change Notification */
ISPASYNC_FABRIC_DEV, /* FC New Fabric Device */
ISPASYNC_TARGET_MESSAGE, /* target message */
ISPASYNC_TARGET_EVENT, /* target asynchronous event */
ISPASYNC_TARGET_ACTION /* other target command action */
} ispasync_t;
int isp_async __P((struct ispsoftc *, ispasync_t, void *));
/*
* lost command routine (XXXX IN TRANSITION XXXX)
*/
void isp_lostcmd __P((struct ispsoftc *, ISP_SCSI_XFER_T *));
#endif /* _ISPVAR_H */