freebsd-skq/sys/mips/nlm/board.h
jchandra 126e29ce5f XLP UART code udpate.
Move XLP PCI UART device to sys/mips/nlm/dev/ directory.  Other
drivers for the XLP SoC devices will be added here as well.
Update uart_cpu_xlp.c and uart_pci_xlp.c use macros for uart port,
speed and IO frequency.
2012-03-27 14:48:40 +00:00

157 lines
4.0 KiB
C

/*-
* Copyright 2003-2011 Netlogic Microsystems (Netlogic). All rights
* reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY Netlogic Microsystems ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* NETLOGIC_BSD
* $FreeBSD$
*/
#ifndef __NLM_BOARD_H__
#define __NLM_BOARD_H__
#define XLP_NAE_NBLOCKS 5
#define XLP_NAE_NPORTS 4
/*
* EVP board EEPROM info
*/
#define EEPROM_I2CBUS 1
#define EEPROM_I2CADDR 0xAE
#define EEPROM_SIZE 48
#define EEPROM_MACADDR_OFFSET 2
/* used if there is no FDT */
#define BOARD_CONSOLE_SPEED 115200
#define BOARD_CONSOLE_UART 0
/*
* EVP board CPLD chip select and daughter card info field
*/
#define XLP_EVB_CPLD_CHIPSELECT 2
#define DCARD_ILAKEN 0x0
#define DCARD_SGMII 0x1
#define DCARD_XAUI 0x2
#define DCARD_NOT_PRSNT 0x3
#if !defined(LOCORE) && !defined(__ASSEMBLY__)
/*
* NAE configuration
*/
struct xlp_port_ivars {
int port;
int block;
int node;
int type;
int phy_addr;
int mdio_bus;
int loopback_mode;
int num_channels;
int free_desc_sizes;
int num_free_descs;
int pseq_fifo_size;
int iface_fifo_size;
int rxbuf_size;
int rx_slots_reqd;
int tx_slots_reqd;
int vlan_pri_en;
int stg2_fifo_size;
int eh_fifo_size;
int frout_fifo_size;
int ms_fifo_size;
int pkt_fifo_size;
int pktlen_fifo_size;
int max_stg2_offset;
int max_eh_offset;
int max_frout_offset;
int max_ms_offset;
int max_pmem_offset;
int stg1_2_credit;
int stg2_eh_credit;
int stg2_frout_credit;
int stg2_ms_credit;
int hw_parser_en;
u_int ieee1588_inc_intg;
u_int ieee1588_inc_den;
u_int ieee1588_inc_num;
uint64_t ieee1588_userval;
uint64_t ieee1588_ptpoff;
uint64_t ieee1588_tmr1;
uint64_t ieee1588_tmr2;
uint64_t ieee1588_tmr3;
};
struct xlp_block_ivars {
int block;
int type;
u_int portmask;
struct xlp_port_ivars port_ivars[XLP_NAE_NPORTS];
};
struct xlp_nae_ivars {
int node;
int nblocks;
u_int blockmask;
u_int xauimask;
u_int sgmiimask;
int freq;
u_int flow_crc_poly;
u_int hw_parser_en;
u_int prepad_en;
u_int prepad_size; /* size in 16 byte units */
u_int ieee_1588_en;
struct xlp_block_ivars block_ivars[XLP_NAE_NBLOCKS];
};
struct xlp_board_info {
u_int nodemask;
struct xlp_node_info {
struct xlp_nae_ivars nae_ivars;
} nodes[XLP_MAX_NODES];
};
extern struct xlp_board_info xlp_board_info;
/* Network configuration */
int nlm_get_vfbid_mapping(int);
int nlm_get_poe_distvec(int vec, uint32_t *distvec);
void xlpge_get_macaddr(uint8_t *macaddr);
int nlm_board_info_setup(void);
/* EEPROM & CPLD */
int nlm_board_eeprom_read(int node, int i2cbus, int addr, int offs,
uint8_t *buf,int sz);
uint64_t nlm_board_cpld_base(int node, int chipselect);
int nlm_board_cpld_majorversion(uint64_t cpldbase);
int nlm_board_cpld_minorversion(uint64_t cpldbase);
void nlm_board_cpld_reset(uint64_t cpldbase);
int nlm_board_cpld_dboard_type(uint64_t cpldbase, int slot);
#endif
#endif