adrian 3fe0beec0e Fix the half/quater rate PLL setup for AR5416, AR9160 and ...

(beta?) AR9280 chips.

Note: This doesn't "fix" half/quarter rate support for these
chips; it merely fixes an oversight.

Obtained from:	Atheros

2011-05-12 03:25:24 +00:00

..

ar2133.c

Another Howl (AR9130) fix.

2011-05-05 04:43:05 +00:00

ar5416_ani.c

Update the ext channel cycpwr threshold 1 register for the extension

2011-05-07 13:08:48 +00:00

ar5416_attach.c

Make sure the chip is awake before writing to it to finally detach

2011-05-11 13:24:17 +00:00

ar5416_beacon.c

Replace Id keyword with the FreeBSD keyword.

2010-01-29 10:07:17 +00:00

ar5416_cal_adcdc.c

Replace Id keyword with the FreeBSD keyword.

2010-01-29 10:07:17 +00:00

ar5416_cal_adcgain.c

Replace Id keyword with the FreeBSD keyword.

2010-01-29 10:07:17 +00:00

ar5416_cal_iq.c

Fix the calibration logic to correctly clamp the calculated coefficient.

2010-08-14 15:28:15 +00:00

ar5416_cal.c

Make the NF calibration logic (hopefully!) more resistive to noisy

2011-05-11 13:40:13 +00:00

ar5416_cal.h

Introduce methods for the initial calibration and the new PA calibration

2011-03-11 11:35:36 +00:00

ar5416_eeprom.c

Replace Id keyword with the FreeBSD keyword.

2010-01-29 10:07:17 +00:00

ar5416_gpio.c

Add support for the AR9285 chipset, which is found on many netbooks

2010-01-29 10:10:14 +00:00

ar5416_interrupts.c

Introduce AR9130 (HOWL) WMAC support to the FreeBSD HAL.

2011-04-28 12:47:40 +00:00

ar5416_keycache.c

Replace Id keyword with the FreeBSD keyword.

2010-01-29 10:07:17 +00:00

ar5416_misc.c

Do a HAL capabilities sync pass based on the Atheros HAL.

2011-05-07 15:30:23 +00:00

ar5416_phy.c

Modify the AR5416 11na rate table to use 24mb OFDM 11a for control traffic,

2011-02-21 05:10:34 +00:00

ar5416_power.c

Fixes from Atheros:

2011-05-12 03:15:21 +00:00

ar5416_recv.c

Add a HAL capability bit for supporting self-linked RX descriptors and disable it for the 11n chipsets.

2011-04-04 14:52:31 +00:00

ar5416_reset.c

Fix the half/quater rate PLL setup for AR5416, AR9160 and

2011-05-12 03:25:24 +00:00

ar5416_xmit.c

Bring over a few queue changes from ath9k:

2011-03-22 00:14:17 +00:00

ar5416.h

Add a function which enables or disables RX RIFS searching, and migrate

2011-05-06 15:33:56 +00:00

ar5416.ini

Bring over ar5416 inivals from Linux-2.6.34.

2010-08-10 07:48:13 +00:00

ar5416desc.h

Change AR_SREV_OWL_{X}_OR_LATER to AR_SREV_5416_{X}_OR_LATER.

2011-05-07 02:59:24 +00:00

ar5416phy.h

Update the ext channel cycpwr threshold 1 register for the extension

2011-05-07 13:08:48 +00:00

ar5416reg.h

* Add AR_SREV_KITE macro for later use

2011-05-08 15:25:22 +00:00