405ada37fb
This is needed with the pl011 driver. Before this change it would default to a shift of 0, however the hardware places the registers at 4-byte addresses meaning the value should be 2. This patch fixes this for the pl011 when configured using the fdt. The other drivers have a default value of 0 to keep this a no-op. MFC after: 1 week
577 lines
13 KiB
C
577 lines
13 KiB
C
/*-
|
|
* Copyright (c) 2014 Ganbold Tsagaankhuu <ganbold@freebsd.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/* Qualcomm MSM7K/8K uart driver */
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_ddb.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/kdb.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/fdt.h>
|
|
|
|
#include <dev/uart/uart.h>
|
|
#include <dev/uart/uart_cpu.h>
|
|
#include <dev/uart/uart_cpu_fdt.h>
|
|
#include <dev/uart/uart_bus.h>
|
|
#include <dev/uart/uart_dev_msm.h>
|
|
|
|
#include "uart_if.h"
|
|
|
|
#define DEF_CLK 7372800
|
|
|
|
#define GETREG(bas, reg) \
|
|
bus_space_read_4((bas)->bst, (bas)->bsh, (reg))
|
|
#define SETREG(bas, reg, value) \
|
|
bus_space_write_4((bas)->bst, (bas)->bsh, (reg), (value))
|
|
|
|
static int msm_uart_param(struct uart_bas *, int, int, int, int);
|
|
|
|
/*
|
|
* Low-level UART interface.
|
|
*/
|
|
static int msm_probe(struct uart_bas *bas);
|
|
static void msm_init(struct uart_bas *bas, int, int, int, int);
|
|
static void msm_term(struct uart_bas *bas);
|
|
static void msm_putc(struct uart_bas *bas, int);
|
|
static int msm_rxready(struct uart_bas *bas);
|
|
static int msm_getc(struct uart_bas *bas, struct mtx *mtx);
|
|
|
|
extern SLIST_HEAD(uart_devinfo_list, uart_devinfo) uart_sysdevs;
|
|
|
|
static int
|
|
msm_uart_param(struct uart_bas *bas, int baudrate, int databits,
|
|
int stopbits, int parity)
|
|
{
|
|
int ulcon;
|
|
|
|
ulcon = 0;
|
|
|
|
switch (databits) {
|
|
case 5:
|
|
ulcon |= (UART_DM_5_BPS << 4);
|
|
break;
|
|
case 6:
|
|
ulcon |= (UART_DM_6_BPS << 4);
|
|
break;
|
|
case 7:
|
|
ulcon |= (UART_DM_7_BPS << 4);
|
|
break;
|
|
case 8:
|
|
ulcon |= (UART_DM_8_BPS << 4);
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
switch (parity) {
|
|
case UART_PARITY_NONE:
|
|
ulcon |= UART_DM_NO_PARITY;
|
|
break;
|
|
case UART_PARITY_ODD:
|
|
ulcon |= UART_DM_ODD_PARITY;
|
|
break;
|
|
case UART_PARITY_EVEN:
|
|
ulcon |= UART_DM_EVEN_PARITY;
|
|
break;
|
|
case UART_PARITY_SPACE:
|
|
ulcon |= UART_DM_SPACE_PARITY;
|
|
break;
|
|
case UART_PARITY_MARK:
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
switch (stopbits) {
|
|
case 1:
|
|
ulcon |= (UART_DM_SBL_1 << 2);
|
|
break;
|
|
case 2:
|
|
ulcon |= (UART_DM_SBL_2 << 2);
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
uart_setreg(bas, UART_DM_MR2, ulcon);
|
|
|
|
/* Set 115200 for both TX and RX. */;
|
|
uart_setreg(bas, UART_DM_CSR, UART_DM_CSR_115200);
|
|
uart_barrier(bas);
|
|
|
|
return (0);
|
|
}
|
|
|
|
struct uart_ops uart_msm_ops = {
|
|
.probe = msm_probe,
|
|
.init = msm_init,
|
|
.term = msm_term,
|
|
.putc = msm_putc,
|
|
.rxready = msm_rxready,
|
|
.getc = msm_getc,
|
|
};
|
|
|
|
static int
|
|
msm_probe(struct uart_bas *bas)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
msm_init(struct uart_bas *bas, int baudrate, int databits, int stopbits,
|
|
int parity)
|
|
{
|
|
|
|
if (bas->rclk == 0)
|
|
bas->rclk = DEF_CLK;
|
|
|
|
KASSERT(bas->rclk != 0, ("msm_init: Invalid rclk"));
|
|
|
|
/* Set default parameters */
|
|
msm_uart_param(bas, baudrate, databits, stopbits, parity);
|
|
|
|
/*
|
|
* Configure UART mode registers MR1 and MR2.
|
|
* Hardware flow control isn't supported.
|
|
*/
|
|
uart_setreg(bas, UART_DM_MR1, 0x0);
|
|
|
|
/* Reset interrupt mask register. */
|
|
uart_setreg(bas, UART_DM_IMR, 0);
|
|
|
|
/*
|
|
* Configure Tx and Rx watermarks configuration registers.
|
|
* TX watermark value is set to 0 - interrupt is generated when
|
|
* FIFO level is less than or equal to 0.
|
|
*/
|
|
uart_setreg(bas, UART_DM_TFWR, UART_DM_TFW_VALUE);
|
|
|
|
/* Set RX watermark value */
|
|
uart_setreg(bas, UART_DM_RFWR, UART_DM_RFW_VALUE);
|
|
|
|
/*
|
|
* Configure Interrupt Programming Register.
|
|
* Set initial Stale timeout value.
|
|
*/
|
|
uart_setreg(bas, UART_DM_IPR, UART_DM_STALE_TIMEOUT_LSB);
|
|
|
|
/* Disable IRDA mode */
|
|
uart_setreg(bas, UART_DM_IRDA, 0x0);
|
|
|
|
/*
|
|
* Configure and enable sim interface if required.
|
|
* Configure hunt character value in HCR register.
|
|
* Keep it in reset state.
|
|
*/
|
|
uart_setreg(bas, UART_DM_HCR, 0x0);
|
|
|
|
/* Issue soft reset command */
|
|
SETREG(bas, UART_DM_CR, UART_DM_RESET_TX);
|
|
SETREG(bas, UART_DM_CR, UART_DM_RESET_RX);
|
|
SETREG(bas, UART_DM_CR, UART_DM_RESET_ERROR_STATUS);
|
|
SETREG(bas, UART_DM_CR, UART_DM_RESET_BREAK_INT);
|
|
SETREG(bas, UART_DM_CR, UART_DM_RESET_STALE_INT);
|
|
|
|
/* Enable/Disable Rx/Tx DM interfaces */
|
|
/* Disable Data Mover for now. */
|
|
uart_setreg(bas, UART_DM_DMEN, 0x0);
|
|
|
|
/* Enable transmitter and receiver */
|
|
uart_setreg(bas, UART_DM_CR, UART_DM_CR_RX_ENABLE);
|
|
uart_setreg(bas, UART_DM_CR, UART_DM_CR_TX_ENABLE);
|
|
|
|
uart_barrier(bas);
|
|
}
|
|
|
|
static void
|
|
msm_term(struct uart_bas *bas)
|
|
{
|
|
|
|
/* XXX */
|
|
}
|
|
|
|
static void
|
|
msm_putc(struct uart_bas *bas, int c)
|
|
{
|
|
int limit;
|
|
|
|
/*
|
|
* Write to NO_CHARS_FOR_TX register the number of characters
|
|
* to be transmitted. However, before writing TX_FIFO must
|
|
* be empty as indicated by TX_READY interrupt in IMR register
|
|
*/
|
|
|
|
/*
|
|
* Check if transmit FIFO is empty.
|
|
* If not wait for TX_READY interrupt.
|
|
*/
|
|
limit = 1000;
|
|
if (!(uart_getreg(bas, UART_DM_SR) & UART_DM_SR_TXEMT)) {
|
|
while ((uart_getreg(bas, UART_DM_ISR) & UART_DM_TX_READY) == 0
|
|
&& --limit)
|
|
DELAY(4);
|
|
}
|
|
/* FIFO is ready, write number of characters to be written */
|
|
uart_setreg(bas, UART_DM_NO_CHARS_FOR_TX, 1);
|
|
|
|
/* Wait till TX FIFO has space */
|
|
while ((uart_getreg(bas, UART_DM_SR) & UART_DM_SR_TXRDY) == 0)
|
|
DELAY(4);
|
|
|
|
/* TX FIFO has space. Write char */
|
|
SETREG(bas, UART_DM_TF(0), (c & 0xff));
|
|
}
|
|
|
|
static int
|
|
msm_rxready(struct uart_bas *bas)
|
|
{
|
|
|
|
/* Wait for a character to come ready */
|
|
return ((uart_getreg(bas, UART_DM_SR) & UART_DM_SR_RXRDY) ==
|
|
UART_DM_SR_RXRDY);
|
|
}
|
|
|
|
static int
|
|
msm_getc(struct uart_bas *bas, struct mtx *mtx)
|
|
{
|
|
int c;
|
|
|
|
uart_lock(mtx);
|
|
|
|
/* Wait for a character to come ready */
|
|
while ((uart_getreg(bas, UART_DM_SR) & UART_DM_SR_RXRDY) !=
|
|
UART_DM_SR_RXRDY)
|
|
DELAY(4);
|
|
|
|
/* Check for Overrun error. If so reset Error Status */
|
|
if (uart_getreg(bas, UART_DM_SR) & UART_DM_SR_UART_OVERRUN)
|
|
uart_setreg(bas, UART_DM_CR, UART_DM_RESET_ERROR_STATUS);
|
|
|
|
/* Read char */
|
|
c = uart_getreg(bas, UART_DM_RF(0));
|
|
|
|
uart_unlock(mtx);
|
|
|
|
return (c);
|
|
}
|
|
|
|
/*
|
|
* High-level UART interface.
|
|
*/
|
|
struct msm_uart_softc {
|
|
struct uart_softc base;
|
|
uint32_t ier;
|
|
};
|
|
|
|
static int msm_bus_probe(struct uart_softc *sc);
|
|
static int msm_bus_attach(struct uart_softc *sc);
|
|
static int msm_bus_flush(struct uart_softc *, int);
|
|
static int msm_bus_getsig(struct uart_softc *);
|
|
static int msm_bus_ioctl(struct uart_softc *, int, intptr_t);
|
|
static int msm_bus_ipend(struct uart_softc *);
|
|
static int msm_bus_param(struct uart_softc *, int, int, int, int);
|
|
static int msm_bus_receive(struct uart_softc *);
|
|
static int msm_bus_setsig(struct uart_softc *, int);
|
|
static int msm_bus_transmit(struct uart_softc *);
|
|
static void msm_bus_grab(struct uart_softc *);
|
|
static void msm_bus_ungrab(struct uart_softc *);
|
|
|
|
static kobj_method_t msm_methods[] = {
|
|
KOBJMETHOD(uart_probe, msm_bus_probe),
|
|
KOBJMETHOD(uart_attach, msm_bus_attach),
|
|
KOBJMETHOD(uart_flush, msm_bus_flush),
|
|
KOBJMETHOD(uart_getsig, msm_bus_getsig),
|
|
KOBJMETHOD(uart_ioctl, msm_bus_ioctl),
|
|
KOBJMETHOD(uart_ipend, msm_bus_ipend),
|
|
KOBJMETHOD(uart_param, msm_bus_param),
|
|
KOBJMETHOD(uart_receive, msm_bus_receive),
|
|
KOBJMETHOD(uart_setsig, msm_bus_setsig),
|
|
KOBJMETHOD(uart_transmit, msm_bus_transmit),
|
|
KOBJMETHOD(uart_grab, msm_bus_grab),
|
|
KOBJMETHOD(uart_ungrab, msm_bus_ungrab),
|
|
{0, 0 }
|
|
};
|
|
|
|
int
|
|
msm_bus_probe(struct uart_softc *sc)
|
|
{
|
|
|
|
sc->sc_txfifosz = 64;
|
|
sc->sc_rxfifosz = 64;
|
|
|
|
device_set_desc(sc->sc_dev, "Qualcomm HSUART");
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
msm_bus_attach(struct uart_softc *sc)
|
|
{
|
|
struct msm_uart_softc *u = (struct msm_uart_softc *)sc;
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
|
|
sc->sc_hwiflow = 0;
|
|
sc->sc_hwoflow = 0;
|
|
|
|
/* Set TX_READY, TXLEV, RXLEV, RXSTALE */
|
|
u->ier = UART_DM_IMR_ENABLED;
|
|
|
|
/* Configure Interrupt Mask register IMR */
|
|
uart_setreg(bas, UART_DM_IMR, u->ier);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Write the current transmit buffer to the TX FIFO.
|
|
*/
|
|
static int
|
|
msm_bus_transmit(struct uart_softc *sc)
|
|
{
|
|
struct msm_uart_softc *u = (struct msm_uart_softc *)sc;
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
int i;
|
|
|
|
uart_lock(sc->sc_hwmtx);
|
|
|
|
/* Write some data */
|
|
for (i = 0; i < sc->sc_txdatasz; i++) {
|
|
/* Write TX data */
|
|
msm_putc(bas, sc->sc_txbuf[i]);
|
|
uart_barrier(bas);
|
|
}
|
|
|
|
/* TX FIFO is empty now, enable TX_READY interrupt */
|
|
u->ier |= UART_DM_TX_READY;
|
|
SETREG(bas, UART_DM_IMR, u->ier);
|
|
uart_barrier(bas);
|
|
|
|
/*
|
|
* Inform upper layer that it is transmitting data to hardware,
|
|
* this will be cleared when TXIDLE interrupt occurs.
|
|
*/
|
|
sc->sc_txbusy = 1;
|
|
uart_unlock(sc->sc_hwmtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
msm_bus_setsig(struct uart_softc *sc, int sig)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
msm_bus_receive(struct uart_softc *sc)
|
|
{
|
|
struct msm_uart_softc *u = (struct msm_uart_softc *)sc;
|
|
struct uart_bas *bas;
|
|
int c;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
|
|
/* Initialize Receive Path and interrupt */
|
|
SETREG(bas, UART_DM_CR, UART_DM_RESET_STALE_INT);
|
|
SETREG(bas, UART_DM_CR, UART_DM_STALE_EVENT_ENABLE);
|
|
u->ier |= UART_DM_RXLEV;
|
|
SETREG(bas, UART_DM_IMR, u->ier);
|
|
|
|
/* Loop over until we are full, or no data is available */
|
|
while (uart_getreg(bas, UART_DM_SR) & UART_DM_SR_RXRDY) {
|
|
if (uart_rx_full(sc)) {
|
|
/* No space left in input buffer */
|
|
sc->sc_rxbuf[sc->sc_rxput] = UART_STAT_OVERRUN;
|
|
break;
|
|
}
|
|
|
|
/* Read RX FIFO */
|
|
c = uart_getreg(bas, UART_DM_RF(0));
|
|
uart_barrier(bas);
|
|
|
|
uart_rx_put(sc, c);
|
|
}
|
|
|
|
uart_unlock(sc->sc_hwmtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
msm_bus_param(struct uart_softc *sc, int baudrate, int databits,
|
|
int stopbits, int parity)
|
|
{
|
|
int error;
|
|
|
|
if (sc->sc_bas.rclk == 0)
|
|
sc->sc_bas.rclk = DEF_CLK;
|
|
|
|
KASSERT(sc->sc_bas.rclk != 0, ("msm_init: Invalid rclk"));
|
|
|
|
uart_lock(sc->sc_hwmtx);
|
|
error = msm_uart_param(&sc->sc_bas, baudrate, databits, stopbits,
|
|
parity);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
msm_bus_ipend(struct uart_softc *sc)
|
|
{
|
|
struct msm_uart_softc *u = (struct msm_uart_softc *)sc;
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
uint32_t isr;
|
|
int ipend;
|
|
|
|
uart_lock(sc->sc_hwmtx);
|
|
|
|
/* Get ISR status */
|
|
isr = GETREG(bas, UART_DM_MISR);
|
|
|
|
ipend = 0;
|
|
|
|
/* Uart RX starting, notify upper layer */
|
|
if (isr & UART_DM_RXLEV) {
|
|
u->ier &= ~UART_DM_RXLEV;
|
|
SETREG(bas, UART_DM_IMR, u->ier);
|
|
uart_barrier(bas);
|
|
ipend |= SER_INT_RXREADY;
|
|
}
|
|
|
|
/* Stale RX interrupt */
|
|
if (isr & UART_DM_RXSTALE) {
|
|
/* Disable and reset it */
|
|
SETREG(bas, UART_DM_CR, UART_DM_STALE_EVENT_DISABLE);
|
|
SETREG(bas, UART_DM_CR, UART_DM_RESET_STALE_INT);
|
|
uart_barrier(bas);
|
|
ipend |= SER_INT_RXREADY;
|
|
}
|
|
|
|
/* TX READY interrupt */
|
|
if (isr & UART_DM_TX_READY) {
|
|
/* Clear TX Ready */
|
|
SETREG(bas, UART_DM_CR, UART_DM_CLEAR_TX_READY);
|
|
|
|
/* Disable TX_READY */
|
|
u->ier &= ~UART_DM_TX_READY;
|
|
SETREG(bas, UART_DM_IMR, u->ier);
|
|
uart_barrier(bas);
|
|
|
|
if (sc->sc_txbusy != 0)
|
|
ipend |= SER_INT_TXIDLE;
|
|
}
|
|
|
|
if (isr & UART_DM_TXLEV) {
|
|
/* TX FIFO is empty */
|
|
u->ier &= ~UART_DM_TXLEV;
|
|
SETREG(bas, UART_DM_IMR, u->ier);
|
|
uart_barrier(bas);
|
|
|
|
if (sc->sc_txbusy != 0)
|
|
ipend |= SER_INT_TXIDLE;
|
|
}
|
|
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (ipend);
|
|
}
|
|
|
|
static int
|
|
msm_bus_flush(struct uart_softc *sc, int what)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
msm_bus_getsig(struct uart_softc *sc)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
msm_bus_ioctl(struct uart_softc *sc, int request, intptr_t data)
|
|
{
|
|
|
|
return (EINVAL);
|
|
}
|
|
|
|
static void
|
|
msm_bus_grab(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
|
|
/*
|
|
* XXX: Turn off all interrupts to enter polling mode. Leave the
|
|
* saved mask alone. We'll restore whatever it was in ungrab.
|
|
*/
|
|
uart_lock(sc->sc_hwmtx);
|
|
SETREG(bas, UART_DM_CR, UART_DM_RESET_STALE_INT);
|
|
SETREG(bas, UART_DM_IMR, 0);
|
|
uart_barrier(bas);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
}
|
|
|
|
static void
|
|
msm_bus_ungrab(struct uart_softc *sc)
|
|
{
|
|
struct msm_uart_softc *u = (struct msm_uart_softc *)sc;
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
|
|
/*
|
|
* Restore previous interrupt mask
|
|
*/
|
|
uart_lock(sc->sc_hwmtx);
|
|
SETREG(bas, UART_DM_IMR, u->ier);
|
|
uart_barrier(bas);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
}
|
|
|
|
static struct uart_class uart_msm_class = {
|
|
"msm",
|
|
msm_methods,
|
|
sizeof(struct msm_uart_softc),
|
|
.uc_ops = &uart_msm_ops,
|
|
.uc_range = 8,
|
|
.uc_rclk = DEF_CLK,
|
|
.uc_rshift = 0
|
|
};
|
|
|
|
static struct ofw_compat_data compat_data[] = {
|
|
{"qcom,msm-uartdm", (uintptr_t)&uart_msm_class},
|
|
{NULL, (uintptr_t)NULL},
|
|
};
|
|
UART_FDT_CLASS_AND_DEVICE(compat_data);
|