a00d3e6140
returns okay when HW probe fails. This happens when comconsole flag is set but VGA console is used instead. Back out requested by: bde (He will be looking at other solutions from scratch)
423 lines
13 KiB
Groff
423 lines
13 KiB
Groff
.\" Copyright (c) 1990, 1991 The Regents of the University of California.
|
|
.\" All rights reserved.
|
|
.\"
|
|
.\" This code is derived from software contributed to Berkeley by
|
|
.\" the Systems Programming Group of the University of Utah Computer
|
|
.\" Science Department.
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions
|
|
.\" are met:
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
.\" 3. All advertising materials mentioning features or use of this software
|
|
.\" must display the following acknowledgement:
|
|
.\" This product includes software developed by the University of
|
|
.\" California, Berkeley and its contributors.
|
|
.\" 4. Neither the name of the University nor the names of its contributors
|
|
.\" may be used to endorse or promote products derived from this software
|
|
.\" without specific prior written permission.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
.\" SUCH DAMAGE.
|
|
.\"
|
|
.\" from: @(#)dca.4 5.2 (Berkeley) 3/27/91
|
|
.\" from: com.4,v 1.1 1993/08/06 11:19:07 cgd Exp
|
|
.\" $FreeBSD$
|
|
.\"
|
|
.Dd July 10, 2002
|
|
.Dt SIO 4
|
|
.Os
|
|
.Sh NAME
|
|
.Nm sio
|
|
.Nd "fast interrupt driven asynchronous serial communications interface"
|
|
.Sh SYNOPSIS
|
|
For standard ISA ports:
|
|
.Bd -ragged -offset indent -compact
|
|
.Cd "device sio"
|
|
.Pp
|
|
In
|
|
.Pa /boot/device.hints :
|
|
.Cd hint.sio.0.at="isa"
|
|
.Cd hint.sio.0.port="0x3f8"
|
|
.Cd hint.sio.0.flags="0x10"
|
|
.Cd hint.sio.0.irq="4"
|
|
.Cd hint.sio.1.at="isa"
|
|
.Cd hint.sio.1.port="0x2f8"
|
|
.Cd hint.sio.1.flags="0x0"
|
|
.Cd hint.sio.1.irq="3"
|
|
.Ed
|
|
.Pp
|
|
For AST compatible multiport cards with 4 ports:
|
|
.Bd -ragged -offset indent -compact
|
|
.Cd "options COM_MULTIPORT"
|
|
.Cd "device sio"
|
|
.Pp
|
|
In
|
|
.Pa /boot/device.hints :
|
|
.Cd hint.sio.4.at="isa"
|
|
.Cd hint.sio.4.port="0x2a0"
|
|
.Cd hint.sio.4.flags="0x701"
|
|
.Cd hint.sio.5.at="isa"
|
|
.Cd hint.sio.5.port="0x2a8"
|
|
.Cd hint.sio.5.flags="0x701"
|
|
.Cd hint.sio.6.at="isa"
|
|
.Cd hint.sio.6.port="0x2b0"
|
|
.Cd hint.sio.6.flags="0x701"
|
|
.Cd hint.sio.7.at="isa"
|
|
.Cd hint.sio.7.port="0x2b8"
|
|
.Cd hint.sio.7.flags="0x701"
|
|
.Cd hint.sio.7.irq="12"
|
|
.Ed
|
|
.Pp
|
|
For Boca Board compatible multiport cards with 8 ports:
|
|
.Bd -ragged -offset indent -compact
|
|
.Cd "options COM_MULTIPORT"
|
|
.Cd "device sio"
|
|
.Pp
|
|
In
|
|
.Pa /boot/device.hints :
|
|
.Cd hint.sio.4.at="isa"
|
|
.Cd hint.sio.4.port="0x100"
|
|
.Cd hint.sio.4.flags="0xb05"
|
|
.Cd "..."
|
|
.Cd hint.sio.11.at="isa"
|
|
.Cd hint.sio.11.port="0x138"
|
|
.Cd hint.sio.11.flags="0xb05"
|
|
.Cd hint.sio.11.irq="12"
|
|
.Ed
|
|
.Pp
|
|
For Netmos Nm9845 multiport cards with 6 ports:
|
|
.Bd -ragged -offset indent -compact
|
|
.Cd "options COM_MULTIPORT"
|
|
.Cd "device sio"
|
|
.Pp
|
|
In
|
|
.Pa /boot/device.hints :
|
|
.Cd hint.sio.4.at="isa"
|
|
.Cd hint.sio.4.port="0xb000"
|
|
.Cd hint.sio.4.flags="0x901"
|
|
.Cd hint.sio.5.at="isa"
|
|
.Cd hint.sio.5.port="0xb400"
|
|
.Cd hint.sio.5.flags="0x901"
|
|
.Cd hint.sio.6.at="isa"
|
|
.Cd hint.sio.6.port="0xb800"
|
|
.Cd hint.sio.6.flags="0x901"
|
|
.Cd hint.sio.7.at="isa"
|
|
.Cd hint.sio.7.port="0xbc00"
|
|
.Cd hint.sio.7.flags="0x901"
|
|
.Cd hint.sio.8.at="isa"
|
|
.Cd hint.sio.8.port="0xc000"
|
|
.Cd hint.sio.8.flags="0x901"
|
|
.Cd hint.sio.9.at="isa"
|
|
.Cd hint.sio.9.port="0xac00"
|
|
.Cd hint.sio.9.flags="0x901"
|
|
.Cd hint.sio.9.irq="12"
|
|
.Ed
|
|
.Pp
|
|
For Hayes ESP cards:
|
|
.Bd -ragged -offset indent -compact
|
|
.Cd "options COM_ESP"
|
|
.Cd "device sio"
|
|
.Cd "..."
|
|
.Ed
|
|
.Pp
|
|
For single port PCI and PCCARD cards:
|
|
.Bd -ragged -offset indent -compact
|
|
.Cd "device sio"
|
|
.Pp
|
|
No lines are required in
|
|
.Pa /boot/device.hints
|
|
for these cards.
|
|
.Ed
|
|
.Pp
|
|
For dual port PCI cards that share an interrupt:
|
|
.Bd -ragged -offset indent -compact
|
|
.Cd "device sio"
|
|
.Cd "options COM_MULTIPORT"
|
|
.Pp
|
|
In
|
|
.Pa /boot/device.hints :
|
|
.Cd hint.sio.2.flags="0x201"
|
|
.Cd hint.sio.3.flags="0x201"
|
|
.Ed
|
|
.Pp
|
|
Meaning of
|
|
.Ar flags :
|
|
.Bl -tag -offset indent -compact -width 0x000000
|
|
.It 0x00001
|
|
shared IRQs
|
|
.It 0x00002
|
|
disable FIFO
|
|
.It 0x00004
|
|
no AST/4 compatible IRQ control register
|
|
.It 0x00008
|
|
recover sooner from lost output interrupts
|
|
.It 0x00010
|
|
device is potential system console
|
|
.It 0x00020
|
|
device is forced to become system console
|
|
.It 0x00040
|
|
device is reserved for low-level IO (e. g. for remote kernel debugging)
|
|
.It 0x00080
|
|
use this port for remote kernel debugging
|
|
.It 0x0 Ns Em ?? Ns 00
|
|
minor number of master port
|
|
.It 0x10000
|
|
PPS timestamping on CTS instead of DCD
|
|
.It 0x20000
|
|
device is assumed to use a 16650A-type (extended FIFO) chip
|
|
.El
|
|
.Pp
|
|
Minor numbering:
|
|
.Bd -literal -offset indent -compact
|
|
0b\fIOLIMMMMM\fR
|
|
call\fBO\fRut
|
|
\fBL\fRock
|
|
\fBI\fRnitial
|
|
\fBMMMMM\fRinor
|
|
.Ed
|
|
.Sh DESCRIPTION
|
|
The
|
|
.Nm
|
|
driver provides support for NS8250-, NS16450-, NS16550 and NS16550A-based
|
|
.Tn EIA
|
|
.Tn RS-232C
|
|
.Pf ( Tn CCITT
|
|
.Tn V.24 )
|
|
communications interfaces.
|
|
The NS8250 and NS16450 have single character
|
|
buffers, the NS16550A has 16 character FIFO input and output buffers.
|
|
.Pp
|
|
Input and output for each line may set to one of following baud rates;
|
|
50, 75, 110, 134.5, 150, 300, 600, 1200, 1800, 2400, 4800, 9600,
|
|
19200, 28800, 38400, 57600, or 115200.
|
|
Your hardware may limit your baud rate choices.
|
|
.Pp
|
|
The driver supports `multiport' cards.
|
|
Multiport cards are those that have one or more groups of ports
|
|
that share an Interrupt Request (IRQ) line per group.
|
|
Shared IRQs on different cards are not supported.
|
|
Frequently 4 ports share 1 IRQ; some 8 port cards have 2 groups of 4 ports,
|
|
thus using 2 IRQs.
|
|
Some cards allow the first 2 serial ports to have separate IRQs per port
|
|
(as per DOS PC standard).
|
|
.Pp
|
|
Some cards have an IRQ control register for each group.
|
|
Some cards require special initialization related to such registers.
|
|
Only AST/4 compatible IRQ control registers are supported.
|
|
Some cards have an IRQ status register for each group.
|
|
The driver does not require or use such registers yet.
|
|
To work, the control and status registers for a group, if any,
|
|
must be mapped to the scratch register (register 7)
|
|
of a port in the group.
|
|
Such a port is called a
|
|
.Em master
|
|
port.
|
|
.Pp
|
|
The driver supports controller based PCI modems.
|
|
The 3Com FaxModem PCI and the Advantec 56k Voice Messaging PCI
|
|
FaxModem are the only cards supported.
|
|
WinModems, softmodems, hfc modems and any other modems that aren't
|
|
controller based are not supported.
|
|
.Pp
|
|
The
|
|
.Em flags
|
|
keyword may be used on each
|
|
.Em device sio
|
|
line in the kernel configuration file
|
|
to disable the FIFO on 16550A UARTs
|
|
(see the synopsis).
|
|
Disabling the FIFO should rarely be necessary.
|
|
.Pp
|
|
The
|
|
.Em flags
|
|
keyword
|
|
.Em must
|
|
be used for all ports that are part of an IRQ sharing group.
|
|
One bit specifies IRQ sharing; another bit specifies whether the port does
|
|
.Em not
|
|
require AST/4 compatible initialization.
|
|
The minor number of the device corresponding a master port
|
|
for the group is encoded as a bitfield in the high byte.
|
|
The same master port must be specified for all ports in a group.
|
|
.Pp
|
|
The
|
|
.Em irq
|
|
specification must be given for master ports
|
|
and for ports that are not part of an IRQ sharing group,
|
|
and not for other ports.
|
|
.Pp
|
|
In the synopsis,
|
|
.Em flags 0x701
|
|
means that the 8th port (sio7) is the master
|
|
port, and that the port is on a multiport card with shared IRQs
|
|
and an AST/4 compatible IRQ control register.
|
|
.Pp
|
|
.Em flags 0xb05
|
|
means that the 12th port (sio11) is the master
|
|
port, and that the port is on a multiport card with shared IRQs
|
|
and no special IRQ control register.
|
|
.Pp
|
|
Which port is the master port depends on the card type.
|
|
Consult the hardware documentation of your card.
|
|
Since IRQ status registers are never used,
|
|
and IRQ control registers are only used for AST/4 compatible cards,
|
|
and some cards map the control/status registers to all ports in a group,
|
|
any port in a group will sometimes do for the master port.
|
|
Choose a port containing an IRQ status register for forwards compatibility,
|
|
and the highest possible port for consistency.
|
|
.Pp
|
|
Serial ports controlled by the
|
|
.Nm
|
|
driver can be used for both `callin' and `callout'.
|
|
For each port there is a callin device and a callout device.
|
|
The minor number of the callout device is 128 higher
|
|
than that of the corresponding callin port.
|
|
The callin device is general purpose.
|
|
Processes opening it normally wait for carrier
|
|
and for the callout device to become inactive.
|
|
The callout device is used to steal the port from
|
|
processes waiting for carrier on the callin device.
|
|
Processes opening it do not wait for carrier
|
|
and put any processes waiting for carrier on the callin device into
|
|
a deeper sleep so that they do not conflict with the callout session.
|
|
The callout device is abused for handling programs that are supposed
|
|
to work on general ports and need to open the port without waiting
|
|
but are too stupid to do so.
|
|
.Pp
|
|
The
|
|
.Nm
|
|
driver also supports an initial-state and a lock-state control
|
|
device for each of the callin and the callout "data" devices.
|
|
The minor number of the initial-state device is 32 higher
|
|
than that of the corresponding data device.
|
|
The minor number of the lock-state device is 64 higher
|
|
than that of the corresponding data device.
|
|
The termios settings of a data device are copied
|
|
from those of the corresponding initial-state device
|
|
on first opens and are not inherited from previous opens.
|
|
Use
|
|
.Xr stty 1
|
|
in the normal way on the initial-state devices to program
|
|
initial termios states suitable for your setup.
|
|
.Pp
|
|
The lock termios state acts as flags to disable changing
|
|
the termios state.
|
|
E.g., to lock a flag variable such as CRTSCTS, use
|
|
.Em stty crtscts
|
|
on the lock-state device.
|
|
Speeds and special characters
|
|
may be locked by setting the corresponding value in the lock-state
|
|
device to any nonzero value.
|
|
.Pp
|
|
Correct programs talking to correctly wired external devices
|
|
work with almost arbitrary initial states and almost no locking,
|
|
but other setups may benefit from changing some of the default
|
|
initial state and locking the state.
|
|
In particular, the initial states for non (POSIX) standard flags
|
|
should be set to suit the devices attached and may need to be
|
|
locked to prevent buggy programs from changing them.
|
|
E.g., CRTSCTS should be locked on for devices that support
|
|
RTS/CTS handshaking at all times and off for devices that don't
|
|
support it at all.
|
|
CLOCAL should be locked on for devices that don't support carrier.
|
|
HUPCL may be locked off if you don't
|
|
want to hang up for some reason.
|
|
In general, very bad things happen
|
|
if something is locked to the wrong state, and things should not
|
|
be locked for devices that support more than one setting.
|
|
The CLOCAL flag on callin ports should be locked off for logins
|
|
to avoid certain security holes, but this needs to be done by
|
|
getty if the callin port is used for anything else.
|
|
.Sh FILES
|
|
.Bl -tag -width /dev/ttyid? -compact
|
|
.It Pa /dev/ttyd?
|
|
for callin ports
|
|
.It Pa /dev/ttyid?
|
|
.It Pa /dev/ttyld?
|
|
corresponding callin initial-state and lock-state devices
|
|
.Pp
|
|
.It Pa /dev/cuaa?
|
|
for callout ports
|
|
.It Pa /dev/cuaia?
|
|
.It Pa /dev/cuala?
|
|
corresponding callout initial-state and lock-state devices
|
|
.El
|
|
.Pp
|
|
.Bl -tag -width /etc/rc.serial -compact
|
|
.It Pa /etc/rc.serial
|
|
examples of setting the initial-state and lock-state devices
|
|
.El
|
|
.Pp
|
|
The device numbers are made from the set [0-9a-v] so that more than
|
|
10 ports can be supported.
|
|
.Sh DIAGNOSTICS
|
|
.Bl -diag
|
|
.It sio%d: silo overflow.
|
|
Problem in the interrupt handler.
|
|
.El
|
|
.Bl -diag
|
|
.It sio%d: interrupt-level buffer overflow.
|
|
Problem in the bottom half of the driver.
|
|
.El
|
|
.Bl -diag
|
|
.It sio%d: tty-level buffer overflow.
|
|
Problem in the application.
|
|
Input has arrived faster than the given module could process it
|
|
and some has been lost.
|
|
.El
|
|
.\" .Bl -diag
|
|
.\" .It sio%d: reduced fifo trigger level to %d.
|
|
.\" Attempting to avoid further silo overflows.
|
|
.\" .El
|
|
.Sh SEE ALSO
|
|
.Xr stty 1 ,
|
|
.Xr termios 4 ,
|
|
.Xr tty 4 ,
|
|
.Xr comcontrol 8
|
|
.Sh HISTORY
|
|
The
|
|
.Nm
|
|
driver is derived from the
|
|
.Tn HP9000/300
|
|
.Xr dca 4
|
|
driver and is
|
|
.Ud
|
|
.Sh BUGS
|
|
Data loss may occur at very high baud rates on slow systems,
|
|
or with too many ports on any system,
|
|
or on heavily loaded systems when crtscts cannot be used.
|
|
The use of NS16550A's reduces system load and helps to avoid data loss.
|
|
.Pp
|
|
Stay away from plain NS16550's.
|
|
These are early implementations of the chip with non-functional FIFO hardware.
|
|
.Pp
|
|
The constants which define the locations
|
|
of the various serial ports are holdovers from
|
|
.Tn DOS .
|
|
As shown, hex addresses can be and for clarity probably should be used instead.
|
|
.Pp
|
|
Note that on the AST/4 the card's dipswitches should
|
|
.Em not
|
|
be set to use interrupt sharing.
|
|
AST/4-like interrupt sharing is only used when
|
|
.Em multiple
|
|
AST/4 cards are installed in the same system.
|
|
The
|
|
.Nm
|
|
driver does not support more than 1 AST/4 on one IRQ.
|
|
.Pp
|
|
The examples in the synopsis are too vendor-specific.
|