freebsd-skq/sys/arm/broadcom/bcm2835/bcm2835_bscvar.h
gonzo 7990d1f04c [rpi] Add fdt_pinctrl(4) support to Raspberry Pi GPIO driver
On Raspberry Pi platform GPIO controller also responsible for pins
multiplexing. Pi code predates proper FDT support in FreeBSD so a
lot of pinmux info is hardcoded. This patch:

- Implements pinctl methods in bcm2835_gpio
- Converts all devices with ad-hoc pinmux info to proper pin control
  mechanisms and adds pinmux info in FreeBSD's custom dts files.
- Adds fdt_pinctrl option to RPI2 and RPI-B kernels
- Adds SPI pinmux config to FreeBSD's customization of GNU DTS.

Reviewed by:	imp, manu
Differential Revision:	https://reviews.freebsd.org/D14104
2018-04-08 00:56:19 +00:00

72 lines
2.4 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
* Copyright (c) 2013 Luiz Otavio O Souza <loos@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _BCM2835_BSCVAR_H
#define _BCM2835_BSCVAR_H
struct iic_msg;
struct bcm_bsc_softc {
device_t sc_dev;
device_t sc_iicbus;
struct mtx sc_mtx;
struct resource * sc_mem_res;
struct resource * sc_irq_res;
void * sc_intrhand;
struct iic_msg * sc_curmsg;
bus_space_tag_t sc_bst;
bus_space_handle_t sc_bsh;
int sc_debug;
uint16_t sc_replen;
uint16_t sc_totlen;
uint16_t sc_resid;
uint16_t sc_dlen;
uint8_t * sc_data;
uint8_t sc_flags;
};
#define BCM_I2C_BUSY 0x01
#define BCM_I2C_READ 0x02
#define BCM_I2C_ERROR 0x04
#define BCM_I2C_DONE 0x08
#define BCM_BSC_WRITE(_sc, _off, _val) \
bus_space_write_4((_sc)->sc_bst, (_sc)->sc_bsh, _off, _val)
#define BCM_BSC_READ(_sc, _off) \
bus_space_read_4((_sc)->sc_bst, (_sc)->sc_bsh, _off)
#define BCM_BSC_LOCK(_sc) \
mtx_lock(&(_sc)->sc_mtx)
#define BCM_BSC_UNLOCK(_sc) \
mtx_unlock(&(_sc)->sc_mtx)
#endif /* _BCM2835_BSCVAR_H_ */