3dc9275fe3
library: o) Increase inline unit / large function growth limits for MIPS to accommodate the needs of the Simple Executive, which uses a shocking amount of inlining. o) Remove TARGET_OCTEON and use CPU_CNMIPS to do things required by cnMIPS and the Octeon SoC. o) Add OCTEON_VENDOR_LANNER to use Lanner's allocation of vendor-specific board numbers, specifically to support the MR320. o) Add OCTEON_BOARD_CAPK_0100ND to hard-wire configuration for the CAPK-0100nd, which improperly uses an evaluation board's board number and breaks board detection at runtime. This board is sold by Portwell as the CAM-0100. o) Add support for the RTC available on some Octeon boards. o) Add support for the Octeon PCI bus. Note that rman_[sg]et_virtual for IO ports can not work unless building for n64. o) Clean up the CompactFlash driver to use Simple Executive macros and structures where possible (it would be advisable to use the Simple Executive API to set the PIO mode, too, but that is not done presently.) Also use structures from FreeBSD's ATA layer rather than structures copied from Linux. o) Print available Octeon SoC features on boot. o) Add support for the Octeon timecounter. o) Use the Simple Executive's routines rather than local copies for doing reads and writes to 64-bit addresses and use its macros for various device addresses rather than using local copies. o) Rename octeon_board_real to octeon_is_simulation to reduce differences with Cavium-provided code originally written for Linux. Also make it use the same simplified test that the Simple Executive and Linux both use rather than our complex one. o) Add support for the Octeon CIU, which is the main interrupt unit, as a bus to use normal interrupt allocation and setup routines. o) Use the Simple Executive's bootmem facility to allocate physical memory for the kernel, rather than assuming we know which addresses we can steal. NB: This may reduce the amount of RAM the kernel reports you as having if you are leaving large temporary allocations made by U-Boot allocated when starting FreeBSD. o) Add a port of the Cavium-provided Ethernet driver for Linux. This changes Ethernet interface naming from rgmxN to octeN. The new driver has vast improvements over the old one, both in performance and functionality, but does still have some features which have not been ported entirely and there may be unimplemented code that can be hit in everyday use. I will make every effort to correct those as they are reported. o) Support loading the kernel on non-contiguous cores. o) Add very conservative support for harvesting randomness from the Octeon random number device. o) Turn SMP on by default. o) Clean up the style of the Octeon kernel configurations a little and make them compile with -march=octeon. o) Add support for the Lanner MR320 and the CAPK-0100nd to the Simple Executive. o) Modify the Simple Executive to build on FreeBSD and to build without executive-config.h or cvmx-config.h. In the future we may want to revert part of these changes and supply executive-config.h and cvmx-config.h and access to the options contained in those files via kernel configuration files. o) Modify the Simple Executive USB routines to support getting and setting of the USB PID.
403 lines
9.6 KiB
C
403 lines
9.6 KiB
C
/*-
|
|
* Copyright (c) 2010 Juli Mallett <jmallett@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/bus.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/interrupt.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
#include <vm/vm_extern.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/cpu.h>
|
|
#include <machine/pmap.h>
|
|
|
|
#include <contrib/octeon-sdk/cvmx.h>
|
|
#include <contrib/octeon-sdk/cvmx-interrupt.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <dev/pci/pcib_private.h>
|
|
|
|
#include <mips/cavium/octopcireg.h>
|
|
#include <mips/cavium/octopcivar.h>
|
|
|
|
#include "pcib_if.h"
|
|
|
|
struct octopci_softc {
|
|
device_t sc_dev;
|
|
|
|
unsigned sc_domain;
|
|
unsigned sc_bus;
|
|
|
|
struct rman sc_io;
|
|
struct rman sc_mem1;
|
|
};
|
|
|
|
static void octopci_identify(driver_t *, device_t);
|
|
static int octopci_probe(device_t);
|
|
static int octopci_attach(device_t);
|
|
static int octopci_read_ivar(device_t, device_t, int,
|
|
uintptr_t *);
|
|
static struct resource *octopci_alloc_resource(device_t, device_t, int, int *,
|
|
u_long, u_long, u_long, u_int);
|
|
static int octopci_activate_resource(device_t, device_t, int, int,
|
|
struct resource *);
|
|
static int octopci_maxslots(device_t);
|
|
static uint32_t octopci_read_config(device_t, u_int, u_int, u_int, u_int, int);
|
|
static void octopci_write_config(device_t, u_int, u_int, u_int, u_int,
|
|
uint32_t, int);
|
|
static int octopci_route_interrupt(device_t, device_t, int);
|
|
|
|
static uint64_t octopci_cs_addr(unsigned, unsigned, unsigned, unsigned);
|
|
|
|
static void
|
|
octopci_identify(driver_t *drv, device_t parent)
|
|
{
|
|
BUS_ADD_CHILD(parent, 0, "pcib", 0);
|
|
}
|
|
|
|
static int
|
|
octopci_probe(device_t dev)
|
|
{
|
|
if (device_get_unit(dev) != 0)
|
|
return (ENXIO);
|
|
/* XXX Check sysinfo flag. */
|
|
device_set_desc(dev, "Cavium Octeon PCI bridge");
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
octopci_attach(device_t dev)
|
|
{
|
|
struct octopci_softc *sc;
|
|
int error;
|
|
|
|
/*
|
|
* XXX
|
|
* We currently rely on U-Boot to set up the PCI in host state. We
|
|
* should properly initialize the PCI bus here.
|
|
*/
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->sc_dev = dev;
|
|
sc->sc_domain = 0;
|
|
sc->sc_bus = 0;
|
|
|
|
sc->sc_io.rm_type = RMAN_ARRAY;
|
|
sc->sc_io.rm_descr = "Cavium Octeon PCI I/O Ports";
|
|
error = rman_init(&sc->sc_io);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
error = rman_manage_region(&sc->sc_io, CVMX_OCT_PCI_IO_BASE,
|
|
CVMX_OCT_PCI_IO_BASE + CVMX_OCT_PCI_IO_SIZE);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
sc->sc_mem1.rm_type = RMAN_ARRAY;
|
|
sc->sc_mem1.rm_descr = "Cavium Octeon PCI Memory";
|
|
error = rman_init(&sc->sc_mem1);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
error = rman_manage_region(&sc->sc_mem1, CVMX_OCT_PCI_MEM1_BASE,
|
|
CVMX_OCT_PCI_MEM1_BASE + CVMX_OCT_PCI_MEM1_SIZE);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
device_add_child(dev, "pci", 0);
|
|
|
|
return (bus_generic_attach(dev));
|
|
}
|
|
|
|
static int
|
|
octopci_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
|
|
{
|
|
struct octopci_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
switch (which) {
|
|
case PCIB_IVAR_DOMAIN:
|
|
*result = sc->sc_domain;
|
|
return (0);
|
|
case PCIB_IVAR_BUS:
|
|
*result = sc->sc_bus;
|
|
return (0);
|
|
|
|
}
|
|
return (ENOENT);
|
|
}
|
|
|
|
static struct resource *
|
|
octopci_alloc_resource(device_t bus, device_t child, int type, int *rid,
|
|
u_long start, u_long end, u_long count, u_int flags)
|
|
{
|
|
struct octopci_softc *sc;
|
|
struct resource *res;
|
|
struct rman *rm;
|
|
int error;
|
|
|
|
sc = device_get_softc(bus);
|
|
|
|
switch (type) {
|
|
case SYS_RES_IRQ:
|
|
res = bus_generic_alloc_resource(bus, child, type, rid, start,
|
|
end, count, flags);
|
|
if (res != NULL)
|
|
return (res);
|
|
return (NULL);
|
|
case SYS_RES_MEMORY:
|
|
rm = &sc->sc_mem1;
|
|
break;
|
|
case SYS_RES_IOPORT:
|
|
rm = &sc->sc_io;
|
|
break;
|
|
default:
|
|
return (NULL);
|
|
}
|
|
|
|
res = rman_reserve_resource(rm, start, end, count, flags, child);
|
|
if (res == NULL)
|
|
return (NULL);
|
|
|
|
rman_set_rid(res, *rid);
|
|
rman_set_bustag(res, octopci_bus_space);
|
|
|
|
switch (type) {
|
|
case SYS_RES_MEMORY:
|
|
rman_set_bushandle(res, CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI, CVMX_OCT_SUBDID_PCI_MEM1)) + rman_get_start(res));
|
|
break;
|
|
case SYS_RES_IOPORT:
|
|
rman_set_bushandle(res, CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI, CVMX_OCT_SUBDID_PCI_IO)) + rman_get_start(res));
|
|
/*
|
|
* XXX
|
|
* We should just disallow use of io ports on !n64 since without
|
|
* 64-bit PTEs we can't even do a 32-bit virtual address
|
|
* mapped to them.
|
|
*/
|
|
#if 0
|
|
rman_set_virtual(res, (void *)rman_get_bushandle(res));
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
if ((flags & RF_ACTIVE) != 0) {
|
|
error = bus_activate_resource(child, type, *rid, res);
|
|
if (error != 0) {
|
|
rman_release_resource(res);
|
|
return (NULL);
|
|
}
|
|
}
|
|
|
|
return (res);
|
|
}
|
|
|
|
static int
|
|
octopci_activate_resource(device_t bus, device_t child, int type, int rid,
|
|
struct resource *res)
|
|
{
|
|
bus_space_handle_t bh;
|
|
int error;
|
|
|
|
switch (type) {
|
|
case SYS_RES_IRQ:
|
|
error = bus_generic_activate_resource(bus, child, type, rid,
|
|
res);
|
|
if (error != 0)
|
|
return (error);
|
|
return (0);
|
|
case SYS_RES_MEMORY:
|
|
case SYS_RES_IOPORT:
|
|
error = bus_space_map(rman_get_bustag(res),
|
|
rman_get_bushandle(res), rman_get_size(res), 0, &bh);
|
|
if (error != 0)
|
|
return (error);
|
|
rman_set_bushandle(res, bh);
|
|
break;
|
|
default:
|
|
return (ENXIO);
|
|
}
|
|
|
|
error = rman_activate_resource(res);
|
|
if (error != 0)
|
|
return (error);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
octopci_maxslots(device_t dev)
|
|
{
|
|
return (PCI_SLOTMAX);
|
|
}
|
|
|
|
static uint32_t
|
|
octopci_read_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg,
|
|
int bytes)
|
|
{
|
|
struct octopci_softc *sc;
|
|
uint64_t addr;
|
|
uint32_t data;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
addr = octopci_cs_addr(bus, slot, func, reg);
|
|
|
|
switch (bytes) {
|
|
case 4:
|
|
data = le32toh(cvmx_read64_uint32(addr));
|
|
return (data);
|
|
case 2:
|
|
data = le16toh(cvmx_read64_uint16(addr));
|
|
return (data);
|
|
case 1:
|
|
data = cvmx_read64_uint8(addr);
|
|
return (data);
|
|
default:
|
|
return ((uint32_t)-1);
|
|
}
|
|
}
|
|
|
|
static void
|
|
octopci_write_config(device_t dev, u_int bus, u_int slot, u_int func,
|
|
u_int reg, uint32_t data, int bytes)
|
|
{
|
|
struct octopci_softc *sc;
|
|
uint64_t addr;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
addr = octopci_cs_addr(bus, slot, func, reg);
|
|
|
|
switch (bytes) {
|
|
case 4:
|
|
cvmx_write64_uint32(addr, htole32(data));
|
|
return;
|
|
case 2:
|
|
cvmx_write64_uint16(addr, htole16(data));
|
|
return;
|
|
case 1:
|
|
cvmx_write64_uint8(addr, data);
|
|
return;
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
|
|
static int
|
|
octopci_route_interrupt(device_t dev, device_t child, int pin)
|
|
{
|
|
struct octopci_softc *sc;
|
|
unsigned bus, slot, func;
|
|
unsigned irq;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
bus = pci_get_bus(child);
|
|
slot = pci_get_slot(child);
|
|
func = pci_get_function(child);
|
|
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
if (slot < 32) {
|
|
if (slot == 3 || slot == 9)
|
|
irq = pin;
|
|
else
|
|
irq = pin - 1;
|
|
return (CVMX_IRQ_PCI_INT0 + (irq & 3));
|
|
}
|
|
#endif
|
|
|
|
irq = slot + pin - 3;
|
|
|
|
return (CVMX_IRQ_PCI_INT0 + (irq & 3));
|
|
}
|
|
|
|
static uint64_t
|
|
octopci_cs_addr(unsigned bus, unsigned slot, unsigned func, unsigned reg)
|
|
{
|
|
octeon_pci_config_space_address_t pci_addr;
|
|
|
|
pci_addr.u64 = 0;
|
|
pci_addr.s.upper = 2;
|
|
pci_addr.s.io = 1;
|
|
pci_addr.s.did = 3;
|
|
pci_addr.s.subdid = CVMX_OCT_SUBDID_PCI_CFG;
|
|
pci_addr.s.endian_swap = 1;
|
|
pci_addr.s.bus = bus;
|
|
pci_addr.s.dev = slot;
|
|
pci_addr.s.func = func;
|
|
pci_addr.s.reg = reg;
|
|
|
|
return (pci_addr.u64);
|
|
}
|
|
|
|
static device_method_t octopci_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_identify, octopci_identify),
|
|
DEVMETHOD(device_probe, octopci_probe),
|
|
DEVMETHOD(device_attach, octopci_attach),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_read_ivar, octopci_read_ivar),
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_alloc_resource, octopci_alloc_resource),
|
|
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
|
|
DEVMETHOD(bus_activate_resource,octopci_activate_resource),
|
|
DEVMETHOD(bus_deactivate_resource,bus_generic_deactivate_resource),
|
|
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
|
|
|
|
/* pcib interface */
|
|
DEVMETHOD(pcib_maxslots, octopci_maxslots),
|
|
DEVMETHOD(pcib_read_config, octopci_read_config),
|
|
DEVMETHOD(pcib_write_config, octopci_write_config),
|
|
DEVMETHOD(pcib_route_interrupt, octopci_route_interrupt),
|
|
|
|
{0, 0}
|
|
};
|
|
|
|
static driver_t octopci_driver = {
|
|
"pcib",
|
|
octopci_methods,
|
|
sizeof(struct octopci_softc),
|
|
};
|
|
static devclass_t octopci_devclass;
|
|
DRIVER_MODULE(octopci, ciu, octopci_driver, octopci_devclass, 0, 0);
|