freebsd-skq/sys/gnu/i386/fpemul/reg_u_div.s
2002-05-13 12:55:30 +00:00

502 lines
13 KiB
ArmAsm

.file "reg_u_div.S"
/*
* reg_u_div.S
*
* Core division routines
*
*
* Copyright (C) 1992,1993,1994
* W. Metzenthen, 22 Parker St, Ormond, Vic 3163,
* Australia. E-mail billm@vaxc.cc.monash.edu.au
* All rights reserved.
*
* This copyright notice covers the redistribution and use of the
* FPU emulator developed by W. Metzenthen. It covers only its use
* in the 386BSD, FreeBSD and NetBSD operating systems. Any other
* use is not permitted under this copyright.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must include information specifying
* that source code for the emulator is freely available and include
* either:
* a) an offer to provide the source code for a nominal distribution
* fee, or
* b) list at least two alternative methods whereby the source
* can be obtained, e.g. a publically accessible bulletin board
* and an anonymous ftp site from which the software can be
* downloaded.
* 3. All advertising materials specifically mentioning features or use of
* this emulator must acknowledge that it was developed by W. Metzenthen.
* 4. The name of W. Metzenthen may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* W. METZENTHEN BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
* The purpose of this copyright, based upon the Berkeley copyright, is to
* ensure that the covered software remains freely available to everyone.
*
* The software (with necessary differences) is also available, but under
* the terms of the GNU copyleft, for the Linux operating system and for
* the djgpp ms-dos extender.
*
* W. Metzenthen June 1994.
*
*
* $FreeBSD$
*
*/
/*---------------------------------------------------------------------------+
| Kernel for the division routines. |
| |
| void reg_u_div(FPU_REG *a, FPU_REG *a, |
| FPU_REG *dest, unsigned int control_word) |
| |
| Does not compute the destination exponent, but does adjust it. |
+---------------------------------------------------------------------------*/
#include <gnu/i386/fpemul/fpu_asm.h>
/* #define dSIGL(x) (x) */
/* #define dSIGH(x) 4(x) */
.data
/*
Local storage:
Result: accum_3:accum_2:accum_1:accum_0
Overflow flag: ovfl_flag
*/
ALIGN_DATA
accum_3:
.long 0
accum_2:
.long 0
accum_1:
.long 0
accum_0:
.long 0
result_1:
.long 0
result_2:
.long 0
ovfl_flag:
.byte 0
.text
.globl divide_kernel
ENTRY(reg_u_div)
pushl %ebp
movl %esp,%ebp
pushl %esi
pushl %edi
pushl %ebx
movl PARAM1,%esi /* pointer to num */
movl PARAM2,%ebx /* pointer to denom */
movl PARAM3,%edi /* pointer to answer */
#ifdef DENORM_OPERAND
movl EXP(%esi),%eax
cmpl EXP_UNDER,%eax
jg xOp1_not_denorm
call denormal_operand
orl %eax,%eax
jnz FPU_Arith_exit
xOp1_not_denorm:
movl EXP(%ebx),%eax
cmpl EXP_UNDER,%eax
jg xOp2_not_denorm
call denormal_operand
orl %eax,%eax
jnz FPU_Arith_exit
xOp2_not_denorm:
#endif /* DENORM_OPERAND */
divide_kernel:
#ifdef PARANOID
/* testl $0x80000000, SIGH(%esi) *//* Dividend */
/* je L_bugged */
testl $0x80000000, SIGH(%ebx) /* Divisor*/
je L_bugged
#endif /* PARANOID */
/* Check if the divisor can be treated as having just 32 bits */
cmpl $0,SIGL(%ebx)
jnz L_Full_Division /* Can't do a quick divide */
/* We should be able to zip through the division here */
movl SIGH(%ebx),%ecx /* The divisor */
movl SIGH(%esi),%edx /* Dividend */
movl SIGL(%esi),%eax /* Dividend */
cmpl %ecx,%edx
setaeb ovfl_flag /* Keep a record */
jb L_no_adjust
subl %ecx,%edx /* Prevent the overflow */
L_no_adjust:
/* Divide the 64 bit number by the 32 bit denominator */
divl %ecx
movl %eax,result_2
/* Work on the remainder of the first division */
xorl %eax,%eax
divl %ecx
movl %eax,result_1
/* Work on the remainder of the 64 bit division */
xorl %eax,%eax
divl %ecx
testb $255,ovfl_flag /* was the num > denom ? */
je L_no_overflow
/* Do the shifting here */
/* increase the exponent */
incl EXP(%edi)
/* shift the mantissa right one bit */
stc /* To set the ms bit */
rcrl result_2
rcrl result_1
rcrl %eax
L_no_overflow:
jmp LRound_precision /* Do the rounding as required*/
/*---------------------------------------------------------------------------+
| Divide: Return arg1/arg2 to arg3. |
| |
| This routine does not use the exponents of arg1 and arg2, but does |
| adjust the exponent of arg3. |
| |
| The maximum returned value is (ignoring exponents) |
| .ffffffff ffffffff |
| ------------------ = 1.ffffffff fffffffe |
| .80000000 00000000 |
| and the minimum is |
| .80000000 00000000 |
| ------------------ = .80000000 00000001 (rounded) |
| .ffffffff ffffffff |
| |
+---------------------------------------------------------------------------*/
L_Full_Division:
/* Save extended dividend in local register*/
movl SIGL(%esi),%eax
movl %eax,accum_2
movl SIGH(%esi),%eax
movl %eax,accum_3
xorl %eax,%eax
movl %eax,accum_1 /* zero the extension */
movl %eax,accum_0 /* zero the extension */
movl SIGL(%esi),%eax /* Get the current num */
movl SIGH(%esi),%edx
/*----------------------------------------------------------------------*/
/* Initialization done */
/* Do the first 32 bits */
movb $0,ovfl_flag
cmpl SIGH(%ebx),%edx /* Test for imminent overflow */
jb LLess_than_1
ja LGreater_than_1
cmpl SIGL(%ebx),%eax
jb LLess_than_1
LGreater_than_1:
/* The dividend is greater or equal, would cause overflow */
setaeb ovfl_flag /* Keep a record */
subl SIGL(%ebx),%eax
sbbl SIGH(%ebx),%edx /* Prevent the overflow */
movl %eax,accum_2
movl %edx,accum_3
LLess_than_1:
/* At this point, we have a dividend < divisor, with a record of
adjustment in ovfl_flag */
/* We will divide by a number which is too large */
movl SIGH(%ebx),%ecx
addl $1,%ecx
jnc LFirst_div_not_1
/* here we need to divide by 100000000h,
i.e., no division at all.. */
mov %edx,%eax
jmp LFirst_div_done
LFirst_div_not_1:
divl %ecx /* Divide the numerator by the augmented
denom ms dw */
LFirst_div_done:
movl %eax,result_2 /* Put the result in the answer */
mull SIGH(%ebx) /* mul by the ms dw of the denom */
subl %eax,accum_2 /* Subtract from the num local reg */
sbbl %edx,accum_3
movl result_2,%eax /* Get the result back */
mull SIGL(%ebx) /* now mul the ls dw of the denom */
subl %eax,accum_1 /* Subtract from the num local reg */
sbbl %edx,accum_2
sbbl $0,accum_3
je LDo_2nd_32_bits /* Must check for non-zero result here */
#ifdef PARANOID
jb L_bugged_1
#endif /* PARANOID */
/* need to subtract another once of the denom */
incl result_2 /* Correct the answer */
movl SIGL(%ebx),%eax
movl SIGH(%ebx),%edx
subl %eax,accum_1 /* Subtract from the num local reg */
sbbl %edx,accum_2
#ifdef PARANOID
sbbl $0,accum_3
jne L_bugged_1 /* Must check for non-zero result here */
#endif /* PARANOID */
/*----------------------------------------------------------------------*/
/* Half of the main problem is done, there is just a reduced numerator
to handle now */
/* Work with the second 32 bits, accum_0 not used from now on */
LDo_2nd_32_bits:
movl accum_2,%edx /* get the reduced num */
movl accum_1,%eax
/* need to check for possible subsequent overflow */
cmpl SIGH(%ebx),%edx
jb LDo_2nd_div
ja LPrevent_2nd_overflow
cmpl SIGL(%ebx),%eax
jb LDo_2nd_div
LPrevent_2nd_overflow:
/* The numerator is greater or equal, would cause overflow */
/* prevent overflow */
subl SIGL(%ebx),%eax
sbbl SIGH(%ebx),%edx
movl %edx,accum_2
movl %eax,accum_1
incl result_2 /* Reflect the subtraction in the answer */
#ifdef PARANOID
je L_bugged_2 /* Can't bump the result to 1.0 */
#endif /* PARANOID */
LDo_2nd_div:
cmpl $0,%ecx /* augmented denom msw*/
jnz LSecond_div_not_1
/* %ecx == 0, we are dividing by 1.0 */
mov %edx,%eax
jmp LSecond_div_done
LSecond_div_not_1:
divl %ecx /* Divide the numerator by the denom ms dw */
LSecond_div_done:
movl %eax,result_1 /* Put the result in the answer */
mull SIGH(%ebx) /* mul by the ms dw of the denom */
subl %eax,accum_1 /* Subtract from the num local reg */
sbbl %edx,accum_2
#ifdef PARANOID
jc L_bugged_2
#endif /* PARANOID */
movl result_1,%eax /* Get the result back */
mull SIGL(%ebx) /* now mul the ls dw of the denom */
subl %eax,accum_0 /* Subtract from the num local reg */
sbbl %edx,accum_1 /* Subtract from the num local reg */
sbbl $0,accum_2
#ifdef PARANOID
jc L_bugged_2
#endif /* PARANOID */
jz LDo_3rd_32_bits
#ifdef PARANOID
cmpl $1,accum_2
jne L_bugged_2
#endif /* PARANOID */
/* need to subtract another once of the denom */
movl SIGL(%ebx),%eax
movl SIGH(%ebx),%edx
subl %eax,accum_0 /* Subtract from the num local reg */
sbbl %edx,accum_1
sbbl $0,accum_2
#ifdef PARANOID
jc L_bugged_2
jne L_bugged_2
#endif /* PARANOID */
addl $1,result_1 /* Correct the answer */
adcl $0,result_2
#ifdef PARANOID
jc L_bugged_2 /* Must check for non-zero result here */
#endif /* PARANOID */
/*----------------------------------------------------------------------*/
/* The division is essentially finished here, we just need to perform
tidying operations. */
/* deal with the 3rd 32 bits */
LDo_3rd_32_bits:
movl accum_1,%edx /* get the reduced num */
movl accum_0,%eax
/* need to check for possible subsequent overflow */
cmpl SIGH(%ebx),%edx /* denom*/
jb LRound_prep
ja LPrevent_3rd_overflow
cmpl SIGL(%ebx),%eax /* denom */
jb LRound_prep
LPrevent_3rd_overflow:
/* prevent overflow */
subl SIGL(%ebx),%eax
sbbl SIGH(%ebx),%edx
movl %edx,accum_1
movl %eax,accum_0
addl $1,result_1 /* Reflect the subtraction in the answer */
adcl $0,result_2
jne LRound_prep
jnc LRound_prep
/* This is a tricky spot, there is an overflow of the answer */
movb $255,ovfl_flag /* Overflow -> 1.000 */
LRound_prep:
/* Prepare for rounding.
// To test for rounding, we just need to compare 2*accum with the
// denom. */
movl accum_0,%ecx
movl accum_1,%edx
movl %ecx,%eax
orl %edx,%eax
jz LRound_ovfl /* The accumulator contains zero.*/
/* Multiply by 2 */
clc
rcll $1,%ecx
rcll $1,%edx
jc LRound_large /* No need to compare, denom smaller */
subl SIGL(%ebx),%ecx
sbbl SIGH(%ebx),%edx
jnc LRound_not_small
movl $0x70000000,%eax /* Denom was larger */
jmp LRound_ovfl
LRound_not_small:
jnz LRound_large
movl $0x80000000,%eax /* Remainder was exactly 1/2 denom */
jmp LRound_ovfl
LRound_large:
movl $0xff000000,%eax /* Denom was smaller */
LRound_ovfl:
/* We are now ready to deal with rounding, but first we must get
the bits properly aligned */
testb $255,ovfl_flag /* was the num > denom ? */
je LRound_precision
incl EXP(%edi)
/* shift the mantissa right one bit */
stc /* Will set the ms bit */
rcrl result_2
rcrl result_1
rcrl %eax
/* Round the result as required */
LRound_precision:
decl EXP(%edi) /* binary point between 1st & 2nd bits */
movl %eax,%edx
movl result_1,%ebx
movl result_2,%eax
jmp FPU_round
#ifdef PARANOID
/* The logic is wrong if we got here */
L_bugged:
pushl EX_INTERNAL|0x202
call EXCEPTION
pop %ebx
jmp L_exit
L_bugged_1:
pushl EX_INTERNAL|0x203
call EXCEPTION
pop %ebx
jmp L_exit
L_bugged_2:
pushl EX_INTERNAL|0x204
call EXCEPTION
pop %ebx
jmp L_exit
L_exit:
popl %ebx
popl %edi
popl %esi
leave
ret
#endif /* PARANOID */